-- ----------------------------------------------------------------------------- -- DGS3712-L2MGMT-MIB -- ----------------------------------------------------------------------------- -- Version 2.27 -- 2009/09/21 -- Request By Strive Zhao for project DGS3700R2 -- [New Object] -- Add swL2PortCtrlMDIXState in swL2PortCtrlTable to support config midx -- [Modification] -- Add "ddm" SYNTAX value for swL2PortErrPortReason and swL2PortInfoErrorDisabled -- ----------------------------------------------------------------------------- -- Version 2.26 -- 2009/7/30 -- Request By Elite Liu for project DGS32XXR1.3 -- Add swL2DhcpLocalRelayState -- Add swL2DhcpLocalRelayVLANTable -- ----------------------------------------------------------------------------- -- Version 2.25 -- 2009/04/13 -- Request By Magic Xiang for project DGS3700 -- [Modification] -- remove swL2DevCtrlIGMPSnoopingMcstRTOnly -- ----------------------------------------------------------------------------- -- Version 2.24 -- 2008/12/1 -- Requset By Rick Ou for project DGS3700 -- [New Object] -- move swL2SubnetVLANTable to SubnetVLAN.mib -- move swL2VlanPrecedenceTable to SubnetVLAN.mib -- add swL2NniGvrpBpduAddress -- ------------------------------------------------------------------------------ -- Version 2.09 -- 2008/11/04 -- Request By Magic Xiang for project DGS3700 -- [New Object] -- 1. move swL2LimitedMulticastMgmt to McastFilter.mib -- 2. move swL2IGMPMgmt to McastSnooping.mib -- ----------------------------------------------------------------------------- -- Version 2.08 -- 2008/06/02 -- Request By Kelvin Tao for project DGS3700 -- [New Object] -- 1. add swL2DevCtrlCFM -- 2. move swL2QOSMgmt to QoS.mib and move swL2PortSecurityMgmt to PortSecurity.mib -- 3. move swL2IGMPSnoopingMulticastVlanState swL2IGMPMulticastVlanTable -- and swL2IGMPMulticastVlanGroupTable to ISMVLAN.mib -- ----------------------------------------------------------------------------- -- Version 2.07 -- 2008/03/21 -- Request By Kelvin Tao for project DGS3700 -- [New Object] -- add swIGMPSnoopingGroupTable,swL2SubnetVLANTable and swL2VlanPrecedenceTable -- ----------------------------------------------------------------------------- -- Version 2.06 -- 2008/03/10 -- Request By Kelvin Tao for project DGS3700 -- [New Object] -- add swL2LimitedMulticastFilterVIDTable and swL2MulticastFilterVIDMaxGroupTable -- ----------------------------------------------------------------------------- -- Version 2.05 -- 2007/06/05 -- Request By Jenny Zeng for project DES3400 -- [New Object] -- (a)add swL2IGMPMulticastVlanTagMemberPort, swL2IGMPMulticastVlanState and -- swL2IGMPMulticastVlanReplaceSourceIp in table swL2IGMPMulticastVlanTable -- (b)add swL2IGMPMulticastVlanGroupTable -- (c)add swL2MulticastFilterMode, swL2MulticastFilterModeVlanTable and swL2MulticastFilterModePortTable -- (d)add swL2MulticastFilterProfileTable, swL2MulticastFilterProfileAddressTable,swL2LimitedMulticastFilterPortTable and -- swL2MulticastFilterPortMaxGroupTable -- -- [Modification] -- (a)remove swL2LimitedMulticastTable and swL2LimitedMulticastResetPort -- -- Version 2.04 -- 2007/05/22 -- Request By Jenny Zeng for project DES3400 -- (a)add swL2DevCtrlWeb, swL2DevCtrlWebState, swL2DevCtrlWebTcpPort -- (b)add swL2TrunkLACPPortTable -- (c)add swL2DevCtrlSnmpTrapState -- (d)add swL2PortCounterCtrlTable -- (e)add swL2PortErrTable -- (f)add swL2PortSecurityEntryClearCtrl in table swL2PortSecurityControlTable -- (g)add swL2DevCtrlIGMPSnoopingMcstRTOnly -- -- ----------------------------------------------------------------------------- -- Version 2.03 -- 2006/10/26 -- add swL2VLANMgmt for new feature request(Leander Chang): -- advertisement control of VALN -- ----------------------------------------------------------------------------- -- Version 2.02 -- 2006/10/16 (reported from Yan Zhang/CD/CN/Alphanetworks) -- add object swL2StpForwardBPDU, swL2StpLbd, swL2StpLbdRecoverTime. -- add table swL2StpPortTable, swL2CosPriorityTable, swL2CosPortPRITable, swL2CosMacBasePRITable -- for implement trap/log in mac notify and stp loop. -- ----------------------------------------------------------------------------- -- Version 2.01 -- 2006/7/7 -- added object swL2LimitedMulticastResetPort -- ----------------------------------------------------------------------------- -- Version 2.00 -- 2006/6/30 -- rearrange the MIB that base on PX and DES3526. -- ----------------------------------------------------------------------------- -- Version 1.3 -- 2005/12/27 -- added object swL2PortCtrlJumboFrameMaxSize -- ----------------------------------------------------------------------------- -- Version 1.2 -- 2005/11/11 11:36 -- for implement trap/log in port security violation. -- add object swL2PortSecurityTrapLogState, swL2PortSecurityViolationMac ,swL2PortSecurityViolationTrap -- ----------------------------------------------------------------------------- -- Version 1.1 -- 2005/9/12 10:04 -- add swL2PortInfoMediumType in swL2PortInfoTable and -- add swL2PortCtrlMediumType in swL2PortCtrlTable -- add swL2PortCtrlJumboFrame -- ----------------------------------------------------------------------------- -- Version 1.02 -- 2005/4/8 04:31PM -- By Scott Slong -- Add swL2DevCtrlManagementVlanId -- ----------------------------------------------------------------------------- -- Version 1.01 -- 2004/9/21 04:31PM -- By Karen Huang -- Add swL2PortCableDiagnosisTable -- ----------------------------------------------------------------------------- -- Version 1.00 -- Remove swDevInfoSystemUptime, swDevInfoConsoleInuse,swL2DevCtrlUpDownloadState,swDevInfoSaveCfg -- Remove swL2DevCtrlUpDownloadImageFileName ,swL2DevCtrlUpDownloadImageSourceAddr -- Remove swL2DevCtrlUpDownloadImage , swL2DevCtrlSaveCfg -- ----------------------------------------------------------------------------- -- Version 0.02 -- 2002/07/30 -- By Tommy Wang -- Renamed to DXxxxxx-MIB -- Add swL2TrafficMgmt -- Modified swL2DevCtrl -- Removed swL2PortStTable -- Removed swL2PortCtrlEntry->swL2PortCtrlBackPressState and -- swL2PortCtrlBMStromthreshold -- Modified swL2MirrorMgmt -- Removed swL2FilterAddrVid -- Modified swL2IGMPCtrlTable -- Removed swL2PriorityMgmt -- Modified swL2TrunkMasterPortIndex MAX-ACCESS read-only to read-write -- Add swL2IGMPCtrState for invalid(4) -- Modified swL2PortInfoType -- Removed swDevInfoFrontPanelLedStatus about RPS and modified its SIZE -- -- ----------------------------------------------------------------------------- -- Version 0.01 -- 2000/07/03 -- By Chrissy Chen -- Removed swL2PortTxPrioQueueCtrlTable -- Modified swL2PortCtrlBMStromPercentage to swL2PortCtrlBMStromthreshold -- -- ----------------------------------------------------------------------------- DGS-3700-12-L2MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress , TimeTicks , Integer32, Unsigned32, MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI DisplayString,RowStatus,TruthValue FROM SNMPv2-TC --PortList