-- ***************************************************************** -- FORCE10-MONITORING-MIB -- -- -- Copyright (c) 2003-2004 by Force10 Networks, Inc. -- All rights reserved. -- ***************************************************************** -- FORCE10-MONITORING-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter64, Unsigned32 FROM SNMPv2-SMI OBJECT-GROUP FROM SNMPv2-CONF TruthValue, TEXTUAL-CONVENTION, DisplayString, MacAddress FROM SNMPv2-TC ifIndex FROM RFC1213-MIB f10Mgmt FROM FORCE10-SMI F10VlanID, F10QueueID, F10PortPipeID, F10SlotID, F10CycloneVersion, F10ProcessorModuleType FROM FORCE10-TC ; f10MonitoringMib MODULE-IDENTITY LAST-UPDATED "200812181200Z" ORGANIZATION "Force10 Networks, Inc." CONTACT-INFO "Force10 Networks, Inc 1440 McCarthy Blvd Milpitas, CA 95035 (408) 571-3500 support@force10networks.com http://www.force10networks.com" DESCRIPTION "Force10 Monitoring MIB provides statistics and accounting for various Force10 products. " -- revision history REVISION "200812181200Z" DESCRIPTION "Force10 Monitoring MIB version 1.3 Added CPU Ingress Queue Unicast Statistics table. " REVISION "0601200000Z" DESCRIPTION "Force10 Monitoring MIB version 1.2 Added IP and ARP statistic objects that are not available in RFC1213. " REVISION "200011021030Z" DESCRIPTION "Force10 Monitoring MIB version 1.1" ::= { f10Mgmt 3 } f10MonGroup OBJECT IDENTIFIER ::= { f10MonitoringMib 1 } f10MonQueue OBJECT IDENTIFIER ::= { f10MonitoringMib 2 } f10MonMac OBJECT IDENTIFIER ::= { f10MonitoringMib 3 } f10MonIfQueue OBJECT IDENTIFIER ::= { f10MonitoringMib 4 } f10NetworkStat OBJECT IDENTIFIER ::= { f10MonitoringMib 5 } f10IpStatistic OBJECT IDENTIFIER ::= { f10NetworkStat 1 } f10ArpStatistic OBJECT IDENTIFIER ::= { f10NetworkStat 2 } -- -- The F10MonGroup -- f10MonMibVersion OBJECT-TYPE SYNTAX INTEGER { version1(1), version1dot1(2), version1dot2(3) } MAX-ACCESS read-only STATUS current DESCRIPTION " version1(1) - initial version, define QOS Queue Statistics table. version1dot1(2) - support MAC Accounting (f10MonMac). version1dot2(3) - support Interface Queue Statistics Tables (f10MonIfQueue). " ::= { f10MonGroup 1 } -- -- The Force10 QOS Queue Group -- f10MonQueueGroup OBJECT IDENTIFIER ::= { f10MonQueue 1 } f10MonMaxQueue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of Force10 QOS queue supported by Force10 Interfaces. " ::= { f10MonQueueGroup 1 } -- -- QOS Input Queue Statistics Table -- f10InQueueStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF F10InQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Force10 QOS Input Queue Statistics Table. This table provides Input Queue statistics for Force10 Interfaces. " ::= { f10MonQueue 2 } f10InQueueStatisticsEntry OBJECT-TYPE SYNTAX F10InQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Force10 QOS Input Queue table. The Input Queue Statistics Table is indexed by the Interface and the Queue ID. The Interface index should be an valid ifIndex as defined in the RFC1213 MIB II Interface Table and the Queue ID should be a valid Force10 Queue ID. " INDEX { ifIndex, f10InQueueId } ::= { f10InQueueStatisticsTable 1 } F10InQueueStatisticsEntry ::= SEQUENCE { f10InQueueId F10QueueID, f10InQueueDropPackets Counter64, f10InQueueBytes Counter64, f10InQueueMatchPackets Counter64, f10InQueueMatchBytes Counter64, f10InQueueMatchBps Counter64, f10InQueueCycloneVersion F10CycloneVersion, f10InQueueBytesCount Counter64, f10InQueuePktsCount Counter64 } f10InQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the second index of this table, it must be a valid Force10 QOS Queue ID. " ::= { f10InQueueStatisticsEntry 1 } f10InQueueDropPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10InQueueStatisticsEntry 2 } f10InQueueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10InQueueStatisticsEntry 3 } f10InQueueMatchPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10InQueueStatisticsEntry 4 } f10InQueueMatchBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10InQueueStatisticsEntry 5 } f10InQueueMatchBps OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10InQueueStatisticsEntry 6 } f10InQueueCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version. " ::= { f10InQueueStatisticsEntry 7 } f10InQueueBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 2.0 (C2T2) hardware only. " ::= { f10InQueueStatisticsEntry 8 } f10InQueuePktsCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of packets passing through this queue. This object is available on Cyclone version 2.0 (C2T2) hardware only. " ::= { f10InQueueStatisticsEntry 9 } -- -- QOS