-- ============================================================================ -- Copyright (C) 2003 by H3C TECHNOLOGIES. All rights reserved. -- -- Description: -- Reference: -- Version: V1.00 -- History: -- V1.00 Created by Zhouzhihua, 2004.11.12 -- ============================================================================ HH3C-NS-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB TimeTicks, IpAddress, Integer32, Counter32, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC; hh3cNS MODULE-IDENTITY LAST-UPDATED "200411071353Z" -- November 07, 2004 at 13:53 GMT ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Tech. Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip:100085 " DESCRIPTION "This MIB contains objects to manage the configuration and status information of network traffic statistics. It classifies the IP packets by source IP address, source port, destination IP address, destination port, protocol, ToS and input interface, counts the octets and packets, and sends the statistic information to the specific collector. " REVISION "200409211415Z" -- September 21, 2004 at 14:15 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hh3cCommon 20 } hh3cNSMibObjects OBJECT IDENTIFIER ::= { hh3cNS 1 } hh3cNSMibScalarObjects OBJECT IDENTIFIER ::= { hh3cNSMibObjects 1 } hh3cNSActiveTime OBJECT-TYPE SYNTAX Integer32 (1..60) MAX-ACCESS read-write STATUS current DESCRIPTION "The stream will be aged when the active time of this stream exceeds this value. This object is in minute." DEFVAL { 30 } ::= { hh3cNSMibScalarObjects 1 } hh3cNSInactiveTime OBJECT-TYPE SYNTAX Integer32 (1..600) MAX-ACCESS read-write STATUS current DESCRIPTION "The stream will be aged when the inactive time of this stream exceeds this value. This object is in second." DEFVAL { 60 } ::= { hh3cNSMibScalarObjects 2 } hh3cNSVersion OBJECT-TYPE SYNTAX Integer32 ( 5|9 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The version of the exported packet, which describes the format of the exported packet. It should export version 5 and version 8 when this object is 5, but it should export version 9 only when the value of this object is 9. " DEFVAL { 5 } ::= { hh3cNSMibScalarObjects 3 } hh3cNSAsType OBJECT-TYPE SYNTAX INTEGER { peerAs(1), originAs(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The number of autonomous system (AS). This object can be origin or peer." DEFVAL { peerAs } ::= { hh3cNSMibScalarObjects 4 } hh3cNSTemplateRefreshRate OBJECT-TYPE SYNTAX Integer32 (1..600 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the refresh rate in number of exported packets." DEFVAL { 20 } ::= { hh3cNSMibScalarObjects 5 } hh3cNSTemplateTimeout OBJECT-TYPE SYNTAX Integer32 ( 1..3600 ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the timeout rate in minutes." DEFVAL { 30 } ::= { hh3cNSMibScalarObjects 6 } hh3cNSExportVlanOrIfIndex OBJECT-TYPE SYNTAX INTEGER { vlanId(1), interfaceIndex(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the interface index at the exported packet. It can be interface index or vlan id according to the product." DEFVAL { vlanId } ::= { hh3cNSMibScalarObjects 7 } hh3cNSProcessSlotTable OBJECT-TYPE SYNTAX SEQUENCE OF HH3CNSProcessSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the board which can enable network traffic statistics at the switch or router." ::= { hh3cNSMibObjects 2 } hh3cNSProcessSlotEntry OBJECT-TYPE SYNTAX HH3CNSProcessSlotEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cNSProcessSlotEntry." INDEX { hh3cNSProcessSlot } ::= { hh3cNSProcessSlotTable 1 } HH3CNSProcessSlotEntry ::= SEQUENCE { hh3cNSProcessSlot Integer32 } hh3cNSProcessSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes all boards which can processes network traffic statistics at the switch or router." ::= { hh3cNSProcessSlotEntry 1 } hh3cNSExportConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HH3CNSExportConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the configuration of the exported packets." ::= { hh3cNSMibObjects 3 } hh3cNSExportConfigEntry OBJECT-TYPE SYNTAX HH3CNSExportConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cNSExportConfigTable." INDEX { hh3cNSAggregationType } ::= { hh3cNSExportConfigTable 1 } HH3CNSExportConfigEntry ::= SEQUENCE { hh3cNSAggregationType