-- ================================================================= -- Copyright (c) 2004-2014 by H3C Technologies. All rights reserved. -- -- Description: -- Reference: -- Version: V1.7 -- History: -- V1.0 created by liujingya. -- Initial version of the MIB -- V1.1 2008-1-29 Adjusted the structure of some tables and the value of -- some objects by liujingya. -- V1.2 2008-5-19 Added hh3cEOCComUniAdminStatus, hh3cEOCComCnuSoftwareVersion, -- modified description of hh3cEOCComUniUpLineRate and -- hh3cEOCComUniDownLineRate by liujingya. -- V1.3 2008-7-30 updated by xujun -- add hh3cEOCComCnuRateDropThr, hh3cEOCComCnuTxRate, hh3cEOCComCnuRxRate, -- hh3cEOCComCnuTxRateDrop, hh3cEOCComCnuRxRateDrop, hh3cEOCCnuTxRateDropTrap, -- hh3cEOCCnuTxRateDropRecoverTrap, hh3cEOCCnuRxRateDropTrap and -- hh3cEOCCnuRxRateDropRecoverTrap by xujun -- V1.4 2009-2-13 Added hh3cEOCCnuFWDownLoadErrTrap, -- hh3cEOCCnuFWDownLoadErrReTrap, hh3cEOCCnuDeviceTypeErrTrap, -- hh3cEOCCnuDeviceTypeErrReTrap, hh3cEOCCnuAutoUpdateErrTrap, -- hh3cEOCCnuAutoUpdateSuccTrap and -- modified MAX-ACCESS of hh3cEOCComCnuDeviceType by liujingya. -- V1.5 2010-1-7 Added hh3cEocComCnuTypeIdx, hh3cEOCComCnuDescripton, -- hh3cEOCComCltMaxAllowToAccess, hh3cEocComCnuNumber by xujun -- V1.6 2011-12-28 updated by gaoguangping -- Added hh3cEOCLoopbackDetectTrap, hh3cEOCLoopbackRecoverTrap; -- Modified hh3cEOCComCnuLinkState. -- V1.7 2013-08-20 Added hh3cEOCComCnuTempIndex by xujun -- ================================================================= HH3C-EOC-COMMON-MIB DEFINITIONS ::= BEGIN IMPORTS hh3cCommon FROM HH3C-OID-MIB ifIndex, ifDescr FROM IF-MIB Integer32, Unsigned32, TimeTicks, OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE, Gauge32 FROM SNMPv2-SMI IANAifType FROM IANAifType-MIB MacAddress, RowStatus, DisplayString, TruthValue FROM SNMPv2-TC hh3cHPEOCDownLoadCNUFWResult FROM HH3C-HPEOC-MIB; hh3cEOCCommon MODULE-IDENTITY LAST-UPDATED "200709111008Z" ORGANIZATION "Hangzhou H3C Tech. Co., Ltd." CONTACT-INFO "SMB EOC Team H3C Technologies Co., Ltd. 310 Liuhe Road, Zhijiang Science Park, Hangzhou, P.R.China http://www.h3c.com Zip:310053." DESCRIPTION " The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification. " ::= { hh3cCommon 83 } -- -- hh3cEOCCommonSysMan -- hh3cEOCCommonSysMan OBJECT IDENTIFIER ::= { hh3cEOCCommon 1 } hh3cEOCCommonSysScalarObjects OBJECT IDENTIFIER ::= { hh3cEOCCommonSysMan 1 } hh3cEOCCommonSysVersion OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION " Eoc version. If the object length is zero, it means the version is unknown. The length is up to 1024. " ::= { hh3cEOCCommonSysScalarObjects 1 } hh3cEOCCommonUpLinkMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION " EOC CLT's uplink device's mac address. " ::= { hh3cEOCCommonSysScalarObjects 2 } -- -- hh3cEOCCommonCltMan -- hh3cEOCCommonCltMan OBJECT IDENTIFIER ::= { hh3cEOCCommon 2 } -- -- hh3cEOCCommonCltManTable -- hh3cEOCCommonCltManTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCCommonCltManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the primary parameters of the CLT configuration. " ::= { hh3cEOCCommonCltMan 1 } hh3cEOCCommonCltManEntry OBJECT-TYPE SYNTAX Hh3cEOCCommonCltManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cEOCCommonCltManTable. " INDEX { ifIndex } ::= { hh3cEOCCommonCltManTable 1 } Hh3cEOCCommonCltManEntry ::= SEQUENCE { hh3cEOCCommonCltAutoAuthorize TruthValue, hh3cEOCCommonCltMaxAllowToAccess Integer32 } hh3cEOCCommonCltAutoAuthorize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION " This value determines whether software performs self-authorization for each Cable Network Unit(CNU) registering to the network. Setting it to false means for every CNU registering, software requires external authorization, and until it's done the CNU is not authenticated. True value means software authorizes each CNU registering to the network automatically. " DEFVAL { false } ::= { hh3cEOCCommonCltManEntry 1 } hh3cEOCCommonCltMaxAllowToAccess OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " This value determines how many CNU can be bound in this CLT. If the number of CNU is more than this value , then the rest of CNU should not be allow to access. " DEFVAL { 253 } ::= { hh3cEOCCommonCltManEntry 2 } -- -- hh3cEOCComCnuMan -- hh3cEOCComCnuMan OBJECT IDENTIFIER ::= { hh3cEOCCommon 3 } hh3cEOCComCnuScalarObjects OBJECT IDENTIFIER ::= { hh3cEOCComCnuMan 1 } hh3cEOCComCnuMaxDownBWMinVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The lower limit of total-bandwidth which is confined to hh3cEOCComCnuMaxDownBW." ::= { hh3cEOCComCnuScalarObjects 1 } hh3cEOCComCnuMaxDownBWMaxVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The upper limit