-- ----------------------------------------------------------------------------- -- MODIFICTION HISTORY: -- ----------------------------------------------------------------------------- -- Version, Date, Author -- Description: -- [New Object] -- [Modification] -- Notes: (Requested by who and which project) -- -- Version 0.03, 2008/05/22, Shan Lu -- [Modifycation] -- To add the objects "swL3TraceRoutePKTToCPUState". -- Note: Requested by D-Link, DES3800 -- -- Version 0.02, 2008/04/15, Elvis Tsai -- [Modifycation] -- To add the objects for ospf default info originate -- "swL3OspfDefaultInfoOriginateState" -- "swL3OspfDefaultInfoOriginateAlways" -- "swL3OspfDefaultInfoOriginateMettype" -- "swL3OspfDefaultInfoOriginateMetric". -- Note: Requested by D-Link, DES3800 -- -- Version 0.01, 2008/02/14, Ronald -- [Modification] -- To add the objects "swL3DevCtrlOSPFECMPState". -- Notes: Requested by D-Link, DES3800 -- ----------------------------------------------------------------------------- DES3828DC-SWL3MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32,MODULE-IDENTITY,OBJECT-TYPE,IpAddress, NOTIFICATION-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI PhysAddress,TruthValue,DisplayString,RowStatus FROM SNMPv2-TC des3828DC FROM SW3800PRIMGMT-MIB TOSType, Metric, AreaID, RouterID,UpToMaxAge, HelloRange, PositiveInteger, Status, DesignatedRouterPriority FROM OSPF-MIB InterfaceIndex FROM IF-MIB; swL3MgmtMIB MODULE-IDENTITY LAST-UPDATED "0805220000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "The Structure of Layer 3 Network Management Information for the proprietary enterprise." ::= { des3828DC 3 } NodeAddress ::= OCTET STRING (SIZE(6)) NetAddress ::= OCTET STRING (SIZE(4)) swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } swL3IpMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 2 } swL3RelayMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 3 } -- swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 1 } swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 } -- ******************************************************************** -- swL3DevMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 1 } -- ******************************************************************** swL3DevCtrl OBJECT IDENTIFIER ::= { swL3DevMgmt 1 } swL3DevCtrlRIPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the Routing Information Protocol (RIP) version 2 function is enabled or disabled." ::= { swL3DevCtrl 1 } swL3DevCtrlOSPFState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the OSPF protocol is enabled or disabled." ::= { swL3DevCtrl 2 } swL3DevCtrlDVMRPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DVMRP protocol is enabled or disabled." ::= { swL3DevCtrl 3 } swL3DevCtrlPIMState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the PIM protocol is enabled or disabled." ::= { swL3DevCtrl 4 } swL3DevCtrlVRRPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the VRRP protocol is enabled or disabled." ::= { swL3DevCtrl 5 } -- swL3DevCtrARPStormState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " " -- ::= { swL3DevCtrl 6 } -- swL3DevCtrARPStormThreshold OBJECT-TYPE -- SYNTAX INTEGER (8..1024) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- " " -- ::= { swL3DevCtrl 7 } swL3DevCtrlOSPFECMPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the ECMP for OSPF protocol is enabled or disabled." ::= { swL3DevCtrl 8 } -- ******************************************************************** -- swL3IpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 1 } -- ******************************************************************** swL3IpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IP interface information." ::= { swL3IpCtrlMgmt 1 } swL3IpCtrlEntry OBJECT-TYPE SYNTAX SwL3IpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific IP interface." INDEX { swL3IpCtrlIpAddr } ::= { swL3IpCtrlTable 1 } SwL3IpCtrlEntry ::= SEQUENCE { swL3IpCtrlIpAddr IpAddress, swL3IpCtrlIfIndex INTEGER, swL3IpCtrlInterfaceName DisplayString, swL3IpCtrlIpSubnetMask IpAddress, swL3IpCtrlVlanName DisplayString, swL3IpCtrlMode INTEGER, swL3IpCtrlSecondary TruthValue, swL3IpCtrlState RowStatus, swL3IpCtrlOperState INTEGER, swL3IpCtrlProxyARPState INTEGER } swL3IpCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address of the interface. This object can only contain the value of the unicast IP address." ::= { swL3IpCtrlEntry 1 } swL3IpCtrlIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the IP interface number in the swL3IpCtrlTable." ::= { swL3IpCtrlEntry 2 } swL3IpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the name of the IP interface." ::= { swL3IpCtrlEntry 3 } swL3IpCtrlIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP net mask for this interface." ::= { swL3IpCtrlEntry 4 } swL3IpCtrlVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP control entry's VLAN name. The VLAN name in each entry must be unique in the IP Control Table." ::= { swL3IpCtrlEntry 5 } swL3IpCtrlMode OBJECT-TYPE SYNTAX INTEGER { other(1), manual(2), bootp(3), dhcp(4) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the IP operation mode. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. manual (2) - The IP address will be set manually. bootp (3) - The IP address will be set automatically from the BOOTP server. dhcp (4) - The IP address will be set automatically from the DHCP server." ::= { swL3IpCtrlEntry 6 } swL3IpCtrlSecondary OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When this is true (1) the IP address is the secondary IP. When false (2), the IP address is the primary IP." ::= { swL3IpCtrlEntry 7 } swL3IpCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of objects is in this table." ::= { swL3IpCtrlEntry 8 } swL3IpCtrlOperState OBJECT-TYPE SYNTAX INTEGER { other(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the IP interface." ::= { swL3IpCtrlEntry 9 } swL3IpCtrlProxyARPState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates if the Proxy ARP function is enabled or disabled." ::= { swL3IpCtrlEntry 10 } -- ******************************************************************** -- swL3VirtualIpCtrlMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- ******************************************************************** swL3VirtualIpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3VirtualIpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the