ENVIRONMENT-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE,MODULE-IDENTITY,Integer32, Gauge32,NOTIFICATION-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION,TruthValue FROM SNMPv2-TC NOTIFICATION-GROUP FROM SNMPv2-CONF ntEnterpriseDataTasmanMgmt FROM NT-ENTERPRISE-DATA-MIB; nnenvironmentMib MODULE-IDENTITY LAST-UPDATED "0008180000Z" ORGANIZATION "Nortel Networks" CONTACT-INFO " Nortel Networks 8200 Dixie Road Brampton, Ontario L6T 5P6 Canada 1-800-4Nortel www.nortelnetworks.com " DESCRIPTION "" REVISION "0008180000Z" DESCRIPTION "Initial version of Environment MIB." ::= { ntEnterpriseDataTasmanMgmt 3 } EnvState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the state of a device being monitored." SYNTAX INTEGER { normal(1), warning(2), critical(3), fail(4), turned-off(5) } EnvInstalled ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Installed flag for power supply." SYNTAX INTEGER { not-installed(1), installed(2) } EnvStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Installed flag for power supply." SYNTAX INTEGER { absent(1), failed(2), normal(3) } EnvType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Installed flag for power supply." SYNTAX INTEGER { supply-AC-ONLY(1), supply-AC-PoE(2), supply-DC(3), unknown(4) -- unknown(1), -- minus48VDC(2), -- supplyAC(3), -- dualDC(4), -- supplyAC-DC(5) } nnenvObjects OBJECT IDENTIFIER ::= { nnenvironmentMib 1 } nnenvNotificationEnables OBJECT IDENTIFIER ::= { nnenvironmentMib 2 } nnenvNotifications OBJECT IDENTIFIER ::= { nnenvironmentMib 3 } nnenvTraps OBJECT IDENTIFIER ::= {nnenvNotifications 0} nnenvTempSensorGroup OBJECT IDENTIFIER ::= { nnenvObjects 1 } -- -- envObjects group contains the management objects that -- decribe the current environmental state of the system, -- such as voltage, temperature, fan, power supply, etc. -- nnenvTempSensorValue OBJECT-TYPE SYNTAX Gauge32 -- UNITS "degrees Celsius" MAX-ACCESS read-only STATUS current DESCRIPTION " The Average value of the temperature sensors. " ::= { nnenvTempSensorGroup 1 } nnenvTempSensorState OBJECT-TYPE SYNTAX EnvState MAX-ACCESS read-only STATUS current DESCRIPTION " The Average status of the temperature sensors. " ::= { nnenvTempSensorGroup 2 } nnenvFanTable OBJECT-TYPE SYNTAX SEQUENCE OF NnEnvFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of fan unit entries." ::= { nnenvObjects 2 } nnenvFanEntry OBJECT-TYPE SYNTAX NnEnvFanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about a fan within the chassis." INDEX { nnenvFanUnitIndex } ::= { nnenvFanTable 1 } NnEnvFanEntry ::= SEQUENCE { nnenvFanUnitIndex INTEGER, nnenvFanState EnvState } nnenvFanUnitIndex OBJECT-TYPE SYNTAX INTEGER(0 ..1) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The index to access an entry in the table. " ::= { nnenvFanEntry 1 } nnenvFanState OBJECT-TYPE SYNTAX EnvState MAX-ACCESS read-only STATUS current DESCRIPTION " The current state of fan 0, normal/fail. " ::= { nnenvFanEntry 2 } nnenvPwrsupPowerFailCount OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of failures of either power supply since boot-up." ::= { nnenvObjects 3 } nnenvPwrsupTable OBJECT-TYPE SYNTAX SEQUENCE OF NnEnvPwrsupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of power supply status information." ::= { nnenvObjects 4 } nnenvPwrsupEntry OBJECT-TYPE SYNTAX NnEnvPwrsupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing power supply information." INDEX { nnenvPwrsupIndex } ::= { nnenvPwrsupTable 1 } NnEnvPwrsupEntry ::= SEQUENCE { nnenvPwrsupIndex INTEGER, nnenvPwrsupInstalled EnvInstalled, nnenvPwrsupStatus EnvStatus, nnenvPwrsupType EnvType, nnenvPwrsupUptime Integer32, nnenvPwrsupDowntime Integer32 } nnenvPwrsupIndex OBJECT-TYPE SYNTAX INTEGER (1..2) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index to access entry." ::= { nnenvPwrsupEntry 1 } nnenvPwrsupInstalled OBJECT-TYPE SYNTAX EnvInstalled MAX-ACCESS read-only STATUS current DESCRIPTION "Power supply installed flag." ::= { nnenvPwrsupEntry 2 } nnenvPwrsupStatus OBJECT-TYPE SYNTAX EnvStatus MAX-ACCESS read-only STATUS current DESCRIPTION "Power supply up/down status." ::= { nnenvPwrsupEntry 3 } nnenvPwrsupType OBJECT-TYPE SYNTAX EnvType MAX-ACCESS read-only STATUS current DESCRIPTION "Power supply type." ::= { nnenvPwrsupEntry 4 } nnenvPwrsupUptime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds since power supply came up." ::= { nnenvPwrsupEntry 5 } nnenvPwrsupDowntime OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Seconds since power supply went down." ::= { nnenvPwrsupEntry 6 } -- -- envNotificationEnables contains the managed objects to -- enable notifications when the system is