-- ----------------------------------------------------------------------------- -- DES3528DC-L2MGMT-MIB -- ----------------------------------------------------------------------------- -- -- Version 0.23, 2008/10/08, Moun Lu -- [Modification] -- [1]To add the object "swL2PPPoECirIDinsertState". -- Notes: Requested by D-Link, DES3500 -- -- ----------------------------------------------------------------------------- -- Version 2.24 -- 2008/12/1 -- Requset By Rick Ou for project DGS3700 -- [New Object] -- move swL2SubnetVLANTable to SubnetVLAN.mib -- move swL2VlanPrecedenceTable to SubnetVLAN.mib -- add swL2NniGvrpBpduAddress -- ------------------------------------------------------------------------------ -- Version 2.19,2008/08/13,Green Zhu,Synchronize from L2mgmtDes30xxp -- add swL2IGMPAccessAuthTable -- add swL2TrunkVLANTable -- add swL2DevCtrlVLANTrunkState -- ----------------------------------------------------------------------------- -- Version 2.15 -- 2008/10/17 -- Request By Peterson zhou for project DGS32XXR1.3 -- Add swL2DhcpLocalRelayState -- Add swL2DhcpLocalRelayVLANTable -- ----------------------------------------------------------------------------- -- Version 2.08 -- 2008/06/02 -- Request By Kelvin Tao for project DGS3700 -- [New Object] -- 1. add swL2DevCtrlCFM -- ----------------------------------------------------------------------------- -- Version 2.05 -- 2007/06/05 -- Request By Jenny Zeng for project DES3400 -- [New Object] -- (a)add swL2IGMPMulticastVlanTagMemberPort, swL2IGMPMulticastVlanState and -- swL2IGMPMulticastVlanReplaceSourceIp in table swL2IGMPMulticastVlanTable -- (b)add swL2IGMPMulticastVlanGroupTable -- (c)add swL2MulticastFilterMode, swL2MulticastFilterModeVlanTable and swL2MulticastFilterModePortTable -- (d)add swL2MulticastFilterProfileTable, swL2MulticastFilterProfileAddressTable,swL2LimitedMulticastFilterPortTable and -- swL2MulticastFilterPortMaxGroupTable -- -- [Modification] -- (a)remove swL2LimitedMulticastTable and swL2LimitedMulticastResetPort -- -- Version 2.04 -- 2007/05/22 -- Request By Jenny Zeng for project DES3400 -- (a)add swL2DevCtrlWeb, swL2DevCtrlWebState, swL2DevCtrlWebTcpPort -- (b)add swL2TrunkLACPPortTable -- (c)add swL2DevCtrlSnmpTrapState -- (d)add swL2PortCounterCtrlTable -- (e)add swL2PortErrTable -- (f)add swL2PortSecurityEntryClearCtrl in table swL2PortSecurityControlTable -- (g)add swL2DevCtrlIGMPSnoopingMcstRTOnly -- -- ----------------------------------------------------------------------------- -- Version 2.03 -- 2006/10/26 -- add swL2VLANMgmt for new feature request(Leander Chang): -- advertisement control of VALN -- ----------------------------------------------------------------------------- -- Version 2.02 -- 2006/10/16 (reported from Yan Zhang/CD/CN/Alphanetworks) -- add object swL2StpForwardBPDU, swL2StpLbd, swL2StpLbdRecoverTime. -- add table swL2StpPortTable, swL2CosPriorityTable, swL2CosPortPRITable, swL2CosMacBasePRITable -- for implement trap/log in mac notify and stp loop. -- ----------------------------------------------------------------------------- -- Version 2.01 -- 2006/7/7 -- added object swL2LimitedMulticastResetPort -- ----------------------------------------------------------------------------- -- Version 2.00 -- 2006/6/30 -- rearrange the MIB that base on PX and DES3526. -- ----------------------------------------------------------------------------- -- Version 1.3 -- 2005/12/27 -- added object swL2PortCtrlJumboFrameMaxSize -- ----------------------------------------------------------------------------- -- Version 1.2 -- 2005/11/11 11:36 -- for implement trap/log in port security violation. -- add object swL2PortSecurityTrapLogState, swL2PortSecurityViolationMac ,swL2PortSecurityViolationTrap -- ----------------------------------------------------------------------------- -- Version 1.1 -- 2005/9/12 10:04 -- add swL2PortInfoMediumType in swL2PortInfoTable and -- add swL2PortCtrlMediumType in swL2PortCtrlTable -- add swL2PortCtrlJumboFrame -- ----------------------------------------------------------------------------- -- Version 1.02 -- 2005/4/8 04:31PM -- By Scott Slong -- Add swL2DevCtrlManagementVlanId -- ----------------------------------------------------------------------------- -- Version 1.01 -- 2004/9/21 04:31PM -- By Karen Huang -- Add swL2PortCableDiagnosisTable -- ----------------------------------------------------------------------------- -- Version 1.00 -- Remove swDevInfoSystemUptime, swDevInfoConsoleInuse,swL2DevCtrlUpDownloadState,swDevInfoSaveCfg -- Remove swL2DevCtrlUpDownloadImageFileName ,swL2DevCtrlUpDownloadImageSourceAddr -- Remove swL2DevCtrlUpDownloadImage , swL2DevCtrlSaveCfg -- ----------------------------------------------------------------------------- -- Version 0.02 -- 2002/07/30 -- By Tommy Wang -- Renamed to DXxxxxx-MIB -- Add swL2TrafficMgmt -- Modified swL2DevCtrl -- Removed swL2PortStTable -- Removed swL2PortCtrlEntry->swL2PortCtrlBackPressState and -- swL2PortCtrlBMStromthreshold -- Modified swL2MirrorMgmt -- Removed swL2FilterAddrVid -- Modified swL2IGMPCtrlTable -- Removed swL2PriorityMgmt -- Modified swL2TrunkMasterPortIndex MAX-ACCESS read-only to read-write -- Add swL2IGMPCtrState for invalid(4) -- Modified swL2PortInfoType -- Removed swDevInfoFrontPanelLedStatus about RPS and modified its SIZE -- -- ----------------------------------------------------------------------------- -- Version 0.01 -- 2000/07/03 -- By Chrissy Chen -- Removed swL2PortTxPrioQueueCtrlTable -- Modified swL2PortCtrlBMStromPercentage to swL2PortCtrlBMStromthreshold -- -- ----------------------------------------------------------------------------- DES3528DC-L2MGMT-MIB DEFINITIONS ::= BEGIN IMPORTS IpAddress , TimeTicks , Integer32, Unsigned32, MODULE-IDENTITY , OBJECT-TYPE FROM SNMPv2-SMI DisplayString,RowStatus,TruthValue FROM SNMPv2-TC --PortList FROM Q-BRIDGE-MIB AgentNotifyLevel FROM DLINK-ID-REC-MIB des3528dc FROM SW3528PRIMGMT-MIB; swL2MgmtMIB MODULE-IDENTITY LAST-UPDATED "0812010000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "The Structure of Layer 2 Network Management Information." ::= { des3528dc 2 } MacAddress ::= OCTET STRING (SIZE (6)) -- a 6 octet address -- in the -- "canonical" -- order, copy from RFC1493 VlanId ::= INTEGER (1..4094) PortList ::= OCTET STRING(SIZE (0..127)) swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } -- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } swL2MirrorMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } -- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 13 } swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } -- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 } -- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 } swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 } swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 } swL2PPPoEMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 25 } swL2MgmtMIBTraps OBJECT IDENTIFIER ::= { swL2MgmtMIB 100 } -- ----------------------------------------------------------------------------- -- swL2DevMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 1 } -- ----------------------------------------------------------------------------- swL2DevInfo OBJECT IDENTIFIER ::= { swL2DevMgmt 1 } swDevInfoTotalNumOfPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports within this switch. This value is the sum of the ports within this switch." ::= { swL2DevInfo 1 } swDevInfoNumOfPortInUse OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports in this switch connected to the segment or the end stations." ::= { swL2DevInfo 2 } swDevInfoFrontPanelLedStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..127)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object is a set of system LED indications. The first five octets are defined as system LED. The first two octets are currently unused and must be set to zero. The third octet indicates the power LED. The fourth octet indicates the console LED. The fifth LED is RPS (Redundancy Power Supply) LED. The other octets are the logical port LED. Every two bytes are presented to a port. The first byte is presented as the Link/Activity LED. The second byte is presented as the Speed LED. System LED: 01 = fail/error/non existence. 02 = work normal Link/Activity LED : The most significant bit is used for blink/solid: 8 = The LED blinks. The second most significant bit is used for link status: 1 = link fail. 2 = link pass. Speed LED : 01 = 10Mbps. 02 = 100Mbps. 03 = 1000Mbps. The four remaining bits are currently unused and must be 0." ::= { swL2DevInfo 4 } -- ----------------------------------------------------------------------------- swL2DevCtrl OBJECT IDENTIFIER ::= { swL2DevMgmt 2 } swL2DevCtrlStpState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable the spanning tree algorithm during the runtime of the system." ::= { swL2DevCtrl 1 } swL2DevCtrlIGMPSnooping OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled." ::= { swL2DevCtrl 2 } swL2DevCtrlIGMPSnoopingMcstRTOnly OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls IGMP snooping forward multicast routing only state." ::= { swL2DevCtrl 3 } -- swL2DevCtrlRmonState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object can enable or disable RMON." -- ::= { swL2DevCtrl 4 } swL2DevCtrlSnmpTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the SNMP trap status." ::= { swL2DevCtrl 5 } swL2DevCtrlCleanAllStatisticCounter OBJECT-TYPE SYNTAX INTEGER { normal(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the object is set to active, all statistical counters will be cleared. If set to normal, no action." ::= { swL2DevCtrl 6 } swL2DevCtrlVlanIdOfFDBTbl OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the VLAN ID to which the Dot1dTpFdbTable belongs; The default value is DEFAULT-VLAN-ID of the system." ::= { swL2DevCtrl 7 } swL2MACNotifyState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object can enable or disable MAC Notification." ::= { swL2DevCtrl 8 } swL2MACNotifyHistorySize OBJECT-TYPE SYNTAX INTEGER (1..500) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the history size of MAC addresses in the MAC Address table. The default value is 1 ." ::= { swL2DevCtrl 9 } swL2MACNotifyInterval OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the time interval, in seconds, which will trigger MAC notification messages." ::= { swL2DevCtrl 10 } swL2DevCtrlAsymVlanState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables asymmetric VLANs during the runtime of the system." ::= { swL2DevCtrl 13 } -- ----------------------------------------------------------------------------- swL2DevCtrlTelnet OBJECT IDENTIFIER ::= { swL2DevCtrl 14 } swL2DevCtrlTelnetState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Telnet status." ::= { swL2DevCtrlTelnet 1 } swL2DevCtrlTelnetTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object designates TCP ports. When Telnet is disabled, this object is not accessible." ::= { swL2DevCtrlTelnet 2 } -- ----------------------------------------------------------------------------- swL2DevCtrlManagementVlanId OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls which previously created VLANs are included in the System IP Interface." ::= { swL2DevCtrl 16 } -- ----------------------------------------------------------------------------- swL2DevCtrlWeb OBJECT IDENTIFIER ::= { swL2DevCtrl 17 } swL2DevCtrlWebState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the Web status." ::= { swL2DevCtrlWeb 1 } swL2DevCtrlWebTcpPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object designates TCP ports. When Web is disabled, this object is not accessible." ::= { swL2DevCtrlWeb 2 } swL2DevCtrlLLDPState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the state of the LLDP function. When this function is enabled, the switch can start to transmit LLDP packets and receive and process the LLDP packets. The specific function of each port will depend on the per port LLDP setting. For the advertisement of LLDP packets, the switch announces the information to its neighbor through ports. For the receiving of LLDP packets, the switch will learn the information from the LLDP packets advertised from the neighbor in the neighbor table. " ::= { swL2DevCtrl 18 } swL2DevCtrlLLDPForwardMessageState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When lldp is disabled and lldp forward-message is enabled, the received LLDP Data Unit packets will be forwarded. " DEFVAL {disabled} ::={swL2DevCtrl 19} swL2DevCtrlIpAutoconfig OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the IP auto configuration state." ::= { swL2DevCtrl 20 } -- ----------------------------------------------------------------------------- swL2DevCtrlCFM OBJECT IDENTIFIER ::= { swL2DevCtrl 21 } swL2DevCtrlCFMState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM global state." ::={swL2DevCtrlCFM 1} swL2DevCtrlCFMPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DevCtrlCFMPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing CFM state of speicified ports." ::= { swL2DevCtrlCFM 2 } swL2DevCtrlCFMPortEntry OBJECT-TYPE SYNTAX SwL2DevCtrlCFMPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of CFM state on speicified ports." INDEX { swL2DevCtrlCFMPortIndex } ::= { swL2DevCtrlCFMPortTable 1 } SwL2DevCtrlCFMPortEntry ::= SEQUENCE { swL2DevCtrlCFMPortIndex INTEGER, swL2DevCtrlCFMPortState INTEGER } swL2DevCtrlCFMPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the port-num." ::= { swL2DevCtrlCFMPortEntry 1 } swL2DevCtrlCFMPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the CFM state on per-port." ::= { swL2DevCtrlCFMPortEntry 2 } -- ----------------------------------------------------------------------------- swL2DevCtrlVLANTrunkState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This indicates the global state of the VLAN trunking feature of the device." ::={swL2DevCtrl 22} -- ----------------------------------------------------------------------------- swL2DevAlarm OBJECT IDENTIFIER ::= { swL2DevMgmt 3 } swL2DevAlarmNewRoot OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When the device has become the new root of the Spanning Tree, this object decides whether to send a new root trap." ::= { swL2DevAlarm 1 } swL2DevAlarmTopologyChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether or not to send a trap message when the switch topology changes. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port transition, the device does not send the trap if this object value is disabled or other." ::= { swL2DevAlarm 2 } swL2DevAlarmLinkChange OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object determines whether or not to send a trap message when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device does not send the trap if this object value is disabled or other." ::= { swL2DevAlarm 3 } -- ----------------------------------------------------------------------------- -- swL2VLANMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 2 } -- ----------------------------------------------------------------------------- swL2VlanStaticTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing static configuration information for each VLAN configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { swL2VLANMgmt 1 } swL2VlanStaticEntry OBJECT-TYPE SYNTAX SwL2VlanStaticEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Static information for a VLAN configured into the device by (local or network) management." INDEX { swL2VlanIndex } ::= { swL2VlanStaticTable 1 } SwL2VlanStaticEntry ::= SEQUENCE { swL2VlanIndex VlanId, swL2VLANAdvertisement INTEGER } swL2VlanIndex OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN-ID or other identifier referring to this VLAN." ::= { swL2VlanStaticEntry 1 } swL2VLANAdvertisement OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the advertisement is active or not." ::= { swL2VlanStaticEntry 2 } swL2PVIDAutoAssignmentState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the PVID auto assigment state. If 'Auto-assign PVID' is disabled, PVID can only be changed by PVID configuration (user changes explicitly). The VLAN configuration will not automatically change the PVID. If 'Auto-assign PVID' is enabled, the PVID will be changed by PVID or VLAN configuration. When a user configures a port to VLAN X's untagged membership, this port's PVID will be updated with VLAN X. Using the VLAN list command, PVID is updated as the last item of the VLAN list. When a user removes a port from the untagged membership of the PVID's VLAN, the port's PVID will be assigned 'default VLAN'." ::= { swL2VLANMgmt 2 } swL2VlanPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2VlanPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing vlan and port role information of each port." ::= { swL2VLANMgmt 3 } swL2VlanPortInfoEntry OBJECT-TYPE SYNTAX SwL2VlanPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table entry of vlan port information." INDEX { swL2VlanPortInfoPortIndex,swL2VlanPortInfoVid } ::= { swL2VlanPortInfoTable 1 } SwL2VlanPortInfoEntry ::= SEQUENCE { swL2VlanPortInfoPortIndex INTEGER, swL2VlanPortInfoVid INTEGER, swL2VlanPortInfoPortRole INTEGER } swL2VlanPortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port index." ::= { swL2VlanPortInfoEntry 1 } swL2VlanPortInfoVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN-ID assigned to a special port" ::= { swL2VlanPortInfoEntry 2 } swL2VlanPortInfoPortRole OBJECT-TYPE SYNTAX INTEGER { none(1), untagged(2), tagged(3), dynamic(4), forbidden(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The port role of a special port.when none,it means this port is not belong to the vlan." ::= { swL2VlanPortInfoEntry 3 } swL2NniGvrpBpduAddress OBJECT-TYPE SYNTAX INTEGER { dot1d(1), dot1ad(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the GVRP's BPDU MAC address of NNI port In Q-in-Q status." ::= { swL2VLANMgmt 6 } -- ----------------------------------------------------------------------------- -- swL2PortMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 3 } -- ----------------------------------------------------------------------------- swL2PortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains information about every port." ::= { swL2PortMgmt 1 } swL2PortInfoEntry OBJECT-TYPE SYNTAX SwL2PortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information for each port of the device." INDEX { swL2PortInfoPortIndex,swL2PortInfoMediumType } ::= { swL2PortInfoTable 1 } SwL2PortInfoEntry ::= SEQUENCE { swL2PortInfoPortIndex INTEGER, swL2PortInfoMediumType INTEGER, swL2PortInfoUnitID INTEGER, swL2PortInfoType INTEGER, swL2PortInfoLinkStatus INTEGER, swL2PortInfoNwayStatus INTEGER, -- swL2PortInfoModuleType -- INTEGER, swL2PortInfoErrorDisabled INTEGER } swL2PortInfoPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortInfoEntry 1 } swL2PortInfoMediumType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates medium type of the port number." ::={swL2PortInfoEntry 2} swL2PortInfoUnitID OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates ID of the unit in the system" ::= { swL2PortInfoEntry 3 } swL2PortInfoType OBJECT-TYPE SYNTAX INTEGER { portType-none(0), portType-100Base-T(2), portType-100Base-X(3), portType-1000Base-T(4), portType-1000Base-X(5), portType-10GBase-R(6), portType-10GBase-CX4(7), portType-SIO(8), portType-module-empty(9), portType-user-last(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the connector type of this port." ::= { swL2PortInfoEntry 4 } swL2PortInfoLinkStatus OBJECT-TYPE SYNTAX INTEGER { other(1), link-pass(2), link-fail(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port link status." ::= { swL2PortInfoEntry 5 } swL2PortInfoNwayStatus OBJECT-TYPE SYNTAX INTEGER { link-down(0), full-10Mbps-8023x(1), full-10Mbps-none(2), half-10Mbps-backp(3), half-10Mbps-none(4), full-100Mbps-8023x(5), full-100Mbps-none(6), half-100Mbps-backp(7), half-100Mbps-none(8), full-1Gigabps-8023x(9), full-1Gigabps-none(10), half-1Gigabps-backp(11), half-1Gigabps-none(12), full-10Gigabps-8023x(13), full-10Gigabps-none(14), half-10Gigabps-8023x(15), half-10Gigabps-none(16), empty(17), err-disabled(18) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port speed and duplex mode." ::= { swL2PortInfoEntry 6 } -- swL2PortInfoModuleType OBJECT-TYPE -- SYNTAX INTEGER { -- none(0), -- moduleType-COMBO(1), -- moduleType-1394(2), -- moduleType-1000T(3), -- moduleType-MGBIC(4), -- moduleType-1P-SC-SX(5), -- moduleType-2P-SC-SX(6), -- moduleType-1P-SC-LX(7), -- moduleType-2P-SC-LX(8), -- moduleType-1P-TX(9), -- moduleType-2P-TX(10), -- moduleType-1P-MTRJ-SX(11), -- moduleType-2P-MTRJ-SX(12), -- moduleType-1P-MTRJ-LX(13), -- moduleType-2P-MTRJ-LX(14), -- moduleType-1P-GBIC(15), -- moduleType-2P-GBIC(16), -- moduleType-1P-GBIC-1P-TX(17), -- moduleType-1P-GBIC-1P-STACK(18), -- moduleType-2P-STACK(19), -- moduleType-2P-100FX(20), -- moduleType-1P-100FX(21), -- moduleType-2P-100FX-NEW(22), -- moduleType-1P-100FL(23), -- moduleType-2P-100FL(24), -- moduleType-2P-100TX(25), -- moduleType-BaseModule-24PORT(26) -- } -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the