-- ============================================================================= -- Copyright (C) 2009 by H3C Technologies Co., Ltd. All rights reserved. -- -- Description: -- The file defines a MIB to provide MESH configuration information. -- Reference: -- Version: V1.2 -- History: -- V1.0 2008-07-08 Initial version, created by ChangHuifeng -- V1.1 2008-11-07 modified by liyugang -- Add h3cDot11sMeshLinkStatisTable, h3cDot11sMeshNbrStatusTable -- to h3cDot11sMeshStatusGroup -- V1.2 2009-08-01 modified by Wang Shaojie -- Add h3cDot11sMeshLinkIFName to h3cDot11sMeshLinkStatisTable. -- ============================================================================= H3C-DOT11S-MESH-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, MacAddress, RowStatus FROM SNMPv2-TC MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, Counter32 FROM SNMPv2-SMI h3cDot11, H3cDot11RadioElementIndex, h3cDot11APElementIndex FROM H3C-DOT11-REF-MIB; h3cDot11sMesh MODULE-IDENTITY LAST-UPDATED "200908011000Z" -- Nov 07, 2008 at 10:00 GMT ORGANIZATION "Hangzhou H3C Technologies Co., Ltd." CONTACT-INFO "Platform Team Hangzhou H3C Technologies Co., Ltd. Hai-Dian District Beijing P.R. China Http://www.h3c.com Zip:100085" DESCRIPTION "The file defines a MIB to provide MESH configuration information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Mesh A network consisting of two or more mesh points which communicate with each other via mesh services. Mesh Point (MP) An IEEE 802.11 entity that contains an IEEE 802.11-conformant medium access control (MAC) and physical layer (PHY) interface to the wireless medium (WM) that supports mesh services. Mesh Access Point (MAP) A mesh point that is collocated with one or more access points. Mesh Portal Point (MPP) A mesh point that is collocated with one or more portals. Mesh Link A link between two MPs." REVISION "200908011000Z" -- Aug 01, 2009 at 10:00 GMT DESCRIPTION "Add new nodes." REVISION "200811071000Z" -- Nov 07, 2008 at 10:00 GMT DESCRIPTION "Modified to add new nodes and a new table." REVISION "200807081800Z" -- July 8, 2008 at 18:00 GMT DESCRIPTION "The initial revision of this MIB module." ::= { h3cDot11 11 } -- ***************************************************************************** -- * Major sections -- ***************************************************************************** h3cDot11sConfigGroup OBJECT IDENTIFIER ::= { h3cDot11sMesh 1 } -- Dot11s Configuration Group has the following children: -- h3cDot11sMeshGlobalPara ::= { h3cDot11sConfigGroup 1 } -- h3cDot11sMeshPflTable ::= { h3cDot11sConfigGroup 2 } -- h3cDot11sMpPlcyTable ::= { h3cDot11sConfigGroup 3 } -- h3cDot11sMlspCfgTable ::= { h3cDot11sConfigGroup 4 } -- h3cDot11sRadioCfgTable ::= { h3cDot11sConfigGroup 5 } -- h3cDot11sAPCfgTable ::= { h3cDot11sConfigGroup 6 } h3cDot11sWDSConfigGroup OBJECT IDENTIFIER ::= { h3cDot11sMesh 2 } -- Dot11s WDS Configuration Group has the following children: -- h3cDot11sWDSPeerMacTable ::= { h3cDot11sWDSConfigGroup 1 } h3cDot11sMeshStatusGroup OBJECT IDENTIFIER ::= { h3cDot11sMesh 3 } -- Dot11s Mesh Status Group has the following children: -- h3cDot11sMeshLinkStatusTable ::= { h3cDot11sMeshStatusGroup 1 } -- h3cDot11sMeshLinkStatisTable ::= { h3cDot11sMeshStatusGroup 2 } -- h3cDot11sMeshNbrStatusTable ::= { h3cDot11sMeshStatusGroup 3 } -- ***************************************************************************** -- * h3cDot11sMeshGlobalPara Definition -- ***************************************************************************** h3cDot11sMeshGlobalPara OBJECT IDENTIFIER ::= { h3cDot11sConfigGroup 1 } h3cDot11sMeshMkdID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the mesh key distributor identifier (MKD-ID). If the MKD-ID is not configured, the value is '00:00:00:00:00:00'." ::= { h3cDot11sMeshGlobalPara 1 } -- ***************************************************************************** -- * End of h3cDot11sMeshGlobalPara Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sMeshPflTable Definition -- ***************************************************************************** h3cDot11sMeshPflTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sMeshPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure