CISCOSB-Redistribute DEFINITIONS ::= BEGIN -- Title: CISCOSB Redistribute table -- Version: 7.60.00.00 -- Date: 14 Jun 2011 IMPORTS ipSpec FROM CISCOSB-IP MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, TEXTUAL-CONVENTION FROM SNMPv2-TC; -- Textual conventions RlRedistSrcProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Source Protocol this defines the list of sources that redistribute their routes " SYNTAX INTEGER { rlRedistProtocolConnected(1), -- directly connected routes rlRedistProtocolStatic(2), -- statically defined routes rlRedistProtocolRip(3), -- RIP rlRedistProtocolOspfv2(4), -- OSPFv2 rlRedistProtocolOspfv3(5), -- OSPFv3 rlRedistProtocolBgp(6), -- BGP rlRedistProtocolEigrp(7), -- EIGRP rlRedistProtocolIsIs(8), -- Is-Is rlRedistProtocolMobile(9), -- Mobile rlRedistProtocolAll(10) -- all routes } RlRedistDstProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Destination Protocol" SYNTAX INTEGER { rlRedistProtocolRip(3), -- RIP rlRedistProtocolOspfv2(4), -- OSPFv2 rlRedistProtocolOspfv3(5), -- OSPFv3 rlRedistProtocolBgp(6), -- BGP rlRedistProtocolEigrp(7), -- EIGRP rlRedistProtocolIsIs(8), -- Is-Is rlRedistProtocolMobile(9) -- Mobile } RlRedistMatchType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Match Type Bit Map that defines the criteria by which OSPF routes are redistributed into other routing domains." SYNTAX INTEGER { rlRedistMatchTypeNone(0), -- don't filter according to path type rlRedistMatchTypeInternal(1), -- Routes that are internal to a specific autonomous system. rlRedistMatchTypeExternalOne(2),-- Routes that are external to the autonomous system, but are imported into OSPF as Type 1 external route. rlRedistMatchTypeExternalTwo(3) -- Routes that are external to the autonomous system, but are imported into OSPF as Type 2 external route. } RlRedistMetricType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Metric Type" SYNTAX INTEGER { rlRedistMetricTypeNone(0), -- no metric defined rlRedistMetricTypeExternalOne(1), -- type 1 external rlRedistMetricTypeExternalTwo(2) -- type 2 external } -- RlRedistLevel ::= TEXTUAL-CONVENTION -- STATUS current -- DESCRIPTION "IS-IS Level" -- SYNTAX INTEGER { -- rlRedistLevelNone(0) no level defined -- rlRedistLevelOne(1), level-1 -- rlRedistLevelOneTwo(2), level-1-2 -- rlRedistLevelTwo(3), Level-2 -- } -- ------------------------------------------------------------------------------- rlRedistribute OBJECT IDENTIFIER ::= { ipSpec 27 } rlRedistTable OBJECT-TYPE SYNTAX SEQUENCE OF RlRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Using a routing protocol to advertise routes that are learned by some other means, such as by another routing protocol, static routes, or directly connected routes, is called redistribution. This table is used to configure under which conditions will redistribution occur and which actions (if any) should be done on redistributed route." ::= { rlRedistribute 1 } RlRedistEntry ::= SEQUENCE { rlRedistDstProtocol RlRedistDstProtocol, -- destination protocol rlRedistSrcProtocol RlRedistSrcProtocol, -- source protocol rlRedistDstProcessId INTEGER, -- Destination process ID rlRedistSrcProcessId INTEGER, -- Source process ID rlRedistMatchType RlRedistMatchType, -- match type rlRedistRoutMapName DisplayString, -- rout map tag (name) rlRedistAsNumber INTEGER, -- Autonomous System Number rlRedistMetricTransparent TruthValue, -- redistribute with same metric rlRedistMetricValue INTEGER, -- if not transparent, which metric to use rlRedistMetricType RlRedistMetricType, -- metric type rlRedistSubnets TruthValue, -- if FALSE: When routes are redistributed into OSPF, only routes that are not subnetted are redistributed rlRedistOnlyNSSA TruthValue, -- Sets the nssa-only attribute for all routes redistributed into OSPF rlRedistRowStatus RowStatus -- Row Status -- rlRedistISISProcessId DisplayString IS-IS process ID -- rlRedistLevel RlRedistLevel, Level (Is-Is only) -- rlRedistTagValue INTEGER, Tag Value, 0 means no tag } rlRedistEntry OBJECT-TYPE SYNTAX RlRedistEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "." INDEX { rlRedistDstProtocol, rlRedistSrcProtocol, rlRedistDstProcessId, rlRedistSrcProcessId, rlRedistMatchType, rlRedistRoutMapName } ::= { rlRedistTable 1} rlRedistDstProtocol OBJECT-TYPE SYNTAX RlRedistDstProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol to which the routes are exported to" ::= { rlRedistEntry 1 } rlRedistSrcProtocol OBJECT-TYPE SYNTAX RlRedistSrcProtocol MAX-ACCESS not-accessible STATUS current DESCRIPTION "The protocol from which the routes are imported from" ::= { rlRedistEntry 2 } rlRedistDstProcessId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameter semantic differs according to rlRedistDstProtocol. in OSPF this is an appropriate OSPF process ID to which routes are to be redistributed" ::= { rlRedistEntry 3 } rlRedistSrcProcessId OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Parameter semantic differs according to rlRedistSrcProtocol. in BGP and EIGRP keyword, this is an autonomous system number, in range 1 to 65535.. in OSPF, this is an appropriate OSPF process ID from which routes are to be redistributed. 