-- ================================================================= -- Copyright (c) 2004-2014 Hangzhou H3C Tech. Co., Ltd. All rights reserved. -- -- Description: -- Reference: -- Version: V1.5 -- History: -- V1.0 created by liujingya. -- Initial version of the MIB -- V1.1 2008-1-29 Adjusted the structure of some tables by liujingya. -- V1.2 2008-5-19 Added hh3cHPEOCCltAutoUpgrade, hh3cHPEOCCnuAnonymStatus and -- hh3cHPEOCBitPerSymbolTable, modified description of hh3cHPEOCCnuBcastControl -- by liujingya. -- V1.3 2009-2-13 Added hh3cHPEOCOnLineCnuNumber, hh3cHPEOCCpuMacAddress, -- hh3cHPEOCOffLineCnuNumber, hh3cHPEOCDownLoadCNUFWResult, -- hh3cHPEOCCltAutoUpgradeType, hh3cHPEOCServerAddress, hh3cHPEOCServerUser, -- hh3cHPEOCServerPassword and hh3cHPEOCCnuMacLimit by liujingya. -- V1.4 2011-12-28 Added hh3cHPEOCCltLinkState by gaoguangping. -- 2012-03-14 Added hh3cHPEOCCltLoopbackDetect by gaoguangping. -- V1.5 2013-08-20 Added hh3cHPEOCTemplate,hh3cHPEOCCnuAccess by xujun -- 2013-09-16 Added hh3cHPEOCTemplateEnable by xujun -- ================================================================= HH3C-HPEOC-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB ifIndex FROM IF-MIB Integer32, Unsigned32, Counter64, OBJECT-TYPE, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI DisplayString, TruthValue, MacAddress, RowStatus FROM SNMPv2-TC; hh3cHPEOC MODULE-IDENTITY LAST-UPDATED "200708281008Z" ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "SMB EOC Team H3C Technologies Co., Ltd. 310 Liuhe Road, Zhijiang Science Park, Hangzhou, P.R.China http://www.h3c.com Zip:310053." DESCRIPTION " The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification. " ::= { hh3cCommon 84 } -- -- hh3cHPEOCSystem -- hh3cHPEOCSystem OBJECT IDENTIFIER ::= { hh3cHPEOC 1 } hh3cHPEOCCltVlanType OBJECT-TYPE SYNTAX INTEGER { ieee8021q(1), portbased(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode. " ::= { hh3cHPEOCSystem 1 } -- -- hh3cHPEOCCltVlanManTable -- hh3cHPEOCCltVlanManTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCCltVlanManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table implements the management of CLT(Coax Line Terminal) VLAN. " ::= { hh3cHPEOCSystem 2 } hh3cHPEOCCltVlanManEntry OBJECT-TYPE SYNTAX Hh3cHPEOCCltVlanManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCCltVlanManTable. " INDEX { ifIndex } ::= { hh3cHPEOCCltVlanManTable 1 } Hh3cHPEOCCltVlanManEntry ::= SEQUENCE { hh3cHPEOCCltEthPortType INTEGER } hh3cHPEOCCltEthPortType OBJECT-TYPE SYNTAX INTEGER { normal(1), debug(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug. " ::= { hh3cHPEOCCltVlanManEntry 1 } -- -- hh3cHPEOCCltSysManTable -- hh3cHPEOCCltSysManTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCCltSysManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table implements the management of CLT(Coax Line Terminal). " ::= { hh3cHPEOCSystem 3 } hh3cHPEOCCltSysManEntry OBJECT-TYPE SYNTAX Hh3cHPEOCCltSysManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCCltSysManTable. " INDEX { ifIndex } ::= { hh3cHPEOCCltSysManTable 1 } Hh3cHPEOCCltSysManEntry ::= SEQUENCE { hh3cHPEOCCltDescr DisplayString, hh3cHPEOCCltFwVersion DisplayString, hh3cHPEOCCltLinkState INTEGER } hh3cHPEOCCltDescr OBJECT-TYPE SYNTAX DisplayString(SIZE(0..126)) MAX-ACCESS read-write STATUS current DESCRIPTION " Set the description of CLT. " ::= { hh3cHPEOCCltSysManEntry 1 } hh3cHPEOCCltFwVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " EOC firmware version. If the object length is zero, it means the version is unknown. " ::= { hh3cHPEOCCltSysManEntry 2 } hh3cHPEOCCltLinkState OBJECT-TYPE SYNTAX