FOUNDRY-SN-IP-VRRP-MIB DEFINITIONS ::= BEGIN -- Foundry SnRouter Group MIB Release 1.0.0 -- Revision 0 1/7/97 -- Revision 1 6/5/02 -- Revision 2 08/10/02 -- Copyright 1996-97 Foundry Networks, Inc. -- All rights reserved. -- This Foundry Networks SNMP Management Information Base -- Specification embodies Foundry Networks' confidential and -- proprietary intellectual property. Foundry Networks retains all -- title and ownership in the Specification, including any -- revisions. -- This Specification is supplied "AS IS," and Foundry Networks makes -- no warranty, either express or implied, as to the use, -- operation, condition, or performance of the Specification. -- SECTION 1: Top Level Definitions -- Imports IMPORTS IpAddress, Counter FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 ifIndex FROM IF-MIB snVrrp FROM FOUNDRY-SN-ROOT-MIB ; MacAddress ::= OCTET STRING (SIZE(6)) -- This data type is used to model media addresses. For many -- types of media, this will be in a binary representation. -- For example, an ethernet address would be represented as -- a string of 6 octets. snVrrpGlobal OBJECT IDENTIFIER ::= { snVrrp 1 } snVrrpIntf OBJECT IDENTIFIER ::= { snVrrp 2 } snVrrpVirRtr OBJECT IDENTIFIER ::= { snVrrp 3 } snVrrpIntf2 OBJECT IDENTIFIER ::= { snVrrp 4 } snVrrpVirRtr2 OBJECT IDENTIFIER ::= { snVrrp 5 } -- VRRP and VRRP-Extended MIBs -- Section 1: VRRP Global Variables snVrrpGroupOperMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The VRRP is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP enabled(1)...........activate VRRP" ::= { snVrrpGlobal 1 } snVrrpIfStateChangeTrap OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the SNMP agent process is permitted to generate vrrp and vrrpe interface state change traps." DEFVAL { enabled } ::= { snVrrpGlobal 2 } snVrrpIfMaxNumVridPerIntf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum number of VRID per interface." ::= { snVrrpGlobal 3 } snVrrpIfMaxNumVridPerSystem OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the maximum number of VRID per system." ::= { snVrrpGlobal 4 } snVrrpClearVrrpStat OBJECT-TYPE SYNTAX INTEGER { normal(0), clear(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Clear VRRP statistics command." ::= { snVrrpGlobal 5 } snVrrpGroupOperModeVrrpextended OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "The VRRP_extended is configured on this system either enabled or disabled and the default is disabled mode. disabled(0)..........disable VRRP extended enabled(1)...........activate VRRP extended" ::= { snVrrpGlobal 6 } -- Section 2: VRRP Interface Table -- The following table is deprecated by snVrrpIf2Table, which is -- ifIndex based table snVrrpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVrrpIfEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "The VRRP Interface Table describes the interfaces from the viewpoint of VRRP." ::= { snVrrpIntf 1 } snVrrpIfEntry OBJECT-TYPE SYNTAX SnVrrpIfEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "The VRRP Interface Entry describes one interface from the viewpoint of VRRP." INDEX { snVrrpIfPort } ::= { snVrrpIfTable 1 } SnVrrpIfEntry ::= SEQUENCE { snVrrpIfPort INTEGER, snVrrpIfAuthType INTEGER, snVrrpIfAuthPassword OCTET STRING, snVrrpIfRxHeaderErrCnts Counter, snVrrpIfRxAuthTypeErrCnts Counter, snVrrpIfRxAuthPwdMismatchErrCnts Counter, snVrrpIfRxVridErrCnts Counter } snVrrpIfPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The IP port of this VRRP interface." ::= { snVrrpIfEntry 1 } snVrrpIfAuthType OBJECT-TYPE SYNTAX INTEGER { noAuth(0), simpleTextPasswd(1), ipAuthHeader(2) } ACCESS read-write STATUS deprecated DESCRIPTION "The authentication type of this interface." ::= { snVrrpIfEntry 2 } snVrrpIfAuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-write STATUS deprecated DESCRIPTION "The simple text password is allowed if only if the snVrrpIfAuthType type is simpleTextPasswd(1)." ::= { snVrrpIfEntry 3 } snVrrpIfRxHeaderErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received Header error counts in this interface." ::= { snVrrpIfEntry 4 } snVrrpIfRxAuthTypeErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received authentication type error counts in this interface." ::= { snVrrpIfEntry 5 } snVrrpIfRxAuthPwdMismatchErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received authentication password mismatched error counts in this interface." ::= { snVrrpIfEntry 6 } snVrrpIfRxVridErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received unfound VRID error counts in this interface." ::= { snVrrpIfEntry 7 } -- Section 3: VRRP and VRRP-Extended Interface Table, -- this is a modified vrrp/vrrpe interface table with ifIndex. -- NOTE: Protocols VRRPE and VRRP-Extended are one and the same. snVrrpIf2Table OBJECT-TYPE SYNTAX SEQUENCE OF SnVrrpIf2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "The VRRP and VRRPE Interface Table describes the interfaces from the viewpoint of VRRP and VRRPE." ::= { snVrrpIntf2 1 } snVrrpIf2Entry OBJECT-TYPE SYNTAX SnVrrpIf2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "The VRRP and VRRPE Interface Entry describes one interface from the viewpoint of VRRP and VRRPE." INDEX { ifIndex} ::= { snVrrpIf2Table 1 } SnVrrpIf2Entry ::= SEQUENCE { snVrrpIf2AuthType INTEGER, snVrrpIf2AuthPassword OCTET STRING, snVrrpIf2RxHeaderErrCnts Counter, snVrrpIf2RxAuthTypeErrCnts Counter, snVrrpIf2RxAuthPwdMismatchErrCnts Counter, snVrrpIf2RxVridErrCnts Counter } snVrrpIf2AuthType OBJECT-TYPE SYNTAX INTEGER { noAuth(0), simpleTextPasswd(1), ipAuthHeader(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The authentication type of this interface." ::= { snVrrpIf2Entry 1 } snVrrpIf2AuthPassword OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "The simple text password is allowed if only if the snVrrpIf2AuthType type is simpleTextPasswd(1)." ::= { snVrrpIf2Entry 2 } snVrrpIf2RxHeaderErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received Header error counts in this interface." ::= { snVrrpIf2Entry 3 } snVrrpIf2RxAuthTypeErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received authentication type error counts in this interface." ::= { snVrrpIf2Entry 4 } snVrrpIf2RxAuthPwdMismatchErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received authentication password mismatched error counts in this interface." ::= { snVrrpIf2Entry 5 } snVrrpIf2RxVridErrCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received unfound VRID error counts in this interface." ::= { snVrrpIf2Entry 6 } -- Section 4: VRRP virtual Router Configuration Table. -- The VRRP (Virtual Router Redundancy Protocol) Virtual Router Table augments -- with VRRP specific information. -- The following table is deprecated by snVrrpVirRtr2Table, which is -- ifIndex based table snVrrpVirRtrTable OBJECT-TYPE SYNTAX SEQUENCE OF SnVrrpVirRtrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP." ::= { snVrrpVirRtr 1 } snVrrpVirRtrEntry OBJECT-TYPE SYNTAX SnVrrpVirRtrEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "The VRRP virtual router Entry describes one virtual router from the viewpoint of VRRP." INDEX { snVrrpVirRtrPort, snVrrpVirRtrId } ::= { snVrrpVirRtrTable 1 } SnVrrpVirRtrEntry ::= SEQUENCE { snVrrpVirRtrPort INTEGER, snVrrpVirRtrId INTEGER, snVrrpVirRtrOwnership INTEGER, snVrrpVirRtrCfgPriority INTEGER, snVrrpVirRtrTrackPriority INTEGER, snVrrpVirRtrCurrPriority INTEGER, snVrrpVirRtrHelloInt INTEGER, snVrrpVirRtrDeadInt