of total-bandwidth which is confined to hh3cEOCComCnuMaxDownBW." ::= { hh3cEOCComCnuScalarObjects 2 } hh3cEOCComCnuSlaHighPriBWMinVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The lower limit of high priority bandwidth which is confined to hh3cEOCComCnuSlaHighPriBW." ::= { hh3cEOCComCnuScalarObjects 3 } hh3cEOCComCnuSlaHighPriBWMaxVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The upper limit of high priority bandwidth which is confined to hh3cEOCComCnuSlaHighPriBW." ::= { hh3cEOCComCnuScalarObjects 4 } hh3cEOCComCnuMaxUpBWMinVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The lower limit of total-bandwidth which is confined to hh3cEOCComCnuMaxUpBW." ::= { hh3cEOCComCnuScalarObjects 5 } hh3cEOCComCnuMaxUpBWMaxVal OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The upper limit of total-bandwidth which is confined to hh3cEOCComCnuMaxUpBW." ::= { hh3cEOCComCnuScalarObjects 6 } hh3cEOCComCnuAttenThrA OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The value of cnu's average attenuation good level thresholds. " ::= { hh3cEOCComCnuScalarObjects 7 } hh3cEOCComCnuAttenThrB OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The value of cnu's average attenuation normal level thresholds. " ::= { hh3cEOCComCnuScalarObjects 8 } hh3cEOCComCnuRateDropThr OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " The value of cnu's Tx/Rx rate drop thresholds. " ::= { hh3cEOCComCnuScalarObjects 9 } -- -- hh3cEOCComCnuSysManTable -- hh3cEOCComCnuSysManTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComCnuSysManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table implements the management of CNUs(Coax Network Unit). " ::= { hh3cEOCComCnuMan 2 } hh3cEOCComCnuSysManEntry OBJECT-TYPE SYNTAX Hh3cEOCComCnuSysManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cEOCComCnuSysManTable. " INDEX { ifIndex } ::= { hh3cEOCComCnuSysManTable 1 } Hh3cEOCComCnuSysManEntry ::= SEQUENCE { hh3cEOCComCnuCableIfindex Integer32, hh3cEOCComCnuDeviceType DisplayString, hh3cEOCComCnuDeviceAlias DisplayString, hh3cEOCComCnuDescr DisplayString, hh3cEOCComCnuUpTime TimeTicks, hh3cEOCComCnuVLANType INTEGER, hh3cEOCComCnuPvid Integer32, hh3cEOCComCnuVlanTag INTEGER, hh3cEOCComCnuReset INTEGER, hh3cEOCComCnuDeregister INTEGER, hh3cEOCComCnuSave INTEGER, hh3cEOCComCnuAccess INTEGER } hh3cEOCComCnuCableIfindex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The index of cable port which uniquely identifies the cable port of one device. " ::= { hh3cEOCComCnuSysManEntry 1 } hh3cEOCComCnuDeviceType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " The type of the EOC CNU(Coax Network Unit). " ::= { hh3cEOCComCnuSysManEntry 2 } hh3cEOCComCnuDeviceAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " EOC CNU's alias which display as the device's name, it's recommended to set it uniquely and understandably. " ::= { hh3cEOCComCnuSysManEntry 3 } hh3cEOCComCnuDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " User's description, including user's address, name, telephone number and so on. " ::= { hh3cEOCComCnuSysManEntry 4 } hh3cEOCComCnuUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION " The time since the CNU last registered to the network. " ::= { hh3cEOCComCnuSysManEntry 5 } hh3cEOCComCnuVLANType OBJECT-TYPE SYNTAX INTEGER { vLANTrunk(1), access(2), hybrid(3), fabric(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port." ::= { hh3cEOCComCnuSysManEntry 6 } hh3cEOCComCnuPvid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on cable interface. " REFERENCE " IEEE 802.1Q/D11 Section 12.10.1.1 " DEFVAL { 1 } ::= { hh3cEOCComCnuSysManEntry 7 } hh3cEOCComCnuVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN is set tagged or untagged on cable interface. " ::= { hh3cEOCComCnuSysManEntry 8 } hh3cEOCComCnuReset OBJECT-TYPE SYNTAX INTEGER { running(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This variable is used to reset the CNU device. The interface may be unavailable while the reset occurs and data may be lost. During reading operation it returns the state of the CNU device. running(1) indicates and operates normal operation, reset(2) indicates and operates reset mode. Writing can be done all the time. " ::= { hh3cEOCComCnuSysManEntry 9 } hh3cEOCComCnuDeregister OBJECT-TYPE SYNTAX INTEGER { deregister(1) } MAX-ACCESS read-write STATUS current DESCRIPTION " deregister CNU. " ::= { hh3cEOCComCnuSysManEntry 10 } hh3cEOCComCnuSave OBJECT-TYPE SYNTAX INTEGER { save(1), running(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Save the UNI and CNU related configurations to the CNU. " ::= { hh3cEOCComCnuSysManEntry 11 } hh3cEOCComCnuAccess OBJECT-TYPE SYNTAX INTEGER { access(1), notaccess(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Control whether the user can access to the network. " ::= { hh3cEOCComCnuSysManEntry 12 } -- -- hh3cEOCComCnuMacTable -- hh3cEOCComCnuMacTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComCnuMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table implements the management of CNUs. " ::= { hh3cEOCComCnuMan 3 } hh3cEOCComCnuMacEntry OBJECT-TYPE SYNTAX Hh3cEOCComCnuMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cEOCComCnuMacTable. " INDEX { ifIndex } ::= { hh3cEOCComCnuMacTable 1 } Hh3cEOCComCnuMacEntry ::= SEQUENCE { hh3cEOCComCnuMacAddress MacAddress, hh3cEOCComCnuRowStatus RowStatus, hh3cEOCComCnuTempIndex Integer32 } hh3cEOCComCnuMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION " EOC CNU's MAC address. " ::= { hh3cEOCComCnuMacEntry 1 } hh3cEOCComCnuRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION " Operation status. " ::= { hh3cEOCComCnuMacEntry 2 } hh3cEOCComCnuTempIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " EOC CNU's model index from hh3cHPEOCTemplateIndex, If configure 0, the CNU select no model. " ::= { hh3cEOCComCnuMacEntry 3 } -- -- hh3cEOCComCnuInfoTable -- hh3cEOCComCnuInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComCnuInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Primary status of the specified CNU. There will be one row in this table for each information in the system. " ::= { hh3cEOCComCnuMan 4 } hh3cEOCComCnuInfoEntry OBJECT-TYPE SYNTAX Hh3cEOCComCnuInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the hh3cEOCComCnuInfoTable. " INDEX { ifIndex } ::= { hh3cEOCComCnuInfoTable 1 } Hh3cEOCComCnuInfoEntry ::= SEQUENCE { hh3cEOCComCnuHardwareVersion DisplayString, hh3cEOCComCnuPCBVersion OCTET STRING, hh3cEOCComCnuLinkState INTEGER, hh3cEOCComCnuAttenuation Integer32, hh3cEOCComCnuSoftwareVersion DisplayString, hh3cEOCComCnuTxRate Integer32, hh3cEOCComCnuRxRate Integer32, hh3cEOCComCnuTxRateDrop Integer32, hh3cEOCComCnuRxRateDrop Integer32 } hh3cEOCComCnuHardwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " EOC CNU's hardware version. If the object length is zero, it means the version is unknown. " ::= { hh3cEOCComCnuInfoEntry 1 } hh3cEOCComCnuPCBVersion OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION " EOC CNU's PCB version. " ::= { hh3cEOCComCnuInfoEntry 2 } hh3cEOCComCnuLinkState OBJECT-TYPE SYNTAX INTEGER { physicaldown(1), linkdown(2), linkup(3), loopback(4) } MAX-ACCESS read-only STATUS current DESCRIPTION " The cable port's link state. The physicaldown(1) state indicates that the CNU is not powered on. The linkdown(2) state indicates that the CNU is powered on, but registers fail. The linkup(3) state indicates that the CNU is powered on, and registers successful. The loopback(4) state indecates that the CNU is powered on and registers successful, but loopback has detected. " ::= { hh3cEOCComCnuInfoEntry 3 } hh3cEOCComCnuAttenuation OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cnu's average attenuation. " ::= { hh3cEOCComCnuInfoEntry 4 } hh3cEOCComCnuSoftwareVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " EOC CNU's software version. If the object length is zero, it means the version is unknown. " ::= { hh3cEOCComCnuInfoEntry 5 } hh3cEOCComCnuTxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cnu's capability of tx speed in unit of 1Mbps. " ::= { hh3cEOCComCnuInfoEntry 6 } hh3cEOCComCnuRxRate OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cnu's capability of rx speed in unit of 1Mbps. " ::= { hh3cEOCComCnuInfoEntry 7 } hh3cEOCComCnuTxRateDrop OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cnu's capability droping of tx speed from it's history max value in unit of %. " ::= { hh3cEOCComCnuInfoEntry 8 } hh3cEOCComCnuRxRateDrop OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The cnu's capability droping of rx speed from it's history max value in unit of %. " ::= { hh3cEOCComCnuInfoEntry 9 } -- -- hh3cEOCComCnuBandWidthTable -- hh3cEOCComCnuBandWidthTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComCnuBandWidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " Set bandwidth parameters. " ::= { hh3cEOCComCnuMan 5 } hh3cEOCComCnuBandWidthEntry OBJECT-TYPE SYNTAX Hh3cEOCComCnuBandWidthEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of table hh3cEOCComCnuBandWidthTable. It is a pre-configuration. " INDEX { ifIndex } ::= { hh3cEOCComCnuBandWidthTable 1 } Hh3cEOCComCnuBandWidthEntry ::= SEQUENCE { hh3cEOCComCnuMaxDownBW Integer32, hh3cEOCComCnuSlaHighPriBW Integer32, hh3cEOCComCnuMaxUpBW Integer32 } hh3cEOCComCnuMaxDownBW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Maximum bandwidth allowed for the CNU, measured in Kbit/s. " ::= { hh3cEOCComCnuBandWidthEntry 