CTRON-SSR-CAPACITY-MIB DEFINITIONS ::= BEGIN -- This module provides authoritative definitions for Enterasys's -- enterprise-specific Smart Switch Router specific mib branches. -- -- This module will be extended, as required. -- Enterasys Networks reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Enterasys products. -- Copyright June 1998-2000 Enterasys Networks IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue FROM SNMPv2-TC ssrMibs FROM CTRON-SSR-SMI-MIB; capacityMIB MODULE-IDENTITY LAST-UPDATED "200007150000Z" -- July 15, 2000 ORGANIZATION "Enterasys Networks, Inc." CONTACT-INFO "Enterasys Networks 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 (603) 332-9400 support@enterasys.com http://www.enterasys.com" DESCRIPTION "This module defines a schema to access RS system resource capacity statistics." REVISION "200007150000Z" DESCRIPTION "Update contact information, Change object name chassis to chassisCap due to collsion with chassis in ctron-mib-names.txt. SSR enterprise mibs apply to the Riverstone RS product line and Enterasys SSR." REVISION "9811050000Z" DESCRIPTION "Revision 1.0 Initial MIB revision." ::= { ssrMibs 270 } -- Describes the types of memory devices supported in the SSR SSRMemoryType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value, greater than zero, for each non-volatile memory device supported by the SSR series of products." SYNTAX INTEGER { cpu(1), -- Main CPU Memory intFlash(2), -- Internal Flash pcmcia(3), -- PCMCIA rmon(4), -- RMON l2Hardware(5), -- L2 Hardware Entries l3Hardware(6) -- L3 Hardware Entries } -- Describes the different capability types of the SSR chassis SSRCapabilityType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value, greater than zero, for the different capabilities of the SSR chassis." SYNTAX INTEGER { noSupport(1), -- feature not supported available(2), -- feature available but not used enabled(3), -- feature available and enabled disabled(4) -- feature available and disabled } -- Describes the different SSR firmware task states SSRStatusType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A unique value, greater than zero, for each possible state a task on the SSR can be in." SYNTAX INTEGER { ready(0), -- task sheduled and ready suspPure(1), -- task suspended by scheduler suspSleep(2), -- task suspended for idle time suspMbox(3), -- task waiting for mbox suspQue(4), -- task waiting for queue suspPipe(5), -- task suspended suspSema4(6), -- task waiting for sema4 suspEvent(7), -- task waiting for event suspPart(8), -- task suspended suspMem(9), -- task waiting for memory suspDrvr(10), -- task waiting for driver finished(11), -- task finished terminated(12) -- task terminated } -- Capacity metrics are broken down by these functional areas chassisCap OBJECT IDENTIFIER ::= { capacityMIB 1 } cpu OBJECT IDENTIFIER ::= { capacityMIB 2 } tasks OBJECT IDENTIFIER ::= { capacityMIB 3 } memory OBJECT IDENTIFIER ::= { capacityMIB 4 } -- chassisCap group: reports stats on the chassis capacity capChassisSlotCount OBJECT-TYPE SYNTAX INTEGER (2..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of slots in the chassis, including the slot for the CPU module." ::= { chassisCap 1 } capChassisSlotsUsed OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of slots used in the chassis. This number includes the slot used for the CPU module, if any." ::= { chassisCap 2 } capChassisSlotsFree OBJECT-TYPE SYNTAX INTEGER (0..32) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of free slots in the chassis. This includes all of the available slots not used by the CPU or redundant CPU card." ::= { chassisCap 3 } capChassisCPURedundancy OBJECT-TYPE SYNTAX SSRCapabilityType MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis CPU redundancy capability of the SSR. This will be one of the following values: noSupport(1) -- feature not supported available(2) -- feature not in use enabled(3) -- feature in use and enabled disabled(4) -- feature in use and disabled " ::= { chassisCap 4 } capChassisPSRedundancy OBJECT-TYPE SYNTAX SSRCapabilityType MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis Power Supply redundancy capability of the SSR. This will be one of the following values: noSupport(1) -- feature not supported available(2) -- feature not in use enabled(3) -- feature in use and enabled disabled(4) -- feature in use and disabled " ::= { chassisCap 5 } capChassisSFRedundancy OBJECT-TYPE SYNTAX SSRCapabilityType MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis Switching Fabric redundancy capability of the SSR. This will be one of the following values: noSupport(1) -- feature not supported available(2) -- feature not in use enabled(3) -- feature in use and enabled disabled(4) -- feature in use and disabled " ::= { chassisCap 6 } -- cpu group : capacity stats for CPU main memory capCPUTable OBJECT-TYPE SYNTAX SEQUENCE OF CapCPUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Summary of CPU statistics. It is assumed that there is only one CPU per line card." ::= { cpu 1 } capCPUEntry OBJECT-TYPE SYNTAX CapCPUEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing CPU statistics information." INDEX { capCPUModuleIndex } ::= { capCPUTable 1 } CapCPUEntry ::= SEQUENCE { capCPUModuleIndex INTEGER, capCPUCurrentUtilization INTEGER, capCPUL3Learned Counter32, capCPUL3Aged Counter32, capCPUL2Learned Counter32, capCPUL2Aged Counter32, capCPUNIAReceived Counter32, capCPUNIATransmitted Counter32, capCPUMinThreshold INTEGER, capCPUMaxThreshold INTEGER } capCPUModuleIndex OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Slot index in which the current CPU is residing." ::= { capCPUEntry 1 } capCPUCurrentUtilization OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The CPU utilization expressed as an integer percentage. This is calculated over the last 5 seconds at a 0.1 second interval as a simple average." ::= { capCPUEntry 2 } capCPUL3Learned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of new layer 3 flows the CPU has processed and programmed into the Layer 3 hardware flow tables. Layer 3 flows are packets for IP or IPX protocols that will be routed from one subnet to another. Bridged flows or IP and IPX flows that originate and terminate in the same subnet are accounted for by capCPUL2Learned object." ::= { capCPUEntry 3 } capCPUL3Aged OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of Layer 3flows that have been removed from the layer 3 hardware flow tables across all modules by the Layer 3 aging task. This number may increase quickly if routing protocols are not stable. Removal or insertion of routes into the forwarding table will cause premature aging of flows. Flows are normally aged/removed from the hardware when there are no more packets being sent for a defined time period. This counter is cumulative from the time the system started." ::= { capCPUEntry 4 } capCPUL2Learned OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of L2 flows or addresses learned. The intended result here is to see how many stations attempt to establish switched communication through the SSR." ::= { capCPUEntry 5 } capCPUL2Aged OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of L2 addresses or flows aged out. Hosts that end switched communication through the SSR are aged out every 15 seconds." ::= { capCPUEntry 6 } capCPUNIAReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets received by the NIA chip. This is useful in gauging how many packets are forwarded to the CPU for processing." ::= { capCPUEntry 7 } capCPUNIATransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of packets transmitted by the NIA chip. This is useful in seeing how much the CPU is communicating directory with management stations and other routers." ::= { capCPUEntry 8 } capCPUMinThreshold OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU utilization expressed as an integer percentage. This value represents the threshold minimum value for capCPUCurrentUtilization that is used to reset the threshold testing for generation of the envCPUThresholdTrap. This value is equal to 0 by default. When this value or the value of capCPUMaxThreshold is equal to 0, no envCPUThresholdTrap will be generated." ::= { capCPUEntry 9 } capCPUMaxThreshold OBJECT-TYPE SYNTAX INTEGER (0..99) MAX-ACCESS read-write STATUS current DESCRIPTION "The CPU utilization expressed as an integer percentage. This value represents the threshold maximum for capCPUCurrentUtilization which causes generation of the envCPUThresholdTrap. Another trap is not generated until the capCPUCurrentUtilization value has dropped below capCPUMinThreshold. When this value or the value of capCPUMinThreshold is equal to 0, no envCPUThresholdTrap will be generated." ::= { capCPUEntry 10 } -- tasks group : stats for tasks running on a CPU enabled module in the chassis capTaskTable OBJECT-TYPE SYNTAX SEQUENCE OF CapTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A summary of the tasks running on a CPU enabled module in the chassis." ::= { tasks 1 } capTaskEntry OBJECT-TYPE SYNTAX CapTaskEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information on a task running on a CPU enabled module in the chassis including the memory consumption and current status." INDEX { capTaskModuleIndex, capTaskIndex } ::= { capTaskTable 1 } CapTaskEntry ::= SEQUENCE { capTaskModuleIndex INTEGER, capTaskIndex INTEGER, capTaskName OCTET STRING, capTaskShed Counter32, capTaskStatus SSRStatusType, capTaskUsed INTEGER } capTaskModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The module index on which the task is running." ::= { capTaskEntry 1 } capTaskIndex OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique index assigned to a task instance. This index is unique to the task for the time SSR is booted. If the task is terminated, the index will not be reused for another task that might become active in the system." ::= { capTaskEntry 2 } capTaskName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The encrypted name assigned to this task. This is unique for each different type of task, but there may be multiple instances of the same task running in the system." ::= { capTaskEntry 3 } capTaskShed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times