-- $Header: K:/WanSuite/archives/include/pvcs/ds8200v2.mib,v 1.40 Mar 19 2004 08:53:38 mikeh $ DS8200v2-MIB DEFINITIONS ::= BEGIN IMPORTS enterprises, TimeTicks, OBJECT-TYPE, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC verilink,hbu FROM DS8200v2-TC-MIB; tinterfaces MODULE-IDENTITY LAST-UPDATED "0008180000Z" ORGANIZATION "Verilink Corporation" CONTACT-INFO "support@verilink.com + 1 800 285 2755" DESCRIPTION "DS8200v2 MIB." ::= { hbu 2 } -- { enterprises verilink hbu branch#2 (ipad is branch#1) mgmtPorts OBJECT IDENTIFIER ::= { tinterfaces 1 } dbu OBJECT IDENTIFIER ::= { tinterfaces 2 } t1e1 OBJECT IDENTIFIER ::= { tinterfaces 3 } ddsNet OBJECT IDENTIFIER ::= { tinterfaces 4 } serialDte OBJECT IDENTIFIER ::= { tinterfaces 5 } analogDte OBJECT IDENTIFIER ::= { tinterfaces 6 } connection OBJECT IDENTIFIER ::= { tinterfaces 7 } maintenance OBJECT IDENTIFIER ::= { tinterfaces 8 } performance OBJECT IDENTIFIER ::= { tinterfaces 9 } itable OBJECT IDENTIFIER ::= { tinterfaces 10 } traplog OBJECT IDENTIFIER ::= { tinterfaces 11 } unitUtilities OBJECT IDENTIFIER ::= { tinterfaces 12 } productInfo OBJECT IDENTIFIER ::= { tinterfaces 13 } netAPS OBJECT IDENTIFIER ::= { tinterfaces 14 } -- productInfo section -- brought in from old TxPort.MIB productModelNumber OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string displays the units model number" ::= { productInfo 1 } productModelDescr OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string displays a brief description of the unit" ::= { productInfo 2 } productElementId OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the same information that is in the element id field located in the utilities Screen of the unit's user interface. This field can be set from either location." ::= { productInfo 3 } productSoftwareRev OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string reports the units current software revision" ::= { productInfo 4 } productHardwareRev OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string reports the units hardware revision" ::= { productInfo 5 } productSerialNum OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string displays the unit's serial number" ::= { productInfo 6 } productPhysicalAddress OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string displays the unit's physical ethernet address" ::= { productInfo 7 } productNmsAddress OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-only STATUS current DESCRIPTION "This string displays the unit's NMS address which is used to identify it to the TxPORT management products" ::= { productInfo 8 } productLabelTable OBJECT-TYPE SYNTAX SEQUENCE OF ProductLabelTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Product Label Table." ::= { productInfo 9 } productLabelTableEntry OBJECT-TYPE SYNTAX ProductLabelTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the product label table." INDEX { labelTableIndex } ::= { productLabelTable 1 } ProductLabelTableEntry ::= SEQUENCE { labelTableIndex INTEGER, labelTableLabel DisplayString, labelTableValue DisplayString } labelTableIndex OBJECT-TYPE SYNTAX INTEGER(1..3) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index into the ProductLabelTable." ::= { productLabelTableEntry 1 } labelTableLabel OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A product label." ::= { productLabelTableEntry 2 } labelTableValue OBJECT-TYPE SYNTAX DisplayString(SIZE(0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "The data associated with the label." ::= { productLabelTableEntry 3 } -- mgmtPorts section -- this section contains the configuration settings for the management ports mgmtPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF MgmtPortsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Management Ports table." ::= { mgmtPorts 1 } mgmtPortsTableEntry OBJECT-TYPE SYNTAX MgmtPortsTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Management Ports table." INDEX { mgmtPortsTableIndex } ::= { mgmtPortsTable 1 } MgmtPortsTableEntry ::= SEQUENCE { mgmtPortsTableIndex INTEGER, mgmtPortsDescription DisplayString, mgmtPortsElementID DisplayString, mgmtPortsMode INTEGER, mgmtPortsDialPrefix DisplayString, mgmtPortsPrimaryDialString DisplayString, mgmtPortsSecondaryDialString DisplayString, mgmtPortsExtInitString DisplayString, mgmtPortsCompressedSlip INTEGER, mgmtPortsInternalModem INTEGER } mgmtPortsTableIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the Management Ports table." ::= { mgmtPortsTableEntry 1 } mgmtPortsDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..40) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a textual description of the port." ::= { mgmtPortsTableEntry 2 } mgmtPortsElementID OBJECT-TYPE SYNTAX DisplayString( SIZE(0..27) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object signifies the name of the device." ::= { mgmtPortsTableEntry 3 } mgmtPortsMode OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), coadial(3), coadirect(4), extAlarmOnOpen(5), extAlarmOnClosed(6), slipdial(7), slipdirect(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object signifies the method used by the port to report alarms." ::= { mgmtPortsTableEntry 4 } mgmtPortsDialPrefix OBJECT-TYPE SYNTAX DisplayString( SIZE(0..38) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the dial string prefix for a modem connected to the port." ::= { mgmtPortsTableEntry 5 } mgmtPortsPrimaryDialString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..30) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the primary dial string for a modem connected to the port." ::= { mgmtPortsTableEntry 6 } mgmtPortsSecondaryDialString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..30) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the secondary dial string for a modem connected to the port." ::= { mgmtPortsTableEntry 7 } mgmtPortsExtInitString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..38) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains the init string for a modem connected to the port." ::= { mgmtPortsTableEntry 8 } mgmtPortsCompressedSlip OBJECT-TYPE SYNTAX INTEGER { other(1), enabled(2), disabled(3), auto(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies if SLIP compression is to be used." ::= { mgmtPortsTableEntry 9 } mgmtPortsInternalModem OBJECT-TYPE SYNTAX INTEGER { other(1), notPresent(2), enabled(3), disabled(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object signifies if the internal modem (when present) is enabled." ::= { mgmtPortsTableEntry 10 } -- dbu section -- dial backup options for devices which have integrated or -- optional dial backup units dbuConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DbuConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Dial Backup Configuration Table." ::= { dbu 1 } dbuConfigTableEntry OBJECT-TYPE SYNTAX DbuConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Dial Backup Configuration table." INDEX { dbuNearIndex, dbuFarIndex, dbuConfigTableIndex } ::= { dbuConfigTable 1 } DbuConfigTableEntry ::= SEQUENCE { dbuNearIndex INTEGER, dbuFarIndex INTEGER, dbuConfigTableIndex INTEGER, dbuDescription DisplayString, dbuRate INTEGER, dbuMode INTEGER, dbuFormat INTEGER, dbuNumber DisplayString, dbuStatus INTEGER, dbuCommand INTEGER, dbuActivator1 INTEGER, dbuActivator2 INTEGER, dbuDialStr DisplayString, dbuInitStr DisplayString, dbuHangupStr DisplayString, dbuPasswordStr DisplayString, dbuSecurity INTEGER, dbuDtrDial INTEGER, dbuISDNSwitchType INTEGER, dbuISDNSwitchVersion INTEGER, dbuISDNTEI INTEGER, dbuISDNSPID DisplayString, dbuISDNDDNUM DisplayString } dbuNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { dbuConfigTableEntry 1 } dbuFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { dbuConfigTableEntry 2 } dbuConfigTableIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the Dial Backup table." ::= { dbuConfigTableEntry 3 } dbuDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..40) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a textual description of the dbu." ::= { dbuConfigTableEntry 4 } dbuRate OBJECT-TYPE SYNTAX INTEGER { dbuRateOther(1), dbuRate2400(2), dbuRate4800(3), dbuRate9600(4), dbuRate19200(5), dbuRate38400(6), dbuRate56000(7), dbuRate57600(8), dbuRate64000(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current DDS DBU rate. The values mean: dbuRate2400 the DBU interface is operating at 2400bps dbuRate4800 the DBU interface is operating at 4800bps dbuRate9600 the DBU interface is operating at 9600bps dbuRate19200 the DBU interface is operating at 19200bps dbuRate38400 the DBU interface is operating at 38400bps dbuRate56000 the DBU interface is operating at 56000bps dbuRate57600 the DBU interface is operating at 57600bps dbuRate64000 the DBU interface is operating at 64000bps" ::= { dbuConfigTableEntry 5 } dbuMode OBJECT-TYPE SYNTAX INTEGER { dbuModeOther(1), dbuModeOrig(2), dbuModeAnsw(3), dbuModeNotAvail(4), dbuModeCallbackOrig(5), dbuModeCallbackAnsw(6), dbuModeMaster(7), dbuModeSlave(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current mode that the Dial Backup Unit is operating in. The values mean: dbuModeOrig The dial backup unit is operating in the originate mode dbuModeAnsw The dial backup unit is operating in the answer mode dbuModeNotAvail The dial backup unit's mode is not available dbuModeCallbackOrig The dial backup unit is operating in the callback originate mode dbuModeCallbackAnsw The dial backup unit is operating in the callback mode dbuModeMaster The dial backup unit is configured as a master unit dbuModeSlave The dial backup unit is configured as a slave unit" ::= { dbuConfigTableEntry 6 } dbuFormat OBJECT-TYPE SYNTAX INTEGER { dbuFormatOther(1), dbuFormatSync(2), dbuFormatAsync(3), dbuFormatNotAvail(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current format that the Dial Backup Unit is operating in. The values mean: dbuFormatSync The dial backup unit is operating in the synchronous format dbuFormatAsync The dial backup unit is operating in the asynchronous format dbuFormatNotAvail The dial backup unit's format is not available" ::= { dbuConfigTableEntry 7 } dbuNumber OBJECT-TYPE SYNTAX DisplayString( SIZE(0..100) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the currently programmed number for the dial backup unit to call" ::= { dbuConfigTableEntry 8 } dbuStatus OBJECT-TYPE SYNTAX INTEGER { dbuStatusOther(1), dbuStatusDisabled(2), dbuStatusEnabled(3), dbuStatusActive(4), dbuStatusLocked(5), dbuStatusConnecting(6), dbuStatusDisallowed(7), dbuStatusAwaitingCall(8), dbuStatusDialing(9), dbuStatusDisconnecting(10), dbuStatusTesting(11), dbuStatusTestPassed(12), dbuStatusTestFailed(13) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the identifier of the current Dial Backup Unit operating status. The values mean: dbuStatusDisabled The dial backup unit is either not installed or disabled dbuStatusEnabled The dial backup unit is installed and enabled dbuStatusActive The dial backup unit is currently active dbuStatusLocked The dial backup unit is in a locked state dbuStatusConnecting The dial backup unit is in the process of connecting dbuStatusDisallowed The dial backup unit is currently not allowed to activate due to the Time Of Day Enable settings dbuStatusAwaitingCall The dial backup unit is in the process of waiting for an incoming call dbuStatusDialing The dial backup unit is in the process of placing a call dbuStatusDisconnecting The dial backup unit is in the process of disconnecting dbuStatusTesting The dial backup unit is in the process of testing dbuStatusTestPassed The dial backup unit has passed a self-test dbuStatusTestFailed The dial backup unit has failed a self-test" ::= { dbuConfigTableEntry 9 } dbuCommand OBJECT-TYPE SYNTAX INTEGER { dbuCommandOther(1), dbuCommandDisable(2), dbuCommandEnable(3), dbuCommandActivate(4), dbuCommandLock(5), dbuCommandEnableDaily(6), dbuCommandTest(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current setting that the Dial Backup Unit is operating in. The values mean: dbuCommandDisable The dial backup unit is not to operate dbuCommandEnable The dial backup unit is to operate, subject to Activator and line conditions only dbuCommandActivate The dial backup unit is to operate, irregardless of line conditions dbuCommandLock The dial backup unit is to continue operating, irregardless of line conditions dbuCommandEnableDaily The dial backup unit is to operate, subject to Activator, line conditions, and the Time Of Day Enable fields dbuCommandTest The dial backup unit is commanded to test the link." ::= { dbuConfigTableEntry 10 } dbuActivator1 OBJECT-TYPE SYNTAX INTEGER { dbuActivatorOther(1), dbuActivatorLOS(2), dbuActivatorOOS(3), dbuActivatorOOF(4), dbuActivatorAny(5), dbuActivatorES(6), dbuActivatorSES(7), dbuActivatorUAS(8), dbuActivatorLOF(9), dbuActivatorRAS(10), dbuActivatorAIS(11), dbuActivatorBPV(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current trigger that will activate the Dial Backup Unit. The values mean: dbuActivatorLOS The dial backup unit is activated by a LOS alarm condition dbuActivatorOOS The dial backup unit is activated by an OOS alarm condition dbuActivatorOOF The dial backup unit is activated by an OOF alarm condition dbuActivatorAny The dial backup unit is activated by a LOS, OOS, or OOF alarm condition dbuActivatorES The dial backup unit is activated by an ES alarm condition dbuActivatorSES The dial backup unit is activated by an SES alarm condition dbuActivatorUAS The dial backup unit is activated by an UAS alarm condition dbuActivatorLOF The dial backup unit is activated by an LOF alarm condition dbuActivatorRAS The dial backup unit is activated by an RAS alarm condition dbuActivatorAIS The dial backup unit is activated by an AIS alarm condition dbuActivatorBPV The dial backup unit is activated by an BPV alarm condition" ::= { dbuConfigTableEntry 11 } dbuActivator2 OBJECT-TYPE SYNTAX INTEGER { dbuActivatorOther(1), dbuActivatorLOS(2), dbuActivatorOOS(3), dbuActivatorOOF(4), dbuActivatorAny(5), dbuActivatorES(6), dbuActivatorSES(7), dbuActivatorUAS(8), dbuActivatorLOF(9), dbuActivatorRAS(10), dbuActivatorAIS(11), dbuActivatorBPV(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current trigger that will activate the Dial Backup Unit. The values mean: dbuActivatorLOS The dial backup unit is activated by a LOS alarm condition dbuActivatorOOS The dial backup unit is activated by a OOS alarm condition dbuActivatorOOF The dial backup unit is activated by a OOF alarm condition dbuActivatorAny The dial backup unit is activated by a LOS, OOS, or OOF alarm condition dbuActivatorES The dial backup unit is activated by an ES alarm condition dbuActivatorSES The dial backup unit is activated by an SES alarm condition dbuActivatorUAS The dial backup unit is activated by an UAS alarm condition dbuActivatorLOF The dial backup unit is activated by an LOF alarm condition dbuActivatorRAS The dial backup unit is activated by an RAS alarm condition dbuActivatorAIS The dial backup unit is activated by an AIS alarm condition dbuActivatorBPV The dial backup unit is activated by an BPV alarm condition" ::= { dbuConfigTableEntry 12 } dbuDialStr OBJECT-TYPE SYNTAX DisplayString( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the dial string sent to the dial backup unit during every connection attempt" ::= { dbuConfigTableEntry 13 } dbuInitStr OBJECT-TYPE SYNTAX DisplayString( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the initialization string sent to the dial backup unit before every connection attempt" ::= { dbuConfigTableEntry 14 } dbuHangupStr OBJECT-TYPE SYNTAX DisplayString( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the hangup command string sent to the dial backup unit after every successful call" ::= { dbuConfigTableEntry 