-- ============================================================================= -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: -- The file defines a MIB to provide root node and TC for 802.11 MIB series. -- Reference: -- Version: V2.0 -- History: -- V1.0 created by shiyang (Richard) -- Initial version 2006-05-10 -- V1.1 2007-04-27 modified by shiyang(Richard) -- Add "none" and "all" enumerate for HpnicfDot11AuthenType. -- Add HpnicfDot11RFModeType. -- Add none(1) for HpnicfDot11AKMType. -- V1.2 2007-06-21 modified by Vikas K -- Added HpnicfDot11AssocFailType. -- Added HpnicfDot11AuthorFailType. -- Added HpnicfDot11QosAcType. -- V1.3 2008-8-23 modified by Wang Lu -- Add HpnicfDot11RadioElementIndex -- Add enumerations to HpnicfDot11RadioType. -- Remove hyphen in enumerations of HpnicfDot11QosAcType. -- Add hpnicfDot11ElementGroup. -- V1.4 2008-11-18 modified by Wang Lu -- Add HpnicfDot11WorkMode and HpnicfDot11CirMode -- V1.5 2009-05-07 modified by Wang Shaojie -- Modify HpnicfDot11SSIDEncryptModeType -- V1.6 2010-01-07 modified by Wang Shaojie -- Modify HpnicfDot11SecIEStatusType, HpnicfDot11CipherType -- 2010-03-18 modified by Wang Lu -- Modify HpnicfDot11AKMType and HpnicfDot11CipherType -- V1.7 2011-08-10 modified by limingjin -- Add HpnicfDot11RadioType2 -- V1.8 2011-08-26 modified by Wang Lu -- Add HpnicfDot11SaIntfDevType -- V1.9 2013-12-21 modified by wubin -- Modify HpnicfDot11RadioType, HpnicfDot11RadioType2 -- V2.0 2014-02-14 modified by Xiao min -- Add HpnicfDot11TruthValueCM -- ============================================================================= HPN-ICF-DOT11-REF-MIB DEFINITIONS ::= BEGIN IMPORTS TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, Integer32, Unsigned32, OBJECT-TYPE FROM SNMPv2-SMI hpnicfCommon FROM HPN-ICF-OID-MIB; hpnicfDot11 MODULE-IDENTITY LAST-UPDATED "201001072000Z" -- Jan 7, 2009 at 20:00 GMT ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "This MIB defines the root node and TC for 802.11 features. By this way, the MIB series for 802.11 will be easily maintained. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11a This is a high speed physical layer extension to the 802.11 standard on the 5 GHz band. IEEE 802.11b High-rate wireless LAN standard for wireless data transfer at up to 11 Mbps. IEEE 802.11g Higher Speed Physical Layer (PHY) Extension to IEEE 802.11b, will boost wireless LAN speed to 54 Mbps by using OFDM (orthogonal frequency division multiplexing). The IEEE 802.11g specification is backward compatible with the widely deployed IEEE 802.11b standard. When configure radio with as bg mode, it means that radio will be compatible to 802.11b and 802.11g. When configure radio with as g mode, it means that radio will be only compatible to 802.11g. IEEE 802.11i As 802.11 has lot of deficiency in wireless security domain, especially for enterprise custom, IEEE defined a new standard 802.11i to extend security feature of 802.11 standard. AKM The authentication and key management method defined by 802.11i, and which includes 802.1x and pre-shared key." REVISION "201001072000Z" -- Jan 7, 2010 at 20:00 GMT DESCRIPTION "Modified for CMCC of GuangDong province." REVISION "200905072000Z" -- May 7, 2009 at 20:00 GMT DESCRIPTION "Modified for CMCC of GuangDong province." REVISION "200706212000Z" -- Jun 21, 2007 at 20:00 GMT DESCRIPTION "Modified for CMCC(China Mobile Communication Corporation) requirements." REVISION "200704272000Z" -- Apr 27, 2007 at 20:00 GMT DESCRIPTION "Modified to add new TC." REVISION "200605101900Z" -- May 10, 2006 at 19:00 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hpnicfCommon 75 } -- ***************************************************************************** -- * Textual conventions from 802 definitions -- ***************************************************************************** -- Common TEXTUAL-CONVENTION HpnicfDot11ObjectIDType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents AP identifier value type." SYNTAX OCTET STRING(SIZE(0..127)) HpnicfDot11RadioScopeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents radio value scope." SYNTAX Integer32 HpnicfDot11RadioType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents AP 802.11 radio type of 802.11a/b/g/n/ac as per the standard. The following values are supported: dot11a - 802.11a dot11b - 802.11b dot11g - 802.11g dot11n - 802.11n dot11gn - 802.11gn dot11an - 802.11an dot11ac - 802.11ac " SYNTAX INTEGER { dot11a(1), dot11b(2), dot11g(4), dot11n(8), dot11gn(16), dot11an(32), dot11ac(64) } HpnicfDot11RadioType2 ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents AP 802.11 radio type of 802.11a/b/g/an/gn/ac as per the standard. The following values are supported: dot11a - 802.11a dot11b - 802.11b dot11g - 802.11g dot11an - 802.11an dot11gn - 802.11gn dot11ac - 802.11ac " SYNTAX INTEGER { dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16), dot11ac(32) } HpnicfDot11MACModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "CAPWAP defines three kinds MAC modes for fit AP. The management packet will be exchanged between AP and AC by CAPWAP control tunnel. For data packet, the following MAC mode are supported: split - AP will tunnel 802.11 data message - to AC by CAPWAP, localtunnel - AP will convert data to 802.3, then tunnel - it to AC by