-- ***************************************************************** -- Generic Object MIB -- -- June 2002 -- -- Copyright (c) 1996-2001, 2002 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- -- LAST-UPDATED "200206180000Z" -- DESCRIPTION -- "This MIB Contains objects used in traps. -- These objects are sent in traps with the values -- applicable for objects defined elsewhere. The SNMP -- operations on these objects may not be meaningful -- or SNMP operations may not be supported." -- -- REVISION "200206180000Z" -- DESCRIPTION -- CONTACT-INFO -- " Cisco Systems -- Customer Service -- -- Postal: 170 W Tasman Drive -- San Jose, CA 95134 -- USA -- -- Tel: +1 800 553-NETS -- -- E-mail: cs-wanatm@cisco.com" -- " -- GENERICOBJECT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB cardGeneric FROM BASIS-MIB; genericObjects OBJECT IDENTIFIER ::= { cardGeneric 8} genericLineNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This is the generic line number used in traps. This object cannot be set or read. This object may refer to a T1, T3 or X21 line. (It is a proxy for other objects lineNum, dsx3LineNum and x21LineNum). Currently, the ranges are T1/E1 1..56 T3/E3 1..3 X21 1..4 " ::= { genericObjects 1} genericLineType OBJECT-TYPE SYNTAX INTEGER { -- T1/E1 line types. Refer to the MIB object -- lineType for details regarding the types below. dsx1ESF(1), dsx1D4(2), dsx1E1(3), dsx1E1CRC(4), dsx1E1MF(5), dsx1E1CRC-MF(6), dsx1E1clearchannel(7), -- T3/E3 line types. Refer to the MIB object -- dsx3LineType for details regarding the types below. dsx3CbitParity(51), dsx3g832-g804(52), dsx3m13mode(53), dsx3g751(54), dsx3Unframed(55), e3Unframed(56), -- HSSI line types. Refer to the MIB object -- x21LineType for details regarding the types below. x21dte(101), x21dce(102), -- Sonet line types. Refer to the MIB object -- sonetLineType for details regarding the types below. sonetSts3c(151), sonetStm1(152), sonetSts12c(153), sonetStm4(154) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the generic line type used in traps. This object cannot be set or read. Depending on the value, this object may refer to a T1, T3 or X21 line type. It is a proxy for other objects lineType, dsx3LineType and x21LineType. " ::= { genericObjects 2} genericTimeStamp OBJECT-TYPE SYNTAX DisplayString (SIZE (1..30)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the generic time stamp used in traps. This object cannot be set or read. This object will be used by all new traps to tell the time that a given trap was originated. " ::= { genericObjects 3} END