virtual IP interface information." ::= { swL3IpCtrlMgmt 2 } swL3VirtualIpCtrlEntry OBJECT-TYPE SYNTAX SwL3VirtualIpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information about a specific virtual IP interface." INDEX { swL3VirtualIpCtrlInterfaceName } ::= { swL3VirtualIpCtrlTable 1 } SwL3VirtualIpCtrlEntry ::= SEQUENCE { swL3VirtualIpCtrlInterfaceName DisplayString, swL3VirtualIpCtrlIfIndex INTEGER, swL3VirtualIpCtrlIpAddr IpAddress, swL3VirtualIpCtrlIpSubnetMask IpAddress, swL3VirtualIpCtrlOperState INTEGER, swL3VirtualIpCtrlState RowStatus } swL3VirtualIpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..12)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the virtual IP interface." ::= { swL3VirtualIpCtrlEntry 1 } swL3VirtualIpCtrlIfIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object uniquely identifies the virtual IP interface number in the swL3VirtualIpCtrlEntry." ::= { swL3VirtualIpCtrlEntry 2 } swL3VirtualIpCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The virtual IP address of the interface. This object can only take the value of the unicast IP address." ::= { swL3VirtualIpCtrlEntry 3 } swL3VirtualIpCtrlIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The net mask for this interface." ::= { swL3VirtualIpCtrlEntry 4 } swL3VirtualIpCtrlOperState OBJECT-TYPE SYNTAX INTEGER { other(1), up(2), down(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational state of the virtual IP interface." ::= { swL3VirtualIpCtrlEntry 5 } swL3VirtualIpCtrlState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. The status used for creating, modifying, and deleting instances of the objects in this table." ::= { swL3VirtualIpCtrlEntry 9 } -- ******************************************************************** -- swL3IpFdbMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 2 } -- ******************************************************************** swL3IpFdbInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains forwarding and/or filtering information. This information is used by the switch to determine how to propagate the received IP packets." ::= { swL3IpFdbMgmt 1 } swL3IpFdbInfoEntry OBJECT-TYPE SYNTAX SwL3IpFdbInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a specific IP address for which the bridge has some forwarding and/or filtering information." INDEX { swL3IpFdbInfoIpAddr } ::= { swL3IpFdbInfoTable 1 } SwL3IpFdbInfoEntry ::= SEQUENCE { -- swL3IpFdbInfoRdIndex -- INTEGER, swL3IpFdbInfoIpAddr IpAddress, swL3IpFdbInfoIpSubnetMask IpAddress, swL3IpFdbInfoPort INTEGER, swL3IpFdbInfoType INTEGER } -- swL3IpFdbInfoRdIndex OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the IP routing domain index and should -- be associated with one of the swL3IpDomainStatsIndex." -- ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An IP address for which the switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 1 } swL3IpFdbInfoIpSubnetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "An IP net mask for this interface for which the switch has forwarding and/or filtering information." ::= { swL3IpFdbInfoEntry 2 } swL3IpFdbInfoPort OBJECT-TYPE SYNTAX INTEGER(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Either the value '0', or the port number of the packet that has an IP address equal to the value of the corresponding instance of swL3IpFdbInfoIpAddr that has been seen. A value of '0' indicates that the port number has not been learned, but that the switch does have some forwarding/filtering information about this address." ::= { swL3IpFdbInfoEntry 3 } swL3IpFdbInfoType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), dynamic(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry." ::= { swL3IpFdbInfoEntry 4 } -- ******************************************************************** -- swL3IpFilterMgmt OBJECT IDENTIFIER ::= { swL3IpMgmt 3 } -- ******************************************************************** -- swL3IpFilterAddrConfig OBJECT IDENTIFIER ::= { swL3IpFilterMgmt 1 } -- swL3IpFilterAddrMaxSupportedEntries OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Maximum number of entries in the IP address filtering table -- (swL3IpFilterAddrCtrlTable) ." -- ::= { swL3IpFilterAddrConfig 1 } -- swL3IpFilterAddrCurrentTotalEntries OBJECT-TYPE -- SYNTAX INTEGER(0..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Current applied number of entries in the IP address filtering -- table. If the swL3IpFilterAddrCtrlState = dst-src-addr, then it -- means there are two entries in swL3IpFilterAddrCtrlTable." -- ::= { swL3IpFilterAddrConfig 2 } -- swL3IpFilterAddrCtrlTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL3IpFilterAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "This table defines the information for the device to filter packets -- with specific IP addresses (either as the DA and/or as the SA). -- The IP address can be either a unicast address or a multicast address. -- This table has a higher priority then both the static FDB table and -- the IGMP table. It means that if an IP address appears in this table -- it will also appear on the static FDB table, the device will use the -- information provided in this table to process the packet." -- ::= { swL3IpFilterAddrConfig 3 } -- swL3IpFilterAddrCtrlEntry OBJECT-TYPE -- SYNTAX SwL3IpFilterAddrCtrlEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information about a specific unicast/multicast IP -- address for which the switch has filtering information." -- INDEX { swL3IpFilterAddrIpAddr } -- ::= { swL3IpFilterAddrCtrlTable 1 } -- SwL3IpFilterAddrCtrlEntry ::= -- SEQUENCE { -- swL3IpFilterAddrIpAddr -- IpAddress, -- swL3IpFilterAddrIpSktGE -- INTEGER, -- swL3IpFilterAddrIpSktLE -- INTEGER, -- swL3IpFilterAddrCtrlState -- INTEGER -- } -- swL3IpFilterAddrIpAddr OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates a unicast/multicast IP address for which -- the switch has filtering information. But if the -- swL3IpFilterAddrCtrlState = src-addr, then the object can not be -- a multicast IP address (Class D IP address)." -- ::= { swL3IpFilterAddrCtrlEntry 1 } -- swL3IpFilterAddrIpSktGE OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates a socket number which should be greater than -- or equal to the used socket