-- ================================================================= -- Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: Generic Routing Encapsulation configuration MIB -- Reference: INET-ADDRESS-MIB, IPV6-FLOW-LABEL-MIB, IF-MIB -- Version: V1.2 -- History: -- V1.0 created by Sun Ludong -- 2005-06-04 Initial version -- V1.1 modified by Zhao Chongri -- 2012-10-23 add table hh3cTunnelEviTable and hh3cTunnelEviLinkTable -- modified by Zhao Wenpeng -- 2013-02-28 add table hh3cTunnelGreTable -- V1.2 modified by Yang Chao -- 2013-11-22 added tables hh3cTunnelVxlanIfTable, hh3cTunnelVxlanConfigGroup, -- hh3cTunnelAvailableIDGroup and hh3cTunnelTotalNumTable -- modified by Zhao Chongri -- 2014-4-9 added table hh3cTunnelNvgreIfTable -- ================================================================= HH3C-TUNNEL-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB IPv6FlowLabelOrAny FROM IPV6-FLOW-LABEL-MIB ifIndex, InterfaceIndexOrZero, InterfaceIndex FROM IF-MIB; hh3cTunnel MODULE-IDENTITY LAST-UPDATED "201302280000Z" -- Feb 28, 2013 at 00:00 GMT ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "This MIB contains objects to Manage configuration and Monitor tunnel. " REVISION "201302280000Z" -- Feb 28, 2013 at 00:00 GMT DESCRIPTION "The initial revision of this MIB module. " ::= { hh3cCommon 53 } Hh3cTunnelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Tunnel type definition. " SYNTAX INTEGER { other(1), -- none of the following direct(2), -- no intermediate header gre(3), -- GRE encapsulation minimal(4), -- Minimal encapsulation l2tp(5), -- L2TP encapsulation pptp(6), -- PPTP encapsulation l2f(7), -- L2F encapsulation udp(8), -- UDP encapsulation atmp(9), -- ATMP encapsulation msdp(10), -- MSDP encapsulation sixToFour(11), -- 6to4 encapsulation sixOverFour(12), -- 6over4 encapsulation isatap(13), -- ISATAP encapsulation teredo(14), -- Teredo encapsulation tunnelModeReserve(35), -- 15 to 35 are reserved tunnelModeIPv4Gre(36), -- GRE tunnel, IPv4 as transport protocol tunnelModeIPv6Gre(37), -- GRE tunnel, IPv6 as transport protocol tunnelModeIPv4IPv4(38), -- IPv4 over IPv4 tunnel tunnelModeIPv4IPv6Config(39), -- IPv6 over IPv4 manual tunnel tunnelModeIPv4IPv6Auto(40), -- IPv6 over IPv4 auto tunnel tunnelModeIPv4IPv66to4(41), -- IPv6 over IPv4 6to4 tunnel tunnelModeIPv4IPv6Isatap(42), -- IPv6 over IPv4 isatap tunnel tunnelModeIPv6IPv4(43), -- IPv4 over IPv6 tunnelModeIPv6IPv6(44), -- IPv6 over IPv6 tunnel tunnelModeIPv4UdpDVPN(45), -- IPv4 DVPN tunnel UDP method tunnelModeIPv4GreDVPN(46), -- IPv4 DVPN tunnel GRE method tunnelModeIPv6UdpDVPN(47), -- IPv6 DVPN tunnel UDP method tunnelModeIPv6GreDVPN(48), -- IPv6 DVPN tunnel GRE method tunnelModeCrLsp(49), -- IPv4 CRLSP tunnel tunnelModeMax(50), tunnelModeIPv4UdpVxlan(51), -- IPv4 VXLAN tunnel, UDP method tunnelModeIPv6UdpVxlan(52), -- IPv6 VXLAN tunnel, UDP method tunnelModeIPv4NVGRE(53), -- IPv4 NVGRE tunnel tunnelModeIPv6NVGRE(54) -- IPv6 NVGRE tunnel } hh3cTunnelMIBObjects OBJECT IDENTIFIER ::= { hh3cTunnel 1 } hh3cTunnelTables OBJECT IDENTIFIER ::= { hh3cTunnelMIBObjects 1 } hh3cTunnelIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured tunnels. " ::= { hh3cTunnelTables 1 } hh3cTunnelIfEntry OBJECT-TYPE SYNTAX Hh3cTunnelIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured tunnel. " INDEX { ifIndex } ::= { hh3cTunnelIfTable 1 } Hh3cTunnelIfEntry ::= SEQUENCE { hh3cTunnelIfEncapsMethod Hh3cTunnelType, hh3cTunnelIfHopLimit Integer32, hh3cTunnelIfSecurity INTEGER, hh3cTunnelIfTOS Integer32, hh3cTunnelIfFlowLabel IPv6FlowLabelOrAny, hh3cTunnelIfAddressType