-- Copyright (C) 2014-2015 Hewlett-Packard Development Company, L.P. -- ************************************************************************** -- The contents of this software are proprietary and confidential to the -- Hewlett-Packard Development Company, L.P. No part of this program may be -- photocopied, reproduced, or translated into another programming language -- without prior written consent of the Hewlett-Packard Development Co., L.P. -- ************************************************************************** HP-ICF-RIPNG-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Integer32, Counter32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TruthValue, RowStatus FROM SNMPv2-TC InetAddress, InetAddressType FROM INET-ADDRESS-MIB InterfaceIndex FROM IF-MIB hpSwitch FROM HP-ICF-OID; hpicfRipng MODULE-IDENTITY LAST-UPDATED "201505110000Z" -- May 11, 2015 ORGANIZATION "HP Networking" CONTACT-INFO "Hewlett-Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This is a HP proprietary MIB module to describe the RIPng protocol." REVISION "201505110000Z" DESCRIPTION "Initial revision." ::= { hpSwitch 113} hpicfRipngNotifications OBJECT IDENTIFIER ::= { hpicfRipng 0 } hpicfRipngObjects OBJECT IDENTIFIER ::= { hpicfRipng 1 } hpicfRipngConformance OBJECT IDENTIFIER ::= { hpicfRipng 2 } -- ******************************************************************** -- Base Scalars -- ******************************************************************** hpicfRipngBaseScalars OBJECT IDENTIFIER ::= { hpicfRipngObjects 1 } -- Global Counters -- These counters are intended to facilitate debugging quickly -- changing routes or failing neighbors hpicfRipngGlobalRouteChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of changes to the RIPng routing table, excluding the age refresh." ::= { hpicfRipngBaseScalars 1 } hpicfRipngGlobalQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of responses received from other systems that are sent to the RIPng queries." ::= { hpicfRipngBaseScalars 2 } -- Global Configuration Parameters hpicfRipngAdminStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The admin status of the RIPng routing protocol." ::= { hpicfRipngBaseScalars 3 } hpicfRipngDefaultMetric OBJECT-TYPE SYNTAX Integer32 ( 1..15 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The default metric value for the routes that are redistributed by RIPng." DEFVAL { 1 } ::= { hpicfRipngBaseScalars 4 } hpicfRipngDistance OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The administrative distance to associate with routes learned by RIPng. Routes with distances lower than the other peers in the network are preferred." DEFVAL { 120 } ::= { hpicfRipngBaseScalars 5 } -- Timers hpicfRipngUpdateTime OBJECT-TYPE SYNTAX Unsigned32 (5..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This timer defines the interval between RIPng update messages." DEFVAL { 30 } ::= { hpicfRipngBaseScalars 6} hpicfRipngTimeoutTime OBJECT-TYPE SYNTAX Unsigned32 (5..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "This timer defines the route aging time. If no update message related to that route is received within this period, the metric of this route is set to 16 in the routing table." DEFVAL { 180 } ::= { hpicfRipngBaseScalars 7} hpicfRipngGarbageCollectTime OBJECT-TYPE SYNTAX Unsigned32 (5..65535) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The garbage-collect timer defines the time interval when the metric of a route is 16 to the time when it is deleted from the routing table." DEFVAL { 120 } ::= { hpicfRipngBaseScalars 8} hpicfRipngNotificationEnable OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4)) MAX-ACCESS read-write STATUS current DESCRIPTION "A four-octet string serving as a bit map for the trap events defined by the RIPng traps. This object is used to enable or disable specific RIPng traps where a 1 in the bit field represents enabled. The right-most bit (least significant) represents trap 0. Trap Name BitMap ---------------------------------------- RIPNG_IF_STATE_CHANGE 0x00001 RIPNG_INTF_CONFIG_ERROR 0x00002 RIPNG_INTF_RCV_BAD_PKT 0x00004 RIPNG_ALL_TRAPS 0x00008" ::= { hpicfRipngBaseScalars 9 } -- The RIPng Interface Configuration Table. hpicfRipngIfConfTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfRipngIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of the interfaces that require separate configuration in RIPng." ::= { hpicfRipngObjects 2 } hpicfRipngIfConfEntry OBJECT-TYPE SYNTAX HpicfRipngIfConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single