number" -- ::= { swL3IpFilterAddrCtrlEntry 2 } -- swL3IpFilterAddrIpSktLE OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates a socket number which should be less than -- or equal to the used socket number" -- ::= { swL3IpFilterAddrCtrlEntry 3 } -- swL3IpFilterAddrCtrlState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- dst-addr(2), -- src-addr(3), -- dst-src-addr(4), -- invalid(5) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the status of this entry. -- other (1) - This entry is currently in use but the conditions -- under which it will remain so are different from each of the -- following values. -- dst-addr (2) - Received frames's destination addresses are -- currently filtered when they match with an IP -- address entry of the table. -- src-addr (3) - Received frames's source addresses are currently -- filtered when they match with an IP address entry of -- the table. -- dst-src-addr (4) - Received frames's destination addresses or -- source addresses are currently filtered when they match -- with the IP address of an entry on the table. -- invalid (5) - If this value is written to the object, the -- corresponding entry will be removed from the table." -- ::= { swL3IpFilterAddrCtrlEntry 2 } -- ******************************************************************** -- swL3IpArpAgingTime OBJECT IDENTIFIER ::= { swL3IpMgmt 4 } -- ******************************************************************** swL3IpArpAgingTime OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The timeout period in minutes for aging out dynamically learned ARP information." ::= { swL3IpMgmt 4 } swL3IpStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's IP static routing table." ::= { swL3IpMgmt 5 } swL3IpStaticRouteEntry OBJECT-TYPE SYNTAX SwL3IpStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, under a particular policy. Once an entry is built, it shouldn't be modified. That is, it just supports a create or delete action." INDEX { swL3IpStaticRouteDest, swL3IpStaticRouteMask, swL3IpStaticRouteBkupState } ::= { swL3IpStaticRouteTable 1 } SwL3IpStaticRouteEntry ::= SEQUENCE { swL3IpStaticRouteDest IpAddress, swL3IpStaticRouteMask IpAddress, swL3IpStaticRouteBkupState INTEGER, swL3IpStaticRouteNextHop IpAddress, swL3IpStaticRouteMetric INTEGER, swL3IpStaticRouteStatus INTEGER } swL3IpStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object will not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object with a value of x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteMask object is not equal to x." ::= { swL3IpStaticRouteEntry 1 } swL3IpStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates that the mask is to be logical-ANDed with the destination address before being compared to the value in the swL3IpStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the swL3IpStaticRouteMask by referring to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to the value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the swL3IpStaticRouteDest object is not equal to swL3IpStaticRouteDest." ::= { swL3IpStaticRouteEntry 2 } swL3IpStaticRouteBkupState OBJECT-TYPE SYNTAX INTEGER { primary(1), backup(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The routing state for this route. The value should be primary (1) or backup (2)." ::= { swL3IpStaticRouteEntry 3 } swL3IpStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "On remote routes, the address of the next system route; Otherwise, 0.0.0.0." ::= { swL3IpStaticRouteEntry 4 } swL3IpStaticRouteMetric OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The routing metric for this route." ::= { swL3IpStaticRouteEntry 5 } swL3IpStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - If this value is written to the object, the corresponding entry will be removed from the table. Valid (3) - This entry will reside in the table." ::= { swL3IpStaticRouteEntry 6 } -- ******************************************************************** -- swL3RelayBootpMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 1 } -- ******************************************************************** swL3RelayBootpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the BOOTP Relay function is enabled or disabled." ::= { swL3RelayBootpMgmt 1 } swL3RelayBootpHopCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum number of router hops that the BOOTP packets can cross." ::= { swL3RelayBootpMgmt 2 } swL3RelayBootpTimeThreshold OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the minimum time in seconds within which the switch must relay the BOOTP request. If this time is exceeded, the switch will drop the BOOTP packet." ::= { swL3RelayBootpMgmt 3 } swL3RelayBootpOption82State OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DHCP relay agent information option 82 function is enabled or disabled." ::= { swL3RelayBootpMgmt 4 } swL3RelayBootpOption82Check OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled." ::= { swL3RelayBootpMgmt 5 } swL3RelayBootpOption82Policy OBJECT-TYPE SYNTAX INTEGER { replace(1), drop(2), keep(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the reforwarding policy of DHCP relay agent information option 82. replace (1) - Replace the existing option 82 field in messages. drop (2) - Discard messages with the existing option 82 field. keep (3) - Retain the existing option 82 field in messages." ::= { swL3RelayBootpMgmt 6 } swL3RelayBootpCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RelayBootpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the IP address as a destination to forward (relay) BOOTP packets to." ::= { swL3RelayBootpMgmt 7 } swL3RelayBootpCtrlEntry OBJECT-TYPE SYNTAX SwL3RelayBootpCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information that specifies the IP address of a destination to forward (relay) BOOTP packets to." INDEX { swL3RelayBootpCtrlInterfaceName, swL3RelayBootpCtrlServer} ::= { swL3RelayBootpCtrlTable 1 } SwL3RelayBootpCtrlEntry ::= SEQUENCE { swL3RelayBootpCtrlInterfaceName DisplayString, swL3RelayBootpCtrlServer IpAddress, swL3RelayBootpCtrlState INTEGER } swL3RelayBootpCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the IP interface." ::= { swL3RelayBootpCtrlEntry 1 } swL3RelayBootpCtrlServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The BOOTP server IP address." ::= { swL3RelayBootpCtrlEntry 