FROM Q-BRIDGE-MIB AgentNotifyLevel FROM DLINK-ID-REC-MIB dgs3712 FROM SW3700PRIMGMT-MIB; swL2MgmtMIB MODULE-IDENTITY LAST-UPDATED "0803100000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "The Structure of Layer 2 Network Management Information." ::= { dgs3712 2 } MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order, copy from RFC1493 VlanId ::= INTEGER (1..4094) PortList ::= OCTET STRING(SIZE (0..127)) Ipv6Address ::= TEXTUAL-CONVENTION DISPLAY-HINT "2x:" STATUS current DESCRIPTION "This data type is used to model IPv6 addresses. This is a binary string of 16 octets in network byte-order." SYNTAX OCTET STRING (SIZE (16)) swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } -- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } -- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } -- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } -- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } -- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } -- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 } swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } -- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 } -- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 } swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 } swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 } swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 } -- ----------------------------------------------------------------------------- -- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } -- ----------------------------------------------------------------------------- swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 } swDevInfoTotalNumOfPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports within this switch. This value is the sum of the ports within this switch." ::= { swL2DevInfo 1 } swDevInfoNumOfPortInUse OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in this switch connected to the segment or the end stations." ::= { swL2DevInfo 2 } swDevInfoFrontPanelLedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a set of system LED indications. The first four octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED. The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED. System LED: 01 = fail/error/non existence. 02 = work normal Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0." ::= { swL2DevInfo 4 } -- ----------------------------------------------------------------------------- swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 } swL2DevCtrlStpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable the spanning tree algorithm during the runtime of the system." ::= { swL2DevCtrl 1 } swL2DevCtrlIGMPSnooping OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled." ::= { swL2DevCtrl 2 } -- swL2DevCtrlIGMPSnoopingMcstRTOnly OBJECT-TYPE -- SYNTAX INTEGER { -- enabled(1), -- disabled(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object controls IGMP snooping forward multicast routing only state." -- ::= { swL2DevCtrl 3 } swL2DevCtrlSnmpTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the SNMP trap status." ::= { swL2DevCtrl 5 } swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the object is set to active, all statistical counters will be cleared. If set to normal, no action." ::= { swL2DevCtrl 6 } swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT_VLAN_ID of the system." ::= { swL2DevCtrl 7 } swL2MACNotifyState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable MAC Notification." ::= { swL2DevCtrl 8 } swL2MACNotifyHistorySize OBJECT-TYPE SYNTAX INTEGER (1..500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1 ." ::= { swL2DevCtrl 9 } swL2MACNotifyInterval OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the time interval, in seconds, which will trigger MAC notification messages." ::= { swL2DevCtrl 10 } -- ----------------------------------------------------------------------------- swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 } swL2DevCtrlTelnetState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Telnet status." ::= { swL2DevCtrlTelnet 1 } swL2DevCtrlTelnetTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object designates TCP ports. When Telnet is disabled, this object is not accessible." ::= { swL2DevCtrlTelnet 2 } -- ----------------------------------------------------------------------------- swL2DevCtrlManagementVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls which previously created VLANs are included in the System IP Interface." ::= { swL2DevCtrl 16 } -- ----------------------------------------------------------------------------- swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 17 } swL2DevCtrlWebState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Web status." ::= { swL2DevCtrlWeb 1 } swL2DevCtrlWebTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object designates TCP ports. When Web is disabled, this object is not accessible." ::= { swL2DevCtrlWeb 2 } swL2DevCtrlLLDPState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For the receiving of LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. " ::= { swL2DevCtrl 18 } swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When lldp is disabled and lldp forward_message is enabled, the received LLDP Data Unit packets will be forwarded. " DEFVAL {disabled} ::={swL2DevCtrl 19} swL2DevCtrlIpAutoconfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the IP auto configuration state." ::= { swL2DevCtrl 20 } -- ----------------------------------------------------------------------------- swL2DevCtrlCFM OBJECT IDENTIFIER ::= { swL2DevCtrl 21 } swL2DevCtrlCFMState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM global state." ::={swL2DevCtrlCFM 1} swL2DevCtrlCFMPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DevCtrlCFMPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing CFM state of speicified ports." ::= { swL2DevCtrlCFM 2 } swL2DevCtrlCFMPortEntry OBJECT-TYPE SYNTAX SwL2DevCtrlCFMPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of CFM state on speicified ports." INDEX { swL2DevCtrlCFMPortIndex } ::= { swL2DevCtrlCFMPortTable 1 } SwL2DevCtrlCFMPortEntry ::= SEQUENCE { swL2DevCtrlCFMPortIndex INTEGER, swL2DevCtrlCFMPortState INTEGER } swL2DevCtrlCFMPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the port-num." ::= { swL2DevCtrlCFMPortEntry 1 } swL2DevCtrlCFMPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM state on per-port." ::= { swL2DevCtrlCFMPortEntry 2 } -- ----------------------------------------------------------------------------- swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 } swL2DevAlarmNewRoot OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap." ::= { swL2DevAlarm 1 } swL2DevAlarmTopologyChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or other." ::= { swL2DevAlarm 2 } swL2DevAlarmLinkChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device does not send the trap if this object