-- ===================================================================== -- Copyright (c) 2004-2010 by Hangzhou H3C Technologies. All rights reserved. -- -- Description: The file defines a MIB to provide WLAN roaming configuration. -- Reference: -- Version: V1.2 -- History: -- V1.0 2008-7-23 created by heziqi -- V1.1 2009-05-07 modified by Li Yugang -- Add hh3cDot11RoamStatisGroup to hh3cDot11ROAM. -- V1.2 2009-12-24 modified for Guangdong Mobile -- Add hh3cDot11InterACRoamOutSuccCnt to hh3cDot11RoamStatisGroup. -- 2010-08-04 modefied by l07769 for Guangdong CMCC -- Add hh3cDot11IntraACRoamingSuccCnt2, hh3cDot11InterACRoamingSuccCnt2 -- and hh3cDot11InterACRoamOutSuccCnt2 to hh3cDot11RoamStatis2Group. -- ===================================================================== HH3C-DOT11-ROAM-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, MacAddress, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC Counter32, MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB hh3cDot11 FROM HH3C-DOT11-REF-MIB; hh3cDot11ROAM MODULE-IDENTITY LAST-UPDATED "201008041800Z" -- Aug 04, 2010 at 18:00 GMT ORGANIZATION "Hangzhou H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R.China Http://www.h3c.com Zip:100085" DESCRIPTION "This MIB provides information about WLAN roaming configuration. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. HA The AC to which a wireless station is connected by associating with an AP for the first time is the HA of the station. FA An AC that is other than the HA and to which a station is currently connected is an FA of the station. Fast-roam capable station A wireless station which directly associates to a fast-roam service (rsn+dot1X) with one AC for the first time. Roam-out station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-out station at its HA. Roam-in station A wireless station which has associated with an AC other than the HA in the mobility-group is referred to as a roam-in station at the FA. Intra-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to the same AC. Inter-AC roaming A procedure where a wireless station roams from one AP to another AP, which are connected to different ACs. Inter-AC fast roaming capability If a station uses 802.1x (RSN) authentication through negotiation, this station has inter-AC fast roaming capability. WLAN-tunnel One type of layer 2 interface which is bound with an IACTP data tunnel and used to tunnel unicast/broadcast frames between ACs." REVISION "201008041800Z" -- Aug 04, 2010 at 18:00 GMT DESCRIPTION "Modified to add new hh3cDot11RoamStatis2Group." REVISION "200905072000Z" DESCRIPTION "Modified to add new hh3cDot11RoamStatisGroup." REVISION "200807231200Z" DESCRIPTION "The initial revision of this MIB module." ::= { hh3cDot11 10 } -- ================================================================== -- Textual Conventions -- ================================================================== Hh3cDot11RoamMobileTunnelType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The protocol type of the mobility-tunnel. This object has two defined values: - 'ipv4', which indicates that the protocol type of the mobility-tunnel is IPv4. - 'ipv6', which indicates that the protocol type of the mobility-tunnel is IPv6. " SYNTAX INTEGER { ipv4(1), ipv6(2) } Hh3cDot11RoamAuthMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The authentication mode of the mobility-tunnel. This object has two defined values: - 'none', which indicates that the authentication mode of the mobility-tunnel is None. - 'md5', which indicates that the authentication mode of the mobility-tunnel is MD5. " SYNTAX INTEGER { none(1), md5(2) } Hh3cDot11RoamIACTPStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The status of IACTP state machine." SYNTAX INTEGER { init(1), idle(2), joinRequestWait(3), joinResponseWait(4), joinConfirmWait(5), joinError(6), run(7) } -- ================================================================== -- Major sections -- ================================================================== hh3cDot11RoamCfgGroup OBJECT IDENTIFIER ::= { hh3cDot11ROAM 1 } -- Roaming Configuration Group has the following children: -- hh3cDot11MobGrpTable ::= { hh3cDot11RoamCfgGroup 1 } -- hh3cDot11MobGrpMemberTable ::= { hh3cDot11RoamCfgGroup 2 } hh3cDot11RoamStatusGroup