CISCOSB-QOS-CLI-MIB DEFINITIONS ::= BEGIN -- Version: 7.46 -- Date: 04 Jan 2007 -- 28 May 2003 Changed UNITS clause of rlQosPolicerCir to kbps -- 28 May 2003 Added QoS Access Control Element table two indexes (rlQosAceTidxTable) -- 29 Sep 2003 Add textual convention to QosObjectMode (service). -- 15 Nov 2004 Add DSCP to Queue Default map table -- 27 Jan 2005 Add new advanced action : trustCosDscp -- 07 Feb 2005 Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType -- Add ip-ICMP,ip-IGMP To AceObjectType -- Add vpt,ethertype To ClassOffsetType -- 14 March 2005 Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit -- to rlQosIfPolicyTable -- 17-Apr-2005 Added rlQosDscpToDpTable -- 06-Apr-2006 Added branch rlQosStatistics and tables: -- 08-May-2006 Added innerVlan to ClassOffsetType And inner-vlan to ClassTupleType -- 11-Dec-2006 Added rlQosClassifierUtilization -- 24-Dec-2006 Changed rlQosTypeQueue1 ... rlQosTypeQueue8 fields in -- rlQosQueueProfileTable from read-create to read-write -- 24-Dec-2006 Added new MIB: rlQosPortToProfileMappingTable -- 31-Dec-2006 Added support for Time Based ACL -- 04-Jan-2007 Added rlQosTimeBasedAclTable -- 17-Apr-2007 Added IPv6 ACL support -- Change rlQosOffsetTable to deprecated -- 6-Jun-2007 Added rlQosClassifierUtilizationSystem -- 18-Jan-2008 Add rlQosClassifierUtilizationRulesNumber to rlQosClassifierUtilizationEntry -- 01-Jun-2009 Add udp-port-range-start-src, udp-port-range-end-src, -- udp-port-range-start-dest, udp-port-range-end-dest, -- tcp-port-range-start-src, tcp-port-range-end-src, -- tcp-port-range-start-dest, tcp-port-range-end-dest, to ClassTupleType -- Add rlQosAceTidxTuple9, rlQosAceTidxTuple10 to rlQosAceTidxTable -- 18-Aug-2009 Removed Time Based Tables : code moved to general TimeBasedInfrastrucure -- 22-Oct-2009 Added rlQosAceTidxTuple11 to rlQosAceTidxTable in order to keep Src MAC addr of Dynamic ACLs IMPORTS MODULE-IDENTITY, OBJECT-TYPE,Counter32, Gauge32, Unsigned32, IpAddress, TimeTicks FROM SNMPv2-SMI InterfaceIndex,InterfaceIndexOrZero FROM IF-MIB TruthValue, RowStatus, RowPointer, TEXTUAL-CONVENTION,DisplayString FROM SNMPv2-TC Counter64, OBJECT-TYPE FROM SNMPv2-SMI PortList,VlanId FROM Q-BRIDGE-MIB VlanList1, VlanList2, VlanList3, VlanList4 FROM CISCOSB-BRIDGEMIBOBJECTS-MIB Percents,switch001 FROM CISCOSB-MIB StatisticsDPType,StatisticsClearActionType FROM CISCOSB-POLICY-MIB; rlQosCliMib MODULE-IDENTITY LAST-UPDATED "200604040000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Support Community " DESCRIPTION "Added: StatisticsCntrNumOfBitsType StatisticsCntrType rlQosStatistics rlQosPortPolicyStatisticsTable rlQosSinglePolicerStatisticsTable rlQosAggregatePolicerStatisticsTable rlQosOutQueueStatisticsTable rlQosGlobalStatisticsCntrsTable." REVISION "200602120000Z" DESCRIPTION "The private MIB module definition for Quality Of Service CLI in CISCOSB devices." REVISION "200602120000Z" DESCRIPTION "Editorial changes to support new MIB compilers." REVISION "200503140000Z" DESCRIPTION "Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable" REVISION "200502070000Z" DESCRIPTION "Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add mac-Offset,ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType" REVISION "200501270000Z" DESCRIPTION "Add new advanced action : trustCosDscp" REVISION "200411150000Z" DESCRIPTION "Add DSCP to Queue Default map table." REVISION "200309290000Z" DESCRIPTION "Add textual convention to QosObjectMode (service)." REVISION "200309210000Z" DESCRIPTION "Added this MODULE-IDENTITY clause, changed IMPORT, removed ranges in SEQUENCE elements, changed access of rlQosCliQosMode, rlQosCliBasicModeCfg and rlQosMaxNumOfAce." REVISION "200504170000Z" DESCRIPTION "Added rlQosDscpToDpTable" ::= { switch001 88 } ClassOffsetType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 6 offset types: 1- Absolute-start of the packet. 2- Layer 2-start of MAC header. 3- MPLS-start of MPLS header. 4- Layer 3-start of layer 3 header. 5- Layer 4-start of layer 4 header. 6- Layer 5-after TCP/UDP header. 7- VLAN. 8- input device port. 9- input device port. 10-VPT. 11-EtherType. 12-innerVlan. 13-Layer 3 IPv6 - start of layer 3 IPv6 header" SYNTAX INTEGER { packetStart(1), layer2-start(2), mpls-start(3), layer3-start(4), layer4-start(5), layer5-start(6), vlan(7), in-port(8), out-port(9), vpt(10), ethertype(11), inner-vlan(12), layer3-ipv6-start(13) } ClassTupleType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of Tuple types " SYNTAX INTEGER { protocol(1), ip-src(2), ip-dest(3), dscp(4), ip-precedence(5), udp-port-src(6), udp-port-dest(7), tcp-port-src(8), tcp-port-dest(9), mac-src(10), mac-dest(11), vlan(12), in-port(13), out-port(14), general(15), vpt(16), ether-type(17), tcp-flags(18), icmp-type(19), icmp-code(20), igmp-type(21), inner-vlan(22), ipv6-src(23), ipv6-dest(24), udp-port-range-start-src(25), udp-port-range-end-src(26), udp-port-range-start-dest(27), udp-port-range-end-dest(28), tcp-port-range-start-src(29), tcp-port-range-end-src(30), tcp-port-range-start-dest(31), tcp-port-range-end-dest(32) } AceActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 4 ACE Actions: 1- Permit- permit to the traffic that define by the parameters. 