-- ================================================================= -- Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: interface extension mib -- Reference: IF-MIB -- Version: V1.8 -- History: -- V1.0 created by gaolong -- Initial version 2004-11-13 -- V1.1 2007-01-13 Modified by wanglirong -- Add hh3cIfStatGlobalFlowInterval and hh3cIfSpeedStatTable -- V1.2 Modified by chenxi -- Add hh3cRTParentIfTable, hh3cRTSubIfTable and -- hh3cIfLinkModeTable 2007-10-15 -- V1.3 2009-05-05 Add hh3cIfPhysicalNumber, hh3cIfTable -- V1.4 2009-08-08 Add hh3cIfMtu, hh3cIfBandwidth, hh3cIfDiscardPktRate, -- hh3cIfExtTrapCfgTable -- V1.5 2010-09-04 Add hh3cIfInNUcastPkts, hh3cIfOutNUcastPkts and hh3cIfStatusKeepTime by shuaixj -- V1.6 2011-09-16 Add hh3cIfHCFlowStatTable by xiedong -- 2011-11-04 Add hh3cIfIsPoe by duyanbing -- V1.7 2013-09-13 Added hh3cIfOperStatus and hh3cIfDownTimes by duyanbing -- V1.8 2014-07-23 Added hh3cIfShutDownInterval and hh3cIfUsingTable by xiedong -- 2014-09-19 Added hh3cIfDampeningSuppressed and hh3cIfDampeningNotSuppressed by yinzhonghong -- ================================================================= HH3C-IF-EXT-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB ifIndex, ifDescr FROM IF-MIB Integer32, Counter64, Unsigned32, TimeTicks, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE FROM SNMPv2-SMI CounterBasedGauge64 FROM HCNUM-TC DisplayString, RowStatus, TruthValue FROM SNMPv2-TC; hh3cIfExt MODULE-IDENTITY LAST-UPDATED "200905061936Z" -- May 6, 2009 at 19:36 GMT ORGANIZATION "Hangzhou H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.h3c.com Zip: 100085" DESCRIPTION "This MIB is an extension of interface MIBs such as IF-MIB. This MIB is applicable to routers, switches and other products. Some objects in this may be used only for some specific products, so users should refer to the related documents to acquire more detailed information. " REVISION "200905061936Z" DESCRIPTION "Update this MIB module." REVISION "200411131936Z" -- December 13, 2004 at 19:36 GMT DESCRIPTION "The initial revision of this MIB module." ::= { hh3cCommon 40 } -- -- Node definitions -- -- Scalar MIB objects, which are considered as global variables -- to all interfaces in a device, are defined in this section. hh3cIfExtScalarGroup OBJECT IDENTIFIER ::= { hh3cIfExt 1 } hh3cIfStatGlobalFlowInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling interval for in/out flow of all interfaces. Setting zero indicates closing the statistic function." ::= { hh3cIfExtScalarGroup 1 } hh3cIfShutDownInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Set the port status detection timer. The device starts a port status detection timer when a port is shut down by a protocol. Once the timer expires, the device brings up the port so the port status reflects the port's physical status." ::= { hh3cIfExtScalarGroup 2 } -- ================================================================= -- All other groups are defined below. Of course, scalar objects can -- also be defined in a sub section, but they must be one part of -- that sub section. -- Note that a scalar group should be defined firstly and all -- scalar objects are placed under that group when doing so. hh3cIfExtGroup OBJECT IDENTIFIER ::= { hh3cIfExt 2 } -- ================================================================= -- The section below describes statistics of interfaces in a device. -- These statistics may not be included in standard MIBs. hh3cIfStat OBJECT IDENTIFIER ::= { hh3cIfExtGroup 1 } -- Define a scalar group which consists of all scalar objects used for -- interface statistics. hh3cIfStatScalarGroup OBJECT IDENTIFIER ::= { hh3cIfStat 1 } hh3cIfStatTable OBJECT IDENTIFIER ::= { hh3cIfStat 2 } hh3cIfFlowStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get statistic information of interfaces on a device." ::= { hh3cIfStatTable 1 } hh3cIfFlowStatEntry OBJECT-TYPE SYNTAX Hh3cIfFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry items" INDEX { ifIndex } ::= { hh3cIfFlowStatTable 1 } Hh3cIfFlowStatEntry ::= SEQUENCE { hh3cIfStatFlowInterval Integer32, hh3cIfStatFlowInBits Unsigned32, hh3cIfStatFlowOutBits Unsigned32, hh3cIfStatFlowInPkts Unsigned32, hh3cIfStatFlowOutPkts Unsigned32, hh3cIfStatFlowInBytes Unsigned32, hh3cIfStatFlowOutBytes Unsigned32 } hh3cIfStatFlowInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0." ::= { hh3cIfFlowStatEntry 1 } hh3cIfStatFlowInBits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In bits in the specific