Output Queue Statistics Table -- f10OutQueueStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF F10OutQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Force10 QOS Output Queue Statistics Table. This table provides Output Queue statistics for Force10 Interfaces. " ::= { f10MonQueue 3 } f10OutQueueStatisticsEntry OBJECT-TYPE SYNTAX F10OutQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Output Queue table. The Output Queue Statistics Table is indexed by the Interface and the Queue ID. The Interface index should be an valid ifIndex as defined in the RFC1213 MIB II Interface Table and the the Queue ID should be a valid Force10 Queue ID. " INDEX { ifIndex, f10OutQueueId } ::= { f10OutQueueStatisticsTable 1 } F10OutQueueStatisticsEntry ::= SEQUENCE { f10OutQueueId F10QueueID, f10OutQueuePackets Counter64, f10OutQueueBytes Counter64, f10OutQueueBps Counter64, f10OutQueueCycloneVersion F10CycloneVersion, f10OutQueueBytesCount Counter64 } f10OutQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the second index of this table, it must be a valid Force10 QOS Queue ID. " ::= { f10OutQueueStatisticsEntry 1 } f10OutQueuePackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10OutQueueStatisticsEntry 2 } f10OutQueueBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes in the queue. This object is available on Cyclone version 1.5 (CjTj) hardware only. " ::= { f10OutQueueStatisticsEntry 3 } f10OutQueueBps OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10OutQueueStatisticsEntry 4 } f10OutQueueCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version. " ::= { f10OutQueueStatisticsEntry 5 } f10OutQueueBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 2.0 (C2T2) hardware only. " ::= { f10OutQueueStatisticsEntry 6 } -- -- QOS WRED Statistics Table -- f10WredStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF F10WredStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "QOS WRED Statistics Table This table provides QOS WRED statistics for the Force10 Interfaces. " ::= { f10MonQueue 4 } f10WredStatisticsEntry OBJECT-TYPE SYNTAX F10WredStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the WRED Statistics table. The WRED Statistics Table is indexed by the Interface and the Queue ID. The Interface index should be an valid ifIndex as defined in the RFC1213 MIB II Interface Table and the Queue ID should be a valid Force10 Queue ID. " INDEX { ifIndex, f10WredQueueId } ::= { f10WredStatisticsTable 1 } F10WredStatisticsEntry ::= SEQUENCE { f10WredQueueId F10QueueID, f10WredGreenName DisplayString, f10WredGreenThresholdLow Unsigned32, f10WredGreenThresholdHigh Unsigned32, f10WredGreenDropPackets Counter64, f10WredGreenReserve1 Counter64, f10WredGreenReserve2 Counter64, f10WredYellowName DisplayString, f10WredYellowThresholdLow Unsigned32, f10WredYellowThresholdHigh Unsigned32, f10WredYellowDropPackets Counter64, f10WredYellowReserve1 Counter64, f10WredYellowReserve2 Counter64, f10WredRedName DisplayString, f10WredRedThresholdLow Unsigned32, f10WredRedThresholdHigh Unsigned32, f10WredRedDropPackets Counter64, f10WredRedReserve1 Counter64, f10WredRedReserve2 Counter64 } f10WredQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the second index of this table, it must be a valid Force10 QOS Queue ID. " ::= { f10WredStatisticsEntry 1 } f10WredGreenName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 2 } f10WredGreenThresholdLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 3 } f10WredGreenThresholdHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 4 } f10WredGreenDropPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 5 } f10WredGreenReserve1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 6 } f10WredGreenReserve2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 7 } f10WredYellowName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 8 } f10WredYellowThresholdLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 9 } f10WredYellowThresholdHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 10 } f10WredYellowDropPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 11 } f10WredYellowReserve1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 12 } f10WredYellowReserve2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 13 } f10WredRedName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 14 } f10WredRedThresholdLow OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 15 } f10WredRedThresholdHigh OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 16 } f10WredRedDropPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 17 } f10WredRedReserve1 