this task has been scheduled to run. This is a cumulative count from the time the SSR was started." ::= { capTaskEntry 4 } capTaskStatus OBJECT-TYPE SYNTAX SSRStatusType MAX-ACCESS read-only STATUS current DESCRIPTION "The current status of this task." ::= { capTaskEntry 5 } capTaskUsed OBJECT-TYPE SYNTAX INTEGER (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The size of the memory consumed by this task. This can be used to monitor any excess memory use by a particular task and is expressed in bytes." ::= { capTaskEntry 6 } -- memory group : capacity stats for Memory pools capMemoryTable OBJECT-TYPE SYNTAX SEQUENCE OF CapMemoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A summary of the non-volatile storage devices in the SSR." ::= { memory 1 } capMemoryEntry OBJECT-TYPE SYNTAX CapMemoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing information on a non-volatile memory device in the SSR." INDEX { capMemoryType, capMemoryIndex } ::= { capMemoryTable 1 } CapMemoryEntry ::= SEQUENCE { capMemoryType SSRMemoryType, capMemoryIndex INTEGER, capMemoryDescr OCTET STRING, capMemorySize INTEGER, capMemoryFree INTEGER, capMemoryUsed INTEGER, capMemoryBlockSize INTEGER, capMemoryFailures Counter32, capMemoryRemovable TruthValue } capMemoryType OBJECT-TYPE SYNTAX SSRMemoryType MAX-ACCESS not-accessible STATUS current DESCRIPTION "A type of storage device from the enumerated memory types." ::= { capMemoryEntry 1 } capMemoryIndex OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index or enumeration for the entries of a particular memory type. This index corresponds to: -- Interface index for L2Hardware Type -- Module index for L3Hardware Type -- Enumeration for everything else." ::= { capMemoryEntry 2 } capMemoryDescr OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..256)) MAX-ACCESS read-only STATUS current DESCRIPTION "The description of the memory device." ::= { capMemoryEntry 3 } capMemorySize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Memory device total memory capacity expressed in blocks." ::= { capMemoryEntry 4 } capMemoryFree OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Memory device free memory in blocks. This will include any unused memory between used memory blocks and is calculated by subtracting the memory used from the size of the memory device." ::= { capMemoryEntry 5 } capMemoryUsed OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Size of used memory on the memory device. This includes the blocks of memory that are only partially used and is expressed in blocks." ::= { capMemoryEntry 6 } capMemoryBlockSize OBJECT-TYPE SYNTAX INTEGER (1..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Size of the memory blocks on the memory device. This is the minimum block size of memory returned when memory is requested and is expressed in bytes." ::= { capMemoryEntry 7 } capMemoryFailures OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times a memory allocation in this memory device has failed. In the case of L2Hardware and L3Hardware types it expresses the number of times a Full Hash Bucket condition has been met." ::= { capMemoryEntry 8 } capMemoryRemovable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the memory type is removable." ::= { capMemoryEntry 9 } -- ### Compliance ### capConformance OBJECT IDENTIFIER ::= { capacityMIB 6 } capCompliances OBJECT IDENTIFIER ::= { capConformance 1 } capGroups OBJECT IDENTIFIER ::= { capConformance 2 } capComplianceV10 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for the SSR-CAPACITY-MIB." MODULE -- this module MANDATORY-GROUPS { capConfGroupV10 } ::= { capConfGroupV10 1 } capComplianceV20 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the SSR-CAPACITY-MIB." MODULE -- this module MANDATORY-GROUPS { capConfGroupV20 } ::= { capConfGroupV20 1 } capConfGroupV10 OBJECT-GROUP OBJECTS { capChassisSlotCount, capChassisSlotsUsed, capChassisSlotsFree, capChassisCPURedundancy, capChassisPSRedundancy, capChassisSFRedundancy, capCPUCurrentUtilization, capCPUL3Learned, capCPUL3Aged, capCPUL2Learned, capCPUL2Aged, capCPUNIAReceived, capCPUNIATransmitted, capTaskName, capTaskShed, capTaskStatus, capTaskUsed, capMemoryDescr, capMemorySize, capMemoryFree, capMemoryUsed, capMemoryBlockSize, capMemoryFailures, capMemoryRemovable } STATUS deprecated DESCRIPTION "A set of managed objects that make up version 1.0 of the SSR capacity mib." ::= { capGroups 1 } capConfGroupV20 OBJECT-GROUP OBJECTS { capChassisSlotCount, capChassisSlotsUsed, capChassisSlotsFree, capChassisCPURedundancy, capChassisPSRedundancy, capChassisSFRedundancy, capCPUCurrentUtilization, capCPUL3Learned, capCPUL3Aged, capCPUL2Learned, capCPUL2Aged, capCPUNIAReceived, capCPUNIATransmitted, capCPUMinThreshold, capCPUMaxThreshold, capTaskName, capTaskShed, capTaskStatus, capTaskUsed, capMemoryDescr, capMemorySize, capMemoryFree, capMemoryUsed, capMemoryBlockSize, capMemoryFailures, capMemoryRemovable } STATUS current DESCRIPTION "A set of managed objects that make up version 2.0 of the SSR capacity mib." ::= { capGroups 2 } END