interval." ::= { hh3cIfFlowStatEntry 2 } hh3cIfStatFlowOutBits OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bits in specific interval." ::= { hh3cIfFlowStatEntry 3 } hh3cIfStatFlowInPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In Packets in the specific interval." ::= { hh3cIfFlowStatEntry 4 } hh3cIfStatFlowOutPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out packets in the specific interval." ::= { hh3cIfFlowStatEntry 5 } hh3cIfStatFlowInBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "In bytes in the specific interval." ::= { hh3cIfFlowStatEntry 6 } hh3cIfStatFlowOutBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bytes in the specific interval." ::= { hh3cIfFlowStatEntry 7 } -- ================================================================= hh3cIfSpeedStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfSpeedStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get average speed information in the specific interval of interfaces on a device." ::= { hh3cIfStatTable 2 } hh3cIfSpeedStatEntry OBJECT-TYPE SYNTAX Hh3cIfSpeedStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry items" INDEX { ifIndex } ::= { hh3cIfSpeedStatTable 1 } Hh3cIfSpeedStatEntry ::= SEQUENCE { hh3cIfSpeedStatInterval Integer32, hh3cIfSpeedStatInPkts Unsigned32, hh3cIfSpeedStatOutPkts Unsigned32, hh3cIfSpeedStatInBytes Unsigned32, hh3cIfSpeedStatOutBytes Unsigned32 } hh3cIfSpeedStatInterval OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Sampling interval for in/out flow of interface. Setting zero indicates closing this statistic function and objects in this table should return 0." ::= { hh3cIfSpeedStatEntry 1 } hh3cIfSpeedStatInPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of input packets per second in the specific interval by hh3cIfSpeedStatInterval." ::= { hh3cIfSpeedStatEntry 2 } hh3cIfSpeedStatOutPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of output packets per second in the specific interval by hh3cIfSpeedStatInterval." ::= { hh3cIfSpeedStatEntry 3 } hh3cIfSpeedStatInBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of input bytes per second in the specific interval by hh3cIfSpeedStatInterval." ::= { hh3cIfSpeedStatEntry 4 } hh3cIfSpeedStatOutBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Average of output bytes per second in the specific interval by hh3cIfSpeedStatInterval." ::= { hh3cIfSpeedStatEntry 5 } -- ================================================================= hh3cIfHCFlowStatTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfHCFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get statistic information of interfaces on a device." ::= { hh3cIfStatTable 3 } hh3cIfHCFlowStatEntry OBJECT-TYPE SYNTAX Hh3cIfHCFlowStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry items" INDEX { ifIndex } ::= { hh3cIfHCFlowStatTable 1 } Hh3cIfHCFlowStatEntry ::= SEQUENCE { hh3cIfStatFlowHCInBits CounterBasedGauge64, hh3cIfStatFlowHCOutBits CounterBasedGauge64, hh3cIfStatFlowHCInPkts CounterBasedGauge64, hh3cIfStatFlowHCOutPkts CounterBasedGauge64, hh3cIfStatFlowHCInBytes CounterBasedGauge64, hh3cIfStatFlowHCOutBytes CounterBasedGauge64 } hh3cIfStatFlowHCInBits OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "In bits in the specific interval. This object is a 64-bit version of hh3cIfStatFlowInBits." ::= { hh3cIfHCFlowStatEntry 1 } hh3cIfStatFlowHCOutBits OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bits in specific interval. This object is a 64-bit version of hh3cIfStatFlowOutBits." ::= { hh3cIfHCFlowStatEntry 2 } hh3cIfStatFlowHCInPkts OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "In Packets in the specific interval. This object is a 64-bit version of hh3cIfStatFlowInPkts." ::= { hh3cIfHCFlowStatEntry 3 } hh3cIfStatFlowHCOutPkts OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out packets in the specific interval. This object is a 64-bit version of hh3cIfStatFlowOutPkts." ::= { hh3cIfHCFlowStatEntry 4 } hh3cIfStatFlowHCInBytes OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "In bytes in the specific interval. This object is a 64-bit version of hh3cIfStatFlowInBytes." ::= { hh3cIfHCFlowStatEntry 5 } hh3cIfStatFlowHCOutBytes OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "Out bytes in the specific interval. This object is a 64-bit version of hh3cIfStatFlowOutBytes." ::= { hh3cIfHCFlowStatEntry 6 } -- ================================================================= hh3cIfControl OBJECT IDENTIFIER ::= { hh3cIfExtGroup 2 } hh3cRTParentIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cRTParentIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains all interfaces that can create sub interface." ::= { hh3cIfControl 1 } hh3cRTParentIfEntry OBJECT-TYPE SYNTAX Hh3cRTParentIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry describes a interface that can create sub interface." INDEX { hh3cRTParentIfIndex } ::= { hh3cRTParentIfTable 1} Hh3cRTParentIfEntry ::= SEQUENCE { hh3cRTParentIfIndex Integer32, hh3cRTMinSubIfOrdinal Integer32, hh3cRTMaxSubIfOrdinal Integer32 } hh3cRTParentIfIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of interface that can creat sub interface. The value is the same as ifIndex value for this interface." ::= { hh3cRTParentIfEntry 1 } hh3cRTMinSubIfOrdinal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimum ordinal of the sub interface can be created." ::= { hh3cRTParentIfEntry 2 } hh3cRTMaxSubIfOrdinal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max ordinal of the sub interface can be created." ::= { hh3cRTParentIfEntry 3 } -- ================================================================= hh3cRTSubIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cRTSubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to create or delete sub interfaces. To create a sub interface, a valid parent interface must be specified by hh3cRTSubIfParentIfIndex and the hh3cRTSubIfOrdinal must be in the range between hh3cRTMinSubIfOrdinal and hh3cRTMaxSubIfOrdinal of the parent interface from hh3cRTParentIfTable. Sub interfaces are logical virtual interfaces configured on a main interface. The main interface can be either a physical interface (such as a Layer 3 Ethernet interface) or a logical interface (such as an MFR interface). The subinterfaces on a main interface share the physical layer parameters of the main interface but can have link layer and network layer parameters of their own. Disabling or enabling a subinterface does not affect the main interface, but the main interface status change affects the subinterfaces. The subinterfaces cannot operate normally unless the main interface is connected. A single physical interface containing multiple subinterfaces enables you to network in a more flexible way. You can create subinterfaces for the following physical interfaces: Ethernet interface. An Ethernet subinterface associated with no VLAN supports only IPX, while an Ethernet subinterface associated with a VLAN supports both IP and IPX. WAN interfaces with their data link layer protocols being frame relay, whose subinterfaces support IP and IPX. WAN interfaces with their data link layer protocols being X.25, whose subinterfaces support IP and IPX. ATM interface, whose subinterfaces support only IP." ::= { hh3cIfControl 2 } hh3cRTSubIfEntry OBJECT-TYPE SYNTAX Hh3cRTSubIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The hh3cRTSubIfTable entry items" INDEX { hh3cRTSubIfParentIfIndex, hh3cRTSubIfOrdinal } ::= { hh3cRTSubIfTable 1} Hh3cRTSubIfEntry ::= SEQUENCE { hh3cRTSubIfParentIfIndex Integer32, hh3cRTSubIfOrdinal Integer32, hh3cRTSubIfSubIfIndex Integer32, hh3cRTSubIfSubIfDesc DisplayString, hh3cRTSubIfRowStatus RowStatus } hh3cRTSubIfParentIfIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The parent interface index. The value should be the same as the hh3cRTParentIfIndex." ::= { hh3cRTSubIfEntry 1 } hh3cRTSubIfOrdinal OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ordinal of sub interface. It should between hh3cRTMinSubIfOrdinal and hh3cRTMaxSubIfOrdinal of the parent interface." ::= { hh3cRTSubIfEntry 2 } hh3cRTSubIfSubIfIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex value of the sub interface" ::= { hh3cRTSubIfEntry 3 } hh3cRTSubIfSubIfDesc OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the interface" ::= { hh3cRTSubIfEntry 4 } hh3cRTSubIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status." ::= { hh3cRTSubIfEntry 5 } -- ================================================================= hh3cIfLinkModeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfLinkModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains objects to get or set the link mode of an interface. According to the layer at which the device processes received data packets, Ethernet interfaces can operate in bridge or route mode." ::= { hh3cIfControl 3 } hh3cIfLinkModeEntry OBJECT-TYPE SYNTAX Hh3cIfLinkModeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface link mode table entry" INDEX { hh3cIfLinkModeIndex } ::= { hh3cIfLinkModeTable 