2 } swL3RelayBootpCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - If this value is written to the object, the corresponding entry will be removed from the table. valid (3) - This entry will reside in the table." ::= { swL3RelayBootpCtrlEntry 3 } -- ******************************************************************** -- swL3RelayDnsMgmt OBJECT IDENTIFIER ::= { swL3RelayMgmt 2 } -- ******************************************************************** swL3RelayDnsState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DNS Relay function is enabled or disabled." ::= { swL3RelayDnsMgmt 1 } swL3RelayDnsPrimaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the address of the primary DNS server." ::= { swL3RelayDnsMgmt 2 } swL3RelayDnsSecondaryServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the address of the secondary DNS server." ::= { swL3RelayDnsMgmt 3 } swL3RelayDnsCacheState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DNS Relay cache is enabled or disabled." ::= { swL3RelayDnsMgmt 4 } swL3RelayDnsStaticTableState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DNS Relay static table is enabled or disabled." ::= { swL3RelayDnsMgmt 5 } swL3RelayDnsCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RelayDnsCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table display the current DNS relay static table." ::= { swL3RelayDnsMgmt 6 } swL3RelayDnsCtrlEntry OBJECT-TYPE SYNTAX SwL3RelayDnsCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information displaying the current DNS relay static table." INDEX { swL3RelayDnsCtrlDomainName, swL3RelayDnsCtrlIpAddr} ::= { swL3RelayDnsCtrlTable 1 } SwL3RelayDnsCtrlEntry ::= SEQUENCE { swL3RelayDnsCtrlDomainName DisplayString, swL3RelayDnsCtrlIpAddr IpAddress, swL3RelayDnsCtrlState INTEGER } swL3RelayDnsCtrlDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The domain name of this entry." ::= { swL3RelayDnsCtrlEntry 1 } swL3RelayDnsCtrlIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of this entry." ::= { swL3RelayDnsCtrlEntry 2 } swL3RelayDnsCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other (1) - This entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid (2) - If this value is written to the object, the corresponding entry will be removed from the table. valid (3) - This entry will reside in the table." ::= { swL3RelayDnsCtrlEntry 3 } -- ******************************************************************** -- swL3Md5Table OBJECT IDENTIFIER ::= { swL3MgmtMIB 4 } -- ******************************************************************** swL3Md5Table OBJECT-TYPE SYNTAX SEQUENCE OF SwL3Md5Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table display the current MD5 key table." ::= { swL3MgmtMIB 4 } swL3Md5Entry OBJECT-TYPE SYNTAX SwL3Md5Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information displaying the current MD5 key table." INDEX { swL3Md5KeyId} ::= { swL3Md5Table 1 } SwL3Md5Entry ::= SEQUENCE { swL3Md5KeyId INTEGER, swL3Md5Key DisplayString, swL3Md5RowStatus RowStatus } swL3Md5KeyId OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The MD5 key ID." ::= { swL3Md5Entry 1 } swL3Md5Key OBJECT-TYPE SYNTAX DisplayString (SIZE(1..16)) MAX-ACCESS read-create STATUS current DESCRIPTION "An MD5 password of up to 16 bytes." ::= { swL3Md5Entry 2 } swL3Md5RowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3Md5Entry 3 } -- ******************************************************************** -- swL3RouteRedistriTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 5 } -- ******************************************************************** swL3RouteRedistriTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3RouteRedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Route redistribution allows routers on the network that are running different routing protocols to exchange routing information. This is accomplished by comparing the routes stored in the various routers routing tables and assigning appropriate metrics. This information is then exchanged among the various routers according to the individual routers current routing protocol." ::= { swL3MgmtMIB 5 } swL3RouteRedistriEntry OBJECT-TYPE SYNTAX SwL3RouteRedistriEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information displaying the route redistribution table." INDEX { swL3RouteRedistriSrcProtocol, swL3RouteRedistriDstProtocol} ::= { swL3RouteRedistriTable 1 } SwL3RouteRedistriEntry ::= SEQUENCE { swL3RouteRedistriSrcProtocol INTEGER, swL3RouteRedistriDstProtocol INTEGER, swL3RouteRedistriType INTEGER, swL3RouteRedistriMetric INTEGER, swL3RouteRedistriRowStatus RowStatus } swL3RouteRedistriSrcProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), rip(2), ospf(3), static(4), local(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol for the source device." ::= { swL3RouteRedistriEntry 1 } swL3RouteRedistriDstProtocol OBJECT-TYPE SYNTAX INTEGER { other(1), rip(2), ospf(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Allows the selection of the protocol for the destination device." ::= { swL3RouteRedistriEntry 2 } swL3RouteRedistriType OBJECT-TYPE SYNTAX INTEGER { other(1), all(2), type-1(3), type-2(4), internal(5), external(6), inter-E1(7), inter-E2(8), extType1(9), extType2(10) } MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the selection of one of the methods for calculating the metric value." ::= { swL3RouteRedistriEntry 3 } swL3RouteRedistriMetric OBJECT-TYPE SYNTAX INTEGER (0..16777214) MAX-ACCESS read-create STATUS current DESCRIPTION "Allows the entry of an OSPF interface cost. This is analogous to a Hop Count in the RIP routing protocol. The value '0' indicates the default value." ::= { swL3RouteRedistriEntry 4 } swL3RouteRedistriRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL3RouteRedistriEntry 5 } -- ******************************************************************** -- swL3OspfHostTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 6 } -- ******************************************************************** swL3OspfHostTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3OspfHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of hosts and their metrics that the router will advertise as host routes." ::= { swL3MgmtMIB 6 } swL3OspfHostEntry OBJECT-TYPE SYNTAX SwL3OspfHostEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A