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 18 } f10WredRedReserve2 OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " " ::= { f10WredStatisticsEntry 19 } -- -- The MAC Group -- f10MacGroup OBJECT IDENTIFIER ::= { f10MonMac 1 } -- -- The MAC Accounting Group -- f10MacAccounting OBJECT IDENTIFIER ::= { f10MonMac 2 } -- -- The MAC Accounting Destination Table -- f10MacAccountingDestTable OBJECT-TYPE SYNTAX SEQUENCE OF F10MacAccountingDestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MAC Accounting Destination Table. Each entry in the table provides the MAC accounting statistics from a specific Interface, VLAN ID, and the desired destination MAC Address. " ::= { f10MacAccounting 1 } f10MacAccountingDestEntry OBJECT-TYPE SYNTAX F10MacAccountingDestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the MAC Accounting Destination Table. The MAC Accounting Destination table is indexed by the input Interface, VLAN ID, and the destination MAC Address. " INDEX { f10MacAccInIfIndex, f10MacAccVlan, f10MacAccMacAddr } ::= { f10MacAccountingDestTable 1 } F10MacAccountingDestEntry ::= SEQUENCE { f10MacAccInIfIndex INTEGER, f10MacAccMacAddr MacAddress, f10MacAccVlan F10VlanID, f10MacAccOutIfIndex INTEGER, f10MacAccPackets Counter64, f10MacAccBytes Counter64 } f10MacAccInIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The input Interface of this entry of the table. The value should be a valid ifIndex in the MIB II Interface Table. " ::= { f10MacAccountingDestEntry 1 } f10MacAccVlan OBJECT-TYPE SYNTAX F10VlanID MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID. " ::= { f10MacAccountingDestEntry 2 } f10MacAccMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC Address that identifies this entry of the table. This is the destination MAC Address of the packets that's going through the Interface identified by f10MacAccInIfIndex. " ::= { f10MacAccountingDestEntry 3 } f10MacAccOutIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The output Interface of this entry of the table. The value should be a valid ifIndex in the MIB II Interface Table. " ::= { f10MacAccountingDestEntry 4 } f10MacAccPackets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets going through this entry of the the table, identified by the Interface/MAC/VLAN. " ::= { f10MacAccountingDestEntry 5 } f10MacAccBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes traffic going through this entry of the table, identified by the Interface/MAC/VLAN. " ::= { f10MacAccountingDestEntry 6 } -- -- The Force10 Interface Queue Group -- -- The Interface Queue Statistics Tables shows Queue Statistics of all Force10 -- linecard/interfaces. Please note this is different from the QOS Queue -- Statistics Table which shows the Egress Unicast Statistics and hit counters -- only when a QOS profile is created for the interface. f10MonIfQueueGroup OBJECT IDENTIFIER ::= { f10MonIfQueue 1 } -- -- Ingress Queue Unicast Statistics Table -- f10IngQueueUnicastStatTable OBJECT-TYPE SYNTAX SEQUENCE OF F10IngQueueUnicastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ingress Queue Unicast Statistics Table. This table provides Queue statistics for Ingress Unicast packets between Force10 linecards. " ::= { f10MonIfQueue 2 } f10IngQueueUnicastStatEntry OBJECT-TYPE SYNTAX F10IngQueueUnicastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Ingress Queue Unicast Statistics table. The Ingress Queue Unicast Statistics Table is indexed by the source and destination linecard/portpipe and Queue ID. " INDEX { f10IngUnicastSrcCard, f10IngUnicastDestCard, f10IngUnicastSrcPortPipe, f10IngUnicastDestPortPipe, f10IngUnicastQueueId } ::= { f10IngQueueUnicastStatTable 1 } F10IngQueueUnicastStatEntry ::= SEQUENCE { f10IngUnicastSrcCard F10SlotID, f10IngUnicastDestCard F10SlotID, f10IngUnicastSrcPortPipe F10PortPipeID, f10IngUnicastDestPortPipe F10PortPipeID, f10IngUnicastQueueId F10QueueID, f10IngUnicastCycloneVersion F10CycloneVersion, f10IngUnicastBytes Counter64, f10IngUnicastBytesCount Counter64, f10IngUnicastPacketCount Counter64, f10IngUnicastGreenMin Unsigned32, f10IngUnicastGreenMax Unsigned32, f10IngUnicastGreenDrop Counter64, f10IngUnicastYellowMin Unsigned32, f10IngUnicastYellowMax Unsigned32, f10IngUnicastYellowDrop Counter64, f10IngUnicastRedDrop Counter64 } f10IngUnicastSrcCard OBJECT-TYPE SYNTAX F10SlotID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the source linecard number. This is the first index of this table entry. " ::= { f10IngQueueUnicastStatEntry 1 } f10IngUnicastDestCard OBJECT-TYPE SYNTAX