-- $Id: FLARION-USERINFO-MIB.txt,v 1.1.2.1 2004/11/01 21:56:19 mkanaka Exp $ FLARION-USERINFO-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, TimeTicks, Unsigned32, Counter32 FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC flarion, FloatAsString FROM FLARION-MIB; rrUserInfo OBJECT IDENTIFIER ::= { flarion 4 } usrSiteInfo OBJECT IDENTIFIER ::= { rrUserInfo 1 } usrSectorInfo OBJECT IDENTIFIER ::= { rrUserInfo 2 } -- -- Site Identity -- siteIdentity OBJECT IDENTIFIER ::= { usrSiteInfo 1 } siteId OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The name given to the basestation by the wireless carrier. The siteId is controlled by the carrier." ::= { siteIdentity 1 } siteName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The site name as chosen by the carrier. The name may be derived from the siteId or from the siteCity." ::= { siteIdentity 2 } siteOwner OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The owner of the basestation." ::= { siteIdentity 3 } siteInstallDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Date of installation of the basestation." ::= { siteIdentity 4 } siteCommissionDate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Date of completing commissioning of the basestation." ::= { siteIdentity 5 } siteOtherInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This field is reserved to store any information that the carrier chooses to use." ::= { siteIdentity 6 } -- -- Site Location -- siteLocation OBJECT IDENTIFIER ::= { usrSiteInfo 2 } siteStreet OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Street address." ::= { siteLocation 1 } siteCity OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "City name." ::= { siteLocation 2 } siteCounty OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "County (if applicable)." ::= { siteLocation 3 } siteState OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "State (if applicable)." ::= { siteLocation 4 } sitePostalLocation OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Zip code or postal code (if applicable)." ::= { siteLocation 5 } siteCountry OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Country." ::= { siteLocation 6 } siteLatitude OBJECT-TYPE SYNTAX FloatAsString MAX-ACCESS read-write STATUS current DESCRIPTION "The site angular distance north or south of the earth's equator, measured in degrees along a meridian." ::= { siteLocation 7 } siteLongitude OBJECT-TYPE SYNTAX FloatAsString MAX-ACCESS read-write STATUS current DESCRIPTION "The site angular distance on the earth's surface, measured east or west and expressed in degrees." ::= { siteLocation 8 } siteGroundElevation OBJECT-TYPE SYNTAX FloatAsString MAX-ACCESS read-write STATUS current DESCRIPTION "The ground elevation of the site, in feet." ::= { siteLocation 9 } -- -- RF Environment -- siteRfEnv OBJECT IDENTIFIER ::= { usrSiteInfo 3 } siteStructureType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The method by which the antenna is mounted in the field. Possible options include monopole, flagpole, self support, water tank, etc." ::= { siteRfEnv 1 } siteAntennaConfig OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate if the basestation antennae are configured as: Sectorized - radiates RF energy in 1,2, or 3 sectors Omni - radiates RF power in all directions Simulcast Low Power - radiates RF energy to each antenna sector by splitting the carrier's signal output after the signal is amplified, thus requiring a single power amplifier Simulcast High Power - radiates the same information to each antenna sector by splitting the carrier's signal output prior to amplification, thus requiring multiple power amplifiers." ::= { siteRfEnv 2 } siteNumSectors OBJECT-TYPE SYNTAX INTEGER (0..3) MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to indicate the number of sectors in the base station. Options are: 0 = omni 1 = one sector 2 = two sectors 3 = three sectors" ::= { siteRfEnv 3 } -- -- Site Connectivity -- siteConnectivity OBJECT IDENTIFIER ::= { usrSiteInfo 4 } siteCluster OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "For EMS management purposes, the network may be divided into clusters. This field identifies the cluster associated with the basestation." ::= { siteConnectivity 1 } siteDomain OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The site domain is used with the siteId to form the hostname of the basestation." ::= { siteConnectivity 2 } -- -- Sector Antenna Information -- sectorAntennaTable OBJECT-TYPE SYNTAX SEQUENCE OF SectorAntennaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { usrSectorInfo 1 } sectorAntennaEntry OBJECT-TYPE SYNTAX SectorAntennaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { secAntIndex } ::= { sectorAntennaTable 1 } SectorAntennaEntry ::= SEQUENCE { secAntIndex INTEGER, secAntName DisplayString, secAntMorphology DisplayString, secAntManufacturer DisplayString, secAntSharing DisplayString, secAntRxDiv TruthValue, secAntSpatialDiv TruthValue, secAntPolarDiv TruthValue, secAntModel DisplayString } secAntIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Sector index." ::= { sectorAntennaEntry 