value is disabled or other." ::= { swL2DevAlarm 3 } -- ----------------------------------------------------------------------------- -- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } -- ----------------------------------------------------------------------------- swL2VlanStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { swL2VLANMgmt 1 } swL2VlanStaticEntry OBJECT-TYPE SYNTAX SwL2VlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a VLAN configured into the device by (local or network) management." INDEX { swL2VlanIndex } ::= { swL2VlanStaticTable 1 } SwL2VlanStaticEntry ::= SEQUENCE { swL2VlanIndex VlanId, swL2VLANAdvertisement INTEGER } swL2VlanIndex OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN-ID or other identifier referring to this VLAN." ::= { swL2VlanStaticEntry 1 } swL2VLANAdvertisement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the advertisement is active or not." ::= { swL2VlanStaticEntry 2 } swL2PVIDAutoAssignmentState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'." ::= { swL2VLANMgmt 2 } swL2VlanPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing vlan and port role information of each port." ::= { swL2VLANMgmt 3 } swL2VlanPortInfoEntry OBJECT-TYPE SYNTAX SwL2VlanPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry of vlan port information." INDEX { swL2VlanPortInfoPortIndex,swL2VlanPortInfoVid } ::= { swL2VlanPortInfoTable 1 } SwL2VlanPortInfoEntry ::= SEQUENCE { swL2VlanPortInfoPortIndex INTEGER, swL2VlanPortInfoVid INTEGER, swL2VlanPortInfoPortRole INTEGER } swL2VlanPortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { swL2VlanPortInfoEntry 1 } swL2VlanPortInfoVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN-ID assigned to a special port" ::= { swL2VlanPortInfoEntry 2 } swL2VlanPortInfoPortRole OBJECT-TYPE SYNTAX INTEGER { none(1), untagged(2), tagged(3), dynamic(4), forbidden(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port role of a special port.when none,it means this port is not belong to the vlan." ::= { swL2VlanPortInfoEntry 3 } swL2NniGvrpBpduAddress OBJECT-TYPE SYNTAX INTEGER { dot1d(1), dot1ad(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the GVRP's BPDU MAC address of NNI port In Q-in_Q status." ::= { swL2VLANMgmt 7 } -- ----------------------------------------------------------------------------- -- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } -- ----------------------------------------------------------------------------- swL2PortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port." ::= { swL2PortMgmt 1 } swL2PortInfoEntry OBJECT-TYPE SYNTAX SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port of the device." INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType } ::= { swL2PortInfoTable 1 } SwL2PortInfoEntry ::= SEQUENCE { swL2PortInfoPortIndex INTEGER, swL2PortInfoMediumType INTEGER, swL2PortInfoUnitID INTEGER, swL2PortInfoType INTEGER, swL2PortInfoLinkStatus INTEGER, swL2PortInfoNwayStatus INTEGER, -- swL2PortInfoModuleType -- INTEGER, swL2PortInfoErrorDisabled INTEGER } swL2PortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortInfoEntry 1 } swL2PortInfoMediumType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates medium type of the port number." ::={swL2PortInfoEntry 2} swL2PortInfoUnitID OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the unit in the system" ::= { swL2PortInfoEntry 3 } swL2PortInfoType OBJECT-TYPE SYNTAX INTEGER { portType-none(0), portType-100Base-T(2), portType-100Base-X(3), portType-1000Base-T(4), portType-1000Base-X(5), portType-10GBase-R(6), portType-10GBase-CX4(7), portType-SIO(8), portType-module-empty(9), portType-user-last(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the connector type of this port." ::= { swL2PortInfoEntry 4 } swL2PortInfoLinkStatus OBJECT-TYPE SYNTAX INTEGER { other(1), link-pass(2), link-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port link status." ::= { swL2PortInfoEntry 5 } swL2PortInfoNwayStatus OBJECT-TYPE SYNTAX INTEGER { link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port speed and duplex mode." ::= { swL2PortInfoEntry 6 } -- swL2PortInfoModuleType OBJECT-TYPE -- SYNTAX INTEGER { -- none(0), -- moduleType-COMBO(1), -- moduleType-1394(2), -- moduleType-1000T(3), -- moduleType-MGBIC(4), -- moduleType-1P-SC-SX(5), -- moduleType-2P-SC-SX(6), -- moduleType-1P-SC-LX(7), -- moduleType-2P-SC-LX(8), -- moduleType-1P-TX(9), -- moduleType-2P-TX(10), -- moduleType-1P-MTRJ-SX(11), -- moduleType-2P-MTRJ-SX(12), -- moduleType-1P-MTRJ-LX(13), -- moduleType-2P-MTRJ-LX(14), -- moduleType-1P-GBIC(15), -- moduleType-2P-GBIC(16), -- moduleType-1P-GBIC-1P-TX(17), -- moduleType-1P-GBIC-1P-STACK(18), -- moduleType-2P-STACK(19), -- moduleType-2P-100FX(20), -- moduleType-1P-100FX(21), -- moduleType-2P-100FX-NEW(22), -- moduleType-1P-100FL(23), -- moduleType-2P-100FL(24), -- moduleType-2P-100TX(25), -- moduleType-BaseModule-24PORT(26) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the module type of this port." -- ::= { swL2PortInfoEntry 7 } swL2PortInfoErrorDisabled OBJECT-TYPE SYNTAX INTEGER { none(0), storm(1), -- stp-lbd(2), unknow(3), ctp-lbd(4), ddm(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the blocking type of this port." ::= { swL2PortInfoEntry 8 } -- ----------------------------------------------------------------------------- swL2PortCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains control information about every port." ::= { swL2PortMgmt 2 } swL2PortCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of control information for each port of the device." INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType} ::= { swL2PortCtrlTable 1 } SwL2PortCtrlEntry ::= SEQUENCE { swL2PortCtrlPortIndex INTEGER, swL2PortCtrlMediumType INTEGER, swL2PortCtrlUnitIndex INTEGER, swL2PortCtrlAdminState INTEGER, swL2PortCtrlNwayState INTEGER, swL2PortCtrlFlowCtrlState INTEGER, swL2PortCtrlLearningState INTEGER, swL2PortCtrlMACNotifyState INTEGER, -- swL2PortCtrlMulticastfilter -- INTEGER swL2PortCtrlMDIXState INTEGER } swL2PortCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCtrlEntry 1 } swL2PortCtrlMediumType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates medium type of the port number." ::={ swL2PortCtrlEntry 2 } swL2PortCtrlUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the unit in the device" ::= { swL2PortCtrlEntry 3 } swL2PortCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the port is enabled or disabled." ::= { swL2PortCtrlEntry 4 } swL2PortCtrlNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Chose the port speed, duplex mode, and N-Way function mode." ::= { swL2PortCtrlEntry 5 } swL2PortCtrlFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames." ::= { swL2PortCtrlEntry 6 } swL2PortCtrlLearningState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the port is locked or not." ::= { swL2PortCtrlEntry 7 } swL2PortCtrlMACNotifyState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets each port's MAC notification state." ::= { swL2PortCtrlEntry 8 } -- swL2PortCtrlMulticastfilter OBJECT-TYPE -- SYNTAX INTEGER { -- other(0), -- forward-all-groups(1), -- forward-unregistered-groups(2), -- filter-unregistered-groups(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object controls the multicast port filtering mode for a specified port. " -- ::= { swL2PortCtrlEntry 9 } swL2PortCtrlMDIXState OBJECT-TYPE SYNTAX INTEGER { auto(1), normal(2), cross(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the MDIX setting of the port." ::= { swL2PortCtrlEntry 10 } swL2PortCtrlJumboFrame OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the switch's jumbo frame settings." ::= { swL2PortMgmt 3 } swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes how many bytes the max jumbo frame is." ::= { swL2PortMgmt 4 } -- swL2PortCableDiagnosisTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A table that contains cable diagnostic information about every port." -- ::= { swL2PortMgmt 5 } -- swL2PortCableDiagnosisEntry OBJECT-TYPE -- SYNTAX SwL2PortCableDiagnosisEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of cable diagnostic information for each port of the device." -- INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex } -- ::= { swL2PortCableDiagnosisTable 1 } -- SwL2PortCableDiagnosisEntry ::= -- SEQUENCE { -- swL2PortCableDiagnosisPortIndex -- INTEGER, -- swL2PortCableDiagnosisPairIndex -- INTEGER, -- swL2PortCableDiagnosisCableStatus -- INTEGER, -- swL2PortCableDiagnosisPairStatus -- INTEGER, -- swL2PortCableDiagnosisPairLength -- INTEGER, -- swL2PortCableDiagnosisPairLengthInaccuracy -- INTEGER -- } -- swL2PortCableDiagnosisPortIndex OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the module's port number.(1..Max port -- number in the module)" -- ::= { swL2PortCableDiagnosisEntry 1 } -- swL2PortCableDiagnosisPairIndex OBJECT-TYPE -- SYNTAX INTEGER (1..4) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates pair index of the port. -- The pair 1 means the pin 3 and 6 of the connector. -- The pair 2 means the pin 1 and 2 of the connector. -- The pair 3 means the pin 7 and 8 of the connector. -- The pair 4 means the pin 4 and 5 of the connector." -- ::= { swL2PortCableDiagnosisEntry 2 } -- swL2PortCableDiagnosisCableStatus OBJECT-TYPE -- SYNTAX INTEGER { -- ok(0), -- open(1), -- short(2), -- open-short(3), -- not-support(4), -- unknown(5) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the cable status." -- ::= { swL2PortCableDiagnosisEntry 3 } -- swL2PortCableDiagnosisPairStatus OBJECT-TYPE -- SYNTAX INTEGER { -- ok(0), -- open(1), -- short(2), -- fail(3), -- not-supported(4), -- unknown(5) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the status of the pair." -- ::= { swL2PortCableDiagnosisEntry 4 } -- swL2PortCableDiagnosisPairLength OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the approx. length or length to failure of -- the pair. The unit value is in meters." -- ::= { swL2PortCableDiagnosisEntry 5 } -- swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the inaccuracy of a pair length. The unit value is in meters." -- ::= { swL2PortCableDiagnosisEntry 6 } -- ----------------------------------------------------------------------------- -- swL2PortCounterCtrlTable -- ----------------------------------------------------------------------------- swL2PortCounterCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that used to clear counter information about every port." ::= { swL2PortMgmt 6 } swL2PortCounterCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCounterCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entry used to clear counter information for each port of the device." INDEX { swL2PortCounterCtrlPortIndex } ::= { swL2PortCounterCtrlTable 1 } SwL2PortCounterCtrlEntry ::= SEQUENCE { swL2PortCounterCtrlPortIndex INTEGER, swL2PortCounterClearCtrl INTEGER } swL2PortCounterCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCounterCtrlEntry 1 } swL2PortCounterClearCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if to clear the counters for each port of the device or not." ::= { swL2PortCounterCtrlEntry 2 } -- ----------------------------------------------------------------------------- -- swL2PortErrTable -- ----------------------------------------------------------------------------- swL2PortErrTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains error information for each port." ::= { swL2PortMgmt 7 } swL2PortErrEntry OBJECT-TYPE SYNTAX SwL2PortErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information regarding port errors on the device." INDEX { swL2PortErrPortIndex } ::= { swL2PortErrTable 1 } SwL2PortErrEntry ::= SEQUENCE { swL2PortErrPortIndex INTEGER, swL2PortErrPortState INTEGER, swL2PortErrPortConnStatus INTEGER, swL2PortErrPortReason INTEGER } swL2PortErrPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)." ::= { swL2PortErrEntry 1 } swL2PortErrPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port state is enabled or disabled." ::= { swL2PortErrEntry 2 } swL2PortErrPortConnStatus OBJECT-TYPE SYNTAX INTEGER { other(1), err-disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the PortStatus is err-disabled or not." ::= { swL2PortErrEntry 3 } swL2PortErrPortReason OBJECT-TYPE SYNTAX INTEGER { -- stp-lbd(1), storm-control(2), ctp-lbd(3), ddm(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes if the reason for the port error is STP LBD or Storm control." ::= { swL2PortErrEntry 4 } -- ----------------------------------------------------------------------------- -- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } -- ----------------------------------------------------------------------------- -- swL2QOSBandwidthControlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "." -- ::= { swL2QOSMgmt 1 } -- -- swL2QOSBandwidthControlEntry OBJECT-TYPE -- SYNTAX SwL2QOSBandwidthControlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information contained in the swL2QOSBandwidthControlTable." -- INDEX { swL2QOSBandwidthPortIndex } -- ::= { swL2QOSBandwidthControlTable 1 } -- -- SwL2QOSBandwidthControlEntry ::= -- SEQUENCE { -- swL2QOSBandwidthPortIndex -- INTEGER, -- swL2QOSBandwidthRxRate -- INTEGER, -- swL2QOSBandwidthTxRate -- INTEGER, -- swL2QOSBandwidthRadiusRxRate --- INTEGER, -- swL2QOSBandwidthRadiusTxRate -- INTEGER -- } -- -- swL2QOSBandwidthPortIndex OBJECT-TYPE -- SYNTAX INTEGER (1..768) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the port ." -- ::= { swL2QOSBandwidthControlEntry 1 } -- -- swL2QOSBandwidthRxRate OBJECT-TYPE -- SYNTAX INTEGER (64..1024001) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates RX Rate of the specified port. Value 1024001 means no limit." -- ::= { swL2QOSBandwidthControlEntry 2 } -- -- swL2QOSBandwidthTxRate OBJECT-TYPE -- SYNTAX INTEGER (64..1024001) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates TX Rate of the specified port. Value 