F10SlotID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the destination linecard number. This is the 3rd index of this table entry. " ::= { f10IngQueueUnicastStatEntry 2 } f10IngUnicastSrcPortPipe OBJECT-TYPE SYNTAX F10PortPipeID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Force10 Cyclone PortPipe number of the source linecard. This is the 2nd index of this table entry. " ::= { f10IngQueueUnicastStatEntry 3 } f10IngUnicastDestPortPipe OBJECT-TYPE SYNTAX F10PortPipeID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Force10 Cyclone PortPipe number of the destination linecard. This is the 4th index of this table entry. " ::= { f10IngQueueUnicastStatEntry 4 } f10IngUnicastQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Queue ID of this entry. This is the 5th index of this table entry. " ::= { f10IngQueueUnicastStatEntry 5 } f10IngUnicastCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version. " ::= { f10IngQueueUnicastStatEntry 6 } f10IngUnicastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes in the queue. This object is available on Cyclone version 1.5 (CjTj) hardware only. " ::= { f10IngQueueUnicastStatEntry 7 } f10IngUnicastBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10IngQueueUnicastStatEntry 8 } f10IngUnicastPacketCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of packets passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10IngQueueUnicastStatEntry 9 } f10IngUnicastGreenMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Green packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10IngQueueUnicastStatEntry 10 } f10IngUnicastGreenMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Green packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10IngQueueUnicastStatEntry 11 } f10IngUnicastGreenDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Green packets being dropped in this queue. " ::= { f10IngQueueUnicastStatEntry 12 } f10IngUnicastYellowMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Yellow packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10IngQueueUnicastStatEntry 13 } f10IngUnicastYellowMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Yellow packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10IngQueueUnicastStatEntry 14 } f10IngUnicastYellowDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Yellow packets being dropped in this queue. " ::= { f10IngQueueUnicastStatEntry 15 } f10IngUnicastRedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Red packets being dropped in this queue. " ::= { f10IngQueueUnicastStatEntry 16 } -- -- Ingress Queue Multicast Statistics Table -- f10IngQueueMulticastStatTable OBJECT-TYPE SYNTAX SEQUENCE OF F10IngQueueMulticastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Ingress Queue Multicast Statistics Table. This table provides Queue statistics for Ingress Multicast packets at Force10 linecards. " ::= { f10MonIfQueue 3 } f10IngQueueMulticastStatEntry OBJECT-TYPE SYNTAX F10IngQueueMulticastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Ingress Queue Multicast Statistics table. The Ingress Queue Multicast Statistics Table is indexed by the source linecard/portpipe and Queue ID. " INDEX { f10IngMulticastSrcCard, f10IngMulticastSrcPortPipe, f10IngMulticastQueueId } ::= { f10IngQueueMulticastStatTable 1 } F10IngQueueMulticastStatEntry ::= SEQUENCE { f10IngMulticastSrcCard F10SlotID, f10IngMulticastSrcPortPipe F10PortPipeID, f10IngMulticastQueueId F10QueueID, f10IngMulticastCycloneVersion F10CycloneVersion, f10IngMulticastBytes Counter64, f10IngMulticastBytesCount Counter64, f10IngMulticastPacketCount Counter64, f10IngMulticastGreenMin Unsigned32, f10IngMulticastGreenMax Unsigned32, f10IngMulticastGreenDrop Counter64, f10IngMulticastYellowMin Unsigned32, f10IngMulticastYellowMax Unsigned32, f10IngMulticastYellowDrop Counter64, f10IngMulticastRedDrop Counter64 } f10IngMulticastSrcCard OBJECT-TYPE SYNTAX F10SlotID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the source linecard number. This is the first index of this table entry. " ::= { f10IngQueueMulticastStatEntry 1 } f10IngMulticastSrcPortPipe OBJECT-TYPE SYNTAX F10PortPipeID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Force10 Cyclone PortPipe number of the source linecard. This is the 2nd index of this table entry. " ::= { f10IngQueueMulticastStatEntry 2 } f10IngMulticastQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Queue ID of this entry. This is the 3rd index of this table entry. " ::= { f10IngQueueMulticastStatEntry 3 } f10IngMulticastCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version. " ::= { f10IngQueueMulticastStatEntry 