1 } secAntName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Sector name. For example, alpha, beta, gamme, omni." ::= { sectorAntennaEntry 2 } secAntMorphology OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of the RF classification for the coverage area of the sector. Possible values include Rural, Dense Rural, Light Suburban, Suburban, Dense Suburban, Light Urban, Urban, and Dense Urban." ::= { sectorAntennaEntry 3 } secAntManufacturer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Name of the manufacturer of the antenna used in this sector." ::= { sectorAntennaEntry 4 } secAntSharing OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Used to indicate and explain if the antenna is shared with other basestations or other technologies." ::= { sectorAntennaEntry 5 } secAntRxDiv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if two antennae are used in order to obtain diversity." ::= { sectorAntennaEntry 6 } secAntSpatialDiv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if antenna spatial diversity (two antennas physically separated) is used." ::= { sectorAntennaEntry 7 } secAntPolarDiv OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if antenna polarization diversity is used." ::= { sectorAntennaEntry 8 } secAntModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The model number of the antenna." ::= { sectorAntennaEntry 9 } -- -- Sector Antenna Characteristics -- sectorAntennaCharTable OBJECT-TYPE SYNTAX SEQUENCE OF SectorAntennaCharEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { usrSectorInfo 2 } sectorAntennaCharEntry OBJECT-TYPE SYNTAX SectorAntennaCharEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { secAntCharIndex } ::= { sectorAntennaCharTable 1 } SectorAntennaCharEntry ::= SEQUENCE { secAntCharIndex INTEGER, secAntCharGain FloatAsString, secAntCharHorizontalBw FloatAsString, secAntCharVertcalBw FloatAsString, secAntCharRadOnCenter INTEGER, secAntCharAzimuth INTEGER, secAntCharMechanicalTilt INTEGER, secAntCharElectricalTilt INTEGER } secAntCharIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Sector index." ::= { sectorAntennaCharEntry 1 } secAntCharGain OBJECT-TYPE SYNTAX FloatAsString MAX-ACCESS read-write STATUS current DESCRIPTION "The antenna gain in dBd (a measure of how well the antenna will send or pick up a radio signal compared to a dipole antenna). Valid values are 0 to 100." ::= { sectorAntennaCharEntry 2 } secAntCharHorizontalBw OBJECT-TYPE SYNTAX FloatAsString MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the horizontal plane. This value is used along with sectorAntennaVerticalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 360." ::= { sectorAntennaCharEntry 3 } secAntCharVertcalBw OBJECT-TYPE SYNTAX FloatAsString MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the vertical plane. This value is used along with sectorAntennaHorizontalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 180." ::= { sectorAntennaCharEntry 4 } secAntCharRadOnCenter OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a measurement of the antenna center line mounting height, in feet Above Ground Level (AGL)." ::= { sectorAntennaCharEntry 5 } secAntCharAzimuth OBJECT-TYPE SYNTAX INTEGER (0..359) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a measure of the antenna main-beam orientation with respect to true north in the horizontal plane." ::= { sectorAntennaCharEntry 6 } secAntCharMechanicalTilt OBJECT-TYPE SYNTAX INTEGER (-20..90) MAX-ACCESS read-write STATUS current DESCRIPTION "This is a measure of the physical mounting of the antenna with respect to plumb (vertical). This value indicates values relative to plumb which is assumed to be 0 degrees. Negative values would indicate up-tilt, which is occasionally done to adjust for excessive electrical tilt." ::= { sectorAntennaCharEntry 7 } secAntCharElectricalTilt OBJECT-TYPE SYNTAX INTEGER (-20..90) MAX-ACCESS read-write STATUS current DESCRIPTION "A measure of the down-tilt designed into the antenna pattern. This is typically measured relative to a point at 90 degrees to a plumb back plane in the main beam of the antenna. These values may be fixed of variable for a given antenna model." ::= { sectorAntennaCharEntry 8 } -- -- Sector LNA Information -- sectorLnaTable OBJECT-TYPE SYNTAX SEQUENCE OF SectorLnaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" ::= { usrSectorInfo 3 } sectorLnaEntry OBJECT-TYPE SYNTAX SectorLnaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "" INDEX { secLnaIndex } ::= { sectorLnaTable 1 } SectorLnaEntry ::= SEQUENCE { secLnaIndex INTEGER, secLnaFilterType DisplayString, secLnaTowerTop TruthValue } secLnaIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Sector index." ::= { sectorLnaEntry 1 } secLnaFilterType OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter indicated the type of filter used in the LNA/Duplexer unit. It can be simplex (receive only, or duplex for transmit and receive)." ::= { sectorLnaEntry 2 } secLnaTowerTop OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if the LNA is a tower-top mounted type." ::= { sectorLnaEntry 3 } END