HP-ICF-TC DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY FROM SNMPv2-SMI TEXTUAL-CONVENTION FROM SNMPv2-TC hpicfAdmin FROM HP-ICF-OID; hpicfTextualConventions MODULE-IDENTITY LAST-UPDATED "201010120800Z" -- October 12, 2010 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This module contains common textual convention definitions used by various HP ICF MIB modules." REVISION "201010120800Z" -- October 12, 2010 DESCRIPTION "Added VidList type" REVISION "200902101800Z" -- February 10, 2009 DESCRIPTION "Added 10GbE-K for 802.3ap (clauses 69-74)" REVISION "200808190905Z" -- August 19, 2008 DESCRIPTION "Added XFP-SFP+ DAC types for HpSwitchPortType." REVISION "200802041536Z" -- February 04, 2008 DESCRIPTION "Added multiple transceiver types." REVISION "200402182305Z" -- February 18, 2004 DESCRIPTION "Added gigabitEthernetESP and tenGigabitEthernetCX type for HpSwitchPortType." REVISION "200011030717Z" -- November 3, 2000 DESCRIPTION "Initial revision." ::= { hpicfAdmin 4 } ConfigStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to indicate the configuration status for a group of objects. 'active' means that the values of the related objects are currently in use by the device. 'notInService' indicates that the objects have been reconfigured in such a way that the values cannot take effect until after the next reboot of the device. 'notReady' indicates that the objects are not consistent with each other." SYNTAX INTEGER { active(1), notInService(2), notReady(3) } HpSwitchPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Used to indicate the type of port." SYNTAX INTEGER { other(1), none(2), unknown(3), ethernetCsmacd(6), iso88023Csmacd(7), fddi(15), atm(37), propMultiplexor(54), ieee80212(55), fastEther(62), fastEtherFX(69), fastEtherFX-sfp(70), tenGSFP-SR (112), tenGSFP-LR (113), tenGSFP-ER (114), tenGSFP-LRM (115), tenGSFP-LX4 (116), gigabitEthernetSX (117), gigabitEthernetLX (118), gigabitEthernetT (119), gigabitEthernetStk (120), gigabitEthernetLH (121), tenGbE-CX4 (122), gigabitEthernetESP (123), tenGbE-SR (124), tenGbE-ER (125), tenGbE-LR (126), gigabitEthernetT-sfp (127), fastEtherGEN (128), gigabitEthernetGEN (129), tenGbE-GEN (130), fastEtherBX-D (131), fastEtherBX-U (132), gigabitEthernetBX-D (133), gigabitEthernetBX-U (134), tenGbE-LRM (135), sFP-PLUS-SR (136), sFP-PLUS-LR (137), sFP-PLUS-LRM (138), sFP-PLUS-DAC (139), sFP-PLUS-DA1 (140), sFP-PLUS-DA2 (141), sFP-PLUS-DA3 (142), sFP-PLUS-DA5 (143), sFP-PLUS-DA7 (144), sFP-PLUS-DA10 (145), sFP-PLUS-DA15 (146), sFP-PLUS-DA20 (147), tenGbE-T (148), tenGbE-TSH (149), tenGbE-TLH (150), tenGbE-STK (151), xFP-SFP-PLUS-DAC (152), xFP-SFP-PLUS-DA1 (153), xFP-SFP-PLUS-DA3 (154), xFP-SFP-PLUS-DA5 (155), xFP-SFP-PLUS-DA7 (156), xFP-SFP-PLUS-DA10 (157), tenGbE-K (158), sFP-PLUS-ER (160), sFP-CWDM1470 (161), sFP-CWDM1490 (162), sFP-CWDM1510 (163), sFP-CWDM1530 (164), sFP-CWDM1550 (165), sFP-CWDM1570 (166), sFP-CWDM1590 (167), sFP-CWDM1610 (168) } VidList ::= TEXTUAL-CONVENTION DISPLAY-HINT "512x" STATUS current DESCRIPTION "Each octet within this value specifies a set of eight VlanIndex (VID), with the first octet specifying VIDs 1 through 8, the second octet specifying VIDs 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered VID, and the least significant bit represents the highest numbered VID. Thus, each VID is represented by a single bit within the value of this object. If that bit has a value of 1 then that VID is included in the set of VIDs; the VID is not included if its bit has a value of 0. This list represents the entire range of VlanIndex values defined in the scope of IEEE 802.1Q." SYNTAX OCTET STRING (SIZE (512)) END