-- ================================================================= -- Copyright (C) 2006 by H3C TECHNOLOGIES. All rights reserved -- -- Description: Private MIB for RCP information -- Reference: -- Version: V1.0 -- History: -- V1.0 2006-09-20, Created by ChaiYongfu -- ================================================================= HH3C-RCP-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cRCP FROM HH3C-OID-MIB OBJECT-TYPE, MODULE-IDENTITY, Integer32 FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue FROM SNMPv2-TC InetAddressType, InetAddress FROM INET-ADDRESS-MIB InterfaceIndexOrZero FROM IF-MIB; hh3cRCPMIB MODULE-IDENTITY LAST-UPDATED "200609200000Z" ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "The MIB module is used for managing RCP protocol server." REVISION "200609200000Z" DESCRIPTION "The Initial Version of hh3cRCPMIB." ::= { hh3cRCP 1 } hh3cRCPLeaf OBJECT IDENTIFIER ::= { hh3cRCPMIB 1 } hh3cRCPServerEnableStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This attribute controls the system wide operation of RCP server. The value TRUE means that the RCP server is enabled. The value FALSE means that the RCP server is disabled." ::= { hh3cRCPLeaf 1 } hh3cRCPConnTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum time in seconds that a RCP client connection is idle." ::= { hh3cRCPLeaf 2 } hh3cRCPRuleTimeout OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time in seconds before a RCP rule is aged out. If its value is 0, it indicates RCP rule will not be aged out." ::= { hh3cRCPLeaf 3 } hh3cRCPServerMaxConn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the maximum number of clients that permitted to connect with RCP server at the same time." ::= { hh3cRCPLeaf 4 } hh3cRCPServerCurConn OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current actual number of clients that connecting with RCP server." ::= { hh3cRCPLeaf 5 } hh3cRCPConnTimeoutMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum value of hh3cRCPConnTimeout." ::= { hh3cRCPLeaf 6 } hh3cRCPRuleTimeoutMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum value of hh3cRCPRuleTimeout." ::= { hh3cRCPLeaf 7 } hh3cRCPServerMaxConnMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum value of hh3cRCPServerMaxConn." ::= { hh3cRCPLeaf 8 } hh3cRCPBalanceGroupIdMinValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the minimum value of balance group identity." ::= { hh3cRCPLeaf 9 } hh3cRCPBalanceGroupIdMaxValue OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the maximum value of balance group identity." ::= { hh3cRCPLeaf 10 } hh3cRCPTotalUsers OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total number of RCP user." ::= { hh3cRCPLeaf 11 } hh3cRCPTotalClientIPs OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the total number of RCP client IP." ::= { hh3cRCPLeaf 12 } hh3cRCPTable OBJECT IDENTIFIER ::= { hh3cRCPMIB 2 } hh3cRCPUserTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cRCPUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RCP User Info Table." ::= { hh3cRCPTable 1 } hh3cRCPUserEntry OBJECT-TYPE SYNTAX Hh3cRCPUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cRCPUserTable." INDEX { hh3cRCPUserName } ::= { hh3cRCPUserTable 1 } Hh3cRCPUserEntry ::= SEQUENCE { hh3cRCPUserName DisplayString, hh3cRCPUserPassword DisplayString, hh3cRCPUserRedirectInterface InterfaceIndexOrZero, hh3cRCPUserRedirectBalanceGroup Integer32, hh3cRCPUserRowStatus RowStatus } hh3cRCPUserName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of RCP user." ::= { hh3cRCPUserEntry 1 } hh3cRCPUserPassword OBJECT-TYPE SYNTAX DisplayString(SIZE(1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION " The password of RCP user. It is invisible to users and displayed as '***'." ::= { hh3cRCPUserEntry 2 } hh3cRCPUserRedirectInterface OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The redirect interface index of RCP user. The RCP rule assigned by the user can be associated with the redirect interface. If the redirect interface is invalid, its value is set to be 0." ::= { hh3cRCPUserEntry 3 } hh3cRCPUserRedirectBalanceGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The redirect balance group identity of RCP user. The RCP rule assigned by the user can be associated with the redirect balance group. If the balance group is invalid, its value is set to be 0." ::= { hh3cRCPUserEntry 4 } hh3cRCPUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This manages the creation and deletion of rows, and shows the current status of the indexed user name. This object has the following values. active(1) The indexed user name is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new user. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hh3cRCPUserRowStatus is active(1). When deleting an inexistence entry, return noError." ::= { hh3cRCPUserEntry 5 } hh3cRCPClientIPTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cRCPClientIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RCP Client IP Table." ::= { hh3cRCPTable 2 } hh3cRCPClientIPEntry OBJECT-TYPE SYNTAX Hh3cRCPClientIPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cRCPClientIPTable." INDEX { hh3cRCPClientIPType, hh3cRCPClientIP } ::= { hh3cRCPClientIPTable 1 } Hh3cRCPClientIPEntry ::= SEQUENCE { hh3cRCPClientIPType InetAddressType, hh3cRCPClientIP InetAddress, hh3cRCPClientIPRowStatus RowStatus } hh3cRCPClientIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address type (IPv4 or IPv6) of RCP client." ::= { hh3cRCPClientIPEntry 1 } hh3cRCPClientIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of RCP client." ::= { hh3cRCPClientIPEntry 2 } hh3cRCPClientIPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This manages the creation and deletion or rows, and shows the current status of the indexed client IP address. This object has the following values. active(1) The indexed client IP is configured on the device. notInService(2) Not Supported. notReady(3) Not Supported. createAndGo(4) Create a new client IP. createAndWait(5) Not Supported. destroy(6) Delete this entry. The associated entry can be modified when the value of hh3cRCPClientIPRowStatus is active(1). When deleting an inexistence entry, return noError." ::= { hh3cRCPClientIPEntry 3 } hh3cRCPSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cRCPSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "RCP session Table." ::= { hh3cRCPTable 3 } hh3cRCPSessionEntry OBJECT-TYPE SYNTAX Hh3cRCPSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cRCPSessionTable." INDEX { hh3cRCPSessionId } ::= { hh3cRCPSessionTable 1 } Hh3cRCPSessionEntry ::= SEQUENCE { hh3cRCPSessionId Integer32, hh3cRCPSessionClientIPType InetAddressType, hh3cRCPSessionClientIP InetAddress, hh3cRCPSessionRunningStatus INTEGER, hh3cRCPSessionUserName DisplayString } hh3cRCPSessionId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "RCP session identity." ::= { hh3cRCPSessionEntry 1 } hh3cRCPSessionClientIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address type (IPv4 or IPv6) of RCP client." ::= { hh3cRCPSessionEntry 2 } hh3cRCPSessionClientIP OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "RCP client IP address." ::= { hh3cRCPSessionEntry 3 } hh3cRCPSessionRunningStatus OBJECT-TYPE SYNTAX INTEGER { connected(1), operational(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "RCP server running status. It is one of the following status: connected: The connection is established and the RCP client is waiting for authentication. operational: The RCP client is authenticated and the server is ready for rule configuration request." ::= { hh3cRCPSessionEntry 4 } hh3cRCPSessionUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "RCP user name." ::= { hh3cRCPSessionEntry 5 } END