CXVSHELL-MIB DEFINITIONS ::= BEGIN --#CURRENT-VERSION 1 IMPORTS OBJECT-TYPE FROM RFC-1212 -- Proprietary definitions: cxMc600 FROM CXProduct-SMI; cxVShell OBJECT IDENTIFIER ::= { cxMc600 3 } -- VCE CARD TO SLOT NUMBER ASSOCIATION. voxCardsMapTable OBJECT-TYPE SYNTAX SEQUENCE OF VoxCardsMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Voice cards associations with I/O slots numbers. The voice card number corresponds to the slot number: voice card 1 is always associated with slot number 1, voice card 2 is always associated with slot number 2 and so on." ::= { cxVShell 1 } voxCardsMapEntry OBJECT-TYPE SYNTAX VoxCardsMapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each row associates a voice card number to an I/O slot number." INDEX { voxCardNo } ::= { voxCardsMapTable 1 } VoxCardsMapEntry ::= SEQUENCE { voxCardNo INTEGER, voxSlotNo INTEGER, voxConnStatus INTEGER, voxCardRowStatus INTEGER } voxCardNo OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-only STATUS mandatory DESCRIPTION "Displays the voice I/O card number that is enabled. Range of Values: a single digit from 1 to 8 Default Value: none" ::= { voxCardsMapEntry 1 } voxSlotNo OBJECT-TYPE SYNTAX INTEGER (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "Determines the I/O slot number. Range of Values: a single digit from 1 to 8 Default Value: none Configuration Changed: administrative" ::= { voxCardsMapEntry 2 } voxConnStatus OBJECT-TYPE SYNTAX INTEGER { recorded-in-config(1), failed(2), connected(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays whether a voice I/O card-to-slot number association has been successful at the VCE layer. Options: recorded-in-config (1): configuration is correct but has not yet been implemeted. System reset required. failed (2): configuration not performed correctly. The configuration may have the correct syntax but the change cannot be implemented at the VCE layer because there is no voice I/O card in the requested slot. If the requested slot is currently occupied by another kind of I/O card, for example an Ethernet card, the same result will occur. connected (3): configuration performed properly and association made. DefaultValue: none" ::= { voxCardsMapEntry 3 } voxCardRowStatus OBJECT-TYPE SYNTAX INTEGER { invalid (1), valid (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Determines the status of the objects in a table row. Options: invalid (1): row is flagged; after the next reset the values will be disabled and the row will be deleted from the table. valid (2): values are enabled. DefaultValue: none Configuration Changed: administrative" ::= { voxCardsMapEntry 4 } cxvshellMibLevel OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Used to determine current MIB module release supported by the agent. Object is in decimal." DEFVAL { 0 } --#STARTING-VERSION 1 ::= { cxVShell 2 } END