1 } hh3cEOCComCnuSlaHighPriBW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " High priority bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cEOCComCnuMaxUpBW. The high priority bandwidth should not be larger than the maximum bandwidth. " ::= { hh3cEOCComCnuBandWidthEntry 2 } hh3cEOCComCnuMaxUpBW OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION " Total bandwidth - measured in Kbit/s. The value of this object should be the multiple of the value of hh3cEOCComCnuSlaHighPriBW. The total bandwidth should be larger than the high priority bandwidth. " ::= { hh3cEOCComCnuBandWidthEntry 3 } -- -- hh3cEOCComUniMan -- hh3cEOCComUniMan OBJECT IDENTIFIER ::= { hh3cEOCCommon 4 } hh3cEOCComUniManTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComUniManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines several user network interface(UNI) system parameters. " ::= { hh3cEOCComUniMan 1 } hh3cEOCComUniManEntry OBJECT-TYPE SYNTAX Hh3cEOCComUniManEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of hh3cEOCComUniManTable. " INDEX { ifIndex, hh3cEOCUniIndex } ::= { hh3cEOCComUniManTable 1 } Hh3cEOCComUniManEntry ::= SEQUENCE { hh3cEOCUniIndex Unsigned32, hh3cEOCComUniDescr DisplayString, hh3cEOCComUniStatus INTEGER, hh3cEOCComUniSpeed INTEGER, hh3cEOCComUniDuplex INTEGER, hh3cEOCComUniCurrentSpeed Gauge32, hh3cEOCComUniCurrentDuplex INTEGER, hh3cEOCComUniMdi INTEGER, hh3cEOCComUniFlowControl TruthValue, hh3cEOCComUniCountReset INTEGER, hh3cEOCComUniAlias DisplayString, hh3cEOCComUniType IANAifType, hh3cEOCComUniVLANType INTEGER, hh3cEOCComUniPvid Integer32, hh3cEOCComUniVlanTag INTEGER, hh3cEOCComUniPriority Integer32, hh3cEOCComUniUpLineRate Unsigned32, hh3cEOCComUniDownLineRate Unsigned32, hh3cEOCComUniAdminStatus INTEGER } hh3cEOCUniIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " The index value which uniquely identifies the FE(Fast Ethernet) interface of the CNU. " ::= { hh3cEOCComUniManEntry 1 } hh3cEOCComUniDescr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " A textual string containing information about the interface. This string should include the name of the manufacturer, the product name and the version of the interface hardware and software. " ::= { hh3cEOCComUniManEntry 2 } hh3cEOCComUniStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " The desired state of the user network interface. When a managed system initializes, all user network interfaces start with down state. The testing state indicates that no operational packets can be passed. As a result of either explicit management action or per configuration information retained by the managed system, hh3cEOCComUniStatus is then changed to either the up or testing states (or remains in the down state). " ::= { hh3cEOCComUniManEntry 3 } hh3cEOCComUniSpeed OBJECT-TYPE SYNTAX INTEGER { auto(1), s10M(10), s100M(100) } MAX-ACCESS read-write STATUS current DESCRIPTION " User network interface speed. " ::= { hh3cEOCComUniManEntry 4 } hh3cEOCComUniDuplex OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION " User network interface mode. " ::= { hh3cEOCComUniManEntry 5 } hh3cEOCComUniCurrentSpeed OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION " An estimate of the interface's current bandwidth in bits per second. For interfaces which do not vary in bandwidth or for those where no accurate estimation can be made, this object should contain the nominal bandwidth. If the bandwidth of the interface is greater than the maximum value reportable by this object then this object should report its maximum value (4,294,967,295). For a sub-layer which has no concept of bandwidth, this object should be zero. " ::= { hh3cEOCComUniManEntry 6 } hh3cEOCComUniCurrentDuplex OBJECT-TYPE SYNTAX INTEGER { full(1), half(2), unknown(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " The current mode of operation of the MAC entity. 'unknown' indicates that the current duplex mode could not be determined. Management control of the duplex mode is accomplished through the MAU MIB. When an interface does not support autonegotiation, or when autonegotiation is not enabled, the duplex mode is controlled using ifMauDefaultType. When autonegotiation is supported and enabled, duplex mode is controlled using ifMauAutoNegAdvertisedBits. In either case, the currently operating duplex mode is reflected both in this object and in ifMauType. Note that this object provides redundant information with ifMauType. Normally, redundant objects are discouraged. However, in this instance, it allows a management application to determine the duplex status of an interface without having to know every possible value of ifMauType. This was felt to be