2- Deny- deny the traffic that define by the parameter. 3- Deny-DisablePort deny the traffic that defined by the parameters and disable the port. 4- Deny-LogInput deny the traffic that defined by the parameters and log incoming traffic. 5- Permit-LogInput permit the traffic that defined by the parameters and log incoming traffic." SYNTAX INTEGER { permit(1), deny(2), deny-DisablePort(3), deny-LogInput(4), permit-LogInput(5) } AceObjectType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 13 ACE types: 1- IP ACE. 2- IP-TCP ACE. 3- IP-UDP ACE. 4- IP-offset ACE. 5- MAC ACE. 6- MAC-offset ACE. 7- IP-ICMP ACE. 8- IP-IGMP ACE. 9- IPv6 ACE. 10- IPv6-TCP ACE. 11- IPv6-UDP ACE. 12- IPv6-offset ACE. 13- IPv6-ICMP ACE." SYNTAX INTEGER { ip(1), ip-TCP(2), ip-UDP(3), ip-Offset(4), mac(5), mac-Offset(6), ip-ICMP(7), ip-IGMP(8), ipv6(9), ipv6-TCP(10), ipv6-UDP(11), ipv6-Offset(12), ipv6-ICMP(13) } AclObjectType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 3 ACL types: 1- MAC ACL. 2- IPv4 ACL. 3- IPv6 ACL." SYNTAX INTEGER { mac(1), ip(2), ipv6(3) } ClassMapType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 2 Class-map types: 1- Match all. logical and between all statements. 2- Match any. logical or between all statements." SYNTAX INTEGER { matchAll(1), matchAny(2) } ClassMapAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 8 Class-map actios: 1- none - action not specified - use default action. 2 -Mark IP-Precedence. 3- Mark DSCP. 4- Set Egress queue 5- Mark VPT 6- Choose queue by global trust mode." SYNTAX INTEGER { none(1), setIP-Precedence(2), setDSCP(3), setQueue(4), setCos(5), trust(6) --v750 - trust mode it done by globalTrustMode field in RlQosModeGlobalCfgEntry. -- the class map action is changed to "trust" --v750 depcrated trustCos(6), --v750 depcrated trustDSCP(7), --v750 depcrated trustTCP-UDPport(8), --v750 depcrated trustCosDscp(9) } MarkVlanAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the mark vlan action type in the class map table. 1 - noMark - No vlan marking 2 - mark - mark vlan tagged. 3 - markNestedVlan - add vlan tag to the packet. " SYNTAX INTEGER { noMark(1), mark(2), markNestedVlan(3) } RedirectAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies the packet redirection options. Redirection is applied only on permitted packets. 1 - disabled - no redirect 2 - trap - trap to local_host (CPU) 3 - redirectToInterface - redirect to a output interface (port, trunk or vlan) 4 - redirectToAllPorts - redirect to all ports, except the ingress port. 5 - mirror - forward the packet and sent a copy to local_host (CPU) 6 - analyzerPort - forward the packet and sent a copy to egress port. 7 - loopback - redirect the packet the the port it was received. 8 - redirectToPortGroup - send to group of ports, defined in rlUserAssignedVidxTable table 9 - mirror_and_redirectToInterface - send the packet to interface and send a copy to local_host(CPU) 10 -mirror_and_redirectToInterfacesGroup - send the packet to group of ports and send a copy to local_host(CPU) " SYNTAX INTEGER { disabled(1), trap(2), redirectToInterface(3), redirectToAllPorts(4), mirror(5), analyzerPort(6), loopback(7), redirectToPortGroup(8), mirrorAndRedirectToInterface(9), mirrorAndRedirectToInterfacesGroup(10) } PolicerType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 3 Policer types: 1- Single policer only per one class map. 2- Aggregate policer can be applied to several class maps. 3- Cascade policer." SYNTAX INTEGER { single(1), aggregate(2), cascade(3) } PolicerAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 4 Policer Action: 1- No Action 2- Drop out of profile packets. 3- Remark out of profile packets. 4- Remark to explicit value out of profile packets 5- this policer is part of cascade chain" SYNTAX INTEGER { none(1), drop(2), remark(3), explicit-remark(4), cascadePointer(5) } QosGlobalMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 3 QoS mode: 1- disable no QoS on the system 2- Basic Qos mode only trust mode with ACL are enabled. 3- Advance mode all Qos option are enabled. 4- Service Mode -v750 DEPEREACTED!!! all Qos option are enabled only in service mode configuration" SYNTAX INTEGER { disable(1), basic(2), advance(3) --v750 deprecated service(4) } QosTrustMode ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies one of 6 QoS trust mode: - none.