-- **************************************************************************** -- -- Cluster Features -- Management Information Base for SNMP Network Management -- -- -- Copyright 1997,2003 Hewlett-Packard Development Company, L.P. -- -- Hewlett-Packard Company shall not be liable for technical or -- editorial errors or omissions contained herein. The information in -- this document is provided "as is" without warranty of any kind and -- is subject to change without notice. The warranties for HP products -- are set forth in the express limited warranty statements -- accompanying such products. Nothing herein should be construed as -- constituting an additional warranty. -- -- Confidential computer software. Valid license from HP required for -- possession, use or copying. Consistent with FAR 12.211 and 12.212, -- Commercial Computer Software, Computer Software Documentation, and -- Technical Data for Commercial Items are licensed to the U.S. -- Government under vendor's standard commercial license. -- -- Refer to the READMIB.RDM file for more information about the -- organization of the information in the Compaq Enterprise. -- -- The Compaq Enterprise number is 232. -- The ASN.1 prefix to, and including the Compaq Enterprise is: -- 1.3.6.1.4.1.232 -- -- **************************************************************************** CPQCLUSTER-MIB DEFINITIONS ::= BEGIN IMPORTS DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212 TRAP-TYPE FROM RFC-1215 sysName FROM RFC1213-MIB compaq FROM CPQHOST-MIB cpqHoTrapFlags FROM CPQHOST-MIB; -- compaq OBJECT IDENTIFIER ::= { enterprises 232 } cpqCluster OBJECT IDENTIFIER ::= { compaq 15 } cpqClusterMibRev OBJECT IDENTIFIER ::= { cpqCluster 1 } cpqClusterComponent OBJECT IDENTIFIER ::= { cpqCluster 2 } cpqClusterTrap OBJECT IDENTIFIER ::= { cpqCluster 3 } cpqClusterInterface OBJECT IDENTIFIER ::= { cpqClusterComponent 1 } cpqClusterInfo OBJECT IDENTIFIER ::= { cpqClusterComponent 2 } cpqClusterNode OBJECT IDENTIFIER ::= { cpqClusterComponent 3 } cpqClusterResource OBJECT IDENTIFIER ::= { cpqClusterComponent 4 } cpqClusterInterconnect OBJECT IDENTIFIER ::= { cpqClusterComponent 5 } cpqClusterNetwork OBJECT IDENTIFIER ::= { cpqClusterComponent 6 } cpqClusterOsCommon OBJECT IDENTIFIER ::= { cpqClusterInterface 4 } -- **************************************************************************** -- Cluster Information MIB Revision -- ==================================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterMibRev Group (1.3.6.1.4.1.232.15.1) -- -- Implementation of the cpqClusterMibRev group is mandatory for all agents -- supporting the Cluster MIB. -- -- An Insight Agent conforming to this document will return a -- cpqClusterMibRevMajor of one (1) and a cpqClusterMibRevMinor of three (3). -- -- **************************************************************************** cpqClusterMibRevMajor OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of the supported information. Correct interpretation of data may require a MIB document with the same major revision level." ::= { cpqClusterMibRev 1 } cpqClusterMibRevMinor OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred." ::= { cpqClusterMibRev 2 } cpqClusterMibCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The overall condition of the cluster represented by this MIB. This variable is the same as cpqClusterCondition in the Cluster Info Group. It is a combination of the Cluster node conditions, the resource conditions, and the network conditions as defined later in the Cluster Node group the Cluster Resource group, and the Cluster Network group. other(1) The cluster condition can not be determined. Every node condition, resource condition, and network condition is undetermined. ok(2) The cluster condition is functioning normally. Every node condition, resource condition, and network condition is ok. degraded(3) The cluster condition is degraded if at least one node condition is failed or degraded or at least one resource condition, or one network condition is degraded. failed(4) The cluster condition is failed if every node condition is failed, or at least one resource condition is failed, or at least one network condition is failed." ::= { cpqClusterMibRev 3 } -- **************************************************************************** -- Cluster OS Common -- ======================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterInterface Group (1.3.6.1.4.1.232.15.2.1) -- cpqClusterOsCommon Group (1.3.6.1.4.1.232.15.2.1.4) -- -- -- Implementation of the cpqClusterOsCommon group is mandatory for all -- agents that support the Cluster MIB. -- -- **************************************************************************** cpqClusterOsCommonPollFreq OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management station, it does not poll the device driver at a specific interval. If the poll frequency is zero (0) all attempts to write to this object will fail. If the poll frequency is non-zero, setting this value will change the polling frequency of the Insight Agent. Setting the poll frequency to zero (0) will always fail, an agent may also choose to fail any request to change the poll frequency to a value