-- ============================================================================= -- Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. -- -- Description: -- The file defines a MIB to provide spectrum analysis information. -- Reference: -- Version: V1.0 -- History: -- V1.0 Created by Wang Lu -- Initial version 2011-08-05 -- ============================================================================= HPN-ICF-DOT11-SA-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, DateAndTime FROM SNMPv2-TC MODULE-IDENTITY, Integer32, Unsigned32, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI hpnicfDot11, HpnicfDot11ChannelScopeType, HpnicfDot11ObjectIDType, HpnicfDot11RadioScopeType, HpnicfDot11SaIntfDevType FROM HPN-ICF-DOT11-REF-MIB; hpnicfDot11Sa MODULE-IDENTITY LAST-UPDATED "201108262000Z" -- Aug 26, 2011 at 20:00 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB module provides spectrum analysis information. The initial revision of this MIB module. The spectrum analysis module on APs is able to examine the radio frequency (RF) environment in which the Wi-Fi network is operating, identify interference and classify its sources. An analysis of the results can then be used to quickly isolate issues with packet transmission, channel quality, and traffic congestion caused by contention with other devices operating in the same band or channel." REVISION "201108262000Z" DESCRIPTION "The initial revision of this MIB module." ::= { hpnicfDot11 13 } -- ***************************************************************************** -- * Major sections -- ***************************************************************************** hpnicfDot11SaCfgGroup OBJECT IDENTIFIER ::= { hpnicfDot11Sa 1 } hpnicfDot11SaStatusGroup OBJECT IDENTIFIER ::= { hpnicfDot11Sa 2 } hpnicfDot11SaNotifyGroup OBJECT IDENTIFIER ::= { hpnicfDot11Sa 3 } -- cfg table hpnicfDot11SaCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11SaCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure spectrum analysis." ::= { hpnicfDot11SaCfgGroup 1 } hpnicfDot11SaCfgEntry OBJECT-TYPE SYNTAX HpnicfDot11SaCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the spectrum analysis configuration." INDEX { hpnicfDot11SaCfgRadioType } ::= { hpnicfDot11SaCfgTable 1 } HpnicfDot11SaCfgEntry ::= SEQUENCE { hpnicfDot11SaCfgRadioType INTEGER, hpnicfDot11SaEnable TruthValue, hpnicfDot11SaRptDevType BITS, hpnicfDot11SaTrapDevEnable TruthValue, hpnicfDot11SaTrapDevType BITS, hpnicfDot11SaTrapAQEnable TruthValue, hpnicfDot11SaTrapAQThreshold Integer32, hpnicfDot11SaDrivenRRMEnable TruthValue, hpnicfDot11SaDrivenRRMSnt INTEGER } hpnicfDot11SaCfgRadioType OBJECT-TYPE SYNTAX INTEGER { dot11bg(1), dot11a(2) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the radio type of the configuration." ::= { hpnicfDot11SaCfgEntry 1 } hpnicfDot11SaEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether spectrum analysis is enabled globally." ::= { hpnicfDot11SaCfgEntry 2 } hpnicfDot11SaRptDevType OBJECT-TYPE SYNTAX BITS { microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which types of interference devices should be reported." ::= { hpnicfDot11SaCfgEntry 3 } hpnicfDot11SaTrapDevEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the interference device trap is enabled." ::= { hpnicfDot11SaCfgEntry 4 } hpnicfDot11SaTrapDevType OBJECT-TYPE SYNTAX BITS { microwave(0), microwaveInverter(1), bluetooth(2), fixedFreqOthers(3), fixedFreqCordlessPhone(4), fixedFreqVideo(5), fixedFreqAudio(6), freqHopperOthers(7), freqHopperCordlessBase(8), freqHopperCordlessNetwork(9), freqHopperXbox(10), genericInterferer(11) } MAX-ACCESS read-write STATUS current DESCRIPTION "Represents which types of interference device