CAPWAP, localbridge - AP will directly handle data packet without - sending to AC to process, fatAP - For fat AP, it will handle all 802.11 frames - by itself." SYNTAX INTEGER { split(1), localtunnel(2), localbridge(3), fatAP(4) } HpnicfDot11ChannelScopeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the channel scope which consists of 802.11a/b/g." SYNTAX Integer32 HpnicfDot11NotifyReasonType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The explanation string is for the event notification of dot11." SYNTAX OCTET STRING(SIZE(0..255)) HpnicfDot11SSIDStringType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SSID is a string to identify ESS for wireless network." SYNTAX OCTET STRING HpnicfDot11ServicePolicyIDType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the type of service policy ID." SYNTAX Integer32 HpnicfDot11SSIDEncryptModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents encryption mode for the specific ESS: The following values are supported: cleartxt - clear txt, cipher - WPA and 802.11i, ext - ext." SYNTAX INTEGER { cleartxt(1), cipher(2), ext(3) } HpnicfDot11PreambleType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the current radio preamble type. The following values are supported: long - long preambles, short - short preambles." SYNTAX INTEGER { long(1), short(2) } HpnicfDot11TxPwrLevelScopeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the Tx power level scope for 802.11." SYNTAX Integer32 HpnicfDot11RFModeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents RF management mode. The following values are supported: manual - Configure RF parameter by manual, auto - Automaticall configure." SYNTAX INTEGER { manual(1), auto(2) } -- CAPWAP TEXTUAL-CONVENTION HpnicfDot11TunnelSecSchemType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents which security scheme option is available for CAPWAP tunnel. The following values are supported: cleartxt - No encryption protection, dtls - Encrypted by DTLS, ipsec - Encrypted by IPSEC." SYNTAX INTEGER { cleartxt(1), dtls(2), ipsec(3) } -- 802.11i TEXTUAL-CONVENTION HpnicfDot11SecIEStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "To enable the WPA Information element in the beacon and probe response frames sent by AP. The following values are supported: none - both wpa and rsn are disabled, rsn - only enable rsn, wpa - only enable wpa, all - both wpa and rsn are enabled, ext - only enable ext." SYNTAX INTEGER { none(1), rsn(2), wpa(3), all(4), ext(5) } HpnicfDot11CipherType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the frame encryption cipher types for frames on IEEE 802.11 radio interfaces. The MIB defines TC by referring to the 802.11i protocol. The following values are supported: none - clear text or no cipher method is configure, wep40 - 40-bit WEP key, tkip - WPA Temporal Key encryption, aesccmp - WPA AES CCMP encryption, wep104 - 104-bit WEP key, wpisms4 - ext encryption, wep128 - 128-bit WEP key." SYNTAX INTEGER { none(1), wep40(2), tkip(4), aesccmp(16), wep104(32), wpisms4(64), wep128(128) } HpnicfDot11AuthenType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the Authentication mode defined by 802.11. The following values are supported: none - No authentication mode configured, opensystem - In fact,no real authentication happened, sharedkey - System will use challenge message to - authenticate the access user, all - both open system and shared key." SYNTAX INTEGER { none(1), opensystem(2), sharedkey(3), all(4) } HpnicfDot11AKMType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the key management mode defined by 802.11i. The following values are supported: none - No key management mode configured, psk - pre-shared key authentication, dot1x - 802.1x authentication, ext - ext." SYNTAX INTEGER { none(1), psk(2), dot1x(3), ext(4) } HpnicfDot11AssocFailType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for station association failure. including: unknownfailure - unknown failure, toomanyassoc - too many association, invalidie - information element is invalid, unsupportedrate - rate is not supported, unsupportedpwrcap - power capability is not supported, unsupportedcap - capability is not supported" SYNTAX INTEGER { unknownfailure(1), toomanyassoc(2), invalidie(3), unsupportedrate(4), unsupportedpwrcap(5), unsupportedcap(6) } HpnicfDot11AuthorFailType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for station authorization failure. including: unknownfailure - unknown failure, invalidie - information element is invalid, rsnieversionunsupported - rsn information element version is not supported, wpaieversionunsupported - wpa information element version is not supported, groupcipherinvalid - group cipher is invalid, pairwisecipherinvalid - pairwise cipher is invalid, akminvalid - akm is invalid" SYNTAX INTEGER { unknownfailure(1), invalidie(2), rsnieversionunsupported(3), wpaieversionunsupported(4), groupcipherinvalid(5), pairwisecipherinvalid(6), akminvalid(7) } -- 802.11e TEXTUAL-CONVENTION HpnicfDot11QosAcType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "802.11e defines four types of access category, including: acbk - for background access category, acbe - for besteffort access category, acvi - for voice access category, acvo - for video access category " SYNTAX INTEGER { acbk(1), acbe(2), acvi(3), acvo(4) } HpnicfDot11RadioElementIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents index of radio. For split architecture, It comprises two parts. The lowest 8 bits mean radio ID. The highest 8 bits are reserved. The highest 8 bits stand for AP ID. The meaning is shown as follows: 31 23 15 7 0 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + | reserved | AP ID | radio ID | + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + For FAT AP, the type represents ifIndex of radio. " SYNTAX Unsigned32 -- ***************************************************************************** -- * Major sections -- ***************************************************************************** HpnicfDot11WorkMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Work mode of device. In normal mode, the device will provide WLAN service. In monitor mode, the device will monitor the environment. In hybrid mode, the device will provide WLAN service while monitoring the environment." SYNTAX INTEGER { normal(1), monitor(2), hybrid(3) } HpnicfDot11CirMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The mode of committed information rate. 'static' means station will use the configured CIR separately. For example, if the CIR is 1Mbps, every station can enjoy 1Mbps. 'dynamic' means all stations will share the configured CIR in common." SYNTAX INTEGER { static(1), dynamic(2) } HpnicfDot11SaIntfDevType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of interference device." SYNTAX INTEGER { microwave(1), microwaveInverter(2), bluetooth(3), fixedFreqOthers(4), fixedFreqCordlessPhone(5), fixedFreqVideo(6), fixedFreqAudio(7), freqHopperOthers(8), freqHopperCordlessBase(9), freqHopperCordlessNetwork(10), freqHopperXbox(11), genericInterferer(12) } HpnicfDot11TruthValueCM ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a boolean value." SYNTAX INTEGER { dot11false(0), dot11true(1) } hpnicfDot11Common OBJECT IDENTIFIER ::= { hpnicfDot11 12 } hpnicfDot11ElementGroup OBJECT IDENTIFIER ::= { hpnicfDot11Common 1 } -- ***************************************************************************** -- * hpnicfDot11APElementTable Definition -- ***************************************************************************** hpnicfDot11APElementTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11APElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to represent fat AP and AP template on AC as one kind of AP element." ::= { hpnicfDot11ElementGroup 1 } hpnicfDot11APElementEntry OBJECT-TYPE SYNTAX HpnicfDot11APElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information for each AP element." INDEX { hpnicfDot11APElementIndex } ::= { hpnicfDot11APElementTable 1 } HpnicfDot11APElementEntry ::= SEQUENCE { hpnicfDot11APElementIndex Integer32, hpnicfDot11APElementTemplateName OCTET STRING, hpnicfDot11APElementSerialID OCTET STRING, hpnicfDot11APElementModelAlias OCTET STRING } hpnicfDot11APElementIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the index of AP element." ::= { hpnicfDot11APElementEntry 1 } hpnicfDot11APElementTemplateName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the template name of AP element." ::= { hpnicfDot11APElementEntry 2 } hpnicfDot11APElementSerialID OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the serial ID of AP element." ::= { hpnicfDot11APElementEntry 3 } hpnicfDot11APElementModelAlias OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the alias of AP element model name." ::= { hpnicfDot11APElementEntry 4 } -- ***************************************************************************** -- * End of hpnicfDot11APElementTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * hpnicfDot11RadioElementTable Definition -- ***************************************************************************** hpnicfDot11RadioElementTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfDot11RadioElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to represent the radio element of fat AP and AC." ::= { hpnicfDot11ElementGroup 2 } hpnicfDot11RadioElementEntry OBJECT-TYPE SYNTAX HpnicfDot11RadioElementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information for each radio element." INDEX { hpnicfDot11APElementIndex, hpnicfDot11RadioElementRadioNum } ::= { hpnicfDot11RadioElementTable 1 } HpnicfDot11RadioElementEntry ::= SEQUENCE { hpnicfDot11RadioElementRadioNum Unsigned32, hpnicfDot11RadioElementRadioPolicy OCTET STRING, hpnicfDot11RadioElementRadioIndex Unsigned32 } hpnicfDot11RadioElementRadioNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the number of the radio element." ::= { hpnicfDot11RadioElementEntry 1 } hpnicfDot11RadioElementRadioPolicy OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the radio policy of the radio element." ::= { hpnicfDot11RadioElementEntry 2 } hpnicfDot11RadioElementRadioIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the index of the radio element. On AC, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. On fat AP, the index stands for the interface index of radio interface." ::= { hpnicfDot11RadioElementEntry 3 } -- ***************************************************************************** -- * End of hpnicfDot11RadioElementTable Definition -- ***************************************************************************** END