CTRON-UPS-MIB DEFINITIONS ::= BEGIN -- ctron-ups-mib.txt -- Revision: 1.03.00 -- Part Number: 2170564 -- Date: May 1, 1996 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific UPS MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 95 Cabletron Systems -- This MIB is implemented whenever a uninterruptable power -- supply is implemented. IMPORTS ctUPowerSupply FROM CTRON-MIB-NAMES OBJECT-TYPE FROM RFC-1212; ctUPS OBJECT IDENTIFIER ::= { ctUPowerSupply 1 } -- The ups group -- Implementation of this group is mandatory for devices that -- incorporate uninterruptible power supplies. ctUpsID OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following aPCModel370(257), aPCModel400(258), aPCModel600(259), aPCModel900(260), aPCModel1250(261), aPCModel2000(262), matrix3000(263), matrix5000(264), su700(265), su1400(266), su2000XL(267), aPCGeneric(268) -- Generic APC for use when APC is not -- otherwise defined. } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes a type code which refers to the manufacturers and model of the UPS." ::= { ctUPS 1 } ctUpsUpTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS deprecated DESCRIPTION "Denotes the operating time, in hours, since the UPS was last powered on." ::= { ctUPS 2 } ctUpsDisable OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS deprecated DESCRIPTION "Allows the UPS to be disabled. A set turns of the UPS for those systems, so equipped. A get/get-next always returns 0." ::= { ctUPS 3 } ctUpsDisconnect OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Allows the UPS backup power system to conserve its battery. A set turns off the power system. A get/get-next always returns a 0." ::= { ctUPS 4 } ctUpsTest OBJECT-TYPE SYNTAX INTEGER { unitOK(1), unitFailed(2), badBattery(3), noRecentTest(4), -- no test performed in the last five -- minutes underTest(5) } ACCESS read-write STATUS mandatory DESCRIPTION "Denotes the status performed on the UPS. A write initiates the test. A read indicates status of test." ::= { ctUPS 5 } ctUpsBatteryCapacity OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the percentage of battery capacity left, 100% being a fully-charged battery." ::= { ctUPS 6 } ctUpsACLineVoltsIn OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the input AC utility line voltage." ::= { ctUPS 7 } ctUpsBatteryVoltsOut OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the battery voltage." ::= { ctUPS 8 } -- Enterprise specific trap definitions -- aPCLineFail OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated in the event of an AC -- utility line failure." -- ::= 0x1101 -- -- aPCLineFailRecovery OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated when the UPS switches back -- to line, and only if the aPCLineFail trap was issued -- first." -- ::= 0x1102 -- -- aPCLowBattery OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated in the event that the UPS' -- battery is found to be low." -- ::= 0x1103 -- -- aPCLowBatteryRecovery OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated when the UPS' battery has -- charged above the low-battery point, and only if the -- aPCLowBattery trap was issued first." -- ::= 0x1104 -- -- aPCAbnormalCondition OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated in the event that the UPS -- has entered an abnormal condition, such as an -- overload or trip on low battery. This trap is also -- sent, when the UPS is first turned on." -- ::= 0x1105 -- -- aPCAbnormalConditionRecovery OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated when the UPS has recovered -- from an abnormal condition, and only if the -- aPCAb-normalCondition trap was issued first." -- ::= 0x1106 -- -- aPCShuttingDown OBJECT-TYPE -- ENTERPRISE cabletron -- DESCRIPTION -- "This trap is generated in the event that the UPS -- has been ordered to shut itself, or the load, off -- over the serial line." -- ::= 0x1107 -- -- END