InetAddressType, hh3cTunnelIfLocalInetAddress InetAddress, hh3cTunnelIfRemoteInetAddress InetAddress, hh3cTunnelIfEncapsLimit Integer32 } hh3cTunnelIfEncapsMethod OBJECT-TYPE SYNTAX Hh3cTunnelType MAX-ACCESS read-write STATUS current DESCRIPTION "The encapsulation method used by the tunnel. " ::= { hh3cTunnelIfEntry 3 } hh3cTunnelIfHopLimit OBJECT-TYPE SYNTAX Integer32 (0 | 1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The IPv4 TTL or IPv6 Hop Limit to use in the outer IP header. A value of 0 indicates that the value is copied from the payload's header. " ::= { hh3cTunnelIfEntry 4 } hh3cTunnelIfSecurity OBJECT-TYPE SYNTAX INTEGER { none(1), -- no security ipsec(2), -- IPsec security other(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The method used by the tunnel to secure the outer IP header. The value ipsec indicates that IPsec is used between the tunnel endpoints for authentication or encryption or both. More specific security-related information may be available in a MIB module for the security protocol in use. " ::= { hh3cTunnelIfEntry 5 } hh3cTunnelIfTOS OBJECT-TYPE SYNTAX Integer32 (-2..63) MAX-ACCESS read-only STATUS current DESCRIPTION "The method used to set the high 6 bits (the differentiated services codepoint) of the IPv4 TOS or IPv6 Traffic Class in the outer IP header. A value of -1 indicates that the bits are copied from the payload's header. A value of -2 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB module. A value between 0 and 63 inclusive indicates that the bit field is set to the indicated value. " ::= { hh3cTunnelIfEntry 6 } hh3cTunnelIfFlowLabel OBJECT-TYPE SYNTAX IPv6FlowLabelOrAny MAX-ACCESS read-only STATUS current DESCRIPTION "The method used to set the IPv6 Flow Label value. This object need not be present in rows where hh3cTunnelIfAddressType indicates the tunnel is not over IPv6. A value of -1 indicates that a traffic conditioner is invoked and more information may be available in a traffic conditioner MIB. Any other value indicates that the Flow Label field is set to the indicated value. " ::= { hh3cTunnelIfEntry 7 } hh3cTunnelIfAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of address in the corresponding hh3cTunnelIfLocalInetAddress and hh3cTunnelIfRemoteInetAddress objects. " ::= { hh3cTunnelIfEntry 8 } hh3cTunnelIfLocalInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). If the address is unknown, the value is 0.0.0.0 for IPv4 or :: for IPv6. The type of this object is given by hh3cTunnelIfAddressType. " ::= { hh3cTunnelIfEntry 9 } hh3cTunnelIfRemoteInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). If the address is unknown or the tunnel is not a point-to-point link (e.g., if it is a 6to4 tunnel), the value is 0.0.0.0 for tunnels over IPv4 or :: for tunnels over IPv6. The type of this object is given by hh3cTunnelIfAddressType. " ::= { hh3cTunnelIfEntry 10 } hh3cTunnelIfEncapsLimit OBJECT-TYPE SYNTAX Integer32 (-1 | 0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of additional encapsulations permitted for packets undergoing encapsulation at this node. A value of -1 indicates that no limit is present (except as a result of the packet size). " REFERENCE "RFC 2473, section 4.1.1 " ::= { hh3cTunnelIfEntry 11 } hh3cTunnelInetConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelInetConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured tunnels. This table can be used to map a set of tunnel endpoints to the associated ifIndex value. It can also be used for row creation. Note that every row in the hh3cTunnelIfTable with a fixed destination address should have a corresponding