-- ============================================================= -- Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P. -- -- Description: -- Reference: -- Version: V1.4 -- History: -- V1.0 2009-04-30 Initial Version by jinyi -- V1.1 2009-12-30 Added hpnicfAccessMediaChanged by jinyi -- V1.2 2011-07-22 Added hpnicfWirelessCardInterfaceIndex, -- hpnicfWirelessCardModemStatus in hpnicfWirelessCardTable. -- Added hpnicf3GCdma1xRttTable, hpnicf3GCdmaEvDoTable, hpnicf3GGsmInfoTable -- hpnicf3GCurrentService, hpnicf3GCurrentRssiBind, hpnicf3GImsiBind, -- hpnicf3GRssiStrongSignalTrap, hpnicf3GRssiMediumSignalTrap and -- hpnicf3GRssiWeakSignalTrap. -- Changed MAX-ACCESS of hpnicfWirelessCardIndex by songhao. -- V1.3 2012-08-02 Added hpnicfWirelessCardModemMode, hpnicfWirelessCardCurNetConn in -- hpnicfWirelessCardEntry. -- Added hpnicfSmsGroup and hpnicfWirelessCardOnlineTable under hpnicfWirelessCard. -- Added hpnicf3GGsmMcc, hpnicf3GGsmMnc in hpnicf3GGsmInfoEntry -- Added hpnicfLte under hpnicf3GModemObjects -- Added hpnicfSmsSrcNumberBind, hpnicfSmsTimeBind, hpnicfSmsEncodeBind, -- hpnicfSmsContentBind, hpnicfSmsTxNotifation, hpnicfSmsRxNotifation by songhao. -- V1.4 2013-08-13 Added hpnicfLteCurrentRssi,hpnicfLteRssiMediumThreshold and -- hpnicfLteRssiWeakThreshold in HpnicfLteInfoEntry. -- Added lte(5) in hpnicf3GCurrentService by zuowenzhong. -- ============================================================= HPN-ICF-3GMODEM-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex FROM IF-MIB hpnicfCommon FROM HPN-ICF-OID-MIB; hpnicf3GModem MODULE-IDENTITY LAST-UPDATED "200904301200Z" ORGANIZATION "" CONTACT-INFO "" DESCRIPTION "The information about the wireless card and the UIM (User Identification Module)." REVISION "200904301200Z" DESCRIPTION "Initial version of this MIB module." ::= { hpnicfCommon 98 } HpnicfUIMStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of the UIM." SYNTAX INTEGER { absent(1), -- the UIM is absent initial(2), -- the UIM is initial fault(3), -- something wrong in UIM unprotected(4), -- the UIM is not protected with PIN -- (Personal Identification Number) and can be -- used normally protected(5), -- the UIM is protected with PIN and can be -- used normally pinLocked(6), -- the UIM is locked, and need be unlocked with PIN pukLocked(7), -- the UIM is locked, and need be unlocked with PUK -- (PIN Unblocking Key) selfDestruct(8) -- the UIM is destruct by itself } HpnicfSmsEncodeType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The encode type of Sms (short message service)." SYNTAX INTEGER { ascii(1), ucs2(2) } hpnicf3GModemObjects OBJECT IDENTIFIER ::= { hpnicf3GModem 1 } hpnicfWirelessCard OBJECT IDENTIFIER ::= { hpnicf3GModemObjects 1 } hpnicfUIM OBJECT IDENTIFIER ::= { hpnicf3GModemObjects 2 } hpnicf3GCdma OBJECT IDENTIFIER ::= { hpnicf3GModemObjects 3 } hpnicf3GGsm OBJECT IDENTIFIER ::= { hpnicf3GModemObjects 4 } hpnicfLte OBJECT IDENTIFIER ::= { hpnicf3GModemObjects 5 } -- The wireless card table hpnicfWirelessCardTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfWirelessCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per wireless card." ::= { hpnicfWirelessCard 1 } hpnicfWirelessCardEntry OBJECT-TYPE SYNTAX HpnicfWirelessCardEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a particular wireless card." INDEX { hpnicfWirelessCardIndex } ::= { hpnicfWirelessCardTable 1 } HpnicfWirelessCardEntry ::= SEQUENCE { hpnicfWirelessCardIndex Integer32, hpnicfWirelessCardModelName SnmpAdminString, hpnicfWirelessCardMfgName SnmpAdminString, hpnicfWirelessCardDescription SnmpAdminString, hpnicfWirelessCardSerialNumber SnmpAdminString, hpnicfWirelessCardCMIIID SnmpAdminString, hpnicfWirelessCardHardwareVersion SnmpAdminString, hpnicfWirelessCardFirmwareVersion SnmpAdminString, hpnicfWirelessCardPRLVersion SnmpAdminString, hpnicfWirelessCardInterfaceIndex InterfaceIndex, hpnicfWirelessCardModemStatus INTEGER, hpnicfWirelessCardModemMode