that would severely impact system performance." ::= { cpqClusterOsCommon 1 } -- **************************************************************************** -- Cluster OS Common Module Table -- ===================================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterInterface Group (1.3.6.1.4.1.232.15.2.1) -- cpqClusterOsCommon Group (1.3.6.1.4.1.232.15.2.1.4) -- cpqClusterOsCommonModuleTable (1.3.6.1.4.1.232.15.2.1.4.2) deprecated -- -- **************************************************************************** cpqClusterOsCommonModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqClusterOsCommonModuleEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A table of software modules that provide an interface to the device this MIB describes." ::= { cpqClusterOsCommon 2 } cpqClusterOsCommonModuleEntry OBJECT-TYPE SYNTAX CpqClusterOsCommonModuleEntry ACCESS not-accessible STATUS deprecated DESCRIPTION "A description of a software module that provides an interface to the device this MIB describes." INDEX { cpqClusterOsCommonModuleIndex } ::= { cpqClusterOsCommonModuleTable 1 } CpqClusterOsCommonModuleEntry ::= SEQUENCE { cpqClusterOsCommonModuleIndex INTEGER, cpqClusterOsCommonModuleName DisplayString, cpqClusterOsCommonModuleVersion DisplayString, cpqClusterOsCommonModuleDate OCTET STRING, cpqClusterOsCommonModulePurpose DisplayString } cpqClusterOsCommonModuleIndex OBJECT-TYPE SYNTAX INTEGER (0..255) ACCESS read-only STATUS deprecated DESCRIPTION "A unique index for this module description." ::= { cpqClusterOsCommonModuleEntry 1 } cpqClusterOsCommonModuleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS deprecated DESCRIPTION "The module name." ::= { cpqClusterOsCommonModuleEntry 2 } cpqClusterOsCommonModuleVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS deprecated DESCRIPTION "The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be null (size 0) string if the agent cannot provide the module version." ::= { cpqClusterOsCommonModuleEntry 3 } cpqClusterOsCommonModuleDate OBJECT-TYPE SYNTAX OCTET STRING (SIZE (7)) ACCESS read-only STATUS deprecated DESCRIPTION "The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 5 hour 0..23 5 6 minute 0..59 6 7 second 0..60 (use 60 for leap-second) This field will be set to year = 0 if the agent cannot provide the module date. The hour, minute, and second field will be set to zero (0) if they are not relevant. The year field is set with the most significant octet first." ::= { cpqClusterOsCommonModuleEntry 4 } cpqClusterOsCommonModulePurpose OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS deprecated DESCRIPTION "The purpose of the module described in this entry." ::= { cpqClusterOsCommonModuleEntry 5 } -- **************************************************************************** -- Cluster Info Group -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterInfo Group (1.3.6.1.4.1.232.15.2.2) -- -- The cpqClusterInfo group contains the general information about the -- cluster. -- -- Implementation of the cpqClusterInfo group is mandatory for all agents -- that support the Cluster MIB. -- -- **************************************************************************** cpqClusterName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the cluster." ::= { cpqClusterInfo 1 } cpqClusterCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The cluster condition as reported by this node. It is a combination of the Cluster node conditions, resource conditions, and network conditions as defined later in the Cluster Node group, Cluster Resource group, and Cluster Network group. other(1) The cluster condition can not be determined. Every node condition, resource condition, and network condition is undetermined. ok(2) The cluster condition is functioning normally. Every node condition, resource condition, and network condition is ok. degraded(3) The cluster condition is degraded if at least one node condition is failed or degraded or at least one resource condition, or one network condition is degraded. failed(4) The cluster condition is failed if every node condition is failed, or at least one resource condition is failed, or at least one network condition is failed." ::= { cpqClusterInfo 2 } cpqClusterIpAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The first cluster static IP address enumerated. This cluster IP address and any other cluster IP address are in the Cluster Resource Group with the resource type 'IP Address'." ::= { cpqClusterInfo 3 } cpqClusterQuorumResource OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Quorum resource name for the cluster. This number is the index into the resource table which contains the Quorum resource. -1 No Quorum resource available. 