module type of this port." -- ::= { swL2PortInfoEntry 7 } swL2PortInfoErrorDisabled OBJECT-TYPE SYNTAX INTEGER { none(0), storm(1), -- stp-lbd(2), unknow(3), ctp-lbd(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the blocking type of this port." ::= { swL2PortInfoEntry 8 } -- ----------------------------------------------------------------------------- swL2PortCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains control information about every port." ::= { swL2PortMgmt 2 } swL2PortCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of control information for each port on the device." INDEX { swL2PortCtrlPortIndex,swL2PortCtrlMediumType} ::= { swL2PortCtrlTable 1 } SwL2PortCtrlEntry ::= SEQUENCE { swL2PortCtrlPortIndex INTEGER, swL2PortCtrlMediumType INTEGER, swL2PortCtrlUnitIndex INTEGER, swL2PortCtrlAdminState INTEGER, swL2PortCtrlNwayState INTEGER, swL2PortCtrlFlowCtrlState INTEGER, swL2PortCtrlLearningState INTEGER, swL2PortCtrlMACNotifyState INTEGER, -- swL2PortCtrlMulticastfilter -- INTEGER swL2PortCtrlMDIXState INTEGER } swL2PortCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCtrlEntry 1 } swL2PortCtrlMediumType OBJECT-TYPE SYNTAX INTEGER{ copper(1), fiber(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the medium type of the port number." ::={ swL2PortCtrlEntry 2 } swL2PortCtrlUnitIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ID of the unit in the device" ::= { swL2PortCtrlEntry 3 } swL2PortCtrlAdminState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the port is enabled or disabled." ::= { swL2PortCtrlEntry 4 } swL2PortCtrlNwayState OBJECT-TYPE SYNTAX INTEGER { other(1), nway-enabled(2), nway-disabled-10Mbps-Half(3), nway-disabled-10Mbps-Full(4), nway-disabled-100Mbps-Half(5), nway-disabled-100Mbps-Full(6), nway-disabled-1Gigabps-Half(7), nway-disabled-1Gigabps-Full(8), nway-disabled-1Gigabps-Full-master(9), nway-disabled-1Gigabps-Full-slave(10) } MAX-ACCESS read-write STATUS current DESCRIPTION "Chose the port speed, duplex mode, and N-Way function mode." ::= { swL2PortCtrlEntry 5 } swL2PortCtrlFlowCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, the IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames." ::= { swL2PortCtrlEntry 6 } swL2PortCtrlLearningState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the port is locked or not." ::= { swL2PortCtrlEntry 7 } swL2PortCtrlMACNotifyState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets each port's MAC notification state." ::= { swL2PortCtrlEntry 8 } -- swL2PortCtrlMulticastfilter OBJECT-TYPE -- SYNTAX INTEGER { -- other(0), -- forward-all-groups(1), -- forward-unregistered-groups(2), -- filter-unregistered-groups(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object controls the multicast port filtering mode for a specified port. " -- ::= { swL2PortCtrlEntry 9 } swL2PortCtrlMDIXState OBJECT-TYPE SYNTAX INTEGER { auto(1), normal(2), cross(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the MDIX setting of the port." ::= { swL2PortCtrlEntry 10 } swL2PortCtrlJumboFrame OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures the switch's jumbo frame settings." ::= { swL2PortMgmt 3 } swL2PortCtrlJumboFrameMaxSize OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes how many bytes the max jumbo frame is." ::= { swL2PortMgmt 4 } swL2PortCableDiagnosisTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCableDiagnosisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains cable diagnostic information about every port." ::= { swL2PortMgmt 5 } swL2PortCableDiagnosisEntry OBJECT-TYPE SYNTAX SwL2PortCableDiagnosisEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of cable diagnostic information for each port of the device." INDEX { swL2PortCableDiagnosisPortIndex, swL2PortCableDiagnosisPairIndex } ::= { swL2PortCableDiagnosisTable 1 } SwL2PortCableDiagnosisEntry ::= SEQUENCE { swL2PortCableDiagnosisPortIndex INTEGER, swL2PortCableDiagnosisPairIndex INTEGER, swL2PortCableDiagnosisCableStatus INTEGER, swL2PortCableDiagnosisPairStatus INTEGER, swL2PortCableDiagnosisPairLength INTEGER, swL2PortCableDiagnosisPairLengthInaccuracy INTEGER } swL2PortCableDiagnosisPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCableDiagnosisEntry 1 } swL2PortCableDiagnosisPairIndex OBJECT-TYPE SYNTAX INTEGER (1..4) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates pair index of the port. The pair 1 means the pin 3 and 6 of the connector. The pair 2 means the pin 1 and 2 of the connector. The pair 3 means the pin 7 and 8 of the connector. The pair 4 means the pin 4 and 5 of the connector." ::= { swL2PortCableDiagnosisEntry 2 } swL2PortCableDiagnosisCableStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), open(1), short(2), open-short(3), not-support(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the cable status." ::= { swL2PortCableDiagnosisEntry 3 } swL2PortCableDiagnosisPairStatus OBJECT-TYPE SYNTAX INTEGER { ok(0), open(1), short(2), fail(3), not-supported(4), unknown(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the status of the pair." ::= { swL2PortCableDiagnosisEntry 4 } swL2PortCableDiagnosisPairLength OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the approx. length or length to failure of the pair. The unit value is in meters." ::= { swL2PortCableDiagnosisEntry 5 } swL2PortCableDiagnosisPairLengthInaccuracy OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the inaccuracy of a pair length. The unit value is in meters." ::= { swL2PortCableDiagnosisEntry 6 } -- ----------------------------------------------------------------------------- -- swL2PortCounterCtrlTable -- ----------------------------------------------------------------------------- swL2PortCounterCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortCounterCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that used to clear counter information about every port." ::= { swL2PortMgmt 6 } swL2PortCounterCtrlEntry OBJECT-TYPE SYNTAX SwL2PortCounterCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of entry used to clear counter information for each port of the device." INDEX { swL2PortCounterCtrlPortIndex } ::= { swL2PortCounterCtrlTable 1 } SwL2PortCounterCtrlEntry ::= SEQUENCE { swL2PortCounterCtrlPortIndex INTEGER, swL2PortCounterClearCtrl INTEGER } swL2PortCounterCtrlPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)" ::= { swL2PortCounterCtrlEntry 1 } swL2PortCounterClearCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if to clear the counters for each port of the device or not." ::= { swL2PortCounterCtrlEntry 2 } -- ----------------------------------------------------------------------------- -- swL2PortErrTable -- ----------------------------------------------------------------------------- swL2PortErrTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains error information for each port." ::= { swL2PortMgmt 7 } swL2PortErrEntry OBJECT-TYPE SYNTAX SwL2PortErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information regarding port errors on the device." INDEX { swL2PortErrPortIndex } ::= { swL2PortErrTable 1 } SwL2PortErrEntry ::= SEQUENCE { swL2PortErrPortIndex INTEGER, swL2PortErrPortState INTEGER, swL2PortErrPortConnStatus INTEGER, swL2PortErrPortReason INTEGER } swL2PortErrPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number.(1..Max port number in the module)." ::= { swL2PortErrEntry 1 } swL2PortErrPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port state is enabled or disabled." ::= { swL2PortErrEntry 2 } swL2PortErrPortConnStatus OBJECT-TYPE SYNTAX INTEGER { other(1), err-disabled(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the PortStatus is err-disabled or not." ::= { swL2PortErrEntry 3 } swL2PortErrPortReason OBJECT-TYPE SYNTAX INTEGER { -- stp-lbd(1), storm-control(2), ctp-lbd(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes if the reason for the port error is STP LBD or Storm control." ::= { swL2PortErrEntry 4 } -- ----------------------------------------------------------------------------- -- swL2DiffServMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 4 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2LimitedMulticastMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 5 } -- ----------------------------------------------------------------------------- -- swL2LimitedMulticastTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2LimitedMulticastEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "." -- ::= { swL2LimitedMulticastMgmt 1 } -- -- swL2LimitedMulticastEntry OBJECT-TYPE -- SYNTAX SwL2LimitedMulticastEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of information contained in the swL2LimitedMulticastTable." -- INDEX { swL2LimitedMulticastPortIndex } -- ::= { swL2LimitedMulticastTable 1 } -- -- SwL2LimitedMulticastEntry ::= -- SEQUENCE { -- swL2LimitedMulticastPortIndex -- INTEGER, -- swL2LimitedMulticastFromIp -- IpAddress, -- swL2LimitedMulticastToIp -- IpAddress, -- swL2LimitedMulticastAccess -- INTEGER, -- swL2LimitedMulticastState -- INTEGER -- } -- -- swL2LimitedMulticastPortIndex OBJECT-TYPE -- SYNTAX INTEGER (1..