- v750 DEPRECATED - same as globalMode = disable. means that only ACL can be applied. - 802.1p. queue is set by the VPT field. - DSCP. queue is set by the DSCP field - v750 deprecated. replaced with new scalar rlQosDscpMutationEnable . DSCP-Mutation. the DSCP mutate in the ingress and then the queue is set by the DSCP - tcp/udp.- v750 - DEPRECATED - not supported. the queue is set by the l4 port number. - cos-dscp. Queue is set for l2 traffic by VPT field and for l3 traffic by DSCP field. " SYNTAX INTEGER { --deprecated none(1), cos(1), dscp(2), --v750 deprecated : dscp-mutation(3), --deprecated tcp-upd(5), cos-dscp(3) } BinaryStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Specifies Disable or enable." SYNTAX INTEGER { disable(1), enable(2) } QueueType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Queue type Ef or WRR." SYNTAX INTEGER { ef(1), wrr(2) } AclDefaultAction ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Default action when the ACL reach end point." SYNTAX INTEGER { deny-all(1), forward-all(2), application-specific(3) } InterfaceType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Interface type." SYNTAX INTEGER { vlan(1), port(2) } StatisticsCntrNumOfBitsType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The counter can be of different sizes - 32 bit, 48 bit, 64 bit. Maximum is 64." SYNTAX INTEGER { uint32(32), uint48(48), uint64(64) } StatisticsCntrType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The counter can be of different types, depends on actions adhered to rules that the counter is working on." SYNTAX INTEGER { statisticsCntrTypeSetDSCP(1), statisticsCntrTypeDeny(2) } RlQosTimeBasedAclWeekPeriodicList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Bitmap that includes days of week. Each bit in the bitmap associated with corresponding day of the week." SYNTAX BITS { monday(0), tuesday(1), wednesday(2), thursday(3), friday(4), saturday(5), sunday(6) } RlQosAceTidxActionDropType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The Action Drop Type." SYNTAX INTEGER { hardDrop(1), softDrop(2) } RlQosApplicationDefaultActionType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Application default actions." SYNTAX INTEGER { forward(1), hard-Drop(2), soft-Drop(3), trap(4) } -- CLI QOS MODE Scalar rlQosCliQosMode OBJECT-TYPE SYNTAX QosGlobalMode MAX-ACCESS read-write STATUS deprecated DESCRIPTION " *********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which mode the system will work: basic , advance or none." ::= { rlQosCliMib 1 } -- CLI QoS Basic Mode Config Scalar rlQosCliBasicModeCfg OBJECT-TYPE SYNTAX QosTrustMode MAX-ACCESS read-write STATUS deprecated DESCRIPTION "*********This Scalar is deprecated - rlQosGlobalCfgEntry - replaces its functionality*************** This scalar define in which trust mode the system will work:802.1p or DSCP or DSCP-Mutation or TCP/UDP or none or vpt-dscp." ::= { rlQosCliMib 2 } -- Maximum Number of ACE per system Scalar rlQosMaxNumOfAce OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar define the max number of aces." ::= { rlQosCliMib 3 } -- QoS Offset Table rlQosOffsetTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosOffsetEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table specifies Offset Table information" ::= { rlQosCliMib 4 } rlQosOffsetEntry OBJECT-TYPE SYNTAX RlQosOffsetEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Each entry in this table describes one classifier field. The information includes: Offset Type the offset the mask and the Pattern. if the type is vlan then the value will be the vlan tag. if the Type is in/out port it will be the device in/out port. The index is sequential integer represent by rlQosOffsetIndex" INDEX { rlQosOffsetIndex } ::= { rlQosOffsetTable 1 } RlQosOffsetEntry ::= SEQUENCE { rlQosOffsetIndex INTEGER, rlQosOffsetType ClassOffsetType, rlQosOffsetValue INTEGER, rlQosOffsetMask INTEGER, rlQosOffsetPattern INTEGER, rlQosOffsetTuplePointer INTEGER, rlQosOffsetStatus RowStatus } rlQosOffsetIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An arbitrary incremental Index for the offset table." ::= { rlQosOffsetEntry 1 } rlQosOffsetType OBJECT-TYPE SYNTAX ClassOffsetType MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Start of the offset." ::= { rlQosOffsetEntry 2 } rlQosOffsetValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The Offset value." ::= { rlQosOffsetEntry 3 } rlQosOffsetMask OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Define which bit to be extracted from the offset." ::= { rlQosOffsetEntry 4 } rlQosOffsetPattern OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The value to match too." ::= { rlQosOffsetEntry 5 } rlQosOffsetTuplePointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Pointer for the relevant Tuple." ::= { rlQosOffsetEntry 6 } rlQosOffsetStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosOffsetEntry 7 } -- QoS Tuple Table rlQosTupleTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosTupleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies Tuple Table information" ::= { rlQosCliMib 5 } rlQosTupleEntry OBJECT-TYPE SYNTAX RlQosTupleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one Tuple. The information includes: Tuple Type and the Tuples values. The index is sequential integer represent by rlQosTupleIndex" INDEX { rlQosTupleIndex } ::= { rlQosTupleTable 1 } RlQosTupleEntry ::= SEQUENCE { rlQosTupleIndex INTEGER, rlQosTupleType ClassTupleType, rlQosTupleValue1 INTEGER, rlQosTupleValue2 OCTET STRING, rlQosTupleStatus RowStatus } rlQosTupleIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary incremental Index for the offset table." ::= { rlQosTupleEntry 1 } rlQosTupleType OBJECT-TYPE SYNTAX ClassTupleType MAX-ACCESS read-create STATUS current DESCRIPTION "Start of the offset." ::= { rlQosTupleEntry 2 } rlQosTupleValue1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "The Tuple no.1 value can be regular integer values only." ::= { rlQosTupleEntry 3 } rlQosTupleValue2 OBJECT-TYPE SYNTAX OCTET STRING(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The Tuple no.2 value can be IPv4/IPv6/MAC address or protocol number with mask" ::= { rlQosTupleEntry 4 } rlQosTupleStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosTupleEntry 5 } -- QoS Access Control Element table rlQosAceTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies ACE table information" ::= { rlQosCliMib 6 } rlQosAceEntry OBJECT-TYPE SYNTAX RlQosAceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 8 tuples pointers. The index is sequential integer represent by rlQosAceIndex" INDEX { rlQosAceIndex } ::= { rlQosAceTable 1 } RlQosAceEntry ::= SEQUENCE { rlQosAceIndex INTEGER, rlQosAceAction AceActionType, rlQosAceType AceObjectType, rlQosAceTuple1 INTEGER, rlQosAceTuple2 INTEGER, rlQosAceTuple3 INTEGER, rlQosAceTuple4 INTEGER, rlQosAceTuple5 INTEGER, rlQosAceTuple6 INTEGER, rlQosAceTuple7 INTEGER, rlQosAceTuple8 INTEGER, rlQosAceAccount BinaryStatus, rlQosAceStatus RowStatus } rlQosAceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary incremental Index for the ACE table." ::= { rlQosAceEntry 1 } rlQosAceAction OBJECT-TYPE SYNTAX AceActionType MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Action to take." ::= { rlQosAceEntry 2 } rlQosAceType OBJECT-TYPE SYNTAX AceObjectType MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Type" ::= { rlQosAceEntry 3 } rlQosAceTuple1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 4 } rlQosAceTuple2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 5 } rlQosAceTuple3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 6 } rlQosAceTuple4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 7 } rlQosAceTuple5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 8 } rlQosAceTuple6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 9 } rlQosAceTuple7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 10 } rlQosAceTuple8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple 1 pointer." ::= { rlQosAceEntry 11 } rlQosAceAccount OBJECT-TYPE SYNTAX BinaryStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE." ::= { rlQosAceEntry 12 } rlQosAceStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosAceEntry 13 } -- QoS Access Control List table rlQosAclTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies ACL table information" ::= { rlQosCliMib 7 } rlQosAclEntry OBJECT-TYPE SYNTAX RlQosAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one Classifier Element. The information includes: Action and the row status. The ACE pointer are in the ACL-ACE reference table. The index is sequential integer represent by rlQosAceIndex" INDEX { rlQosAclIndex } ::= { rlQosAclTable 1 } RlQosAclEntry ::= SEQUENCE { rlQosAclIndex INTEGER, rlQosAclName DisplayString, rlQosAclType AclObjectType, rlQosAclStatus RowStatus, rlQosAclNumOfAces INTEGER } rlQosAclIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary incremental Index for the ACE table." ::= { rlQosAclEntry 1 } rlQosAclName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name ACL." ::= { rlQosAclEntry 2 } rlQosAclType OBJECT-TYPE SYNTAX AclObjectType MAX-ACCESS read-create STATUS current DESCRIPTION "ACL Type." ::= { rlQosAclEntry 3 } rlQosAclStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosAclEntry 4 } rlQosAclNumOfAces OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Holds number of aces in the acl." ::= { rlQosAclEntry 5 } --QoS ACE ACL refernce table rlQosAclAceRefTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosAclAceRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the ACE to ACL relationship." ::= { rlQosCliMib 8 } rlQosAclAceRefEntry