4 } f10IngMulticastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes in the queue. This object is available on Cyclone version 1.5 (CjTj) hardware only. " ::= { f10IngQueueMulticastStatEntry 5 } f10IngMulticastBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10IngQueueMulticastStatEntry 6 } f10IngMulticastPacketCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of packets passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10IngQueueMulticastStatEntry 7 } f10IngMulticastGreenMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Green packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10IngQueueMulticastStatEntry 8 } f10IngMulticastGreenMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Green packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10IngQueueMulticastStatEntry 9 } f10IngMulticastGreenDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Green packets being dropped in this queue. " ::= { f10IngQueueMulticastStatEntry 10 } f10IngMulticastYellowMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Yellow packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10IngQueueMulticastStatEntry 11 } f10IngMulticastYellowMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Yellow packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10IngQueueMulticastStatEntry 12 } f10IngMulticastYellowDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Yellow packets being dropped in this queue. " ::= { f10IngQueueMulticastStatEntry 13 } f10IngMulticastRedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Red packets being dropped in this queue. " ::= { f10IngQueueMulticastStatEntry 14 } -- -- Egress Queue Unicast Statistics Table -- f10EgQueueUnicastStatTable OBJECT-TYPE SYNTAX SEQUENCE OF F10EgQueueUnicastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Egress Queue Unicast Statistics Table. This table provides Queue statistics for Egress Unicast packets at Force10 Interface. " ::= { f10MonIfQueue 4 } f10EgQueueUnicastStatEntry OBJECT-TYPE SYNTAX F10EgQueueUnicastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Egress Queue Unicast Statistics table. The Egress Queue Unicast Statistics Table is indexed by the ifIndex and Queue ID. The IfIndex should be an valid Interface Index as defined in the RFC1213 MIB II Interface Table. " INDEX { ifIndex, f10EgUnicastQueueId } ::= { f10EgQueueUnicastStatTable 1 } F10EgQueueUnicastStatEntry ::= SEQUENCE { f10EgUnicastQueueId F10QueueID, f10EgUnicastCycloneVersion F10CycloneVersion, f10EgUnicastBytes Counter64, f10EgUnicastBytesCount Counter64, f10EgUnicastPacketCount Counter64, f10EgUnicastGreenMin Unsigned32, f10EgUnicastGreenMax Unsigned32, f10EgUnicastGreenDrop Counter64, f10EgUnicastYellowMin Unsigned32, f10EgUnicastYellowMax Unsigned32, f10EgUnicastYellowDrop Counter64, f10EgUnicastRedDrop Counter64 } f10EgUnicastQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Queue ID of this entry. This is the 2nd index of this table entry. " ::= { f10EgQueueUnicastStatEntry 1 } f10EgUnicastCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version. " ::= { f10EgQueueUnicastStatEntry 2 } f10EgUnicastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes in the queue. This object is available on Cyclone version 1.5 (CjTj) hardware only. " ::= { f10EgQueueUnicastStatEntry 3 } f10EgUnicastBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10EgQueueUnicastStatEntry 4 } f10EgUnicastPacketCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of packets passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10EgQueueUnicastStatEntry 5 } f10EgUnicastGreenMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Green packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10EgQueueUnicastStatEntry 6 } f10EgUnicastGreenMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Green packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10EgQueueUnicastStatEntry 7 } f10EgUnicastGreenDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Green packets being dropped in this queue. " ::= { f10EgQueueUnicastStatEntry 8 } f10EgUnicastYellowMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Yellow packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10EgQueueUnicastStatEntry 9 } f10EgUnicastYellowMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Yellow packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10EgQueueUnicastStatEntry 10 } f10EgUnicastYellowDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Yellow packets being dropped in this queue. " ::= { f10EgQueueUnicastStatEntry 