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Indicates the port ." -- ::= { swL2LimitedMulticastEntry 1 } -- -- swL2LimitedMulticastFromIp OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "" -- ::= { swL2LimitedMulticastEntry 2 } -- -- swL2LimitedMulticastToIp OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "" -- ::= { swL2LimitedMulticastEntry 3 } -- -- swL2LimitedMulticastAccess OBJECT-TYPE -- SYNTAX INTEGER{ -- none(1), -- permit(2), -- deny(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "" -- ::= { swL2LimitedMulticastEntry 4 } -- -- swL2LimitedMulticastState OBJECT-TYPE -- SYNTAX INTEGER { -- other(1), -- disabled(2), -- enabled(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "" -- ::= { swL2LimitedMulticastEntry 5 } -- -- swL2LimitedMulticastResetPort OBJECT-TYPE -- SYNTAX PortList -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object resets the Limited Multicast address on the specified port. -- It always return a null message." -- ::= { swL2LimitedMulticastMgmt 2 } -- ---------------------------------------------------------------------------- swL2MulticastFilterProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about multicast filter address." ::={swL2LimitedMulticastMgmt 1} swL2MulticastFilterProfileEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast filter address information for each profile ID. " INDEX {swL2MulticastFilterProfileIndex} ::={swL2MulticastFilterProfileTable 1} SwL2MulticastFilterProfileEntry ::= SEQUENCE{ swL2MulticastFilterProfileIndex INTEGER, swL2MulticastFilterProfileName DisplayString, swL2MulticastFilterStatus RowStatus } swL2MulticastFilterProfileIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates index for each profile." ::={swL2MulticastFilterProfileEntry 1} swL2MulticastFilterProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies a profile name for each multicast filter profile." ::={swL2MulticastFilterProfileEntry 2} swL2MulticastFilterStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2MulticastFilterProfileEntry 3 } -- ---------------------------------------------------------------------------- swL2MulticastFilterProfileAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterProfileAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about multicast filter address." ::={swL2LimitedMulticastMgmt 2} swL2MulticastFilterProfileAddressEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterProfileAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast filter address information for each profile ID. " INDEX {swL2MulticastFilterProfileIdIndex,swL2MulticastFilterFromIp,swL2MulticastFilterToIp} ::={swL2MulticastFilterProfileAddressTable 1} SwL2MulticastFilterProfileAddressEntry ::= SEQUENCE{ swL2MulticastFilterProfileIdIndex INTEGER, swL2MulticastFilterFromIp IpAddress, swL2MulticastFilterToIp IpAddress, swL2MulticastFilterAddressState RowStatus } swL2MulticastFilterProfileIdIndex OBJECT-TYPE SYNTAX INTEGER(1..24) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates index for each profile." ::={swL2MulticastFilterProfileAddressEntry 1} swL2MulticastFilterFromIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the head IP address of a multicast address range which will be binded to a multicast filter profile." ::={swL2MulticastFilterProfileAddressEntry 2} swL2MulticastFilterToIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the tail IP address of a multicast address range which will be binded to a multicast filter profile." ::={swL2MulticastFilterProfileAddressEntry 3} swL2MulticastFilterAddressState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry. Setting value to createAndGo(4) will add the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp to multicast filter profile. Setting value to destroy(6) will remove the multicast address list specified in swL2MulticastFilterFromIp and swL2MulticastFilterToIp from multicast filter profile." ::={swL2MulticastFilterProfileAddressEntry 4} -- ---------------------------------------------------------------------------- swL2LimitedMulticastFilterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2LimitedMulticastFilterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that used to bind port to profile id." ::={swL2LimitedMulticastMgmt 3} swL2LimitedMulticastFilterPortEntry OBJECT-TYPE SYNTAX SwL2LimitedMulticastFilterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information that used to bind port to profile id. " INDEX {swL2LimitedMulticastFilterPortIndex} ::={swL2LimitedMulticastFilterPortTable 1} SwL2LimitedMulticastFilterPortEntry ::= SEQUENCE{ swL2LimitedMulticastFilterPortIndex INTEGER, swL2LimitedMulticastFilterPortProfileID DisplayString, swL2LimitedMulticastFilterPortAccess INTEGER, swL2LimitedMulticastFilterPortProfileStatus INTEGER } swL2LimitedMulticastFilterPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies port as an index." ::={swL2LimitedMulticastFilterPortEntry 1} swL2LimitedMulticastFilterPortAccess OBJECT-TYPE SYNTAX INTEGER { permit(1), deny(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the access status for each port." ::= {swL2LimitedMulticastFilterPortEntry 2} swL2LimitedMulticastFilterPortProfileID OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies a profile ID list for each port." ::={swL2LimitedMulticastFilterPortEntry 3} swL2LimitedMulticastFilterPortProfileStatus OBJECT-TYPE SYNTAX INTEGER { other(1), add(2), delete(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "Controls the multicast filter profile list which bind to each port. When set add(2), multicast filter profile ID list which specifies in swL2LimitedMulticastFilterPortProfileID will be bound to the port. When set delete(3), multicast filter profile ID list which specifies in swL2LimitedMulticastFilterPortProfileID will be unbound from the port. The attribute value reverts to 'other' once the action has been done." ::={swL2LimitedMulticastFilterPortEntry 4} -- ---------------------------------------------------------------------------- swL2MulticastFilterPortMaxGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterPortMaxGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about max group number based on port." ::={swL2LimitedMulticastMgmt 4} swL2MulticastFilterPortMaxGroupEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterPortMaxGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of max group number information for each port. " INDEX {swL2MulticastFilterPortMaxGroupPortIndex} ::={swL2MulticastFilterPortMaxGroupTable 1} SwL2MulticastFilterPortMaxGroupEntry ::= SEQUENCE{ swL2MulticastFilterPortMaxGroupPortIndex INTEGER, swL2MulticastFilterPortMaxGroup INTEGER } swL2MulticastFilterPortMaxGroupPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies port number as table index." ::={swL2MulticastFilterPortMaxGroupEntry 1} swL2MulticastFilterPortMaxGroup OBJECT-TYPE SYNTAX INTEGER(0..256) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies maximum multicast filter group numbers for each port. Default value is 0,and 0 means infinite." ::= { swL2MulticastFilterPortMaxGroupEntry 2 } -- ----------------------------------------------------------------------------- -- swL2QOSMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 6 } -- ----------------------------------------------------------------------------- swL2QOSBandwidthControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2QOSBandwidthControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { swL2QOSMgmt 1 } swL2QOSBandwidthControlEntry OBJECT-TYPE SYNTAX SwL2QOSBandwidthControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in the swL2QOSBandwidthControlTable." INDEX { swL2QOSBandwidthPortIndex } ::= { swL2QOSBandwidthControlTable 1 } SwL2QOSBandwidthControlEntry ::= SEQUENCE { swL2QOSBandwidthPortIndex INTEGER, swL2QOSBandwidthRxRate INTEGER, swL2QOSBandwidthTxRate INTEGER, swL2QOSBandwidthRadiusRxRate INTEGER, swL2QOSBandwidthRadiusTxRate INTEGER } swL2QOSBandwidthPortIndex OBJECT-TYPE SYNTAX INTEGER (1..768) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port ." ::= { swL2QOSBandwidthControlEntry 1 } swL2QOSBandwidthRxRate OBJECT-TYPE SYNTAX INTEGER (64..1024001) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates RX Rate of the specified port. Value 1024001 means no limit." ::= { swL2QOSBandwidthControlEntry 2 } swL2QOSBandwidthTxRate OBJECT-TYPE SYNTAX INTEGER (64..1024001) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates TX Rate of the specified port. Value 1024001 means no limit." ::= { swL2QOSBandwidthControlEntry 3 } swL2QOSBandwidthRadiusRxRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The RxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured RxRate. " ::= { swL2QOSBandwidthControlEntry 4 } swL2QOSBandwidthRadiusTxRate OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The TxRate value comes from RADIUS server, If an 802.1X port is authenticated, this value will overwrites the locally configured TxRate. " ::= { swL2QOSBandwidthControlEntry 5 } -- ----------------------------------------------------------------------------- swL2QOSSchedulingTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2QOSSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { swL2QOSMgmt 2 } swL2QOSSchedulingEntry OBJECT-TYPE SYNTAX SwL2QOSSchedulingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in the swL2QOSSchedulingTable." INDEX { swL2QOSSchedulingClassIndex } ::= { swL2QOSSchedulingTable 1 } SwL2QOSSchedulingEntry ::= SEQUENCE { swL2QOSSchedulingClassIndex INTEGER, swL2QOSSchedulingMaxPkts INTEGER, swL2QOSSchedulingMechanism INTEGER, swL2QOSSchedulingMaxLatency INTEGER } swL2QOSSchedulingClassIndex OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the hardware queue number." ::= { swL2QOSSchedulingEntry 1 } swL2QOSSchedulingMaxPkts OBJECT-TYPE SYNTAX INTEGER (0..15) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the maximum number of packets the hardware priority queue will be allowed to transmit before allowing the next lowest priority queue to transmit its packets. a value between 0 and 15 can be specified." ::= { swL2QOSSchedulingEntry 2 } swL2QOSSchedulingMechanism OBJECT-TYPE SYNTAX INTEGER { strict(1), roundrobin(2), weightfair(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the mechanism of QoS scheduling." ::= { swL2QOSSchedulingEntry 3 } swL2QOSSchedulingMaxLatency OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the maximum amount of time the hardware priority queue will be allowed to transmit packets before allowing the next lowest priority queue to begin transmitting its packets. A value between 0 and 255 can be specified- with this value multiplied by 16 ms to arrive at the total allowed time for queue to transmit packets. For example, a value of 3 specifies 3*16=48 ms. The queue will continue transmitting the last packet until it is finished when the max-latency timer expires. " ::= { swL2QOSSchedulingEntry 4} -- ----------------------------------------------------------------------------- swL2QOS8021pUserPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2QOS8021pUserPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { swL2QOSMgmt 3 } swL2QOS8021pUserPriorityEntry OBJECT-TYPE SYNTAX SwL2QOS8021pUserPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in the swL2QOS8021pUserPriorityTable." INDEX { swL2QOS8021pUserPriorityIndex } ::= { swL2QOS8021pUserPriorityTable 1 } SwL2QOS8021pUserPriorityEntry ::= SEQUENCE { swL2QOS8021pUserPriorityIndex INTEGER, swL2QOS8021pUserPriorityClass INTEGER } swL2QOS8021pUserPriorityIndex OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "The 802.1p user priority ." ::= { swL2QOS8021pUserPriorityEntry 1 } swL2QOS8021pUserPriorityClass OBJECT-TYPE SYNTAX INTEGER (0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of the switch's hardware priority queue. The switch has seven hardware priority queues available. They are numbered between 0 (the lowest priority) and 6 (the highest priority)." ::= { swL2QOS8021pUserPriorityEntry 2 } -- ----------------------------------------------------------------------------- swL2QOS8021pDefaultPriorityTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2QOS8021pDefaultPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." ::= { swL2QOSMgmt 4 } swL2QOS8021pDefaultPriorityEntry OBJECT-TYPE SYNTAX SwL2QOS8021pDefaultPriorityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in the swL2QOS8021pDefaultPriorityTable." INDEX { swL2QOS8021pDefaultPriorityIndex } ::= { swL2QOS8021pDefaultPriorityTable 1 } SwL2QOS8021pDefaultPriorityEntry ::= SEQUENCE { swL2QOS8021pDefaultPriorityIndex INTEGER, swL2QOS8021pDefaultPriority INTEGER, swL2QOS8021pRadiusPriority INTEGER } swL2QOS8021pDefaultPriorityIndex OBJECT-TYPE SYNTAX INTEGER (1..768) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port number ." ::= { swL2QOS8021pDefaultPriorityEntry 1 } swL2QOS8021pDefaultPriority OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The priority value to assign to untagged packets received by the switch ports on the switch.." ::= { swL2QOS8021pDefaultPriorityEntry 2 } swL2QOS8021pRadiusPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The value of 802.1p comes from RADIUS server. If an 802.1X port is authenticated, this value will overwrite the local configured value." ::= { swL2QOS8021pDefaultPriorityEntry 3 } swL2QOSSchedulingMechanismCtrl OBJECT-TYPE SYNTAX INTEGER { strict(1), roundrobin(2), weightfair(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls QoS scheduling Mechanism." ::= { swL2QOSMgmt 5 } swL2QOSHolPreventionCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Controls QoS HoL Prevention" ::= { swL2QOSMgmt 6 } -- ----------------------------------------------------------------------------- -- swL2PortSecurityMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 7 } -- ----------------------------------------------------------------------------- swL2PortSecurityControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2PortSecurityControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A port security feature which controls the address leaning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function. When it is enabled and a number is given said N, which allows N addresses to be learned on this port, the first N learned addresses are locked at this port as static entries. When the learned addresses number reaches N, any incoming packet without learned source addresses are discarded (e.g. dropped) and no more new addresses can be learned on this port." ::= { swL2PortSecurityMgmt 1 } swL2PortSecurityControlEntry OBJECT-TYPE SYNTAX SwL2PortSecurityControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information contained in the swL2PortSecurityControlTable." INDEX { swL2PortSecurityPortIndex } ::= { swL2PortSecurityControlTable 1 } SwL2PortSecurityControlEntry ::= SEQUENCE { swL2PortSecurityPortIndex INTEGER, swL2PortSecurityMaxLernAddr INTEGER, swL2PortSecurityMode INTEGER, swL2PortSecurityAdmState INTEGER, swL2PortSecurityEntryClearCtrl INTEGER } swL2PortSecurityPortIndex OBJECT-TYPE SYNTAX INTEGER (1..768) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the secured port to lock address learning." ::= { swL2PortSecurityControlEntry 1 } swL2PortSecurityMaxLernAddr OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates allowable number of addresses to be learned on this port." ::= { swL2PortSecurityControlEntry 2 } swL2PortSecurityMode OBJECT-TYPE SYNTAX INTEGER { other(1), permanent(2), deleteOnTimeout(3), deleteOnReset(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the mode of locking address. In deleteOnTimeout(3) mode - the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can be learned has to be increased by one. In deleteOnReset(4) mode - Locked addresses never age out unless the system restarts which will prevent port movement or intrusion." ::= { swL2PortSecurityControlEntry 3 } swL2PortSecurityAdmState OBJECT-TYPE SYNTAX INTEGER { other(1), enable(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates administration state of locking address." ::= { swL2PortSecurityControlEntry 4 } swL2PortSecurityEntryClearCtrl OBJECT-TYPE SYNTAX INTEGER { other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to clear port security entries by port. Setting this value to 'start' will execute the clear action, Once cleared, the value returns to 'other'." ::= { swL2PortSecurityControlEntry 5 } -- ----------------------------------------------------------------------------- swL2PortSecurityDelCtrl OBJECT IDENTIFIER ::= { swL2PortSecurityMgmt 2 } swL2PortSecurityDelVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates VLAN name." ::= { swL2PortSecurityDelCtrl 1 } swL2PortSecurityDelPort OBJECT-TYPE SYNTAX INTEGER (1..768) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the port." ::= { swL2PortSecurityDelCtrl 2 } swL2PortSecurityDelMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies a MAC address." ::= { swL2PortSecurityDelCtrl 3 } swL2PortSecurityDelActivity OBJECT-TYPE SYNTAX INTEGER { none(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "." ::= { swL2PortSecurityDelCtrl 4 } -- ----------------------------------------------------------------------------- swL2PortSecurityTrapLogState OBJECT-TYPE SYNTAX INTEGER { other(1), enable(2), disable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "When enabled(2),whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant information will be logged into the system." ::= { swL2PortSecurityMgmt 3 } -- ----------------------------------------------------------------------------- -- swL2DhcpRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 8 } -- ----------------------------------------------------------------------------- swL2DhcpRelayState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DHCP relay function is enabled or disabled." ::= { swL2DhcpRelayMgmt 1 } swL2DhcpRelayHopCount OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum number of router hops that DHCP packets can cross." ::= { swL2DhcpRelayMgmt 2 } swL2DhcpRelayTimeThreshold OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the minimum time in seconds within which the switch must relay the DHCP request. If this time is exceeded, the switch will drop the DHCP packet." ::= { swL2DhcpRelayMgmt 3 } swL2DhcpRelayOption82State OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the DHCP relay agent information option 82 function is enabled or disabled." ::= { swL2DhcpRelayMgmt 4 } swL2DhcpRelayOption82Check OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if the checking mechanism of DHCP relay agent information option 82 is enabled or disabled." ::= { swL2DhcpRelayMgmt 5 } swL2DhcpRelayOption82Policy OBJECT-TYPE SYNTAX INTEGER { replace(1), drop(2), keep(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the reforwarding policy of DHCP relay agent information option 82. replace(1) - replace the exiting option 82 field in messages. drop(2) - discard messages with existing option 82 field. keep(3) - retain the existing option 82 field messages." ::= { swL2DhcpRelayMgmt 6 } swL2DhcpRelayCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DhcpRelayCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the IP address as a destination to forward (relay) DHCP packets to." ::= { swL2DhcpRelayMgmt 7 } swL2DhcpRelayCtrlEntry OBJECT-TYPE SYNTAX SwL2DhcpRelayCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information that specifies the IP address as a destination to forward (relay) DHCP packets to." INDEX { swL2DhcpRelayCtrlInterfaceName, swL2DhcpRelayCtrlServer} ::= { swL2DhcpRelayCtrlTable 1 } SwL2DhcpRelayCtrlEntry ::= SEQUENCE { swL2DhcpRelayCtrlInterfaceName DisplayString, swL2DhcpRelayCtrlServer IpAddress, swL2DhcpRelayCtrlState INTEGER } swL2DhcpRelayCtrlInterfaceName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the IP interface." ::= { swL2DhcpRelayCtrlEntry 1 } swL2DhcpRelayCtrlServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The DHCP server IP address." ::= { swL2DhcpRelayCtrlEntry 2 } swL2DhcpRelayCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), invalid(2), valid(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. invalid(2) - writing this value to the object, and then the corresponding entry will be removed from the table. valid(3) - this entry resides in the table." ::= { swL2DhcpRelayCtrlEntry 3 } -- ----------------------------------------------------------------------------- -- swL2TrunkMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 9 } -- ----------------------------------------------------------------------------- swL2TrunkMaxSupportedEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable)." ::= { swL2TrunkMgmt 1 } swL2TrunkCurrentNumEntries OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Current active number of entries in the trunk configuration table." ::= { swL2TrunkMgmt 2 } swL2TrunkCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies which ports group a set of ports(up to 8) into a single logical link." ::= { swL2TrunkMgmt 3 } swL2TrunkCtrlEntry OBJECT-TYPE SYNTAX SwL2TrunkCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information that specifies which ports group a set of ports(up to 8) into a single logical link." INDEX { swL2TrunkIndex } ::= { swL2TrunkCtrlTable 1 } SwL2TrunkCtrlEntry ::= SEQUENCE { swL2TrunkIndex INTEGER, -- swL2TrunkName -- DisplayString, swL2TrunkMasterPort INTEGER, swL2TrunkMember PortList, swL2TrunkFloodingPort INTEGER, swL2TrunkType INTEGER, swL2TrunkState RowStatus } swL2TrunkIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index number of the logical port trunk group. The trunk group number depends on the existence of unit and module." ::= { swL2TrunkCtrlEntry 1 } -- swL2TrunkName OBJECT-TYPE -- SYNTAX DisplayString (SIZE (0..12)) -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION -- "The name of logical port trunk group." -- ::= { swL2TrunkCtrlEntry 2 } swL2TrunkMasterPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The