15 } dbuPasswordStr OBJECT-TYPE SYNTAX DisplayString( SIZE(0..8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the prompt character and password string for the dial backup unit in Callback DBU" ::= { dbuConfigTableEntry 16 } dbuSecurity OBJECT-TYPE SYNTAX INTEGER { dbuSecurityOther(1), dbuSecurityDisable(2), dbuSecurityEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables security on dial backup unit." ::= { dbuConfigTableEntry 17 } dbuDtrDial OBJECT-TYPE SYNTAX INTEGER { dbuDtrDialOther(1), dbuDtrDialDisable(2), dbuDtrDialEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables DTR dial feature on dial backup unit." ::= { dbuConfigTableEntry 18 } dbuISDNSwitchType OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the switch type for the ISDN DBU." ::= { dbuConfigTableEntry 19 } dbuISDNSwitchVersion OBJECT-TYPE SYNTAX INTEGER { dbuISDNSwitchVersionOther(1), dbuISDNSwitchVersionNational1(2), dbuISDNSwitchVersionATTP2P(3), dbuISDNSwitchVersionATTMP(4), dbuISDNSwitchVersionDMS100PVCIC0(5), dbuISDNSwitchVersionDMS100PVCIC1(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the switch version for the ISDN DBU." ::= { dbuConfigTableEntry 20 } dbuISDNTEI OBJECT-TYPE SYNTAX INTEGER { dbuISDNTEIOther(1), dbuISDNTEIDisable(2), dbuISDNTEIAuto(3), dbuISDNTEI0(4), dbuISDNTEI1(5), dbuISDNTEI2(6), dbuISDNTEI3(7), dbuISDNTEI4(8), dbuISDNTEI5(9), dbuISDNTEI6(10), dbuISDNTEI7(11), dbuISDNTEI8(12), dbuISDNTEI9(13), dbuISDNTEI10(14), dbuISDNTEI11(15), dbuISDNTEI12(16), dbuISDNTEI13(17), dbuISDNTEI14(18), dbuISDNTEI15(19), dbuISDNTEI16(20), dbuISDNTEI17(21), dbuISDNTEI18(22), dbuISDNTEI19(23), dbuISDNTEI20(24), dbuISDNTEI21(25), dbuISDNTEI22(26), dbuISDNTEI23(27), dbuISDNTEI24(28), dbuISDNTEI25(29), dbuISDNTEI26(30), dbuISDNTEI27(31), dbuISDNTEI28(32), dbuISDNTEI29(33), dbuISDNTEI30(34), dbuISDNTEI31(35), dbuISDNTEI32(36), dbuISDNTEI33(37), dbuISDNTEI34(38), dbuISDNTEI35(39), dbuISDNTEI36(40), dbuISDNTEI37(41), dbuISDNTEI38(42), dbuISDNTEI39(43), dbuISDNTEI40(44), dbuISDNTEI41(45), dbuISDNTEI42(46), dbuISDNTEI43(47), dbuISDNTEI44(48), dbuISDNTEI45(49), dbuISDNTEI46(50), dbuISDNTEI47(51), dbuISDNTEI48(52), dbuISDNTEI49(53), dbuISDNTEI50(54), dbuISDNTEI51(55), dbuISDNTEI52(56), dbuISDNTEI53(57), dbuISDNTEI54(58), dbuISDNTEI55(59), dbuISDNTEI56(60), dbuISDNTEI57(61), dbuISDNTEI58(62), dbuISDNTEI59(63), dbuISDNTEI60(64), dbuISDNTEI61(65), dbuISDNTEI62(66), dbuISDNTEI63(67) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the ISDN DBU TEI." ::= { dbuConfigTableEntry 21 } dbuISDNSPID OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the SPID for the ISDN DBU." ::= { dbuConfigTableEntry 22 } dbuISDNDDNUM OBJECT-TYPE SYNTAX DisplayString(SIZE(0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Data Directory Number for the ISDN DBU." ::= { dbuConfigTableEntry 23 } dbuResetStringsTable OBJECT-TYPE SYNTAX SEQUENCE OF DbuResetStringsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of COLD START reprogramming strings for the dial backup unit." ::= { dbu 2 } dbuResetStringsEntry OBJECT-TYPE SYNTAX DbuResetStringsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the dbuResetStringsTable." INDEX { dbuResetNearIndex, dbuResetFarIndex, dbuResetConfigEntryIndex, dbuResetStringsIndex } ::= { dbuResetStringsTable 1 } DbuResetStringsEntry ::= SEQUENCE { dbuResetNearIndex INTEGER, dbuResetFarIndex INTEGER, dbuResetConfigEntryIndex INTEGER, dbuResetStringsIndex INTEGER, dbuResetString DisplayString } dbuResetNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { dbuResetStringsEntry 1 } dbuResetFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { dbuResetStringsEntry 2 } dbuResetConfigEntryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the Dial Backup table." ::= { dbuResetStringsEntry 3 } dbuResetStringsIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the dbuResetStringsTable." ::= { dbuResetStringsEntry 4 } dbuResetString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..50) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is one of the dial backup unit's COLD START reprogramming strings" ::= { dbuResetStringsEntry 5 } dbuStartStopTable OBJECT-TYPE SYNTAX SEQUENCE OF DbuStartStopTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Dial Backup StartStop Table." ::= { dbu 3 } dbuStartStopTableEntry OBJECT-TYPE SYNTAX DbuStartStopTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Dial Backup Start Stop table." INDEX { dbuStartStopNearIndex, dbuStartStopFarIndex, dbuStartStopConfigEntryIndex, dbuStartStopDayOfWeek } ::= { dbuStartStopTable 1 } DbuStartStopTableEntry ::= SEQUENCE { dbuStartStopNearIndex INTEGER, dbuStartStopFarIndex INTEGER, dbuStartStopConfigEntryIndex INTEGER, dbuStartStopDayOfWeek INTEGER, dbuStart INTEGER, dbuStop INTEGER } dbuStartStopNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { dbuStartStopTableEntry 1 } dbuStartStopFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { dbuStartStopTableEntry 2 } dbuStartStopConfigEntryIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the Dial Backup table." ::= { dbuStartStopTableEntry 3 } dbuStartStopDayOfWeek OBJECT-TYPE SYNTAX INTEGER { dbuStartStopSunday(1), dbuStartStopMonday(2), dbuStartStopTuesday(3), dbuStartStopWednesday(4), dbuStartStopThursday(5), dbuStartStopFriday(6), dbuStartStopSaturday(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the Dial Backup Start Stop times table." ::= { dbuStartStopTableEntry 4 } dbuStart OBJECT-TYPE SYNTAX INTEGER { dbuStartHour00(1), dbuStartHour01(2), dbuStartHour02(3), dbuStartHour03(4), dbuStartHour04(5), dbuStartHour05(6), dbuStartHour06(7), dbuStartHour07(8), dbuStartHour08(9), dbuStartHour09(10), dbuStartHour10(11), dbuStartHour11(12), dbuStartHour12(13), dbuStartHour13(14), dbuStartHour14(15), dbuStartHour15(16), dbuStartHour16(17), dbuStartHour17(18), dbuStartHour18(19), dbuStartHour19(20), dbuStartHour20(21), dbuStartHour21(22), dbuStartHour22(23), dbuStartHour23(24) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the beginning of an allowable window for Dial Backup Activation." ::= { dbuStartStopTableEntry 5 } dbuStop OBJECT-TYPE SYNTAX INTEGER { dbuStopHour00(1), dbuStopHour01(2), dbuStopHour02(3), dbuStopHour03(4), dbuStopHour04(5), dbuStopHour05(6), dbuStopHour06(7), dbuStopHour07(8), dbuStopHour08(9), dbuStopHour09(10), dbuStopHour10(11), dbuStopHour11(12), dbuStopHour12(13), dbuStopHour13(14), dbuStopHour14(15), dbuStopHour15(16), dbuStopHour16(17), dbuStopHour17(18), dbuStopHour18(19), dbuStopHour19(20), dbuStopHour20(21), dbuStopHour21(22), dbuStopHour22(23), dbuStopHour23(24) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the end of an allowable window for Dial Backup Activation." ::= { dbuStartStopTableEntry 6 } -- t1e1 section, contains T1 and E1 Network and DTE interface table t1e1ConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF T1e1ConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The T1 and E1 Configuration Table." ::= { t1e1 1 } t1e1ConfigTableEntry OBJECT-TYPE SYNTAX T1e1ConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the t1e1Table." INDEX { t1e1ConfigNearIndex, t1e1ConfigFarIndex, t1e1ConfigIndex } ::= { t1e1ConfigTable 1 } T1e1ConfigTableEntry ::= SEQUENCE { t1e1ConfigNearIndex INTEGER, t1e1ConfigFarIndex INTEGER, t1e1ConfigIndex INTEGER, t1e1Description DisplayString, t1e1Mode INTEGER, t1e1FrameType INTEGER, t1e1LineCode INTEGER, t1e1LineBuildOut INTEGER, t1e1Timing INTEGER, t1e1StationInTiming INTEGER, t1e1StationTiming INTEGER, t1e1PRM INTEGER, t1e1ZeroSuppress INTEGER, t1e1NationalBit INTEGER, t1e1KeepAlive INTEGER, t1e1CRC4Mode INTEGER, t1e1DSXLevel INTEGER, t1e1CRC INTEGER, t1e1FDLPassThrough INTEGER, t1e1AudibleAlarm INTEGER, t1e1Function INTEGER, t1e1EBitGeneration INTEGER, t1e1RAIGeneration INTEGER, t1e1SpareBitInsertion INTEGER, t1e1Sa4In OCTET STRING, t1e1Sa5In OCTET STRING, t1e1Sa6In OCTET STRING, t1e1Sa7In OCTET STRING, t1e1Sa8In OCTET STRING, t1e1Sa4Out OCTET STRING, t1e1Sa5Out OCTET STRING, t1e1Sa6Out OCTET STRING, t1e1Sa7Out OCTET STRING, t1e1Sa8Out OCTET STRING } t1e1ConfigNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { t1e1ConfigTableEntry 1 } t1e1ConfigFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { t1e1ConfigTableEntry 2 } t1e1ConfigIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the index into the t1e1Table." ::= { t1e1ConfigTableEntry 3 } t1e1Description OBJECT-TYPE SYNTAX DisplayString( SIZE(0..40) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a textual description of the port." ::= { t1e1ConfigTableEntry 4 } t1e1Mode OBJECT-TYPE SYNTAX INTEGER { t1e1ModeOther(1), t1e1ModeDTE(2), t1e1ModeNetwork(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object identifies the port as either a Network (long-haul) or DTE (short-haul) port." ::= { t1e1ConfigTableEntry 5 } t1e1FrameType OBJECT-TYPE SYNTAX INTEGER { t1e1FrameTypeOther(1), t1e1FrameTypeESF(2), t1e1FrameTypeD4(3), t1e1FrameTypeCCSCRC(4), t1e1FrameTypeCCS(5), t1e1FrameTypeCAS(6), t1e1FrameTypeCASCRC(7), t1e1FrameTypeUnframed(8), t1e1FrameTypeV3(9), t1e1FrameTypeT1Unframed(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the framing for the network side of the DSU/CSU." ::= { t1e1ConfigTableEntry 6 } t1e1LineCode OBJECT-TYPE SYNTAX INTEGER { t1e1LineCodeOther(1), t1e1LineCodeAMI(2), t1e1LineCodeB8ZS(3), t1e1LineCodeHDB3(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the network side line coding." ::= { t1e1ConfigTableEntry 7 } t1e1LineBuildOut OBJECT-TYPE SYNTAX INTEGER { t1e1LineBuildOutOther(1), t1e1LineBuildOut0db(2), t1e1LineBuildOut75db(3), t1e1LineBuildOut15db(4), t1e1LineBuildOut225db(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the line build out for the network interface. The options are: t1e1LineBuildOut0db indicates a line build out of 0db t1e1LineBuildOut75db indicates a line build out of -7.5db t1e1LineBuildOut15db indicates a line build out of -15db t1e1LineBuildOut225db indicates a line build out of -22.5db" ::= { t1e1ConfigTableEntry 8 } t1e1Timing OBJECT-TYPE SYNTAX INTEGER { t1e1TimingOther(1), t1e1TimingInternal(2), t1e1TimingNetwork(3), t1e1TimingT1DTE(4), t1e1TimingStation(5), t1e1TimingStaClock(6), t1e1TimingPort1(7), t1e1TimingPort2(8), t1e1TimingPort3(9), t1e1TimingPort4(10), t1e1TimingPort5(11), t1e1TimingPort6(12), t1e1TimingPort7(13), t1e1TimingPort8(14), t1e1TimingPort9(15), t1e1TimingPort10(16), t1e1TimingPort11(17), t1e1TimingPort12(18), t1e1TimingPort13(19), t1e1TimingPort14(20), t1e1TimingPort15(21), t1e1TimingPort16(22), t1e1TimingPort17(23), t1e1TimingPort18(24), t1e1TimingPort19(25), t1e1TimingPort20(26), t1e1TimingPort21(27), t1e1TimingPort22(28), t1e1TimingPort23(29), t1e1TimingPort24(30), t1e1TimingPort25(31), t1e1TimingPort26(32), t1e1TimingPort27(33), t1e1TimingPort28(34), t1e1TimingPort29(35), t1e1TimingPort30(36), t1e1TimingPort31(37), t1e1TimingPort32(38), t1e1TimingSlot2PortA(39), t1e1TimingSlot2PortB(40), t1e1TimingSlot3PortA(41), t1e1TimingSlot3PortB(42), t1e1TimingSlot4PortA(43), t1e1TimingSlot4PortB(44), t1e1TimingSlot5PortA(45), t1e1TimingSlot5PortB(46), t1e1TimingSlot6PortA(47), t1e1TimingSlot6PortB(48), t1e1TimingSlot2Dsu1PortA(49), t1e1TimingSlot2Dsu1PortB(50), t1e1TimingSlot2Dsu2PortA(51), t1e1TimingSlot2Dsu2PortB(52), t1e1TimingSlot2Dsu3PortA(53), t1e1TimingSlot2Dsu3PortB(54), t1e1TimingSlot2Dsu4PortA(55), t1e1TimingSlot2Dsu4PortB(56), t1e1TimingSlot2Dsu5PortA(57), t1e1TimingSlot2Dsu5PortB(58), t1e1TimingSlot2Dsu6PortA(59), t1e1TimingSlot2Dsu6PortB(60), t1e1TimingSlot3Dsu1PortA(61), t1e1TimingSlot3Dsu1PortB(62), t1e1TimingSlot3Dsu2PortA(63), t1e1TimingSlot3Dsu2PortB(64), t1e1TimingSlot3Dsu3PortA(65), t1e1TimingSlot3Dsu3PortB(66), t1e1TimingSlot3Dsu4PortA(67), t1e1TimingSlot3Dsu4PortB(68), t1e1TimingSlot3Dsu5PortA(69), t1e1TimingSlot3Dsu5PortB(70), t1e1TimingSlot3Dsu6PortA(71), t1e1TimingSlot3Dsu6PortB(72), t1e1TimingSlot4Dsu1PortA(73), t1e1TimingSlot4Dsu1PortB(74), t1e1TimingSlot4Dsu2PortA(75), t1e1TimingSlot4Dsu2PortB(76), t1e1TimingSlot4Dsu3PortA(77), t1e1TimingSlot4Dsu3PortB(78), t1e1TimingSlot4Dsu4PortA(79), t1e1TimingSlot4Dsu4PortB(80), t1e1TimingSlot4Dsu5PortA(81), t1e1TimingSlot4Dsu5PortB(82), t1e1TimingSlot4Dsu6PortA(83), t1e1TimingSlot4Dsu6PortB(84), t1e1TimingSlot5Dsu1PortA(85), t1e1TimingSlot5Dsu1PortB(86), t1e1TimingSlot5Dsu2PortA(87), t1e1TimingSlot5Dsu2PortB(88), t1e1TimingSlot5Dsu3PortA(89), t1e1TimingSlot5Dsu3PortB(90), t1e1TimingSlot5Dsu4PortA(91), t1e1TimingSlot5Dsu4PortB(92), t1e1TimingSlot5Dsu5PortA(93), t1e1TimingSlot5Dsu5PortB(94), t1e1TimingSlot5Dsu6PortA(95), t1e1TimingSlot5Dsu6PortB(96), t1e1TimingSlot6Dsu1PortA(97), t1e1TimingSlot6Dsu1PortB(98), t1e1TimingSlot6Dsu2PortA(99), t1e1TimingSlot6Dsu2PortB(100), t1e1TimingSlot6Dsu3PortA(101), t1e1TimingSlot6Dsu3PortB(102), t1e1TimingSlot6Dsu4PortA(103), t1e1TimingSlot6Dsu4PortB(104), t1e1TimingSlot6Dsu5PortA(105), t1e1TimingSlot6Dsu5PortB(106), t1e1TimingSlot6Dsu6PortA(107), t1e1TimingSlot6Dsu6PortB(108) } MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the timing source to synchronize the unit's internal timing generators." ::= { t1e1ConfigTableEntry 9 } t1e1StationInTiming OBJECT-TYPE SYNTAX INTEGER { t1e1StationInTimingOther(1), t1e1StationInTimingNX56(2), t1e1StationInTimingNX64(3), t1e1StationInTiming1544(4), t1e1StationInTiming2048(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the input timing if t1e1Timing is set to Station." ::= { t1e1ConfigTableEntry 10 } t1e1StationTiming OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the N-multiple when Station Input Timing is set to either NX56 or NX65. The N range is 1..24" ::= { t1e1ConfigTableEntry 11 } t1e1PRM OBJECT-TYPE SYNTAX INTEGER { t1e1PRMOther(1), t1e1PRMDisable(2), t1e1PRMEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enables the ANSI T1.403 Performance Report Message functions." ::= { t1e1ConfigTableEntry 12 } t1e1ZeroSuppress OBJECT-TYPE SYNTAX INTEGER { t1e1ZeroOther(1), t1e1ZeroDisable(2), t1e1ZeroEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether ones density insertion is activated after 15 zeros . To ensure compliance with TR54016, this field must be enabled." ::= { t1e1ConfigTableEntry 13 } t1e1NationalBit OBJECT-TYPE SYNTAX INTEGER { t1e1NationalOther(1), t1e1NationalNone(2), t1e1NationalSA4(3), t1e1NationalSA5(4), t1e1NationalSA6(5), t1e1NationalSA7(6), t1e1NationalSA8(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects a national bit to create a 4-kbps datalink between the endpoint units." ::= { t1e1ConfigTableEntry 14 } t1e1KeepAlive OBJECT-TYPE SYNTAX INTEGER { t1e1KeepAliveOther(1), t1e1KeepAliveUnframedOnes(2), t1e1KeepAliveFramedOnes(3), t1e1KeepAliveLoop(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects keep alive framed and unframed ones when the unit detects LOS or OOF." ::= { t1e1ConfigTableEntry 15 } t1e1CRC4Mode OBJECT-TYPE SYNTAX INTEGER { t1e1CRC4Other(1), t1e1CRC4Disabled(2), t1e1CRC4Enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects whether CRC4 is enabled or disabled." ::= { t1e1ConfigTableEntry 16 } t1e1DSXLevel OBJECT-TYPE SYNTAX INTEGER { t1e1DSXOther(1), t1e1DSX0110(2), t1e1DSX111220(3), t1e1DSX221330(4), t1e1DSX331440(5), t1e1DSX441550(6), t1e1DSX551660(7), t1e1DSX661up(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the DSX1 interface output level." ::= { t1e1ConfigTableEntry 17 } t1e1CRC OBJECT-TYPE SYNTAX INTEGER { t1e1CRCOther(1), t1e1CRCPass(2), t1e1CRCRegenerate(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether received CRC data is passed through or regenerated." ::= { t1e1ConfigTableEntry 18 } t1e1FDLPassThrough OBJECT-TYPE SYNTAX INTEGER { t1e1FDLPassThroughOther(1), t1e1FDLPassThroughPass(2), t1e1FDLPassThroughTerminate(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines whether the ESF FDL passes through the CSU or terminates." ::= { t1e1ConfigTableEntry 19 } t1e1AudibleAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1AudibleAlarmOther(1), t1e1AudibleAlarmDisabled(2), t1e1AudibleAlarmEnabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If applicable, Enables or Disables the CSU's internal buzzer which alerts users of an alarm condition." ::= { t1e1ConfigTableEntry 20 } t1e1Function OBJECT-TYPE SYNTAX INTEGER { t1e1FunctionOther(1), t1e1FunctionNetwork(2), t1e1FunctionSlaved(3), t1e1FunctionBackup(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the function the network port will perform in the unit. The options are: t1e1FunctionNetwork (Independent network port) t1e1FunctionSlaved (Slaved to another network port) t1e1FunctionBackup (Automatic Protection Switching Backup for another network port)" ::= { t1e1ConfigTableEntry 21 } t1e1EBitGeneration OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 22 } t1e1RAIGeneration OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 23 } t1e1SpareBitInsertion OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 24 } t1e1Sa4In OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 25 } t1e1Sa5In OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 26 } t1e1Sa6In OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 27 } t1e1Sa7In OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 28 } t1e1Sa8In OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-only STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 29 } t1e1Sa4Out OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 30 } t1e1Sa5Out OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 31 } t1e1Sa6Out OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 32 } t1e1Sa7Out OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 33 } t1e1Sa8Out OBJECT-TYPE SYNTAX OCTET STRING( SIZE(8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "" ::= { t1e1ConfigTableEntry 34 } t1e1AlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF T1e1AlarmTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The T1 and E1 Alarm Table." ::= { t1e1 2 } t1e1AlarmTableEntry OBJECT-TYPE SYNTAX T1e1AlarmTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the t1e1Table." INDEX { t1e1AlarmNearIndex, t1e1AlarmFarIndex, t1e1AlarmIndex } ::= { t1e1AlarmTable 1 } T1e1AlarmTableEntry ::= SEQUENCE { t1e1AlarmNearIndex INTEGER, t1e1AlarmFarIndex INTEGER, t1e1AlarmIndex INTEGER, t1e1StatusSummary DisplayString, t1e1AlarmSummary DisplayString, t1e1ESStatus INTEGER, t1e1ESCount INTEGER, t1e1ESThreshold INTEGER, t1e1ESAlarm INTEGER, t1e1SESStatus INTEGER, t1e1SESCount INTEGER, t1e1SESThreshold INTEGER, t1e1SESAlarm INTEGER, t1e1LOSSStatus INTEGER, t1e1LOSSCount INTEGER, t1e1LOSSThreshold INTEGER, t1e1LOSSAlarm INTEGER, t1e1UASStatus INTEGER, t1e1UASCount INTEGER, t1e1UASThreshold INTEGER, t1e1UASAlarm INTEGER, t1e1CSSStatus INTEGER, t1e1CSSCount INTEGER, t1e1CSSThreshold INTEGER, t1e1CSSAlarm INTEGER, t1e1BPVSStatus INTEGER, t1e1BPVSCount INTEGER, t1e1BPVSThreshold INTEGER, t1e1BPVSAlarm INTEGER, t1e1OOFSStatus INTEGER, t1e1OOFSCount INTEGER, t1e1OOFSThreshold INTEGER, t1e1OOFSAlarm INTEGER, t1e1AISStatus INTEGER, t1e1AISCount INTEGER, t1e1AISThreshold INTEGER, t1e1AISAlarm INTEGER, t1e1RASStatus INTEGER, t1e1RASCount INTEGER, t1e1RASThreshold INTEGER, t1e1RASAlarm INTEGER, t1e1AlarmResetTimer INTEGER, t1e1AlarmReset INTEGER } t1e1AlarmNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { t1e1AlarmTableEntry 1 } t1e1AlarmFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { t1e1AlarmTableEntry 2 } t1e1AlarmIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object is the index into the t1e1Table." ::= { t1e1AlarmTableEntry 3 } t1e1StatusSummary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the port status." ::= { t1e1AlarmTableEntry 4 } t1e1AlarmSummary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the port alarms." ::= { t1e1AlarmTableEntry 5 } t1e1ESStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoES(2), t1e1StatusES(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if an Errored Second condition exists." ::= { t1e1AlarmTableEntry 6 } t1e1ESCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds an Errored Second condition has existed." ::= { t1e1AlarmTableEntry 7 } t1e1ESThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Errored Seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 8 } t1e1ESAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1ESAlarmOther(1), t1e1ESAlarmNone(2), t1e1ESAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Errors Seconds threshold is exceeded." ::= { t1e1AlarmTableEntry 9 } t1e1SESStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoSES(2), t1e1StatusSES(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Severely Errored condition exists." ::= { t1e1AlarmTableEntry 10 } t1e1SESCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds a Severely Errored condition has existed." ::= { t1e1AlarmTableEntry 11 } t1e1SESThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Severely Errored seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 12 } t1e1SESAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1SESAlarmOther(1), t1e1SESAlarmNone(2), t1e1SESAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Severely Errors Seconds threshold is exceeded." ::= { t1e1AlarmTableEntry 13 } t1e1LOSSStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoLOSS(2), t1e1StatusLOSS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Loss of Signal condition exists." ::= { t1e1AlarmTableEntry 14 } t1e1LOSSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds a Loss of Signal condition has existed." ::= { t1e1AlarmTableEntry 15 } t1e1LOSSThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Loss of Signal seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 16 } t1e1LOSSAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1LOSSAlarmOther(1), t1e1LOSSAlarmNone(2), t1e1LOSSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Loss of Signal Seconds threshold is exceeded." ::= { t1e1AlarmTableEntry 17 } t1e1UASStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoUAS(2), t1e1StatusUAS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if an Unavailable condition exists." ::= { t1e1AlarmTableEntry 18 } t1e1UASCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds an Unavailable condition has existed." ::= { t1e1AlarmTableEntry 19 } t1e1UASThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the unavailable seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 20 } t1e1UASAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1UASAlarmOther(1), t1e1UASAlarmNone(2), t1e1UASAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Unavailable Seconds threshold is exceeded." ::= { t1e1AlarmTableEntry 21 } t1e1CSSStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoCSS(2), t1e1StatusCSS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Controlled Slip condition exists." ::= { t1e1AlarmTableEntry 22 } t1e1CSSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds in which at least one Controlled Slip occurred." ::= { t1e1AlarmTableEntry 23 } t1e1CSSThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Controlled Slip seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 24 } t1e1CSSAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1CSSAlarmOther(1), t1e1CSSAlarmNone(2), t1e1CSSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Controlled Slip seconds threshold is exceeded." ::= { t1e1AlarmTableEntry 25 } t1e1BPVSStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoBPVS(2), t1e1StatusBPVS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Bipolar Violation Error condition exists." ::= { t1e1AlarmTableEntry 26 } t1e1BPVSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds a Bipolar Violation Error condition has existed." ::= { t1e1AlarmTableEntry 27 } t1e1BPVSThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Bipolar Violation Error seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 28 } t1e1BPVSAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1BPVSAlarmOther(1), t1e1BPVSAlarmNone(2), t1e1BPVSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Bipolar Violation Error seconds threshold is exceeded." ::= { t1e1AlarmTableEntry 29 } t1e1OOFSStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoOOF(2), t1e1StatusOOF(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the unit is unable to synchronize on the incoming framing pattern." ::= { t1e1AlarmTableEntry 30 } t1e1OOFSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds an OOF condition has existed." ::= { t1e1AlarmTableEntry 31 } t1e1OOFSThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the OOF seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 32 } t1e1OOFSAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1OOFSAlarmOther(1), t1e1OOFSAlarmNone(2), t1e1OOFSAlarmExists(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if an OOF seconds alarm condition exists." ::= { t1e1AlarmTableEntry 33 } t1e1AISStatus OBJECT-TYPE SYNTAX INTEGER { t1e1StatusOther(1), t1e1StatusNoAIS(2), t1e1StatusAIS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the unit is receiving an unframed all ones pattern." ::= { t1e1AlarmTableEntry 34 } t1e1AISCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds an Unframed All Ones condition has existed." ::= { t1e1AlarmTableEntry 35 } t1e1AISThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the AIS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 36 } t1e1AISAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1AISAlarmOther(1), t1e1AISAlarmNone(2), t1e1AISAlarmExists(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if an Unframed All Ones alarm condition exists." ::= { t1e1AlarmTableEntry 37 } t1e1RASStatus OBJECT-TYPE SYNTAX INTEGER { t1e1RASStatusOther(1), t1e1RASStatusNoRAS(2), t1e1RASStatusRAS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Remote (Yellow) Alarm condition exists." ::= { t1e1AlarmTableEntry 38 } t1e1RASCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds a Remote (Yellow) Alarm condition has existed." ::= { t1e1AlarmTableEntry 39 } t1e1RASThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the RAS seconds alarm threshold. Setting this field to 0 disables the alarm. The threshold can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 40 } t1e1RASAlarm OBJECT-TYPE SYNTAX INTEGER { t1e1RASAlarmOther(1), t1e1RASAlarmNone(2), t1e1RASAlarmExists(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if a Remote (Yellow) Alarm exists." ::= { t1e1AlarmTableEntry 41 } t1e1AlarmResetTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900." ::= { t1e1AlarmTableEntry 42 } t1e1AlarmReset OBJECT-TYPE SYNTAX INTEGER { t1e1AlarmResetOther(1), t1e1AlarmResetClearAlarms(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to clear the current alarm counts." ::= { t1e1AlarmTableEntry 43 } -- ddsNet section, contains DDS Network interface table ddsNetConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF DdsNetConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dds Network Interface Configuration Table." ::= { ddsNet 1 } ddsNetConfigTableEntry OBJECT-TYPE SYNTAX DdsNetConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Network Interface Table." INDEX { ddsNetConfigNearIndex, ddsNetConfigFarIndex, ddsNetConfigIndex } ::= { ddsNetConfigTable 1 } DdsNetConfigTableEntry ::= SEQUENCE { ddsNetConfigNearIndex INTEGER, ddsNetConfigFarIndex INTEGER, ddsNetConfigIndex INTEGER, ddsNetDescription DisplayString, ddsNetRate INTEGER, ddsNetMode INTEGER, ddsNetTimingSource INTEGER, ddsNetRemComm INTEGER, ddsNetCircuitAssur INTEGER, ddsNetAntiStrTimer INTEGER } ddsNetConfigNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { ddsNetConfigTableEntry 1 } ddsNetConfigFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { ddsNetConfigTableEntry 2 } ddsNetConfigIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the ddsNetConfigTable." ::= { ddsNetConfigTableEntry 3 } ddsNetDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..40) ) MAX-ACCESS read-write STATUS current DESCRIPTION "Contains a textual description of the port." ::= { ddsNetConfigTableEntry 4 } ddsNetRate OBJECT-TYPE SYNTAX INTEGER { ddsNetRate2400(1), ddsNetRate4800(2), ddsNetRate9600(3), ddsNetRate19200(4), ddsNetRate38400(5), ddsNetRate56000(6), ddsNetRate64000(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current DDS network rate. The values mean: ddsNetRate2400 the DDS network interface is operating at 2400bps ddsNetRate4800 the DDS network interface is operating at 4800bps ddsNetRate9600 the DDS network interface is operating at 9600bps ddsNetRate19200 the DDS network interface is operating at 19200bps ddsNetRate38400 the DDS network interface is operating at 38400bps ddsNetRate56000 the DDS network interface is operating at 56000bps ddsNetRate64000 the DDS network interface is operating at 64000bps" ::= { ddsNetConfigTableEntry 5 } ddsNetMode OBJECT-TYPE SYNTAX INTEGER { ddsNetModeNormal(1), ddsNetModeProprietaryTXPI(2), ddsNetMode64KClearChannel(3), ddsNetMode64KCCProprietaryTXPII(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes mode in which data is being sent from the DDS unit back towards the network. Changing the value of this variable can cause a loss of remote communications. The values mean: ddsNetModeNormal (DDS-I) normal data mode of operation ddsNetModeProprietaryTXPI (DDS-I) data being sent out on the DDS network is in a proprietary mode to allow for remote communications, rate adaption, and SYNC to ASYNC modes ddsNetMode64KClearChannel (DDS-II) A special case of DDS-II, where the line rate is 72K, the data rate is 64K, and there is no secondary channel. ddsNetMode64KCCProprietaryTXPII (DDS-II) A special case of DDS-II, where the line rate is 72K, the data rate is 64K, and there is no secondary channel. In addition, the data being sent out on the DDS network is in a proprietary mode to allow for remote communications, rate adaption, SYNC to ASYNC, and/or TDM modes." ::= { ddsNetConfigTableEntry 6 } ddsNetTimingSource OBJECT-TYPE SYNTAX INTEGER { ddsNetTimingNet(1), ddsNetTimingInt(2), ddsNetTimingDTE(3), ddsNetTimingPort1(4), ddsNetTimingPort2(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the current timing source for the DDS network interface. The values mean: ddsNetTimingNet unit dependant upon network for DDS network interface timing ddsNetTimingInt unit supplying timing for DDS network interface ddsNetTimingDTE unit dependant upon DTE device for network interface timing ddsNetTimingPort1 unit dependant upon serial port 1 device for network interface timing ddsNetTimingPort2 unit dependant upon serial port 2 device for network interface timing" ::= { ddsNetConfigTableEntry 7 } ddsNetRemComm OBJECT-TYPE SYNTAX INTEGER { ddsNetRemCommEnabled(1), ddsNetRemCommDisabled(2), ddsNetRemCommNotAvailable(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This variable describes the current setting for the remote communications link. The values mean: ddsNetRemCommEnabled remote communications can be carried out end to end ddsNetRemCommDisabled remote communications are not allowed ddsNetRemCommNotAvailable this unit does not support remote communications" ::= { ddsNetConfigTableEntry 8 } ddsNetCircuitAssur OBJECT-TYPE SYNTAX INTEGER { ddsNetCircuitAssurEnabled(1), ddsNetCircuitAssurDisabled(2), ddsNetCircuitAssurNotAvailable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the current setting for the circuit assurance option. The values mean: ddsNetCircuitAssurEnabled Circuit Assurance is enabled and the integrity of the DDS loop will be maintained ddsNetCircuitAssurDisabled Circuit Assurance is disabled ddsNetCircuitAssurNotAvailable this unit does not support Circuit Assurance" ::= { ddsNetConfigTableEntry 9 } ddsNetAntiStrTimer OBJECT-TYPE