sufficiently valuable to justify the redundancy. " REFERENCE " [IEEE 802.3 Std.], 30.3.1.1.32, aDuplexStatus. " ::= { hh3cEOCComUniManEntry 7 } hh3cEOCComUniMdi OBJECT-TYPE SYNTAX INTEGER { mdi-ii(1), mdi-x(2), mdi-auto(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Type of the line connected to UNI interface: mdi-ii(straight-through cable), mdi-x (crossover cable), mdi-auto (auto-sensing)." DEFVAL { mdi-auto } ::= { hh3cEOCComUniManEntry 8 } hh3cEOCComUniFlowControl OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Flow control status. true(1) - Flow control status enable. false(2) - Flow control status disable." DEFVAL { false } ::= { hh3cEOCComUniManEntry 9 } hh3cEOCComUniCountReset OBJECT-TYPE SYNTAX INTEGER { reset(1) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reset the counter which is about packets of the interface, then the counter will change to zero. There is no sense in reading this object." ::= { hh3cEOCComUniManEntry 10 } hh3cEOCComUniAlias OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION " This object is an 'alias' name for the interface as specified by a network manager, and provides a non- volatile 'handle' for the interface. On the first instantiation of an interface, the value of hh3cEOCComUniAlias associated with that interface is the zero-length string. As and when a value is written into an instance of hh3cEOCComUniAlias through a network management set operation, then the agent must retain the supplied value in the hh3cEOCComUniAlias instance associated with the same interface for as long as that interface remains instantiated, including across all re- initializations/reboots of the network management system, including those which result in a change of the interface's ifIndex and hh3cEOCUniIndex value. An example of the value which a network manager might store in this object for a WAN interface is the (Telco's) circuit number/identifier of the interface. Some agents may support write-access only for interfaces having particular values of hh3cEOCComUniType. An agent which supports write access to this object is required to keep the value in non-volatile storage, but it may limit the length of new values depending on how much storage is already occupied by the current values for other interfaces. " ::= { hh3cEOCComUniManEntry 11 } hh3cEOCComUniType OBJECT-TYPE SYNTAX IANAifType MAX-ACCESS read-only STATUS current DESCRIPTION " The type of interface. Additional values for hh3cEOCComUniType are assigned by the Internet Assigned Numbers Authority(IANA), through updating the syntax of the IANAifType textual convention. " ::= { hh3cEOCComUniManEntry 12 } hh3cEOCComUniVLANType OBJECT-TYPE SYNTAX INTEGER { vLANTrunk(1), access(2), hybrid(3), fabric(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "port vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port." ::= { hh3cEOCComUniManEntry 13 } hh3cEOCComUniPvid OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-write STATUS current DESCRIPTION " The PVID, the VLAN ID assigned to untagged frames or Priority-Tagged frames received on this port. " REFERENCE " IEEE 802.1Q/D11 Section 12.10.1.1 " DEFVAL { 1 } ::= { hh3cEOCComUniManEntry 14 } hh3cEOCComUniVlanTag OBJECT-TYPE SYNTAX INTEGER { tagged(1), untagged(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " VLAN is set tagged or untagged. " ::= { hh3cEOCComUniManEntry 15 } hh3cEOCComUniPriority OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION " The default ingress User Priority for this port. This only has effect on media, such as Ethernet, that do not support native User Priority. " ::= { hh3cEOCComUniManEntry 16 } hh3cEOCComUniUpLineRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " The max speed upload in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the upload speed is only restricted by the physical line. " ::= { hh3cEOCComUniManEntry 17 } hh3cEOCComUniDownLineRate OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION " The max speed download in units of 1,000 bits per second on this interface. The value should between 0 and 100Mbps. If the value is 0, it means that the download speed is only restricted by the physical line. " ::= { hh3cEOCComUniManEntry 18 } hh3cEOCComUniAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Control if open or close the UNI. If choose up(1), means the UNI is opened and packets can pass it. If choose down(2), means the UNI is closed and all packets will be discard. " ::= { hh3cEOCComUniManEntry 19 } -- -- hh3cEOCComUniCountTable -- hh3cEOCComUniCountTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComUniCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of interface counter about frames entries." ::= { hh3cEOCComUniMan 