--============================================================================= -- Copyright (c) 2016 Fujitsu Network Communications, Inc. All Rights Reserved. --============================================================================= FSS-COMMON-LOG DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI DateAndTime, DisplayString, RowPointer FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF fssCommon FROM FSS-COMMON-SMI FCSeverity, FCCondEffect, FCServEffect, FCLocation, FCDirection, FCTimePeriod, FCCondType, FCTcaCondType, FCTcCondType, FCObjectName, FCTrapType, FCStdObjectIndex, FCStdTypeIndex, FCTrapHistIndex FROM FSS-COMMON-TC ; fssLog MODULE-IDENTITY LAST-UPDATED "201601200000Z" ORGANIZATION "Fujitsu Network Communications, Inc." CONTACT-INFO "Fujitsu Technical Assistance Center (FTAC), 1-800-USE-FTAC (1-800-873-3822)" DESCRIPTION "This MIB module contains common condition definitions used throughout the Fujitsu Network Communications, Inc. 1Finity devices." ::= { fssCommon 1000 } -- See FSS-COMMON-SMI.mib --=====================================================================-- -- The FSS-COMMON-LOG.mib provides an SNMP Manager the -- capability to receive and synchronize extraordinary event -- occurences on the agent system. This MIB document provides -- definitions for event notifications and active -- conditions. -- -- These MIB definitions are designed to be used as follows: -- -- Initial Startup and Synchronization -- =================================== -- The Management system retrieves the contents of the -- fssBase, fssStandingAlarmXTable and -- fssTca, which provides a snapshot of -- all of the currently active event conditions on -- the agent system. -- Runtime Monitoring -- ================== -- The Management system accepts Traps of type, fssCondTrap -- and fssTcaTrap, which represent extraordinary events that -- have occured on the agent system. --=====================================================================-- --=====================================================================-- -- Local Textual Conventions --=====================================================================-- --=====================================================================-- -- Base Level Objects --=====================================================================-- fssBase OBJECT IDENTIFIER ::= {fssCommon 500} fssAlarm OBJECT IDENTIFIER ::= {fssCommon 200} fssAlarmCurrent OBJECT IDENTIFIER ::= {fssAlarm 1} fssAlarmTraps OBJECT IDENTIFIER ::= {fssAlarm 100} fssAlarmPrefix OBJECT IDENTIFIER ::= {fssAlarmTraps 0} fssTca OBJECT IDENTIFIER ::= {fssCommon 300} fssTcaTraps OBJECT IDENTIFIER ::= {fssTca 100} fssTcaPrefix OBJECT IDENTIFIER ::= {fssTcaTraps 0} fssTc OBJECT IDENTIFIER ::= {fssCommon 400} fssTcTraps OBJECT IDENTIFIER ::= {fssTc 100} fssTcPrefix OBJECT IDENTIFIER ::= {fssTcTraps 0} --=====================================================================-- -- Common Condition Trap --=====================================================================-- fssCondTrap NOTIFICATION-TYPE OBJECTS { fssTrapObjectName, fssAlarmType, fssAlarmCondEffect, fssAlarmTypeQual, fssTrapTimeStamp, fssAlarmSeverity, fssTrapDescription, fssAlarmServiceEffect } STATUS current DESCRIPTION "This is a generic Trap for reporting conditions." ::= { fssAlarmPrefix 1 } --=====================================================================-- -- Common Condition Scalar Objects for Condition Trap --=====================================================================-- fssCondQual OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A further description of the alarmType. Each product may contain further qualifications on existing conditions or may have their own unique condition types." ::= { fssAlarmTraps 100 } --=====================================================================-- -- Common TCA Condition Trap --=====================================================================-- fssTcaTrap NOTIFICATION-TYPE OBJECTS { fssTrapObjectName, fssTcaType, fssTcaTypeQual, fssTrapTimeStamp, fssTrapDescription, fssTcaMonVal, fssTcaThLev } STATUS current DESCRIPTION "This is a generic Trap for reporting threshold crossing alerts." ::= { fssTcaPrefix 1 } --=====================================================================-- -- Common Condition Scalar Objects for TCA Trap --=====================================================================-- fssTcaCondQual OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A further description of the tcaType. Each product may contain further qualifications on existing conditions or may have their own unique condition types." ::= { fssTcaTraps 100 } --=====================================================================-- -- Common Transient Condition (TC) Trap --=====================================================================-- fssTcTrap NOTIFICATION-TYPE OBJECTS { fssTrapObjectName, fssTcType, fssTcTypeQual, fssTrapTimeStamp, fssTrapDescription } STATUS current DESCRIPTION "This is a generic Trap for reporting transient conditions." ::= { fssTcPrefix 1 } --=====================================================================-- -- Common Condition Scalar Objects for TC Trap --=====================================================================-- fssTcCondQual OBJECT-TYPE SYNTAX Unsigned32(0..4294967295) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A further description of the tcaType. Each product may contain further qualifications on existing conditions or may have their own unique condition types." ::= { fssTcTraps 100 } --=====================================================================-- -- Common Standing Alarm Extension Table --=====================================================================-- fssStandingAlarmXTable OBJECT-TYPE SYNTAX SEQUENCE OF FCStandingAlarmXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains all the currently active standing conditions." ::= { fssAlarmCurrent 1 } fssStandingAlarmXEntry OBJECT-TYPE SYNTAX FCStandingAlarmXEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Active standing conditions entry." INDEX { fssStdAlarmObjectIndex, fssStdAlarmTypeIndex } ::= { fssStandingAlarmXTable 1 } FCStandingAlarmXEntry ::= SEQUENCE { fssStdAlarmObjectIndex FCStdObjectIndex, fssStdAlarmTypeIndex FCStdTypeIndex, fssStdAlarmObjectName FCObjectName, fssStdAlarmType FCCondType, fssStdAlarmSeverity FCSeverity, fssStdAlarmServEffect FCServEffect, fssStdAlarmLocn FCLocation, fssStdAlarmDir FCDirection } fssStdAlarmObjectIndex OBJECT-TYPE SYNTAX FCStdObjectIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A sequencial index, in combination with the fssStdAlarmTypeIndex uniquely identifies a Trap entry in the table." ::= { fssStandingAlarmXEntry 1 } fssStdAlarmTypeIndex OBJECT-TYPE SYNTAX FCStdTypeIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "A sequencial subindex, that sub-divides the fssStdAlarmObjectIndex and uniquely identifies a Trap entry in the table." ::= { fssStandingAlarmXEntry 2 } fssStdAlarmObjectName OBJECT-TYPE SYNTAX FCObjectName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the object." ::= { fssStandingAlarmXEntry 3 } fssStdAlarmType OBJECT-TYPE SYNTAX FCCondType MAX-ACCESS read-only STATUS current DESCRIPTION "The condition type." ::= { fssStandingAlarmXEntry 4 } fssStdAlarmSeverity OBJECT-TYPE SYNTAX FCSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of the condition." ::= { fssStandingAlarmXEntry 5 } fssStdAlarmServEffect OBJECT-TYPE SYNTAX FCServEffect MAX-ACCESS read-only STATUS current DESCRIPTION "The service effect of the standing condition event or transient condition event." ::= { fssStandingAlarmXEntry 6 } fssStdAlarmLocn OBJECT-TYPE SYNTAX FCLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The Location of the alarm." ::= { fssStandingAlarmXEntry 7 } fssStdAlarmDir OBJECT-TYPE SYNTAX FCDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the alarm." ::= { fssStandingAlarmXEntry 8 } --=====================================================================-- -- Common Traps --=====================================================================-- fssTrapObjectName OBJECT-TYPE SYNTAX FCObjectName MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the object generating the trap." ::= { fssBase 1 } fssTrapDescription OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Trap description." ::= { fssBase 2 } fssTrapType OBJECT-TYPE SYNTAX FCTrapType MAX-ACCESS read-only STATUS current DESCRIPTION "The general type of Trap." ::= { fssBase 3 } fssTrapTimeStamp OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object specifies the date and time the Trap was generated." ::= { fssBase 4 } --=====================================================================-- -- Common Alarms --=====================================================================-- fssAlarmType OBJECT-TYPE SYNTAX FCCondType MAX-ACCESS read-only STATUS current DESCRIPTION "The condition type of Trap." ::= { fssAlarm 3 } fssAlarmCondEffect OBJECT-TYPE SYNTAX FCCondEffect MAX-ACCESS read-only STATUS current DESCRIPTION "The effect of the alarm, whether it is standing or transient." ::= { fssAlarm 4 } fssAlarmTypeQual OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Trap Qualifier. which is ." ::= { fssAlarm 5 } fssAlarmLocn OBJECT-TYPE SYNTAX FCLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The location of the Trap." ::= { fssAlarm 6 } fssAlarmDir OBJECT-TYPE SYNTAX FCDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the Trap." ::= { fssAlarm 7 } fssAlarmSeverity