row in the hh3cTunnelInetConfigTable, regardless of whether it was created via SNMP. " ::= { hh3cTunnelTables 3 } hh3cTunnelInetConfigEntry OBJECT-TYPE SYNTAX Hh3cTunnelInetConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured tunnel. " INDEX { hh3cTunnelInetConfigSlot, hh3cTunnelInetConfigSubSlot, hh3cTunnelInetConfigTunnNum } ::= { hh3cTunnelInetConfigTable 1 } Hh3cTunnelInetConfigEntry ::= SEQUENCE { hh3cTunnelInetConfigSlot Integer32, hh3cTunnelInetConfigSubSlot Integer32, hh3cTunnelInetConfigTunnNum Integer32, hh3cTunnelInetConfigIfIndex InterfaceIndexOrZero, hh3cTunnelInetConfigStatus RowStatus } hh3cTunnelInetConfigSlot OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Slot number. hh3cTunnelInetConfigSlot, hh3cTunnelInetConfigSubSlot and hh3cTunnelInetConfigTunnNum describe a tunnel interface. For Example, interface tunnel 0/0/25 would be configured as: hh3cTunnelInetConfigSlot 0 hh3cTunnelInetConfigSubSlot 0 hh3cTunnelInetConfigTunnNum 25 " ::= { hh3cTunnelInetConfigEntry 1 } hh3cTunnelInetConfigSubSlot OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Sub slot number. As described in hh3cTunnelInetConfigSlot's description. " ::= { hh3cTunnelInetConfigEntry 2 } hh3cTunnelInetConfigTunnNum OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel number. As described in hh3cTunnelInetConfigSlot's description. " ::= { hh3cTunnelInetConfigEntry 3 } hh3cTunnelInetConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "If the value of hh3cTunnelInetConfigStatus for this row is active, then this object contains the value of ifIndex corresponding to the tunnel interface. A value of 0 is not legal in the active state, and means that the interface index has not yet been assigned. " ::= { hh3cTunnelInetConfigEntry 6 } hh3cTunnelInetConfigStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hh3cTunnelIfTable may be modified while this row is active. To create a row in this table, the management station should set hh3cTunnelInetConfigSlot, hh3cTunnelInetConfigSubSlot, hh3cTunnelInetConfigTunnNum, and set hh3cTunnelInetConfigStatus to createAndGo. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable and the hh3cTunnelIfTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable and in the hh3cTunnelIfTable. " ::= { hh3cTunnelInetConfigEntry 7 } hh3cTunnelEviTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelEviEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured EVI-Tunnel. " ::= { hh3cTunnelTables 4 } hh3cTunnelEviEntry OBJECT-TYPE SYNTAX Hh3cTunnelEviEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured EVI-Tunnel. " INDEX { hh3cTunnelEviTunnNum } ::= { hh3cTunnelEviTable 1 } Hh3cTunnelEviEntry ::= SEQUENCE { hh3cTunnelEviTunnNum Integer32, hh3cTunnelEviIfIndex InterfaceIndex, hh3cTunnelEviStatus RowStatus, hh3cTunnelEviAddressType InetAddressType, hh3cTunnelEviLocalAddr InetAddress, hh3cTunnelEviNetworkID Integer32, hh3cTunnelEviKeepaliveInterval Integer32, hh3cTunnelEviKeepaliveTimes Integer32 } hh3cTunnelEviTunnNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel number. An identifier used to distinguish between multiple tunnels. " ::= { hh3cTunnelEviEntry 1 } hh3cTunnelEviIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. " ::= { hh3cTunnelEviEntry 2 } hh3cTunnelEviStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hh3cTunnelEviTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. " ::= { hh3cTunnelEviEntry 3 } hh3cTunnelEviAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address in the corresponding hh3cTunnelEviLocalAddr objects. Can not be modified after creation. " ::= { hh3cTunnelEviEntry 