0..64 Index into the resource table." ::= { cpqClusterInfo 4 } cpqClusterMajorVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the major version number of the cluster software." ::= { cpqClusterInfo 5 } cpqClusterMinorVersion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the minor version number of the cluster software." ::= { cpqClusterInfo 6 } cpqClusterCSDVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The latest Service Pack installed on the system. If no Service Pack has been installed, the string is empty." ::= { cpqClusterInfo 7 } cpqClusterVendorId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The cluster software vendor identifier information." ::= { cpqClusterInfo 8 } cpqClusterResourceAggregateCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The cluster resource aggregate condition as reported by this node. This condition is derived directly from each and every Cluster resource condition as defined later in the Cluster Resource group. other(1) The condition can not be determined, which equates to each and every resource condition as undetermined. ok(2) The condition is functioning normally, which equates to each and every resource condition as ok. degraded(3) The condition is degraded if at least one resource condition is degraded. failed(4) The condition is failed if at least one resource condition is failed." ::= { cpqClusterInfo 9 } cpqClusterNetworkAggregateCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The cluster network aggregate condition as reported by this node. This condition is derived directly from the condition of each Cluster network with a role of internal, or clientAndInternal or client as defined later in the Cluster Network group. Networks with a role of none are not considered in overall condition. other(1) The condition can not be determined, all network conditions are undetermined. ok(2) The condition is functioning normally, which equates to each and every network condition as ok. degraded(3) The condition is degraded if at least one network condition is degraded. failed(4) The condition is failed if at least one network condition is failed." ::= { cpqClusterInfo 10 } -- **************************************************************************** -- Cluster Node Group -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterNode Group (1.3.6.1.4.1.232.15.2.3) -- -- The cpqClusterNode group contains information about the nodes in a -- cluster. A node is a server running the cluster software. A node is -- responsible for hosting a number of cluster resources. A node shares -- storage with the other nodes in the cluster. -- -- Implementation of the cpqClusterNode group is mandatory for all agents -- that support the Cluster MIB. -- -- **************************************************************************** cpqClusterNodeTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqClusterNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of cluster node entries." ::= { cpqClusterNode 1 } cpqClusterNodeEntry OBJECT-TYPE SYNTAX CpqClusterNodeEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A description of a cluster node" INDEX { cpqClusterNodeIndex } ::= { cpqClusterNodeTable 1 } CpqClusterNodeEntry ::= SEQUENCE { cpqClusterNodeIndex INTEGER, cpqClusterNodeName DisplayString, cpqClusterNodeStatus INTEGER, cpqClusterNodeCondition INTEGER } cpqClusterNodeIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for this node entry." ::= { cpqClusterNodeEntry 1 } cpqClusterNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the node." ::= { cpqClusterNodeEntry 2 } cpqClusterNodeStatus OBJECT-TYPE SYNTAX INTEGER { other(1), nodeUp(2), nodeDown(3), nodePaused(4), nodeJoining(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The current status of the node. The following values are defined: other(1) - Indicates that an error has occurred and the exact state of the node could not be determined, or the node status is unavailable. nodeUp(2) - The node is operating as an active member of a cluster. A node that is up responds to updates to the cluster database, can host and manage groups, and can maintain communication with other nodes in the cluster. nodeDown(3) - The node is trying to form or rejoin a cluster or is down. A node that is down is not an active cluster member and it may or may not be running. The Cluster Service may have started and then failed, or may have failed to start completely. nodePaused(4) - The node is operating as an active member of a cluster but cannot host any resources or resource groups,is up but cluster activity is paused. Nodes that are undergoing maintenance are typically placed in this state. nodeJoining(5) - The node is in the process of joining a cluster. This is a short lived state." ::= { cpqClusterNodeEntry 3 } cpqClusterNodeCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The current condition of the node. The following values are defined: other(1) - The node status is unavailable, or could not be determined. ok(2) - The node status is nodeUp. degraded(3) - The node status is nodeUnavailable or nodePaused or nodeJoining. failed(4) - The node status is nodeDown." ::= { cpqClusterNodeEntry 4 } -- **************************************************************************** -- Cluster Resource Group -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterResource Group (1.3.6.1.4.1.232.15.2.4) -- -- The cpqClusterResource group contains information about the resources in a -- cluster. A cluster resource is any physical or logical entity that is -- used to provide a service to clients of the cluster, such as an application -- or SCSI-attached disk. A resource is the basic unit of fail-over in a -- cluster. -- -- Implementation of the cpqClusterResource group is mandatory for all agents -- that support the Cluster MIB. -- -- **************************************************************************** cpqClusterResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqClusterResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of resources managed by the cluster reported by this MIB." ::= { cpqClusterResource 1 } cpqClusterResourceEntry OBJECT-TYPE SYNTAX CpqClusterResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The properties describing a resource managed by the cluster." INDEX { cpqClusterResourceIndex } ::= { cpqClusterResourceTable 1 } CpqClusterResourceEntry ::= SEQUENCE { cpqClusterResourceIndex INTEGER, cpqClusterResourceName DisplayString, cpqClusterResourceType DisplayString, cpqClusterResourceState INTEGER, cpqClusterResourceOwnerNode DisplayString, cpqClusterResourcePhysId DisplayString, cpqClusterResourceCondition INTEGER, cpqClusterResourceDriveLetter DisplayString, cpqClusterResourceIpAddress DisplayString, cpqClusterResourceGroupName DisplayString } cpqClusterResourceIndex OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "A unique index for this resource entry." ::= { cpqClusterResourceEntry 1 } cpqClusterResourceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the resource. It must be unique within the cluster." ::= { cpqClusterResourceEntry 2 } cpqClusterResourceType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The resource type, such as 'Physical Disk', 'Generic Application', 'IP Address', 'File Share', 'Network Name', etc.." ::= { cpqClusterResourceEntry 3 } cpqClusterResourceState OBJECT-TYPE SYNTAX INTEGER { other(1), online(2), offline(3), failed(4), onlinePending(5), offlinePending(6) } ACCESS read-only STATUS mandatory DESCRIPTION "The resource's current state. The following values are defined: other(1) - Indicates that an error has occurred and the exact state of the resource could not be determined or the resource state is unavailable. online(2) - The resource is online and functioning normally. offline(3) - The resource is offline. failed(4) - The resource has failed. onlinePending(5) - The resource is in the process of coming online. offlinePending(6)- The resource is in the process of going offline." ::= { cpqClusterResourceEntry 4 } cpqClusterResourceOwnerNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The node in the cluster where the group of the resource is currently online." ::= { cpqClusterResourceEntry 5 } cpqClusterResourcePhysId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The physical identification for resource type 'Physical Disk'. It contains the following components: storage box name, logical drive NN. where NN is a number from 0..n. It is blank for all other resource types." ::= { cpqClusterResourceEntry 6 } cpqClusterResourceCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The resource condition. The following values are defined: other(1) - Unable to determine the resource condition. ok(2) - The resource status is online. degraded(3) - The resource status is unavailable or offline or online pending or offline pending. failed(4) - The resource status is failed." ::= { cpqClusterResourceEntry 7 } cpqClusterResourceDriveLetter OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The drive letter with semi-colon of a physical disk such as x:. Blank if the resource type is not 'Physical Disk'." ::= { cpqClusterResourceEntry 8 } cpqClusterResourceIpAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "A cluster IP address expressed as xxx.xxx.xxx.xxx where xxx is a decimal number between 0 and 255. Blank if the resource type is not 'IP Address'." ::= { cpqClusterResourceEntry 9 } cpqClusterResourceGroupName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the cluster group that the resource belongs to." ::= { cpqClusterResourceEntry 10 } -- **************************************************************************** -- Cluster Interconnect Group -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterInterconnect Group (1.3.6.1.4.1.232.15.2.5) -- -- The cpqClusterInterconnect group describes the physical hardware used -- by the node to communicate with the other nodes in the cluster. -- -- Implementation of the cpqClusterInterconnect group is mandatory for all -- agents that support the Cluster MIB. -- -- **************************************************************************** cpqClusterInterconnectTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqClusterInterconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of network interfaces used by the node for communication." ::= { cpqClusterInterconnect 1 } cpqClusterInterconnectEntry OBJECT-TYPE SYNTAX CpqClusterInterconnectEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The properties describing the interconnect." INDEX { cpqClusterInterconnectIndex } ::= { cpqClusterInterconnectTable 1 } CpqClusterInterconnectEntry ::= SEQUENCE { cpqClusterInterconnectIndex INTEGER, cpqClusterInterconnectPhysId DisplayString, cpqClusterInterconnectTransport DisplayString, cpqClusterInterconnectAddress DisplayString, cpqClusterInterconnectNetworkName DisplayString, cpqClusterInterconnectNodeName