DLINK-3100-DEVICEPARAMS-MIB DEFINITIONS ::= BEGIN -- Title: DLINK-3100 ROS -- Private DEVICE PARAMETERS MIB -- Version: 7.46 -- Date: 15-Jan-2007 IMPORTS rnd FROM DLINK-3100-MIB OBJECT-TYPE, MODULE-IDENTITY, IpAddress FROM SNMPv2-SMI TruthValue, DisplayString, PhysAddress FROM SNMPv2-TC; rndDeviceParams MODULE-IDENTITY LAST-UPDATED "200701020000Z" ORGANIZATION "Dlink, Inc. Dlink Semiconductor, Inc." CONTACT-INFO "www.dlink.com" DESCRIPTION "This private MIB module defines general Parameters private MIBs." REVISION "200701020000Z" DESCRIPTION "Initial revision." ::= { rnd 2 } -- rndDeviceParams group contains a number of general variables rndBridgeType OBJECT-TYPE SYNTAX INTEGER { reb(1), ceb(2), ceblb(3), xeb(4), xeb1(5), rebsx(6), rtb(7), ltb(8), tre(9), rtre(10), -- remote TRE xtb(11), ete(12), rete(13), -- remote ETE ielb(30), leb(31), openGate12(32), openGate4(33), ran(34), itlb(35), gatelinx(36), openGate2(37), ogRanTR(38), rdapter(39), ogVan(40), wanGate(41), ogRubE(42), ogRubT(43), wanGateI(44), vGate4(45), lre(46), mrt(47), vGate2(48) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of the RND bridge type." ::= { rndDeviceParams 1 } rndInactiveArpTimeOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This variable defines the maximum time period that can pass between ARP requests concerning an entry in the ARP table. After this time period, the entry is deleted from the table." ::= { rndDeviceParams 2 } -- The following two variables define the format of RND specific -- error messages issued by the RND devices rndBridgeAlarm OBJECT IDENTIFIER ::= { rndDeviceParams 3 } rndErrorDesc OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "A textual description of the enterprise-specific trap sent to the Network Management Station by the RND managed device." ::= { rndBridgeAlarm 1 } rndErrorSeverity OBJECT-TYPE SYNTAX INTEGER { info(0), warning(1), error(2), fatal-error(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The severity type of the enterprise-specific trap sent to the Network Management Station by the RND managed device." ::= { rndBridgeAlarm 2 } rndBrgVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge version." ::= { rndDeviceParams 4 } rndBrgFeatures OBJECT-TYPE SYNTAX OCTET STRING -- SIZE 20 MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask that defines the features supported by a particular configuration of this network element: __________________________________________ | Byte 1|Byte 2 |Byte 3 | ....|Byte 20 | |87654321| | 87654321| |________|_______________________________| Byte1 : bit1: TX Block mask bit2: Source Routing Encapulation bit3: SNA/SDLC bit4: Frame Relay bit5: SNMP bit6: LAN Manager bit7: High Performance bit8: Translation Byte2 : bit1: DEC Router bit2: IPX Router bit3: IP Router Byte3 : bit1: Dial Up Backup bit2: COD bit3: FACS bit4: Load Balance bit5: Remote Configuration bit6: RIP 2 bit7: OSPF bit8: IPX RIP/SAP Filter Byte4 : bit1: BootP Server bit2: BootP Client bit3: Compression bit4: V25.bis bit5: ISDN bit6: CODv2 bit7: NSPF bit8: UDP Relay Byte5 bit1:VirtualLAN bit2:Static IP Multicast bit3:IP Redundancy bit4:CCM2 bit5:ISDN Bonding bit6:Backup Link Selection -- for the VAN/Rdapter ver 4.0 bit7:IP/IPX Forwarding -- for the WANgate ver 4.0 bit8:Improved COD Byte6 bit1: Server Disptacher bit2: ISDN_US -- for the VANSX/WANGATE ver 5.0 bit3: PPP bit4: IP Rip Filter -- for Vgate3 bit5: Zero Hop Routing -- for Vgate3 bit6: ISDN Japan bit7: PPP-Security Byte7 bit1: With unmanaged Switch bit2: 2 LANs bit3: OSPF Ver 2.0 bit4: FACS Ver 2.0 bit5: Multiple WEB Farm bit6: Backup Server bit7: Check Connectivity bit8: WSD multiplexing Byte8 bit1: MRT3 bit2: WSD Redundancy bit3: DHCP Server bit4: WSD Connection Limit bit5: WSD Distributed System bit6: WSD Load Report bit7: WSD super farm bit8: RadWiz leased line Byte9 bit1: PPP IP address negotiaton bit2: DNS bit3: Nat bit4: WSD Static proximity bit5: WSD Dynamic proximity bit6: WSD Proxy bit7: WSD Proximity client bit8: MAC Load balancing Byte10 bit1: Unnum Inf bit2: Power Supply redundancy bit3: MRT PPP Compression bit4: ZHR Apolo bit5: Copy port bit6: UDP