4 } hh3cTunnelEviLocalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). The type of this object is given by hh3cTunnelEviAddressType. " ::= { hh3cTunnelEviEntry 5 } hh3cTunnelEviNetworkID OBJECT-TYPE SYNTAX Integer32 (0..16777215) MAX-ACCESS read-create STATUS current DESCRIPTION "The method used to assign a network ID to an EVI-Tunnel interface. Assign the same network ID to the EVI-Tunnel interfaces of all edge devices in an EVI network. A value of 0 indicates that no network ID is assigned to any EVI-Tunnel interface. " ::= { hh3cTunnelEviEntry 6 } hh3cTunnelEviKeepaliveInterval OBJECT-TYPE SYNTAX Integer32 (1..32767) MAX-ACCESS read-create STATUS current DESCRIPTION "The method used to assign the keepalive interval. " ::= { hh3cTunnelEviEntry 7 } hh3cTunnelEviKeepaliveTimes OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. " ::= { hh3cTunnelEviEntry 8 } hh3cTunnelEviLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelEviLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured EVI-Link. " ::= { hh3cTunnelTables 5 } hh3cTunnelEviLinkEntry OBJECT-TYPE SYNTAX Hh3cTunnelEviLinkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured EVI-Link. " INDEX { hh3cTunnelEviTunnNum, hh3cTunnelEviLinkNum } ::= { hh3cTunnelEviLinkTable 1 } Hh3cTunnelEviLinkEntry ::= SEQUENCE { hh3cTunnelEviLinkNum Integer32, hh3cTunnelEviLinkIfIndex InterfaceIndex, hh3cTunnelEviLinkAddressType InetAddressType, hh3cTunnelEviLinkRemoteAddr InetAddress } hh3cTunnelEviLinkNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "EVI-Link number. " ::= { hh3cTunnelEviLinkEntry 1 } hh3cTunnelEviLinkIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. " ::= { hh3cTunnelEviLinkEntry 2 } hh3cTunnelEviLinkAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address in the corresponding hh3cTunnelEviLinkRemoteAddr objects. Can not be modified after creation. " ::= { hh3cTunnelEviLinkEntry 3 } hh3cTunnelEviLinkRemoteAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). " ::= { hh3cTunnelEviLinkEntry 4} hh3cTunnelGreTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelGreEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured Gre-Tunnel. " ::= { hh3cTunnelTables 6 } hh3cTunnelGreEntry OBJECT-TYPE SYNTAX Hh3cTunnelGreEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured Gre-Tunnel. " INDEX { hh3cTunnelGreTunnNum } ::= { hh3cTunnelGreTable 1 } Hh3cTunnelGreEntry ::= SEQUENCE { hh3cTunnelGreTunnNum Integer32, hh3cTunnelGreTunnIfIndex InterfaceIndex, hh3cTunnelGreAddressType InetAddressType, hh3cTunnelGreLocalAddr InetAddress, hh3cTunnelGreRemoteAddr InetAddress, hh3cTunnelGreKeepaliveEnabled TruthValue, hh3cTunnelGreKeepaliveInterval Integer32, hh3cTunnelGreKeepaliveTimes Integer32, hh3cTunnelGreSlbgGroupNum Unsigned32, hh3cTunnelGreTunnStatus RowStatus } hh3cTunnelGreTunnNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel number. An identifier used to distinguish between multiple tunnels. " ::= { hh3cTunnelGreEntry 1 } hh3cTunnelGreTunnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. " ::= { hh3cTunnelGreEntry 2 } hh3cTunnelGreAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address in the corresponding hh3cTunnelGreLocalAddr and hh3cTunnelGreRemoteAddr objects. " ::= { hh3cTunnelGreEntry 3 } hh3cTunnelGreLocalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). " ::= { hh3cTunnelGreEntry 4 } hh3cTunnelGreRemoteAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). " ::= { hh3cTunnelGreEntry 5 } hh3cTunnelGreKeepaliveEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This MIB object specifies whether or not keepalive