SYNTAX INTEGER { ddsNetAntiStrTimerOff(1), ddsNetAntiStrTimer10(2), ddsNetAntiStrTimer30(3), ddsNetAntiStrTimer60(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the current setting for the anti streaming timer. The values mean: ddsNetAntiStrTimerOff the AntiStreaming Timer is off ddsNetAntiStrTimer10 the AntiStreaming Timer is set to 10 seconds ddsNetAntiStrTimer30 the AntiStreaming Timer is set to 30 seconds ddsNetAntiStrTimer60 the AntiStreaming Timer is set to 60 seconds" ::= { ddsNetConfigTableEntry 10 } ddsNetAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF DdsNetAlarmTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The dds Network Interface Alarm Table." ::= { ddsNet 2 } ddsNetAlarmTableEntry OBJECT-TYPE SYNTAX DdsNetAlarmTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ddsNetAlarmTable." INDEX { ddsNetAlarmNearIndex, ddsNetAlarmFarIndex, ddsNetAlarmIndex } ::= { ddsNetAlarmTable 1 } DdsNetAlarmTableEntry ::= SEQUENCE { ddsNetAlarmNearIndex INTEGER, ddsNetAlarmFarIndex INTEGER, ddsNetAlarmIndex INTEGER, ddsNetStatusSummary DisplayString, ddsNetAlarmSummary DisplayString, ddsNetLOSStatus INTEGER, ddsNetLOSCount INTEGER, ddsNetLOSThreshold INTEGER, ddsNetLOSAlarm INTEGER, ddsNetOOFStatus INTEGER, ddsNetOOFCount INTEGER, ddsNetOOFThreshold INTEGER, ddsNetOOFAlarm INTEGER, ddsNetOOSStatus INTEGER, ddsNetOOSCount INTEGER, ddsNetOOSThreshold INTEGER, ddsNetOOSAlarm INTEGER, ddsNetFDLStatus INTEGER, ddsNetFDLCount INTEGER, ddsNetFDLThreshold INTEGER, ddsNetFDLAlarm INTEGER, ddsNetAlarmResetTimer INTEGER, ddsNetAlarmReset INTEGER, ddsNetBPVStatus INTEGER, ddsNetBPVCount INTEGER, ddsNetBPVThreshold INTEGER, ddsNetBPVAlarm INTEGER } ddsNetAlarmNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { ddsNetAlarmTableEntry 1 } ddsNetAlarmFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { ddsNetAlarmTableEntry 2 } ddsNetAlarmIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the ddsNetAlarmTable." ::= { ddsNetAlarmTableEntry 3 } ddsNetStatusSummary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the port status." ::= { ddsNetAlarmTableEntry 4 } ddsNetAlarmSummary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the port alarms." ::= { ddsNetAlarmTableEntry 5 } ddsNetLOSStatus OBJECT-TYPE SYNTAX INTEGER { ddsNetStatusLOSOther(1), ddsNetStatusNoLOS(2), ddsNetStatusLOS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Loss of Signal condition exists." ::= { ddsNetAlarmTableEntry 6 } ddsNetLOSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds the unit received signal has been interrupted." ::= { ddsNetAlarmTableEntry 7 } ddsNetLOSThreshold OBJECT-TYPE SYNTAX INTEGER { ddsNetLOSThresholdOther(1), ddsNetLOSThresholdNone(2), ddsNetLOSThreshold1(3), ddsNetLOSThreshold2(4), ddsNetLOSThreshold3(5), ddsNetLOSThreshold4(6), ddsNetLOSThreshold5(7), ddsNetLOSThreshold10(8), ddsNetLOSThreshold20(9), ddsNetLOSThreshold30(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "A period, measured in seconds, in which the DDS received signal is interrupted." ::= { ddsNetAlarmTableEntry 8 } ddsNetLOSAlarm OBJECT-TYPE SYNTAX INTEGER { ddsNetLOSAlarmOther(1), ddsNetLOSAlarmNone(2), ddsNetLOSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Loss of Signal Seconds threshold is exceeded." ::= { ddsNetAlarmTableEntry 9 } ddsNetOOFStatus OBJECT-TYPE SYNTAX INTEGER { ddsNetStatusOOFOther(1), ddsNetStatusNoOOF(2), ddsNetStatusOOF(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if an Out of Frame condition exists." ::= { ddsNetAlarmTableEntry 10 } ddsNetOOFCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds the unit has received the out of frame code." ::= { ddsNetAlarmTableEntry 11 } ddsNetOOFThreshold OBJECT-TYPE SYNTAX INTEGER { ddsNetOOFThresholdOther(1), ddsNetOOFThresholdNone(2), ddsNetOOFThreshold1(3), ddsNetOOFThreshold2(4), ddsNetOOFThreshold3(5), ddsNetOOFThreshold4(6), ddsNetOOFThreshold5(7), ddsNetOOFThreshold10(8), ddsNetOOFThreshold20(9), ddsNetOOFThreshold30(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "A period, measured in seconds, in which the Out Of Frame code is received or a frame sync loss occurred." ::= { ddsNetAlarmTableEntry 12 } ddsNetOOFAlarm OBJECT-TYPE SYNTAX INTEGER { ddsNetOOFSAlarmOther(1), ddsNetOOFSAlarmNone(2), ddsNetOOFSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Out of Frame Seconds threshold is exceeded." ::= { ddsNetAlarmTableEntry 13 } ddsNetOOSStatus OBJECT-TYPE SYNTAX INTEGER { ddsNetStatusOOSOther(1), ddsNetStatusNoOOS(2), ddsNetStatusOOS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if Out of Service codes are received." ::= { ddsNetAlarmTableEntry 14 } ddsNetOOSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds the unit has received the out of service code." ::= { ddsNetAlarmTableEntry 15 } ddsNetOOSThreshold OBJECT-TYPE SYNTAX INTEGER { ddsNetOOSThresholdOther(1), ddsNetOOSThresholdNone(2), ddsNetOOSThreshold1(3), ddsNetOOSThreshold2(4), ddsNetOOSThreshold3(5), ddsNetOOSThreshold4(6), ddsNetOOSThreshold5(7), ddsNetOOSThreshold10(8), ddsNetOOSThreshold20(9), ddsNetOOSThreshold30(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "A period, measured in seconds, in which the Out Of Service code is received." ::= { ddsNetAlarmTableEntry 16 } ddsNetOOSAlarm OBJECT-TYPE SYNTAX INTEGER { ddsNetOOSAlarmOther(1), ddsNetOOSAlarmNone(2), ddsNetOOSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Out of Service Seconds threshold is exceeded." ::= { ddsNetAlarmTableEntry 17 } ddsNetFDLStatus OBJECT-TYPE SYNTAX INTEGER { ddsNetStatusFDLOther(1), ddsNetStatusNoFDL(2), ddsNetStatusFDL(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if Facility Data Link errors have occurred." ::= { ddsNetAlarmTableEntry 18 } ddsNetFDLCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds in which FDL errors have occurred." ::= { ddsNetAlarmTableEntry 19 } ddsNetFDLThreshold OBJECT-TYPE SYNTAX INTEGER { ddsNetFDLThresholdOther(1), ddsNetFDLThresholdNone(2), ddsNetFDLThreshold1(3), ddsNetFDLThreshold2(4), ddsNetFDLThreshold3(5), ddsNetFDLThreshold4(6), ddsNetFDLThreshold5(7), ddsNetFDLThreshold10(8), ddsNetFDLThreshold20(9), ddsNetFDLThreshold30(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "A period, measured in seconds, in which FDL errors have occurred." ::= { ddsNetAlarmTableEntry 20 } ddsNetFDLAlarm OBJECT-TYPE SYNTAX INTEGER { ddsNetFDLAlarmOther(1), ddsNetFDLAlarmNone(2), ddsNetFDLAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Facility Data Link threshold is exceeded." ::= { ddsNetAlarmTableEntry 21 } ddsNetAlarmResetTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the Alarm Reset Timer, this field can be set to any value in the range 0 to 900." ::= { ddsNetAlarmTableEntry 22 } ddsNetAlarmReset OBJECT-TYPE SYNTAX INTEGER { ddsNetAlarmResetOther(1), ddsNetAlarmResetClearAlarms(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is used to clear the current alarm counts." ::= { ddsNetAlarmTableEntry 23 } ddsNetBPVStatus OBJECT-TYPE SYNTAX INTEGER { ddsNetStatusBPVOther(1), ddsNetStatusNoBPV(2), ddsNetStatusBPV(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if a Bipolar violation event occurred in the last second." ::= { ddsNetAlarmTableEntry 24 } ddsNetBPVCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of consecutive seconds the unit received bipolar violations." ::= { ddsNetAlarmTableEntry 25 } ddsNetBPVThreshold OBJECT-TYPE SYNTAX INTEGER { ddsNetBPVThresholdOther(1), ddsNetBPVThresholdNone(2), ddsNetBPVThreshold1(3), ddsNetBPVThreshold2(4), ddsNetBPVThreshold3(5), ddsNetBPVThreshold4(6), ddsNetBPVThreshold5(7), ddsNetBPVThreshold10(8), ddsNetBPVThreshold20(9), ddsNetBPVThreshold30(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "A period, measured in seconds, in which the unit receives bipolar violations before an alarm is triggered." ::= { ddsNetAlarmTableEntry 26 } ddsNetBPVAlarm OBJECT-TYPE SYNTAX INTEGER { ddsNetBPVAlarmOther(1), ddsNetBPVAlarmNone(2), ddsNetBPVAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the Bipolar violation Seconds threshold is exceeded." ::= { ddsNetAlarmTableEntry 27 } -- serialDte section serialDteConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SerialDteConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Serial DTE Config Table." ::= { serialDte 1 } serialDteConfigTableEntry OBJECT-TYPE SYNTAX SerialDteConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the serial DTE Config Table." INDEX { serialDteConfigNearIndex, serialDteConfigFarIndex, serialDteConfigIndex } ::= { serialDteConfigTable 1 } SerialDteConfigTableEntry ::= SEQUENCE { serialDteConfigNearIndex INTEGER, serialDteConfigFarIndex INTEGER, serialDteConfigIndex INTEGER, serialDteDescription DisplayString, serialDteType INTEGER, serialDteRate INTEGER, serialDteInvertData INTEGER, serialDteFormat INTEGER, serialDteParity INTEGER, serialDteStopBit INTEGER, serialDteMode INTEGER, serialDteDSR INTEGER, serialDteDCD INTEGER, serialDteRTS INTEGER, serialDteRTSDelay INTEGER, serialDteDTR INTEGER, serialDteCTS INTEGER, serialDteV54 INTEGER, serialDteLL INTEGER, serialDteRL INTEGER, serialDteStartChannel INTEGER, serialDteNumberOfChannels INTEGER, serialDteTxClock INTEGER, serialDteBundle INTEGER, serialDteChannelRate INTEGER, serialDteInvertClock INTEGER, serialDteCharSize INTEGER, serialDteFlowControl INTEGER, serialDtePinStatus DisplayString, serialDteInInvertClock INTEGER } serialDteConfigNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { serialDteConfigTableEntry 1 } serialDteConfigFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { serialDteConfigTableEntry 2 } serialDteConfigIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the DteTable." ::= { serialDteConfigTableEntry 3 } serialDteDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..40) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a textual description of the port." ::= { serialDteConfigTableEntry 4 } serialDteType OBJECT-TYPE SYNTAX INTEGER { serialDteTypeOther(1), serialDteTypeV35(2), serialDteTypeRS232(3), serialDteTypeEIA530(4), serialDteTypeX21(5), serialDteTypeV36(6), serialDteTypeEIA530A(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the DTE port type if applicable." ::= { serialDteConfigTableEntry 5 } serialDteRate OBJECT-TYPE SYNTAX INTEGER { serialDteRateOther(1), serialDteRate2400(2), serialDteRate4800(3), serialDteRate9600(4), serialDteRate19200(5), serialDteRate38400(6), serialDteRate52000(7), serialDteRate56000(8), serialDteRate57600(9), serialDteRate60000(10), serialDteRate64000(11), serialDteRate112000(12), serialDteRate128000(13), serialDteRate168000(14), serialDteRate192000(15), serialDteRate224000(16), serialDteRate256000(17), serialDteRate280000(18), serialDteRate320000(19), serialDteRate336000(20), serialDteRate384000(21), serialDteRate392000(22), serialDteRate448000(23), serialDteRate504000(24), serialDteRate512000(25), serialDteRate560000(26), serialDteRate576000(27), serialDteRate616000(28), serialDteRate640000(29), serialDteRate672000(30), serialDteRate704000(31), serialDteRate728000(32), serialDteRate768000(33), serialDteRate784000(34), serialDteRate832000(35), serialDteRate840000(36), serialDteRate896000(37), serialDteRate952000(38), serialDteRate960000(39), serialDteRate1008000(40), serialDteRate1024000(41), serialDteRate1064000(42), serialDteRate1088000(43), serialDteRate1120000(44), serialDteRate1152000(45), serialDteRate1176000(46), serialDteRate1216000(47), serialDteRate1232000(48), serialDteRate1280000(49), serialDteRate1288000(50), serialDteRate1344000(51), serialDteRate1400000(52), serialDteRate1408000(53), serialDteRate1456000(54), serialDteRate1472000(55), serialDteRate1512000(56), serialDteRate1536000(57), serialDteRate1568000(58), serialDteRate1600000(59), serialDteRate1624000(60), serialDteRate1664000(61), serialDteRate1680000(62), serialDteRate1728000(63), serialDteRate1736000(64), serialDteRate1792000(65), serialDteRate1856000(66), serialDteRate1920000(67), serialDteRate1984000(68), serialDteRate2048000(69), serialDteRate1200(70), serialDteRate14400(71), serialDteRate28800(72), serialDteRate48000(73), serialDteRate31200(74), serialDteRate115200(75), serialDteRate2112000(76), serialDteRate2176000(77), serialDteRate2240000(78), serialDteRate2304000(79), serialDteRate300(80), serialDteRate600(81), serialDteRate3072000(82), serialDteRate4096000(83) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the DTE port bit." ::= { serialDteConfigTableEntry 6 } serialDteInvertData OBJECT-TYPE SYNTAX INTEGER { serialDteInvertDataOther(1), serialDteInvertDataDisabled(2), serialDteInvertDataEnabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies whether transmit and receive are inverted at the port." ::= { serialDteConfigTableEntry 7 } serialDteFormat OBJECT-TYPE SYNTAX INTEGER { serialDteFormatOther(1), serialDteFormatSync(2), serialDteFormatAsync(3), serialDteFormatNotAvail(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the current operations format of the DTE interface. The values mean: serialDteFormatSync The DTE interface is currently set to operate in Synchronous clocking format serialDteFormatAsync The DTE interface is currently set to operate in the Asynchronous clocking format serialDteFormatNotAvail The DTE interface operating format is not available" ::= { serialDteConfigTableEntry 8 } -- The DTE Parity is only valid when the DTE Mode is set to ASYNC serialDteParity OBJECT-TYPE SYNTAX INTEGER { serialDteParityOther(1), serialDteParityNone(2), serialDteParityOdd(3), serialDteParityEven(4), serialDteParityMark(5), serialDteParitySpace(6), serialDteParityNotAvail(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the current parity selected for the DTE interface. This variable is only valid when the DTE Mode is set to ASYNC. The values mean: serialDteParityNone The DTE interface is currently set for no parity bit checking or generation serialDteParityOdd The DTE interface is currently set for odd parity serialDteParityEven The DTE interface is currently set for even parity serialDteParityMark The DTE interface is currently set for mark parity serialDteParitySpace The DTE interface is currently set for space parity serialDteParityNotAvail The parity setting on the DTE interface is not available." ::= { serialDteConfigTableEntry 9 } -- The Stop bit setting is only valid when the DTE interface is set to -- ASYNC operation. serialDteStopBit OBJECT-TYPE SYNTAX INTEGER { serialDteStopBitOther(1), serialDteStopBit1(2), serialDteStopBit2(3), serialDteStopBitNotAvail(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes the stop bit setting for the DTE interface. This variable is only valid when the DTE interface is set to ASYNC. The values mean: serialDteStopBit1 The DTE interface is configured to operate in the ASYNC mode with 1 stop bit serialDteStopBit2 The DTE interface is configured to operate in the ASYNC mode with 2 stop bits serialDteStopBitNotAvail The stop bit information is not available. The DTE interface is probably configured for synchronous operation." ::= { serialDteConfigTableEntry 10 } serialDteMode OBJECT-TYPE SYNTAX INTEGER { serialDteModeOther(1), serialDteModeDDSI(2), serialDteModeDDSII(3), serialDteModeTxpINormal(4), serialDteModeTxpITDM(5), serialDteModeTxpIINormal(6), serialDteModeTxpIITDM(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This variable describes mode in which data is being sent from the DDS unit back towards the network. " ::= { serialDteConfigTableEntry 11 } serialDteDSR OBJECT-TYPE SYNTAX INTEGER { serialDteDSROther(1), serialDteDSRTestOff(2), serialDteDSRForcedOn(3), serialDteDSRForcedOff(4), serialDteDSRInternal(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects DSR behavior." ::= { serialDteConfigTableEntry 12 } serialDteDCD OBJECT-TYPE SYNTAX INTEGER { serialDteDCDOther(1), serialDteDCDIdleOff(2), serialDteDCDForcedOn(3), serialDteDCDForcedOff(4), serialDteDCDInternal(5), serialDteDCDFarRTS(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects DCD behavior." ::= { serialDteConfigTableEntry 13 } serialDteRTS OBJECT-TYPE SYNTAX INTEGER { serialDteRTSOther(1), serialDteRTSNormal(2), serialDteRTSForcedOn(3), serialDteRTSExternal(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects RTS behavior." ::= { serialDteConfigTableEntry 14 } serialDteRTSDelay OBJECT-TYPE SYNTAX INTEGER { serialDteRTSDelayOther(1), serialDteRTSDelayNormal(2), serialDteRTSDelayLong(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects RTS to CTS transition delay." ::= { serialDteConfigTableEntry 15 } serialDteDTR OBJECT-TYPE SYNTAX INTEGER { serialDteDTROther(1), serialDteDTRFalse(2), serialDteDTRTrue(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if DTR from the DTE device is false." ::= { serialDteConfigTableEntry 16 } serialDteCTS OBJECT-TYPE SYNTAX INTEGER { serialDteCTSOther(1), serialDteCTSForceTrue(2), serialDteCTSForceFalse(3), serialDteCTSInternal(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the control of the CTS signal at the port." ::= { serialDteConfigTableEntry 17 } serialDteV54 OBJECT-TYPE SYNTAX INTEGER { serialDteV54Other(1), serialDteV54Disable(2), serialDteV54Enable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the unit should respond to inband V.54 loop commands." ::= { serialDteConfigTableEntry 18 } serialDteLL OBJECT-TYPE SYNTAX INTEGER { serialDteLLOther(1), serialDteLLDisable(2), serialDteLLEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the unit should respond to local loop activation by the local loopback signal (EIA530 or RS-232 pin 18)." ::= { serialDteConfigTableEntry 19 } serialDteRL OBJECT-TYPE SYNTAX INTEGER { serialDteRLOther(1), serialDteRLDisable(2), serialDteRLEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the unit should respond to remote loop activation by the remote loopback signal (EIA530 or RS-232 pin 21)." ::= { serialDteConfigTableEntry 20 } serialDteStartChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the starting channel for the interface." ::= { serialDteConfigTableEntry 21 } serialDteNumberOfChannels OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of channels allocated to the interface." ::= { serialDteConfigTableEntry 22 } serialDteTxClock OBJECT-TYPE SYNTAX INTEGER { serialDteTxClockOther(1), serialDteTxClockInternal(2), serialDteTxClockExternal(3), serialDteTxClockOversample(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how the interface derives its transmit clock." ::= { serialDteConfigTableEntry 23 } serialDteBundle OBJECT-TYPE SYNTAX INTEGER { other(1), contiguous(2), alternate(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the allocation pattern of channels assigned to the serial port." ::= { serialDteConfigTableEntry 24 } serialDteChannelRate OBJECT-TYPE SYNTAX INTEGER { other(1), nx56k(2), nx64k(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the rate of all channels assigned to the serial port." ::= { serialDteConfigTableEntry 25 } serialDteInvertClock OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if an inverted clock is used to send data from the serial port." ::= { serialDteConfigTableEntry 26 } serialDteCharSize OBJECT-TYPE SYNTAX INTEGER { other(1), five(2), six(3), seven(4), eight(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the number of bits per character. This variable is valid in ASYNC mode." ::= {serialDteConfigTableEntry 27 } serialDteFlowControl OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), xonXoff(3), rtsCts(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the Flow control to use. This variable is valid only in ASYNC mode." ::= { serialDteConfigTableEntry 28 } serialDtePinStatus OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the Serial port pin status." ::= { serialDteConfigTableEntry 29 } serialDteInInvertClock OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies to use the inverted clock edge for data clocked into the serial port." ::= { serialDteConfigTableEntry 30 } -- Dte Alarm Table serialDteAlarmTable OBJECT-TYPE SYNTAX SEQUENCE OF SerialDteAlarmTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Serial DTE Alarm Table." ::= { serialDte 2 } serialDteAlarmTableEntry OBJECT-TYPE SYNTAX SerialDteAlarmTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the serial DTE Alarm Table." INDEX { serialDteAlarmNearIndex, serialDteAlarmFarIndex, serialDteAlarmIndex } ::= { serialDteAlarmTable 1 } SerialDteAlarmTableEntry ::= SEQUENCE { serialDteAlarmNearIndex INTEGER, serialDteAlarmFarIndex INTEGER, serialDteAlarmIndex INTEGER, serialDteDTRAlarmControl INTEGER, serialDteDTRAlarmStatus INTEGER, serialDteStatusSummary DisplayString, serialDteAlarmSummary DisplayString, serialDteASCStatus INTEGER, serialDteASCCount INTEGER, serialDteASCThreshold INTEGER, serialDteASCAlarm INTEGER, serialDteFDLStatus INTEGER, serialDteFDLCount INTEGER, serialDteFDLThreshold INTEGER, serialDteFDLAlarm INTEGER, serialDteLOSStatus INTEGER, serialDteLOSCount INTEGER, serialDteLOSThreshold INTEGER, serialDteLOSAlarm INTEGER } serialDteAlarmNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { serialDteAlarmTableEntry 1 } serialDteAlarmFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { serialDteAlarmTableEntry 2 } serialDteAlarmIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the serialDteAlarmTable." ::= { serialDteAlarmTableEntry 3 } serialDteDTRAlarmControl OBJECT-TYPE SYNTAX INTEGER { serialDteDTRAlarmOther(1), serialDteDTRAlarmDisable(2), serialDteDTRAlarmEnable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the unit should alarm on loss of DTR." ::= { serialDteAlarmTableEntry 4 } serialDteDTRAlarmStatus OBJECT-TYPE SYNTAX INTEGER { serialDteDTRAlarmOther(1), serialDteDTRAlarmNone(2), serialDteDTRAlarmActive(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates a DTR Loss alarm is active." ::= { serialDteAlarmTableEntry 5 } serialDteStatusSummary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the port status." ::= { serialDteAlarmTableEntry 6 } serialDteAlarmSummary OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides a summary of the port alarms." ::= { serialDteAlarmTableEntry 7 } serialDteASCStatus OBJECT-TYPE SYNTAX INTEGER { serialDteStatusASCOther(1), serialDteStatusNoASC(2), serialDteStatusASC(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if an ASC condition exists on the interface." ::= { serialDteAlarmTableEntry 8 } serialDteASCCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of ASC seconds received by the interface." ::= { serialDteAlarmTableEntry 9 } serialDteASCThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The number of ASC seconds that must be received before an alarm is declared." ::= { serialDteAlarmTableEntry 10 } serialDteASCAlarm OBJECT-TYPE SYNTAX INTEGER { serialDteASCAlarmOther(1), serialDteASCAlarmNone(2), serialDteASCAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the ASC Seconds threshold is exceeded." ::= { serialDteAlarmTableEntry 11 } serialDteFDLStatus OBJECT-TYPE SYNTAX INTEGER { serialDteStatusFDLOther(1), serialDteStatusNoFDL(2), serialDteStatusFDL(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if an FDL error condition exists on the interface." ::= { serialDteAlarmTableEntry 12 } serialDteFDLCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of FDL errored seconds received by the interface." ::= { serialDteAlarmTableEntry 13 } serialDteFDLThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The number of FDL errored seconds that must be received before an alarm is declared." ::= { serialDteAlarmTableEntry 14 } serialDteFDLAlarm OBJECT-TYPE SYNTAX INTEGER { serialDteFDLAlarmOther(1), serialDteFDLAlarmNone(2), serialDteFDLAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the FDL Errored Seconds threshold is exceeded." ::= { serialDteAlarmTableEntry 15 } serialDteLOSStatus OBJECT-TYPE SYNTAX INTEGER { serialDteStatusLOSOther(1), serialDteStatusNoLOS(2), serialDteStatusLOS(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Reports if an LOS condition exists on the interface." ::= { serialDteAlarmTableEntry 16 } serialDteLOSCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This count contains the number of LOS seconds received by the interface." ::= { serialDteAlarmTableEntry 17 } serialDteLOSThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The number of LOS seconds that must be received before an alarm is declared." ::= { serialDteAlarmTableEntry 18 } serialDteLOSAlarm OBJECT-TYPE SYNTAX INTEGER { serialDteLOSAlarmOther(1), serialDteLOSAlarmNone(2), serialDteLOSAlarmThresholdExceeded(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if the LOS Seconds threshold is exceeded." ::= { serialDteAlarmTableEntry 19 } -- analog DTE section analogDteTable OBJECT-TYPE SYNTAX SEQUENCE OF AnalogDteTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Analog DTE Table." ::= { analogDte 1 } analogDteTableEntry OBJECT-TYPE SYNTAX AnalogDteTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the Analog DTE Table." INDEX { analogDteNearIndex, analogDteFarIndex, analogDteIndex } ::= { analogDteTable 1 } AnalogDteTableEntry ::= SEQUENCE { analogDteNearIndex INTEGER, analogDteFarIndex INTEGER, analogDteIndex INTEGER, analogDteDescription DisplayString, analogDteCardType INTEGER, analogDteMode INTEGER, analogDteState INTEGER, analogDteElementID DisplayString, analogDteSignalling INTEGER, analogDteDNISDelay INTEGER, analogDteTxGain INTEGER, analogDteRxGain INTEGER } analogDteNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { analogDteTableEntry 1 } analogDteFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { analogDteTableEntry 2 } analogDteIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index into the analogDteTable." ::= { analogDteTableEntry 3 } analogDteDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..40) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a textual description of the port." ::= { analogDteTableEntry 4 } analogDteCardType OBJECT-TYPE SYNTAX INTEGER { analogDteCardTypeOther(1), analogDteCardTypeFXS(2), analogDteCardTypeFXO(3), analogDteCardType4WEM(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the analog DTE card type." ::= { analogDteTableEntry 5 } analogDteMode OBJECT-TYPE SYNTAX INTEGER { analogDteModeOther(1), analogDteModeSpare(2), analogDteModeActive(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects whether the port is actively assigned to a network channel or not used." ::= { analogDteTableEntry 6 } analogDteState OBJECT-TYPE SYNTAX INTEGER { analogDteStateOther(1), analogDteStateIdle(2), analogDteStateBusy(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the port status as either in the Busy or Idle state." ::= { analogDteTableEntry 7 } analogDteElementID OBJECT-TYPE SYNTAX DisplayString( SIZE(0..20) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This object signifies the name of the device." ::= { analogDteTableEntry 8 } analogDteSignalling OBJECT-TYPE SYNTAX INTEGER { analogDteSignallingOther(1), analogDteSignallingFXSLS(2), analogDteSignallingFXSGS(3), analogDteSignallingUVG(4), analogDteSignallingMEGLS(5), analogDteSignallingMEGGS(6), analogDteSignallingMEGRLS(7), analogDteSignallingMEGRGS(8), analogDteSignallingPLAR(9), analogDteSignallingSLC96(10), analogDteSignallingDIDDNIS(11), analogDteSignallingDNISWLS(12), analogDteSignallingDNISDLS(13), analogDteSignallingDNISWRLS(14), analogDteSignallingDNISDRLS(15), analogDteSignallingDNISWGS(16), analogDteSignallingDNISDGS(17), analogDteSignallingDNISWRGS(18), analogDteSignallingDNISDRGS(19), analogDteSignallingFXOLS(20), analogDteSignallingFXOGS(21), analogDteSignallingFXOUVG(22), analogDteSignallingFXOUVGR(23), analogDteSignalling4WEMTYPE1(24), analogDteSignalling4WEMTYPE2(25), analogDteSignalling4WEMTYPE3(26), analogDteSignalling4WEMTYPE4(27), analogDteSignalling4WEMTYPE5(28), analogDteSignalling4WEMTO(29) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the supervisory operation of the port." ::= { analogDteTableEntry 9 } analogDteDNISDelay OBJECT-TYPE SYNTAX INTEGER { analogDteDNISDelayOther(1), analogDteDNISDelay1Second(2), analogDteDNISDelay2Seconds(3), analogDteDNISDelay3Seconds(4), analogDteDNISDelay4Seconds(5), analogDteDNISDelay5Seconds(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "If the signalling mode has a delay, it can be set from 1 to 5 seconds." ::= { analogDteTableEntry 10 } analogDteTxGain OBJECT-TYPE SYNTAX INTEGER { analogDteTxGainOther(1), analogDteTxGain3DB(2), analogDteTxGain2DB(3), analogDteTxGain1DB(4), analogDteTxGain0DB(5), analogDteTxGainm1DB(6), analogDteTxGainm2DB(7), analogDteTxGainm3DB(8), analogDteTxGainm4DB(9), analogDteTxGainm5DB(10), analogDteTxGainm6DB(11), analogDteTxGainm7DB(12), analogDteTxGainm8DB(13), analogDteTxGainm9DB(14), analogDteTxGainm10DB(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the transmit gain. Values prefixed with m are negative." ::= { analogDteTableEntry 11 } analogDteRxGain OBJECT-TYPE SYNTAX INTEGER { analogDteRxGainOther(1), analogDteRxGain2DB(2), analogDteRxGain1DB(3), analogDteRxGain0DB(4), analogDteRxGainm1DB(5), analogDteRxGainm2DB(6), analogDteRxGainm3DB(7), analogDteRxGainm4DB(8), analogDteRxGainm5DB(9), analogDteRxGainm6DB(10), analogDteRxGainm7DB(11), analogDteRxGainm8DB(12), analogDteRxGainm9DB(13), analogDteRxGainm10DB(14), analogDteRxGainm11DB(15), analogDteRxGainm12DB(16), analogDteRxGainm13DB(17), analogDteRxGainm14DB(18), analogDteRxGainm15DB(19), analogDteRxGainm16DB(20) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the receive gain. Values prefixed with m are negative." ::= { analogDteTableEntry 12 } -- connection table -- allows for configuration/connection of dte ports to network ports connectionTable OBJECT-TYPE SYNTAX SEQUENCE OF ConnectionTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The connection table." ::= { connection 1 } connectionTableEntry OBJECT-TYPE SYNTAX ConnectionTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the connection table." INDEX { connectionNearIndex, connectionFarIndex, connectionTableIndex } ::= { connectionTable 1 } ConnectionTableEntry ::= SEQUENCE { connectionNearIndex INTEGER, connectionFarIndex INTEGER, connectionTableIndex INTEGER, connectionTableDescription DisplayString } connectionNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { connectionTableEntry 1 } connectionFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { connectionTableEntry 2 } connectionTableIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the connection table." ::= { connectionTableEntry 3 } connectionTableDescription OBJECT-TYPE SYNTAX DisplayString(SIZE(0..60)) MAX-ACCESS read-only STATUS current DESCRIPTION "A description of the connection." ::= { connectionTableEntry 4 } connectionChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF ConnectionChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The channel-level connection table." ::= { connection 2 } connectionChannelEntry OBJECT-TYPE SYNTAX ConnectionChannelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the connectionChannelTable." INDEX { connectionChannelNearIndex, connectionChannelFarIndex, connectionChannelLineIndex, connectionChannelIndex } ::= { connectionChannelTable 1 } ConnectionChannelEntry ::= SEQUENCE { connectionChannelNearIndex INTEGER, connectionChannelFarIndex INTEGER, connectionChannelLineIndex INTEGER, connectionChannelIndex INTEGER, channelInterfaceAssignment INTEGER, channelInterfaceDescription DisplayString, channelInterfaceChannel INTEGER, channelSignalling INTEGER } connectionChannelNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { connectionChannelEntry 1 } connectionChannelFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { connectionChannelEntry 2 } connectionChannelLineIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects instance of line." ::= { connectionChannelEntry 3 } connectionChannelIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the connection table." ::= { connectionChannelEntry 4 } channelInterfaceAssignment OBJECT-TYPE SYNTAX INTEGER { other(1), unassigned(2), dTE(3), remComm(4), port1(5), port2(6), port3(7), port4(8), port5(9), port6(10), port7(11), port8(12), port9(13), port10(14), port11(15), port12(16), port13(17), port14(18), port15(19), port16(20), port17(21), port18(22), port19(23), port20(24), port21(25), port22(26), port23(27), port24(28), port25(29), port26(30), port27(31), port28(32), port29(33), port30(34), port31(35), port32(36), slot2PortA(37), slot2PortB(38), slot3PortA(39), slot3PortB(40), slot4PortA(41), slot4PortB(42), slot5PortA(43), slot5PortB(44), slot6PortA(45), slot6PortB(46), slot2Dsu1PortA(47), slot2Dsu1PortB(48), slot2Dsu2PortA(49), slot2Dsu2PortB(50), slot2Dsu3PortA(51), slot2Dsu3PortB(52), slot2Dsu4PortA(53), slot2Dsu4PortB(54), slot2Dsu5PortA(55), slot2Dsu5PortB(56), slot2Dsu6PortA(57), slot2Dsu6PortB(58), slot3Dsu1PortA(59), slot3Dsu1PortB(60), slot3Dsu2PortA(61), slot3Dsu2PortB(62), slot3Dsu3PortA(63), slot3Dsu3PortB(64), slot3Dsu4PortA(65), slot3Dsu4PortB(66), slot3Dsu5PortA(67), slot3Dsu5PortB(68), slot3Dsu6PortA(69), slot3Dsu6PortB(70), slot4Dsu1PortA(71), slot4Dsu1PortB(72), slot4Dsu2PortA(73), slot4Dsu2PortB(74), slot4Dsu3PortA(75), slot4Dsu3PortB(76), slot4Dsu4PortA(77), slot4Dsu4PortB(78), slot4Dsu5PortA(79), slot4Dsu5PortB(80), slot4Dsu6PortA(81), slot4Dsu6PortB(82), slot5Dsu1PortA(83), slot5Dsu1PortB(84), slot5Dsu2PortA(85), slot5Dsu2PortB(86), slot5Dsu3PortA(87), slot5Dsu3PortB(88), slot5Dsu4PortA(89), slot5Dsu4PortB(90), slot5Dsu5PortA(91), slot5Dsu5PortB(92), slot5Dsu6PortA(93), slot5Dsu6PortB(94), slot6Dsu1PortA(95), slot6Dsu1PortB(96), slot6Dsu2PortA(97), slot6Dsu2PortB(98), slot6Dsu3PortA(99), slot6Dsu3PortB(100), slot6Dsu4PortA(101), slot6Dsu4PortB(102), slot6Dsu5PortA(103), slot6Dsu5PortB(104), slot6Dsu6PortA(105), slot6Dsu6PortB(106) } MAX-ACCESS read-write STATUS current DESCRIPTION "The channel assignment." ::= { connectionChannelEntry 5 } channelInterfaceDescription OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a description of the interface channel connection." ::= { connectionChannelEntry 6 } channelInterfaceChannel OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Displays the corresponding channel of the interface channel connection." ::= { connectionChannelEntry 7 } channelSignalling OBJECT-TYPE SYNTAX INTEGER { other(1), clearChannel(2), robbedBit(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows a selection of Clear Channel or Robbed Bit signalling for each DS0." ::= { connectionChannelEntry 8 } -- maintenance section -- controls tests -- -- BERT Table -- bertTable OBJECT-TYPE SYNTAX SEQUENCE OF BertTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BERT control table." ::= { maintenance 1 } bertTableEntry OBJECT-TYPE SYNTAX BertTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the BERT control table." INDEX { bertNearIndex, bertFarIndex, bertIndex } ::= { bertTable 1 } BertTableEntry ::= SEQUENCE { bertNearIndex INTEGER, bertFarIndex INTEGER, bertIndex INTEGER, bertPattern INTEGER, bertLength INTEGER, bertPatternSync INTEGER, bertElapsedTime INTEGER, bertBitErrors INTEGER, bertErroredSeconds INTEGER, bertPercentEFS INTEGER, bertCommand INTEGER } bertNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { bertTableEntry 1 } bertFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { bertTableEntry 2 } bertIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the BERT control table. Selects which BERT chip to use." ::= { bertTableEntry 3 } bertPattern OBJECT-TYPE SYNTAX INTEGER { bertPatternOther(1), bertPatternQRSS(2), bertPattern63(3), bertPattern511(4), bertPattern2047(5), bertPattern215(6), bertPattern220(7), bertPattern223(8), bertPattern1in8(9), bertPattern3in24(10), bertPatternALT(11), bertPatternCLEAR(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Selects the test pattern to be used." ::= { bertTableEntry 4 } bertLength OBJECT-TYPE SYNTAX INTEGER { bertLengthOther(1), bertLength15minutes(2), bertLength30minutes(3), bertLength60minutes(4), bertLength24hours(5), bertLengthContinuous(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies how long the test should run." ::= { bertTableEntry 5 } bertPatternSync OBJECT-TYPE SYNTAX INTEGER { bertPatternSyncOther(1), bertPatternSyncNoTest(2), bertPatternSyncNoSync(3), bertPatternSyncInsync(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the current state of pattern sync during a test." ::= { bertTableEntry 6 } bertElapsedTime OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the amount of time elapsed since a timed test began in seconds." ::= { bertTableEntry 7 } bertBitErrors OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the total number of bit errors detected since the test began." ::= { bertTableEntry 8 } bertErroredSeconds OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Displays the number of asynchronous errored seconds that have been detected since the test began." ::= { bertTableEntry 9 } bertPercentEFS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Displays a ratio derived from the number of error free seconds divided by the number of seconds accumulated in elapsed time." ::= { bertTableEntry 10 } bertCommand OBJECT-TYPE SYNTAX INTEGER { bertCommandOther(1), bertCommandStart(2), bertCommandStop(3), bertCommandResetErrors(4), bertCommandInjectError(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Issues a test command for the interface." ::= { bertTableEntry 11 } bertInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF BertInterfaceTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "BERT control interface table." ::= { maintenance 2 } bertInterfaceTableEntry OBJECT-TYPE SYNTAX BertInterfaceTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the BERT control interface table." INDEX { bertInterfaceNearIndex, bertInterfaceFarIndex, bertChipIndex, bertInterfaceIndex } ::= { bertInterfaceTable 1 } BertInterfaceTableEntry ::= SEQUENCE { bertInterfaceNearIndex INTEGER, bertInterfaceFarIndex INTEGER, bertChipIndex INTEGER, bertInterfaceIndex INTEGER, bertInterfaceSetting INTEGER, bertInterfaceService INTEGER, bertInterfaceChannelRate INTEGER } bertInterfaceNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { bertInterfaceTableEntry 1 } bertInterfaceFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { bertInterfaceTableEntry 2 } bertChipIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects which BERT chip to use." ::= { bertInterfaceTableEntry 3 } bertInterfaceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "An index into the MIB-II interfaces table; the interface for the BERT settings." ::= { bertInterfaceTableEntry 4 } bertInterfaceSetting OBJECT-TYPE SYNTAX INTEGER { bertInterfaceSettingOther(1), bertInterfaceSettingIdle(2), bertInterfaceSettingChannel1(3), bertInterfaceSettingChannel2(4), bertInterfaceSettingChannel3(5), bertInterfaceSettingChannel4(6), bertInterfaceSettingChannel5(7), bertInterfaceSettingChannel6(8), bertInterfaceSettingChannel7(9), bertInterfaceSettingChannel8(10), bertInterfaceSettingChannel9(11), bertInterfaceSettingChannel10(12), bertInterfaceSettingChannel11(13), bertInterfaceSettingChannel12(14), bertInterfaceSettingChannel13(15), bertInterfaceSettingChannel14(16), bertInterfaceSettingChannel15(17), bertInterfaceSettingChannel16(18), bertInterfaceSettingChannel17(19), bertInterfaceSettingChannel18(20), bertInterfaceSettingChannel19(21), bertInterfaceSettingChannel20(22), bertInterfaceSettingChannel21(23), bertInterfaceSettingChannel22(24), bertInterfaceSettingChannel23(25), bertInterfaceSettingChannel24(26), bertInterfaceSettingChannel25(27), bertInterfaceSettingChannel26(28), bertInterfaceSettingChannel27(29), bertInterfaceSettingChannel28(30), bertInterfaceSettingChannel29(31), bertInterfaceSettingChannel30(32), bertInterfaceSettingChannel31(33), bertInterfaceSettingChannel32(34), bertInterfaceSettingNet(35), bertInterfaceSettingDTE(36), bertInterfaceSettingNotEnabled(37), bertInterfaceSettingUseService(38) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies where to send the BERT pattern." ::= { bertInterfaceTableEntry 5 } bertInterfaceService OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the service (see ipadv2.mib) to BERT. The bandwidth associated with the service will get the BERT pattern." ::= { bertInterfaceTableEntry 6 } bertInterfaceChannelRate OBJECT-TYPE SYNTAX INTEGER { other(1), nx56k(2), nx64k(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the network channel rate for all channels involved in a network BERT." ::= { bertInterfaceTableEntry 7 } -- -- Test Table -- testTable OBJECT-TYPE SYNTAX SEQUENCE OF TestTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Test control table." ::= { maintenance 3 } testTableEntry OBJECT-TYPE SYNTAX TestTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the testTable." INDEX { testNearIndex, testFarIndex, testTableIndex } ::= { testTable 1 } TestTableEntry ::= SEQUENCE { testNearIndex INTEGER, testFarIndex INTEGER, testTableIndex INTEGER, testType INTEGER, testLoopDirection INTEGER, testFarLLBFraming INTEGER, testLoopInitiator INTEGER, testDefaultLoopType INTEGER } testNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { testTableEntry 1 } testFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { testTableEntry 2 } testTableIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the testTable, one entry for each interface." ::= { testTableEntry 3 } testType OBJECT-TYPE SYNTAX INTEGER { testTypeOther(1), testTypeNoTest(2), testTypePLB(3), testTypeLLB(4), testtypeMLB(5), testTypeFarPLB(6), testTypeFarLLB(7), testTypeFarMLB(8), testTypePortLoop(9), testTypeV54Loop(10), testTypeFarV54Loop(11), testTypeFarPortLoop(12), testTypeTDM(13), testTypeFarPortUnloop(14), testTypeFarV54Unloop(15), testTypeDualLoop(16), testTypeNetworkSideTransparent(17), testTypeNetworkSideNonTransparent(18), testTypeCustomerSideTransparent(19), testTypeCustomerSideNonTransparent(20) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the test type for the interface." ::= { testTableEntry 4 } testLoopDirection OBJECT-TYPE SYNTAX INTEGER { testLoopOther(1), testLoopUnidirectional(2), testLoopBidirectional(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is the identifier of the current unit loop mode. The values mean: testLoopUnidirectional Line, Data, and V54 loops will be unidirectional Local loop will be bidirectional testLoopBidirectional All loops will be bidirectional" ::= { testTableEntry 5 } testFarLLBFraming OBJECT-TYPE SYNTAX INTEGER { testFarLLBFramingOther(1), testFarLLBFramingUnframed(2), testFarLLBFramingFramed(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This setting, for Far LLB tests on T1 lines, must match the far end unit loop code framing." ::= { testTableEntry 6 } testLoopInitiator OBJECT-TYPE SYNTAX INTEGER { testLoopInitiatorOther(1), testLoopInitiatorLMP(2), testLoopInitiatorSNMP(3), testLoopInitiatorWeb(4), testLoopInitiatorEOC(5), testLoopInitiatorButtons(6), testLoopInitiatorDCEControl(7), testLoopInitiatorISDNPRAV3(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates who started the loop." ::= { testTableEntry 7 } testDefaultLoopType OBJECT-TYPE SYNTAX INTEGER { testDefaultLoopTypeOther(1), testDefaultLoopTypeTransparent(2), testDefaultLoopTypeNonTransparent(3), testDefaultLoopTypeDual(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies the default loop type." ::= { testTableEntry 8 } -- performance section -- performance section performance24Table OBJECT-TYPE SYNTAX SEQUENCE OF Performance24TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance table, contains TR54016 standard and enhanced data." ::= { performance 1 } performance24TableEntry OBJECT-TYPE SYNTAX Performance24TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the performance24Table." INDEX { performance24NearIndex, performance24FarIndex, performance24InterfaceIndex, performance24Index } ::= { performance24Table 1 } Performance24TableEntry ::= SEQUENCE { performance24NearIndex INTEGER, performance24FarIndex INTEGER, performance24InterfaceIndex INTEGER, performance24Index INTEGER, performance24ES INTEGER, performance24BES INTEGER, performance24SES INTEGER, performance24UAS INTEGER, performance24LOFC INTEGER, performance24CSS INTEGER, performance24CRCES INTEGER, performance24OOFS INTEGER, performance24LOSS INTEGER, performance24AISS INTEGER, performance24RAS INTEGER, performance24BPVS INTEGER, performance24timestamp TimeTicks } performance24NearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { performance24TableEntry 1 } performance24FarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { performance24TableEntry 2 } performance24InterfaceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the interface." ::= { performance24TableEntry 3 } performance24Index OBJECT-TYPE SYNTAX INTEGER { performance24Summary(1), performance24Current(2), performance24period1(3), performance24period2(4), performance24period3(5), performance24period4(6), performance24period5(7), performance24period6(8), performance24period7(9), performance24period8(10), performance24period9(11), performance24period10(12), performance24period11(13), performance24period12(14), performance24period13(15), performance24period14(16), performance24period15(17), performance24period16(18), performance24period17(19), performance24period18(20), performance24period19(21), performance24period20(22), performance24period21(23), performance24period22(24), performance24period23(25), performance24period24(26), performance24period25(27), performance24period26(28), performance24period27(29), performance24period28(30), performance24period29(31), performance24period30(32), performance24period31(33), performance24period32(34), performance24period33(35), performance24period34(36), performance24period35(37), performance24period36(38), performance24period37(39), performance24period38(40), performance24period39(41), performance24period40(42), performance24period41(43), performance24period42(44), performance24period43(45), performance24period44(46), performance24period45(47), performance24period46(48), performance24period47(49), performance24period48(50), performance24period49(51), performance24period50(52), performance24period51(53), performance24period52(54), performance24period53(55), performance24period54(56), performance24period55(57), performance24period56(58), performance24period57(59), performance24period58(60), performance24period59(61), performance24period60(62), performance24period61(63), performance24period62(64), performance24period63(65), performance24period64(66), performance24period65(67), performance24period66(68), performance24period67(69), performance24period68(70), performance24period69(71), performance24period70(72), performance24period71(73), performance24period72(74), performance24period73(75), performance24period74(76), performance24period75(77), performance24period76(78), performance24period77(79), performance24period78(80), performance24period79(81), performance24period80(82), performance24period81(83), performance24period82(84), performance24period83(85), performance24period84(86), performance24period85(87), performance24period86(88), performance24period87(89), performance24period88(90), performance24period89(91), performance24period90(92), performance24period91(93), performance24period92(94), performance24period93(95), performance24period94(96), performance24period95(97), performance24period96(98) } MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the 