INTEGER, hh3cNSHostIPAddr IpAddress, hh3cNSHostPort Integer32, hh3cNSSrcIpAddr IpAddress, hh3cNSState INTEGER } hh3cNSAggregationType OBJECT-TYPE SYNTAX INTEGER { v5Statistics(1), as(2), destinationPrefix(3), sourcePrefix(4), protocolPort(5), prefix(6), tosAs(7), tosDestinationPrefix(8), tosSourcePrefix(9), tosProtocolPort(10), tosPrefix(11), prefixPort(12) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The aggregation type. v5Statistics type counts IP packets which have same source IP address, destination IP address, source port, destination port, protocol, ToS, input interface, output interface. AS type counts IP packets which have same source AS, destination AS, input interface and output interface. destinationPrefix type counts IP packets which have same destination AS, output interface, destination mask and destination prefix. sourcePrefix type counts IP packets which have same source AS, input interface, source mask and source prefix. protocolPort type counts IP packets which have same protocol, source port and destination port. prefix type counts IP packets which have same source AS, destination AS, input interface, output interface, source mask, source prefix, destination mask, destination prefix. tosAS type counts IP packets which have same tos, source AS, destination AS, input interface and output interface. tosDestinationPrefix type counts IP packets which have same tos, destination AS, output interface, destination mask and destination prefix. tosProtocolPort type counts IP packets which have same tos, protocol, source port and destination port. tosSourcePrefix type counts IP packets which have same tos, source AS, input interface, source mask and source prefix. tosPrefix type counts IP packets which have same tos, source AS, destination AS, input interface, output interface, source mask, source prefix, destination mask, destination prefix. prefixPort type counts IP packets which have same tos, input interface, output interface, source mask, source prefix, destination mask, destination prefix, source port and destination port." ::= { hh3cNSExportConfigEntry 1 } hh3cNSHostIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The destination IP address of the exported packet. This destination IP address is a NSC (NS Collector) address." ::= { hh3cNSExportConfigEntry 2 } hh3cNSHostPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination port of the exported packets. This destination port is a NSC listening port." ::= { hh3cNSExportConfigEntry 3 } hh3cNSSrcIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The source IP address of the exported packets." ::= { hh3cNSExportConfigEntry 4 } hh3cNSState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of aggregation is enabled or disabled." ::= { hh3cNSExportConfigEntry 5 } hh3cNSExportInformationTable OBJECT-TYPE SYNTAX SEQUENCE OF HH3CNSExportInformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the Information of the exported packets." ::= { hh3cNSMibObjects 4 } hh3cNSExportInformationEntry OBJECT-TYPE SYNTAX HH3CNSExportInformationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cNSExportInformationTable." INDEX { hh3cNSExportType, hh3cNSExportSlot } ::= { hh3cNSExportInformationTable 1 } HH3CNSExportInformationEntry ::= SEQUENCE { hh3cNSExportType INTEGER, hh3cNSExportSlot Integer32, hh3cNSExportStream Counter32, hh3cNSExportNum Counter32, hh3cNSExportFail Counter32 } hh3cNSExportType OBJECT-TYPE SYNTAX INTEGER ( 1..12 ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is equal to hh3cNSAggregationType." ::= { hh3cNSExportInformationEntry 1 } hh3cNSExportSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is equal to hh3cNSProcessSlot." ::= { hh3cNSExportInformationEntry 2 } hh3cNSExportStream OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the exported streams." ::= { hh3cNSExportInformationEntry 3 } hh3cNSExportNum OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the exported packets." ::= { hh3cNSExportInformationEntry 4 } hh3cNSExportFail OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts the exported packets which failed to send. The error may be unreachable destination IP address." ::= { hh3cNSExportInformationEntry 5 } hh3cNSConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HH3CNSConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes current configurations." ::= { hh3cNSMibObjects 5 } hh3cNSConfigEntry OBJECT-TYPE SYNTAX HH3CNSConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cNSAggregationTable." INDEX { hh3cNSSourceSlot, hh3cNSSourceIfIndex, hh3cNSDestSlot } ::= { hh3cNSConfigTable 1 } HH3CNSConfigEntry ::= SEQUENCE { hh3cNSSourceSlot Integer32, hh3cNSSourceIfIndex Integer32, hh3cNSDestSlot Integer32, hh3cNSDirect INTEGER, hh3cNSACLNumber Integer32, hh3cNSACLName OCTET STRING, hh3cNSACLRule Integer32, hh3cNSConfigRowStatus RowStatus } hh3cNSSourceSlot OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP packet will be counted when it is passing through this slot." ::= { hh3cNSConfigEntry 1 } hh3cNSSourceIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP packet will be statistics when it through this interface. This object is equal to ifIndex at ifTable." ::= { hh3cNSConfigEntry 2 } hh3cNSDestSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is equal to hh3cNSProcessSlot." ::= { hh3cNSConfigEntry 3 } hh3cNSDirect OBJECT-TYPE SYNTAX INTEGER { inbound(1), outbound(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object describes which packets will be counted. It may be inbound or outbound packets through this interface." DEFVAL { inbound } ::= { hh3cNSConfigEntry 4 } hh3cNSACLNumber OBJECT-TYPE SYNTAX Integer32 (0 | 2000..3999) MAX-ACCESS read-create STATUS current DESCRIPTION "The number of number-acl group." ::= { hh3cNSConfigEntry 5 } hh3cNSACLName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS current DESCRIPTION "The name of name-acl group." ::= { hh3cNSConfigEntry 6 } hh3cNSACLRule OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "The rule of acl group." ::= { hh3cNSConfigEntry 7 } hh3cNSConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "SNMP Row Status Variable. Writable objects in the table may be written in any RowStatus state." ::= { hh3cNSConfigEntry 8 } hh3cNSStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF HH3CNSStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes current information of network traffic." ::= { hh3cNSMibObjects 6 } hh3cNSStatusEntry OBJECT-TYPE SYNTAX HH3CNSStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of hh3cNSAggregationTable." INDEX { hh3cNSSlot } ::= { hh3cNSStatusTable 1 } HH3CNSStatusEntry ::= SEQUENCE { hh3cNSSlot Integer32, hh3cNSActiveStreamNumber Counter32, hh3cNSTotalStreamNumber Counter32, hh3cNSTotalPacketNumber Counter32, hh3cNSTotalOctetNumber Counter32, hh3cNSMPLSActiveStreamNumber Counter32, hh3cNSMPLSTotalStreamNumber Counter32, hh3cNSMPLSTotalPacketNumber Counter32, hh3cNSMPLSTotalOctetNumber Counter32, hh3cNSResetFlag INTEGER, hh3cNSResetTime TimeTicks } hh3cNSSlot OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is equal to hh3cNSProcessSlot." ::= { hh3cNSStatusEntry 1 } hh3cNSActiveStreamNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts current active streams." ::= { hh3cNSStatusEntry 2 } hh3cNSTotalStreamNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts all statistic streams." ::= { hh3cNSStatusEntry 3 } hh3cNSTotalPacketNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts all statistic packets." ::= { hh3cNSStatusEntry 4 } hh3cNSTotalOctetNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts all statistic octets." ::= { hh3cNSStatusEntry 5 } hh3cNSMPLSActiveStreamNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts current active MPLS streams." ::= { hh3cNSStatusEntry 6 } hh3cNSMPLSTotalStreamNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts all statistic MPLS streams." ::= { hh3cNSStatusEntry 7 } hh3cNSMPLSTotalPacketNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts all statistic MPLS packets." ::= { hh3cNSStatusEntry 8 } hh3cNSMPLSTotalOctetNumber OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object counts all statistic octets of MPLS packets." ::= { hh3cNSStatusEntry 9 } hh3cNSResetFlag OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "Reset all streams. The default value is disabled, and set this value to enabled when resetting." DEFVAL { disable } ::= { hh3cNSStatusEntry 10 } hh3cNSResetTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The system up time when stream is reset." ::= { hh3cNSStatusEntry 11 } END