routing domain in a single subnet." INDEX { hpicfRipngIfConfIndex, hpicfRipngIfConfInstId } ::= { hpicfRipngIfConfTable 1 } HpicfRipngIfConfEntry::= SEQUENCE { hpicfRipngIfConfIndex InterfaceIndex, hpicfRipngIfConfInstId Integer32, hpicfRipngIfConfMetric Integer32, hpicfRipngIfConfStatus RowStatus, hpicfRipngIfConfSrcAddressType InetAddressType, hpicfRipngIfConfSrcAddress InetAddress, hpicfRipngIfConfDoPoisonReverse TruthValue } hpicfRipngIfConfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface index of this RIPng interface. It corresponds to the interface index of the IPv6 interface on which RIPng is configured." ::= { hpicfRipngIfConfEntry 1 } hpicfRipngIfConfInstId OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This will allow multiple instances of RIPng to run on the same device. Currently, only one instance is supported." ::= { hpicfRipngIfConfEntry 2 } hpicfRipngIfConfMetric OBJECT-TYPE SYNTAX Integer32 (1..15) MAX-ACCESS read-create STATUS current DESCRIPTION "The RIPng metric for this interface." DEFVAL {1} ::= { hpicfRipngIfConfEntry 3 } hpicfRipngIfConfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable for the hpicfRipngIfConf table." ::= { hpicfRipngIfConfEntry 4 } hpicfRipngIfConfSrcAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type for hpicfRipngIfConfSrcAddress. Only IPv6 addresses without a zone index value are accepted." ::= { hpicfRipngIfConfEntry 5 } hpicfRipngIfConfSrcAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The link-local IPv6 address that this system will use as a source address on this interface." ::= { hpicfRipngIfConfEntry 6 } hpicfRipngIfConfDoPoisonReverse OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "A flag indicating whether the router should perform poison reverse on this interface." DEFVAL { true } ::= { hpicfRipngIfConfEntry 7 } -- Peer Table -- This table provides information about active peer -- relationships intended to assist in debugging. An -- active peer is a router from which a valid RIPng -- update has been heard in the last 180 seconds. hpicfRipngPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF HpicfRipngPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of RIPng peers." ::= { hpicfRipngObjects 3 } hpicfRipngPeerEntry OBJECT-TYPE SYNTAX HpicfRipngPeerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information regarding a single routing peer." INDEX { hpicfRipngPeerAddressType, hpicfRipngPeerAddress } ::= { hpicfRipngPeerTable 1 } HpicfRipngPeerEntry ::= SEQUENCE { hpicfRipngPeerAddressType InetAddressType, hpicfRipngPeerAddress InetAddress, hpicfRipngPeerLastUpdate Unsigned32, hpicfRipngPeerRcvBadPackets Counter32 } hpicfRipngPeerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address type for hpicfRipngPeerAddress. Only IPv6 addresses without a zone index are expected." ::= { hpicfRipngPeerEntry 1 } hpicfRipngPeerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IPv6 address that the peer is using as its source address. On an unnumbered link, this IPv6 address might not be a member of any subnet on the system." ::= { hpicfRipngPeerEntry 2 } hpicfRipngPeerLastUpdate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the most recent RIPng update was received from this peer." ::= { hpicfRipngPeerEntry 3 } hpicfRipngPeerRcvBadPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of RIPng invalid response packets that are received from this peer." ::= { hpicfRipngPeerEntry 4 } -- The RIPng Notification Table -- The RIPng Notification Table record fields that are -- required for notifications. hpicfRipngNotificationEntry OBJECT IDENTIFIER ::= { hpicfRipngObjects 4 } hpicfRipngConfigErrorType OBJECT-TYPE SYNTAX INTEGER { badVersion(1), badIPtype(2), badHop(3), badField(4), ownPkt(5), noError(6) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Potential types of configuration conflicts. Used by hpicfRipngConfigError notifications." ::= { hpicfRipngNotificationEntry 1 } hpicfRipngPacketType OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), nullPacket(3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "RIPng packet types." ::= { hpicfRipngNotificationEntry 2 } hpicfRipngPacketSrcType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The address type for hpicfRipngPacketSrc." ::= { hpicfRipngNotificationEntry 3 } hpicfRipngPacketSrc OBJECT-TYPE SYNTAX InetAddress (SIZE(0|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IPv6 address of an inbound packet that cannot be identified by a peer instance. Only IPv6 addresses without a zone index are