OBJECT IDENTIFIER ::= { hh3cDot11ROAM 2 } -- Roaming Status Group has the following children: -- hh3cDot11RoamInInfoTable ::= { hh3cDot11RoamStatusGroup 1 } -- hh3cDot11RoamOutInfoTable ::= { hh3cDot11RoamStatusGroup 2 } -- hh3cDot11RoamTrackTable ::= { hh3cDot11RoamStatusGroup 3 } hh3cDot11RoamStatisGroup OBJECT IDENTIFIER ::= { hh3cDot11ROAM 3 } -- Roaming Statis Group has the following children: -- hh3cDot11IntraACRoamingSuccCnt ::= { hh3cDot11RoamStatusGroup 1 } -- hh3cDot11InterACRoamingSuccCnt ::= { hh3cDot11RoamStatusGroup 2 } hh3cDot11RoamStatis2Group OBJECT IDENTIFIER ::= { hh3cDot11ROAM 4 } -- Roaming Statis Group has the following children: -- hh3cDot11IntraACRoamingSuccCnt2 ::= { hh3cDot11RoamStatus2Group 1 } -- hh3cDot11InterACRoamingSuccCnt2 ::= { hh3cDot11RoamStatus2Group 2 } -- hh3cDot11InterACRoamOutSuccCnt2 ::= { hh3cDot11RoamStatus2Group 3 } -- ================================================================== -- hh3cDot11RoamCfgGroup Definition -- ================================================================== -- ================================================================== -- hh3cDot11MobGrpTable Definition -- ================================================================== hh3cDot11MobGrpTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cDot11MobGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for roaming group configuration." ::= { hh3cDot11RoamCfgGroup 1 } hh3cDot11MobGrpEntry OBJECT-TYPE SYNTAX Hh3cDot11MobGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information of mobile group." INDEX { hh3cDot11MobGrpName } ::= { hh3cDot11MobGrpTable 1 } Hh3cDot11MobGrpEntry ::= SEQUENCE { hh3cDot11MobGrpName OCTET STRING, hh3cdot11MobGrpTunnelType Hh3cDot11RoamMobileTunnelType, hh3cDot11MobGrpSrcIPAddr InetAddress, hh3cDot11MobGrpAuthMode Hh3cDot11RoamAuthMode, hh3cDot11MobGrpAuthKey OCTET STRING, hh3cDot11MobGrpEnable TruthValue, hh3cDot11MobGrpRowStatus RowStatus } hh3cDot11MobGrpName OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1..15)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the name of roam group." ::= { hh3cDot11MobGrpEntry 1 } hh3cdot11MobGrpTunnelType OBJECT-TYPE SYNTAX Hh3cDot11RoamMobileTunnelType MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the protocol type of mobility-tunnel." DEFVAL { ipv4 } ::= { hh3cDot11MobGrpEntry 2 } hh3cDot11MobGrpSrcIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the IP address of tunnel source. The IP address type must be the same as hh3cdot11MobGrpTunnelType. The default value is zero." ::= { hh3cDot11MobGrpEntry 3 } hh3cDot11MobGrpAuthMode OBJECT-TYPE SYNTAX Hh3cDot11RoamAuthMode MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the authentication mode of IACTP tunnel. This object can be used to enable IACTP control message integrity authentication." DEFVAL { none } ::= { hh3cDot11MobGrpEntry 4 } hh3cDot11MobGrpAuthKey OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "Represents the authentication key of IACTP tunnel. Authentication key to be used with the given authentication method. This object can not be modified when the value of hh3cDot11MobGrpAuthMode is 'none'." ::= { hh3cDot11MobGrpEntry 5 } hh3cDot11MobGrpEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "State of a mobile group. 'true' : The WLAN mobility group will be enabled. 'false' : The inter-AC tunnel communication for the mobility group will be disabled. A mobility group can be enabled only when the source IP address is configured. The other objects in this entry can become effective only when mobility group is enabled. The other objects in this entry can not be modified after enabling mobility group." DEFVAL { false } ::= { hh3cDot11MobGrpEntry 6 } hh3cDot11MobGrpRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hh3cDot11MobGrpEntry 7 } -- ================================================================== -- hh3cDot11MobGrpMemberTable Definition -- ================================================================== hh3cDot11MobGrpMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cDot11MobGrpMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table defines the parameters for roaming member configuration." ::= { hh3cDot11RoamCfgGroup 2 } hh3cDot11MobGrpMemberEntry OBJECT-TYPE SYNTAX