1024001 means no limit." -- ::= { swL2QOSBandwidthControlEntry 3 } -- -- swL2QOSBandwidthRadiusRxRate OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The RxRate value comes from RADIUS server, -- If an 802.1X port is authenticated, this value -- will overwrites the locally configured RxRate. " -- ::= { swL2QOSBandwidthControlEntry 4 } -- swL2QOSBandwidthRadiusTxRate OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The TxRate value comes from RADIUS server, -- If an 802.1X port is authenticated, this value -- will overwrites the locally configured TxRate. " -- ::= { swL2QOSBandwidthControlEntry 5 } -- -- ----------------------------------------------------------------------------- -- -- swL2QOSSchedulingTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "." -- ::= { swL2QOSMgmt 2 } -- -- swL2QOSSchedulingEntry OBJECT-TYPE -- SYNTAX SwL2QOSSchedulingEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information contained in the swL2QOSSchedulingTable." -- INDEX { swL2QOSSchedulingClassIndex } -- ::= { swL2QOSSchedulingTable 1 } -- -- SwL2QOSSchedulingEntry ::= -- SEQUENCE { -- swL2QOSSchedulingClassIndex -- INTEGER, -- swL2QOSSchedulingMaxPkts -- INTEGER, -- swL2QOSSchedulingMechanism -- INTEGER, -- swL2QOSSchedulingMaxLatency -- INTEGER -- } -- -- swL2QOSSchedulingClassIndex OBJECT-TYPE -- SYNTAX INTEGER (0..7) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the hardware queue number." -- ::= { swL2QOSSchedulingEntry 1 } -- -- swL2QOSSchedulingMaxPkts OBJECT-TYPE -- SYNTAX INTEGER (0..15) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the maximum number of packets the hardware priority queue will be allowed -- to transmit before allowing the next lowest priority queue to transmit its packets. -- a value between 0 and 15 can be specified." -- ::= { swL2QOSSchedulingEntry 2 } -- -- swL2QOSSchedulingMechanism OBJECT-TYPE -- SYNTAX INTEGER { -- strict(1), -- roundrobin(2), -- weightfair(3) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the mechanism of QoS scheduling." -- ::= { swL2QOSSchedulingEntry 3 } -- -- swL2QOSSchedulingMaxLatency OBJECT-TYPE -- SYNTAX INTEGER (0..255) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the maximum amount of time the hardware priority queue will be allowed -- to transmit packets before allowing the next lowest priority queue to begin transmitting -- its packets. A value between 0 and 255 can be specified- with this value multiplied -- by 16 ms to arrive at the total allowed time for queue to transmit packets. -- For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting -- the last packet until it is finished when the max_latency timer expires. " -- ::= { swL2QOSSchedulingEntry 4} -- -- ----------------------------------------------------------------------------- -- -- swL2QOS8021pUserPriorityTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "." -- ::= { swL2QOSMgmt 3 } -- -- swL2QOS8021pUserPriorityEntry OBJECT-TYPE -- SYNTAX SwL2QOS8021pUserPriorityEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information contained in the swL2QOS8021pUserPriorityTable." -- INDEX { swL2QOS8021pUserPriorityIndex } -- ::= { swL2QOS8021pUserPriorityTable 1 } -- -- SwL2QOS8021pUserPriorityEntry ::= -- SEQUENCE { -- swL2QOS8021pUserPriorityIndex -- INTEGER, -- swL2QOS8021pUserPriorityClass -- INTEGER -- } -- -- swL2QOS8021pUserPriorityIndex OBJECT-TYPE -- SYNTAX INTEGER (0..7) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The 802.1p user priority ." -- ::= { swL2QOS8021pUserPriorityEntry 1 } -- -- swL2QOS8021pUserPriorityClass OBJECT-TYPE -- SYNTAX INTEGER (0..6) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The number of the switch's hardware priority queue. The switch has seven hardware -- priority queues available. They are numbered between 0 (the lowest priority) -- and 6 (the highest priority)." -- ::= { swL2QOS8021pUserPriorityEntry 2 } -- -- ----------------------------------------------------------------------------- -- -- swL2QOS8021pDefaultPriorityTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "." -- ::= { swL2QOSMgmt 4 } -- -- swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE -- SYNTAX SwL2QOS8021pDefaultPriorityEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information contained in the swL2QOS8021pDefaultPriorityTable." -- INDEX { swL2QOS8021pDefaultPriorityIndex } -- ::= { swL2QOS8021pDefaultPriorityTable 1 } -- -- SwL2QOS8021pDefaultPriorityEntry ::= -- SEQUENCE { -- swL2QOS8021pDefaultPriorityIndex -- INTEGER, -- swL2QOS8021pDefaultPriority -- INTEGER, -- swL2QOS8021pRadiusPriority -- INTEGER -- } -- -- swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE -- SYNTAX INTEGER (1..768) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the port number ." -- ::= { swL2QOS8021pDefaultPriorityEntry 1 } -- -- swL2QOS8021pDefaultPriority OBJECT-TYPE -- SYNTAX INTEGER (0..7) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "The priority value to assign to untagged packets received by the -- switch ports on the switch.." -- ::= { swL2QOS8021pDefaultPriorityEntry 2 } -- -- swL2QOS8021pRadiusPriority OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The value of 802.1p comes from RADIUS server. -- If an 802.1X port is authenticated, this value -- will overwrite the local configured value." -- ::= { swL2QOS8021pDefaultPriorityEntry 3 } -- -- swL2QOSSchedulingMechanismCtrl OBJECT-TYPE -- SYNTAX INTEGER { -- strict(1), -- roundrobin(2), -- weightfair(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object controls QoS scheduling Mechanism." -- ::= { swL2QOSMgmt 5 } -- -- swL2QOSHolPreventionCtrl OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Controls QoS HoL Prevention" -- ::= { swL2QOSMgmt 6 } -- -- ----------------------------------------------------------------------------- -- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } -- ----------------------------------------------------------------------------- -- -- swL2PortSecurityControlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A port security feature which controls the address leaning capability and -- traffic forwarding decisions. Each port can be enabled or disabled for this function. -- When it is enabled and a number is given said N, which allows N addresses to be -- learned on this port, the first N learned addresses are locked at this port as -- static entries. When the learned addresses number reaches N, any incoming packet -- without learned source addresses are discarded (e.g. dropped) and no more new -- addresses can be learned on this port." -- ::= { swL2PortSecurityMgmt 1 } -- -- swL2PortSecurityControlEntry OBJECT-TYPE -- SYNTAX SwL2PortSecurityControlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information contained in the swL2PortSecurityControlTable." -- INDEX { swL2PortSecurityPortIndex } -- ::= { swL2PortSecurityControlTable 1 } -- -- SwL2PortSecurityControlEntry ::= -- SEQUENCE { -- swL2PortSecurityPortIndex -- INTEGER, -- swL2PortSecurityMaxLernAddr -- INTEGER, -- swL2PortSecurityMode -- INTEGER, -- swL2PortSecurityAdmState -- INTEGER, -- swL2PortSecurityEntryClearCtrl -- INTEGER -- } -- -- swL2PortSecurityPortIndex OBJECT-TYPE -- SYNTAX INTEGER (1..768) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the secured port to lock address learning." -- ::= { swL2PortSecurityControlEntry 1 } -- -- swL2PortSecurityMaxLernAddr OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates allowable number of addresses to be learned on this port." -- ::= { swL2PortSecurityControlEntry 2 } -- -- swL2PortSecurityMode OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- permanent(2), -- deleteOnTimeout(3), -- deleteOnReset(4) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the mode of locking address. -- In deleteOnTimeout(3) mode - the locked addresses can be aged out after -- the aging timer expires. In this mode, when the locked address is aged -- out, the number of addresses that can be learned has to be increased by one. -- In deleteOnReset(4) mode - Locked addresses never age out unless the system -- restarts which will prevent port movement or intrusion." -- ::= { swL2PortSecurityControlEntry 3 } -- -- swL2PortSecurityAdmState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- enable(2), -- disable(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates administration state of locking address." -- ::= { swL2PortSecurityControlEntry 4 } -- -- swL2PortSecurityEntryClearCtrl OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- start(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Used to clear port security entries by port. -- Setting this value to 'start' will execute the clear action, -- Once cleared, the value returns to 'other'." -- ::= { swL2PortSecurityControlEntry 5 } -- -- ------------------------------------------------------------------------------ -- -- swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 2 } -- -- swL2PortSecurityDelVlanName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..32)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates VLAN name." -- ::= { swL2PortSecurityDelCtrl 1 } -- -- swL2PortSecurityDelPort OBJECT-TYPE -- SYNTAX INTEGER (1..768) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicates the port." -- ::= { swL2PortSecurityDelCtrl 2 } -- -- swL2PortSecurityDelMacAddress OBJECT-TYPE -- SYNTAX MacAddress -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Specifies a MAC address." -- ::= { swL2PortSecurityDelCtrl 3 } -- -- swL2PortSecurityDelActivity OBJECT-TYPE -- SYNTAX INTEGER { -- none(1), -- start(2) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "." -- ::= { swL2PortSecurityDelCtrl 4 } -- -- ----------------------------------------------------------------------------- -- swL2PortSecurityTrapLogState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- enable(2), -- disable(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "When enabled(2),whenever there's a new MAC address that violates -- the pre-defined port security configuration, traps will be sent out -- and the relevant information will be logged into the system." -- ::= { swL2PortSecurityMgmt 3 } -- -- ----------------------------------------------------------------------------- -- swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } -- ----------------------------------------------------------------------------- -- swL2DhcpRelayState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the DHCP relay function is enabled or -- disabled." -- ::= { swL2DhcpRelayMgmt 1 } -- swL2DhcpRelayHopCount OBJECT-TYPE -- SYNTAX INTEGER (1..16) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the maximum number of router hops that -- DHCP packets can cross." -- ::= { swL2DhcpRelayMgmt 2 } -- swL2DhcpRelayTimeThreshold OBJECT-TYPE -- SYNTAX INTEGER (0..65535) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the minimum time in seconds within which -- the switch must relay the DHCP request. If this time is -- exceeded, the switch will drop the DHCP packet." -- ::= { swL2DhcpRelayMgmt 3 } -- swL2DhcpRelayOption82State OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the DHCP relay agent information option 82 -- function is enabled or disabled." -- ::= { swL2DhcpRelayMgmt 4 } -- swL2DhcpRelayOption82Check OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates if the checking mechanism of DHCP relay agent -- information option 82 is enabled or disabled." -- ::= { swL2DhcpRelayMgmt 5 } -- swL2DhcpRelayOption82Policy OBJECT-TYPE -- SYNTAX INTEGER { -- replace(1), -- drop(2), -- keep(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the reforwarding policy of DHCP relay agent -- information option 82. -- -- replace(1) - replace the exiting option 82 field in messages. -- drop(2) - discard messages with existing option 82 field. -- keep(3) - retain the existing option 82 field messages." -- ::= { swL2DhcpRelayMgmt 6 } -- swL2DhcpRelayCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2DhcpRelayCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table specifies the IP address as a destination to forward -- (relay) DHCP packets to." -- ::= { swL2DhcpRelayMgmt 7 } -- swL2DhcpRelayCtrlEntry OBJECT-TYPE -- SYNTAX SwL2DhcpRelayCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information that specifies the IP address as a destination -- to forward (relay) DHCP packets to." -- INDEX { swL2DhcpRelayCtrlInterfaceName, swL2DhcpRelayCtrlServer} -- ::= { swL2DhcpRelayCtrlTable 1 } -- SwL2DhcpRelayCtrlEntry ::= -- SEQUENCE { -- swL2DhcpRelayCtrlInterfaceName -- DisplayString, -- swL2DhcpRelayCtrlServer -- IpAddress, -- swL2DhcpRelayCtrlState -- INTEGER -- } -- swL2DhcpRelayCtrlInterfaceName OBJECT-TYPE -- SYNTAX DisplayString (SIZE(1..12)) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The name of the IP interface." -- ::= { swL2DhcpRelayCtrlEntry 1 } -- swL2DhcpRelayCtrlServer OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "The DHCP server IP address." -- ::= { swL2DhcpRelayCtrlEntry 2 } -- swL2DhcpRelayCtrlState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- invalid(2), -- valid(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- -- other(1) - this entry is currently in use but the conditions -- under which it will remain so are different from each of -- the following values. -- invalid(2) - writing this value to the object, and then the -- corresponding entry will be removed from the table. -- valid(3) - this entry resides in the table." -- ::= { swL2DhcpRelayCtrlEntry 3 } -- ----------------------------------------------------------------------------- -- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } -- ----------------------------------------------------------------------------- swL2TrunkMaxSupportedEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable)." ::= { swL2TrunkMgmt 1 } swL2TrunkCurrentNumEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Current active number of entries in the