mesh profile. A mesh profile is created and mapped to a MP so that it can provide mesh services to other MPs which have the same mesh ID. When the mesh profile is enabled, all of the object in this table can not be modified except h3cDot11sMeshPflEnable. The mesh profile can not be deleted when it is bound with the radio." ::= { h3cDot11sConfigGroup 2 } h3cDot11sMeshPflEntry OBJECT-TYPE SYNTAX H3cDot11sMeshPflEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of a mesh profile." INDEX { h3cDot11sMeshPflIndex } ::= { h3cDot11sMeshPflTable 1 } H3cDot11sMeshPflEntry ::= SEQUENCE { h3cDot11sMeshPflIndex Integer32, h3cDot11sMeshPflMeshID OCTET STRING, h3cDot11sMeshPflBindIntNum Integer32, h3cDot11sMeshPflKeepAlive Integer32, h3cDot11sMeshPflBackhaulRate Integer32, h3cDot11sMeshMkdServEnable TruthValue, h3cDot11sMeshPflEnable TruthValue, h3cDot11sMeshPflRowStatus RowStatus } h3cDot11sMeshPflIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the index of the mesh profile." ::= { h3cDot11sMeshPflEntry 1 } h3cDot11sMeshPflMeshID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mesh ID of the mesh profile. The string length of this object is zero when the mesh ID is not configured. If the mesh ID is not configured, h3cDot11sMeshPflEnable can not be set to 'true'." ::= { h3cDot11sMeshPflEntry 2 } h3cDot11sMeshPflBindIntNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the specified mesh interface number binding to the mesh profile. If the value is set to -1, the binding will be removed. If the mesh interface is not specified, the value of h3cDot11sMeshPflEnable can not be set to 'true'." DEFVAL { -1 } ::= { h3cDot11sMeshPflEntry 3 } h3cDot11sMeshPflKeepAlive OBJECT-TYPE SYNTAX Integer32(1..1800) UNITS "second" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the mesh link keep-alive interval." ::= { h3cDot11sMeshPflEntry 4 } h3cDot11sMeshPflBackhaulRate OBJECT-TYPE SYNTAX Integer32 UNITS "Kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link backhaul rate." ::= { h3cDot11sMeshPflEntry 5 } h3cDot11sMeshMkdServEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the mesh key distributor (MKD) service for the mesh profile is enabled. 'true': The MKD service for the mesh profile is enabled. 'false': The MKD service for the mesh profile is disabled." DEFVAL { false } ::= { h3cDot11sMeshPflEntry 6 } h3cDot11sMeshPflEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the mesh profile is enabled. 'true': The mesh profile is enabled. 'false': The mesh profile is disabled." DEFVAL { false } ::= { h3cDot11sMeshPflEntry 7 } h3cDot11sMeshPflRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { h3cDot11sMeshPflEntry 8 } -- ***************************************************************************** -- * End of h3cDot11sMeshPflTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sMpPlcyTable Definition -- ***************************************************************************** h3cDot11sMpPlcyTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sMpPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure MP policy. There is 'default_mp_plcy' on system by default and its index is 1. The 'default_mp_plcy' can not be deleted or modified. The MP policy can not be deleted when it is applied to a radio. It can not be modified when it is applied to an enabled radio." ::= { h3cDot11sConfigGroup 3 } h3cDot11sMpPlcyEntry OBJECT-TYPE SYNTAX H3cDot11sMpPlcyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of a MP policy." INDEX { h3cDot11sMpPlcyIndex } ::= { h3cDot11sMpPlcyTable 1 } H3cDot11sMpPlcyEntry ::= SEQUENCE { h3cDot11sMpPlcyIndex Integer32, h3cDot11sMpPlcyName OCTET STRING, h3cDot11sMpPlcyInitEnable TruthValue, h3cDot11sMlspEnable TruthValue, h3cDot11sProbReqInterval Integer32, h3cDot11sRoleAuthEnable TruthValue, h3cDot11sLinkHoldRSSI Integer32, h3cDot11sLinkHoldTime Integer32, h3cDot11sSwitchMargin Integer32, h3cDot11sLinkSaturationRSSI Integer32, h3cDot11sLinkRateMode INTEGER, h3cDot11sMaxLinkNum Integer32, h3cDot11sMpPlcyRowStatus RowStatus } h3cDot11sMpPlcyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the MP policy index." ::= { h3cDot11sMpPlcyEntry 1 } h3cDot11sMpPlcyName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..15)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the MP policy name. MP policy can not be created with name 'a', 'al', 'all' or 'default_mp_plcy'. Modification is not supported." ::= { h3cDot11sMpPlcyEntry 2 } h3cDot11sMpPlcyInitEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the link initiation for the MP policy is enabled. 