metric to be advertised, for a given type of service, when a given host is reachable." INDEX { swL3OspfHostIpAddress, swL3OspfHostTOS } ::= { swL3OspfHostTable 1 } SwL3OspfHostEntry ::= SEQUENCE { swL3OspfHostIpAddress IpAddress, swL3OspfHostTOS TOSType, swL3OspfHostMetric Metric, swL3OspfHostAreaID AreaID, swL3OspfHostStatus RowStatus } swL3OspfHostIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the host." ::= { swL3OspfHostEntry 1 } swL3OspfHostTOS OBJECT-TYPE SYNTAX TOSType MAX-ACCESS read-only STATUS current DESCRIPTION "The Type of Service for the route being configured." ::= { swL3OspfHostEntry 2 } swL3OspfHostMetric OBJECT-TYPE SYNTAX Metric MAX-ACCESS read-create STATUS current DESCRIPTION "The metric to be advertised." ::= { swL3OspfHostEntry 3 } swL3OspfHostAreaID OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-create STATUS current DESCRIPTION "The area of the host entry to be found within. By default, this is the area that a subsuming OSPF interface is in, or 0.0.0.0" ::= { swL3OspfHostEntry 4 } swL3OspfHostStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { swL3OspfHostEntry 5 } -- ******************************************************************** -- swL3ospfVirtIfTable OBJECT IDENTIFIER ::= { swL3MgmtMIB 7 } -- ******************************************************************** -- OSPF Virtual Interface Table(from rfc1850,modify by Scott Sung) -- The Virtual Interface Table describes the virtual -- links that the OSPF Process is configured to -- carry on. swL3ospfVirtIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3OspfVirtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about this router's virtual inter- faces." REFERENCE "OSPF Version 2, Appendix C.4 Virtual link parameters" ::= { swL3MgmtMIB 7 } swL3ospfVirtIfEntry OBJECT-TYPE SYNTAX SwL3OspfVirtIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about a single virtual interface." INDEX { swL3ospfVirtIfAreaId, swL3ospfVirtIfNeighbor } ::= { swL3ospfVirtIfTable 1 } SwL3OspfVirtIfEntry ::= SEQUENCE { swL3ospfVirtIfAreaId AreaID, swL3ospfVirtIfNeighbor RouterID, swL3ospfVirtIfTransitDelay UpToMaxAge, swL3ospfVirtIfRetransInterval UpToMaxAge, swL3ospfVirtIfHelloInterval HelloRange, swL3ospfVirtIfRtrDeadInterval PositiveInteger, swL3ospfVirtIfState INTEGER, swL3ospfVirtIfEvents Counter32, swL3ospfVirtIfAuthType INTEGER, swL3ospfVirtIfAuthKey OCTET STRING, swL3ospfVirtIfAuthKeyID INTEGER, swL3ospfVirtIfStatus RowStatus } swL3ospfVirtIfAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-only STATUS current DESCRIPTION "The transit area that the virtual link traverses. By definition, this is not 0.0.0.0" ::= { swL3ospfVirtIfEntry 1 } swL3ospfVirtIfNeighbor OBJECT-TYPE SYNTAX RouterID MAX-ACCESS read-only STATUS current DESCRIPTION "The router ID of the virtual neighbor." ::= { swL3ospfVirtIfEntry 2 } swL3ospfVirtIfTransitDelay OBJECT-TYPE SYNTAX UpToMaxAge MAX-ACCESS read-create STATUS current DESCRIPTION "The estimated number of seconds it takes to transmit a link-state update packet over this interface." DEFVAL { 1 } ::= { swL3ospfVirtIfEntry 3 } swL3ospfVirtIfRetransInterval OBJECT-TYPE SYNTAX UpToMaxAge MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds between link-state advertisement retransmissions for adjacencies belonging to this interface. This value is also used when retransmitting database description and link-state request packets. This value should be well over the expected round-trip time." DEFVAL { 5 } ::= { swL3ospfVirtIfEntry 4 } swL3ospfVirtIfHelloInterval OBJECT-TYPE SYNTAX HelloRange MAX-ACCESS read-create STATUS current DESCRIPTION "The length of time, in seconds, between the hello packets that the router sends on the interface. This value must be the same for the virtual neighbor." DEFVAL { 10 } ::= { swL3ospfVirtIfEntry 5 } swL3ospfVirtIfRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds that a router's hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for the virtual neigh- bor." DEFVAL { 60 } ::= { swL3ospfVirtIfEntry 6 } swL3ospfVirtIfState OBJECT-TYPE SYNTAX INTEGER { down (1), -- these use the same encoding pointToPoint (4) -- as the ospfIfTable } MAX-ACCESS read-only STATUS current DESCRIPTION "OSPF virtual interface states." DEFVAL { down } ::= { swL3ospfVirtIfEntry 7 } swL3ospfVirtIfEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of state changes or error events on this virtual link" ::= { swL3ospfVirtIfEntry 8 } swL3ospfVirtIfAuthType OBJECT-TYPE SYNTAX INTEGER (0..255) -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication type specified for a virtu- al interface. Additional authentication types may be assigned locally." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { swL3ospfVirtIfEntry 9 } swL3ospfVirtIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "If authentication type is simplePassword, the device will left adjust and zero fill to 8 oc- tets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ::= { swL3ospfVirtIfEntry 10 } swL3ospfVirtIfAuthKeyID OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The MD5 key ID." ::= { swL3ospfVirtIfEntry 11 } swL3ospfVirtIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { swL3ospfVirtIfEntry 12 } -- OSPF Interface Table -- The OSPF Interface Table augments the ipAddrTable -- with OSPF specific information. swL3ospfIfTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3OspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF." REFERENCE "OSPF Version 2, Appendix C.3 Router interface parameters" ::= { swL3MgmtMIB 8 } swL3ospfIfEntry OBJECT-TYPE SYNTAX SwL3OspfIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The OSPF interface entry describes one inter- face from the viewpoint of OSPF." INDEX { swL3ospfIfIpAddress, swL3ospfAddressLessIf } ::= { swL3ospfIfTable 1 } SwL3OspfIfEntry ::= SEQUENCE { swL3ospfIfIpAddress IpAddress, swL3ospfAddressLessIf Integer32, swL3ospfIfAreaId AreaID, swL3ospfIfType INTEGER, swL3ospfIfAdminStat Status, swL3ospfIfRtrPriority DesignatedRouterPriority, swL3ospfIfTransitDelay UpToMaxAge, swL3ospfIfRetransInterval UpToMaxAge, swL3ospfIfHelloInterval HelloRange, swL3ospfIfRtrDeadInterval PositiveInteger, swL3ospfIfPollInterval PositiveInteger, swL3ospfIfState INTEGER, swL3ospfIfDesignatedRouter IpAddress, swL3ospfIfBackupDesignatedRouter