INTEGER, hpnicfWirelessCardCurNetConn INTEGER } hpnicfWirelessCardIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The index for this entry." ::= { hpnicfWirelessCardEntry 1 } hpnicfWirelessCardModelName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The model name of this card." ::= { hpnicfWirelessCardEntry 2 } hpnicfWirelessCardMfgName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the manufacturer of this card." ::= { hpnicfWirelessCardEntry 3 } hpnicfWirelessCardDescription OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The textual description of this card." ::= { hpnicfWirelessCardEntry 4 } hpnicfWirelessCardSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor-specific serial number string for this card." ::= { hpnicfWirelessCardEntry 5 } hpnicfWirelessCardCMIIID OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The card ID of CMII (Ministry of Information Industry of China)." ::= { hpnicfWirelessCardEntry 6 } hpnicfWirelessCardHardwareVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor-specific hardware version string for this card." ::= { hpnicfWirelessCardEntry 7 } hpnicfWirelessCardFirmwareVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor-specific firmware version string for this card." ::= { hpnicfWirelessCardEntry 8 } hpnicfWirelessCardPRLVersion OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The preferred roaming list version for this card." ::= { hpnicfWirelessCardEntry 9 } hpnicfWirelessCardInterfaceIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The interface index in IF-MIB of this card." ::= { hpnicfWirelessCardEntry 10 } hpnicfWirelessCardModemStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), onLine(2), offLine(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of modem." ::= { hpnicfWirelessCardEntry 11 } hpnicfWirelessCardModemMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), tdscdma(2), wcdma(3), cdma(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of the 3G-Modem." ::= { hpnicfWirelessCardEntry 12 } hpnicfWirelessCardCurNetConn OBJECT-TYPE SYNTAX INTEGER { unknown(1), noService(2), gsm(3), gprs(4), edge(5), hsdpa(6), hsupa(7), hsupaAndhsdpa(8), hspaPlus(9), umts(10), dchspaPlus(11), lte(12), onexrtt(13), evdo(14), onexrttAndevdo(15), tdscdma(16) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current network connection." ::= { hpnicfWirelessCardEntry 13 } -- SMS group hpnicfSmsGroup OBJECT IDENTIFIER ::= { hpnicfWirelessCard 2 } -- SMS scalar objects hpnicfSmsScalarObjects OBJECT IDENTIFIER ::= { hpnicfSmsGroup 1 } hpnicfSmsRxNotifSwitch OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The switch of notification when a short message received." ::= { hpnicfSmsScalarObjects 1 } -- SMS operation table hpnicfSmsOperationTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfSmsOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per short message." ::= { hpnicfSmsGroup 2 } hpnicfSmsOperationEntry OBJECT-TYPE SYNTAX HpnicfSmsOperationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The infomation about the short message." INDEX { hpnicfWirelessCardIndex } ::= { hpnicfSmsOperationTable 1 } HpnicfSmsOperationEntry ::= SEQUENCE { hpnicfSmsDestNumber SnmpAdminString, hpnicfSmsEncode HpnicfSmsEncodeType, hpnicfSmsContent OCTET STRING, hpnicfSmsSendStatus INTEGER } hpnicfSmsDestNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination number of the short message." ::= { hpnicfSmsOperationEntry 1 } hpnicfSmsEncode OBJECT-TYPE SYNTAX HpnicfSmsEncodeType MAX-ACCESS read-write STATUS current DESCRIPTION "The encoded type of the short message." DEFVAL { 1 } ::= { hpnicfSmsOperationEntry 2 } hpnicfSmsContent OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Content of the short message." ::= { hpnicfSmsOperationEntry 3 } hpnicfSmsSendStatus OBJECT-TYPE SYNTAX INTEGER { set2Send(1), ready2Send(2), sending(3), sentAlready(4), telnumberInvalid(5), paramInvalid(6), contentTooLong(7), codeError(8), unknown(9), busy(10), notPresent(11), notSupport(12), initializing(13), noCenterNum(14), noSim(15), simNotReady(16), sendAtFailed(17), sendDisable(18) } MAX-ACCESS read-write STATUS current DESCRIPTION "Status of the short message sent." ::= { hpnicfSmsOperationEntry 4 } -- Wireless card online table hpnicfWirelessCardOnlineTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfWirelessCardOnlineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per wireless card." ::= { hpnicfWirelessCard 3 } hpnicfWirelessCardOnlineEntry OBJECT-TYPE SYNTAX HpnicfWirelessCardOnlineEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about online time of a wireless card." INDEX { hpnicfWirelessCardIndex, hpnicfWirelessCardOnlineTime } ::= { hpnicfWirelessCardOnlineTable 1 } HpnicfWirelessCardOnlineEntry ::= SEQUENCE { hpnicfWirelessCardOnlineTime Unsigned32, hpnicfWirelessCardOnlineType INTEGER } hpnicfWirelessCardOnlineTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this entry." ::= { hpnicfWirelessCardOnlineEntry 1 } hpnicfWirelessCardOnlineType OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The online type of this wireless card." ::= { hpnicfWirelessCardOnlineEntry 2 } -- The UIM information table hpnicfUIMInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfUIMInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one row per UIM." ::= { hpnicfUIM 1 } hpnicfUIMInfoEntry OBJECT-TYPE SYNTAX HpnicfUIMInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information about the UIM." INDEX { hpnicfWirelessCardIndex, hpnicfUIMIndex } ::= { hpnicfUIMInfoTable 1 } HpnicfUIMInfoEntry ::= SEQUENCE { hpnicfUIMIndex Integer32, hpnicfUIMStatus HpnicfUIMStatusType, hpnicfUIMImsi SnmpAdminString, hpnicfUIMPin SnmpAdminString, hpnicfUIMVoltage Unsigned32, hpnicfUIMProvider SnmpAdminString, hpnicfUIMSignal Integer32, hpnicfUIMTryPinPukTimes Unsigned32, hpnicfUIMOldPin SnmpAdminString } hpnicfUIMIndex OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index for this entry." ::= { hpnicfUIMInfoEntry 1 } hpnicfUIMStatus OBJECT-TYPE SYNTAX HpnicfUIMStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The status about this UIM." ::= { hpnicfUIMInfoEntry 2 } hpnicfUIMImsi OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The IMSI (International Mobile Subscriber Identification Number) about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string." ::= { hpnicfUIMInfoEntry 3 } hpnicfUIMPin OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..9)) MAX-ACCESS read-only STATUS current DESCRIPTION "The PIN about this UIM. If this information is unknown to the agent, then this object will be returned a zero-length string." ::= { hpnicfUIMInfoEntry 4 } hpnicfUIMVoltage OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) UNITS "milli-volt" MAX-ACCESS read-only STATUS current DESCRIPTION "The voltage about this UIM. If this information is unknown to the agent, then this object will be returned 4294967295." ::= { hpnicfUIMInfoEntry 5 } hpnicfUIMProvider OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The provider of mobile network. If this information is unknown to the agent, then this object will be returned a zero-length string." ::= { hpnicfUIMInfoEntry 6 } hpnicfUIMSignal OBJECT-TYPE SYNTAX Integer32(0..31 | 99) MAX-ACCESS read-only STATUS current DESCRIPTION "The intensity of the signal about this UIM. A value of '99' means no signal." ::= { hpnicfUIMInfoEntry 7 } hpnicfUIMTryPinPukTimes OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of remaining times for unlocking PIN or PUK. The value is associated the same instance of hpnicfUIMStatus. If this information is unknown to the agent, then this object will be returned 4294967295." ::= { hpnicfUIMInfoEntry 8 } hpnicfUIMOldPin OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..9)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The old PIN for this UIM." ::= { hpnicfUIMInfoEntry 9 } -- The CDMA information