Hh3cDot11MobGrpMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information of mobile group member." INDEX { hh3cDot11MobGrpName, hh3cDot11MobGrpMemberIpAddr } ::= { hh3cDot11MobGrpMemberTable 1 } Hh3cDot11MobGrpMemberEntry ::= SEQUENCE { hh3cDot11MobGrpMemberIpAddr InetAddress, hh3cDot11MobGrpMemberStatus Hh3cDot11RoamIACTPStatus, hh3cDot11MobGrpMemberIf OCTET STRING, hh3cDot11MobGrpMemberUpTime Integer32, hh3cDot11MobGrpMemberRowStatus RowStatus } hh3cDot11MobGrpMemberIpAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the IP address of group member. It can not be the same as the source IP address of the mobile group. The address type must be the same as the hh3cdot11MobGrpTunnelType." ::= { hh3cDot11MobGrpMemberEntry 1 } hh3cDot11MobGrpMemberStatus OBJECT-TYPE SYNTAX Hh3cDot11RoamIACTPStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the status of group member." ::= { hh3cDot11MobGrpMemberEntry 2 } hh3cDot11MobGrpMemberIf OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the tunnel interface name of group member." ::= { hh3cDot11MobGrpMemberEntry 3 } hh3cDot11MobGrpMemberUpTime OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the sustaining time from tunnel up. If tunnel is down, MemberUpTime is zero." ::= { hh3cDot11MobGrpMemberEntry 4 } hh3cDot11MobGrpMemberRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { hh3cDot11MobGrpMemberEntry 5 } -- ================================================================== -- hh3cDot11RoamStatusGroup Definition -- ================================================================== -- ================================================================== -- hh3cDot11RoamInInfoTable Definition -- ================================================================== hh3cDot11RoamInInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cDot11RoamInInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table can used to display the information of roaming in client." ::= { hh3cDot11RoamStatusGroup 1 } hh3cDot11RoamInInfoEntry OBJECT-TYPE SYNTAX Hh3cDot11RoamInInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information of roaming in client." INDEX { hh3cDot11RoamClientMAC } ::= { hh3cDot11RoamInInfoTable 1 } Hh3cDot11RoamInInfoEntry ::= SEQUENCE { hh3cDot11RoamClientMAC MacAddress, hh3cDot11RoamInClientBSSID MacAddress, hh3cDot11RoamInClientVlanID Integer32, hh3cDot11RoamInHomeACIPType InetAddressType, hh3cDot11RoamInHomeACIPAddr InetAddress } hh3cDot11RoamClientMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the MAC address of roaming in client." ::= { hh3cDot11RoamInInfoEntry 1 } hh3cDot11RoamInClientBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents BSSID of the AP to which the Roam-In client is associated." ::= { hh3cDot11RoamInInfoEntry 2 } hh3cDot11RoamInClientVlanID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the VLAN ID of Roam-In client." ::= { hh3cDot11RoamInInfoEntry 3 } hh3cDot11RoamInHomeACIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the protocol type of home AC address." ::= { hh3cDot11RoamInInfoEntry 4 } hh3cDot11RoamInHomeACIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the address of home AC." ::= { hh3cDot11RoamInInfoEntry 5 } -- ================================================================== -- hh3cDot11RoamOutInfoTable Definition -- ================================================================== hh3cDot11RoamOutInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cDot11RoamOutInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table can used to display the information of roaming out client." ::= { hh3cDot11RoamStatusGroup 2 } hh3cDot11RoamOutInfoEntry OBJECT-TYPE SYNTAX Hh3cDot11RoamOutInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information of roaming out client." INDEX { hh3cDot11RoamClientMAC } ::= { hh3cDot11RoamOutInfoTable 1 } Hh3cDot11RoamOutInfoEntry ::= SEQUENCE { hh3cDot11RoamOutClientBSSID MacAddress, hh3cDot11RoamOutClientVlanID Integer32, hh3cDot11RoamOutForeignACIPType InetAddressType, hh3cDot11RoamOutForeignACIPAddr InetAddress, hh3cDot11RoamOutClientUpTime Integer32 } hh3cDot11RoamOutClientBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the BSSID of the AP to which the Roam-Out client is associated." ::= { hh3cDot11RoamOutInfoEntry 1 } hh3cDot11RoamOutClientVlanID OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the