CTRON-LINE-STATISTICS-MIB DEFINITIONS ::= BEGIN -- CTRON-LINE-STATISTICS-MIB -- Revision: x.xx.xx -- Part Number: -- Date: Sept 23, 1998 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- -- This module provides an enterprise-specific MIB. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright September 1998 Cabletron Systems IMPORTS OBJECT-TYPE FROM RFC-1212 cabletron FROM CTRON-OIDS; ctSSA OBJECT IDENTIFIER ::= { cabletron 4497 } -- ctDsx1LineStatisticsTable OBJECT IDENTIFIER ::= { ctSSA 21 } -- Cabletron Ds1 Line Statistics -- This group is optional for any platforms that have a t1 or e1 physical -- port. ctDsx1LineStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF CtDsx1LineStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of statistics gathered at Layer 1 for the installed WAN ports." ::= { ctSSA 21 } -- 1.3.6.1.4.1.52.4.2.27.21 ctDsx1LineStatisticsEntry OBJECT-TYPE SYNTAX CtDsx1LineStatisticsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of statistics gathered at Layer 1 for a given WAN port. The statistics include counts for qualified alarms and total alarms (qualified alarms and unqualified alarms). A qualified alarm is an alarm whose presence has been detected for a finite amount of time (called its integration period). An unqualified alarm is an alarm whose presence has not been detected for the entire integration period." INDEX { lsLineIndex } ::= { ctDsx1LineStatisticsTable 1 } -- 1.3.6.1.4.1.52.4.2.27.21.1 CtDsx1LineStatisticsEntry ::= SEQUENCE { lsLineIndex INTEGER, lsLayer1Up INTEGER, lsLayer1Down INTEGER, lsLayer1LOS INTEGER, lsLayer1LOF INTEGER, lsLayer1RAI INTEGER, lsLayer1AIS INTEGER, lsLayer1LOSAll INTEGER, lsLayer1LOFAll INTEGER, lsLayer1RAIAll INTEGER, lsLayer1AISAll INTEGER, lsLayer1Interrupts INTEGER, lsLayer1ClearStats INTEGER } lsLineIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The physical line index for this port." ::= { ctDsx1LineStatisticsEntry 1 } -- 1.3.6.1.4.1.52.4.2.27.21.1.1 lsLayer1Up OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has been brought up (by a higher level software entity or administrator) or has come up due to the disintegration of an alarm." ::= { ctDsx1LineStatisticsEntry 2 } -- 1.3.6.1.4.1.52.4.2.27.21.1.2 lsLayer1Down OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has been taken down (by a higher level software entity or administrator) or has gone down due to the integration of an alarm." ::= { ctDsx1LineStatisticsEntry 3 } -- 1.3.6.1.4.1.52.4.2.27.21.1.3 lsLayer1LOS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has qualified a Loss of Signal." ::= { ctDsx1LineStatisticsEntry 4 } -- 1.3.6.1.4.1.52.4.2.27.21.1.4 lsLayer1LOF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has qualified a Loss of Frame." ::= { ctDsx1LineStatisticsEntry 5 } -- 1.3.6.1.4.1.52.4.2.27.21.1.5 lsLayer1RAI OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has qualified a Remote Alarm Indication. RAI is also known as a Yellow alarm." ::= { ctDsx1LineStatisticsEntry 6 } -- 1.3.6.1.4.1.52.4.2.27.21.1.6 lsLayer1AIS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has qualified an Alarm Indication Signal. AIS is also known as a Blue alarm." ::= { ctDsx1LineStatisticsEntry 7 } -- 1.3.6.1.4.1.52.4.2.27.21.1.7 lsLayer1LOSAll OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has detected a Loss of Signal. This includes both qualified and unqualified Losses of Signal." ::= { ctDsx1LineStatisticsEntry 8 } -- 1.3.6.1.4.1.52.4.2.27.21.1.8 lsLayer1LOFAll OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has detected a Loss of Frame. This includes both qualified and unqualified Losses of Frame." ::= { ctDsx1LineStatisticsEntry 9 } -- 1.3.6.1.4.1.52.4.2.27.21.1.9 lsLayer1RAIAll OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has detected a Remote Alarm Indication. This includes both qualified and unqualified Remote Alarm Indications." ::= { ctDsx1LineStatisticsEntry 10 } -- 1.3.6.1.4.1.52.4.2.27.21.1.10 lsLayer1AISAll OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of times Layer 1 has detected an Alarm Indication Signal. This includes both qualified and unqualified Alarm Indication Signals." ::= { ctDsx1LineStatisticsEntry 11 } -- 1.3.6.1.4.1.52.4.2.27.21.1.11 lsLayer1Interrupts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of interrupts seen at Layer 1." ::= { ctDsx1LineStatisticsEntry 12 } -- 1.3.6.1.4.1.52.4.2.27.21.1.12 lsLayer1ClearStats OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When written with any value, all statistics associated with this LineIndex will be cleared." ::= { ctDsx1LineStatisticsEntry 13 } -- 1.3.6.1.4.1.52.4.2.27.21.1.13 END