ENTERASYS-SNMP-PERSISTENCE-MIB DEFINITIONS ::= BEGIN -- enterasys-snmp-persistence-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' SNMP persistence MIB. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- This MIB is based upon the Storage Type MIB, an IETF Internet -- Draft, dated June 21, 2001 with Juergen Schoenwaelder listed as -- the author. -- Copyright (C) The Internet Society (2001). All Rights Reserved. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, TimeTicks FROM SNMPv2-SMI DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysSnmpPersistenceMIB MODULE-IDENTITY LAST-UPDATED "200209092022Z" -- Mon Sep 9 20:22 GMT 2002 ORGANIZATION "Enterasys Networks Inc" CONTACT-INFO "Postal: Enterasys Networks 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 Phone: +1 603 332 9400 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB modules provides objects that allow management applications to commit persistent SNMP configuration information to persistent storage." REVISION "200209092022Z" -- Mon Sep 9 20:22 GMT 2002 DESCRIPTION "The initial version of this MIB module." ::= { etsysModules 24 } etsysSnmpPersistenceObjects OBJECT IDENTIFIER ::= { etsysSnmpPersistenceMIB 1 } etsysSnmpPersistenceMode OBJECT-TYPE SYNTAX INTEGER { snmpNormalSave(1), pushButtonSave(2), timeDelayedSave(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to snmpNormalSave(1) will cause this device to exhibit what could be considered normal SNMP behavior, that is each SNMP set of a persistent object will be saved to persistent storage as part of the set operation. Setting this object to pushButtonSave(2) will cause SNMP sets of persistent objects to be buffered in volatile memory until the configuration is explicitly saved to persistent memory, either through the CLI or by setting the etsysSnmpPersistenceWrite object to save(2). Setting this object to timeDelayedSave(3) will cause SNMP sets of persistent objects to be buffered in volatile memory until certain implementation dependent time conditions are met. Once these conditions are met the configuration is saved to persistent memory. Setting this object to a mode that is not supported on that particular implementation leads to an inconsistent value error. On an SNMP get operation this object will return the current persistent storage mode of operation." ::= { etsysSnmpPersistenceObjects 1 } etsysSnmpPersistenceSave OBJECT-TYPE SYNTAX INTEGER { nop(1), save(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to save(2) will cause the current configuration that is stored in volatile memory to be written to persistent memory and become the start-up configuration. This will also cause any configuration information that is part of another management interface's active configuration to become part of the start-up configuration. Any configuration changes made through SNMP will become part of the start-up configuration if and when another management interface saves the current configuration to persistent storage. Setting this object to save(2) while the value of the etsysSnmpPersistenceMode object is NOT pushButtonSave(2) MAY lead to an inconsistent value error. Setting this object to save(2) while the value of the etsysSnmpPersistenceStatus object is savingChanges(3) leads to an inconsistent value error. Setting this object to nop(1) always succeeds and has no effect. On an SNMP get operation this object will return nop(1). Management applications are advised to make use of the snmpSetSerialNo object defined in the SNMPv2-MIB to coordinate their use of this object." ::= { etsysSnmpPersistenceObjects 2 } etsysSnmpPersistenceStatus OBJECT-TYPE SYNTAX INTEGER { other(1), unsavedChanges(2), savingChanges(3), saveSucceeded(4), saveFailed(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reports the current status of the persistent storage system when the etsysSnmpPersistenceMode object is NOT set to snmpNormalSave(1). other - The value returned after initialization and before any configuration changes are made when the etsysSnmpPersistenceMode object is NOT set to snmpNormalSave(1). The value returned in all cases when the etsysSnmpPersistenceMode object is set to snmpNormalSave(1). unsavedChanges - The value returned when there are existing configuration changes that have not been saved to persistent storage. savingChanges - The value returned during the process of writing the current configuration to persistent storage. saveSucceeded - The value returned after the process of writing the current configuration to persistent storage has succeeded. saveFailed - The value returned after the process of writing the current configuration to persistent storage has failed. This status will reflect operations initiated through SNMP as well as all other supported management interfaces." ::= { etsysSnmpPersistenceObjects 3 } etsysSnmpPersistenceStatusTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when etsysSnmpPersistenceStatus was last updated. If etsysSnmpPersistenceStatus has not been updated since initialization the value zero is returned." ::= { etsysSnmpPersistenceObjects 4 } etsysSnmpPersistenceError OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains a descriptive error message if the last attempt to write to persistent storage has failed." ::= { etsysSnmpPersistenceObjects 5 } etsysSnmpPersistenceErrorTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The data and time when the etsysSnmpPersistenceError was last updated. If etsysSnmpPersistenceError has not been updated since initialization the value '0000000000000000'H is returned." ::= { etsysSnmpPersistenceObjects 6 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysSnmpPersistenceConformance OBJECT IDENTIFIER ::= { etsysSnmpPersistenceMIB 2 } etsysSnmpPersistenceGroups OBJECT IDENTIFIER ::= { etsysSnmpPersistenceConformance 1 } etsysSnmpPersistenceCompliances OBJECT IDENTIFIER ::= { etsysSnmpPersistenceConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- etsysSnmpPersistenceGroup OBJECT-GROUP OBJECTS { etsysSnmpPersistenceMode, etsysSnmpPersistenceSave, etsysSnmpPersistenceStatus, etsysSnmpPersistenceStatusTime, etsysSnmpPersistenceError, etsysSnmpPersistenceErrorTime } STATUS current DESCRIPTION "A collection of objects providing support for delayed persistence of otherwise persistent SNMP objects." ::= { etsysSnmpPersistenceGroups 1 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- etsysSnmpPersistenceCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support delayed persistence of otherwise persistent SNMP objects." MODULE MANDATORY-GROUPS { etsysSnmpPersistenceGroup } ::= { etsysSnmpPersistenceCompliances 1 } END