DLINKMGMT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress, TimeTicks FROM RFC1155-SMI MODULE-IDENTITY,OBJECT-TYPE FROM SNMPv2-SMI dlink FROM ID-REC-MIB DisplayString, PhysAddress FROM RFC1213-MIB; dlinkMgmtMIB MODULE-IDENTITY LAST-UPDATED "200007150000Z" ORGANIZATION "D-Link, Inc." CONTACT-INFO " D-Link Customer Service Postal: No. 20,Park Ave, II, Science-based Industrial Park, Hsinchu, taiwan, R.O.C. Tel: 886-3-577-9966 E-mail: " DESCRIPTION "The Structure of Common Management Information for the D-Link enterprise." ::= { dlink 11 } agentConfigInfo OBJECT IDENTIFIER ::= { dlinkMgmtMIB 1 } -- **************** -- agentBasicInfo * -- **************** agentBasicInfo OBJECT IDENTIFIER ::= { agentConfigInfo 1 } agentRuntimeSwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a textual description of the runtime software version and revision. If the version number is one and revision number is zero agentRuntimeSwVersion would be 'Ver. 1.0'" ::= { agentBasicInfo 1 } agentPromFwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a textual description of the agent PROM firmware version and revision. If the version number is one and revision number is zero agentPromFwVersion would be 'Ver. 1.0'" ::= { agentBasicInfo 2 } agentHwRevision OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "This is a textual description of the hardware version and revision. If the version number is one and revision number is zero agentHwRevision would be 'Ver. 1.0'" ::= { agentBasicInfo 3 } agentMgmtProtocolCapability OBJECT-TYPE SYNTAX INTEGER { other(1), snmp-ip(2), snmp-ipx(3), snmp-ip-ipx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The network management protocol(s) supported by this agent." ::= { agentBasicInfo 4 } -- ************************* -- agentMibcapabilityTable * -- ************************* agentMibCapabilityTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentMibCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of MIB capability entries supported by this agent." ::= { agentBasicInfo 5 } agentMibCapabilityEntry OBJECT-TYPE SYNTAX AgentMibCapabilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MIB capability entry contains objects describing a particular MIB supported by this agent." INDEX { agentMibCapabilityIndex } ::= { agentMibCapabilityTable 1 } AgentMibCapabilityEntry ::= SEQUENCE { agentMibCapabilityIndex INTEGER, agentMibCapabilityDescr DisplayString, agentMibCapabilityVersion INTEGER, agentMibCapabilityType INTEGER } agentMibCapabilityIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A list of agentMibCapabilityDescr entries." ::= { agentMibCapabilityEntry 1 } agentMibCapabilityDescr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the MIB supported by the agent." ::= { agentMibCapabilityEntry 2 } agentMibCapabilityVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The version of the MIB specified in this entry." ::= { agentMibCapabilityEntry 3 } agentMibCapabilityType OBJECT-TYPE SYNTAX INTEGER { other(1), standard(2), proprietary(3), experiment(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of the MIB specified in this entry." ::= { agentMibCapabilityEntry 4 } agentMgmtRole OBJECT-TYPE SYNTAX INTEGER { other(1), primary-master(2), backup-master(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The role of this agent within this particular switch structure ." ::= { agentBasicInfo 6 } -- ****************** -- agentBasicConfig * -- ****************** agentBasicConfig OBJECT IDENTIFIER ::= { agentConfigInfo 2 } agentFirmwareFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of the firmware file to be downloaded." ::= { agentBasicConfig 1 } agentFirmwareSourceAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The ip address where new firmware file is located on." ::= { agentBasicConfig 2 } agentFirmwareUpdateCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), activate(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "while this object is set to 'activate', FTP download is working immediately, and agentFirmwareUpdateState is changed to 'in-process'. The agent always returns 'other' while it is read." ::= { agentBasicConfig 3 } agentFirmwareUpdateState OBJECT-TYPE SYNTAX INTEGER { other(1) , in-process(2), invalid-file(3), violation(4), file-not-found(5), disk-full(6), complete(7), time-out(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "status of firmware download control. If the value is 'other', means never firmware updated since device started up." ::= { agentBasicConfig 4 } agentFirmwareLastUpdateTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "record the sysUptime for last active agentFirmwareUpdateCtrl. Default is set to 0." ::= { agentBasicConfig 5 } agentSystemReset OBJECT-TYPE SYNTAX INTEGER { other(1), warm-start(2), no-reset(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the agent system reset state. Setting this object to no-reset(3) has no effect. Setting this object to warm-start(2) will reset the agent. The agent always returns no-reset(3) when this object is read." ::= { agentBasicConfig 6 } agentRs232PortConfig OBJECT-TYPE SYNTAX INTEGER { other(1), console(2), out-of-band(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the RS-232C mode while device restart." ::= { agentBasicConfig 7 } agentOutOfBandBaudRateConfig OBJECT-TYPE SYNTAX INTEGER { other(1), baudRate-2400 (2), baudRate-9600 (3), baudRate-19200(4), baudRate-38400(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the out_of_band baud rate while device restart." ::= { agentBasicConfig 8 } -- *********************** -- agentIpProtocolConfig * -- *********************** agentIpProtoConfig OBJECT IDENTIFIER ::= { agentConfigInfo 3 } agentIpNumOfIf OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of IP interfaces supported by this agent." ::= { agentIpProtoConfig 1 } agentIpIfTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of IP interface entries supported by the agent." ::= { agentIpProtoConfig 2 } agentIpIfEntry OBJECT-TYPE SYNTAX AgentIpIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An agentIPIfEntry contains information about a particular IP interface." INDEX { agentIpIfIndex } ::= { agentIpIfTable 1 } AgentIpIfEntry ::= SEQUENCE { agentIpIfIndex INTEGER, agentIpIfAddress IpAddress, agentIpIfNetMask IpAddress, agentIpIfDefaultRouter IpAddress, agentIpIfMacAddr PhysAddress, agentIpIfType INTEGER } agentIpIfIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the IP interface number in the agentIpIfTable. This value should never greater than agentIpNumOfIf ." ::= { agentIpIfEntry 1 } agentIpIfAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the interface ." ::= { agentIpIfEntry 2 } agentIpIfNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP net mask for this interface ." ::= { agentIpIfEntry 3 } agentIpIfDefaultRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The default gateway for this IP interface." ::= { agentIpIfEntry 4 } agentIpIfMacAddr OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of this IP interface. For interfaces which do not have such an address. (e.g., a serial line), this object should contain an octet string of zero length." ::= { agentIpIfEntry 5 } agentIpIfType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ethernet-csmacd(6), slip(28) -- generic SLIP } MAX-ACCESS read-only STATUS current DESCRIPTION "The physical layer interface of the IP interface." ::= { agentIpIfEntry 6 } agentIpBootServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Address of Boot Server." ::= { agentIpProtoConfig 3 } agentIpGetIpFromBootpServer OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), bootp(3), dhcp(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up." ::= { agentIpProtoConfig 4 } agentIpUnauthAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of an unauthorized SNMP packet." ::= { agentIpProtoConfig 5 } agentIpUnauthComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The community string of an unauthorized SNMP packet." ::= { agentIpProtoConfig 6 } -- ************************ -- agentIptrapMangerTable * -- ************************ agentIpTrapManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentIpTrapManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of trap manager entries to which to send SNMP traps ." ::= { agentIpProtoConfig 9 } agentIpTrapManagerEntry OBJECT-TYPE SYNTAX AgentIpTrapManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the particular trap manager settings." INDEX { agentIpTrapManagerIpAddr } ::= { agentIpTrapManagerTable 1 } AgentIpTrapManagerEntry ::= SEQUENCE { agentIpTrapManagerIpAddr IpAddress, agentIpTrapManagerComm DisplayString, agentIpTrapManagerStatus INTEGER } agentIpTrapManagerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address to receive SNMP traps from this device." ::= { agentIpTrapManagerEntry 1 } agentIpTrapManagerComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-create STATUS current DESCRIPTION "The community string of the SNMP trap packet sent to the trap manager." ::= { agentIpTrapManagerEntry 2 } agentIpTrapManagerStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates whether or not the trap should be send to this trap manager." ::= { agentIpTrapManagerEntry 3 } agenMaxManagerIp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries in the management ip security table (agentManagerIpSecurityTable)." ::= { agentIpProtoConfig 10 } agenCurrtManagerIp OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Current applied number of entries in the management ip security table ." ::= { agentIpProtoConfig 11 } -- ***************************** -- agentManagerIpSecurityTable * -- ***************************** agentManagerIpSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentManagerIpSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about security management ip . When the table is empty , the device permit any ip to manage the device . If the table is'nt empty , it will only permit the same destination address to manage the device ." ::= { agentIpProtoConfig 12 } agentManagerIpSecurityEntry OBJECT-TYPE SYNTAX AgentManagerIpSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing a security ip address for a particular security request ." INDEX { agentManagerIpSecurityAddr } ::= { agentManagerIpSecurityTable 1 } AgentManagerIpSecurityEntry ::= SEQUENCE { agentManagerIpSecurityAddr IpAddress, agentManagerIpSecurityStatus INTEGER } agentManagerIpSecurityAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address for the security request ." ::= { agentManagerIpSecurityEntry 1 } agentManagerIpSecurityStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the security ip address status . To writing disabled value to the object, and then the corresponding entry will be removed from the table." ::= { agentManagerIpSecurityEntry 2 } END