expected." ::= { hpicfRipngNotificationEntry 4 } hpicfRipngIfState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2)} MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "RIPng interface state types." ::= { hpicfRipngNotificationEntry 5 } -- Notification Definitions -- The notifications need to be throttled so as to not overwhelm the -- management agent in case of rapid changes to the RIPng module. hpicfRipngIfStateChange NOTIFICATION-TYPE OBJECTS { hpicfRipngIfConfSrcAddress, -- The originator of the notification hpicfRipngIfState -- The new state } STATUS current DESCRIPTION "A hpicfRipngIfStateChange notification signifies that there has been a change in the state of a RIPng interface." ::= { hpicfRipngNotifications 1 } hpicfRipngIfConfigError NOTIFICATION-TYPE OBJECTS { hpicfRipngIfConfSrcAddress, -- The originator of the notification hpicfRipngIfState, -- State of the interface hpicfRipngPacketSrc, -- The IPv6 address of the source hpicfRipngConfigErrorType, -- Type of error hpicfRipngPacketType -- Type of packet } STATUS current DESCRIPTION "A hpicfRipngIfConfigError notification signifies that a packet has been received on an interface from a router whose configuration parameters conflict with this router's configuration parameters." ::= { hpicfRipngNotifications 2 } hpicfRipngIfRxBadPacket NOTIFICATION-TYPE OBJECTS { hpicfRipngIfConfSrcAddress, -- The originator of the notification hpicfRipngIfState, -- State of the interface hpicfRipngPacketSrc, -- The IPv6 address of source hpicfRipngPacketType -- Type of packet } STATUS current DESCRIPTION "A hpicfRipngIfRxBadPacket notification signifies that a RIPng packet that cannot be parsed has been received on this interface." ::= { hpicfRipngNotifications 3 } -- ******************************************************************** -- RIPng Conformance -- ******************************************************************* hpicfRipngCompliances OBJECT IDENTIFIER ::= { hpicfRipngConformance 1 } hpicfRipngGroups OBJECT IDENTIFIER ::= { hpicfRipngConformance 2 } -- ******************************************************************** -- RIPng Complicance -- ******************************************************************** hpicfRipngCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP routing switches that support RIPng." MODULE MANDATORY-GROUPS { hpicfRipngBaseScalarsGroup, hpicfRipngIfConfGroup, hpicfRipngPeerGroup } GROUP hpicfRipngBaseScalarsGroup DESCRIPTION "This group lists the basic scalars that are required for RIPng systems." GROUP hpicfRipngIfConfGroup DESCRIPTION "This group lists the interface configuration for RIPng systems." GROUP hpicfRipngPeerGroup DESCRIPTION "This group lists the peer information for RIPng systems." GROUP hpicfRipngNotificationObjectGroup DESCRIPTION "This group lists the notification objects that are used to record RIPng notification parameters." GROUP hpicfRipngNotificationGroup DESCRIPTION "This group lists the notifications that are required for RIPng systems." ::= { hpicfRipngCompliances 1 } -- -- RIPng Groups -- hpicfRipngBaseScalarsGroup OBJECT-GROUP OBJECTS { hpicfRipngGlobalRouteChanges, hpicfRipngGlobalQueries, hpicfRipngAdminStatus, hpicfRipngDefaultMetric, hpicfRipngDistance, hpicfRipngUpdateTime, hpicfRipngTimeoutTime, hpicfRipngGarbageCollectTime, hpicfRipngNotificationEnable } STATUS current DESCRIPTION "This group lists the basic scalars that are required for the RIPng configuration." ::= { hpicfRipngGroups 1 } hpicfRipngIfConfGroup OBJECT-GROUP OBJECTS { hpicfRipngIfConfMetric, hpicfRipngIfConfStatus, hpicfRipngIfConfSrcAddressType, hpicfRipngIfConfSrcAddress, hpicfRipngIfConfDoPoisonReverse } STATUS current DESCRIPTION "This group lists the interface configuration of RIPng systems." ::= { hpicfRipngGroups 2 } hpicfRipngPeerGroup OBJECT-GROUP OBJECTS { hpicfRipngPeerLastUpdate, hpicfRipngPeerRcvBadPackets } STATUS current DESCRIPTION "A collection of objects that lists peer information." ::= { hpicfRipngGroups 3 } hpicfRipngNotificationObjectGroup OBJECT-GROUP OBJECTS { hpicfRipngConfigErrorType, hpicfRipngPacketType, hpicfRipngPacketSrcType, hpicfRipngPacketSrc, hpicfRipngIfState } STATUS current DESCRIPTION "A collection of objects that are used to record RIPng notification parameters." ::= { hpicfRipngGroups 4 } hpicfRipngNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { hpicfRipngIfStateChange, hpicfRipngIfConfigError, hpicfRipngIfRxBadPacket } STATUS current DESCRIPTION "A collection of objects that lists RIPng notifications." ::= { hpicfRipngGroups 5 } END