INTEGER, snVrrpVirRtrPreemptMode INTEGER, snVrrpVirRtrState INTEGER, snVrrpVirRtrActivate INTEGER, snVrrpVirRtrIpAddrMask OCTET STRING, snVrrpVirRtrTrackPortMask OCTET STRING, snVrrpVirRtrTrackVifMask OCTET STRING, snVrrpVirRtrRowStatus INTEGER, snVrrpVirRtrRxArpPktDropCnts Counter, snVrrpVirRtrRxIpPktDropCnts Counter, snVrrpVirRtrRxPortMismatchCnts Counter, snVrrpVirRtrRxNumOfIpMismatchCnts Counter, snVrrpVirRtrRxIpMismatchCnts Counter, snVrrpVirRtrRxHelloIntMismatchCnts Counter, snVrrpVirRtrRxPriorityZeroFromMasterCnts Counter, snVrrpVirRtrRxHigherPriorityCnts Counter, snVrrpVirRtrTransToMasterStateCnts Counter, snVrrpVirRtrTransToBackupStateCnts Counter, snVrrpVirRtrCurrDeadInt INTEGER, snVrrpVirRtrTrackPortList OCTET STRING, snVrrpVirRtrTrackVifPortList OCTET STRING } snVrrpVirRtrPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "The IP port of this VRRP interface." ::= { snVrrpVirRtrEntry 1 } snVrrpVirRtrId OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS deprecated DESCRIPTION "One of the virtual router ID of this VRRP interface." ::= { snVrrpVirRtrEntry 2 } snVrrpVirRtrOwnership OBJECT-TYPE SYNTAX INTEGER { incomplete(0), owner(1), backup(2) } ACCESS read-write STATUS deprecated DESCRIPTION "The ownership of this VRRP router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this VRRP router interface." ::= { snVrrpVirRtrEntry 3 } snVrrpVirRtrCfgPriority OBJECT-TYPE SYNTAX INTEGER (3..254) ACCESS read-write STATUS deprecated DESCRIPTION "The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVrrpVirRtrOwnership is set to backup(2)." DEFVAL { 100 } ::= { snVrrpVirRtrEntry 4 } snVrrpVirRtrTrackPriority OBJECT-TYPE SYNTAX INTEGER (1..254) ACCESS read-write STATUS deprecated DESCRIPTION "The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN." ::= { snVrrpVirRtrEntry 5 } snVrrpVirRtrCurrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) ACCESS read-only STATUS deprecated DESCRIPTION "The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN." ::= { snVrrpVirRtrEntry 6 } snVrrpVirRtrHelloInt OBJECT-TYPE SYNTAX INTEGER (1..84) ACCESS read-write STATUS deprecated DESCRIPTION "Time interval between advertisements (seconds)." DEFVAL { 1 } ::= { snVrrpVirRtrEntry 7 } snVrrpVirRtrDeadInt OBJECT-TYPE SYNTAX INTEGER (1..84) ACCESS read-write STATUS deprecated DESCRIPTION "Dead interval (seconds)." DEFVAL { 1 } ::= { snVrrpVirRtrEntry 8 } snVrrpVirRtrPreemptMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS deprecated DESCRIPTION "This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption." DEFVAL { enabled } ::= { snVrrpVirRtrEntry 9 } snVrrpVirRtrState OBJECT-TYPE SYNTAX INTEGER { init(0), master(1), backup(2) } ACCESS read-only STATUS deprecated DESCRIPTION "This object specifies the VRRP Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state." ::= { snVrrpVirRtrEntry 10 } snVrrpVirRtrActivate OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the VRRP Router's activate command as: disabled(0)...deactivate this VRRP Router. enabled(1)....activate this VRRP Router." ::= { snVrrpVirRtrEntry 11 } snVrrpVirRtrIpAddrMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(64)) ACCESS read-write STATUS deprecated DESCRIPTION "The numbers of IP Addresses of this virtual router of this interface." ::= { snVrrpVirRtrEntry 12 } snVrrpVirRtrTrackPortMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..32)) ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the identity of the physical port whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership. The size of the OCTET STRING for Chassis is 32. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackPortList)" ::= { snVrrpVirRtrEntry 13 } snVrrpVirRtrTrackVifMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..512)) ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the identity of the virtual interface whose state is to be monitored. Each bit is a port of the system. Default value is 0. VirRtr this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The Chassis/Stackable router VRRP Track port membership The size of the OCTET STRING for Chassis is 8. The size of the OCTET STRING for Stackable is 4. (It was obsoleted after release 07100, replaced by snVrrpVirRtrTrackVifPortList)" ::= { snVrrpVirRtrEntry 14 } snVrrpVirRtrRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS deprecated DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snVrrpVirRtrEntry 15 } snVrrpVirRtrRxArpPktDropCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received VRRP ARP Packet Drop Counts." ::= { snVrrpVirRtrEntry 16 } snVrrpVirRtrRxIpPktDropCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received VRRP IP Packet Drop Counts." ::= { snVrrpVirRtrEntry 17 } snVrrpVirRtrRxPortMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received VRRP Port mismatching Counts." ::= { snVrrpVirRtrEntry 18 } snVrrpVirRtrRxNumOfIpMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received VRRP Number of IP Addresses mismatching Counts." ::= { snVrrpVirRtrEntry 19 } snVrrpVirRtrRxIpMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The received VRRP IP Address mismatching Counts." ::= { snVrrpVirRtrEntry 20 } snVrrpVirRtrRxHelloIntMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counts of the virtual router interface with hello interval mismatch counts." ::= { snVrrpVirRtrEntry 21 } snVrrpVirRtrRxPriorityZeroFromMasterCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counts of the virtual router interface with Priority zero from the master." ::= { snVrrpVirRtrEntry 22 } snVrrpVirRtrRxHigherPriorityCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counts of the virtual router interface with higher Priority." ::= { snVrrpVirRtrEntry 23 } snVrrpVirRtrTransToMasterStateCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counts of the virtual router interface transition to master state." ::= { snVrrpVirRtrEntry 24 } snVrrpVirRtrTransToBackupStateCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS deprecated DESCRIPTION "The counts of the virtual router interface transition to backup state." ::= { snVrrpVirRtrEntry 25 } snVrrpVirRtrCurrDeadInt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Current Dead interval (in 100 milliseconds)." ::= { snVrrpVirRtrEntry 26 } snVrrpVirRtrTrackPortList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the identity of the physical port whose state is to be monitored. Each port index is a 16-bit integer in big endian order. 8-bit is the slot number, the other 8-bit is the port number. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP physical track port membership." ::= { snVrrpVirRtrEntry 27 } snVrrpVirRtrTrackVifPortList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS deprecated DESCRIPTION "This object specifies the identity of the virtual interface whose state is to be monitored. Each port index is a 16-bit integer in big endian order. Default value is 0 length octet string. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP virtual port track membership." ::= { snVrrpVirRtrEntry 28 } -- Section 5: VRRP and VRRPE Virtual Router Configuration Table, ifIndex based -- The VRRP(Virtual Router Redundancy Protocol, rfc 2338 based, made an -- enhancement!) and VRRPE (Virtual Router Redundancy Protocol foundry extended) -- configuration. -- Added snVrrpVirRtr2CurrDeadInt, snVrrpVirRtr2AdvertiseBackup, SnVrrpVirRtr2VirtualMacAddr -- SnVrrpVirRtr2IpAddrCount, SnVrrpVirRtr2MasterIpAddr as new objects -- and deleted port masks objects and virtual interface track port list. snVrrpVirRtr2Table OBJECT-TYPE SYNTAX SEQUENCE OF SnVrrpVirRtr2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe." ::= { snVrrpVirRtr2 1 } snVrrpVirRtr2Entry OBJECT-TYPE SYNTAX SnVrrpVirRtr2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Vrrp and Vrrpe virtual router Entry describes one virtual router from the viewpoint of Vrrp and Vrrpe." INDEX { ifIndex, snVrrpVirRtr2Id } ::= { snVrrpVirRtr2Table 1 } SnVrrpVirRtr2Entry ::= SEQUENCE { snVrrpVirRtr2Id INTEGER, snVrrpVirRtr2Ownership INTEGER, snVrrpVirRtr2CfgPriority INTEGER, snVrrpVirRtr2TrackPriority INTEGER, snVrrpVirRtr2CurrPriority INTEGER, snVrrpVirRtr2HelloInt INTEGER, snVrrpVirRtr2DeadInt INTEGER, snVrrpVirRtr2PreemptMode INTEGER, snVrrpVirRtr2State INTEGER, snVrrpVirRtr2IpAddrMask OCTET STRING, snVrrpVirRtr2Activate INTEGER, snVrrpVirRtr2BackupInt INTEGER, snVrrpVirRtr2RowStatus INTEGER, snVrrpVirRtr2RxArpPktDropCnts Counter, snVrrpVirRtr2RxIpPktDropCnts Counter, snVrrpVirRtr2RxPortMismatchCnts Counter, snVrrpVirRtr2RxNumOfIpMismatchCnts Counter, snVrrpVirRtr2RxIpMismatchCnts Counter, snVrrpVirRtr2RxHelloIntMismatchCnts Counter, snVrrpVirRtr2RxPriorityZeroFromMasterCnts Counter, snVrrpVirRtr2RxHigherPriorityCnts Counter, snVrrpVirRtr2TransToMasterStateCnts Counter, snVrrpVirRtr2TransToBackupStateCnts Counter, snVrrpVirRtr2CurrDeadInt INTEGER, snVrrpVirRtr2TrackPortList OCTET STRING, snVrrpVirRtr2AdvertiseBackup INTEGER, snVrrpVirRtr2MasterIpAddr IpAddress, snVrrpVirRtr2IpAddrCount INTEGER, snVrrpVirRtr2VirtualMacAddr MacAddress } snVrrpVirRtr2Id OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "One of the virtual router ID of this Vrrp and Vrrpe interface." ::= { snVrrpVirRtr2Entry 1 } snVrrpVirRtr2Ownership OBJECT-TYPE SYNTAX INTEGER { incomplete(0), owner(1), backup(2) } ACCESS read-write STATUS mandatory DESCRIPTION "The ownership of this Vrrp router interface can be set either owner(1) or backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this Vrrp router interface. vrrpe protocol has no owner(1), can only be set to backup(2) or incomplete(0)." ::= { snVrrpVirRtr2Entry 2 } snVrrpVirRtr2CfgPriority OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is only for VRRP - owner. Not valid for number to configure VRRPE." DEFVAL { 100 } ::= { snVrrpVirRtr2Entry 3 } snVrrpVirRtr2TrackPriority OBJECT-TYPE SYNTAX INTEGER (1..254) ACCESS read-write STATUS mandatory DESCRIPTION "The higher the number the higher the priority is. after this object is configured, the snVrrpVirRtr2CurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN." ::= { snVrrpVirRtr2Entry 4 } snVrrpVirRtr2CurrPriority OBJECT-TYPE SYNTAX INTEGER (1..254) ACCESS read-only STATUS mandatory DESCRIPTION "The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN." ::= { snVrrpVirRtr2Entry 5 } snVrrpVirRtr2HelloInt OBJECT-TYPE SYNTAX INTEGER (1..84) ACCESS read-write STATUS mandatory DESCRIPTION "Time interval between advertisements (seconds)." DEFVAL { 1 } ::= { snVrrpVirRtr2Entry 6 } snVrrpVirRtr2DeadInt OBJECT-TYPE SYNTAX INTEGER (0..84) ACCESS read-write STATUS mandatory DESCRIPTION "Dead interval (seconds)." DEFVAL { 1 } ::= { snVrrpVirRtr2Entry 7 } snVrrpVirRtr2PreemptMode OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption." DEFVAL { enabled } ::= { snVrrpVirRtr2Entry 8 } snVrrpVirRtr2State OBJECT-TYPE SYNTAX INTEGER { init(0), master(1), backup(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object specifies the Vrrp and vrrpe Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state." ::= { snVrrpVirRtr2Entry 9} snVrrpVirRtr2IpAddrMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE(4..64)) ACCESS read-write STATUS