DisplayString, cpqClusterInterconnectRole INTEGER } cpqClusterInterconnectIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the interconnect entry." ::= { cpqClusterInterconnectEntry 1 } cpqClusterInterconnectPhysId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The physical identification of the device. For an embedded NIC the value format is as followed: 1) for embedded NIC, Embedded NIC, Base I/O Addr: 2) Known slot number, Slot: , Base I/O Addr: 3) Unknown slot number, Slot: unknown, Base I/O Addr: " ::= { cpqClusterInterconnectEntry 2 } cpqClusterInterconnectTransport OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The network transport used by the interconnect. For example, Tcpip." ::= { cpqClusterInterconnectEntry 3 } cpqClusterInterconnectAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The address used by the interconnect expressed in the format specified by the transport type." ::= { cpqClusterInterconnectEntry 4 } cpqClusterInterconnectNetworkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "This interconnect is a part of this network. The network name is used to correlate information in the network table." ::= { cpqClusterInterconnectEntry 5 } cpqClusterInterconnectNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The name of the node in which the network interface is installed." ::= { cpqClusterInterconnectEntry 6 } cpqClusterInterconnectRole OBJECT-TYPE SYNTAX INTEGER { none(1), client(2), internal(3), clientAndInternal(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The communications role of the interconnect in the cluster. The following values are defined: none(1) - The interconnect is not used by the cluster. client(2) - The interconnect is used to connect client systems to the cluster. internal(3) - The interconnect is used to carry internal cluster communication. clientAndInternal(4) - The interconnect is used to connect client systems and for internal cluster communication." ::= { cpqClusterInterconnectEntry 7 } -- **************************************************************************** -- Cluster Network Group -- =============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- cpqCluster Group (1.3.6.1.4.1.232.15) -- cpqClusterComponent Group (1.3.6.1.4.1.232.15.2) -- cpqClusterNetwork Group (1.3.6.1.4.1.232.15.2.6) -- -- The cpqClusterNetwork group describes all of the networks available for -- communication with the other nodes in the cluster or clients attached -- the to node. The entries in the table are the properties obtained when -- enumerating the cluster networks except for state and condition. -- -- Implementation of the cpqClusterNetwork group is mandatory for all -- agents that support the Cluster MIB. -- -- **************************************************************************** cpqClusterNetworkTable OBJECT-TYPE SYNTAX SEQUENCE OF CpqClusterNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of networks available for communication with other nodes or clients." ::= { cpqClusterNetwork 1 } cpqClusterNetworkEntry OBJECT-TYPE SYNTAX CpqClusterNetworkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The properties describing the network." INDEX { cpqClusterNetworkIndex } ::= { cpqClusterNetworkTable 1 } CpqClusterNetworkEntry ::= SEQUENCE { cpqClusterNetworkIndex INTEGER, cpqClusterNetworkName DisplayString, cpqClusterNetworkAddressMask DisplayString, cpqClusterNetworkDescription DisplayString, cpqClusterNetworkRole INTEGER, cpqClusterNetworkState INTEGER, cpqClusterNetworkCondition INTEGER } cpqClusterNetworkIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely identifies the network entry." ::= { cpqClusterNetworkEntry 1 } cpqClusterNetworkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The text name of the network." ::= { cpqClusterNetworkEntry 2 } cpqClusterNetworkAddressMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) ACCESS read-only STATUS mandatory DESCRIPTION "The network IP address mask expressed as xxx.xxx.xxx.xxx where xxx is a decimal number between 0 and 255." ::= { cpqClusterNetworkEntry 3 } cpqClusterNetworkDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "The text description of the network." ::= { cpqClusterNetworkEntry 4 } cpqClusterNetworkRole OBJECT-TYPE SYNTAX INTEGER { none(1), client(2), internal(3), clientAndInternal(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The communications role of the network in the cluster. The following values are defined: none(1) - The network is not used by the cluster. client(2) - The network is used to connect client systems to the cluster. internal(3) - The network is used to carry internal cluster communication. clientAndInternal(4) - The network is used to connect client systems and for internal cluster communication." ::= { cpqClusterNetworkEntry 5 } cpqClusterNetworkState OBJECT-TYPE SYNTAX INTEGER { other(1), online(2), offline(3), partitioned(4), unavailable(5) } ACCESS read-only STATUS mandatory DESCRIPTION "The network's current state. The following values are defined: other(1) - Indicates that an error has occurred and the exact state of the network could not be determined. online(2) - The network is operational; all of the nodes in the cluster