FOUNDRY-POE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI -- [RFC2578] DisplayString FROM SNMPv2-TC -- [RFC2579] InterfaceIndex FROM IF-MIB snAgentSys FROM FOUNDRY-SN-ROOT-MIB ; snAgentPoe MODULE-IDENTITY LAST-UPDATED "201006020000Z" -- 04 June 2010 ORGANIZATION "Brocade Communications Systems, Inc." CONTACT-INFO "Technical Support Center 130 Holger Way, San Jose, CA 95134 Email: ipsupport@brocade.com Phone: 1-800-752-8061 URL: www.brocade.com" DESCRIPTION "The Brocade proprietary MIB module for Power Over Ethernet(PoE) It has PoE port and module configuring information. Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions. This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment." REVISION "201006020000Z" -- 04 June 2010 DESCRIPTION "Changed the ORGANIZATION, CONTACT-INFO and DESCRIPTION fields." REVISION "200909300000Z" -- September 30, 2009 DESCRIPTION "Changed INTEGER to Integer32" REVISION "200904030000Z" -- 3 April 2009 DESCRIPTION "Initial version, snAgentPoePortTable which was in SNMPv1 written in SNMPv2-SMI." ::= { snAgentSys 14 } -- Power Over Ethernet MIB Group snAgentPoeGbl OBJECT IDENTIFIER ::= { snAgentPoe 1 } snAgentPoePort OBJECT IDENTIFIER ::= { snAgentPoe 2 } snAgentPoeModule OBJECT IDENTIFIER ::= { snAgentPoe 3 } snAgentPoeUnit OBJECT IDENTIFIER ::= { snAgentPoe 4 } -- Power Over Ethernet Global Objects snAgentPoeGblPowerCapacityTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the total inline power capacity available in the device, measured in mWatts. " ::= { snAgentPoeGbl 1 } snAgentPoeGblPowerCapacityFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the inline power capacity currently available in the device which is unallocated, measured in mWatts." ::= { snAgentPoeGbl 2 } snAgentPoeGblPowerAllocationsRequestsHonored OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows number of times the inline power allocations requests honored." ::= { snAgentPoeGbl 3} -- Power Over Ethernet Port Table snAgentPoePortTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of POE port information." ::= { snAgentPoePort 2 } snAgentPoePortEntry OBJECT-TYPE SYNTAX SnAgentPoePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the POE port table." INDEX { snAgentPoePortNumber } ::= { snAgentPoePortTable 1 } SnAgentPoePortEntry ::= SEQUENCE { snAgentPoePortNumber InterfaceIndex, snAgentPoePortControl INTEGER, snAgentPoePortWattage Integer32, snAgentPoePortClass Integer32, snAgentPoePortPriority INTEGER, snAgentPoePortConsumed Integer32, snAgentPoePortType DisplayString } snAgentPoePortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The port number in ifIndex value." ::= { snAgentPoePortEntry 1 } snAgentPoePortControl OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3), enableLegacyDevice(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Control inline power on/off to a port. If a port does not have inline power capability, reading this object returns 'other(1)'." ::= { snAgentPoePortEntry 2 } snAgentPoePortWattage OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Adjust the inline power wattage. Valid value between 1000 to 15400(IEEE802_3AF)/30000(IEEE802_3AT). Each unit is milliwatts. This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value." ::= { snAgentPoePortEntry 3 } snAgentPoePortClass OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-create STATUS current DESCRIPTION "Adjust the inline power class. Valid value between 0 to 3(IEEE802_3AF)/4(IEEE802_3AT). This object can only be set after snSwIfInLinePowerControl has been set to 'enable(3)' or 'enableLegacyDevice(4)'. If a port does not have inline power capability, reading this object returns undefined value." ::= { snAgentPoePortEntry 4 } snAgentPoePortPriority OBJECT-TYPE SYNTAX INTEGER { invalid(0), critical(1), high(2), low(3), medium(4), other(5) } MAX-ACCESS read-create STATUS current DESCRIPTION "Inline power allocation priority for the power device 0- Not a POE port, 1- Critical, 2- High, 3- Low, 4- Medium, 5- other." ::= { snAgentPoePortEntry 5 } snAgentPoePortConsumed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Inline power consumed by the port. Each unit is milliwatts." ::= { snAgentPoePortEntry 6 } snAgentPoePortType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Inline Power device type 802.3af, 802.3at or Legacy device." ::= { snAgentPoePortEntry 7 } -- Power Over Module Table snAgentPoeModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoeModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of POE Module configuration." ::= { snAgentPoeModule 1 } snAgentPoeModuleEntry OBJECT-TYPE SYNTAX SnAgentPoeModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the POE Module table." INDEX { snAgentPoeModuleNumber } ::= { snAgentPoeModuleTable 1 } SnAgentPoeModuleEntry ::= SEQUENCE { snAgentPoeModuleNumber Unsigned32, snAgentPoeModuleBudget Unsigned32, snAgentPoeModuleMaxPDTypeSupport INTEGER } snAgentPoeModuleNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This objects talks about POE module number." ::= { snAgentPoeModuleEntry 1 } snAgentPoeModuleBudget OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "This objects talks about module power budget in watts." ::= { snAgentPoeModuleEntry 2 } snAgentPoeModuleMaxPDTypeSupport OBJECT-TYPE SYNTAX INTEGER { ieee802dot3af(0), ieee802dot3at(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object talks about the POE module type which is capable to support Power Device (PD) type ieee802.3af or ieee802.3at(also called POE plus)type. Module which support ieee802.3at can also support ieee802.3af but reverse is not true." ::= { snAgentPoeModuleEntry 3 } -- Power Over Unit Table (stacking system) snAgentPoeUnitTable OBJECT-TYPE SYNTAX SEQUENCE OF SnAgentPoeUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of POE informaion for each unit. Only the unit that has POE capability appears in a table row" ::= { snAgentPoeUnit 1 } snAgentPoeUnitEntry OBJECT-TYPE SYNTAX SnAgentPoeUnitEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A row in the POE Unit table." INDEX { snAgentPoeUnitIndex } ::= { snAgentPoeUnitTable 1 } SnAgentPoeUnitEntry ::= SEQUENCE { snAgentPoeUnitIndex Unsigned32, snAgentPoeUnitPowerCapacityTotal Unsigned32, snAgentPoeUnitPowerCapacityFree Unsigned32, snAgentPoeUnitPowerAllocationsRequestsHonored Unsigned32 } snAgentPoeUnitIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Index to POE unit Table." ::= { snAgentPoeUnitEntry 1 } snAgentPoeUnitPowerCapacityTotal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the total inline power capacity available on that unit (device), measured in mWatts. " ::= { snAgentPoeUnitEntry 2 } snAgentPoeUnitPowerCapacityFree OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the inline power capacity currently available on that unit (device) which is unallocated, measured in mWatts." ::= { snAgentPoeUnitEntry 3 } snAgentPoeUnitPowerAllocationsRequestsHonored OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows number of times the inline power allocations requests honored on that unit (device)." ::= { snAgentPoeUnitEntry 4} END