2 } hh3cEOCComUniCountEntry OBJECT-TYPE SYNTAX Hh3cEOCComUniCountEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing management information applicable to a particular interface." INDEX { ifIndex, hh3cEOCUniIndex } ::= { hh3cEOCComUniCountTable 1 } Hh3cEOCComUniCountEntry ::= SEQUENCE { hh3cEOCUniInPkts Unsigned32, hh3cEOCUniInUPkts Unsigned32, hh3cEOCUniInBPkts Unsigned32, hh3cEOCUniInMPkts Unsigned32, hh3cEOCUniInPausePkts Unsigned32, hh3cEOCUniInTotalErrors Unsigned32, hh3cEOCUniInCRCErrs Unsigned32, hh3cEOCUniInUndersizePkts Unsigned32, hh3cEOCUniInOversizePkts Unsigned32, hh3cEOCUniInErrorbyOther Unsigned32, hh3cEOCUniInOctets Unsigned32, hh3cEOCUniOutPkts Unsigned32, hh3cEOCUniOutUPkts Unsigned32, hh3cEOCUniOutBPkts Unsigned32, hh3cEOCUniOutMPkts Unsigned32, hh3cEOCUniOutPausePkts Unsigned32, hh3cEOCUniOutTotalErrors Unsigned32, hh3cEOCUniOutCollisions Unsigned32, hh3cEOCUniOutDelayExceedDsds Unsigned32, hh3cEOCUniOutErrorbyOther Unsigned32, hh3cEOCUniOutDroppedFrames Unsigned32, hh3cEOCUniOutOctets Unsigned32 } hh3cEOCUniInPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) received." ::= { hh3cEOCComUniCountEntry 1 } hh3cEOCUniInUPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets received that are directed to the unicast address. Note that this does not include multicast and broadcast packets." ::= { hh3cEOCComUniCountEntry 2 } hh3cEOCUniInBPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets received that are directed to the broadcast address. Note that this does not include multicast packets." ::= { hh3cEOCComUniCountEntry 3 } hh3cEOCUniInMPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets received that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address." ::= { hh3cEOCComUniCountEntry 4 } hh3cEOCUniInPausePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A count of MAC Control packets received on this interface by the pause(flow control) operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system." ::= { hh3cEOCComUniCountEntry 5 } hh3cEOCUniInTotalErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total count of the error packets received on this interface." ::= { hh3cEOCComUniCountEntry 6 } hh3cEOCUniInCRCErrs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had either a bad Frame Check Sequence (FCS) with an integral number of octets (FCS Error) or a bad FCS with a non-integral number of octets (Alignment Error)." ::= { hh3cEOCComUniCountEntry 7 } hh3cEOCUniInUndersizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that are less than 64 octets long (excluding framing bits, but including FCS octets) and are otherwise well formed." ::= { hh3cEOCComUniCountEntry 8 } hh3cEOCUniInOversizePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received that are longer than 1518 octets (excluding framing bits, but including FCS octets) and are otherwise well formed." ::= { hh3cEOCComUniCountEntry 9 } hh3cEOCUniInErrorbyOther OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of other error packets received on this interface." ::= { hh3cEOCComUniCountEntry 10 } hh3cEOCUniInOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on this interface." ::= { hh3cEOCComUniCountEntry 11 } hh3cEOCUniOutPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets (including bad packets, broadcast packets, and multicast packets) sent." ::= { hh3cEOCComUniCountEntry 12 } hh3cEOCUniOutUPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets sent that are directed to the unicast address. Note that this does not include multicast and broadcast packets." ::= { hh3cEOCComUniCountEntry 13 } hh3cEOCUniOutBPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets sent that are directed to the broadcast address. Note that this does not include multicast packets." ::= { hh3cEOCComUniCountEntry 14 } hh3cEOCUniOutMPkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of good packets sent that are directed to a multicast address. Note that this number does not include packets directed to the broadcast address." ::= { hh3cEOCComUniCountEntry 15 } hh3cEOCUniOutPausePkts OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MAC control packets sent on this interface by the pause operation. This counter does not increment when the interface is in a half-duplex mode. Discontinuities in the value of this counter can occur at re-initialization of the management system." ::= { hh3cEOCComUniCountEntry 16 } hh3cEOCUniOutTotalErrors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of error packets sent on this interface." ::= { hh3cEOCComUniCountEntry 17 } hh3cEOCUniOutCollisions OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The best estimate of the total number of collisions on this