table of 1xRTT hpnicf3GCdma1xRttTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpnicf3GCdma1xRttEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CDMA 1xRTT table." ::= { hpnicf3GCdma 1 } hpnicf3GCdma1xRttEntry OBJECT-TYPE SYNTAX Hpnicf3GCdma1xRttEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of hpnicf3GCdma1xRttTable." INDEX { hpnicfWirelessCardIndex } ::= { hpnicf3GCdma1xRttTable 1 } Hpnicf3GCdma1xRttEntry ::= SEQUENCE { hpnicf3GCdma1xRttCurrentRssi Integer32, hpnicf3GCdma1xRttRssiMediumThreshold Integer32, hpnicf3GCdma1xRttRssiWeakThreshold Integer32, hpnicf3GCdma1xRttCurServiceStatus INTEGER, hpnicf3GCdma1xRttCurRoamingStatus INTEGER } hpnicf3GCdma1xRttCurrentRssi OBJECT-TYPE SYNTAX Integer32 (-2147483648 | -150..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The Received Signal Strength Indicator(RSSI) of CDMA 1xRTT." ::= { hpnicf3GCdma1xRttEntry 1 } hpnicf3GCdma1xRttRssiMediumThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The medium signal threshold of CMDA 1xRTT RSSI. The absolute value of hpnicf3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdma1xRttRssiWeakThreshold (|hpnicf3GCdma1xRttRssiMediumThreshold| <= |hpnicf3GCdma1xRttRssiWeakThreshold|)." DEFVAL { 0 } ::= { hpnicf3GCdma1xRttEntry 2 } hpnicf3GCdma1xRttRssiWeakThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The weak signal threshold of CMDA 1xRTT RSSI. The absolute value of hpnicf3GCdma1xRttRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdma1xRttRssiWeakThreshold (|hpnicf3GCdma1xRttRssiMediumThreshold| <= |hpnicf3GCdma1xRttRssiWeakThreshold|)." DEFVAL { -150 } ::= { hpnicf3GCdma1xRttEntry 3 } hpnicf3GCdma1xRttCurServiceStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), emergency(3), lowPower(4), noService(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of service." ::= { hpnicf3GCdma1xRttEntry 4 } hpnicf3GCdma1xRttCurRoamingStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), roaming(2), home(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of roaming." ::= { hpnicf3GCdma1xRttEntry 5 } -- The CDMA information table of EvDo hpnicf3GCdmaEvDoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpnicf3GCdmaEvDoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "CDMA EvDo table." ::= { hpnicf3GCdma 2 } hpnicf3GCdmaEvDoEntry OBJECT-TYPE SYNTAX Hpnicf3GCdmaEvDoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of hpnicf3GCdmaEvDoTable." INDEX { hpnicfWirelessCardIndex } ::= { hpnicf3GCdmaEvDoTable 1 } Hpnicf3GCdmaEvDoEntry ::= SEQUENCE { hpnicf3GCdmaEvDoCurrentRssi Integer32, hpnicf3GCdmaEvDoRssiMediumThreshold Integer32, hpnicf3GCdmaEvDoRssiWeakThreshold Integer32, hpnicf3GCdmaEvDoCurServiceStatus INTEGER, hpnicf3GCdmaEvDoCurRoamingStatus INTEGER } hpnicf3GCdmaEvDoCurrentRssi OBJECT-TYPE SYNTAX Integer32 (-2147483648 | -150..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The Received Signal Strength Indicator(RSSI) of CDMA EvDo." ::= { hpnicf3GCdmaEvDoEntry 1 } hpnicf3GCdmaEvDoRssiMediumThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The medium signal threshold of CMDA EvDo RSSI. The absolute value of hpnicf3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdmaEvDoRssiWeakThreshold (|hpnicf3GCdmaEvDoRssiMediumThreshold| <= |hpnicf3GCdmaEvDoRssiWeakThreshold|)." DEFVAL { 0 } ::= { hpnicf3GCdmaEvDoEntry 2 } hpnicf3GCdmaEvDoRssiWeakThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The weak signal threshold of CMDA EvDo RSSI. The absolute value of hpnicf3GCdmaEvDoRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GCdmaEvDoRssiWeakThreshold (|hpnicf3GCdmaEvDoRssiMediumThreshold| <= |hpnicf3GCdmaEvDoRssiWeakThreshold|)." DEFVAL { -150 } ::= { hpnicf3GCdmaEvDoEntry 3 } hpnicf3GCdmaEvDoCurServiceStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), emergency(3), lowPower(4), noService(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of service." ::= { hpnicf3GCdmaEvDoEntry 4 } hpnicf3GCdmaEvDoCurRoamingStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), roaming(2), home(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of roaming." ::= { hpnicf3GCdmaEvDoEntry 5 } -- The GSM information table hpnicf3GGsmInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hpnicf3GGsmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "GSM information table." ::= { hpnicf3GGsm 1 } hpnicf3GGsmInfoEntry OBJECT-TYPE SYNTAX Hpnicf3GGsmInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of hpnicf3GGsmInfoTable." INDEX { hpnicfWirelessCardIndex } ::= { hpnicf3GGsmInfoTable 1 } Hpnicf3GGsmInfoEntry ::= SEQUENCE { hpnicf3GGsmCurrentRssi Integer32, hpnicf3GGsmRssiMediumThreshold Integer32, hpnicf3GGsmRssiWeakThreshold Integer32, hpnicf3GGsmImsi SnmpAdminString, hpnicf3GGsmImei SnmpAdminString, hpnicf3GGsmApn SnmpAdminString, hpnicf3GGsmPacketSessionStatus INTEGER, hpnicf3GGsmNetworkSelectionMode INTEGER, hpnicf3GGsmMobileNetworkName SnmpAdminString, hpnicf3GGsmLac SnmpAdminString, hpnicf3GGsmCellId SnmpAdminString, hpnicf3GGsmSimStatus INTEGER, hpnicf3GGsmCurServiceStatus INTEGER, hpnicf3GGsmCurRoamingStatus INTEGER, hpnicf3GGsmMcc SnmpAdminString, hpnicf3GGsmMnc SnmpAdminString } hpnicf3GGsmCurrentRssi OBJECT-TYPE SYNTAX Integer32 (-2147483648 | -150..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The Received Signal Strength Indicator(RSSI) of GSM." ::= { hpnicf3GGsmInfoEntry 1 } hpnicf3GGsmRssiMediumThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The medium signal threshold of GSM RSSI. The absolute value of hpnicf3GGsmRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GGsmRssiWeakThreshold (|hpnicf3GGsmRssiMediumThreshold| <= |hpnicf3GGsmRssiWeakThreshold|)." DEFVAL { 0 } ::= { hpnicf3GGsmInfoEntry 2 } hpnicf3GGsmRssiWeakThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The weak signal threshold of GSM RSSI. The absolute value of hpnicf3GGsmRssiMediumThreshold should be less than or equal to the absolute value of hpnicf3GGsmRssiWeakThreshold (|hpnicf3GGsmRssiMediumThreshold| <= |hpnicf3GGsmRssiWeakThreshold|)." DEFVAL { -150 } ::= { hpnicf3GGsmInfoEntry 3 } hpnicf3GGsmImsi OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The International Mobile Subscriber Identity(IMSI) of GSM." ::= { hpnicf3GGsmInfoEntry 4 } hpnicf3GGsmImei OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The International Mobile Equipment Identity(IMEI) of GSM." ::= { hpnicf3GGsmInfoEntry 5 } hpnicf3GGsmApn OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "The Access Point Name(APN) of GSM." ::= { hpnicf3GGsmInfoEntry 6 } hpnicf3GGsmPacketSessionStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), active(2), inactive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The packet session status of GSM." ::= { hpnicf3GGsmInfoEntry 7 } hpnicf3GGsmNetworkSelectionMode OBJECT-TYPE SYNTAX INTEGER { unknown(1), automatic(2), manual(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The network selection mode of GSM." ::= { hpnicf3GGsmInfoEntry 8 } hpnicf3GGsmMobileNetworkName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The mobile network name of GSM." ::= { hpnicf3GGsmInfoEntry 9 } hpnicf3GGsmLac OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Location Area Code(LAC) of GSM." ::= { hpnicf3GGsmInfoEntry 10 } hpnicf3GGsmCellId OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The ID of cell." ::= { hpnicf3GGsmInfoEntry 11 } hpnicf3GGsmSimStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), ok(2), notInsert(3), networkReject(4), blocked(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of SIM." ::= { hpnicf3GGsmInfoEntry 12 } hpnicf3GGsmCurServiceStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), available(2), emergency(3), lowPower(4), noService(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of service." ::= { hpnicf3GGsmInfoEntry 13 } hpnicf3GGsmCurRoamingStatus OBJECT-TYPE SYNTAX INTEGER { unknown(1), roaming(2), home(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of