object indicates the master port number of the port trunk entry. When using Port Trunk, you cannot configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on)." ::= { swL2TrunkCtrlEntry 3 } swL2TrunkMember OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the number of ports included in this Trunk group. The trunk port number depends on the existence of the module. The maximum number of ports is 8 for one trunk group." ::= { swL2TrunkCtrlEntry 4 } swL2TrunkFloodingPort OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The object indicates the flooding port number of the port trunk entry. The first port of the Trunk group is implicitly configured to be the flooding port." ::= { swL2TrunkCtrlEntry 5 } swL2TrunkType OBJECT-TYPE SYNTAX INTEGER { other(1), static(2), lacp(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the type of trunk group. static : is static trunk group lacp : is LACP trunk group . " ::= { swL2TrunkCtrlEntry 6 } swL2TrunkState OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2TrunkCtrlEntry 7 } swL2TrunkAlgorithm OBJECT-TYPE SYNTAX INTEGER { other(1), mac-source(2), mac-destination(3), mac-source-dest(4), ip-source(5), ip-destination(6), ip-source-dest(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data." ::= { swL2TrunkMgmt 4 } swL2TrunkLACPPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkLACPPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies which ports group a set of ports(up to 8) into a single logical link." ::= { swL2TrunkMgmt 5 } swL2TrunkLACPPortEntry OBJECT-TYPE SYNTAX SwL2TrunkLACPPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information specifies which ports group a set of ports(up to 8) into a single logical link." INDEX { swL2TrunkLACPPortIndex } ::= { swL2TrunkLACPPortTable 1 } SwL2TrunkLACPPortEntry ::= SEQUENCE { swL2TrunkLACPPortIndex INTEGER, swL2TrunkLACPPortState INTEGER } swL2TrunkLACPPortIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The index of logical port LACP. " ::= { swL2TrunkLACPPortEntry 1 } swL2TrunkLACPPortState OBJECT-TYPE SYNTAX INTEGER{ active(1), passive(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of logical port LACP." ::= { swL2TrunkLACPPortEntry 2 } swL2TrunkVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrunkVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the VLAN trunking feature of the device." ::= { swL2TrunkMgmt 6 } swL2TrunkVLANEntry OBJECT-TYPE SYNTAX SwL2TrunkVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is used to configure the VLAN trunking settings for each port." INDEX { swL2TrunkVLANPort } ::= { swL2TrunkVLANTable 1 } SwL2TrunkVLANEntry ::= SEQUENCE { swL2TrunkVLANPort INTEGER, swL2TrunkVLANState INTEGER } swL2TrunkVLANPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port being configured." ::= { swL2TrunkVLANEntry 1 } swL2TrunkVLANState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The state of the logical port." ::= { swL2TrunkVLANEntry 2 } -- ----------------------------------------------------------------------------- -- swPortMirrorPackage OBJECT IDENTIFIER ::= { swL2MgmtMIB 10 } -- ----------------------------------------------------------------------------- swL2MirrorLogicTargetPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates which switch port will sniff another port. A trunk port member cannot be configured as a target snooping port. The port number is the sequential (logical) number which is also applied to the bridge MIB, etc." ::= { swL2MirrorMgmt 1 } swL2MirrorPortSourceIngress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the port where ingress packets will be sniffed." ::= { swL2MirrorMgmt 2 } swL2MirrorPortSourceEgress OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This represents the port where egress packets will be sniffed." ::= { swL2MirrorMgmt 3 } swL2MirrorPortState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - After writing this value to the object, the corresponding entry will be removed from the table. enabled(3) - This entry resides in the table." ::= { swL2MirrorMgmt 4 } -- ----------------------------------------------------------------------------- -- swL2IGMPMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 11 } -- ----------------------------------------------------------------------------- swL2IGMPMaxSupportedVlans OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of VLANs in the layer 2 IGMP control table (swL2IGMPCtrlTable)." ::= { swL2IGMPMgmt 1 } swL2IGMPMaxIpGroupNumPerVlan OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of multicast IP groups per VLAN in the layer 2 IGMP information table(swL2IGMPQueryInfoTable)." ::= { swL2IGMPMgmt 2 } -- swL2IGMPLastQueryIPAddr OBJECT-TYPE -- SYNTAX IpAddress -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the IP address of last sent IGMP query packet." -- ::= { swL2IGMPMgmt 3 } swL2IGMPSnoopingMulticastVlanState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "It indicates the global state of igmp-snoop multicast-vlan." ::={swL2IGMPMgmt 3} swL2IGMPCtrlTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table controls the VLAN's IGMP function. Its scale depends on the current VLAN state (swL2VlanInfoStatus). If the VLAN is disabled, there is only one entry in the table, with an index of 1. If the VLAN is in Port-Base or 802.1q mode, the maximum number of entries can be 12, with an index range from 1 to 12." ::= { swL2IGMPMgmt 4 } swL2IGMPCtrlEntry OBJECT-TYPE SYNTAX SwL2IGMPCtrlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled." INDEX { swL2IGMPCtrlVid } ::= { swL2IGMPCtrlTable 1 } SwL2IGMPCtrlEntry ::= SEQUENCE { -- swL2IGMPCtrlIndex -- INTEGER, swL2IGMPCtrlVid INTEGER, swL2IGMPQueryInterval INTEGER, swL2IGMPMaxResponseTime INTEGER, swL2IGMPRobustness INTEGER, swL2IGMPLastMemberQueryInterval INTEGER, swL2IGMPHostTimeout INTEGER, swL2IGMPRouteTimeout INTEGER, swL2IGMPLeaveTimer INTEGER, swL2IGMPQueryState INTEGER, swL2IGMPCurrentState INTEGER, swL2IGMPCtrlState INTEGER, swL2IGMPFastLeaveState INTEGER } -- swL2IGMPCtrlIndex OBJECT-TYPE -- SYNTAX INTEGER (1..12) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the IGMP control entry number. Its scale -- depends on the current VLAN state (swL2VlanInfoStatus). If the -- VLAN is disabled, there is only one entry in the table, with index 1. -- If VLAN is in Port-Base or 802.1q mode, the maximum number of entries -- is 12, with an index range from 1 to 12." -- ::= { swL2IGMPCtrlEntry 1 } swL2IGMPCtrlVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IGMP control entry's VLAN ID. If the VLAN is disabled, the VID is always 0 and cannot be changed by management users. If the VLAN is in Port-Base mode, the VID is arranged from 1 to 12, in a fixed form. If the VLAN is in 802.1q mode, the VID setting can be changed from 1 to 4094 by the management user, and the VID in each entry must be unique within the IGMP Control Table." ::= { swL2IGMPCtrlEntry 1 } swL2IGMPQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "The frequency at which IGMP Host-Query packets are transmitted on this switch." DEFVAL { 125 } ::= { swL2IGMPCtrlEntry 2 } swL2IGMPMaxResponseTime OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum query response time on this switch." DEFVAL { 10 } ::= { swL2IGMPCtrlEntry 3 } swL2IGMPRobustness OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses." DEFVAL { 2 } ::= { swL2IGMPCtrlEntry 4 } swL2IGMPLastMemberQueryInterval OBJECT-TYPE SYNTAX INTEGER (1..25) MAX-ACCESS read-write STATUS current DESCRIPTION "The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages." DEFVAL { 1 } ::= { swL2IGMPCtrlEntry 5 } swL2IGMPHostTimeout OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-write STATUS current DESCRIPTION "The timer value for sending IGMP query packets when none were sent by the host on the LAN. The timer works on a per-VLAN basis. Our device will be activated to send the query messages if the timer expires. Please reference RFC2236-1997." DEFVAL { 260 } ::= { swL2IGMPCtrlEntry 6 } swL2IGMPRouteTimeout OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-write STATUS current DESCRIPTION "The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages." DEFVAL { 260 } ::= { swL2IGMPCtrlEntry 7 } swL2IGMPLeaveTimer OBJECT-TYPE SYNTAX INTEGER (1..16711450) MAX-ACCESS read-write STATUS current DESCRIPTION "When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left." DEFVAL { 1 } ::= { swL2IGMPCtrlEntry 8 } swL2IGMPQueryState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object decides if the IGMP query is enabled or disabled." ::= { swL2IGMPCtrlEntry 9 } swL2IGMPCurrentState OBJECT-TYPE SYNTAX INTEGER { other(1), querier(2), non-querier(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current IGMP query state." ::= { swL2IGMPCtrlEntry 10 } swL2IGMPCtrlState OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP function is disabled for this entry. enable(3) - IGMP function is enabled for this entry." ::= { swL2IGMPCtrlEntry 11 } swL2IGMPFastLeaveState OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the fast-leave status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP fast-leave function is disabled for this entry. enable(3) - IGMP fast-leave function is enabled for this entry." ::= { swL2IGMPCtrlEntry 12 } swL2IGMPQueryInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPQueryInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table contains the number current IGMP query packets which are captured by this device, as well as the IGMP query packets sent by the device." ::= { swL2IGMPMgmt 5 } swL2IGMPQueryInfoEntry OBJECT-TYPE SYNTAX SwL2IGMPQueryInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of the associated VLAN entry are all enabled." INDEX { swL2IGMPInfoVid } ::= { swL2IGMPQueryInfoTable 1 } SwL2IGMPQueryInfoEntry ::= SEQUENCE { -- swL2IGMPInfoIndex -- INTEGER, swL2IGMPInfoVid INTEGER, swL2IGMPInfoQueryCount INTEGER, swL2IGMPInfoTxQueryCount INTEGER } -- swL2IGMPInfoIndex OBJECT-TYPE -- SYNTAX INTEGER (1..12) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "This object indicates the IGMP query information entry -- number. It could be up to 12 entries, depending on the current -- number of VLAN entries." -- ::= { swL2IGMPQueryInfoEntry 1 } swL2IGMPInfoVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VID of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable)." ::= { swL2IGMPQueryInfoEntry 1 } swL2IGMPInfoQueryCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the