IpAddress, swL3ospfIfEvents Counter32, swL3ospfIfMulticastForwarding INTEGER, swL3ospfIfDemand TruthValue, swL3ospfIfAuthType INTEGER, swL3ospfIfAuthKey OCTET STRING, swL3ospfIfAuthKeyID INTEGER, swL3ospfIfStatus RowStatus } swL3ospfIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of this OSPF interface." ::= { swL3ospfIfEntry 1 } swL3ospfAddressLessIf OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "For the purpose of easing the instancing of addressed and addressless interfaces; This variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address." ::= { swL3ospfIfEntry 2 } swL3ospfIfAreaId OBJECT-TYPE SYNTAX AreaID MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { swL3ospfIfEntry 3 } swL3ospfIfType OBJECT-TYPE SYNTAX INTEGER { broadcast (1), nbma (2), pointToPoint (3), pointToMultipoint (5) } MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF interface type. By way of default, this field may be intuited from the corresponding value of ifType. Broad- cast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma' and links that are definitively point-to-point take the value 'pointToPoint'." ::= { swL3ospfIfEntry 4 } swL3ospfIfAdminStat OBJECT-TYPE SYNTAX Status MAX-ACCESS read-create STATUS current DESCRIPTION "The OSPF interface's administrative status. The value formed on the interface, and the in- terface will be advertised as an internal route to some areas. The value 'disabled' denotes that the interface is external to OSPF." DEFVAL { enabled } ::= { swL3ospfIfEntry 5 } swL3ospfIfRtrPriority OBJECT-TYPE SYNTAX DesignatedRouterPriority MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of this interface. Used in multi-access networks, this field is used by the designated router election algorithm. The value 0 signifies that the router is not eligi- ble to become the designated router on this particular network. In the event of a tie in this value, routers will use their router ID as a tie breaker." DEFVAL { 1 } ::= { swL3ospfIfEntry 6 } swL3ospfIfTransitDelay OBJECT-TYPE SYNTAX UpToMaxAge MAX-ACCESS read-create STATUS current DESCRIPTION "The estimated number of seconds it takes to transmit a link state update packet over this interface." DEFVAL { 1 } ::= { swL3ospfIfEntry 7 } swL3ospfIfRetransInterval OBJECT-TYPE SYNTAX UpToMaxAge MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds between link-state ad- vertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database descrip- tion and link-state request packets." DEFVAL { 5 } ::= { swL3ospfIfEntry 8 } swL3ospfIfHelloInterval OBJECT-TYPE SYNTAX HelloRange MAX-ACCESS read-create STATUS current DESCRIPTION "The length of time, in seconds, between the hello packets that the router sends on the in- terface. This value must be the same for all routers attached to a common network." DEFVAL { 10 } ::= { swL3ospfIfEntry 9 } swL3ospfIfRtrDeadInterval OBJECT-TYPE SYNTAX PositiveInteger MAX-ACCESS read-create STATUS current DESCRIPTION "The number of seconds that a router's Hello packets have not been seen before it's neigh- bors declare the router down. This should be some multiple of the hello interval. This value must be the same for all routers attached to a common network." DEFVAL { 40 } ::= { swL3ospfIfEntry 10 } swL3ospfIfPollInterval OBJECT-TYPE SYNTAX PositiveInteger MAX-ACCESS read-create STATUS current DESCRIPTION "The larger time interval, in seconds, between the hello packets sent to an inactive non- broadcast multi-access neighbor." DEFVAL { 120 } ::= { swL3ospfIfEntry 11 } swL3ospfIfState OBJECT-TYPE SYNTAX INTEGER { down (1), loopback (2), waiting (3), pointToPoint (4), designatedRouter (5), backupDesignatedRouter (6), otherDesignatedRouter (7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The OSPF interface state." DEFVAL { down } ::= { swL3ospfIfEntry 12 } swL3ospfIfDesignatedRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the designated router." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { swL3ospfIfEntry 13 } swL3ospfIfBackupDesignatedRouter OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the backup designated router." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { swL3ospfIfEntry 14 } swL3ospfIfEvents OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this OSPF interface has changed its state, or when an error has occurred." ::= { swL3ospfIfEntry 15 } swL3ospfIfMulticastForwarding OBJECT-TYPE SYNTAX INTEGER { blocked (1), -- no multicast forwarding multicast (2), -- using multicast address unicast (3) -- to each OSPF neighbor } MAX-ACCESS read-create STATUS current DESCRIPTION "The way multicasts should be forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaning- ful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effective- ly disables all multicast forwarding." DEFVAL { blocked } ::= { swL3ospfIfEntry 16 } swL3ospfIfDemand OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates whether Demand OSPF procedures (hel- lo supression to FULL neighbors and setting the DoNotAge flag on proogated LSAs) should be per- formed on this interface." DEFVAL { false } ::= { swL3ospfIfEntry 17 } swL3ospfIfAuthType OBJECT-TYPE SYNTAX INTEGER (0..255) -- none (0), -- simplePassword (1) -- md5 (2) -- reserved for specification by IANA (> 2) MAX-ACCESS read-create STATUS current DESCRIPTION "The authentication type specified for an in- terface. Additional authentication types may be assigned locally." REFERENCE "OSPF Version 2, Appendix E Authentication" DEFVAL { 0 } -- no authentication, by default ::= { swL3ospfIfEntry 18 } swL3ospfIfAuthKey OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..256)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Authentication Key. If the Area's Author- ization Type is simplePassword, and the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Note that unauthenticated interfaces need no authentication key, and simple password authen- tication cannot use a key of more than 8 oc- tets. Larger keys are useful only with authen- tication mechanisms not specified in this docu- ment. When read, ospfIfAuthKey will always return a zero length Octet String." REFERENCE "OSPF Version 2, Section 9 The Interface Data Structure" DEFVAL { '0000000000000000'H } -- 0.0.0.0.0.0.0.0 ::= { swL3ospfIfEntry 19 } swL3ospfIfAuthKeyID OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The MD5 key ID." ::= { swL3ospfIfEntry 20 } swL3ospfIfStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This variable displays the status of the entry. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { swL3ospfIfEntry 21 } -- ******************************************************************* swL3RoutePreference OBJECT IDENTIFIER ::= { swL3MgmtMIB 9 } -- ******************************************************************* swL3RoutePreferenceRIP OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the RIP route preference." ::= { swL3RoutePreference 1 } swL3RoutePreferenceOSPFIntra OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the OSPF intra route preference." ::= { swL3RoutePreference 2 } swL3RoutePreferenceStatic OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the static route preference." ::= { swL3RoutePreference 3 } swL3RoutePreferenceLocal OBJECT-TYPE SYNTAX INTEGER (0..999) MAX-ACCESS read-only STATUS current DESCRIPTION "Used to read the local route preference." ::= { swL3RoutePreference 4 } swL3RoutePreferenceOSPFInter OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the OSPF inter route preference." ::= { swL3RoutePreference 5 } swL3RoutePreferenceOSPFExtT1 OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the OSPF ExtT1 route preference." ::= { swL3RoutePreference 6 } swL3RoutePreferenceOSPFExtT2 OBJECT-TYPE SYNTAX INTEGER (1..999) MAX-ACCESS read-write STATUS current DESCRIPTION "Used to configure the OSPF ExtT2 route preference." ::= { swL3RoutePreference 7 } -- ******************************************************************** swL3PimMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 11 } swL3PimCbsrInfoMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 1 } swL3pimCbsrBootStrapPeriod OBJECT-TYPE SYNTAX Integer32 (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "At the elected BSR, this is the interval between originating bootstrap messages, and should be equal to 60 seconds." ::= { swL3PimCbsrInfoMgmt 1 } swL3pimCbsrHashMaskLen OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The length (in bits) of the mask to use in the hash function. For IPv4 we recommend a value of 30. For IPv6 we recommand a value of 126." ::= { swL3PimCbsrInfoMgmt 2 } swL3pimCbsrTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3pimCbsrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM CBSR Table contains the CBSR related information, like interface and priority." ::= { swL3PimCbsrInfoMgmt 3 } swL3pimCbsrEntry OBJECT-TYPE SYNTAX SwL3pimCbsrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PIM CBSR Table." INDEX { swL3pimCbsrInterface } ::= { swL3pimCbsrTable 1 } SwL3pimCbsrEntry ::= SEQUENCE { swL3pimCbsrInterface InterfaceIndex, swL3pimCbsrPriority Integer32 } swL3pimCbsrInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { swL3pimCbsrEntry 1 } swL3pimCbsrPriority OBJECT-TYPE SYNTAX Integer32 (-1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The preference value for the local interface as a candidate bootstrap router. The value of -1 is used to indicate that the local interface is not a candidate BSR interface." DEFVAL { 0 } ::= { swL3pimCbsrEntry 2 } swL3pimCandidateRPMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 2 } swL3pimCandidateRPHoldtime OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "For C-RPs, this is the holdtime specified in the C-RP-Adv message, and is used by the BSR to time out RPs. This should be set to 2.5 * [C-RP-Adv-Period]. Default: 150 seconds." ::= { swL3pimCandidateRPMgmt 1 } swL3pimCandidateRPPriority OBJECT-TYPE SYNTAX Integer32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The 'priority' of the included RP, for the corresponding Encoded-Group Address (if any). The highest priority is '0' (i.e. the lower the value of the 'Priority' field, the higher the priority). This field is stored at the BSR upon receipt, along with the RP address and corresponding Encoded-Group Address." ::= { swL3pimCandidateRPMgmt 2 } swL3pimCandidateRPWildcardPrefixCnt OBJECT-TYPE SYNTAX Integer32 (0..1) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of encoded group addresses included in the message; indicating the group prefixes for which the C-RP is advertising. A Prefix-Cnt of '0' implies a prefix of 224.0.0.0 with a mask length of 4; i.e. all multicast groups. If the C-RP is not configured with Group-prefix information, the C-RP puts a default value of '0' in this field." ::= { swL3pimCandidateRPMgmt 3 } swL3pimSptMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 3 } swL3pimLastHopSptThreshold OBJECT-TYPE SYNTAX DisplayString(SIZE(1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies a last hop router threshold." ::= { swL3pimSptMgmt 1 } swL3pimRPSptThreshold OBJECT-TYPE SYNTAX DisplayString(SIZE(1..8)) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies an RP threshold." ::= { swL3pimSptMgmt 2 } swL3pimRegChksumIncDataTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3pimRegChksumIncDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM Register Checksum Including Data Table contains the PIM register checksum including data information, like RP address and state." ::= { swL3PimMgmt 4 } swL3pimRegChksumIncDataEntry OBJECT-TYPE SYNTAX SwL3pimRegChksumIncDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PIM Register Checksum Including the Data Table." INDEX { swL3SwL3pimRegChksumIncDataRpAddr } ::= { swL3pimRegChksumIncDataTable 1 } SwL3pimRegChksumIncDataEntry ::= SEQUENCE { swL3SwL3pimRegChksumIncDataRpAddr IpAddress, swL3SwL3pimRegChksumIncDataState RowStatus } swL3SwL3pimRegChksumIncDataRpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the RP address." ::= { swL3pimRegChksumIncDataEntry 1 } swL3SwL3pimRegChksumIncDataState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The state of register checksum including the data for RPs." ::= { swL3pimRegChksumIncDataEntry 2 } swL3PimInfoMgmt OBJECT IDENTIFIER ::= { swL3PimMgmt 5 } swL3pimRegisterProbeTime OBJECT-TYPE SYNTAX Integer32 (1..127) MAX-ACCESS read-write STATUS current DESCRIPTION "When null registers are used, this is the time between sending a null register and the register-suppression-timer expiring unless it is restarted by receiving a register-stop. Thus, a null register would be sent when the register-suppression-timer reaches this value. Default: 5 