trunk configuration table." ::= { swL2TrunkMgmt 2 } swL2TrunkCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies which ports group a set of ports(up to 8) into a single logical link." ::= { swL2TrunkMgmt 3 } swL2TrunkCtrlEntry OBJECT-TYPE SYNTAX SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information that specifies which ports group a set of ports(up to 8) into a single logical link." INDEX { swL2TrunkIndex } ::= { swL2TrunkCtrlTable 1 } SwL2TrunkCtrlEntry ::= SEQUENCE { swL2TrunkIndex INTEGER, -- swL2TrunkName -- DisplayString, swL2TrunkMasterPort INTEGER, swL2TrunkMember PortList, swL2TrunkFloodingPort INTEGER, swL2TrunkType INTEGER, swL2TrunkState RowStatus } swL2TrunkIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module." ::= { swL2TrunkCtrlEntry 1 } -- swL2TrunkName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..12)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The name of logical port trunk group." -- ::= { swL2TrunkCtrlEntry 2 } swL2TrunkMasterPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)." ::= { swL2TrunkCtrlEntry 3 } swL2TrunkMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group." ::= { swL2TrunkCtrlEntry 4 } swL2TrunkFloodingPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port." ::= { swL2TrunkCtrlEntry 5 } swL2TrunkType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), lacp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group . " ::= { swL2TrunkCtrlEntry 6 } swL2TrunkState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2TrunkCtrlEntry 7 } swL2TrunkAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data." ::= { swL2TrunkMgmt 4 } swL2TrunkLACPPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies which ports group a set of ports(up to 8) into a single logical link." ::= { swL2TrunkMgmt 5 } swL2TrunkLACPPortEntry OBJECT-TYPE SYNTAX SwL2TrunkLACPPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies which ports group a set of ports(up to 8) into a single logical link." INDEX { swL2TrunkLACPPortIndex } ::= { swL2TrunkLACPPortTable 1 } SwL2TrunkLACPPortEntry ::= SEQUENCE { swL2TrunkLACPPortIndex INTEGER, swL2TrunkLACPPortState INTEGER } swL2TrunkLACPPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port LACP. " ::= { swL2TrunkLACPPortEntry 1 } swL2TrunkLACPPortState OBJECT-TYPE SYNTAX INTEGER{ active(1), passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of logical port LACP." ::= { swL2TrunkLACPPortEntry 2 } -- ----------------------------------------------------------------------------- -- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } -- ----------------------------------------------------------------------------- swL2MirrorLogicTargetPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the sequential (logical) number which is also applied to the bridge MIB, etc." ::= { swL2MirrorMgmt 1 } swL2MirrorPortSourceIngress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the port where ingress packets will be sniffed." ::= { swL2MirrorMgmt 2 } swL2MirrorPortSourceEgress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the port where egress packets will be sniffed." ::= { swL2MirrorMgmt 3 } swL2MirrorPortState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled(3) - This entry resides in the table." ::= { swL2MirrorMgmt 4 } -- ----------------------------------------------------------------------------- -- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } -- ----------------------------------------------------------------------------- swL2TrafficSegTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrafficSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies that the port can just forward traffic to the specific port list." ::= { swL2TrafficSegMgmt 1 } swL2TrafficSegEntry OBJECT-TYPE SYNTAX SwL2TrafficSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information which specifies the port with its traffic forwarding list." INDEX { swL2TrafficSegPort } ::= { swL2TrafficSegTable 1 } SwL2TrafficSegEntry ::= SEQUENCE { swL2TrafficSegPort INTEGER, swL2TrafficSegForwardPorts PortList } swL2TrafficSegPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the logical port." ::= { swL2TrafficSegEntry 1 } swL2TrafficSegForwardPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The port list to which the specific port can forward traffic." ::= { swL2TrafficSegEntry 2 } -- ----------------------------------------------------------------------------- -- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 } -- ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------- -- swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } -- ---------------------------------------------------------------------------- swL2MulticastFilterModeVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterModeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about VLAN multicast filter mode." ::={swL2MulticastFilterMode 1} swL2MulticastFilterModeVlanEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterModeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast filter mode information for each VLAN. " INDEX {swL2MulticastFilterVid} ::={swL2MulticastFilterModeVlanTable 1} SwL2MulticastFilterModeVlanEntry ::= SEQUENCE{ swL2MulticastFilterVid INTEGER, swL2MulticastFilterVlanMode INTEGER } swL2MulticastFilterVid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates VID for each VLAN." ::={swL2MulticastFilterModeVlanEntry 1} swL2MulticastFilterVlanMode OBJECT-TYPE SYNTAX INTEGER{ forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies multicast filter mode for each VLAN." ::={swL2MulticastFilterModeVlanEntry 2} -- ---------------------------------------------------------------------------- -- swL2MulticastFilterModePortTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2MulticastFilterModePortEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " A table that contains information about port multicast filter mode." -- ::={swL2MulticastFilterMode 2} -- -- swL2MulticastFilterModePortEntry OBJECT-TYPE -- SYNTAX SwL2MulticastFilterModePortEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of multicast filter mode information for each port. " -- INDEX {swL2MulticastFilterPortIndex} -- ::={swL2MulticastFilterModePortTable 1} -- -- SwL2MulticastFilterModePortEntry ::= -- SEQUENCE{ -- swL2MulticastFilterPortIndex -- INTEGER, -- swL2MulticastFilterPortMode -- INTEGER -- } -- -- swL2MulticastFilterPortIndex OBJECT-TYPE -- SYNTAX INTEGER(1..