'true': The link initiation for the MP policy is enabled. 'false': The link initiation for the MP policy is disabled." DEFVAL { true } ::= { h3cDot11sMpPlcyEntry 3 } h3cDot11sMlspEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the mesh link switch protocol (MLSP) is enabled. 'true': MLSP is enabled. 'false': MLSP is disabled." DEFVAL { false } ::= { h3cDot11sMpPlcyEntry 4 } h3cDot11sProbReqInterval OBJECT-TYPE SYNTAX Integer32 UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the probe request interval." ::= { h3cDot11sMpPlcyEntry 5 } h3cDot11sRoleAuthEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether the device can play as the role of an authenticator." DEFVAL { true } ::= { h3cDot11sMpPlcyEntry 6 } h3cDot11sLinkHoldRSSI OBJECT-TYPE SYNTAX Integer32(5..100) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link-hold receive signal strength indicator (RSSI)." ::= { h3cDot11sMpPlcyEntry 7 } h3cDot11sLinkHoldTime OBJECT-TYPE SYNTAX Integer32(1000..20000) UNITS "millisecond" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link-hold time." ::= { h3cDot11sMpPlcyEntry 8 } h3cDot11sSwitchMargin OBJECT-TYPE SYNTAX Integer32(1..100) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link-switch margin." ::= { h3cDot11sMpPlcyEntry 9 } h3cDot11sLinkSaturationRSSI OBJECT-TYPE SYNTAX Integer32(30..150) UNITS "dBm" MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the link saturation receive signal strength indicator (RSSI)." ::= { h3cDot11sMpPlcyEntry 10 } h3cDot11sLinkRateMode OBJECT-TYPE SYNTAX INTEGER { fixed(1), realtime(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the rate mode of the mesh link." DEFVAL { fixed } ::= { h3cDot11sMpPlcyEntry 11 } h3cDot11sMaxLinkNum OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the maximum number of the mesh link." ::= { h3cDot11sMpPlcyEntry 12 } h3cDot11sMpPlcyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { h3cDot11sMpPlcyEntry 13 } -- ***************************************************************************** -- * End of h3cDot11sMpPlcyTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sMlspCfgTable Definition -- ***************************************************************************** h3cDot11sMlspCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sMlspCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure MLSP proxy MAC address. Only if the specified MP policy is modifiable and the MLSP is enabled, the row of this table can be created and deleted. The row of this table can not be modified." ::= { h3cDot11sConfigGroup 4 } h3cDot11sMlspCfgEntry OBJECT-TYPE SYNTAX H3cDot11sMlspCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of MLSP proxy MAC address." INDEX { h3cDot11sMpPlcyIndex, h3cDot11sMlspProxyIndex } ::= { h3cDot11sMlspCfgTable 1 } H3cDot11sMlspCfgEntry ::= SEQUENCE { h3cDot11sMlspProxyIndex Integer32, h3cDot11sMlspProxyMac MacAddress, h3cDot11sMlspRowStatus RowStatus } h3cDot11sMlspProxyIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the MLSP proxy MAC address index." ::= { h3cDot11sMlspCfgEntry 1 } h3cDot11sMlspProxyMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the MLSP proxy MAC address." ::= { h3cDot11sMlspCfgEntry 2 } h3cDot11sMlspRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { h3cDot11sMlspCfgEntry 3 } -- ***************************************************************************** -- * End of h3cDot11sMlspCfgTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sRadioCfgTable Definition -- ***************************************************************************** h3cDot11sRadioCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure mesh to the specified radio." ::= { h3cDot11sConfigGroup 5 } h3cDot11sRadioCfgEntry OBJECT-TYPE SYNTAX H3cDot11sRadioCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains mesh configure information of the specified radio." INDEX { h3cDot11sCfgRadioIndex } ::= { h3cDot11sRadioCfgTable 1 } H3cDot11sRadioCfgEntry ::= SEQUENCE { h3cDot11sCfgRadioIndex H3cDot11RadioElementIndex, h3cDot11sMeshPflMap Integer32, h3cDot11sMpPlcyMap Integer32 } h3cDot11sCfgRadioIndex OBJECT-TYPE SYNTAX H3cDot11RadioElementIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents index of the radio." ::= { h3cDot11sRadioCfgEntry 1 } h3cDot11sMeshPflMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the number of the mesh profile mapped to the specified radio. The value is zero when the radio is not binding mesh profile." DEFVAL { 0 } ::= { h3cDot11sRadioCfgEntry 2 } h3cDot11sMpPlcyMap OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the index of the MP policy mapped to the specified radio. The MP policy is 'default_mp_plcy' when the radio is not binding user-defined MP policy. The index of 'default_mp_plcy' is 1. This object can not be modified when the radio is enabled." DEFVAL { 1 } ::= { h3cDot11sRadioCfgEntry 3 } -- ***************************************************************************** -- * End of h3cDot11sRadioCfgTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sAPCfgTable Definition -- ***************************************************************************** h3cDot11sAPCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure mesh to the specified AP." ::= { h3cDot11sConfigGroup 6 } h3cDot11sAPCfgEntry OBJECT-TYPE SYNTAX H3cDot11sAPCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains mesh configure information of the specified AP." INDEX { h3cDot11APElementIndex } ::= { h3cDot11sAPCfgTable 1 } H3cDot11sAPCfgEntry ::= SEQUENCE { h3cDot11sPortalEnable TruthValue } h3cDot11sPortalEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the portal service is enabled. 'true': The portal service is enabled. 'false': The portal service is disabled." DEFVAL { false } ::= { h3cDot11sAPCfgEntry 1 } -- ***************************************************************************** -- * End of h3cDot11sAPCfgTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sWDSPeerMacTable Definition -- ***************************************************************************** h3cDot11sWDSPeerMacTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sWDSPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure wireless distribution system (WDS). The row of this table can not be modified." ::= { h3cDot11sWDSConfigGroup 1 } h3cDot11sWDSPeerMacEntry OBJECT-TYPE SYNTAX H3cDot11sWDSPeerMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information of WDS." INDEX { h3cDot11sCfgRadioIndex, h3cDot11sWDSPeerMacIndex } ::= { h3cDot11sWDSPeerMacTable 1 } H3cDot11sWDSPeerMacEntry ::= SEQUENCE { h3cDot11sWDSPeerMacIndex Integer32, h3cDot11sWDSPeerMacAddrss MacAddress, h3cDot11sWDSPeerMacRowStatus RowStatus } h3cDot11sWDSPeerMacIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the peer MAC address index." ::= { h3cDot11sWDSPeerMacEntry 1 } h3cDot11sWDSPeerMacAddrss OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "This object represents the peer MAC address." ::= { h3cDot11sWDSPeerMacEntry 2 } h3cDot11sWDSPeerMacRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this table entry." ::= { h3cDot11sWDSPeerMacEntry 3 } -- ***************************************************************************** -- * End of h3cDot11sWDSPeerMacTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sMeshLinkStatusTable Definition -- ***************************************************************************** h3cDot11sMeshLinkStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sMeshLinkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to represent the status of mesh link." ::= { h3cDot11sMeshStatusGroup 1 } h3cDot11sMeshLinkStatusEntry OBJECT-TYPE SYNTAX H3cDot11sMeshLinkStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains status information of mesh link." INDEX { h3cDot11sMeshLinkIfIndex } ::= { h3cDot11sMeshLinkStatusTable 1 } H3cDot11sMeshLinkStatusEntry ::= SEQUENCE { h3cDot11sMeshLinkIfIndex Unsigned32, h3cDot11sMeshLinkName OCTET STRING, h3cDot11sMeshLinkBSSID MacAddress, h3cDot11sMeshLinkPeerMac