is used. A value of true indicates that keepalive SHOULD be used. When keepalive is not be used, the value of hh3cTunnelGreKeepaliveInterval and hh3cTunnelGreKeepaliveTimes MUST be zero. " DEFVAL { false } ::= { hh3cTunnelGreEntry 6 } hh3cTunnelGreKeepaliveInterval OBJECT-TYPE SYNTAX Integer32 (0..32767) MAX-ACCESS read-create STATUS current DESCRIPTION "The method used to assign the keepalive interval. The value is zero when keepalive is not used. The valid value is from 1 to 32767, when keepalive is used. " DEFVAL { 0 } ::= { hh3cTunnelGreEntry 7 } hh3cTunnelGreKeepaliveTimes OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The method used to assign the keepalive maximum number of consecutive keepalive failures that are allowed. The value is zero when keepalive is not used. The valid value is from 1 to 255, when keepalive is used. " DEFVAL { 0 } ::= { hh3cTunnelGreEntry 8 } hh3cTunnelGreSlbgGroupNum OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The method used to assign the service-loopback-group. " ::= { hh3cTunnelGreEntry 9 } hh3cTunnelGreTunnStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hh3cTunnelGreTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. " ::= { hh3cTunnelGreEntry 10 } hh3cTunnelVxlanIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelVxlanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured Vxlan-Tunnel. " ::= { hh3cTunnelTables 7 } hh3cTunnelVxlanIfEntry OBJECT-TYPE SYNTAX Hh3cTunnelVxlanIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured Vxlan-Tunnel. " INDEX { hh3cTunnelVxlanIfTunnNum } ::= { hh3cTunnelVxlanIfTable 1 } Hh3cTunnelVxlanIfEntry ::= SEQUENCE { hh3cTunnelVxlanIfTunnNum Integer32, hh3cTunnelVxlanTunnIfIndex InterfaceIndex, hh3cTunnelVxlanIfAddressType InetAddressType, hh3cTunnelVxlanIfLocalAddr InetAddress, hh3cTunnelVxlanIfRemoteAddr InetAddress, hh3cTunnelVxlanIfStatus RowStatus } hh3cTunnelVxlanIfTunnNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel number. An identifier used to distinguish between multiple tunnels. " ::= { hh3cTunnelVxlanIfEntry 1 } hh3cTunnelVxlanTunnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. " ::= { hh3cTunnelVxlanIfEntry 2 } hh3cTunnelVxlanIfAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address in the corresponding hh3cTunnelVxlanIfLocalAddr and hh3cTunnelVxlanIfRemoteAddr objects. " ::= { hh3cTunnelVxlanIfEntry 3 } hh3cTunnelVxlanIfLocalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). " ::= { hh3cTunnelVxlanIfEntry 4 } hh3cTunnelVxlanIfRemoteAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). " ::= { hh3cTunnelVxlanIfEntry 5 } hh3cTunnelVxlanIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hh3cTunnelVxlanIfTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. " ::= { hh3cTunnelVxlanIfEntry 6 } hh3cTunnelVxlanConfigGroup OBJECT IDENTIFIER ::= { hh3cTunnelTables 8 } hh3cTunnelVxlanUdpPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The UDP port number for Vxlan Tunnels." ::= { hh3cTunnelVxlanConfigGroup 1 } hh3cTunnelVxlanDropWrongCksmPkt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not dropping invalid UDP chesksum Vxlan packet." ::= { hh3cTunnelVxlanConfigGroup 2 } hh3cTunnelVxlanDropVlanTagPkt OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Whether or not dropping Vxlan packet with inner VLAN tag." ::= { hh3cTunnelVxlanConfigGroup 3 } hh3cTunnelAvailableIDGroup OBJECT IDENTIFIER ::= { hh3cTunnelTables 9 } hh3cTunnelAvailableID OBJECT-TYPE SYNTAX Integer32 (-1 | 1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The available tunnel ID. A value of -1 indicates that there is no