INTEGER { physicaldown(1), linkdown(2), linkup(3), loopback(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's link state. The physicaldown(1) state indicates that the CLT is not powered on. The linkdown(2) state indicates that the CLT is powered on, but registers fail. The linkup(3) state indicates that the CLT is powered on, and registers successful. The loopback(4) state indecates that the CLT is powered on and registers successful, but loopback has detected. " ::= { hh3cHPEOCCltSysManEntry 3 } -- -- hh3cHPEOCCnuSysManTable -- hh3cHPEOCCnuSysManTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCCnuSysManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table implements the management of CNUs. " ::= { hh3cHPEOCSystem 4 } hh3cHPEOCCnuSysManEntry OBJECT-TYPE SYNTAX Hh3cHPEOCCnuSysManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCCnuSysManTable. " INDEX { ifIndex } ::= { hh3cHPEOCCnuSysManTable 1 } Hh3cHPEOCCnuSysManEntry ::= SEQUENCE { hh3cHPEOCCnuBcastControl TruthValue, hh3cHPEOCCnuAnonymStatus TruthValue, hh3cHPEOCCnuMacLimit Unsigned32 } hh3cHPEOCCnuBcastControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. " ::= { hh3cHPEOCCnuSysManEntry 1 } hh3cHPEOCCnuAnonymStatus OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION " Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account. " ::= { hh3cHPEOCCnuSysManEntry 2 } hh3cHPEOCCnuMacLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU. " ::= { hh3cHPEOCCnuSysManEntry 3 } hh3cHPEOCCltAutoUpgrade OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed. " DEFVAL { false } ::= { hh3cHPEOCSystem 5 } hh3cHPEOCOnLineCnuNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of the online CNU(s). " ::= { hh3cHPEOCSystem 6 } hh3cHPEOCCpuMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " EOC CPU's MAC address. " ::= { hh3cHPEOCSystem 7 } hh3cHPEOCOffLineCnuNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of the offline CNU(s). " ::= { hh3cHPEOCSystem 8 } hh3cHPEOCDownLoadCNUFWResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION " Download CNU firmware result. " ::= { hh3cHPEOCSystem 9 } hh3cHPEOCCltAutoUpgradeType OBJECT-TYPE SYNTAX INTEGER { flash(1), ftp(2), tftp(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " Type of auto upgrade status. It depends on hh3cHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. " ::= { hh3cHPEOCSystem 10 } hh3cHPEOCAutoUpObjects OBJECT IDENTIFIER ::= { hh3cHPEOCSystem 11 } hh3cHPEOCServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION " The address of remote host acting as server for operation. The default value is 0.0.0.0 " ::= { hh3cHPEOCAutoUpObjects 1 } hh3cHPEOCServerUser OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters. " ::= { hh3cHPEOCAutoUpObjects 2 } hh3cHPEOCServerPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters. " ::= { hh3cHPEOCAutoUpObjects 3 } hh3cHPEOCCltLoopbackDetect OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Loopback detect Status. true(1) - The loopback detect is enabled. false(0)- The loopback detect is disabled. " ::= { hh3cHPEOCSystem 12 } hh3cHPEOCTemplateEnable OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " Use template for white-list cnu. true(1) - Use template is enabled. false(0)- Use template detect is disabled. " ::= { hh3cHPEOCSystem 13 } -- -- hh3cHPEOCCableInfo -- hh3cHPEOCCableInfo OBJECT IDENTIFIER ::= { hh3cHPEOC 2 } -- -- hh3cHPEOCCableInfoTable -- hh3cHPEOCCableInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCCableInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the primary parameters of the cable information. " ::= { hh3cHPEOCCableInfo 1 } hh3cHPEOCCableInfoEntry OBJECT-TYPE SYNTAX Hh3cHPEOCCableInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCCableInfoTable. " INDEX { ifIndex } ::= { hh3cHPEOCCableInfoTable 1 } Hh3cHPEOCCableInfoEntry ::= SEQUENCE { hh3cHPEOCFECErrors Counter64, hh3cHPEOCAvgBitsPerCarrier Unsigned32, hh3cHPEOCAvgSNRPerCarrier Integer32, hh3cHPEOCAvgInPBCRCErrors Unsigned32, hh3cHPEOCInTotalPkts Counter64, hh3cHPEOCAvgOutPower Integer32, hh3cHPEOCAvgOutPBCRCErrors Unsigned32, hh3cHPEOCOutTotalPkts Counter64 } hh3cHPEOCFECErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend. " ::= { hh3cHPEOCCableInfoEntry 1 } hh3cHPEOCAvgBitsPerCarrier OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's average bits per carrier. " ::= { hh3cHPEOCCableInfoEntry 2 } hh3cHPEOCAvgSNRPerCarrier OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's signal noise ratio(SNR) bits per carrier. " ::= { hh3cHPEOCCableInfoEntry 3 } hh3cHPEOCAvgInPBCRCErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The input PB CRC errors on average. " ::= { hh3cHPEOCCableInfoEntry 4 } hh3cHPEOCInTotalPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The total number of packets(including bad packets) received on this interface. " ::= { hh3cHPEOCCableInfoEntry 5 } hh3cHPEOCAvgOutPower OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's power sent on average, the unit is db. " ::= { hh3cHPEOCCableInfoEntry 6 } hh3cHPEOCAvgOutPBCRCErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average. " ::= { hh3cHPEOCCableInfoEntry 7 } hh3cHPEOCOutTotalPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " The total count of the packets(including bad packets) sent on this interface. " ::= { hh3cHPEOCCableInfoEntry 8 } -- -- hh3cHPEOCBitPerSymbolTable -- hh3cHPEOCBitPerSymbolTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCBitPerSymbolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the bits per symbol parameters of the cable line. " ::= { hh3cHPEOCCableInfo 2 } hh3cHPEOCBitPerSymbolEntry OBJECT-TYPE SYNTAX Hh3cHPEOCBitPerSymbolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCBitPerSymbolTable. " INDEX { ifIndex, hh3cHPEOCBitPerSymbolIndex } ::= { hh3cHPEOCBitPerSymbolTable 1 } Hh3cHPEOCBitPerSymbolEntry ::= SEQUENCE { hh3cHPEOCBitPerSymbolIndex Unsigned32, hh3cHPEOCBitPerSymbol OCTET STRING } hh3cHPEOCBitPerSymbolIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index of the hh3cHPEOCBitPerSymbolTable. " ::= { hh3cHPEOCBitPerSymbolEntry 1 } hh3cHPEOCBitPerSymbol OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " hh3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map. " ::= { hh3cHPEOCBitPerSymbolEntry 2 } -- -- hh3cHPEOCTemplate -- hh3cHPEOCTemplate OBJECT IDENTIFIER ::= { hh3cHPEOC 3 } -- -- hh3cHPEOCTemplateGlobalTable -- hh3cHPEOCTemplateGlobalTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCTemplateGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the global parameters of the Template information. " ::= { hh3cHPEOCTemplate 1 } hh3cHPEOCTemplateGlobalEntry OBJECT-TYPE SYNTAX Hh3cHPEOCTemplateGlobalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCTemplateGlobalTable. " INDEX { hh3cHPEOCTemplateIndex } ::= { hh3cHPEOCTemplateGlobalTable 1 } Hh3cHPEOCTemplateGlobalEntry ::= SEQUENCE { hh3cHPEOCTemplateIndex Integer32, hh3cHPEOCTemplateType Integer32, hh3cHPEOCTemplateName DisplayString, hh3cHPEOCTemplateDescr DisplayString, hh3cHPEOCTemplateCnuMaxDownBW Integer32, hh3cHPEOCTemplateCnuMaxUpBW Integer32, hh3cHPEOCTemplateCnuBcastControl TruthValue, hh3cHPEOCTemplateCnuMacLimit Unsigned32, hh3cHPEOCTemplateCb201VlanEn TruthValue, hh3cHPEOCTemplateRowStatus RowStatus } hh3cHPEOCTemplateIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The index of cable Template. " ::= { hh3cHPEOCTemplateGlobalEntry 1 } hh3cHPEOCTemplateType OBJECT-TYPE SYNTAX Integer32 { switch(1), gateway(2) } MAX-ACCESS read-create STATUS current DESCRIPTION " The cable Template's type, can not change after create it. " ::= { hh3cHPEOCTemplateGlobalEntry 2 } hh3cHPEOCTemplateName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The cable Template's name, it's recommended to set it uniquely and understandably. Length: 1 to 15 characters. " ::= { hh3cHPEOCTemplateGlobalEntry 3 } hh3cHPEOCTemplateDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The cable Template's description. Length: 0 to 63 characters. " ::= { hh3cHPEOCTemplateGlobalEntry 4 } hh3cHPEOCTemplateCnuMaxDownBW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Maximum downstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. " ::= { hh3cHPEOCTemplateGlobalEntry 5 } hh3cHPEOCTemplateCnuMaxUpBW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Maximum upstream bandwidth allowed for the CNU, measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64. " ::= { hh3cHPEOCTemplateGlobalEntry 6 } hh3cHPEOCTemplateCnuBcastControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable. " ::= { hh3cHPEOCTemplateGlobalEntry 7 } hh3cHPEOCTemplateCnuMacLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU. " ::= { hh3cHPEOCTemplateGlobalEntry 8 } hh3cHPEOCTemplateCb201VlanEn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " Use for Cb201 cnu only. true(1) - Enable vlan insert function. false(2) - Disable vlan insert function. " ::= { hh3cHPEOCTemplateGlobalEntry 9 } hh3cHPEOCTemplateRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Operation status. " ::= { hh3cHPEOCTemplateGlobalEntry 10 } -- -- hh3cHPEOCTemplateSwitchTable -- hh3cHPEOCTemplateSwitchTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCTemplateSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the port parameters of the switch type cnu. it's not affect on the type of gateway Template. " ::= { hh3cHPEOCTemplate 2 } hh3cHPEOCTemplateSwitchEntry OBJECT-TYPE SYNTAX Hh3cHPEOCTemplateSwitchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCTemplateSwitchTable. " INDEX { hh3cHPEOCTemplateIndex, hh3cHPEOCTemplateUniIndex } ::= { hh3cHPEOCTemplateSwitchTable 1 } Hh3cHPEOCTemplateSwitchEntry ::= SEQUENCE { hh3cHPEOCTemplateUniIndex Integer32, hh3cHPEOCTemplateUniSpeed INTEGER, hh3cHPEOCTemplateUniDuplex INTEGER, hh3cHPEOCTemplateUniPriority Integer32, hh3cHPEOCTemplateUniFlowControl TruthValue, hh3cHPEOCTemplateUniUpLineRate Unsigned32, hh3cHPEOCTemplateUniDownLineRate Unsigned32, hh3cHPEOCTemplateUniAdminStatus INTEGER, hh3cHPEOCTemplateUniVLANType INTEGER, hh3cHPEOCTemplateUniPvid Integer32, hh3cHPEOCTemplateUniVlanTag INTEGER } hh3cHPEOCTemplateUniIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index value which uniquely identifies the FE interface of the CNU. " ::= { hh3cHPEOCTemplateSwitchEntry 1 } hh3cHPEOCTemplateUniSpeed OBJECT-TYPE SYNTAX INTEGER { auto(1), s10M(10), s100M(100) } MAX-ACCESS read-write STATUS current DESCRIPTION " User network interface speed. " ::= { hh3cHPEOCTemplateSwitchEntry 2 } hh3cHPEOCTemplateUniDuplex OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " User network interface mode. " ::= { hh3cHPEOCTemplateSwitchEntry 3 } hh3cHPEOCTemplateUniPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. " ::= { hh3cHPEOCTemplateSwitchEntry 4 } hh3cHPEOCTemplateUniFlowControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable." DEFVAL { false } ::= { hh3cHPEOCTemplateSwitchEntry 5 } hh3cHPEOCTemplateUniUpLineRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " The max speed upload in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line. " ::= { hh3cHPEOCTemplateSwitchEntry 6 } hh3cHPEOCTemplateUniDownLineRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " The max speed download in units of 1,024 bits per second on this interface. The value should between 0 and 8Mbps. If the value is 0, it means that the download speed is only restricted by the physical line. " ::= { hh3cHPEOCTemplateSwitchEntry 7 } hh3cHPEOCTemplateUniAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard. " ::= { hh3cHPEOCTemplateSwitchEntry 8 } hh3cHPEOCTemplateUniVLANType OBJECT-TYPE SYNTAX INTEGER { access(1), trunk(2), hybrid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "port vlan types. hybrid (3) port can carry multiple VLANs. " ::= { hh3cHPEOCTemplateSwitchEntry 9 } hh3cHPEOCTemplateUniPvid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. " REFERENCE " IEEE 802.1Q/D11 Section 12.10.1.1 " DEFVAL { 1 } ::= { hh3cHPEOCTemplateSwitchEntry 10 } hh3cHPEOCTemplateUniVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN is set tagged or untagged. " ::= { hh3cHPEOCTemplateSwitchEntry 11 } -- -- hh3cHPEOCCnuAccess -- hh3cHPEOCCnuAccess OBJECT IDENTIFIER ::= { hh3cHPEOC 4 } -- -- hh3cHPEOCCnuAccessTable -- hh3cHPEOCCnuAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cHPEOCCnuAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the global parameters of the cnu type permitting to access. " ::= { hh3cHPEOCCnuAccess 1 } hh3cHPEOCCnuAccessEntry OBJECT-TYPE SYNTAX Hh3cHPEOCCnuAccessEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cHPEOCCnuAccessTable. " INDEX { hh3cHPEOCCnuAccessIndex } ::= { hh3cHPEOCCnuAccessTable 1 } Hh3cHPEOCCnuAccessEntry ::= SEQUENCE { hh3cHPEOCCnuAccessIndex Integer32, hh3cHPEOCCnuHFID DisplayString, hh3cHPEOCManuInfo DisplayString, hh3cHPEOCCnuType Integer32, hh3cHPEOCCnuSwitchType Integer32, hh3cHPEOCCnuUniNum Integer32, hh3cHPEOCCnuPhy2Uni OCTET STRING, hh3cHPEOCCnuAccessRowStatus RowStatus } hh3cHPEOCCnuAccessIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION " The index value which uniquely identifies the manuinfo of the CNU. " ::= { hh3cHPEOCCnuAccessEntry 1 } hh3cHPEOCCnuHFID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The Cnu's HFID. Every type Cnu has it's unique HFID. Length: 1 to 64 characters. " ::= { hh3cHPEOCCnuAccessEntry 2 } hh3cHPEOCManuInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The Cnu's manufactory infofamiont. Length: 0 to 63 characters. " ::= { hh3cHPEOCCnuAccessEntry 3 } hh3cHPEOCCnuType OBJECT-TYPE SYNTAX Integer32 { switch(1), gateway(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " The Cnu's function type. " ::= { hh3cHPEOCCnuAccessEntry 4 } hh3cHPEOCCnuSwitchType OBJECT-TYPE SYNTAX Integer32 { rtl8306e(1), ar8236(2), mv6061(3), mv6031(4) } MAX-ACCESS read-write STATUS current DESCRIPTION " The Cnu's switch chip type. It's useless for gataway type cnu. " ::= { hh3cHPEOCCnuAccessEntry 5 } hh3cHPEOCCnuUniNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Uni number of the Cnu. It's useless for gataway type cnu. " ::= { hh3cHPEOCCnuAccessEntry 6 } hh3cHPEOCCnuPhy2Uni OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION " Reflection from phy port to uni port of the cnu. It's useless for gataway type cnu. For example, phy port 0,1,2,3 is reflect to uni port 1,2,3,4, then the value of this mib is {0,1,2,3} " ::= { hh3cHPEOCCnuAccessEntry 7 } hh3cHPEOCCnuAccessRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Operation status. " ::= { hh3cHPEOCCnuAccessEntry 8 } END