OBJECT-TYPE SYNTAX RlQosAclAceRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the relationship between ACE to ACL. Show which ACE include in one ACL. The index is the ACE pointer represent by rlQosAclAceRefAcePointer" INDEX { rlQosAclAceRefAcePointer } ::= { rlQosAclAceRefTable 1 } RlQosAclAceRefEntry ::= SEQUENCE { rlQosAclAceRefAcePointer INTEGER, rlQosAclAceRefAclPointer INTEGER, rlQosAclAceRefStatus RowStatus } rlQosAclAceRefAcePointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index is the ACE pointer" ::= { rlQosAclAceRefEntry 1 } rlQosAclAceRefAclPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACL index Pointer" ::= { rlQosAclAceRefEntry 2 } rlQosAclAceRefStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosAclAceRefEntry 3 } -- QoS Class-Map table rlQosClassMapTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosClassMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies CCL table information" ::= { rlQosCliMib 9 } rlQosClassMapEntry OBJECT-TYPE SYNTAX RlQosClassMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one Class Map Element. The information includes: Classes Name,Class Action, Policer pointer, and 1 match statements. The index is sequential integer represent by rlQosClassMapIndex" INDEX { rlQosClassMapIndex } ::= { rlQosClassMapTable 1 } RlQosClassMapEntry ::= SEQUENCE { rlQosClassMapIndex INTEGER, rlQosClassMapName DisplayString, rlQosClassMapType ClassMapType, rlQosClassMapAction ClassMapAction, rlQosClassMapMarkValue INTEGER, rlQosClassMapPolicer INTEGER, rlQosClassMapMatch1 INTEGER, rlQosClassMapMatch2 INTEGER, rlQosClassMapMarkVlan MarkVlanAction, rlQosClassMapNewVlan INTEGER, rlQosClassMapRedirectAction RedirectAction, rlQosClassMapDestInterface INTEGER, rlQosClassMapStatus RowStatus, rlQosClassMapMatch3 INTEGER, rlQosClassMapTrapId INTEGER, rlQosClassMapCounterEnable TruthValue, rlQosClassMapTunnelIdx Unsigned32 } rlQosClassMapIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Class Map Index" ::= { rlQosClassMapEntry 1 } rlQosClassMapName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Class Map." ::= { rlQosClassMapEntry 2 } rlQosClassMapType OBJECT-TYPE SYNTAX ClassMapType MAX-ACCESS read-create STATUS current DESCRIPTION "Class map type" DEFVAL {1} ::= { rlQosClassMapEntry 3 } rlQosClassMapAction OBJECT-TYPE SYNTAX ClassMapAction MAX-ACCESS read-create STATUS current DESCRIPTION "Class Map Action." DEFVAL {1} ::= { rlQosClassMapEntry 4 } rlQosClassMapMarkValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Mark value when mark action has been chosen in Class Map Action field." DEFVAL {0} ::= { rlQosClassMapEntry 5 } rlQosClassMapPolicer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Policer pointer. 0-means no policer." DEFVAL {0} ::= { rlQosClassMapEntry 6 } rlQosClassMapMatch1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Match ACL 1 pointer." ::= { rlQosClassMapEntry 7 } rlQosClassMapMatch2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Match ACL 2 pointer." DEFVAL {0} ::= { rlQosClassMapEntry 8 } rlQosClassMapMarkVlan OBJECT-TYPE SYNTAX MarkVlanAction MAX-ACCESS read-create STATUS current DESCRIPTION "If 'mark', than the classified traffic will be remarked with new VLAN id. If 'disabled' VLAN id is not changed. If markNestedVlan, if the egress interface defined as VLAN tagged member then a new VLAN tag is added to the packet." DEFVAL {1} ::= { rlQosClassMapEntry 9 } rlQosClassMapNewVlan OBJECT-TYPE SYNTAX INTEGER(0..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "If rlQosClassMapMarkVlan is not 'noMark', than the classified traffic will be remarked with new VLAN id. The value of this field sets new VLAN id." DEFVAL {0} ::= { rlQosClassMapEntry 10 } rlQosClassMapRedirectAction OBJECT-TYPE SYNTAX RedirectAction MAX-ACCESS read-create STATUS current DESCRIPTION "Specifiy the redirection action." DEFVAL {disabled} ::= { rlQosClassMapEntry 11 } rlQosClassMapDestInterface OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Relevant if rlQosClassMapRedirect is either 'redirectToInterface' or 'analyzerPort' or 'toMultipleInterfaces'. Specified the output interface the packet is redireted to or the port that gets copy of the packet in addition to the port it was forwarded." DEFVAL {0} ::= { rlQosClassMapEntry 12 } rlQosClassMapStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosClassMapEntry 13 } rlQosClassMapMatch3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Match ACL 3 pointer." DEFVAL {0} ::= { rlQosClassMapEntry 14 } rlQosClassMapTrapId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "If now zero, Indicates the trap type id the matched packets arrives with, relevant when RedirectAction is trap or mirror." DEFVAL {0} ::= { rlQosClassMapEntry 15 } rlQosClassMapCounterEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable counting per class map. Counts packets matche the class map rules." DEFVAL {false} ::= { rlQosClassMapEntry 16 } rlQosClassMapTunnelIdx OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "If not zero, then the tunnel data pointed by rlQosClassMapTunnelIdx is added to the packet" DEFVAL {0} ::= { rlQosClassMapEntry 17 } --- QoS Policer table rlQosPolicerTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies All the Policers in the system Information" ::= { rlQosCliMib 10 } rlQosPolicerEntry OBJECT-TYPE SYNTAX RlQosPolicerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one policer. The information includes: Policer name, Policer type, Committed Rate, Committed Burst, Out-of-Profile Action. The index is sequential integer represent by rlQosPolicerIndex" INDEX { rlQosPolicerIndex } ::= { rlQosPolicerTable 1 } RlQosPolicerEntry ::= SEQUENCE { rlQosPolicerIndex INTEGER, rlQosPolicerName DisplayString, rlQosPolicerType PolicerType, rlQosPolicerCir Unsigned32, rlQosPolicerCbs Unsigned32, rlQosPolicerAction PolicerAction, rlQosPolicerCasPointerRemVal INTEGER, rlQosPolicerStatus RowStatus } rlQosPolicerIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policer Index." ::= { rlQosPolicerEntry 1 } rlQosPolicerName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the Policer." ::= { rlQosPolicerEntry 2 } rlQosPolicerType OBJECT-TYPE SYNTAX PolicerType MAX-ACCESS read-create STATUS current DESCRIPTION "Policer type" ::= { rlQosPolicerEntry 3 } rlQosPolicerCir OBJECT-TYPE SYNTAX Unsigned32 UNITS "kbps" MAX-ACCESS read-create STATUS current DESCRIPTION "Committed rate value." ::= { rlQosPolicerEntry 4 } rlQosPolicerCbs OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "Committed rate Value." ::= { rlQosPolicerEntry 5 } rlQosPolicerAction OBJECT-TYPE SYNTAX PolicerAction MAX-ACCESS read-create STATUS current DESCRIPTION "Out of profile Action." ::= { rlQosPolicerEntry 6 } rlQosPolicerCasPointerRemVal OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Pointer to use whan the type is cascade policer. 0-means no cascade policer. It can also be Remark value in case of explicit remark" ::= { rlQosPolicerEntry 7 } rlQosPolicerStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosPolicerEntry 8 } -- QoS Police-Map table rlQosPolicyMapTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPolicyMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies Policy Map Table Information" ::= { rlQosCliMib 11 } rlQosPolicyMapEntry OBJECT-TYPE SYNTAX RlQosPolicyMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one policy map. The information includes: Index, Policy Map name, Up to 6 class map names. The index is sequential integer represent by rlQosPolicerIndex" INDEX { rlQosPolicyMapIndex } ::= { rlQosPolicyMapTable 1 } RlQosPolicyMapEntry ::= SEQUENCE { rlQosPolicyMapIndex INTEGER, rlQosPolicyMapName DisplayString, rlQosPolicyMapStatus RowStatus } rlQosPolicyMapIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Policy map Index." ::= { rlQosPolicyMapEntry 1 } rlQosPolicyMapName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) -- Rsyntax OCTET STRING(SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Policy map Name." ::= { rlQosPolicyMapEntry 2 } rlQosPolicyMapStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosPolicyMapEntry 3 } --QoS Policy Class map refernce table rlQosPolicyClassRefTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPolicyClassRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The relationship between policy map to class map" ::= { rlQosCliMib 12 } rlQosPolicyClassRefEntry OBJECT-TYPE SYNTAX RlQosPolicyClassRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer" INDEX { rlQosPolicyClassRefClassPointer } ::= { rlQosPolicyClassRefTable 1 } RlQosPolicyClassRefEntry ::= SEQUENCE { rlQosPolicyClassRefClassPointer INTEGER, rlQosPolicyClassRefPolicyPointer INTEGER, rlQosPolicyClassRefStatus RowStatus } rlQosPolicyClassRefClassPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Index is the Class-map pointer" ::= { rlQosPolicyClassRefEntry 1 } rlQosPolicyClassRefPolicyPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Policy map index Pointer" ::= { rlQosPolicyClassRefEntry 2 } rlQosPolicyClassRefStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosPolicyClassRefEntry 3 } -- QoS Interface Policy table rlQosIfPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosIfPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies for each interface the Policy Map attach to it" ::= { rlQosCliMib 13 } rlQosIfPolicyEntry OBJECT-TYPE SYNTAX RlQosIfPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes what policy Map attached to specific Interface. The index is Interface Index represent by rlIfIndex and the interface type represent by rlIfType" INDEX { rlIfIndex, rlIfType } ::= { rlQosIfPolicyTable 1 } RlQosIfPolicyEntry ::= SEQUENCE { rlIfIndex INTEGER, rlIfType InterfaceType, rlQosIfPolicyMapPointerIn INTEGER, rlQosIfPolicyMapPointerOut INTEGER, rlQosIfTrustActive BinaryStatus, rlQosPortShaperStatus BinaryStatus, rlQosCirPortShaper INTEGER, rlQosCbsPortShaper INTEGER, rlQosIfProfilePointer DisplayString, rlQosQueueProfilePointer DisplayString, rlQosQueueShapeProfilePointer INTEGER, rlQosAclDefaultAction AclDefaultAction, rlQosIfPolicyMapStatus RowStatus, rlQosIfAclIn INTEGER, rlQosIfAclOut INTEGER, rlQosIfPolicerIn INTEGER, rlQosPortRateLimitStatus BinaryStatus, rlQosCirPortRateLimit INTEGER, rlQosCbsPortRateLimit INTEGER, rlQosIfIpv6AclIn INTEGER, rlQosIfIpv6AclOut INTEGER } rlIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index." ::= { rlQosIfPolicyEntry 1 } rlIfType OBJECT-TYPE SYNTAX InterfaceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Type(vlan/port)." ::= { rlQosIfPolicyEntry 2 } rlQosIfPolicyMapPointerIn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Policy map pointer Input." ::= { rlQosIfPolicyEntry 3 } rlQosIfPolicyMapPointerOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Policy map pointer Output." ::= { rlQosIfPolicyEntry 4 } rlQosIfTrustActive OBJECT-TYPE SYNTAX BinaryStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Interface Basic Mode Trust is active or not ." ::= { rlQosIfPolicyEntry 5 } rlQosPortShaperStatus OBJECT-TYPE SYNTAX BinaryStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If there is shaper on the port" ::= { rlQosIfPolicyEntry 6 } rlQosCirPortShaper OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-create STATUS current DESCRIPTION "The CIR for the port shaper. N/A when the shper is disabled" ::= { rlQosIfPolicyEntry 7} rlQosCbsPortShaper OBJECT-TYPE SYNTAX INTEGER UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The CBS for the port shaper. N/A when the shper is disabled" ::= { rlQosIfPolicyEntry 8 } rlQosIfProfilePointer OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "Interface Profile name pointer." ::= { rlQosIfPolicyEntry 9 } rlQosQueueProfilePointer OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION " Queue Profile name pointer." ::= { rlQosIfPolicyEntry 10 } rlQosQueueShapeProfilePointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION " Queue shape Profile pointer." ::= { rlQosIfPolicyEntry 11 } rlQosAclDefaultAction OBJECT-TYPE SYNTAX AclDefaultAction MAX-ACCESS read-create STATUS current DESCRIPTION " When one ACL is enterd then what to do for the last rull." ::= { rlQosIfPolicyEntry 12 } rlQosIfPolicyMapStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosIfPolicyEntry 13 } rlQosIfAclIn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Index of an ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied." DEFVAL {0} ::= { rlQosIfPolicyEntry 14 } rlQosIfAclOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Index of an ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied." DEFVAL {0} ::= { rlQosIfPolicyEntry 15 } rlQosIfPolicerIn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Index of an Policer in the rlQosPolicerTable, which is applied to the ingress of an interface. 0 - means no Policer applied." DEFVAL {0} ::= { rlQosIfPolicyEntry 16 } rlQosPortRateLimitStatus OBJECT-TYPE SYNTAX BinaryStatus MAX-ACCESS read-create STATUS current DESCRIPTION "If there is Rate limit on the port" DEFVAL {disable} ::= { rlQosIfPolicyEntry 17 } rlQosCirPortRateLimit OBJECT-TYPE SYNTAX INTEGER UNITS "bps" MAX-ACCESS read-create STATUS current DESCRIPTION "The CIR for the port rate limit. N/A when the Rate limit is disabled" DEFVAL {0} ::= { rlQosIfPolicyEntry 18} rlQosCbsPortRateLimit OBJECT-TYPE SYNTAX INTEGER UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The CBS for the port Rate limit. N/A when the Rate limit is disabled" DEFVAL {0} ::= { rlQosIfPolicyEntry 19 } rlQosIfIpv6AclIn OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Index of an IPv6 ACL in the rlQosAclTable, which is applied to the ingress of an interface. 0 - means no ACL applied." DEFVAL {0} ::= { rlQosIfPolicyEntry 20 } rlQosIfIpv6AclOut OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Index of an IPv6 ACL in the rlQosAclTable, which is applied to the egress of an interface. 