HP-ICF-SRCIP-MIB DEFINITIONS ::= BEGIN IMPORTS hpicfCommon FROM HP-ICF-OID InetAddress, InetAddressType FROM INET-ADDRESS-MIB InterfaceIndexOrZero FROM IF-MIB OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF; -- ********************************************************************** -- Module information -- ********************************************************************** -- 1.3.6.1.4.1.11.2.14.11.1.13 hpicfSrcIpMIB MODULE-IDENTITY LAST-UPDATED "201107210000Z" -- July 21, 2011 at 00:00 GMT ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module contains the definitions of HP proprietary Managed Objects used for managing HP Routing switches with implemented source IP address administrative control." REVISION "201107210000Z" -- July 21, 2011 at 00:00 GMT DESCRIPTION "Added 'sflow' to 'hpicfSrcIpProtocolIndex' values." REVISION "200904300000Z" -- April 30, 2009 at 00:00 GMT DESCRIPTION "Added 'telnet', 'tftp', 'sntp' to 'hpicfSrcIpProtocolIndex' values." REVISION "200810100000Z" -- October 10, 2008 at 00:00 GMT DESCRIPTION "Initial version." ::= { hpicfCommon 13 } -- ********************************************************************** -- Node definitions -- ********************************************************************** -- 1.3.6.1.4.1.11.2.14.11.1.13.1 hpicfSrcIpConfig OBJECT IDENTIFIER ::= { hpicfSrcIpMIB 1 } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1 hpicfSrcIpAddrPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfSrcIpAddrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of entries used to configure the policy for selecting source IP address for different application protocols while transmitting the protocol specific IP packets. When the entry is configured the outgoing IP packets generated by the corresponding application protocol will have the source IP address field modified based on the configured policy option." ::= { hpicfSrcIpConfig 1 } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1 hpicfSrcIpAddrPolicyEntry OBJECT-TYPE SYNTAX HpicfSrcIpAddrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the 'hpicfSrcIpAddrPolicyTable' containing information about a source IP address selection policy." INDEX { hpicfSrcIpAddressType, hpicfSrcIpProtocolIndex } ::= { hpicfSrcIpAddrPolicyTable 1 } HpicfSrcIpAddrPolicyEntry ::= SEQUENCE { hpicfSrcIpAddressType InetAddressType, hpicfSrcIpProtocolIndex INTEGER, hpicfSrcIpAddrPolicy INTEGER, hpicfSrcIpAddrIfIndex InterfaceIndexOrZero, hpicfSrcIpAddress InetAddress } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.1 hpicfSrcIpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Type of IP address. The only values expected are ipv4 or ipv6." ::= { hpicfSrcIpAddrPolicyEntry 1 } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.2 hpicfSrcIpProtocolIndex OBJECT-TYPE SYNTAX INTEGER { tacacs(1), radius(2), syslog(3), telnet(4), tftp(5), sntp(6), sflow(7) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The application protocol index value which uniquely identifies a row in the 'hpicfSrcIpAddrPolicyTable'." ::= { hpicfSrcIpAddrPolicyEntry 2 } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.3 hpicfSrcIpAddrPolicy OBJECT-TYPE SYNTAX INTEGER { outgoingInterface(1), configuredIpAddr(2), configuredInterface(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The policy for selecting the source IP address. outgoingInterface - the IP address of outgoing interface should be used as the source. This is the default behavior if no other policy is configured. configuredIpAddr - the specific IP address configured on one of the switch's IP interfaces (VLAN or loopback) should be used as the source. configuredInterface - an IP address configured on the specified IP interface (VLAN or loopback) should be used as the source. In case of multi-netted interface the lexicographically lowest IP address will be used." DEFVAL { 1 } ::= { hpicfSrcIpAddrPolicyEntry 3 } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.4 hpicfSrcIpAddrIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Index of IP interface whose IP address should be used as source IP while sending application protocol packets. On multi-netted interface the lexicographically lowest IP address will be used. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object." ::= { hpicfSrcIpAddrPolicyEntry 4 } -- 1.3.6.1.4.1.11.2.14.11.1.13.1.1.1.5 hpicfSrcIpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Administratively assigned IP address that should be used as source while sending application protocol packets. This object should be used in conjunction with the 'hpicfSrcIpAddrPolicy' MIB object." ::= { hpicfSrcIpAddrPolicyEntry 5 } -- ********************************************************************** -- Conformance information -- ********************************************************************** -- 1.3.6.1.4.1.11.2.14.11.1.13.2 hpicfSrcIpConformance OBJECT IDENTIFIER ::= { hpicfSrcIpMIB 2 } -- 1.3.6.1.4.1.11.2.14.11.1.13.2.1 hpicfSrcIpGroups OBJECT IDENTIFIER ::= { hpicfSrcIpConformance 1 } -- 1.3.6.1.4.1.11.2.14.11.1.13.2.1.1 hpicfSrcIpBaseGroup OBJECT-GROUP OBJECTS { hpicfSrcIpAddrPolicy, hpicfSrcIpAddrIfIndex, hpicfSrcIpAddress } STATUS current DESCRIPTION "A collection of objects allowing configuration of policies for selecting source IP address for application protocols." ::= { hpicfSrcIpGroups 1 } -- ********************************************************************** -- Compliance statements -- ********************************************************************** -- 1.3.6.1.4.1.11.2.14.11.1.13.2.2 hpicfSrcIpCompliances OBJECT IDENTIFIER ::= { hpicfSrcIpConformance 2 } -- 1.3.6.1.4.1.11.2.14.11.1.13.2.2.1 hpicfSrcIpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The core compliance statement for HP Routing switches with source IP address administrative control." MODULE -- this module MANDATORY-GROUPS { hpicfSrcIpBaseGroup } ::= { hpicfSrcIpCompliances 1 } END