shut down due -- to one of the environmental causes. -- nnenvEnableTemperatureNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system produces the envTemperatureNotification. The default is yes. Note: implementation is TBD. " DEFVAL { true } ::= { nnenvNotificationEnables 1 } nnenvEnableFanNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system produces the envFanNotification. The default is yes. " DEFVAL { true } ::= { nnenvNotificationEnables 2 } nnenvEnablePowerNotification OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the system produces the envPowerNotification. The default is yes. " DEFVAL { true } ::= { nnenvNotificationEnables 3 } -- -- envNotifications group is used to define shut down notifications. -- nnenvTemperatureNotification NOTIFICATION-TYPE OBJECTS { nnenvTempSensorValue, nnenvTempSensorState } STATUS current DESCRIPTION " An envTemeratureNotification is sent if the environmental monitoring detects that the temperature is at a critical state. This may cause the system to shut down. This notification is sent only if envEnableTemperatureNotification is set to true. " --#TYPE "Temperature status" --#SUMMARY "Temperature notification for sensor Index: %s with Value: %s and State: %s" --#ARGUMENTS {0,1,2} --#SEVERITY CRITICAL ::= {nnenvTraps 1} nnenvFanNotification NOTIFICATION-TYPE OBJECTS{ nnenvFanUnitIndex, nnenvFanState } STATUS current DESCRIPTION " An envFanNotification is sent if the environmental monitoring detects that a fan is in a critical state. This may cause the system to shut down. This notification is sent only if envEnableFanNotification is set to true. " --#TYPE "Fan state change" --#SUMMARY "Fan unit index: %s State changed to: %s" --#ARGUMENTS {0,1} --#SEVERITY CRITICAL ::= {nnenvTraps 2} nnenvPowerSupply1DownNotification NOTIFICATION-TYPE OBJECTS{ nnenvPwrsupPowerFailCount, nnenvPwrsupIndex, nnenvPwrsupInstalled, nnenvPwrsupStatus, nnenvPwrsupType, nnenvPwrsupUptime, nnenvPwrsupDowntime } STATUS current DESCRIPTION " An envPowerNotification is sent if the environmental monitoring detects that a power supply has changed status. This notification is sent only if envEnablePowerNotification is set to true. " --#TYPE "Power supply 1 down" --#SUMMARY "Power supply 1 down. Fail count: %s Index: %s Installed: %s Status: %s Type: %s Uptime: %s Downtime: %s" --#ARGUMENTS {0,1,2,3,4,5,6} --#SEVERITY MAJOR ::= {nnenvTraps 3} nnenvPowerSupply1UpNotification NOTIFICATION-TYPE OBJECTS{ nnenvPwrsupPowerFailCount, nnenvPwrsupIndex, nnenvPwrsupInstalled, nnenvPwrsupStatus, nnenvPwrsupType, nnenvPwrsupUptime, nnenvPwrsupDowntime } STATUS current DESCRIPTION " An envPowerNotification is sent if the environmental monitoring detects that a power supply has changed status. This notification is sent only if envEnablePowerNotification is set to true. " --#TYPE "Power supply 1 Up" --#SUMMARY "Power supply 1 up. Fail count: %s Index: %s Installed: %s Status: %s Type: %s Uptime: %s Downtime: %s" --#ARGUMENTS {0,1,2,3,4,5,6} --#SEVERITY NORMAL ::= {nnenvTraps 4} nnenvPowerSupply2DownNotification NOTIFICATION-TYPE OBJECTS{ nnenvPwrsupPowerFailCount, nnenvPwrsupIndex, nnenvPwrsupInstalled, nnenvPwrsupStatus, nnenvPwrsupType, nnenvPwrsupUptime, nnenvPwrsupDowntime } STATUS current DESCRIPTION " An envPowerNotification is sent if the environmental monitoring detects that a power supply has changed status. This notification is sent only if envEnablePowerNotification is set to true. " --#TYPE "Power supply 2 down" --#SUMMARY "Power supply 2 down. Fail count: %s Index: %s Installed: %s Status: %s Type: %s Uptime: %s Downtime: %s" --#ARGUMENTS {0,1,2,3,4,5,6} --#SEVERITY MAJOR ::= {nnenvTraps 5} nnenvPowerSupply2UpNotification NOTIFICATION-TYPE OBJECTS{ nnenvPwrsupPowerFailCount, nnenvPwrsupIndex, nnenvPwrsupInstalled, nnenvPwrsupStatus, nnenvPwrsupType, nnenvPwrsupUptime, nnenvPwrsupDowntime } STATUS current DESCRIPTION " An envPowerNotification is sent if the environmental monitoring detects that a power supply has changed status. This notification is sent only if envEnablePowerNotification is set to true. " --#TYPE "Power supply 2 Up" --#SUMMARY "Power supply 2 up. Fail count: %s Index: %s Installed: %s Status: %s Type: %s Uptime: %s Downtime: %s" --#ARGUMENTS {0,1,2,3,4,5,6} --#SEVERITY NORMAL ::= {nnenvTraps 6} nnenvironementNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { nnenvTemperatureNotification, nnenvFanNotification, nnenvPowerSupply1DownNotification, nnenvPowerSupply1UpNotification, nnenvPowerSupply2DownNotification, nnenvPowerSupply2UpNotification } STATUS current DESCRIPTION "THE Envrionment MIB Notification Group" ::={nnenvironmentMib 4} END