24-hour performance table." ::= { performance24TableEntry 4 } performance24ES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds for the 15-minute period." ::= { performance24TableEntry 5 } performance24BES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds for the 15-minute period." ::= { performance24TableEntry 6 } performance24SES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds for the 15-minute period." ::= { performance24TableEntry 7 } performance24UAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds for the 15-minute period." ::= { performance24TableEntry 8 } performance24LOFC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Frame Counts for the 15-minute period." ::= { performance24TableEntry 9 } performance24CSS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds for the 15-minute period." ::= { performance24TableEntry 10 } performance24CRCES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CRC Errored Seconds for the 15-minute period." ::= { performance24TableEntry 11 } performance24OOFS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Seconds for the 15-minute period." ::= { performance24TableEntry 12 } performance24LOSS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Signal Seconds for the 15-minute period." ::= { performance24TableEntry 13 } performance24AISS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Alarm Indication Signal Seconds for the 15-minute period." ::= { performance24TableEntry 14 } performance24RAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Remote Alarm (Yellow) Seconds for the 15-minute period." ::= { performance24TableEntry 15 } performance24BPVS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bipolar Violation Seconds for the 15-minute period." ::= { performance24TableEntry 16 } performance24timestamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the statistics were last updated." ::= { performance24TableEntry 17 } performance30Table OBJECT-TYPE SYNTAX SEQUENCE OF Performance30TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Performance table, contains TR54016 standard and enhanced 30-day data." ::= { performance 2 } performance30TableEntry OBJECT-TYPE SYNTAX Performance30TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the performance30Table." INDEX { performance30NearIndex, performance30FarIndex, performance30InterfaceIndex, performance30Index } ::= { performance30Table 1 } Performance30TableEntry ::= SEQUENCE { performance30NearIndex INTEGER, performance30FarIndex INTEGER, performance30InterfaceIndex INTEGER, performance30Index INTEGER, performance30ES INTEGER, performance30BES INTEGER, performance30SES INTEGER, performance30UAS INTEGER, performance30LOFC INTEGER, performance30CSS INTEGER, performance30CRCES INTEGER, performance30OOFS INTEGER, performance30LOSS INTEGER, performance30AISS INTEGER, performance30RAS INTEGER, performance30BPVS INTEGER, performance30timestamp TimeTicks } performance30NearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { performance30TableEntry 1 } performance30FarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { performance30TableEntry 2 } performance30InterfaceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the interface." ::= { performance30TableEntry 3 } performance30Index OBJECT-TYPE SYNTAX INTEGER { performance30Summary(1), performance30day1(2), performance30day2(3), performance30day3(4), performance30day4(5), performance30day5(6), performance30day6(7), performance30day7(8), performance30day8(9), performance30day9(10), performance30day10(11), performance30day11(12), performance30day12(13), performance30day13(14), performance30day14(15), performance30day15(16), performance30day16(17), performance30day17(18), performance30day18(19), performance30day19(20), performance30day20(21), performance30day21(22), performance30day22(23), performance30day23(24), performance30day24(25), performance30day25(26), performance30day26(27), performance30day27(28), performance30day28(29), performance30day29(30), performance30day30(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the 30-day performance table." ::= { performance30TableEntry 4 } performance30ES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Errored Seconds for the 1-day period." ::= { performance30TableEntry 5 } performance30BES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bursty Errored Seconds for the 1-day period." ::= { performance30TableEntry 6 } performance30SES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Severely Errored Seconds for the 1-day period." ::= { performance30TableEntry 7 } performance30UAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Unavailable Seconds for the 1-day period." ::= { performance30TableEntry 8 } performance30LOFC OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Frame Counts for the 1-day period." ::= { performance30TableEntry 9 } performance30CSS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Controlled Slip Seconds for the 1-day period." ::= { performance30TableEntry 10 } performance30CRCES OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of CRC Errored Seconds for the 1-day period." ::= { performance30TableEntry 11 } performance30OOFS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Out of Frame Seconds for the 1-day period." ::= { performance30TableEntry 12 } performance30LOSS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Loss of Signal Seconds for the 1-day period." ::= { performance30TableEntry 13 } performance30AISS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Alarm Indication Signal Seconds for the 1-day period." ::= { performance30TableEntry 14 } performance30RAS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Remote Alarm (Yellow) Seconds for the 1-day period." ::= { performance30TableEntry 15 } performance30BPVS OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Bipolar Violation Seconds for the 1-day period." ::= { performance30TableEntry 16 } performance30timestamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the statistics were last updated." ::= { performance30TableEntry 17 } -- itable -- requests a list of all interfaces on a device iTable OBJECT-TYPE SYNTAX SEQUENCE OF ITableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface table." ::= { itable 1 } iTableEntry OBJECT-TYPE SYNTAX ITableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the interface table." INDEX { iTableNearIndex, iTableFarIndex, iTableIndex } ::= { iTable 1 } ITableEntry ::= SEQUENCE { iTableNearIndex INTEGER, iTableFarIndex INTEGER, iTableIndex INTEGER, iDescription DisplayString, iType INTEGER, iSlot INTEGER, iPort INTEGER, iStatus INTEGER } iTableNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { iTableEntry 1 } iTableFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { iTableEntry 2 } iTableIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the interface table, used for addressing in above tables." ::= { iTableEntry 3 } iDescription OBJECT-TYPE SYNTAX DisplayString( SIZE(0..80) ) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of the interface." ::= { iTableEntry 4 } iType OBJECT-TYPE SYNTAX INTEGER { disabled(0), v35(1), eia530(2), rs232(3), voice(4), hsdata(5), dualt1dte(6), dualddsv1(7), hexdds(8), ocudp(9), x21(10), dualddsv2(11), rfdl(128), alt(129), t1dte(130), didte(131), t1ntw(132), e1ntw(133), ddsntw(134), ddsdte(135), ddsdbu(136), fxs(137), fxo(138), eandm(139), e1sig(192) } MAX-ACCESS read-only STATUS current DESCRIPTION "Enumerated interface type." ::= { iTableEntry 5 } iSlot OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Device-dependent slot in which the interface resides." ::= { iTableEntry 6 } iPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Device-dependent port in which the interface resides." ::= { iTableEntry 7 } iStatus OBJECT-TYPE SYNTAX INTEGER { iStatusOther(1), iStatusOK(2), iStatusErrored(3), iStatusAlarmed(4), iStatusTesting(5), iStatusUnassigned(6), iStatusLoopDetected(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the interface." ::= { iTableEntry 8 } -- traplog -- a table of the most recent snmp traps -- note that the near and far indices are simply elements in the table, -- not indices as in the above tables... traplogTable OBJECT-TYPE SYNTAX SEQUENCE OF TraplogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The traplog table." ::= { traplog 1 } traplogEntry OBJECT-TYPE SYNTAX TraplogEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the traplog table." INDEX { traplogIndex } ::= { traplogTable 1 } TraplogEntry ::= SEQUENCE { traplogIndex INTEGER, traplogNearIndex INTEGER, traplogFarIndex INTEGER, traplogInterfaceIndex INTEGER, traplogTrapNum INTEGER, traplogTimeStamp DisplayString, traplogDeviceType INTEGER, traplogOID1 DisplayString, traplogDescription1 DisplayString, traplogValue1 DisplayString, traplogOID2 DisplayString, traplogDescription2 DisplayString, traplogValue2 DisplayString, traplogOID3 DisplayString, traplogDescription3 DisplayString, traplogValue3 DisplayString } traplogIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the traplog table." ::= { traplogEntry 1 } traplogNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the near device." ::= { traplogEntry 2 } traplogFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the far device." ::= { traplogEntry 3 } traplogInterfaceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the interface." ::= { traplogEntry 4 } traplogTrapNum OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The SNMP trap id." ::= { traplogEntry 5 } traplogTimeStamp OBJECT-TYPE SYNTAX DisplayString(SIZE(0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "Time the SNMP was generated." ::= { traplogEntry 6 } traplogDeviceType OBJECT-TYPE SYNTAX INTEGER { other(1), none(2), t12000(3), e12048(4), e13021(5), t13000(6), t13001(7), t13002(8), t13030(9), t13060(10), t13101(11), t13102(12), t13111(13), t13112(14), dds4001(15), dds4101(16), dds4051(17), dds4151(18), dds41TDM(19), generic54016(20), wanSuite(21) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the device type for the trap." ::= { traplogEntry 7 } traplogOID1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNMP Object ID of 1st varbind." ::= { traplogEntry 8 } traplogDescription1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of 1st varbind." ::= { traplogEntry 9 } traplogValue1 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of of 1st varbind." ::= { traplogEntry 10 } traplogOID2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNMP Object ID of 2nd varbind." ::= { traplogEntry 11 } traplogDescription2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of 2nd varbind." ::= { traplogEntry 12 } traplogValue2 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of of 2nd varbind." ::= { traplogEntry 13 } traplogOID3 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "SNMP Object ID of 3rd varbind." ::= { traplogEntry 14 } traplogDescription3 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Description of 3rd varbind." ::= { traplogEntry 15 } traplogValue3 OBJECT-TYPE SYNTAX DisplayString(SIZE(0..80)) MAX-ACCESS read-only STATUS current DESCRIPTION "Value of of 3rd varbind." ::= { traplogEntry 16 } -- end traplogTableEntry traplogDeleteEntry OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Writing the index of a trap to this object will delete the trap entry. Writing an index value of 0 will delete all entries." ::= { traplog 2 } traplogSortOption OBJECT-TYPE SYNTAX INTEGER { other(1), ascendingtimestamp(2), ascendingunit(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Determines the order in which traps are presented." ::= { traplog 3 } traplogLastTimeStamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The timestamp of the newest trap in the trap log." ::= { traplog 4 } -- unitUtilities -- a table of unit utilities options unitUtilitiesTable OBJECT-TYPE SYNTAX SEQUENCE OF UnitUtilitiesTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unit utilities table." ::= { unitUtilities 1 } unitUtilitiesTableEntry OBJECT-TYPE SYNTAX UnitUtilitiesTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the unit utilities table." INDEX { unitUtilitiesNearIndex, unitUtilitiesFarIndex } ::= { unitUtilitiesTable 1 } UnitUtilitiesTableEntry ::= SEQUENCE { unitUtilitiesNearIndex INTEGER, unitUtilitiesFarIndex INTEGER, unitUtilitiesLocalPassword DisplayString, unitUtilitiesTime DisplayString, unitUtilitiesDate DisplayString, unitUtilitiesMaintenanceReset INTEGER, unitUtilitiesAlarmResetTimer INTEGER, unitUtilitiesAlarmClear INTEGER, unitUtilitiesSaveConfig INTEGER, unitUtilitiesRestartStatus INTEGER, unitUtilitiesReadOnlyPassword DisplayString, unitUtilitiesPasswordLockoutEnable INTEGER, unitUtilitiesPasswordLockoutStatus INTEGER, unitUtilitiesPasswordLockoutClear INTEGER } unitUtilitiesNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { unitUtilitiesTableEntry 1 } unitUtilitiesFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { unitUtilitiesTableEntry 2 } unitUtilitiesLocalPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The password for local access to a device (VT100, front panel)." ::= { unitUtilitiesTableEntry 3 } unitUtilitiesTime OBJECT-TYPE SYNTAX DisplayString( SIZE(0..8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the current time as known to the device. The current time may be entered in this field using the HHMMSS format. For example, 3:45AM is entered as 034500 and 3:45PM is entered as 154500." ::= { unitUtilitiesTableEntry 4 } unitUtilitiesDate OBJECT-TYPE SYNTAX DisplayString( SIZE(0..8) ) MAX-ACCESS read-write STATUS current DESCRIPTION "This string is the current date as known to the device. The current date may be entered in this field using the MMDDYY format. For example, July 4, 1997 is entered as 070497." ::= { unitUtilitiesTableEntry 5 } unitUtilitiesMaintenanceReset OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2), restart(3), resetProfile1(4), resetProfile2(5), resetProfile3(6), resetProfile4(7), resetProfile5(8), resetProfile6(9), resetProfile7(10), resetProfile8(11), resetProfile9(12), resetProfile10(13), resetProfile11(14), resetProfile12(15), resetProfile13(16), resetProfile14(17), resetProfile15(18), resetProfile16(19), resetProfile17(20), resetProfile18(21), resetProfile19(22), resetProfile20(23), resetProfile21(24) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field allows resetting the device to default values by reloading the start-up default configuration parameters." ::= { unitUtilitiesTableEntry 6 } unitUtilitiesAlarmResetTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This field allows setting a timer which will cause all existing alarms on the device to be cleared upon expiration. The counter is in seconds." ::= { unitUtilitiesTableEntry 7 } unitUtilitiesAlarmClear OBJECT-TYPE SYNTAX INTEGER { utilitiesAlarmClearOther(1), utilitiesAlarmClearNow(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Writing a value of utilitiesAlarmClearNow(2) to this field causes all existing alarms to be cleared immediately." ::= { unitUtilitiesTableEntry 8 } unitUtilitiesSaveConfig OBJECT-TYPE SYNTAX INTEGER { other(1), saveConfig(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This field commands the unit to save its configuration." ::= { unitUtilitiesTableEntry 9 } unitUtilitiesRestartStatus OBJECT-TYPE SYNTAX INTEGER { other(1), notNeeded(2), recommended(3), required(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates if the unit configuration needs to be saved and restarted. notNeeded - A save and restart is not needed at this time. recommended - A save and restart is recommended for optimal performance but not required. required - A save and restart is