Relay 2.0 bit7: NVRAM bit8: URL table Byte11 bit1: URL super farm bit2: NAT on LAN bit3: Remote Con bit4: AP5000 bit5: Session tracking bit6: Mirroring bit7: Alias IP bit8: CSD Nat Byte12 bit1: content check bit2: mlb virtual ip bit3: reserved DLINK-3100 bit4: csd nat exception bit5: statistics monitor bit6: reserved-for-radware " ::= { rndDeviceParams 5 } rndBrgLicense OBJECT-TYPE SYNTAX OCTET STRING -- SIZE 20 MAX-ACCESS read-write STATUS current DESCRIPTION "This parameter is used for entering a s/w license number for a device. A separate license number is supplied for each device." ::= { rndDeviceParams 6 } -- IP Host Parameters --All the new parameters under this section will be added to the -- rndMng group, as rndIpHost sub-group. -- rndIpHost OBJECT IDENTIFIER ::= { rndDeviceParams 7 } -- --ICMP Transmission Enable\Disable --The new variable will be -- Obsolete -- rndICMPTransmitionEnable OBJECT-TYPE -- SYNTAX INTEGER { -- enable(1), -- disable(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This variable controlls the ability to transmit ICMP frames" -- ::= { rndIpHost 1 } rndCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF RndCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The community table of the agent" ::= { rndIpHost 2 } rndCommunityEntry OBJECT-TYPE SYNTAX RndCommunityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The row definition for this table." INDEX { rndCommunityMngStationAddr, IMPLIED rndCommunityString } ::= { rndCommunityTable 1 } RndCommunityEntry ::= SEQUENCE { rndCommunityMngStationAddr IpAddress, rndCommunityString DisplayString, rndCommunityAccess INTEGER, rndCommunityTrapsEnable INTEGER, rndCommunityStatus INTEGER, rndCommunityPortSecurity INTEGER, rndCommunityOwner DisplayString, rndCommunityTrapDestPort INTEGER } rndCommunityMngStationAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The management station that will be allowed to communicate with the agent IP address" ::= { rndCommunityEntry 1 } rndCommunityString OBJECT-TYPE SYNTAX DisplayString (SIZE(1..20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The community string with which the management station will communicate with the agent" ::= { rndCommunityEntry 2 } rndCommunityAccess OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2), super(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The allowed access to this management station" ::= { rndCommunityEntry 3} rndCommunityTrapsEnable OBJECT-TYPE SYNTAX INTEGER { snmpV1(1), snmpV2(2), snmpV3(3), trapsDisable(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "Should the agent send traps to the management station, and what version is required" ::= { rndCommunityEntry 4 } rndCommunityStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), invalid(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry. If the status is invalid the community entry will be deleted" ::= { rndCommunityEntry 5 } rndCommunityPortSecurity OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If enabled the device will only receive SNMP messages from the port, through which this NMS is reachable from the device." DEFVAL { disabled } ::= { rndCommunityEntry 6 } rndCommunityOwner OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The owner of this community" ::= { rndCommunityEntry 7 } rndCommunityTrapDestPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The transport protocol (usually UDP) port to which traps to the management station represebted by this entry will be sent. The default is the well-known IANA assigned port number for SNMP traps. This object is relevant only if rndCommunityTrapsEnable has a value different from trapsDisable." DEFVAL { 162 } ::= { rndCommunityEntry 8 } rlMridTable OBJECT-TYPE SYNTAX SEQUENCE OF RlMridEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The MRID related configurations table of the agent" ::= { rndIpHost 3 } rlMridEntry OBJECT-TYPE SYNTAX RlMridEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The row definition for this table." INDEX { rndCommunityMngStationAddr, IMPLIED rndCommunityString } ::= { rlMridTable 1 } RlMridEntry ::= SEQUENCE { rlMridConnection INTEGER, rlManagedMrid INTEGER } rlMridConnection OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The router instance connecting the NMS who accessed the agent through the community table entry corresponding to the keys of this entry." ::= { rlMridEntry 1 } rlManagedMrid OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The router instance currently managed by the NMS who accessed the agent through the community table entry corresponding to the keys of this entry " ::= { rlMridEntry 2 } rndManagedTime OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The time will be sent in the format hhmmss" ::= { rndDeviceParams 8 } rndManagedDate OBJECT-TYPE SYNTAX DisplayString (SIZE(6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The date will be sent in the format ddmmyy" ::= { rndDeviceParams 9 } rndBaseBootVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the boot version of the product." ::= { rndDeviceParams 10 } rndIpHostManagement OBJECT IDENTIFIER ::= { rndIpHost 4 } rndIpHostManagementSupported OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "ifindex manage supported." ::= { rndIpHostManagement 1 } rndIpHostManagementIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "if supported manage , indicate ifindex, if 0 thaen disable" ::= { rndIpHostManagement 2 } genGroup OBJECT IDENTIFIER ::= { rndDeviceParams 11 } genGroupHWVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the HW version of the product." ::= { genGroup 1 } genGroupConfigurationSymbol OBJECT-TYPE SYNTAX DisplayString (SIZE(1)) MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the Configuration Symbol attached to any hardware module manufactured by LANNET. One single character A..Z defines the CS version." ::= { genGroup 2 } genGroupHWStatus OBJECT-TYPE SYNTAX INTEGER { ok(1), hardwareProblems(2), notSupported(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "This attribute describes the status of the group hardware as detected by the sensors software." ::= { genGroup 3 } rndBasePhysicalAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Base physical (MAC) address of the device." ::= { rndDeviceParams 12 } RlImageIdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "SW images enumeration" SYNTAX INTEGER { image1(1), image2(2) } rndSoftwareFile OBJECT IDENTIFIER ::= { rndDeviceParams 13 } rndActiveSoftwareFileTable OBJECT-TYPE SYNTAX SEQUENCE OF RndActiveSoftwareFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The (conceptual) table listing the active software file of the requested unit." ::= {rndSoftwareFile 1 } rndActiveSoftwareFileEntry OBJECT-TYPE SYNTAX RndActiveSoftwareFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry (conceptual row) in the rndActiveSoftwareFileTable." INDEX {rndUnitNumber } ::= {rndActiveSoftwareFileTable 1 } RndActiveSoftwareFileEntry ::= SEQUENCE { rndUnitNumber INTEGER, rndActiveSoftwareFile RlImageIdType, rndActiveSoftwareFileAfterReset INTEGER } rndUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number (for stackable devices) or 1 for 'stand alone' device." ::= {rndActiveSoftwareFileEntry 1 } rndActiveSoftwareFile OBJECT-TYPE SYNTAX RlImageIdType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the current active software file, image1 or image2." ::= {rndActiveSoftwareFileEntry 2 } rndActiveSoftwareFileAfterReset OBJECT-TYPE SYNTAX INTEGER { image1(1), image2(2), invalidImage(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the software file that will be active after reset (image1 or image2). If an error occurred in the download process, resulting in the corruption of the single software file, The value 'invalidImage' will be returned. This value can not be set by the user." ::= {rndActiveSoftwareFileEntry 3 } rlResetStatus OBJECT-TYPE SYNTAX BITS { ok(0), no-stack-integrity(1), downgrade(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "A bit mask that specifies system status before reset action is preformed. Reset is prohibited in stackable products if the images selected after reboot are not of the same release version in ALL stack units. Downgrade status specifies that there are some actions to be preformed on the CDB file before reset is preformed. 