-- ================================================================== -- Copyright (C) 2003 by HUAWEI 3COM TECHNOLOGIES. All rights reserved. -- -- Description: HUAWEI-3COM 802.1Q-in-Q and BPDU Tunnel MIB -- Reference: -- Version: V1.1 -- History: -- V1.0 2006-03-10 Initial version Created by Baiping Chen -- V1.1 2007/10/15 modified by wangjinwang -- Add h3cQinQServiceTPIDValue and h3cQinQCustomerTPIDValue -- to h3cQinQGlobalConfigGroup. -- Add h3cQinQIfServiceTPIDValue h3cQinQIfCustomerTPIDValue -- h3cQinQIfUplinkSwitch and h3cQinQIfDownlinkSwitch -- to h3cQinQIfConfigTable. -- ================================================================== H3C-QINQ-MIB DEFINITIONS ::= BEGIN IMPORTS RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI ifIndex FROM RFC1213-MIB h3cCommon FROM HUAWEI-3COM-OID-MIB; -- ================================================================== -- -- module identity part -- -- ================================================================== h3cQINQ MODULE-IDENTITY LAST-UPDATED "200603100000Z" ORGANIZATION "Huawei-3Com Technologies Co., Ltd." CONTACT-INFO "Platform Team Huawei-3Com Technologies Co., Ltd. Hai-Dian District Beijing P.R. China http://www.huawei-3com.com Zip: 100085" DESCRIPTION "HUAWEI-3COM 802.1Q-in-Q MIB" REVISION "200603100000Z" DESCRIPTION "The initial version of this MIB." ::= { h3cCommon 69 } -- ================================================================== -- -- Textual Conventions -- -- ================================================================== H3cQinQSwitchState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "An enumerated value which indicates the state of switch." SYNTAX INTEGER { enabled(1), disabled(2) } -- ================================================================== -- -- =====================object definition begin====================== -- -- ================================================================== h3cQinQMibObject OBJECT IDENTIFIER ::= { h3cQINQ 1 } h3cQinQGlobalConfigGroup OBJECT IDENTIFIER ::= { h3cQinQMibObject 1 } h3cQinQBpduTunnelSwitch OBJECT-TYPE SYNTAX H3cQinQSwitchState MAX-ACCESS read-write STATUS current DESCRIPTION "The global configuration switch of BPDU 802.1q tunnel. If global configuration is disabled, BPDU tunnel function will be disabled despite of the corresponding configuration of interface. BPDU tunnel function of a certain interface would work only if the global and interface's switch are both enabled." DEFVAL { enabled } ::= { h3cQinQGlobalConfigGroup 1 } h3cQinQEthernetTypeValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet protocol type configuring for a global value. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface or VLAN. The node that configure this value for a single interface is h3cQinQIfEthernetType, whose priority is higher than h3cQinQEthernetTypeValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. The ethernet protocol type of node h3cQinQVidEthernetType that configured for a VLAN has the highest priority." DEFVAL { 33024 } ::= { h3cQinQGlobalConfigGroup 2 } h3cQinQServiceTPIDValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet protocol type configured for service VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is h3cQinQIfServiceTPIDValue, whose priority is higher than h3cQinQServiceTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration." ::= { h3cQinQGlobalConfigGroup 3 } h3cQinQCustomerTPIDValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Ethernet protocol type configured for customer VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is h3cQinQIfCustomerTPIDValue, whose priority is higher than h3cQinQCustomerTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration." ::= { h3cQinQGlobalConfigGroup 4 } h3cQinQBpduTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cQinQBpduTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring 802.1q BPDU tunnel function for interfaces." ::= { h3cQinQMibObject 2 } h3cQinQBpduTunnelEntry OBJECT-TYPE SYNTAX H3cQinQBpduTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring 802.1q BPDU tunnel function for interfaces." INDEX { ifIndex, h3cQinQProtocolIndex } ::= { h3cQinQBpduTunnelTable 1 } H3cQinQBpduTunnelEntry ::= SEQUENCE { h3cQinQProtocolIndex INTEGER, h3cQinQBpduRowStatus RowStatus } h3cQinQProtocolIndex OBJECT-TYPE SYNTAX INTEGER { bpdu(1), stp(2), gvrp(3), igmp(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index of protocol on which the BPDU tunnel state will be set. 'bpdu' represents status of BPDU tunnel. 'stp' represents STP tunnel. 'gvrp' represents GVRP tunnel. 'igmp' represents IGMP tunnel. STP/GVRP/IGMP tunnel will start to work only if BPDU tunnel and STP/GVRP/IGMP tunnel are both enabled." ::= { h3cQinQBpduTunnelEntry 1 } h3cQinQBpduRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry." ::= { h3cQinQBpduTunnelEntry 2 } h3cQinQPriorityRemarkTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cQinQPriorityRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring priority field in 802.1Q-in-Q outer VLAN tag for interfaces. This feature uses the priority of an inner VLAN tag to remark the priority of an outer VLAN tag." ::= { h3cQinQMibObject 3 } h3cQinQPriorityRemarkEntry OBJECT-TYPE SYNTAX H3cQinQPriorityRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring priority remark function for interfaces." INDEX { ifIndex, h3cQinQPriorityValue } ::= { h3cQinQPriorityRemarkTable 1 } H3cQinQPriorityRemarkEntry ::= SEQUENCE { h3cQinQPriorityValue Integer32, h3cQinQPriorityRemarkValue Integer32, h3cQinQPriorityRowStatus RowStatus } h3cQinQPriorityValue OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value." ::= { h3cQinQPriorityRemarkEntry 1 } h3cQinQPriorityRemarkValue OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The new priority value used to fill outer tag." ::= { h3cQinQPriorityRemarkEntry 2 } h3cQinQPriorityRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry." ::= { h3cQinQPriorityRemarkEntry 3 } h3cQinQVidTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cQinQVidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring VLAN ID of the 802.1Q-in-Q interfaces." ::= { h3cQinQMibObject 4 } h3cQinQVidEntry OBJECT-TYPE SYNTAX H3cQinQVidEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring VLAN ID of the 802.1Q-in-Q interfaces." INDEX { ifIndex, h3cQinQVlanID } ::= { h3cQinQVidTable 1 } H3cQinQVidEntry ::= SEQUENCE { h3cQinQVlanID Integer32, h3cQinQInboundVidListLow OCTET STRING, h3cQinQInboundVidListHigh OCTET STRING, h3cQinQVidEthernetType Integer32, h3cQinQVidRowStatus RowStatus } h3cQinQVlanID OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "VLAN ID" ::= { h3cQinQVidEntry 1 } h3cQinQInboundVidListLow OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN." ::= { h3cQinQVidEntry 2 } h3cQinQInboundVidListHigh OBJECT-TYPE SYNTAX OCTET STRING (SIZE(256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN." ::= { h3cQinQVidEntry 3 } h3cQinQVidEthernetType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Ethernet protocol type configuring for a VLAN." DEFVAL { 33024 } ::= { h3cQinQVidEntry 4 } h3cQinQVidRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry." ::= { h3cQinQVidEntry 5 } h3cQinQVidSwapTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cQinQVidSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces." ::= { h3cQinQMibObject 5 } h3cQinQVidSwapEntry OBJECT-TYPE SYNTAX H3cQinQVidSwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces." INDEX { ifIndex, h3cQinQVlanID, h3cQinQVidSwapOld } ::= { h3cQinQVidSwapTable 1 } H3cQinQVidSwapEntry ::= SEQUENCE { h3cQinQVidSwapOld Integer32, h3cQinQVidSwapNew Integer32, h3cQinQVidSwapRowStatus RowStatus } h3cQinQVidSwapOld OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The old VLAN ID of original 802.1Q packets." ::= { h3cQinQVidSwapEntry 1 } h3cQinQVidSwapNew OBJECT-TYPE SYNTAX Integer32 (1..