will send traps when the interference device trap is enabled." ::= { hpnicfDot11SaCfgEntry 5 } hpnicfDot11SaTrapAQEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Represents whether the air quality trap is enabled." ::= { hpnicfDot11SaCfgEntry 6 } hpnicfDot11SaTrapAQThreshold OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Represents the air quality trap threshold. When the air quality is below this value, the air quality trap will be sent." ::= { hpnicfDot11SaCfgEntry 7 } hpnicfDot11SaDrivenRRMEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Configure whether to trigger RRM to run when an access point detects a certain level of interference." ::= { hpnicfDot11SaCfgEntry 8 } hpnicfDot11SaDrivenRRMSnt OBJECT-TYPE SYNTAX INTEGER { low(1), medium(2), high(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Configure the threshold at which RRM will be triggered. When the interference level for the access point rises above the threshold level, RRM initiates a local dynamic channel assignment (DCA) run and changes the channel of the affected access point radio if possible to improve network performance. Low represents a decreased sensitivity to changes in the environment while high represents an increased sensitivity." ::= { hpnicfDot11SaCfgEntry 9 } -- fft table hpnicfDot11SaRtFFTDataTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11SaRtFFTDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the real-time FFT data for spectrum analysis." ::= { hpnicfDot11SaStatusGroup 1 } hpnicfDot11SaRtFFTDataEntry OBJECT-TYPE SYNTAX HpnicfDot11SaRtFFTDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the real-time FFT data for spectrum analysis." INDEX { hpnicfDot11SaAPID, hpnicfDot11SaRadioID, hpnicfDot11SaRtDataGroupID, hpnicfDot11SaFrequency } ::= { hpnicfDot11SaRtFFTDataTable 1 } HpnicfDot11SaRtFFTDataEntry ::= SEQUENCE { hpnicfDot11SaAPID HpnicfDot11ObjectIDType, hpnicfDot11SaRadioID HpnicfDot11RadioScopeType, hpnicfDot11SaRtDataGroupID Integer32, hpnicfDot11SaFrequency Integer32, hpnicfDot11SaRtFreqPower Integer32, hpnicfDot11SaRtFreqMaxPower Integer32, hpnicfDot11SaRtFreqDutyCycle Integer32, hpnicfDot11SaRtFreqDataSeqNo Unsigned32 } hpnicfDot11SaAPID OBJECT-TYPE SYNTAX HpnicfDot11ObjectIDType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the serial ID of the AP." ::= { hpnicfDot11SaRtFFTDataEntry 1 } hpnicfDot11SaRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the ID of the radio." ::= { hpnicfDot11SaRtFFTDataEntry 2 } hpnicfDot11SaRtDataGroupID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents group ID of the collected data. Maybe the device collects multiple groups of data at the collected interval." ::= { hpnicfDot11SaRtFFTDataEntry 3 } hpnicfDot11SaFrequency OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the frequency number in 100 Hz." ::= { hpnicfDot11SaRtFFTDataEntry 4 } hpnicfDot11SaRtFreqPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the power of the frequency point." ::= { hpnicfDot11SaRtFFTDataEntry 5 } hpnicfDot11SaRtFreqMaxPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the max power of the frequency point." ::= { hpnicfDot11SaRtFFTDataEntry 6 } hpnicfDot11SaRtFreqDutyCycle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the duty cycle of the frequency point." ::= { hpnicfDot11SaRtFFTDataEntry 7 } hpnicfDot11SaRtFreqDataSeqNo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the sequence number of the data." ::= { hpnicfDot11SaRtFFTDataEntry 8 } -- interfering device table hpnicfDot11SaIntfDevTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11SaIntfDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information of the interfering devices." ::= { hpnicfDot11SaStatusGroup 2 } hpnicfDot11SaIntfDevEntry OBJECT-TYPE SYNTAX HpnicfDot11SaIntfDevEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the information of the interfering devices." INDEX { hpnicfDot11SaAPID, hpnicfDot11SaRadioID, hpnicfDot11SaDevID } ::= { hpnicfDot11SaIntfDevTable 1 } HpnicfDot11SaIntfDevEntry ::= SEQUENCE { hpnicfDot11SaDevID Integer32, hpnicfDot11SaDevType HpnicfDot11SaIntfDevType, hpnicfDot11SaDevSI Integer32, hpnicfDot11SaDevRSSI Integer32, hpnicfDot11SaDevDutyCycle Integer32, hpnicfDot11SaDevAffectedChls OCTET STRING, hpnicfDot11SaDevDetectedTime DateAndTime } hpnicfDot11SaDevID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the device identification number that uniquely identified the interfering device." ::= { hpnicfDot11SaIntfDevEntry 1 } hpnicfDot11SaDevType OBJECT-TYPE SYNTAX HpnicfDot11SaIntfDevType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents type of the interferer." ::= { hpnicfDot11SaIntfDevEntry 2 } hpnicfDot11SaDevSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe)." ::= { hpnicfDot11SaIntfDevEntry 3 } hpnicfDot11SaDevRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents receive signal strength indicator (RSSI) of interfering device." ::= { hpnicfDot11SaIntfDevEntry 4 } hpnicfDot11SaDevDutyCycle OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents proportion of time in percentage during which the interfering device was active." ::= { hpnicfDot11SaIntfDevEntry 5 } hpnicfDot11SaDevAffectedChls OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents channels that the interfering device affects." ::= { hpnicfDot11SaIntfDevEntry 6 } hpnicfDot11SaDevDetectedTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "Represents time at which the interference was detected." ::= { hpnicfDot11SaIntfDevEntry 7 } -- air quality table hpnicfDot11SaAirQualityTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11SaAirQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the air quality of the channels." ::= { hpnicfDot11SaStatusGroup 3 } hpnicfDot11SaAirQualityEntry OBJECT-TYPE SYNTAX HpnicfDot11SaAirQualityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the air quality of the channels." INDEX { hpnicfDot11SaAPID, hpnicfDot11SaRadioID, hpnicfDot11SaChlNum } ::= { hpnicfDot11SaAirQualityTable 1 } HpnicfDot11SaAirQualityEntry ::= SEQUENCE { hpnicfDot11SaChlNum HpnicfDot11ChannelScopeType, hpnicfDot11SaAvgQuality Integer32, hpnicfDot11SaMinQuality Integer32, hpnicfDot11SaIntfDevNum Integer32, hpnicfDot11SaWiFiUtil Integer32, hpnicfDot11SaNonWiFiUtil Integer32, hpnicfDot11SaNoiseFloor Integer32 } hpnicfDot11SaChlNum OBJECT-TYPE SYNTAX HpnicfDot11ChannelScopeType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the radio channel where the air quality is monitored." ::= { hpnicfDot11SaAirQualityEntry 1 } hpnicfDot11SaAvgQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the average air quality for this radio channel." ::= { hpnicfDot11SaAirQualityEntry 2 } hpnicfDot11SaMinQuality OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the minimum air quality for this radio channel." ::= { hpnicfDot11SaAirQualityEntry 3 } hpnicfDot11SaIntfDevNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band." ::= { hpnicfDot11SaAirQualityEntry 4 } hpnicfDot11SaWiFiUtil OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the percentage of the channel currently being used by Wi-Fi devices." ::= { hpnicfDot11SaAirQualityEntry 5 } hpnicfDot11SaNonWiFiUtil OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the percentage of the channel currently being used by non-Wi-Fi interference." ::= { hpnicfDot11SaAirQualityEntry 6 } hpnicfDot11SaNoiseFloor OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents current noise