11 } f10EgUnicastRedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Red packets being dropped in this queue. " ::= { f10EgQueueUnicastStatEntry 12 } -- -- Egress Queue Multicast Statistics Table -- f10EgQueueMulticastStatTable OBJECT-TYPE SYNTAX SEQUENCE OF F10EgQueueMulticastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Egress Queue Multicast Statistics Table. This table provides Queue statistics for Egress Multicast packets at Force10 Interface. " ::= { f10MonIfQueue 5 } f10EgQueueMulticastStatEntry OBJECT-TYPE SYNTAX F10EgQueueMulticastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Egress Queue Multicast Statistics table. The Egress Queue Multicast Statistics Table is indexed by the ifIndex and Queue ID. The IfIndex should be an valid Interface Index as defined in the RFC1213 MIB II Interface Table. " INDEX { ifIndex, f10EgMulticastQueueId } ::= { f10EgQueueMulticastStatTable 1 } F10EgQueueMulticastStatEntry ::= SEQUENCE { f10EgMulticastQueueId F10QueueID, f10EgMulticastCycloneVersion F10CycloneVersion, f10EgMulticastBytes Counter64, f10EgMulticastBytesCount Counter64, f10EgMulticastPacketCount Counter64, f10EgMulticastGreenMin Unsigned32, f10EgMulticastGreenMax Unsigned32, f10EgMulticastGreenDrop Counter64, f10EgMulticastYellowMin Unsigned32, f10EgMulticastYellowMax Unsigned32, f10EgMulticastYellowDrop Counter64, f10EgMulticastRedDrop Counter64 } f10EgMulticastQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS read-only STATUS current DESCRIPTION "This is the Queue ID of this entry. This is the 2nd index of this table entry. " ::= { f10EgQueueMulticastStatEntry 1 } f10EgMulticastCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version. " ::= { f10EgQueueMulticastStatEntry 2 } f10EgMulticastBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes in the queue. This object is available on Cyclone version 1.5 (CjTj) hardware only. " ::= { f10EgQueueMulticastStatEntry 3 } f10EgMulticastBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10EgQueueMulticastStatEntry 4 } f10EgMulticastPacketCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of packets passing through this queue. This object is available on Cyclone version 2.0 (C2T2) and Cyclone version 3.0 (X3) hardwares only. " ::= { f10EgQueueMulticastStatEntry 5 } f10EgMulticastGreenMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Green packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10EgQueueMulticastStatEntry 6 } f10EgMulticastGreenMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Green packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10EgQueueMulticastStatEntry 7 } f10EgMulticastGreenDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Green packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10EgQueueMulticastStatEntry 8 } f10EgMulticastYellowMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Yellow packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability. " ::= { f10EgQueueMulticastStatEntry 9 } f10EgMulticastYellowMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Yellow packets. The max threshold identifies the queue size level at which tail drops occurs. " ::= { f10EgQueueMulticastStatEntry 10 } f10EgMulticastYellowDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Yellow packets being dropped in this queue. " ::= { f10EgQueueMulticastStatEntry 11 } f10EgMulticastRedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Red packets being dropped in this queue. " ::= { f10EgQueueMulticastStatEntry 12 } -- -- CPU Ingress Queue Unicast Statistics Table - Applicable only for Cyclone version 3.0 and above -- f10CpuIngQueueUnicastStatTable OBJECT-TYPE SYNTAX SEQUENCE OF F10CpuIngQueueUnicastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The CPU Ingress Queue Unicast Statistics Table. This table provides Queue statistics for Ingress Unicast packets destined for CPU." ::= { f10MonIfQueue 6 } f10CpuIngQueueUnicastStatEntry OBJECT-TYPE SYNTAX F10CpuIngQueueUnicastStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the CPU Ingress Queue Unicast Statistics Table. The CPU Ingress Queue Unicast Statistics Table is indexed by the source linecard/portpipe, cpu port and Queue ID." INDEX { f10CpuIngUnicastSrcCard, f10CpuIngUnicastSrcPortPipe, f10CpuIngUnicastDestCpu, f10CpuIngUnicastQueueId } ::= { f10CpuIngQueueUnicastStatTable 1 } F10CpuIngQueueUnicastStatEntry ::= SEQUENCE { f10CpuIngUnicastSrcCard F10SlotID, f10CpuIngUnicastSrcPortPipe F10PortPipeID, f10CpuIngUnicastDestCpu F10ProcessorModuleType, f10CpuIngUnicastQueueId