EXTREME-SERVICES-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB extremeAgent FROM EXTREME-BASE-MIB TEXTUAL-CONVENTION FROM SNMPv2-TC TruthValue, RowStatus FROM SNMPv2-TC; extremeServices MODULE-IDENTITY LAST-UPDATED "0502230000Z" ORGANIZATION "Extreme Networks, Inc." CONTACT-INFO "www.extremenetworks.com" DESCRIPTION "Extreme Upper layer services objects" ::= { extremeAgent 26 } extremeSyslog OBJECT IDENTIFIER ::= {extremeServices 1} extremeDNS OBJECT IDENTIFIER ::= {extremeServices 3} extremeAuthServer OBJECT IDENTIFIER ::= {extremeServices 4} AuthServerType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The type of authentication/accounting server." SYNTAX INTEGER { radius(1), radius-acct(2), tacacs(3), tacacs-acct(4) } AuthServerAccessType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies whether the server is for authenticating mangement or netlogin accesses" SYNTAX INTEGER { mgmt-access(1), netlogin(2) } extremeRemoteSyslogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeRemoteSyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure remote syslog servers and contains information on the same." ::= { extremeSyslog 1 } extremeRemoteSyslogServerEntry OBJECT-TYPE SYNTAX ExtremeRemoteSyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the extremeRemoteSyslogServerTable." INDEX { extremeRemoteSyslogServerAddressType, extremeRemoteSyslogServerAddress, extremeRemoteSyslogServerPort, extremeRemoteSyslogServerFacility } ::= { extremeRemoteSyslogServerTable 1 } ExtremeRemoteSyslogServerEntry ::= SEQUENCE { extremeRemoteSyslogServerAddressType InetAddressType, extremeRemoteSyslogServerAddress InetAddress, extremeRemoteSyslogServerPort INTEGER, extremeRemoteSyslogServerFacility INTEGER, extremeRemoteSyslogServerSeverity BITS, extremeRemoteSyslogServerStatus RowStatus } extremeRemoteSyslogServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address specified in the object 'extremeRemoteSyslogServerAddress'. Currently, only 'ipv4' and 'dns' are supported." DEFVAL { ipv4 } ::= { extremeRemoteSyslogServerEntry 1 } extremeRemoteSyslogServerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the remote syslog server. This can be a DNS name or an IPv4 address." ::= { extremeRemoteSyslogServerEntry 2 } extremeRemoteSyslogServerPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP port number of the remote syslog server to which syslog messages will be sent." ::= { extremeRemoteSyslogServerEntry 3 } extremeRemoteSyslogServerFacility OBJECT-TYPE SYNTAX INTEGER { local0(1), local1(2), local2(3), local3(4), local4(5), local5(6), local6(7), local7(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The facility which will be sent in all syslog messages to this remote syslog server." ::= { extremeRemoteSyslogServerEntry 4 } extremeRemoteSyslogServerSeverity OBJECT-TYPE SYNTAX BITS { critical(0), error(1), warning(2), notice(3), info(4), debugSummary(5), debugVerbose(6), debugData(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The syslog message severity. All syslog messages of the specified severity for which the Bits are set, will be sent to this syslog server. When setting this object in a 'createAndGo' request, all lower bits upto and including the desired bit position must be set. For example, if bit info(4) needs to be set then bits critical(0), error(1), warning(2), notice(3) and info(4) must also be set in the request. Consequently, all syslog messages of a given severity and higher will be sent to the syslog server. It is not possible to send messages that match only a few selected non-contiguous severities." DEFVAL { {critical, error, warning, notice, info, debugSummary, debugVerbose, debugData} } ::= { extremeRemoteSyslogServerEntry 5 } extremeRemoteSyslogServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the values of the objects of a row once it has been created, except by 'destroy'ing and re-creating the row." ::= { extremeRemoteSyslogServerEntry 6 } extremeEnableRemoteSyslog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The enable/disable status of remote syslog messages." ::= { extremeSyslog 2 } extremeDNSServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeDNSServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure DNS servers. There can be at most two rows in this table." ::= { extremeDNS 1 } extremeDNSServerEntry OBJECT-TYPE SYNTAX ExtremeDNSServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the extremeDNSServerTable." INDEX { extremeDNSServerAddressIndex } ::= { extremeDNSServerTable 1 } ExtremeDNSServerEntry ::= SEQUENCE { extremeDNSServerAddressIndex INTEGER, extremeDNSServerAddressType InetAddressType, extremeDNSServerAddress InetAddress } extremeDNSServerAddressIndex OBJECT-TYPE SYNTAX INTEGER(1..2) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is an integer index. Only 1 and 2 are supported for this" ::= { extremeDNSServerEntry 1 } extremeDNSServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of the DNS server. This can be a DNS name or an IPv4 address." ::= { extremeDNSServerEntry 2 } extremeDNSServerAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (1..