Ethernet segment. The value returned will depend on the location of the RMON probe. Section 8.2.1.3 (10BASE-5) and section 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a station must detect a collision, in the receive mode, if three or more stations are transmitting simultaneously. A repeater port must detect a collision when two or more stations are transmitting simultaneously. Thus a probe placed on a repeater port could record more collisions than a probe connected to a station on the same segment could. Probe location plays a much smaller role when considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3 defines a collision as the simultaneous presence of signals on the DO and RD circuits (transmitting and receiving at the same time). A 10BASE-T station can only detect collisions when it is transmitting. Thus probes placed on a station and a repeater, should report the same number of collisions. Note also that an RMON probe inside a repeater should ideally report collisions between the repeater and one or more other hosts (transmit collisions as defined by IEEE 802.3k) plus receiver collisions observed on any coax segments to which the repeater is connected." ::= { hh3cEOCComUniCountEntry 18 } hh3cEOCUniOutDelayExceedDsds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets discarded by this port due to excessive transit delay through the bridge. It is incremented by both transparent and source route bridges." ::= { hh3cEOCComUniCountEntry 19 } hh3cEOCUniOutErrorbyOther OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of other error packets sent on this interface. Other error packets means the error packets out of collision packets and excessive delayed packets." ::= { hh3cEOCComUniCountEntry 20 } hh3cEOCUniOutDroppedFrames OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of frames dropped because of buffer failure." ::= { hh3cEOCComUniCountEntry 21 } hh3cEOCUniOutOctets OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted out of the interface." ::= { hh3cEOCComUniCountEntry 22 } -- -- hh3cEOCCommon NOTIFICATION -- hh3cEOCCommonTrap OBJECT IDENTIFIER ::= { hh3cEOCCommon 5 } hh3cEOCTrapPrefix OBJECT IDENTIFIER ::= {hh3cEOCCommonTrap 0} hh3cEOCCnuRegExcessTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCnuRegExcessTrap notification is sent when the number of registered CNUs exceeds the limit. " ::= { hh3cEOCTrapPrefix 1 } hh3cEOCCnuRegExcessRecoverTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCnuRegExcessRecoverTrap notification is sent when hh3cEOCCnuRegExcessTrap is detected and then recoverd. " ::= { hh3cEOCTrapPrefix 2 } hh3cEOCCnuRegSuccTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCnuRegSuccTrap notification is sent when a CNU registers successful. " ::= { hh3cEOCTrapPrefix 3 } hh3cEOCCnuOffLineTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCnuOffLineTrap notification is sent when a CNU offline. " ::= { hh3cEOCTrapPrefix 4 } hh3cEOCCnuLinkupTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCnuLinkupTrap notification is sent when a CNU linkup. " ::= { hh3cEOCTrapPrefix 5 } hh3cEOCOamDisconnectTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCOamDisconnectionTrap notification is sent when LLID's OAM link is disconnected. " ::= { hh3cEOCTrapPrefix 6 } hh3cEOCOamDisconnectRecoverTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCOamDisconnectionRecoverTrap notification is sent when LLID's OAM link is disconnected and then connected. " ::= { hh3cEOCTrapPrefix 7 } hh3cEOCBandwidthNotEnoughTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " Bandwidth is not enough, cnu can not bind now. " ::= { hh3cEOCTrapPrefix 8 } hh3cEOCCnuAttenuationTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress, hh3cEOCComCnuAttenuation } STATUS current DESCRIPTION " A hh3cHPEOCCnuAttenuationTrap notification is sent when a CNU's attenuation is changing. " ::= { hh3cEOCTrapPrefix 9 } hh3cEOCCnuRegFailTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCnuRegFailTrap notification is sent when a CNU registers fail. " ::= { hh3cEOCTrapPrefix 10 } hh3cEOCCLTCablePortErrorTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCLTCablePortErrorTrap notification is sent when the hardware of cable port occurs error or CLT's vlan is configged error. " ::= { hh3cEOCTrapPrefix 11 } hh3cEOCCLTCablePortErrReTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr } STATUS current DESCRIPTION " A hh3cEOCCLTCablePortErrReTrap notification is sent when cable port error and then recovered. " ::= { hh3cEOCTrapPrefix 12 } hh3cEOCCnuTxRateDropTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress, hh3cEOCComCnuTxRateDrop } STATUS current DESCRIPTION " A hh3cEOCCnuTxRateDropTrap