VLAN ID of Roam-Out client." ::= { hh3cDot11RoamOutInfoEntry 2 } hh3cDot11RoamOutForeignACIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the protocol type of foreign AC address." ::= { hh3cDot11RoamOutInfoEntry 3 } hh3cDot11RoamOutForeignACIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the address of foreign AC." ::= { hh3cDot11RoamOutInfoEntry 4 } hh3cDot11RoamOutClientUpTime OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents how long the Roam-Out client is associated with the foreign AC." ::= { hh3cDot11RoamOutInfoEntry 5 } -- ================================================================== -- hh3cDot11RoamTrackTable Definition -- ================================================================== hh3cDot11RoamTrackTable OBJECT-TYPE SYNTAX SEQUENCE OF Hh3cDot11RoamTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the roam-track information of a specified client on the client's HA." ::= { hh3cDot11RoamStatusGroup 3 } hh3cDot11RoamTrackEntry OBJECT-TYPE SYNTAX Hh3cDot11RoamTrackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains information of a specified client on the client's HA." INDEX { hh3cDot11RoamTrackIndex } ::= { hh3cDot11RoamTrackTable 1 } Hh3cDot11RoamTrackEntry ::= SEQUENCE { hh3cDot11RoamTrackIndex Integer32, hh3cDot11RoamTrackClientMAC MacAddress, hh3cDot11RoamTrackBSSID MacAddress, hh3cDot11RoamTrackUpTime Integer32, hh3cDot11RoamTrackACIPType InetAddressType, hh3cDot11RoamTrackACIPAddr InetAddress } hh3cDot11RoamTrackIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the index of this entry." ::= { hh3cDot11RoamTrackEntry 1 } hh3cDot11RoamTrackClientMAC OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the MAC address of the roamed client." ::= { hh3cDot11RoamTrackEntry 2 } hh3cDot11RoamTrackBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the BSSID of the AP with which the client is associated." ::= { hh3cDot11RoamTrackEntry 3 } hh3cDot11RoamTrackUpTime OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents how long the client is associated with the BSSID." ::= { hh3cDot11RoamTrackEntry 4 } hh3cDot11RoamTrackACIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the protocol type of the IP address of the access controller with which the client is connected." ::= { hh3cDot11RoamTrackEntry 5 } hh3cDot11RoamTrackACIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the IP address of the access controller with which the client is connected." ::= { hh3cDot11RoamTrackEntry 6 } -- ================================================================== -- hh3cDot11RoamStatisGroup Definition -- ================================================================== hh3cDot11IntraACRoamingSuccCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the count of client successfully roam Intra-AC." ::= { hh3cDot11RoamStatisGroup 1 } hh3cDot11InterACRoamingSuccCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the count of client successfully roam in Inter-AC." ::= { hh3cDot11RoamStatisGroup 2 } hh3cDot11InterACRoamOutSuccCnt OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the count of client successfully roam out Inter-AC." ::= { hh3cDot11RoamStatisGroup 3 } -- ================================================================== -- End of hh3cDot11RoamStatisGroup Definition -- ================================================================== -- ================================================================== -- hh3cDot11RoamStatis2Group Definition -- ================================================================== hh3cDot11IntraACRoamingSuccCnt2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the count of client successfully roam Intra-AC in Counter32." ::= { hh3cDot11RoamStatis2Group 1 } hh3cDot11InterACRoamingSuccCnt2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the count of client successfully roam in Inter-AC in Counter32." ::= { hh3cDot11RoamStatis2Group 2 } hh3cDot11InterACRoamOutSuccCnt2 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the count of client successfully roam out Inter-AC in Counter32." ::= { hh3cDot11RoamStatis2Group 3 } -- ================================================================== -- End of hh3cDot11RoamStatis2Group Definition -- ================================================================== END