roaming." ::= { hpnicf3GGsmInfoEntry 14 } hpnicf3GGsmMcc OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Mobile Country Code(MCC) of GSM." ::= { hpnicf3GGsmInfoEntry 15 } hpnicf3GGsmMnc OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Mobile Network Code of GSM." ::= { hpnicf3GGsmInfoEntry 16 } -- The LTE infomation table hpnicfLteInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF HpnicfLteInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The quality of signal table." ::= { hpnicfLte 1 } hpnicfLteInfoEntry OBJECT-TYPE SYNTAX HpnicfLteInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The quality about the signal." INDEX { hpnicfWirelessCardIndex } ::= { hpnicfLteInfoTable 1 } HpnicfLteInfoEntry ::= SEQUENCE { hpnicfLteCurrentRsrp Integer32, hpnicfLteCurrentRsrq Integer32, hpnicfLteCurrentSinr Integer32, hpnicfLteTxPower Integer32, hpnicfLteCurrentRssi Integer32, hpnicfLteRssiMediumThreshold Integer32, hpnicfLteRssiWeakThreshold Integer32 } hpnicfLteCurrentRsrp OBJECT-TYPE SYNTAX Integer32 UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "Reference signal receiving power." ::= { hpnicfLteInfoEntry 1 } hpnicfLteCurrentRsrq OBJECT-TYPE SYNTAX Integer32 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Reference signal receiving quality." ::= { hpnicfLteInfoEntry 2 } hpnicfLteCurrentSinr OBJECT-TYPE SYNTAX Integer32 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Signal to interface plus noise ratio." ::= { hpnicfLteInfoEntry 3 } hpnicfLteTxPower OBJECT-TYPE SYNTAX Integer32 UNITS "dB" MAX-ACCESS read-only STATUS current DESCRIPTION "Transmit power, 0x8000 means invalid." ::= { hpnicfLteInfoEntry 4 } hpnicfLteCurrentRssi OBJECT-TYPE SYNTAX Integer32 (-2147483648 | -150..0) UNITS "dBm" MAX-ACCESS read-only STATUS current DESCRIPTION "The Received Signal Strength Indicator(RSSI) of LTE." ::= { hpnicfLteInfoEntry 5 } hpnicfLteRssiMediumThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The medium signal threshold of LTE RSSI. The absolute value of hpnicfLteRssiMediumThreshold should be less than or equal to the absolute value of hpnicfLteRssiWeakThreshold (|hpnicfLteRssiMediumThreshold| <= |hpnicfLteRssiWeakThreshold|)." DEFVAL { 0 } ::= { hpnicfLteInfoEntry 6 } hpnicfLteRssiWeakThreshold OBJECT-TYPE SYNTAX Integer32 (-150..0) UNITS "dBm" MAX-ACCESS read-write STATUS current DESCRIPTION "The weak signal threshold of LTE RSSI. The absolute value of hpnicfLteRssiMediumThreshold should be less than or equal to the absolute value of hpnicfLteRssiWeakThreshold (|hpnicfLteRssiMediumThreshold| <= |hpnicfLteRssiWeakThreshold|)." DEFVAL { -150 } ::= { hpnicfLteInfoEntry 7 } -- MIB trap definitions hpnicf3GModemTrap OBJECT IDENTIFIER ::= { hpnicf3GModem 2 } hpnicf3GModemTraps OBJECT IDENTIFIER ::= { hpnicf3GModem 3 } hpnicf3GModemTrapPrefix OBJECT IDENTIFIER ::= { hpnicf3GModemTraps 0 } hpnicfDevSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The serial number of the current device." ::= { hpnicf3GModemTrap 1 } hpnicfDeviceOUI OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The OUI (Organizational Unique Identifier) of the current device." ::= { hpnicf3GModemTrap 2 } hpnicfAccessMedia OBJECT-TYPE SYNTAX INTEGER { unknown(1), air(2), cable(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current access media." ::= { hpnicf3GModemTrap 3 } hpnicf3GCurrentService OBJECT-TYPE SYNTAX INTEGER { unknown(1), oneXRtt(2), evDo(3), gsm(4), lte(5) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current service type which binded in the notifications." ::= { hpnicf3GModemTrap 4 } hpnicf3GCurrentRssiBind OBJECT-TYPE SYNTAX Integer32 (-2147483648 | -150..0) UNITS "dBm" MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current RSSI which binded in the notifications." ::= { hpnicf3GModemTrap 5 } hpnicf3GImsiBind OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IMSI which binded in the notifications." ::= { hpnicf3GModemTrap 6 } hpnicfSmsSrcNumberBind OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..20)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The source number which binded in the notifications." ::= { hpnicf3GModemTrap 7 } hpnicfSmsTimeBind OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(1..