OBJECT-TYPE SYNTAX FCSeverity MAX-ACCESS read-only STATUS current DESCRIPTION "The severity of the alarm." ::= { fssAlarm 8 } fssAlarmServiceEffect OBJECT-TYPE SYNTAX FCServEffect MAX-ACCESS read-only STATUS current DESCRIPTION "Service affecting alarm. In general, SA is used when traffic is disrupted and NSA is used when the traffic is not disrupted." ::= { fssAlarm 9 } --=====================================================================-- -- Common TCA scalar objects --=====================================================================-- fssTcaType OBJECT-TYPE SYNTAX FCTcaCondType MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold crossing alert type." ::= { fssTca 1 } fssTcaTypeQual OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Trap Qualifier. which is ." ::= { fssTca 2 } fssTcaCondEffect OBJECT-TYPE SYNTAX FCCondEffect MAX-ACCESS read-only STATUS current DESCRIPTION "The effect of the alarm, whether it is standing or transient." ::= { fssTca 3 } fssTcaLocn OBJECT-TYPE SYNTAX FCLocation MAX-ACCESS read-only STATUS current DESCRIPTION "The location of the Trap." ::= { fssTca 4 } fssTcaDir OBJECT-TYPE SYNTAX FCDirection MAX-ACCESS read-only STATUS current DESCRIPTION "The direction of the Trap." ::= { fssTca 5 } fssTcaMonVal OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The monitored value of the performance monitoring meter which raised the threshold crossing alert." ::= { fssTca 6 } fssTcaThLev OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold value of the performance monitoring meter." ::= { fssTca 7 } fssTcaTimePeriod OBJECT-TYPE SYNTAX FCTimePeriod MAX-ACCESS read-only STATUS current DESCRIPTION "The time period of the performance monitoring meter which raised the threshold crossing alert." ::= { fssTca 8 } --=====================================================================-- -- Common Transient Condition scalar objects --=====================================================================-- fssTcType OBJECT-TYPE SYNTAX FCTcCondType MAX-ACCESS read-only STATUS current DESCRIPTION "The threshold crossing alert type." ::= { fssTc 1 } fssTcTypeQual OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "The Trap Qualifier. which is ." ::= { fssTc 2 } --=====================================================================-- -- Conformance Objects -- --=====================================================================-- fssLogConformance OBJECT IDENTIFIER ::= { fssLog 100 } fssLogGroups OBJECT IDENTIFIER ::= { fssLogConformance 1 } fssLogCompliances OBJECT IDENTIFIER ::= { fssLogConformance 2 } fssLogTrapCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for fss Common Log." MODULE -- this module MANDATORY-GROUPS { fssLogTrapGroup, fssLogNotificationGroup } GROUP fssLogTrapGroup DESCRIPTION "This group is mandatory for those systems which require support for alarm surveillance in the form of SNMP Traps." ::= { fssLogCompliances 1 } fssLogTrapGroup OBJECT-GROUP OBJECTS { fssCondQual } STATUS current DESCRIPTION "These objects contain Trap related information needed for correlating the Trap emission to the Trap history log and product specific Trap type." ::= { fssLogGroups 1 } fssTcaLogTrapGroup OBJECT-GROUP OBJECTS { fssTcaCondQual } STATUS current DESCRIPTION "These objects contain Trap related information needed for correlating the product specific Trap type." ::= { fssLogGroups 2 } fssLogNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { fssCondTrap } STATUS current DESCRIPTION "These Traps represent the basic set of conditions and alarms within the Fujitsu Network Communications, Inc. System." ::= { fssLogGroups 100 } fssTcaLogNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { fssTcaTrap } STATUS current DESCRIPTION "These Traps represent the basic set of threshold crossing alert conditions within the Fujitsu Network Communications, Inc. System." ::= { fssLogGroups 101 } fssTcLogNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { fssTcTrap } STATUS current DESCRIPTION "These Traps represent the basic set of transient conditions and events within the Fujitsu Network Communications, Inc. System." ::= { fssLogGroups 102 } fssLogStandingCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for fss Common Log MIB." MODULE -- this module MANDATORY-GROUPS {fssLogAlarmStandingGroup } GROUP fssLogAlarmStandingGroup DESCRIPTION "This group is mandatory for those systems which require support for alarm synchronization of all active SNMP Traps on the network element." ::= { fssLogCompliances 3 } fssLogAlarmStandingGroup OBJECT-GROUP OBJECTS { fssStdAlarmType, fssStdAlarmSeverity, fssStdAlarmServEffect } STATUS current DESCRIPTION "This group contains the objects which provide basic system level information." ::= { fssLogGroups 7 } END