F10QueueID, f10CpuIngUnicastCycloneVersion F10CycloneVersion, f10CpuIngUnicastBytesCount Counter64, f10CpuIngUnicastPacketCount Counter64, f10CpuIngUnicastGreenMin Unsigned32, f10CpuIngUnicastGreenMax Unsigned32, f10CpuIngUnicastGreenDrop Counter64, f10CpuIngUnicastYellowMin Unsigned32, f10CpuIngUnicastYellowMax Unsigned32, f10CpuIngUnicastYellowDrop Counter64, f10CpuIngUnicastRedDrop Counter64 } f10CpuIngUnicastSrcCard OBJECT-TYPE SYNTAX F10SlotID MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the source linecard number. This is the first index of this table entry." ::= { f10CpuIngQueueUnicastStatEntry 1 } f10CpuIngUnicastSrcPortPipe OBJECT-TYPE SYNTAX F10PortPipeID MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the Force10 Cyclone PortPipe number of the source linecard.This is the 2nd index of this table entry." ::= { f10CpuIngQueueUnicastStatEntry 2 } f10CpuIngUnicastDestCpu OBJECT-TYPE SYNTAX F10ProcessorModuleType MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the destination CPU port of this entry. This is the 3rd index of this table entry." ::= { f10CpuIngQueueUnicastStatEntry 3 } f10CpuIngUnicastQueueId OBJECT-TYPE SYNTAX F10QueueID MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is the Queue ID of this entry. This is the 4th index of this table entry." ::= { f10CpuIngQueueUnicastStatEntry 4 } f10CpuIngUnicastCycloneVersion OBJECT-TYPE SYNTAX F10CycloneVersion MAX-ACCESS read-only STATUS current DESCRIPTION "The linecard Cyclone hardware version." ::= { f10CpuIngQueueUnicastStatEntry 5 } f10CpuIngUnicastBytesCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of bytes data passing through this queue. This object is available on Cyclone version 3.0 (X3) hardware only." ::= { f10CpuIngQueueUnicastStatEntry 6 } f10CpuIngUnicastPacketCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The cumulative number of packets passing through this queue. This object is available on Cyclone version 3.0 (X3) hardware only." ::= { f10CpuIngQueueUnicastStatEntry 7 } f10CpuIngUnicastGreenMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Green packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability." ::= { f10CpuIngQueueUnicastStatEntry 8 } f10CpuIngUnicastGreenMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Green packets. The max threshold identifies the queue size level at which tail drops occurs." ::= { f10CpuIngQueueUnicastStatEntry 9 } f10CpuIngUnicastGreenDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Green packets being dropped in this queue." ::= { f10CpuIngQueueUnicastStatEntry 10 } f10CpuIngUnicastYellowMin OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The min threshold for Yellow packets. The min threshold identifies the queue size percentage at which the WRED dropping starts to be applied with a given configured probability." ::= { f10CpuIngQueueUnicastStatEntry 11 } f10CpuIngUnicastYellowMax OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The max threshold for Yellow packets. The max threshold identifies the queue size level at which tail drops occurs." ::= { f10CpuIngQueueUnicastStatEntry 12 } f10CpuIngUnicastYellowDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Yellow packets being dropped in this queue." ::= { f10CpuIngQueueUnicastStatEntry 13 } f10CpuIngUnicastRedDrop OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Red packets being dropped in this queue." ::= { f10CpuIngQueueUnicastStatEntry 14 } -- -- Force10 IP Statistic -- f10BcastPktRecv OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total broadcast packet received. " ::= { f10IpStatistic 1 } f10BcastPktSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total broadcast packet sent. " ::= { f10IpStatistic 2 } f10McastPktRecv OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total multicast packet received. " ::= { f10IpStatistic 3 } f10McastPktSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total multicast packet sent. " ::= { f10IpStatistic 4 } -- -- Force10 ARP Statistic -- f10ArpReqRecv OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ARP request received. " ::= { f10ArpStatistic 1 } f10ArpReqSent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ARP request sent. " ::= { f10ArpStatistic 2 } f10ArpReplyRecv OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ARP reply received. " ::= { f10ArpStatistic 3 } f10ArpReplySent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ARP reply sent. " ::= { f10ArpStatistic 4 } f10ArpProxySent OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total ARP proxy sent. " ::= { f10ArpStatistic 5 } END