available tunnel ID." ::= { hh3cTunnelAvailableIDGroup 1 } hh3cTunnelTotalNumTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelTotalNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Total number of a particular method tunnel." ::= { hh3cTunnelTables 10 } hh3cTunnelTotalNumEntry OBJECT-TYPE SYNTAX Hh3cTunnelTotalNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Total number of a particular method tunnel." INDEX { hh3cTunnelEncapsMethod } ::= { hh3cTunnelTotalNumTable 1 } Hh3cTunnelTotalNumEntry ::= SEQUENCE { hh3cTunnelEncapsMethod Hh3cTunnelType, hh3cTunnelTotalNum Unsigned32 } hh3cTunnelEncapsMethod OBJECT-TYPE SYNTAX Hh3cTunnelType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The encapsulation method used by the tunnel." ::= { hh3cTunnelTotalNumEntry 1 } hh3cTunnelTotalNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of a particular method tunnel. " ::= { hh3cTunnelTotalNumEntry 2 } hh3cTunnelNvgreIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cTunnelNvgreIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (conceptual) table containing information on configured Nvgre-Tunnel. " ::= { hh3cTunnelTables 11 } hh3cTunnelNvgreIfEntry OBJECT-TYPE SYNTAX Hh3cTunnelNvgreIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) containing the information on a particular configured Nvgre-Tunnel. " INDEX { hh3cTunnelNvgreIfTunnNum } ::= { hh3cTunnelNvgreIfTable 1 } Hh3cTunnelNvgreIfEntry ::= SEQUENCE { hh3cTunnelNvgreIfTunnNum Integer32, hh3cTunnelNvgreTunnIfIndex InterfaceIndex, hh3cTunnelNvgreIfAddressType InetAddressType, hh3cTunnelNvgreIfLocalAddr InetAddress, hh3cTunnelNvgreIfRemoteAddr InetAddress, hh3cTunnelNvgreIfStatus RowStatus } hh3cTunnelNvgreIfTunnNum OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Tunnel number. An identifier used to distinguish between multiple tunnels. " ::= { hh3cTunnelNvgreIfEntry 1 } hh3cTunnelNvgreTunnIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value, greater than zero, for each interface. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization. " ::= { hh3cTunnelNvgreIfEntry 2 } hh3cTunnelNvgreIfAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The type of address in the corresponding hh3cTunnelNvgreIfLocalAddr and hh3cTunnelNvgreIfRemoteAddr objects. " ::= { hh3cTunnelNvgreIfEntry 3 } hh3cTunnelNvgreIfLocalAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the local endpoint of the tunnel (i.e., the source address used in the outer IP header). " ::= { hh3cTunnelNvgreIfEntry 4 } hh3cTunnelNvgreIfRemoteAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The address of the remote endpoint of the tunnel (i.e., the destination address used in the outer IP header). " ::= { hh3cTunnelNvgreIfEntry 5 } hh3cTunnelNvgreIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row, by which new entries may be created, or old entries deleted from this table. The agent need not support setting this object to createAndWait or notInService since there are no other writable objects in this table, and writable objects in rows of corresponding tables such as the hh3cTunnelNvgreIfTable may be modified while this row is active. Creating a row in this table will cause an interface index to be assigned by the agent in an implementation-dependent manner, and corresponding rows will be instantiated in the ifTable. The status of this row will become active as soon as the agent assigns the interface index, regardless of whether the interface is operationally up. Deleting a row in this table will likewise delete the corresponding row in the ifTable. " ::= { hh3cTunnelNvgreIfEntry 6 } END