notification is sent when cable port rate of TX capability drop exceeded threshold. " ::= { hh3cEOCTrapPrefix 13 } hh3cEOCCnuTxRateDropRecoverTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress, hh3cEOCComCnuTxRateDrop } STATUS current DESCRIPTION " A hh3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port rate of TX capability recover from the recent rate-drop trap. " ::= { hh3cEOCTrapPrefix 14 } hh3cEOCCnuRxRateDropTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress, hh3cEOCComCnuRxRateDrop } STATUS current DESCRIPTION " A hh3cEOCCnuRxRateDropTrap notification is sent when cable port rate of RX capability drop exceeded threshold. " ::= { hh3cEOCTrapPrefix 15 } hh3cEOCCnuRxRateDropRecoverTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress, hh3cEOCComCnuRxRateDrop } STATUS current DESCRIPTION " A hh3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port rate of RX capability recover from the recent rate-drop trap. " ::= { hh3cEOCTrapPrefix 16 } hh3cEOCCnuFWDownLoadErrTrap NOTIFICATION-TYPE OBJECTS { hh3cHPEOCDownLoadCNUFWResult } STATUS current DESCRIPTION " A hh3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't download CNU firmware from the server successfully. " ::= { hh3cEOCTrapPrefix 17 } hh3cEOCCnuFWDownLoadErrReTrap NOTIFICATION-TYPE STATUS current DESCRIPTION " A hh3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover from the download CNU firmware error. " ::= { hh3cEOCTrapPrefix 18 } hh3cEOCCnuDeviceTypeErrTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress, hh3cEOCComCnuDeviceType } STATUS current DESCRIPTION " A hh3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU doesn't match the type which user defined earlier. " ::= { hh3cEOCTrapPrefix 19 } hh3cEOCCnuDeviceTypeErrReTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress } STATUS current DESCRIPTION " A hh3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU doesn't match the type which user defined earlier and then recover. " ::= { hh3cEOCTrapPrefix 20 } hh3cEOCCnuAutoUpdateErrTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress } STATUS current DESCRIPTION " A hh3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU doesn't auto update successfully. " ::= { hh3cEOCTrapPrefix 21 } hh3cEOCCnuAutoUpdateSuccTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress } STATUS current DESCRIPTION " A hh3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU auto update successfully. " ::= { hh3cEOCTrapPrefix 22 } hh3cEOCLoopbackDetectTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress } STATUS current DESCRIPTION " A hh3cEOCLoopbackDetectTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is found. " ::= { hh3cEOCTrapPrefix 23 } hh3cEOCLoopbackRecoverTrap NOTIFICATION-TYPE OBJECTS { ifIndex, ifDescr, hh3cEOCComCnuMacAddress } STATUS current DESCRIPTION " A hh3cEOCLoopbackRecoverTrap notification is sent when the loopback between the ethernet ports of CNU or CLT is recover. " ::= { hh3cEOCTrapPrefix 24 } -- -- hh3cEOCComOnLineCnuMan -- hh3cEOCComOnLineCnuMan OBJECT IDENTIFIER ::= { hh3cEOCCommon 6 } -- -- hh3cEOCComCnuTypeTable -- hh3cEOCComCnuTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComCnuTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the description of cnu typ. " ::= { hh3cEOCComOnLineCnuMan 1 } hh3cEOCComCnuTypeEntry OBJECT-TYPE SYNTAX Hh3cEOCComCnuTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cEOCComCnuTypeTable. " INDEX { hh3cEOCComCnuTypeIdx } ::= { hh3cEOCComCnuTypeTable 1 } Hh3cEOCComCnuTypeEntry ::= SEQUENCE { hh3cEOCComCnuTypeIdx Unsigned32, hh3cEOCComCnuDescripton DisplayString } hh3cEOCComCnuTypeIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION " A unique value for each cnu types. Its value ranges between 1 and the value of cny typess. " ::= { hh3cEOCComCnuTypeEntry 1 } hh3cEOCComCnuDescripton OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " The description for unique cnu types. " ::= { hh3cEOCComCnuTypeEntry 2 } -- -- hh3cEOCComCnuNumTable -- hh3cEOCComCnuNumTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cEOCComCnuNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " This table defines the number of cnu registered in variable types of the CLT . " ::= { hh3cEOCComOnLineCnuMan 2 } hh3cEOCComCnuNumEntry OBJECT-TYPE SYNTAX Hh3cEOCComCnuNumEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry of the table hh3cEOCComCnuNumTable. " INDEX { ifIndex, hh3cEOCComCnuTypeIdx } ::= { hh3cEOCComCnuNumTable 1 } Hh3cEOCComCnuNumEntry ::= SEQUENCE { hh3cEOCComCnuNumber Integer32 } hh3cEOCComCnuNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION " The number of special type of cnu that has been registerd in clt. " ::= { hh3cEOCComCnuNumEntry 1 } END