HPICF-TR069-MIB DEFINITIONS ::= BEGIN -- **************************************************************************** -- MIB for the HP ICF implementation of Broadband Forum Specification -- TR-069 - CPE WAN Management Protocol (CWMP) -- **************************************************************************** IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF hpSwitch FROM HP-ICF-OID; hpicfTR069MIB MODULE-IDENTITY LAST-UPDATED "201403030000Z" -- March 03, 2014 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB defines HP proprietary objects used to configure the TR-069 feature." REVISION "201403030000Z" -- March 03, 2014 DESCRIPTION "Initial version" ::= { hpSwitch 98 } -- **************************************************************************** -- This MIB module contains the following groups -- **************************************************************************** hpicfTR069Notifications OBJECT IDENTIFIER ::= { hpicfTR069MIB 0 } hpicfTR069Objects OBJECT IDENTIFIER ::= { hpicfTR069MIB 1 } hpicfTR069Conformance OBJECT IDENTIFIER ::= { hpicfTR069MIB 2 } -- **************************************************************************** -- Individual object definitions for TR-069 -- **************************************************************************** hpicfTR069EnableCWMP OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enable TR-069 on the device." ::= { hpicfTR069Objects 1 } hpicfTR069CWMPDeviceType OBJECT-TYPE SYNTAX INTEGER { device (1), gateway (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The working mode of the device. By default, the device operates in gateway mode. CWMP should be disabled before changing modes." ::= { hpicfTR069Objects 2 } hpicfTR069AcsUrl OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URL used by TR-069 to connect to the ACS. The value should be a valid HTTP or HTTPS URL." ::= { hpicfTR069Objects 3 } hpicfTR069AcsUrlOrigin OBJECT-TYPE SYNTAX INTEGER { none (1), config (2), dhcp (3), acs (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the ACS URL. none - no ACS URL set config - from the device configuration file dhcp - from a DHCP server response acs - from the ACS itself" ::= { hpicfTR069Objects 4 } hpicfTR069AcsProxyUrl OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The URL used by TR-069 to connect to a proxy server in order to reach the ACS. The value should be a valid HTTP or HTTPS URL." ::= { hpicfTR069Objects 5 } hpicfTR069AcsUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The username for HTTP authentication with the ACS." ::= { hpicfTR069Objects 6 } hpicfTR069AcsPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The plaintext password for HTTP authentication with the ACS. This object always returns an empty string when read." ::= { hpicfTR069Objects 7 } hpicfTR069AcsPasswordEncrypted OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..384)) MAX-ACCESS read-write STATUS current DESCRIPTION "An encrypted form of the ACS password. The value should be an encrypted password previously read from a compatible HP Networking device. This object can only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than 'none' and cannot be set at the same time as hpicfTR069AcsPassword." ::= { hpicfTR069Objects 8 } hpicfTR069AcsConnectRetryInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The ACS connection retry interval." ::= { hpicfTR069Objects 9 } hpicfTR069CpeUsername OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The username for HTTP authentication with the TR-069 client." ::= { hpicfTR069Objects 10 } hpicfTR069CpePassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-write STATUS current DESCRIPTION "The plaintext password for HTTP authentication with the TR-069 client. This object always returns an empty string when read." ::= { hpicfTR069Objects 11 } hpicfTR069CpePasswordEncrypted OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..384)) MAX-ACCESS read-write STATUS current DESCRIPTION "An encrypted form of the client password. The value should be an encrypted password previously read from a compatible HP Networking device. This object can only be read or written when hpSwitchAuthenticationEncryptCredentialsMethod is set to a value other than 'none' and cannot be set at the same time as hpicfTR069CpePassword." ::= { hpicfTR069Objects 12 } hpicfTR069CpeWaitTimeout OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The close-wait timeout of the ACS connection." ::= { hpicfTR069Objects 13 } hpicfTR069PeriodicInformEnable OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The periodic inform message setting specified by the ACS." ::= { hpicfTR069Objects 14 } hpicfTR069PeriodicInformInterval OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The periodic inform interval in seconds specified by the ACS." ::= { hpicfTR069Objects 15 } hpicfTR069PeriodicInformTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time to send inform messages specified by the ACS." ::= { hpicfTR069Objects 16 } -- **************************************************************************** -- MIB Conformance Information / Details -- **************************************************************************** hpicfTR069MIBCompliances OBJECT IDENTIFIER ::= { hpicfTR069Conformance 1 } hpicfTR069MIBGroups OBJECT IDENTIFIER ::= { hpicfTR069Conformance 2 } -- **************************************************************************** -- Compliance Statements -- **************************************************************************** hpicfTR069MIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP switches implementing the HPICF-TR069 MIB." MODULE MANDATORY-GROUPS { hpicfTR069Group } ::= { hpicfTR069MIBCompliances 1 } -- **************************************************************************** -- Conformance Groups -- **************************************************************************** hpicfTR069Group OBJECT-GROUP OBJECTS { hpicfTR069EnableCWMP, hpicfTR069CWMPDeviceType, hpicfTR069AcsUrl, hpicfTR069AcsUrlOrigin, hpicfTR069AcsProxyUrl, hpicfTR069AcsUsername, hpicfTR069AcsPassword, hpicfTR069AcsPasswordEncrypted, hpicfTR069AcsConnectRetryInterval, hpicfTR069CpeUsername, hpicfTR069CpePassword, hpicfTR069CpePasswordEncrypted, hpicfTR069CpeWaitTimeout, hpicfTR069PeriodicInformEnable, hpicfTR069PeriodicInformInterval, hpicfTR069PeriodicInformTime } STATUS current DESCRIPTION "A collection of objects to support the TR-069 feature." ::= { hpicfTR069MIBGroups 1 } END