-- ========================================================================== -- Copyright (C) 2008 by H3C Technologies. All rights reserved. -- -- Description: The purpose of this MIB file is to provide the definition of -- voice call record. -- Reference: -- Version: V1.0 -- History: -- V1.0 2008-02-17 Initial version, created by Tian Xiaoqiang, Qu Jin -- ========================================================================== H3C-VOICE-CALL-ACTIVE-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, MODULE-IDENTITY, Integer32, Gauge32 FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB H3cCodecType FROM H3C-VOICE-DIAL-CONTROL-MIB callActiveSetupTime, callActiveIndex FROM DIAL-CONTROL-MIB TEXTUAL-CONVENTION FROM SNMPv2-TC h3cVoice FROM HUAWEI-3COM-OID-MIB; h3cVoCallActive MODULE-IDENTITY LAST-UPDATED "200802170000Z" ORGANIZATION "Hangzhou H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085" DESCRIPTION "This MIB file is to provide the definition of voice call active record information." REVISION "200802170000Z" DESCRIPTION "The initial version of this MIB file." ::= { h3cVoice 15 } -- ====================================== -- Type declaration -- ====================================== H3cGUid ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents a global call identifier. The global call identifier is used as an unique identifier for an end-to-end call. A zero length H3cGUid indicates no value for the global call identifier." SYNTAX OCTET STRING(SIZE(0..16)) h3cVoiceCallActiveObjects OBJECT IDENTIFIER ::= { h3cVoCallActive 1 } -- =========================================================================== -- h3cVoiceCallActiveTable -- =========================================================================== h3cVoiceCallActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cVoiceCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the voice extension to the call active table of DIAL-CONTROL-MIB. It contains voice encapsulation call leg information that is derived from the statistics of lower layer telephony interface." ::= { h3cVoiceCallActiveObjects 1 } h3cVoiceCallActiveEntry OBJECT-TYPE SYNTAX H3cVoiceCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single voice encapsulation call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-CONTROL-MIB to identify the call. An entry of this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created and call active entry contains the call establishment to a voice over telephony network peer. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted." INDEX { callActiveSetupTime, callActiveIndex } ::= { h3cVoiceCallActiveTable 1 } H3cVoiceCallActiveEntry ::= SEQUENCE { h3cVoCallActiveConnectionId H3cGUid, h3cVoCallActiveTxDuration Gauge32, h3cVoCallActiveVoiceTxDuration Gauge32, h3cVoCallActiveFaxTxDuration Gauge32, h3cVoCallActiveCoderType H3cCodecType, h3cVoCallActiveImgPageCount Gauge32 } h3cVoCallActiveConnectionId OBJECT-TYPE SYNTAX H3cGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global call identifier for the gateway call." ::= { h3cVoiceCallActiveEntry 1 } h3cVoCallActiveTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of transmit path open from this peer to the voice gateway for the call. The units is milliseconds." ::= { h3cVoiceCallActiveEntry 2 } h3cVoCallActiveVoiceTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of voice transmitted from this peer to voice gateway for this call. The voice utilization rate can be obtained by dividing this by h3cVoCallActiveTXDuration object. The units is milliseconds." ::= { h3cVoiceCallActiveEntry 3 } h3cVoCallActiveFaxTxDuration OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of fax transmitted from this peer to voice gateway for this call. The fax utilization rate can be obtained by dividing this by h3cVoCallActiveTXDuration object. The units is milliseconds." ::= { h3cVoiceCallActiveEntry 4 } h3cVoCallActiveCoderType OBJECT-TYPE SYNTAX H3cCodecType MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder type. It specifies the encode type to the PSTN leg of a call." ::= { h3cVoiceCallActiveEntry 5 } h3cVoCallActiveImgPageCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of fax related image pages are received or transmitted via the peer for the call. The units is pages." ::= { h3cVoiceCallActiveEntry 6 } -- =========================================================================== -- h3cVoiceVoIPCallActiveTable -- =========================================================================== h3cVoiceVoIPCallActiveTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cVoiceVoIPCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is the VoIP extension to the call active table of DIAL-CONTROL-MIB. It contains VoIP call leg information about specific VoIP call destination." ::= { h3cVoiceCallActiveObjects 2 } h3cVoiceVoIPCallActiveEntry OBJECT-TYPE SYNTAX H3cVoiceVoIPCallActiveEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information regarding a single VoIP call leg. The call leg entry is identified by using the same index objects that are used by call active table of DIAL-CONTROL-MIB to identify the call. An entry of this table is created when its associated call active entry in the DIAL-CONTROL-MIB is created and the call active entry contains information for the call establishment to the peer on the IP backbone via a voice over IP peer. The entry is deleted when its associated call active entry in the DIAL-CONTROL-MIB is deleted." INDEX { callActiveSetupTime, callActiveIndex } ::= { h3cVoiceVoIPCallActiveTable 1 } H3cVoiceVoIPCallActiveEntry ::= SEQUENCE { h3cVoVoIPCallActiveConnectionId H3cGUid, h3cVoVoIPCallActiveRemSigIPType InetAddressType, h3cVoVoIPCallActiveRemSigIPAddr InetAddress, h3cVoVoIPCallActiveRemSigPort Integer32, h3cVoVoIPCallActiveRemMedIPType InetAddressType, h3cVoVoIPCallActiveRemMedIPAddr InetAddress, h3cVoVoIPCallActiveRemMedPort Integer32, h3cVoVoIPCallActiveSessProtocol INTEGER, h3cVoVoIPCallActiveCoderType H3cCodecType } h3cVoVoIPCallActiveConnectionId OBJECT-TYPE SYNTAX H3cGUid MAX-ACCESS read-only STATUS current DESCRIPTION "The global call identifier for the gateway call." ::= { h3cVoiceVoIPCallActiveEntry 1 } h3cVoVoIPCallActiveRemSigIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote system signalling IP address for the VoIP call." ::= { h3cVoiceVoIPCallActiveEntry 2 } h3cVoVoIPCallActiveRemSigIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system signalling IP address for the VoIP call." ::= { h3cVoiceVoIPCallActiveEntry 3 } h3cVoVoIPCallActiveRemSigPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system UDP listener signalling port to which to transmit voice packets." ::= { h3cVoiceVoIPCallActiveEntry 4 } h3cVoVoIPCallActiveRemMedIPType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of remote system media IP address for the VoIP call." ::= { h3cVoiceVoIPCallActiveEntry 5 } h3cVoVoIPCallActiveRemMedIPAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system media IP address for the VoIP call." ::= { h3cVoiceVoIPCallActiveEntry 6 } h3cVoVoIPCallActiveRemMedPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Remote system UDP listener media port to which to transmit voice packets." ::= { h3cVoiceVoIPCallActiveEntry 7 } h3cVoVoIPCallActiveSessProtocol OBJECT-TYPE SYNTAX INTEGER { unknown(1), h323(2), sip(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The object specifies the session protocol to be used for internet call between local and remote router via IP backbone." ::= { h3cVoiceVoIPCallActiveEntry 8 } h3cVoVoIPCallActiveCoderType OBJECT-TYPE SYNTAX H3cCodecType MAX-ACCESS read-only STATUS current DESCRIPTION "The negotiated coder type. It specifies the encode type to the VoIP leg of a call." ::= { h3cVoiceVoIPCallActiveEntry 9 } END