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The sending time which binded in the notifications." ::= { hpnicf3GModemTrap 8 } hpnicfSmsEncodeBind OBJECT-TYPE SYNTAX HpnicfSmsEncodeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The encoded type which binded in the notifications." ::= { hpnicf3GModemTrap 9 } hpnicfSmsContentBind OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..512)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The content of short message which binded in the notifications." ::= { hpnicf3GModemTrap 10 } hpnicfWirelessCardInserted NOTIFICATION-TYPE OBJECTS { hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicfUIMImsi } STATUS current DESCRIPTION "A hpnicfWirelessCardInserted notification is generated when a wireless card is inserted." ::= { hpnicf3GModemTrapPrefix 1 } hpnicfWirelessCardPulledOut NOTIFICATION-TYPE OBJECTS { hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicfUIMImsi } STATUS current DESCRIPTION "A hpnicfWirelessCardPulledOut notification is generated when a wireless card is pulled out." ::= { hpnicf3GModemTrapPrefix 2 } hpnicfUIMPinInvalid NOTIFICATION-TYPE OBJECTS { hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicfUIMImsi } STATUS current DESCRIPTION "A hpnicfUIMPinInvalid notification is generated when UIM PIN is invalid." ::= { hpnicf3GModemTrapPrefix 3 } hpnicfUIMPinChanged NOTIFICATION-TYPE OBJECTS { hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicfUIMImsi, hpnicfUIMOldPin, hpnicfUIMPin } STATUS current DESCRIPTION "A hpnicfUIMPinInvalid notification is generated when UIM PIN is changed." ::= { hpnicf3GModemTrapPrefix 4 } hpnicfAccessMediaChanged NOTIFICATION-TYPE OBJECTS { hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicfUIMImsi, hpnicfAccessMedia } STATUS current DESCRIPTION "A hpnicfAccessMediaChanged notification is generated when access media is changed." ::= { hpnicf3GModemTrapPrefix 5 } hpnicf3GRssiStrongSignalTrap NOTIFICATION-TYPE OBJECTS { hpnicfWirelessCardIndex, hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicf3GCurrentService, hpnicf3GCurrentRssiBind, hpnicf3GImsiBind } STATUS current DESCRIPTION "A hpnicf3GRssiStrongSignalTrap notification is generated when current RSSI exceeds the medium signal threshold." ::= { hpnicf3GModemTrapPrefix 6 } hpnicf3GRssiMediumSignalTrap NOTIFICATION-TYPE OBJECTS { hpnicfWirelessCardIndex, hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicf3GCurrentService, hpnicf3GCurrentRssiBind, hpnicf3GImsiBind } STATUS current DESCRIPTION "A hpnicf3GRssiMediumSignalTrap notification is generated when the current RSSI falls or rises to a value between the medium and weak signal thresholds." ::= { hpnicf3GModemTrapPrefix 7 } hpnicf3GRssiWeakSignalTrap NOTIFICATION-TYPE OBJECTS { hpnicfWirelessCardIndex, hpnicfDeviceOUI, hpnicfDevSerialNumber, hpnicfWirelessCardSerialNumber, hpnicf3GCurrentService, hpnicf3GCurrentRssiBind, hpnicf3GImsiBind } STATUS current DESCRIPTION "A hpnicf3GRssiWeakSignalTrap notification is generated when current RSSI falls below the weak signal threshold." ::= { hpnicf3GModemTrapPrefix 8 } hpnicfSmsTxNotification NOTIFICATION-TYPE OBJECTS { hpnicfWirelessCardIndex, hpnicfSmsSendStatus } STATUS current DESCRIPTION "A hpnicfSmsTxNotification notification is generated when a short message is sent." ::= { hpnicf3GModemTrapPrefix 9 } hpnicfSmsRxNotification NOTIFICATION-TYPE OBJECTS { hpnicfWirelessCardIndex, hpnicfSmsSrcNumberBind, hpnicfSmsTimeBind, hpnicfSmsEncodeBind, hpnicfSmsContentBind } STATUS current DESCRIPTION "A hpnicfSmsRxNotification notification is generated when a short message is recieved." ::= { hpnicf3GModemTrapPrefix 10 } END