1} Hh3cIfLinkModeEntry ::= SEQUENCE { hh3cIfLinkModeIndex Integer32, hh3cIfLinkMode INTEGER, hh3cIfLinkModeSwitchSupport TruthValue } hh3cIfLinkModeIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value is same as ifIndex." ::= { hh3cIfLinkModeEntry 1 } hh3cIfLinkMode OBJECT-TYPE SYNTAX INTEGER { bridgeMode(1), routeMode(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The current link mode of the interface If hh3cIfLinkModeSwitchSupport is true, writing to the object can change the link mode of the interface." ::= { hh3cIfLinkModeEntry 2 } hh3cIfLinkModeSwitchSupport OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the interface supports link mode switching. If this object is true, the interface can operate in either bridge mode or route mode. Otherwise the interfaces can operate only in bridge or route mode." ::= { hh3cIfLinkModeEntry 3 } hh3cIfInterfaces OBJECT IDENTIFIER ::= { hh3cIfExtGroup 3 } hh3cIfPhysicalNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the number of physical interfaces in the device." ::= { hh3cIfInterfaces 1 } hh3cIfTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface entries. The number of entries is given by the value of IfNumber." ::= { hh3cIfInterfaces 2 } hh3cIfEntry OBJECT-TYPE SYNTAX Hh3cIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface." INDEX { ifIndex } ::= { hh3cIfTable 1 } Hh3cIfEntry ::= SEQUENCE { hh3cIfUpDownTimes Integer32, hh3cIfMtu Integer32, hh3cIfBandwidthRate Integer32, hh3cIfDiscardPktRate Integer32, hh3cIfStatusKeepTime TimeTicks, hh3cIfInNUcastPkts Counter64, hh3cIfOutNUcastPkts Counter64, hh3cIfIsPoe TruthValue, hh3cIfOperStatus INTEGER, hh3cIfDownTimes Integer32 } hh3cIfUpDownTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The interface's up/down times, since the device was initialized." ::= { hh3cIfEntry 1 } hh3cIfMtu OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "The size of the largest datagram which can be sent/received on the interface, specified in octets. For interfaces that are used for transmitting network datagram, this is the size of the largest network datagram that can be sent on the interface." ::= { hh3cIfEntry 2 } hh3cIfBandwidthRate OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of the bandwidth for an interface." ::= { hh3cIfEntry 3 } hh3cIfDiscardPktRate OBJECT-TYPE SYNTAX Integer32(0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The rate of the discarded packets for an interface." ::= { hh3cIfEntry 4 } hh3cIfStatusKeepTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time since the interface entered its current operational state." ::= { hh3cIfEntry 5 } hh3cIfInNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-unicast (i.e., subnetwork- broadcast or subnetwork-multicast) packets delivered to a higher-layer protocol." ::= { hh3cIfEntry 6 } hh3cIfOutNUcastPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets that higher-level protocols requested be transmitted to a non- unicast (i.e., a subnetwork-broadcast or subnetwork-multicast) address." ::= { hh3cIfEntry 7 } hh3cIfIsPoe OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Whether the interface supports poe." ::= { hh3cIfEntry 8 } hh3cIfOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), -- ready to forward packets down(2), testing(3), -- in a test mode admindown(4) -- shutdown by administrator } MAX-ACCESS read-only STATUS current DESCRIPTION "Current status of the interface. In testing state, no operational packets can be forwarded. If ifAdminStatus is down, hh3cIfOperStatus should be admindown. If ifAdminStatus is changed to up, hh3cIfOperStatus should change to up if the interface is ready to send and receive network traffic; otherwise, it should stay in down state." ::= { hh3cIfEntry 9 } hh3cIfDownTimes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of times the interface went down, since the device was initialized." ::= { hh3cIfEntry 10 } hh3cIfUsingTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfUsingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing management information applicable to splitting interfaces. To improve port density, reduce costs, and improve network flexibility, a high-bandwidth interface can be split into multiple low-bandwidth breakout interfaces, and the breakout interfaces can be combined into a higher-bandwidth interface. For example, a 40-GE interface can be split into four 10-GE breakout interfaces. After the operation takes effect on a 40-GE interface, the system deletes