0x0 - OK 0x1 - noStackIntegrity 0x2 - downgrade" ::= { rndSoftwareFile 2 } rndImageSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Max number of sectors currently allocated for image(s)." ::= { rndDeviceParams 14 } rndBackupConfigurationEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies whether the device supports backup-config parameters in lcli commands." ::= { rndDeviceParams 15 } rndImageInfo OBJECT IDENTIFIER ::= { rndDeviceParams 16 } rndImageInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF RndImageInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The table contains information about images." ::= {rndImageInfo 1 } rndImageInfoEntry OBJECT-TYPE SYNTAX RndImageInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " An entry in the rndImageInfoTable." INDEX {rndStackUnitNumber } ::= {rndImageInfoTable 1 } RndImageInfoEntry ::= SEQUENCE { rndStackUnitNumber INTEGER, rndImage1Name DisplayString, rndImage2Name DisplayString, rndImage1Version DisplayString, rndImage2Version DisplayString, rndImage1Date DisplayString, rndImage2Date DisplayString, rndImage1Time DisplayString, rndImage2Time DisplayString } rndStackUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The unit number (for stackable devices) or 1 for 'stand alone' device." ::= {rndImageInfoEntry 1 } rndImage1Name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the file name of image-1 in the system." ::= {rndImageInfoEntry 2 } rndImage2Name OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the file name of image-2 (if present) in the system.If image-2 is not present show 'no info' text" ::= {rndImageInfoEntry 3 } rndImage1Version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version of image-1 in the system." ::= {rndImageInfoEntry 4 } rndImage2Version OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version of image-2 (if present) in the system.If image-2 is not present show 'no info' text" ::= {rndImageInfoEntry 5 } rndImage1Date OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the compilation date of image-1 in the system." ::= {rndImageInfoEntry 6 } rndImage2Date OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the compilation date of image-2 (if present) in the system.If image-2 is not present show 'no info' text" ::= {rndImageInfoEntry 7 } rndImage1Time OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the compilation time of image-1 in the system." ::= {rndImageInfoEntry 8 } rndImage2Time OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the compilation time of image-2 (if present) in the system.If image-2 is not present show 'no info' text" ::= {rndImageInfoEntry 9 } rlComponentsInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF RlComponentsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains information about components, their streams and baselines in the device images." ::= {rndImageInfo 2} rlComponentsInfoEntry OBJECT-TYPE SYNTAX RlComponentsInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the rlComponentsInfoTable." INDEX {rlComponentsInfoStackUnitNumber, rlComponentsInfoImageId, IMPLIED rlComponentsInfoComponent} ::= {rlComponentsInfoTable 1 } RlComponentsInfoEntry ::= SEQUENCE { rlComponentsInfoStackUnitNumber INTEGER, rlComponentsInfoImageId RlImageIdType, rlComponentsInfoComponent DisplayString, rlComponentsInfoBaseline DisplayString } rlComponentsInfoStackUnitNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unit number (for stackable devices) or 1 for 'stand alone' device." ::= {rlComponentsInfoEntry 1} rlComponentsInfoImageId OBJECT-TYPE SYNTAX RlImageIdType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the image id in the unit" ::= {rlComponentsInfoEntry 2} rlComponentsInfoComponent OBJECT-TYPE SYNTAX DisplayString(SIZE (1..40)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates the SW component name." ::= {rlComponentsInfoEntry 3} rlComponentsInfoBaseline OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the version control baseline of the SW component name." ::= {rlComponentsInfoEntry 5} END