number of query packets received since the IGMP function was enabled, on a per-VLAN basis." ::= { swL2IGMPQueryInfoEntry 2 } swL2IGMPInfoTxQueryCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1." ::= { swL2IGMPQueryInfoEntry 3 } swL2IGMPInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing current IGMP information which was captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of the associated VLAN entries are all enabled. Note that the priority of IGMP table entries is lower than the Filtering Table, i.e. if there is a table hash collision between entries in the IGMP Table and Filtering Table inside the switch's H/W address table, then Filtering Table entry overwrites the colliding entry of the IGMP Table. Also see the swL2FilterMgmt description." ::= { swL2IGMPMgmt 6 } swL2IGMPInfoEntry OBJECT-TYPE SYNTAX SwL2IGMPInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about current IGMP information which was captured by this device, provided that the swL2DevCtrlIGMPSnooping and the swL2IGMPCtrlState of associated VLAN entries are all enabled." INDEX { swL2IGMPVid , swL2IGMPGroupIpAddr } ::= { swL2IGMPInfoTable 1 } SwL2IGMPInfoEntry ::= SEQUENCE { swL2IGMPVid INTEGER, swL2IGMPGroupIpAddr IpAddress, swL2IGMPMacAddr MacAddress, swL2IGMPPortMap PortList, swL2IGMPIpGroupReportCount INTEGER } swL2IGMPVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VID of individual IGMP table entries. It shows the VID IGMP report information captured on the network." ::= { swL2IGMPInfoEntry 1 } swL2IGMPGroupIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies group IP addresses which were captured from IGMP packets, on a per-VLAN basis." ::= { swL2IGMPInfoEntry 2 } swL2IGMPMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies MAC addresses which correspond to the swL2IGMPGroupIpAddr, on per-VLAN basis." ::= { swL2IGMPInfoEntry 3 } swL2IGMPPortMap OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates which ports belong to the same multicast group, on a per-VLAN basis. Each multicast group has an octet string which is indicated by a port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bits corresponding to the port from which a frame is received is irrelevant). The 4 octets represent one unit port according to its logical port. If the unit is less than 32 ports, other ports are not affected and are replaced with zeroes." ::= { swL2IGMPInfoEntry 4 } swL2IGMPIpGroupReportCount OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates how many report packets were receive by our device, that correspond with this entry when the IGMP function is enabled on per-VLAN basis." ::= { swL2IGMPInfoEntry 5 } -- ----------------------------------------------------------------------------- -- swL2IGMPRouterPortTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 7 } -- ----------------------------------------------------------------------------- swL2IGMPRouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of the router port table." ::= { swL2IGMPMgmt 7 } swL2IGMPRouterPortEntry OBJECT-TYPE SYNTAX SwL2IGMPRouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of swL2IGMPRouterPortTable." INDEX { swL2IGMPRouterPortVlanid } ::= { swL2IGMPRouterPortTable 1 } SwL2IGMPRouterPortEntry ::= SEQUENCE { swL2IGMPRouterPortVlanid INTEGER, swL2IGMPRouterPortVlanName DisplayString, swL2IGMPRouterPortStaticPortList PortList, swL2IGMPRouterPortDynamicPortList PortList, swL2IGMPRouterPortForbiddenPortList PortList } swL2IGMPRouterPortVlanid OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN ID of the router port entry." ::= { swL2IGMPRouterPortEntry 1 } swL2IGMPRouterPortVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN name of the router port entry." ::= { swL2IGMPRouterPortEntry 2 } swL2IGMPRouterPortStaticPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the static portlist of the router port entry." ::= { swL2IGMPRouterPortEntry 3 } swL2IGMPRouterPortDynamicPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the dynamic portlist of the router port entry." ::= { swL2IGMPRouterPortEntry 4 } swL2IGMPRouterPortForbiddenPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the forbidden portlist of the router port entry." ::= { swL2IGMPRouterPortEntry 5 } -- ----------------------------------------------------------------------------- -- swL2IGMPMulticastVlanTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 8 } -- ----------------------------------------------------------------------------- swL2IGMPMulticastVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The information of the IGMP snooping multicast VLAN table." ::= { swL2IGMPMgmt 8 } swL2IGMPMulticastVlanEntry OBJECT-TYPE SYNTAX SwL2IGMPMulticastVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry of swL2IGMPMulticastVlanTable." INDEX { swL2IGMPMulticastVlanid} ::= { swL2IGMPMulticastVlanTable 1 } SwL2IGMPMulticastVlanEntry ::= SEQUENCE { swL2IGMPMulticastVlanid INTEGER, swL2IGMPMulticastVlanName DisplayString, swL2IGMPMulticastVlanSourcePort PortList, swL2IGMPMulticastVlanMemberPort PortList, swL2IGMPMulticastVlanTagMemberPort PortList, swL2IGMPMulticastVlanState INTEGER, swL2IGMPMulticastVlanReplaceSourceIp IpAddress, swL2IGMPMulticastVlanRowStatus RowStatus, swL2IGMPMulticastVlanRemoveAllMcastAddrListAction INTEGER } swL2IGMPMulticastVlanid OBJECT-TYPE SYNTAX INTEGER (2..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN ID of the IGMP snooping multicast VLAN entry." ::= { swL2IGMPMulticastVlanEntry 1 } swL2IGMPMulticastVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VLAN name of the IGMP snooping multicast VLAN entry." ::= { swL2IGMPMulticastVlanEntry 2 } swL2IGMPMulticastVlanSourcePort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the portlist of the source ports of IGMP snooping multicast VLAN. The source ports will be set as tag ports of the VLAN entry. And the IGMP control messages received from the member ports would be forwarded to the source ports. " ::= { swL2IGMPMulticastVlanEntry 3 } swL2IGMPMulticastVlanMemberPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the portlist of the member ports of the IGMP snooping multicast VLAN. The source ports will be set as untagged ports of the VLAN entry. And the IGMP control messages received from the member ports would be forwarded to the source ports. " ::= { swL2IGMPMulticastVlanEntry 4 } swL2IGMPMulticastVlanTagMemberPort OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicate the portlist of the tag member ports of IGMP snooping multicast VLAN." ::= { swL2IGMPMulticastVlanEntry 5 } swL2IGMPMulticastVlanState OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " This object can be enabled or disabled IGMP-snooping multicast VLAN." ::= { swL2IGMPMulticastVlanEntry 6 } swL2IGMPMulticastVlanReplaceSourceIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The replace source IP of this multicast vlan." ::= { swL2IGMPMulticastVlanEntry 7 } swL2IGMPMulticastVlanRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2IGMPMulticastVlanEntry 8 } swL2IGMPMulticastVlanRemoveAllMcastAddrListAction OBJECT-TYPE SYNTAX INTEGER { other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates if remove all the multicast address list from the IGMP multicast VLAN or not." ::= { swL2IGMPMulticastVlanEntry 9 } -- ----------------------------------------------------------------------------- -- swL2IGMPMulticastVlanGroupTable OBJECT IDENTIFIER ::= { swL2IGMPMgmt 9 } -- ----------------------------------------------------------------------------- swL2IGMPMulticastVlanGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2IGMPMulticastVlanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table containing the IGMP snooping multicast VLAN group information" ::= { swL2IGMPMgmt 9 } swL2IGMPMulticastVlanGroupEntry OBJECT-TYPE SYNTAX SwL2IGMPMulticastVlanGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about current IGMP snooping multicast VLAN group." INDEX { swL2IGMPMulticastVlanGroupVid,swL2IGMPMulticastVlanGroupFromIp,swL2IGMPMulticastVlanGroupToIp } ::= { swL2IGMPMulticastVlanGroupTable 1 } SwL2IGMPMulticastVlanGroupEntry ::= SEQUENCE { swL2IGMPMulticastVlanGroupVid INTEGER, swL2IGMPMulticastVlanGroupFromIp IpAddress, swL2IGMPMulticastVlanGroupToIp IpAddress, swL2IGMPMulticastVlanGroupStatus RowStatus } swL2IGMPMulticastVlanGroupVid OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Vid of IGMP snooping multicast VLAN group." ::= { swL2IGMPMulticastVlanGroupEntry 1 } swL2IGMPMulticastVlanGroupFromIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the multicast address list for this VLAN." ::= { swL2IGMPMulticastVlanGroupEntry 2 } swL2IGMPMulticastVlanGroupToIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the multicast address list for this VLAN." ::= { swL2IGMPMulticastVlanGroupEntry 3 } swL2IGMPMulticastVlanGroupStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the status of this entry." ::= { swL2IGMPMulticastVlanGroupEntry 4 } -- ----------------------------------------------------------------------------- -- swL2TrafficMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 12 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2TrafficSegMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 14 } -- ----------------------------------------------------------------------------- swL2TrafficSegTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2TrafficSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies that the port can just forward traffic to the specific port list." ::= { swL2TrafficSegMgmt 1 } swL2TrafficSegEntry OBJECT-TYPE SYNTAX SwL2TrafficSegEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of information which specifies the port with its traffic forwarding list." INDEX { swL2TrafficSegPort } ::= { swL2TrafficSegTable 1 } SwL2TrafficSegEntry ::= SEQUENCE { swL2TrafficSegPort INTEGER, swL2TrafficSegForwardPorts PortList } swL2TrafficSegPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the logical port." ::= { swL2TrafficSegEntry 1 } swL2TrafficSegForwardPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "The port list to which the specific port can forward traffic." ::= { swL2TrafficSegEntry 2 } -- ----------------------------------------------------------------------------- -- swL2StpMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 15 } -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swL2CosMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 16 } -- ----------------------------------------------------------------------------- -- ---------------------------------------------------------------------------- -- swL2MulticastFilterMode OBJECT IDENTIFIER ::= { swL2MgmtMIB 17 } -- ---------------------------------------------------------------------------- swL2MulticastFilterModeVlanTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2MulticastFilterModeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " A table that contains information about VLAN multicast filter mode." ::={swL2MulticastFilterMode 1} swL2MulticastFilterModeVlanEntry OBJECT-TYPE SYNTAX SwL2MulticastFilterModeVlanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast filter mode information for each VLAN. " INDEX {swL2MulticastFilterVid} ::={swL2MulticastFilterModeVlanTable 1} SwL2MulticastFilterModeVlanEntry ::= SEQUENCE{ swL2MulticastFilterVid INTEGER, swL2MulticastFilterVlanMode INTEGER } swL2MulticastFilterVid OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates VID for each VLAN." ::={swL2MulticastFilterModeVlanEntry 1} swL2MulticastFilterVlanMode OBJECT-TYPE SYNTAX INTEGER{ forward-all-groups(1), forward-unregistered-groups(2), filter-unregistered-groups(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies multicast filter mode for each VLAN." ::={swL2MulticastFilterModeVlanEntry 2} -- ---------------------------------------------------------------------------- -- swL2MulticastFilterModePortTable OBJECT-TYPE -- SYNTAX SEQUENCE OF SwL2MulticastFilterModePortEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- " A table that contains information about port multicast filter mode." -- ::={swL2MulticastFilterMode 2} -- -- swL2MulticastFilterModePortEntry OBJECT-TYPE -- SYNTAX SwL2MulticastFilterModePortEntry -- MAX-ACCESS not-accessible -- STATUS current -- DESCRIPTION -- "A list of multicast filter mode information for each port. " -- INDEX {swL2MulticastFilterPortIndex} -- ::={swL2MulticastFilterModePortTable 1} -- -- SwL2MulticastFilterModePortEntry ::= -- SEQUENCE{ -- swL2MulticastFilterPortIndex -- INTEGER, -- swL2MulticastFilterPortMode -- INTEGER -- } -- -- swL2MulticastFilterPortIndex OBJECT-TYPE -- SYNTAX INTEGER(1..65535) -- MAX-ACCESS read-only -- STATUS current -- DESCRIPTION -- "Specifies the port number." -- ::={swL2MulticastFilterModePortEntry 1} -- -- swL2MulticastFilterPortMode OBJECT-TYPE -- SYNTAX INTEGER{ -- forward-all-groups(1), -- forward-unregistered-groups(2), -- filter-unregistered-groups(3) -- } -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "Specifies multicast filter mode for each port." -- ::={swL2MulticastFilterModePortEntry 2} -- ---------------------------------------------------------------------------- -- swL2LoopDetectMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 18 } -- ---------------------------------------------------------------------------- swL2LoopDetectCtrl OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 1 } swL2LoopDetectAdminState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection status for the system." ::= { swL2LoopDetectCtrl 1 } swL2LoopDetectInterval OBJECT-TYPE SYNTAX INTEGER (1..32767) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the interval value, the range is from 1 to 32767 seconds." ::= { swL2LoopDetectCtrl 2 } swL2LoopDetectRecoverTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the recover time, the range is from 60 to 1000000. The value of 0 disables the recover function." ::= { swL2LoopDetectCtrl 3 } swL2LoopDetectMode OBJECT-TYPE SYNTAX INTEGER { vlan-based(1), port-based(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection mode for the system." ::= { swL2LoopDetectCtrl 4 } swL2LoopDetectTrapMode OBJECT-TYPE SYNTAX INTEGER { none(1), loop-detected(2), loop-cleared(3), both(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection trap mode for the system." ::= { swL2LoopDetectCtrl 5 } -- ---------------------------------------------------------------------------- swL2LoopDetectPortMgmt OBJECT IDENTIFIER ::= { swL2LoopDetectMgmt 2 } swL2LoopDetectPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2LoopDetectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the loopback detection function specified by port." ::= { swL2LoopDetectPortMgmt 1 } swL2LoopDetectPortEntry OBJECT-TYPE SYNTAX SwL2LoopDetectPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table specifies the loopback detection function specified by port." INDEX { swL2LoopDetectPortIndex } ::= { swL2LoopDetectPortTable 1 } SwL2LoopDetectPortEntry ::= SEQUENCE { swL2LoopDetectPortIndex INTEGER, swL2LoopDetectPortState INTEGER, swL2LoopDetectPortLoopVLAN DisplayString, swL2LoopDetectPortLoopStatus INTEGER } swL2LoopDetectPortIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number. The range is from 1 to the maximum port number specified in the module" ::= { swL2LoopDetectPortEntry 1 } swL2LoopDetectPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the loopback detection function state on the port." ::= { swL2LoopDetectPortEntry 2 } swL2LoopDetectPortLoopVLAN OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN list that has detected a loopback." ::= { swL2LoopDetectPortEntry 3 } swL2LoopDetectPortLoopStatus OBJECT-TYPE SYNTAX INTEGER { normal(1), loop(2), error(3), none(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the port status." ::= { swL2LoopDetectPortEntry 4 } -- ----------------------------------------------------------------------------- -- Layer 2 Trap -- ----------------------------------------------------------------------------- swL2Notify OBJECT IDENTIFIER ::= { swL2MgmtMIBTraps 1 } swL2NotifyMgmt OBJECT IDENTIFIER ::= { swL2Notify 1 } swL2NotifyPrefix OBJECT IDENTIFIER ::= { swL2Notify 2 } swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 } -- ----------------------------------------------------------------------------- -- swL2NotifyMgmt -- ----------------------------------------------------------------------------- swL2macNotificationSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the level of macNotification detection." ::= { swL2NotifyMgmt 1 } swL2PortSecurityViolationSeverity OBJECT-TYPE SYNTAX AgentNotifyLevel MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate the level of PortSecurityViolation detection." ::= { swL2NotifyMgmt 2 } -- ----------------------------------------------------------------------------- -- swL2NotifFirmware OBJECT IDENTIFIER ::= { swL2NotifyPrefix 0 } -- ----------------------------------------------------------------------------- swL2macNotification NOTIFICATION-TYPE OBJECTS { swL2macNotifyInfo } STATUS current DESCRIPTION " This trap indicates the MAC addresses variation in address table . " ::= { swL2NotifFirmware 1 } swL2PortSecurityViolationTrap NOTIFICATION-TYPE OBJECTS { swL2PortSecurityPortIndex, swL2PortSecurityViolationMac } STATUS current DESCRIPTION "When the port-security trap is enabled, new MAC addresses that violate the pre-defined port security configuration will trigger trap messages to be sent out." ::= { swL2NotifFirmware 2 } swL2PortLoopOccurred NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex } STATUS current DESCRIPTION "The trap is sent when Port loop occurred." ::={swL2NotifFirmware 3} swL2PortLoopRestart NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex } STATUS current DESCRIPTION "The trap is sent when Port loop restart after interval time." ::={swL2NotifFirmware 4} swL2VlanLoopOccurred NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex, swL2VlanLoopDetectVID } STATUS current DESCRIPTION "The trap is sent when Port with VID loop occurred." ::={swL2NotifFirmware 5} swL2VlanLoopRestart NOTIFICATION-TYPE OBJECTS { swL2LoopDetectPortIndex, swL2VlanLoopDetectVID } STATUS current DESCRIPTION "The trap is sent when Port with VID loop restart after interval time." ::={swL2NotifFirmware 6} -- ----------------------------------------------------------------------------- -- notificationBidings -- ----------------------------------------------------------------------------- swl2NotificationBidings OBJECT IDENTIFIER ::= { swL2NotifyPrefix 1 } swL2macNotifyInfo OBJECT-TYPE SYNTAX OCTET STRING(SIZE (0..1024)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the last time reboot information." ::= { swl2NotificationBidings 1 } swL2PortSecurityViolationMac OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the MAC address that violates the port security configuration." ::= { swl2NotificationBidings 2 } swL2VlanLoopDetectVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "This object indicates the VID that has detected a loopback." ::= { swl2NotificationBidings 3 } -- ******************************************************************** -- swL2DhcpLocalRelayMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 24 } -- ******************************************************************** swL2DhcpLocalRelayState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of the DHCP local relay function of the switch." ::= { swL2DhcpLocalRelayMgmt 1 } swL2DhcpLocalRelayVLANTable OBJECT-TYPE SYNTAX SEQUENCE OF SwL2DhcpLocalRelayVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to manage the DHCP local relay status for each VLAN." ::={ swL2DhcpLocalRelayMgmt 2} swL2DhcpLocalRelayVLANEntry OBJECT-TYPE SYNTAX SwL2DhcpLocalRelayVLANEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object lists the current VLANs in the switch and their corresponding DHCP local relay status." INDEX { swL2DhcpLocalRelayVLANID } ::={ swL2DhcpLocalRelayVLANTable 1 } SwL2DhcpLocalRelayVLANEntry ::= SEQUENCE{ swL2DhcpLocalRelayVLANID INTEGER, swL2DhcpLocalRelayVLANState INTEGER } swL2DhcpLocalRelayVLANID OBJECT-TYPE SYNTAX INTEGER (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This object shows the VIDs of the current VLANS in the switch." ::= { swL2DhcpLocalRelayVLANEntry 1 } swL2DhcpLocalRelayVLANState OBJECT-TYPE SYNTAX INTEGER { other(1), disabled(2), enabled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of the DHCP relay function of the VLAN." ::= { swL2DhcpLocalRelayVLANEntry 2 } -- ******************************************************************** -- swL2PPPoEMgmt OBJECT IDENTIFIER ::= { swL2MgmtMIB 25 } -- ******************************************************************** swL2PPPoECirIDinsertState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the status of the PPPoE circuit ID insertion state of the switch." ::= { swL2PPPoEMgmt 1 } END