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Specifies the port number." -- ::={swL2MulticastFilterModePortEntry 1} -- -- swL2MulticastFilterPortMode OBJECT-TYPE -- SYNTAX INTEGER{ -- forward-all-groups(1), -- forward-unregistered-groups(2), -- filter-unregistered-groups(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Specifies multicast filter mode for each port." -- ::={swL2MulticastFilterModePortEntry 2} -- ---------------------------------------------------------------------------- -- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 } -- ---------------------------------------------------------------------------- swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 } swL2LoopDetectAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection status for the system." ::= { swL2LoopDetectCtrl 1 } swL2LoopDetectInterval OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the interval value, the range is from 1 to 32767 seconds." ::= { swL2LoopDetectCtrl 2 } swL2LoopDetectRecoverTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function." ::= { swL2LoopDetectCtrl 3 } swL2LoopDetectMode OBJECT-TYPE SYNTAX INTEGER { vlan-based(1), port-based(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection mode for the system." ::= { swL2LoopDetectCtrl 4 } swL2LoopDetectTrapMode OBJECT-TYPE SYNTAX INTEGER { none(1), loop-detected(2), loop-cleared(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection trap mode for the system." ::= { swL2LoopDetectCtrl 5 } -- ---------------------------------------------------------------------------- swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 } swL2LoopDetectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the loopback detection function specified by port." ::= { swL2LoopDetectPortMgmt 1 } swL2LoopDetectPortEntry OBJECT-TYPE SYNTAX SwL2LoopDetectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the loopback detection function specified by port." INDEX { swL2LoopDetectPortIndex } ::= { swL2LoopDetectPortTable 1 } SwL2LoopDetectPortEntry ::= SEQUENCE { swL2LoopDetectPortIndex INTEGER, swL2LoopDetectPortState INTEGER, swL2LoopDetectPortLoopVLAN DisplayString, swL2LoopDetectPortLoopStatus INTEGER } swL2LoopDetectPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module" ::= { swL2LoopDetectPortEntry 1 } swL2LoopDetectPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection function state on the port." ::= { swL2LoopDetectPortEntry 2 } swL2LoopDetectPortLoopVLAN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN list that has detected a loopback." ::= { swL2LoopDetectPortEntry 3 } swL2LoopDetectPortLoopStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), loop(2), error(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port status." ::= { swL2LoopDetectPortEntry 4 } -- ******************************************************************** -- swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 } -- ******************************************************************** swL2DhcpLocalRelayState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of the DHCP local relay function of the switch." ::= { swL2DhcpLocalRelayMgmt 1 } swL2DhcpLocalRelayVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DhcpLocalRelayVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the DHCP local relay status for each VLAN." ::={ swL2DhcpLocalRelayMgmt 2} swL2DhcpLocalRelayVLANEntry OBJECT-TYPE SYNTAX SwL2DhcpLocalRelayVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object lists the current VLANs in the switch and their corresponding DHCP local relay status." INDEX { swL2DhcpLocalRelayVLANID } ::={ swL2DhcpLocalRelayVLANTable 1 } SwL2DhcpLocalRelayVLANEntry ::= SEQUENCE{ swL2DhcpLocalRelayVLANID INTEGER, swL2DhcpLocalRelayVLANState INTEGER } swL2DhcpLocalRelayVLANID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the VIDs of the current VLANS in the switch." ::= { swL2DhcpLocalRelayVLANEntry 1 } swL2DhcpLocalRelayVLANState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of the DHCP relay function of the VLAN." ::= { swL2DhcpLocalRelayVLANEntry 2 } -- ----------------------------------------------------------------------------- -- Layer 2 Trap -- ----------------------------------------------------------------------------- swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 } swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 } swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 } swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 } -- ----------------------------------------------------------------------------- -- swL2NotifyMgmt -- ----------------------------------------------------------------------------- -- swL2macNotificationSeverity OBJECT-TYPE -- SYNTAX AgentNotifyLevel -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicate the level of macNotification detection." -- ::= { swL2NotifyMgmt 1 } -- swL2PortSecurityViolationSeverity OBJECT-TYPE -- SYNTAX AgentNotifyLevel -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Indicate the level of PortSecurityViolation detection." -- ::= { swL2NotifyMgmt 2 } -- ----------------------------------------------------------------------------- -- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 } -- ----------------------------------------------------------------------------- swL2macNotification NOTIFICATION-TYPE OBJECTS { swL2macNotifyInfo } STATUS current DESCRIPTION " This trap indicates the MAC addresses variation in address table . " ::= { swL2NotifFirmware 1 } -- swL2PortSecurityViolationTrap NOTIFICATION-TYPE -- OBJECTS { -- swL2PortSecurityPortIndex, -- swL2PortSecurityViolationMac -- } -- STATUS current -- DESCRIPTION -- "When the port_security trap is enabled, new MAC addresses that violate -- the pre-defined port security configuration will trigger trap messages -- to be sent out." -- ::= { swL2NotifFirmware 2 } swL2PortLoopOccurred NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex } STATUS current DESCRIPTION "The trap is sent when a Port loop occurs." ::={swL2NotifFirmware 3} swL2PortLoopRestart NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex } STATUS current DESCRIPTION "The trap is sent when a Port loop restarts after the interval time." ::={swL2NotifFirmware 4} swL2VlanLoopOccurred NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex, swL2VlanLoopDetectVID } STATUS current DESCRIPTION "The trap is sent when a Port with a VID loop occurs." ::={swL2NotifFirmware 5} swL2VlanLoopRestart NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex, swL2VlanLoopDetectVID } STATUS current DESCRIPTION "The trap is sent when a Port with a VID loop restarts after the interval time." ::={swL2NotifFirmware 6} -- ----------------------------------------------------------------------------- -- notificationBidings -- ----------------------------------------------------------------------------- swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 } swL2macNotifyInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the last time reboot information." ::= { swl2NotificationBidings 1 } -- swL2PortSecurityViolationMac OBJECT-TYPE -- SYNTAX MacAddress -- MAX-ACCESS accessible-for-notify -- STATUS current -- DESCRIPTION -- "This object indicates the MAC address that violates the port security configuration." -- ::= { swl2NotificationBidings 2 } swL2VlanLoopDetectVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VID that detected a loopback." ::= { swl2NotificationBidings 3 } END