the 40-GE interface and creates four 10-GE breakout interfaces." ::= { hh3cIfInterfaces 3 } hh3cIfUsingEntry OBJECT-TYPE SYNTAX Hh3cIfUsingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry of hh3cIfUsingTable." INDEX { hh3cIfUsingIndex } ::= { hh3cIfUsingTable 1 } Hh3cIfUsingEntry ::= SEQUENCE { hh3cIfUsingIndex Integer32, hh3cIfUsingSupportType Integer32, hh3cIfUsingType INTEGER, hh3cIfUsingStatus INTEGER } hh3cIfUsingIndex OBJECT-TYPE SYNTAX Integer32(1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index of an interface which can be split into multiple low-bandwidth breakout interfaces or be restored to a high-bandwidth interface." ::= { hh3cIfUsingEntry 1 } hh3cIfUsingSupportType OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the port type which can be split into or restored to. From lowest bit, each bit corresponds to a port type ('10GE', '20GE', '40GE', '100GE'). For example, value 3 means this object can be split into 10GE or 20GE, value 4 means this object can be split into 40GE, or can be restored to 40GE." ::= { hh3cIfUsingEntry 2 } hh3cIfUsingType OBJECT-TYPE SYNTAX INTEGER { noUsing(0), using10GE(1), using20GE(2), using40GE(3), using100GE(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the port type that can be split into or restored to. After this object is set to a none-zero value, the operation returns success in the following cases: 1. The original instance stills exist and is read as a non-zero value. In this case, object hh3cIfUsingStatus change to needReboot(1), which means that you need to reboot the line card (for distributed devices) or device (for centralized devices) where the port is located to make the operation take effect. Set this object to noUsing(0) for cancelling the operation. 2. The operation takes effect immediately. Original instance is deleted and new instance is created while the operation takes effect." ::= { hh3cIfUsingEntry 3 } hh3cIfUsingStatus OBJECT-TYPE SYNTAX INTEGER { noUsing(0), needReboot(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "After object hh3cIfUsingType is set to a none-zero value, if the operation does not takes effect before reboot the line card (for distributed devices) or device (for centralized devices) where the port is located, the value of this object is needReboot(1)." ::= { hh3cIfUsingEntry 4 } -- -- Notification definitions -- -- ================================================================= -- Traps are defined below. hh3cIfExtTrap OBJECT IDENTIFIER ::= { hh3cIfExt 3 } hh3cIfExtTrapPrex OBJECT IDENTIFIER ::= { hh3cIfExtTrap 0 } -- All trap definitions should be placed under this object. hh3cIfBandwidthUsageHigh NOTIFICATION-TYPE OBJECTS { ifDescr, hh3cIfBandwidthRate, hh3cIfBandwidthUpperLimit } STATUS current DESCRIPTION "The notification is generated when the rate of the bandwidth for the interface exceeds the upper limit." ::= { hh3cIfExtTrapPrex 1 } hh3cIfDiscardPktRateHigh NOTIFICATION-TYPE OBJECTS { ifDescr, hh3cIfDiscardPktRate, hh3cIfDiscardPktRateUpperLimit } STATUS current DESCRIPTION "The notification is generated when the rate of the discarded packets for the interface exceeds the upper limit." ::= { hh3cIfExtTrapPrex 2 } hh3cIfDampeningSuppressed NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "The notification is generated when the interface is suppressed via dampening." ::= { hh3cIfExtTrapPrex 3 } hh3cIfDampeningNotSuppressed NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION "The notification is generated when the interface is resumed to not suppressed via dampening." ::= { hh3cIfExtTrapPrex 4 } hh3cIfExtTrapObject OBJECT IDENTIFIER ::= { hh3cIfExtTrap 1 } hh3cIfExtTrapCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cIfExtTrapCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The trap configuration table." ::= { hh3cIfExtTrapObject 1 } hh3cIfExtTrapCfgEntry OBJECT-TYPE SYNTAX Hh3cIfExtTrapCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for this table." INDEX { ifIndex } ::= { hh3cIfExtTrapCfgTable 1 } Hh3cIfExtTrapCfgEntry ::= SEQUENCE { hh3cIfBandwidthUpperLimit Integer32, hh3cIfDiscardPktRateUpperLimit Integer32 } hh3cIfBandwidthUpperLimit OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate of the bandwidth upper limit for an interface." ::= { hh3cIfExtTrapCfgEntry 1 } hh3cIfDiscardPktRateUpperLimit OBJECT-TYPE SYNTAX Integer32(1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "The rate of the discarded packets upper limit for an interface." ::= { hh3cIfExtTrapCfgEntry 2 } END