floor recorded on the channel." ::= { hpnicfDot11SaAirQualityEntry 7 } --Notify Group hpnicfDot11SaTraps OBJECT IDENTIFIER ::= { hpnicfDot11SaNotifyGroup 0 } hpnicfDot11SaIntfDevDetected NOTIFICATION-TYPE OBJECTS { hpnicfDot11SaTrapAPID, hpnicfDot11SaTrapRadioID, hpnicfDot11SaTrapDevID, hpnicfDot11SaTrapIntfDevType, hpnicfDot11APTrapDevSI, hpnicfDot11SaTrapDevRSSI, hpnicfDot11APTrapDevDC, hpnicfDot11APTrapDevChls, hpnicfDot11APTrapDevDctTime } STATUS current DESCRIPTION "Interfering device is detected." ::= { hpnicfDot11SaTraps 1 } hpnicfDot11SaIntfDevDisappear NOTIFICATION-TYPE OBJECTS { hpnicfDot11SaTrapAPID, hpnicfDot11SaTrapRadioID, hpnicfDot11SaTrapDevID, hpnicfDot11SaTrapIntfDevType } STATUS current DESCRIPTION "Interfering device disappeared." ::= { hpnicfDot11SaTraps 2 } hpnicfDot11SaChlQltLow NOTIFICATION-TYPE OBJECTS { hpnicfDot11SaTrapAPID, hpnicfDot11SaTrapRadioID, hpnicfDot11SaTrapChlNum, hpnicfDot11SaTrapChlQlt, hpnicfDot11SaTrapChlIntfNum } STATUS current DESCRIPTION "The quality of the channel is below the specified threshold." ::= { hpnicfDot11SaTraps 3 } hpnicfDot11SaChlQltRecover NOTIFICATION-TYPE OBJECTS { hpnicfDot11SaTrapAPID, hpnicfDot11SaTrapRadioID, hpnicfDot11SaTrapChlNum, hpnicfDot11SaTrapChlQlt, hpnicfDot11SaTrapChlIntfNum } STATUS current DESCRIPTION "The quality of the channel recovered from low status." ::= { hpnicfDot11SaTraps 4 } hpnicfDot11SaTrapVars OBJECT IDENTIFIER ::= { hpnicfDot11SaNotifyGroup 1 } hpnicfDot11SaTrapAPID OBJECT-TYPE SYNTAX HpnicfDot11ObjectIDType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the identifier of the AP." ::= { hpnicfDot11SaTrapVars 1 } hpnicfDot11SaTrapRadioID OBJECT-TYPE SYNTAX HpnicfDot11RadioScopeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the identifier of the radio." ::= { hpnicfDot11SaTrapVars 2 } hpnicfDot11SaTrapDevID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the device identification number that uniquely identified the interfering device." ::= { hpnicfDot11SaTrapVars 3 } hpnicfDot11SaTrapIntfDevType OBJECT-TYPE SYNTAX HpnicfDot11SaIntfDevType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents type of the interferer." ::= { hpnicfDot11SaTrapVars 4 } hpnicfDot11APTrapDevSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents severity index of the interfering device. Severity index is calculated, a positive integer between 0 and 100(with 100 being the most severe)." ::= { hpnicfDot11SaTrapVars 5 } hpnicfDot11SaTrapDevRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents receive signal strength indicator (RSSI) of interfering device." ::= { hpnicfDot11SaTrapVars 6 } hpnicfDot11APTrapDevDC OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents proportion of time in percentage during which the interfering device was active." ::= { hpnicfDot11SaTrapVars 7 } hpnicfDot11APTrapDevChls OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents channels that the interfering device affects." ::= { hpnicfDot11SaTrapVars 8 } hpnicfDot11APTrapDevDctTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents time at which the interference was detected." ::= { hpnicfDot11SaTrapVars 9 } hpnicfDot11SaTrapChlNum OBJECT-TYPE SYNTAX HpnicfDot11ChannelScopeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the radio channel where the air quality is monitored." ::= { hpnicfDot11SaTrapVars 10 } hpnicfDot11SaTrapChlQlt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the quality for this radio channel." ::= { hpnicfDot11SaTrapVars 11 } hpnicfDot11SaTrapChlIntfNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Represents the number of interferers detected by the radios on the 802.11a/n or 802.11b/g/n radio band." ::= { hpnicfDot11SaTrapVars 12 } END