mandatory DESCRIPTION "The numbers of IP Addresses of this virtual router of this interface." ::= { snVrrpVirRtr2Entry 10 } snVrrpVirRtr2Activate OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the Vrrp Router's activate command as: disabled(0)...deactivate this Vrrp and Vrrpe Routers. enabled(1)....activate this Vrrp and Vrrpe Routers." ::= { snVrrpVirRtr2Entry 11 } snVrrpVirRtr2BackupInt OBJECT-TYPE SYNTAX INTEGER (60..3600) ACCESS read-write STATUS mandatory DESCRIPTION "Time interval between backup routers hello message advertisements (seconds)." DEFVAL { 60 } ::= { snVrrpVirRtr2Entry 12 } snVrrpVirRtr2RowStatus OBJECT-TYPE SYNTAX INTEGER { invalid(1), valid(2), delete(3), create(4), modify(5) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid" ::= { snVrrpVirRtr2Entry 13 } snVrrpVirRtr2RxArpPktDropCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received Vrrp and Vrrpe ARP Packet Drop Counts." ::= { snVrrpVirRtr2Entry 14 } snVrrpVirRtr2RxIpPktDropCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received Vrrp and Vrrpe IP Packet Drop Counts." ::= { snVrrpVirRtr2Entry 15 } snVrrpVirRtr2RxPortMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received Vrrp and Vrrpe Port mismatching Counts." ::= { snVrrpVirRtr2Entry 16 } snVrrpVirRtr2RxNumOfIpMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received Vrrp and Vrrpe Number of IP Addresses mismatching Counts." ::= { snVrrpVirRtr2Entry 17 } snVrrpVirRtr2RxIpMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The received Vrrp and Vrrpe IP Address mismatching Counts." ::= { snVrrpVirRtr2Entry 18 } snVrrpVirRtr2RxHelloIntMismatchCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counts of the virtual router interface with hello interval mismatch counts." ::= { snVrrpVirRtr2Entry 19 } snVrrpVirRtr2RxPriorityZeroFromMasterCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counts of the virtual router interface with Priority zero from the master." ::= { snVrrpVirRtr2Entry 20 } snVrrpVirRtr2RxHigherPriorityCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counts of the virtual router interface with higher Priority." ::= { snVrrpVirRtr2Entry 21 } snVrrpVirRtr2TransToMasterStateCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counts of the virtual router interface transition to master state." ::= { snVrrpVirRtr2Entry 22 } snVrrpVirRtr2TransToBackupStateCnts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The counts of the virtual router interface transition to backup state." ::= { snVrrpVirRtr2Entry 23 } snVrrpVirRtr2CurrDeadInt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current Dead interval (in 100 milliseconds)." ::= { snVrrpVirRtr2Entry 24 } snVrrpVirRtr2TrackPortList OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VRRP and VRRP-E physical track port membership." ::= { snVrrpVirRtr2Entry 25 } snVrrpVirRtr2AdvertiseBackup OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "Set Advertise this backup router to master " DEFVAL { disabled } ::= { snVrrpVirRtr2Entry 26 } snVrrpVirRtr2MasterIpAddr OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The master router's real/virtual (primary) IP address. This is the IP address listed as the source in VRRP and VRRPE advertisement last received by this virtual router." ::= { snVrrpVirRtr2Entry 27 } snVrrpVirRtr2IpAddrCount OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair." ::= { snVrrpVirRtr2Entry 28 } snVrrpVirRtr2VirtualMacAddr OBJECT-TYPE SYNTAX MacAddress ACCESS read-only STATUS mandatory DESCRIPTION "The virtual MAC address of the virtual router. Although this object can be derived from the 'snVrrpVirRtr2VrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps." ::= { snVrrpVirRtr2Entry 29 } END