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The address of the DNS server. This can be a DNS name or an IPv4 address." ::= { extremeDNSServerEntry 3 } extremeAuthServerEnableTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeAuthServerEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to enable/disable Auth servers" ::= { extremeAuthServer 1 } extremeAuthServerEnableEntry OBJECT-TYPE SYNTAX ExtremeAuthServerEnableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the extremeAuthServerEnableTable." INDEX { extremeAuthServerEnableServerType, extremeAuthServerEnableAccessType } ::= { extremeAuthServerEnableTable 1 } ExtremeAuthServerEnableEntry ::= SEQUENCE { extremeAuthServerEnableServerType AuthServerType, extremeAuthServerEnableAccessType AuthServerAccessType, extremeAuthServerEnable TruthValue } extremeAuthServerEnableServerType OBJECT-TYPE SYNTAX AuthServerType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server" ::= { extremeAuthServerEnableEntry 1 } extremeAuthServerEnableAccessType OBJECT-TYPE SYNTAX AuthServerAccessType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies whether this server is for management access or netlogin access." ::= { extremeAuthServerEnableEntry 2 } extremeAuthServerEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable/Disable the Radius/tacas Server" DEFVAL { false } ::= { extremeAuthServerEnableEntry 3 } extremeAuthServerTable OBJECT-TYPE SYNTAX SEQUENCE OF ExtremeAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to configure radius/tacacs servers." ::= { extremeAuthServer 2 } extremeAuthServerEntry OBJECT-TYPE SYNTAX ExtremeAuthServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the extremeAuthServerTable." INDEX { extremeAuthServerIndex } ::= { extremeAuthServerTable 1 } ExtremeAuthServerEntry ::= SEQUENCE { extremeAuthServerIndex INTEGER, extremeAuthServerAddressType InetAddressType, extremeAuthServerAddress InetAddress, extremeAuthServerClientAddressType InetAddressType, extremeAuthServerClientAddress InetAddress, extremeAuthServerPort INTEGER, extremeAuthServerSecret OCTET STRING, extremeAuthServerReTransmit INTEGER, extremeAuthServerType AuthServerType, extremeAuthServerIsPrimary TruthValue, extremeAuthServerAccessType AuthServerAccessType, extremeAuthServerStatus RowStatus} extremeAuthServerIndex OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Integer index of the server." ::= { extremeAuthServerEntry 1 } extremeAuthServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Type IP address of the radius/tacas server. " ::= { extremeAuthServerEntry 2 } extremeAuthServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address of the radius/tacas server." ::= { extremeAuthServerEntry 3 } extremeAuthServerClientAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "Type of IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its clients. The switch should have a VLAN with this IP address." ::= { extremeAuthServerEntry 4 } extremeAuthServerClientAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "IP address to use as the SRC address when contacting the the radius/tacas server. The radius/tacas server should be configured with this address as one of its clients. The switch should have a VLAN with this IP address." ::= { extremeAuthServerEntry 5 } extremeAuthServerPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Port number of the radius/tacas server." ::= { extremeAuthServerEntry 6 } extremeAuthServerSecret OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-write STATUS current DESCRIPTION "This is the shared secret between the Authenticator and radius/tacas server. This is logically write-only." ::= { extremeAuthServerEntry 7 } extremeAuthServerReTransmit OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This is the timeout in seconds after which the Authenticator will re transmit requests to the radius/tacas server." ::= { extremeAuthServerEntry 8 } extremeAuthServerType OBJECT-TYPE SYNTAX AuthServerType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this is a radius/radius-acct/tacacs/tacacs-acct server" ::= { extremeAuthServerEntry 9 } extremeAuthServerIsPrimary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this is the primary or the secondary server. Is TRUE if the server is primary." ::= { extremeAuthServerEntry 10 } extremeAuthServerAccessType OBJECT-TYPE SYNTAX AuthServerAccessType MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether this server is for management access or netlogin access" ::= { extremeAuthServerEntry 11 } extremeAuthServerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of the Row as per standard row status conventions. Only 'createAndGo', 'active' and 'destroy' will be supported. It is not possible to change the values of the objects of a row once it has been created, except by 'destroy'ing and re-creating the row." ::= { extremeAuthServerEntry 12 } END -- ################################################################################