seconds." ::= { swL3PimInfoMgmt 1 } swL3pimRegisterSuppressionTime OBJECT-TYPE SYNTAX Integer32 (3..255) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the mean interval between receiving a register-stop and allowing registers to be sent again. A lower value means more frequent register bursts at RP, while a higher value means longer join latency for the new receiver. Default: 60 seconds." ::= { swL3PimInfoMgmt 2 } swL3pimInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3pimInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM Information Table contains PIM related information, like DR priority." ::= { swL3PimInfoMgmt 3 } swL3pimInfoEntry OBJECT-TYPE SYNTAX SwL3pimInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PIM Information Table." INDEX { swL3pimInterface } ::= { swL3pimInfoTable 1 } SwL3pimInfoEntry ::= SEQUENCE { swL3pimInterface InterfaceIndex, swL3pimDRPriority Unsigned32 } swL3pimInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value of this PIM interface." ::= { swL3pimInfoEntry 1 } swL3pimDRPriority OBJECT-TYPE SYNTAX Unsigned32 (0..4294967294) MAX-ACCESS read-write STATUS current DESCRIPTION "The DR Priority is a 32-bit unsigned number and the numerically larger priority is always prefered. A router's idea of the current DR on an interface can change when a PIM hello message is received, when a neighbor times out, or when a router's own DR priority changes." -- DEFVAL { 0 } ::= { swL3pimInfoEntry 2 } -- The PIM Static-RP Table swL3pimStaticRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3pimStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM Static RP Table contains the PIM static RP related information, like group address, group mask, RP address and RP row status." ::= { swL3PimMgmt 6 } swL3pimStaticRPEntry OBJECT-TYPE SYNTAX SwL3pimStaticRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the PIM Static RP Table." INDEX { swL3pimStaticRPGroupAddress, swL3pimStaticRPGroupMask, swL3pimStaticRPAddress } ::= { swL3pimStaticRPTable 1 } SwL3pimStaticRPEntry ::= SEQUENCE { swL3pimStaticRPGroupAddress IpAddress, swL3pimStaticRPGroupMask IpAddress, swL3pimStaticRPAddress IpAddress, swL3pimStaticRPRowStatus RowStatus } swL3pimStaticRPGroupAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address which, when combined with swL3pimStaticRPGroupMask, identifies a group prefix for which the local router will advertise itself as a static RP." ::= { swL3pimStaticRPEntry 1 } swL3pimStaticRPGroupMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The multicast group address mask which, when combined with swL3pimStaticRPGroupAddress, identifies a group prefix for which the local router will advertise itself as a static RP." ::= { swL3pimStaticRPEntry 2 } swL3pimStaticRPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The (unicast) address of the interface which will be advertised as a static RP." ::= { swL3pimStaticRPEntry 3 } swL3pimStaticRPRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this row. New entries may be created or old entries deleted from this table." ::= { swL3pimStaticRPEntry 4 } -- The PIM Active-RP Table swL3pimActiveRPTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL3pimActiveRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PIM Active RP Table contains the PIM active RP related information, like group address, RP address." ::= { swL3PimMgmt 7 } swL3pimActiveRPEntry OBJECT-TYPE SYNTAX SwL3pimActiveRPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the swL3pimActiveRPTable." INDEX { swL3pimActiveRPGroupAddress } ::= { swL3pimActiveRPTable 1 } SwL3pimActiveRPEntry ::= SEQUENCE { swL3pimActiveRPGroupAddress IpAddress, swL3pimActiveRPSourceIPAddress IpAddress, swL3pimActiveRPSourceIPMask IpAddress, swL3pimActiveRPAddress IpAddress } swL3pimActiveRPGroupAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP multicast group address for which this entry contains information about the Active-RP." ::= { swL3pimActiveRPEntry 1 } swL3pimActiveRPSourceIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP address for which this entry contains information about the source of multicast data." ::= { swL3pimActiveRPEntry 2 } swL3pimActiveRPSourceIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The IP mask for which this entry contains information about the source of multicast data." ::= { swL3pimActiveRPEntry 3 } swL3pimActiveRPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the Active-RP." ::= { swL3pimActiveRPEntry 4 } -- ******************************************************************** -- swL3OspfDefaultInfoOriginate OBJECT IDENTIFIER ::= { swL3MgmtMIB 12 } -- ******************************************************************** swL3OspfDefaultInfoOriginate OBJECT IDENTIFIER ::= { swL3MgmtMIB 12 } swL3OspfDefaultInfoOriginateState OBJECT-TYPE SYNTAX Status MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the Default Info Originate is enabled or disabled." ::= { swL3OspfDefaultInfoOriginate 1 } swL3OspfDefaultInfoOriginateAlways OBJECT-TYPE SYNTAX Status MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the always parameter is enabled or disabled. If 'swL3OspfDefaultInfoOriginateState' is disabled, this object returns to the default setting." ::= { swL3OspfDefaultInfoOriginate 2 } swL3OspfDefaultInfoOriginateMettype OBJECT-TYPE SYNTAX INTEGER { type1(1), type2(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of AS external route. If 'swL3OspfDefaultInfoOriginateState' is disabled, this object returns to the default setting." ::= { swL3OspfDefaultInfoOriginate 3 } swL3OspfDefaultInfoOriginateMetric OBJECT-TYPE SYNTAX INTEGER (0..16777214) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the cost of a default route to be advertised in OSPF. The range is 0 to 16777214." ::= { swL3OspfDefaultInfoOriginate 4 } -- ******************************************************************** -- swL3TraceRouteMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 13 } -- ******************************************************************** swL3TraceRouteMgmt OBJECT IDENTIFIER ::= { swL3MgmtMIB 13 } swL3TraceRouteCtrl OBJECT IDENTIFIER ::= { swL3TraceRouteMgmt 1 } swL3TraceRoutePKTToCPUState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates to control whether to capture IP packet with zero TTL to CPU." ::= { swL3TraceRouteCtrl 1 } END