required for the unit to implement the altered configuration." ::= { unitUtilitiesTableEntry 10 } unitUtilitiesReadOnlyPassword OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The password for read only access to a device (VT100, front panel)." ::= { unitUtilitiesTableEntry 11 } unitUtilitiesPasswordLockoutEnable OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to enable or disable the password lockout feature." ::= { unitUtilitiesTableEntry 12 } unitUtilitiesPasswordLockoutStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3), locked(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter indicates if the password lockout feature is enabled or disabled, and if it is enabled this parameter may reflect if the password is indeed locked." ::= { unitUtilitiesTableEntry 13 } unitUtilitiesPasswordLockoutClear OBJECT-TYPE SYNTAX INTEGER { other(1), unlock(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used to unlock a locked password." ::= { unitUtilitiesTableEntry 14 } -- ---------------------------------------------------------------------- -- netAPS section -- ---------------------------------------------------------------------- netAPSConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF NetAPSConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "One to One network Automatic Protection Switching (APS) configuration parameters table." ::= { netAPS 1 } netAPSConfigTableEntry OBJECT-TYPE SYNTAX NetAPSConfigTableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the netAPSConfigTable." INDEX { netAPSConfigNearIndex, netAPSConfigFarIndex, netAPSConfigifIndex } ::= { netAPSConfigTable 1 } NetAPSConfigTableEntry ::= SEQUENCE { netAPSConfigNearIndex INTEGER, netAPSConfigFarIndex INTEGER, netAPSConfigifIndex INTEGER, netAPSConfigOtherifIndex INTEGER, netAPSConfigMode INTEGER, netAPSConfigRevert INTEGER, netAPSConfigManualInhibit INTEGER, netAPSConfigAvailabilityTimer INTEGER, netAPSConfigESThreshold INTEGER, netAPSConfigESCount INTEGER, netAPSConfigESSwitchEvent INTEGER, netAPSConfigCSESThreshold INTEGER, netAPSConfigCSESCount INTEGER, netAPSConfigCSESSwitchEvent INTEGER, netAPSConfigStatusBitmap INTEGER, netAPSConfigStatusString DisplayString, netAPSConfigTimeInInterval INTEGER, netAPSConfigValidIntervals INTEGER, netAPSConfigValidDays INTEGER, netAPSConfigReset INTEGER } netAPSConfigNearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { netAPSConfigTableEntry 1 } netAPSConfigFarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { netAPSConfigTableEntry 2 } netAPSConfigifIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the MIB-II ifIndex." ::= { netAPSConfigTableEntry 3 } netAPSConfigOtherifIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "MIB-II ifIndex of the other interface involved with the APS." ::= { netAPSConfigTableEntry 4 } netAPSConfigMode OBJECT-TYPE SYNTAX INTEGER { other(1), tr54017(2), autoABswitch(3), masterAltCarrier(4), slaveAltCarrier(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "tr54017 - Implements TR54017 autoABswitch - Implements a single ended A/B switch between two independent lines masterAltCarrier - Master side of alternate carrier APS slaveAltCarrier - Slave side of alternate carrier APS" ::= { netAPSConfigTableEntry 5 } netAPSConfigRevert OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "disabled - Service does not return to the primary line until the backup line fails. enabled - Service automatically returns to the primary line when the primary line is able to carry service again." ::= { netAPSConfigTableEntry 6 } netAPSConfigManualInhibit OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), thisLine(3), otherLine(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Disabled - Neither line is manually inhibited from carrying service. ThisLine - This line is manually inhibited from carrying service. OtherLine - The other line is manually inhibited from carrying service." ::= { netAPSConfigTableEntry 7 } netAPSConfigAvailabilityTimer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The line availability timer represents the minimum amount of time that is free of errors in active events that must expire before this line is returned to service availability. The timer is in seconds ranging from 0 - 900 seconds." ::= { netAPSConfigTableEntry 8 } netAPSConfigESThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is the number of erred seconds in a 15-minute period needed before a transfer request is triggered. A setting of zero disables this trigger." ::= { netAPSConfigTableEntry 9 } netAPSConfigESCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the number of erred seconds in the current 15-minute interval. This count is reset at the beginning of a new 15-minute interval." ::= { netAPSConfigTableEntry 10 } netAPSConfigESSwitchEvent OBJECT-TYPE SYNTAX INTEGER { other(1), normal(2), triggered(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if exceeding the ES threshold caused a transfer to the other line." ::= { netAPSConfigTableEntry 11 } netAPSConfigCSESThreshold OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is the number of consecutive SES needed before a transfer request is triggered. A setting of zero disables this trigger." ::= { netAPSConfigTableEntry 12 } netAPSConfigCSESCount OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the number of consecutive SES detected. This count stops when 900 is reached and is reset when a non-SES is detected." ::= { netAPSConfigTableEntry 13 } netAPSConfigCSESSwitchEvent OBJECT-TYPE SYNTAX INTEGER { other(1), normal(2), triggered(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This status indicates if exceeding the consecutive SES threshold caused a transfer to the other line." ::= { netAPSConfigTableEntry 14 } netAPSConfigStatusBitmap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "TR54017 defined bitmap status for this line interface: Value is 1 if this line is carrying service. Value is 2 if this line is in a failed state. Value is 4 if this line is in an inhibit state. Value is 8 if this line is looped back. Value is 16 if the other line is in a failed state. Value is 32 if the other line is in an inhibit state. Value is 64 if the other line is looped back. Value is 128 if the manual inhibit is active Note that multiple status conditions may exist at the same time. The failed state is determined when carrier fails, or the ES threshold is reached, or the consecutive SES threshold is reached. The inhibit state is set when the manual inhibit setting affects this line or the line is inhibited by the remote end." ::= { netAPSConfigTableEntry 15 } netAPSConfigStatusString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..80) ) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string version of netAPSConfigStatusBitmap for this line status bits" ::= { netAPSConfigTableEntry 16 } netAPSConfigTimeInInterval OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds into the netAPSHist24Table current interval." ::= { netAPSConfigTableEntry 17 } netAPSConfigValidIntervals OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid intervals in the netAPSHist24Table" ::= { netAPSConfigTableEntry 18 } netAPSConfigValidDays OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid days in the netAPSHist30Table" ::= { netAPSConfigTableEntry 19 } netAPSConfigReset OBJECT-TYPE SYNTAX INTEGER { other(1), clearAlarms(2), clearHistory(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This action parameter does the following when the given value is set: other - Does nothing clearAlarms - Clear the APS events and counts clearHistory - Clear the APS history table statistics" ::= { netAPSConfigTableEntry 20 } -- ---------------------------------------------------------------------- netAPSHist24Table OBJECT-TYPE SYNTAX SEQUENCE OF NetAPSHist24TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "History table, contains Network APS historical data." ::= { netAPS 2 } netAPSHist24TableEntry OBJECT-TYPE SYNTAX NetAPSHist24TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the netAPSHist24Table." INDEX { netAPSHist24NearIndex, netAPSHist24FarIndex, netAPSHist24ifIndex, netAPSHist24Index } ::= { netAPSHist24Table 1 } NetAPSHist24TableEntry ::= SEQUENCE { netAPSHist24NearIndex INTEGER, netAPSHist24FarIndex INTEGER, netAPSHist24ifIndex INTEGER, netAPSHist24Index INTEGER, netAPSHist24Timestamp TimeTicks, netAPSHist24StatusBitmap INTEGER, netAPSHist24StatusString DisplayString, netAPSHist24Occurrences INTEGER, netAPSHist24Duration INTEGER } netAPSHist24NearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { netAPSHist24TableEntry 1 } netAPSHist24FarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { netAPSHist24TableEntry 2 } netAPSHist24ifIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the MIB-II ifIndex." ::= { netAPSHist24TableEntry 3 } netAPSHist24Index OBJECT-TYPE SYNTAX INTEGER { statSummary(1), statCurrent(2), statPeriod1(3), statPeriod2(4), statPeriod3(5), statPeriod4(6), statPeriod5(7), statPeriod6(8), statPeriod7(9), statPeriod8(10), statPeriod9(11), statPeriod10(12), statPeriod11(13), statPeriod12(14), statPeriod13(15), statPeriod14(16), statPeriod15(17), statPeriod16(18), statPeriod17(19), statPeriod18(20), statPeriod19(21), statPeriod20(22), statPeriod21(23), statPeriod22(24), statPeriod23(25), statPeriod24(26), statPeriod25(27), statPeriod26(28), statPeriod27(29), statPeriod28(30), statPeriod29(31), statPeriod30(32), statPeriod31(33), statPeriod32(34), statPeriod33(35), statPeriod34(36), statPeriod35(37), statPeriod36(38), statPeriod37(39), statPeriod38(40), statPeriod39(41), statPeriod40(42), statPeriod41(43), statPeriod42(44), statPeriod43(45), statPeriod44(46), statPeriod45(47), statPeriod46(48), statPeriod47(49), statPeriod48(50), statPeriod49(51), statPeriod50(52), statPeriod51(53), statPeriod52(54), statPeriod53(55), statPeriod54(56), statPeriod55(57), statPeriod56(58), statPeriod57(59), statPeriod58(60), statPeriod59(61), statPeriod60(62), statPeriod61(63), statPeriod62(64), statPeriod63(65), statPeriod64(66), statPeriod65(67), statPeriod66(68), statPeriod67(69), statPeriod68(70), statPeriod69(71), statPeriod70(72), statPeriod71(73), statPeriod72(74), statPeriod73(75), statPeriod74(76), statPeriod75(77), statPeriod76(78), statPeriod77(79), statPeriod78(80), statPeriod79(81), statPeriod80(82), statPeriod81(83), statPeriod82(84), statPeriod83(85), statPeriod84(86), statPeriod85(87), statPeriod86(88), statPeriod87(89), statPeriod88(90), statPeriod89(91), statPeriod90(92), statPeriod91(93), statPeriod92(94), statPeriod93(95), statPeriod94(96), statPeriod95(97), statPeriod96(98) } MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the 24-hour history table." ::= { netAPSHist24TableEntry 4 } netAPSHist24Timestamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the statistics were last updated." ::= { netAPSHist24TableEntry 5 } netAPSHist24StatusBitmap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "TR54017 defined bitmap status for this line interface: Value is 1 if this line is carrying service. Value is 2 if this line is in a failed state. Value is 4 if this line is in an inhibit state. Value is 8 if this line is looped back. Value is 16 if the other line is in a failed state. Value is 32 if the other line is in an inhibit state. Value is 64 if the other line is looped back. Value is 128 if the manual inhibit is active Note that multiple status conditions may exist at the same time. The failed state is determined when carrier fails, or the ES threshold is reached, or the consecutive SES threshold is reached. The inhibit state is set when the manual inhibit setting affects this line or the line is inhibited by the remote end." ::= { netAPSHist24TableEntry 6 } netAPSHist24StatusString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..80) ) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string version of netAPSHist24StatusBitmap for this line status bits" ::= { netAPSHist24TableEntry 7 } netAPSHist24Occurrences OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the total number of times the service was transferred between lines." ::= { netAPSHist24TableEntry 8 } netAPSHist24Duration OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the number of seconds the service was provided on this line." ::= { netAPSHist24TableEntry 9 } -- ---------------------------------------------------------------------- netAPSHist30Table OBJECT-TYPE SYNTAX SEQUENCE OF NetAPSHist30TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "History table, contains Network APS 30-day historical data." ::= { netAPS 3 } netAPSHist30TableEntry OBJECT-TYPE SYNTAX NetAPSHist30TableEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the netAPSHist30Table." INDEX { netAPSHist30NearIndex, netAPSHist30FarIndex, netAPSHist30ifIndex, netAPSHist30Index } ::= { netAPSHist30Table 1 } NetAPSHist30TableEntry ::= SEQUENCE { netAPSHist30NearIndex INTEGER, netAPSHist30FarIndex INTEGER, netAPSHist30ifIndex INTEGER, netAPSHist30Index INTEGER, netAPSHist30Timestamp TimeTicks, netAPSHist30StatusBitmap INTEGER, netAPSHist30StatusString DisplayString, netAPSHist30Occurrences INTEGER, netAPSHist30Duration INTEGER } netAPSHist30NearIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the near device." ::= { netAPSHist30TableEntry 1 } netAPSHist30FarIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the far device." ::= { netAPSHist30TableEntry 2 } netAPSHist30ifIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Selects the MIB-II ifIndex." ::= { netAPSHist30TableEntry 3 } netAPSHist30Index OBJECT-TYPE SYNTAX INTEGER { statSummary(1), statDay1(2), statDay2(3), statDay3(4), statDay4(5), statDay5(6), statDay6(7), statDay7(8), statDay8(9), statDay9(10), statDay10(11), statDay11(12), statDay12(13), statDay13(14), statDay14(15), statDay15(16), statDay16(17), statDay17(18), statDay18(19), statDay19(20), statDay20(21), statDay21(22), statDay22(23), statDay23(24), statDay24(25), statDay25(26), statDay26(27), statDay27(28), statDay28(29), statDay29(30), statDay30(31) } MAX-ACCESS read-only STATUS current DESCRIPTION "The index into the 30-day history table." ::= { netAPSHist30TableEntry 4 } netAPSHist30Timestamp OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the statistics were last updated." ::= { netAPSHist30TableEntry 5 } netAPSHist30StatusBitmap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "TR54017 defined bitmap status for this line interface: Value is 1 if this line is carrying service. Value is 2 if this line is in a failed state. Value is 4 if this line is in an inhibit state. Value is 8 if this line is looped back. Value is 16 if the other line is in a failed state. Value is 32 if the other line is in an inhibit state. Value is 64 if the other line is looped back. Value is 128 if the manual inhibit is active Note that multiple status conditions may exist at the same time. The failed state is determined when carrier fails, or the ES threshold is reached, or the consecutive SES threshold is reached. The inhibit state is set when the manual inhibit setting affects this line or the line is inhibited by the remote end." ::= { netAPSHist30TableEntry 6 } netAPSHist30StatusString OBJECT-TYPE SYNTAX DisplayString( SIZE(0..80) ) MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII string version of netAPSHist30StatusBitmap for this line status bits" ::= { netAPSHist30TableEntry 7 } netAPSHist30Occurrences OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the total number of times the service was transferred between lines." ::= { netAPSHist30TableEntry 8 } netAPSHist30Duration OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This parameter is the number of seconds the service was provided on this line." ::= { netAPSHist30TableEntry 9 } END