MacAddress, h3cDot11sMeshLinkExistDuration Integer32 } h3cDot11sMeshLinkIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the interface index of the mesh link." ::= { h3cDot11sMeshLinkStatusEntry 1 } h3cDot11sMeshLinkName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the name of the mesh link." ::= { h3cDot11sMeshLinkStatusEntry 2 } h3cDot11sMeshLinkBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the BSS ID of the mesh link." ::= { h3cDot11sMeshLinkStatusEntry 3 } h3cDot11sMeshLinkPeerMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the peer MAC address of the mesh link." ::= { h3cDot11sMeshLinkStatusEntry 4 } h3cDot11sMeshLinkExistDuration OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the time for which the link has been up." ::= { h3cDot11sMeshLinkStatusEntry 5 } -- ***************************************************************************** -- * End of h3cDot11sMeshLinkStatusTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sMeshLinkStatisTable Definition -- ***************************************************************************** h3cDot11sMeshLinkStatisTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sMeshLinkStatisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to represent the statistical information of mesh link." ::= { h3cDot11sMeshStatusGroup 2 } h3cDot11sMeshLinkStatisEntry OBJECT-TYPE SYNTAX H3cDot11sMeshLinkStatisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains statistical information of mesh link." INDEX { h3cDot11APElementIndex, h3cDot11sMeshLinkStatIfIndex } ::= { h3cDot11sMeshLinkStatisTable 1 } H3cDot11sMeshLinkStatisEntry ::= SEQUENCE { h3cDot11sMeshLinkStatIfIndex Unsigned32, h3cDot11sMeshLinkNbrIndex Unsigned32, h3cDot11sMeshLinkRxTotByte Counter32, h3cDot11sMeshLinkRxTotPkt Counter32, h3cDot11sMeshLinkRxUniPkt Counter32, h3cDot11sMeshLinkRxBrocPkt Counter32, h3cDot11sMeshLinkRxMuticPkt Counter32, h3cDot11sMeshLinkRxDiscPkt Counter32, h3cDot11sMeshLinkTxTotByte Counter32, h3cDot11sMeshLinkTxTotPkt Counter32, h3cDot11sMeshLinkTxUniPkt Counter32, h3cDot11sMeshLinkTxBrocPkt Counter32, h3cDot11sMeshLinkTxMuticPkt Counter32, h3cDot11sMeshLinkTxDiscPkt Counter32, h3cDot11sMeshLinkIFName OCTET STRING } h3cDot11sMeshLinkStatIfIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents the interface index of the mesh link." ::= { h3cDot11sMeshLinkStatisEntry 1 } h3cDot11sMeshLinkNbrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the neighbor index of the mesh link." ::= { h3cDot11sMeshLinkStatisEntry 2 } h3cDot11sMeshLinkRxTotByte OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of bytes that the mesh link received." ::= { h3cDot11sMeshLinkStatisEntry 3 } h3cDot11sMeshLinkRxTotPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of packets that the mesh link received." ::= { h3cDot11sMeshLinkStatisEntry 4 } h3cDot11sMeshLinkRxUniPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of unicast packets that the mesh link received." ::= { h3cDot11sMeshLinkStatisEntry 5 } h3cDot11sMeshLinkRxBrocPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of broadcast packets that the mesh link received." ::= { h3cDot11sMeshLinkStatisEntry 6 } h3cDot11sMeshLinkRxMuticPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of multicast packets that the mesh link received." ::= { h3cDot11sMeshLinkStatisEntry 7 } h3cDot11sMeshLinkRxDiscPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of packets that the mesh link discarded." ::= { h3cDot11sMeshLinkStatisEntry 8 } h3cDot11sMeshLinkTxTotByte OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the total amount of bytes that the mesh link transmitted." ::= { h3cDot11sMeshLinkStatisEntry 9 } h3cDot11sMeshLinkTxTotPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the total amount of packets that the mesh link transmitted." ::= { h3cDot11sMeshLinkStatisEntry 10 } h3cDot11sMeshLinkTxUniPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of unicast packets that the mesh link transmitted." ::= { h3cDot11sMeshLinkStatisEntry 11 } h3cDot11sMeshLinkTxBrocPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of broadcast packets that the mesh link transmitted." ::= { h3cDot11sMeshLinkStatisEntry 12 } h3cDot11sMeshLinkTxMuticPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of multicast packets that the mesh link transmitted." ::= { h3cDot11sMeshLinkStatisEntry 13 } h3cDot11sMeshLinkTxDiscPkt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the amount of discarded packets that the mesh link transmitted." ::= { h3cDot11sMeshLinkStatisEntry 14 } h3cDot11sMeshLinkIFName OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the name of mesh link interface." ::= { h3cDot11sMeshLinkStatisEntry 15 } -- ***************************************************************************** -- * End of h3cDot11sMeshLinkStatisTable Definition -- ***************************************************************************** -- ***************************************************************************** -- * h3cDot11sMeshNbrStatusTable Definition -- ***************************************************************************** h3cDot11sMeshNbrStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF H3cDot11sMeshNbrStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table represents the status information for the neighbors of MP." ::= { h3cDot11sMeshStatusGroup 3 } h3cDot11sMeshNbrStatusEntry OBJECT-TYPE SYNTAX H3cDot11sMeshNbrStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry of the table will provide status information for the neighbors of MP." INDEX { h3cDot11APElementIndex, h3cDot11sMeshNbrIndex } ::= { h3cDot11sMeshNbrStatusTable 1 } H3cDot11sMeshNbrStatusEntry ::= SEQUENCE { h3cDot11sMeshNbrIndex Unsigned32, h3cDot11sMeshNbrRadioID Unsigned32, h3cDot11sMeshLocalMeshID OCTET STRING, h3cDot11sMeshNbrMeshID OCTET STRING, h3cDot11sMeshNbrBSSID MacAddress, h3cDot11sMeshNbrPeerMac MacAddress, h3cDot11sMeshLinkInMp Unsigned32, h3cDot11sMeshMPLinkStatus INTEGER, h3cDot11sMeshNbrChannel Unsigned32, h3cDot11sMeshNbrLinkDuration Integer32, h3cDot11sMeshNbrRSSI Integer32, h3cDot11sMeshNbrSNR Integer32 } h3cDot11sMeshNbrIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents the index for the neighbor." ::= { h3cDot11sMeshNbrStatusEntry 1 } h3cDot11sMeshNbrRadioID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the radio ID of the neighbor." ::= { h3cDot11sMeshNbrStatusEntry 2 } h3cDot11sMeshLocalMeshID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the local mesh ID." ::= { h3cDot11sMeshNbrStatusEntry 3 } h3cDot11sMeshNbrMeshID OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the mesh ID of the neighbor." ::= { h3cDot11sMeshNbrStatusEntry 4 } h3cDot11sMeshNbrBSSID OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the BSS ID of the neighbor." ::= { h3cDot11sMeshNbrStatusEntry 5 } h3cDot11sMeshNbrPeerMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the MAC address of the peer neighbor." ::= { h3cDot11sMeshNbrStatusEntry 6 } h3cDot11sMeshLinkInMp OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the interface index of mesh link that used to connect with this neighbor." ::= { h3cDot11sMeshNbrStatusEntry 7 } h3cDot11sMeshMPLinkStatus OBJECT-TYPE SYNTAX INTEGER { processing(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the status of mesh link that used to connect with this neighbor." ::= { h3cDot11sMeshNbrStatusEntry 8 } h3cDot11sMeshNbrChannel OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the channel number used by this neighbor." ::= { h3cDot11sMeshNbrStatusEntry 9 } h3cDot11sMeshNbrLinkDuration OBJECT-TYPE SYNTAX Integer32 UNITS "second" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the duration of mesh link that used to connect with this neighbor." ::= { h3cDot11sMeshNbrStatusEntry 10 } h3cDot11sMeshNbrRSSI OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the RSSI of mesh link that used to connect with this neighbor." ::= { h3cDot11sMeshNbrStatusEntry 11 } h3cDot11sMeshNbrSNR OBJECT-TYPE SYNTAX Integer32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "Represents the SNR of mesh link that used to connect with this neighbor." ::= { h3cDot11sMeshNbrStatusEntry 12 } -- ***************************************************************************** -- * End of h3cDot11sMeshNbrStatusTable Definition -- ***************************************************************************** END