0 means no process ID" ::= { rlRedistEntry 4 } rlRedistMatchType OBJECT-TYPE SYNTAX RlRedistMatchType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Applicable only when rlRedistSrcProtocol is OSPF defines the criteria by which OSPF routes are redistributed into other routing domains. It can be one of the following: rlRedistMatchTypeInternal - Routes that are internal to a specific autonomous system. rlRedistMatchTypeExternalTwo - Routes that are external to the autonomous system, but are imported into OSPF as Type 2 external route. rlRedistMatchTypeExternalOne - Routes that are external to the autonomous system, but are imported into OSPF as Type 1 external route." ::= { rlRedistEntry 5 } rlRedistRoutMapName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the route map that should be interrogated to filter the importation of routes from this source routing protocol to the current routing protocol. If not specified, all routes are redistributed. If this keyword is specified, but no route map tags are listed, no routes will be imported." ::= { rlRedistEntry 6 } rlRedistAsNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-write STATUS current DESCRIPTION "Autonomous system number for the redistributed route. Number in range from 1 to 65535. 0 means no AS number defined" DEFVAL {0} ::= { rlRedistEntry 7} rlRedistMetricTransparent OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Redistribute routes without changing the metric" DEFVAL {true} ::= { rlRedistEntry 8 } rlRedistMetricValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "When redistributing from one OSPF process to another OSPF process on the same router, the metric will be carried through from one process to the other if no metric value is specified. When redistributing other processes to an OSPF process, the default metric is 20 when no metric value is specified." DEFVAL {0} ::= { rlRedistEntry 9 } rlRedistMetricType OBJECT-TYPE SYNTAX RlRedistMetricType MAX-ACCESS read-write STATUS current DESCRIPTION "Parameter semantic differs according to rlRedistSrcProtocol. In OSPF specifies the external link type associated with the default route advertised into the OSPF routing domain. It can be one of two values: 1 - Type 1 external route 2 - Type 2 external route" ::= { rlRedistEntry 10} rlRedistSubnets OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "For redistributing routes into OSPF, the scope of redistribution for the specified protocol" DEFVAL {false} ::= { rlRedistEntry 11 } rlRedistOnlyNSSA OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Sets the nssa-only attribute for all routes redistributed into OSPF." DEFVAL {false} ::= { rlRedistEntry 12 } rlRedistRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Row Status" ::= { rlRedistEntry 13 } END -- rlRedistISISProcessId OBJECT-TYPE -- SYNTAX DisplayString -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "In IS-IS, this is an optional tag value that defines a meaningful name for a routing process." -- ::= { rlRedistEntry 15 } -- rlRedistLevel OBJECT-TYPE -- SYNTAX RlRedistLevel -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "In IS-IS -- level-1: Level 1 routes are redistributed into other IP routing protocols independently. -- level-1-2: both Level 1 and Level 2 routes are redistributed into other IP routing protocols. -- level-2: Level 2 routes are redistributed into other IP routing protocols independently." -- DEFVAL {rlRedistLevelNone} -- ::= { rlRedistEntry 16 } -- rlRedistTagValue OBJECT-TYPE -- SYNTAX INTEGER -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION "Specifies the 32-bit decimal value attached to each external route. -- This is not used by OSPF itself. -- It may be used to communicate information between Autonomous System Boundary Routers (ASBRs). -- If none is specified, then the remote autonomous system number is used for routes from -- Border Gateway Protocol (BGP) and Exterior Gateway Protocol (EGP); -- for other protocols, zero (0) is used" -- DEFVAL {0} -- ::= { rlRedistEntry 17 }