can communicate. offline(3) - The network is not operational; none of the nodes on the network can communicate. partitioned(4) - The network is operational, but two or more nodes on the network cannot communicate. Typically a path-specific problem has occurred. unavailable(5) - The network is unavailable to the cluster because the network's role is 'none'." ::= { cpqClusterNetworkEntry 6 } cpqClusterNetworkCondition OBJECT-TYPE SYNTAX INTEGER { other(1), ok(2), degraded(3), failed(4) } ACCESS read-only STATUS mandatory DESCRIPTION "The network condition uses cpqClusterNetworkState to determine the network condition. The following values are defined: other(1) - The network state indicates that an error has occurred and the exact state of the network could not be determined or the network state is unavailable. ok(2) - The network state is online or unavailable. degraded(3) - The network state is partitioned. failed(4) - The network state is offline." ::= { cpqClusterNetworkEntry 7 } -- **************************************************************************** -- Cluster Trap Definition -- ============================== -- -- The compaq enterprise (1.3.6.1.4.1.232) -- -- The SNMP trap messages must not be bigger than 484 octets (bytes). -- -- Trap support in an SNMP agent implementation is optional. An SNMP -- agent implementation may support all, some, or none of the traps. -- If traps are supported, the user should be provided with the option of -- disabling traps. -- -- **************************************************************************** -- The following 2 traps are deprecated cpqClusterDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterName } DESCRIPTION "This trap will be sent any time the condition of the cluster becomes degraded." --#TYPE "Cluster Degraded (15001)" --#SUMMARY "Cluster %s has become degraded." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 15001 cpqClusterFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterName } DESCRIPTION "This trap will be sent any time the condition of the cluster becomes failed." --#TYPE "Cluster Failed (15002)" --#SUMMARY "Cluster %s has failed." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE FAILED ::= 15002 -- The above trap definitions 15001 & 15002 are deprecated in release 4.20. -- Traps in version 4.20 and greater have the new traps below to indicate what -- resource or node is degraded or what resource or node has failed. cpqClusterNodeDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterNodeName } DESCRIPTION "This trap will be sent any time the condition of a node in the cluster becomes degraded. User Action: Make a note of the cluster node name then check the node for the cause of the degraded condition." --#TYPE "Cluster Node Degraded (15003)" --#SUMMARY "Cluster service on %s has become degraded." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 15003 cpqClusterNodeFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterNodeName } DESCRIPTION "This trap will be sent any time the condition of a node in the cluster becomes failed. User Action: Make a note of the cluster node name then check the node for the cause of the failure." --#TYPE "Cluster Node Failed (15004)" --#SUMMARY "Cluster service on %s has failed." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE FAILED ::= 15004 cpqClusterResourceDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterResourceName } DESCRIPTION "This trap will be sent any time the condition of a cluster resource becomes degraded. User Action: Make a note of the cluster resource name then check the resource for the cause of the degraded condition." --#TYPE "Cluster Resource Degraded (15005)" --#SUMMARY "Cluster resource %s has become degraded." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 15005 cpqClusterResourceFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterResourceName } DESCRIPTION "This trap will be sent any time the condition of a cluster resource becomes failed. User Action: Make a note of the cluster resource name then check the resource for the cause of the failure." --#TYPE "Cluster Resource Failed (15006)" --#SUMMARY "Cluster resource %s has failed." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE FAILED ::= 15006 cpqClusterNetworkDegraded TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterNetworkName } DESCRIPTION "This trap will be sent any time the condition of a cluster network becomes degraded. User Action: Make a note of the cluster network name then check the network for the cause of the degraded condition." --#TYPE "Cluster Network Degraded (15007)" --#SUMMARY "Cluster network %s has become degraded." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE DEGRADED ::= 15007 cpqClusterNetworkFailed TRAP-TYPE ENTERPRISE compaq VARIABLES { sysName, cpqHoTrapFlags, cpqClusterNetworkName } DESCRIPTION "This trap will be sent any time the condition of a cluster network becomes failed. User Action: Make a note of the cluster network name then check the network for the cause of the failure." --#TYPE "Cluster Network Failed (15008)" --#SUMMARY "Cluster network %s has failed." --#ARGUMENTS {2} --#SEVERITY MAJOR --#TIMEINDEX 99 --#STATE FAILED ::= 15008 END