CXUserInterface-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB cxUserInterface FROM CXProduct-SMI; uiPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (6..16)) ACCESS write-only STATUS mandatory DESCRIPTION "Determines the password the system requires to allow users to gain access to the console port. You must enter this password when you are using a TTY terminal or a PC running a TTY terminal emulation program to configure the console port. Range of Values: from 6 to 16 alphanumeric characters. You can use any combination of letters and numbers, however you cannot use blank spaces. Use a dash or underscore as a delimiter. Default Value: Supervisor Configuration Changed: operative" DEFVAL { "Supervisor" } ::= { cxUserInterface 1 } uiTimeOut OBJECT-TYPE SYNTAX INTEGER (10..65535) ACCESS read-write STATUS mandatory DESCRIPTION "Determines the length of time, in seconds, the console port can remain inactive before the system logs out the user. Once the timer expires, the user needs to log in again to regain access to the console port. Range of Values: a maximum of five digits between 10 and 65535. Default Value: 600 Configuration Changed: operative" DEFVAL { 300 } ::= { cxUserInterface 2 } END