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "The new VLAN ID of original 802.1Q packets." ::= { h3cQinQVidSwapEntry 2 } h3cQinQVidSwapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry." ::= { h3cQinQVidSwapEntry 3 } h3cQinQPrioritySwapTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cQinQPrioritySwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. Using this function, the priority of inner VLAN tag can be modified." ::= { h3cQinQMibObject 6 } h3cQinQPrioritySwapEntry OBJECT-TYPE SYNTAX H3cQinQPrioritySwapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces." INDEX { ifIndex, h3cQinQVlanID, h3cQinQPrioritySwapOld } ::= { h3cQinQPrioritySwapTable 1 } H3cQinQPrioritySwapEntry ::= SEQUENCE { h3cQinQPrioritySwapOld Integer32, h3cQinQPrioritySwapNew Integer32, h3cQinQPrioritySwapRowStatus RowStatus } h3cQinQPrioritySwapOld OBJECT-TYPE SYNTAX Integer32 (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The old priority of original 802.1Q packets. It is the priority of inner VLAN tag. Since the VLAN priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value." ::= { h3cQinQPrioritySwapEntry 1 } h3cQinQPrioritySwapNew OBJECT-TYPE SYNTAX Integer32 (0..7) MAX-ACCESS read-create STATUS current DESCRIPTION "The new priority of original 802.1Q packets. It is the priority of inner VLAN tag after swapped." ::= { h3cQinQPrioritySwapEntry 2 } h3cQinQPrioritySwapRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry." ::= { h3cQinQPrioritySwapEntry 3 } h3cQinQIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cQinQIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring 802.1Q-in-Q functions for interfaces." ::= { h3cQinQMibObject 7 } h3cQinQIfConfigEntry OBJECT-TYPE SYNTAX H3cQinQIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for configuring 802.1Q-in-Q functions for interfaces." INDEX { ifIndex } ::= { h3cQinQIfConfigTable 1 } H3cQinQIfConfigEntry ::= SEQUENCE { h3cQinQIfEthernetType Integer32, h3cQinQIfSwitch H3cQinQSwitchState, h3cQinQIfRowStatus RowStatus, h3cQinQIfServiceTPIDValue Integer32, h3cQinQIfCustomerTPIDValue Integer32, h3cQinQIfUplinkSwitch H3cQinQSwitchState, h3cQinQIfDownlinkSwitch H3cQinQSwitchState } h3cQinQIfEthernetType OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Ethernet protocol type configuring for an interface." DEFVAL { 33024 } ::= { h3cQinQIfConfigEntry 1 } h3cQinQIfSwitch OBJECT-TYPE SYNTAX H3cQinQSwitchState MAX-ACCESS read-create STATUS current DESCRIPTION "Switch of 802.1Q-in-Q functions configuring for an interface." DEFVAL { disabled } ::= { h3cQinQIfConfigEntry 2 } h3cQinQIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Operation status of this table entry." ::= { h3cQinQIfConfigEntry 3 } h3cQinQIfServiceTPIDValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Service TPID value configured for an interface." ::= { h3cQinQIfConfigEntry 4 } h3cQinQIfCustomerTPIDValue OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "Customer TPID value configured for an interface." ::= { h3cQinQIfConfigEntry 5 } h3cQinQIfUplinkSwitch OBJECT-TYPE SYNTAX H3cQinQSwitchState MAX-ACCESS read-create STATUS current DESCRIPTION "Switch of the uplink 802.1Q-in-Q function for an interface." DEFVAL { disabled } ::= { h3cQinQIfConfigEntry 6 } h3cQinQIfDownlinkSwitch OBJECT-TYPE SYNTAX H3cQinQSwitchState MAX-ACCESS read-create STATUS current DESCRIPTION "Switch of the downlink 802.1Q-in-Q function for an interface." DEFVAL { disabled } ::= { h3cQinQIfConfigEntry 7 } END