0 - means no ACL applied." DEFVAL {0} ::= { rlQosIfPolicyEntry 21 } -- QoS Interface Profile table rlQosIfProfileCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosIfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies for each Queue the Tail Drop or WRED parameters and the EF of WRR parameters." ::= { rlQosCliMib 14 } rlQosIfProfileCfgEntry OBJECT-TYPE SYNTAX RlQosIfProfileCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one queue parameters: Tail-drop threshold for drop precedence 0,1,3 and the WRED min-max threshold and the probability factor for Drop precedence 0,1,2 and the WRED Q factor and the EF priority and the WRR weight. The index is Interface Index represent by rlIfProfileName and queue-id represent by rlQosQueueId" INDEX { rlIfProfileName, rlQosQueueId } ::= { rlQosIfProfileCfgTable 1 } RlQosIfProfileCfgEntry ::= SEQUENCE { rlIfProfileName DisplayString, rlQosQueueId INTEGER, rlQosTdThersholdDp0 INTEGER, rlQosTdThersholdDp1 INTEGER, rlQosTdThersholdDp2 INTEGER, rlQosRedMinDp0 INTEGER, rlQosRedMaxDp0 INTEGER, rlQosRedProbDp0 INTEGER, rlQosRedMinDp1 INTEGER, rlQosRedMaxDp1 INTEGER, rlQosRedProbDp1 INTEGER, rlQosRedMinDp2 INTEGER, rlQosRedMaxDp2 INTEGER, rlQosRedProbDp2 INTEGER, rlQosRedQweight INTEGER, rlQosIfprofileStatus RowStatus } rlIfProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index." ::= { rlQosIfProfileCfgEntry 1 } rlQosQueueId OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue id Index." ::= { rlQosIfProfileCfgEntry 2 } rlQosTdThersholdDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 0." ::= { rlQosIfProfileCfgEntry 3 } rlQosTdThersholdDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 1." ::= { rlQosIfProfileCfgEntry 4 } rlQosTdThersholdDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "Tail Drop Threshold for Drop Precedence 2." ::= { rlQosIfProfileCfgEntry 5 } rlQosRedMinDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 2." ::= { rlQosIfProfileCfgEntry 6 } rlQosRedMaxDp0 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 0." ::= { rlQosIfProfileCfgEntry 7 } rlQosRedProbDp0 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "WRED probability for Drop Precedence 0." ::= { rlQosIfProfileCfgEntry 8 } rlQosRedMinDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 2." ::= { rlQosIfProfileCfgEntry 9 } rlQosRedMaxDp1 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 1." ::= { rlQosIfProfileCfgEntry 10 } rlQosRedProbDp1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "WRED probability for Drop Precedence 1." ::= { rlQosIfProfileCfgEntry 11 } rlQosRedMinDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "WRED Min Threshold for Drop Precedence 2." ::= { rlQosIfProfileCfgEntry 12 } rlQosRedMaxDp2 OBJECT-TYPE SYNTAX INTEGER (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "WRED Max Threshold for Drop Precedence 2." ::= { rlQosIfProfileCfgEntry 13 } rlQosRedProbDp2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "WRED probability for Drop Precedence 2." ::= { rlQosIfProfileCfgEntry 14 } rlQosRedQweight OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Q factor for WRED." ::= { rlQosIfProfileCfgEntry 15 } rlQosIfprofileStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosIfProfileCfgEntry 16 } -- QoS DSCP Mutation Map rlQosDscpMutationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosDscpMutationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP Mutation table" ::= { rlQosCliMib 15 } rlQosDscpMutationEntry OBJECT-TYPE SYNTAX RlQosDscpMutationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp" INDEX { rlQosOldDscp } ::= { rlQosDscpMutationTable 1 } RlQosDscpMutationEntry ::= SEQUENCE { rlQosOldDscp INTEGER, rlQosNewDscp INTEGER } rlQosOldDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Old DSCP." ::= { rlQosDscpMutationEntry 1 } rlQosNewDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "New DSCP." ::= { rlQosDscpMutationEntry 2 } -- QoS DSCP Police Transmit(Remark) map rlQosDscpRemarkTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosDscpRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP Remark table" ::= { rlQosCliMib 16 } rlQosDscpRemarkEntry OBJECT-TYPE SYNTAX RlQosDscpRemarkEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the new DSCP for the packet. The index is Old DSCP represent by rlQosOldDscp" INDEX { rlQosRmOldDscp } ::= { rlQosDscpRemarkTable 1 } RlQosDscpRemarkEntry ::= SEQUENCE { rlQosRmOldDscp INTEGER, rlQosRmNewDscp INTEGER } rlQosRmOldDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Old DSCP." ::= { rlQosDscpRemarkEntry 1 } rlQosRmNewDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-create STATUS current DESCRIPTION "New DSCP." ::= { rlQosDscpRemarkEntry 2 } -- QoS CoS (VPT) to Queue map rlQosCosQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosCosQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The Cos to queue map table" ::= { rlQosCliMib 17 } rlQosCosQueueEntry OBJECT-TYPE SYNTAX RlQosCosQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes queue ID. The index is CoS represent by rlQosCosIndex" INDEX { rlQosCosIndex } ::= { rlQosCosQueueTable 1 } RlQosCosQueueEntry::= SEQUENCE { rlQosCosIndex INTEGER, rlQosCosQueueId INTEGER } rlQosCosIndex OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS not-accessible STATUS current DESCRIPTION "CoS value (0-7)." ::= { rlQosCosQueueEntry 1 } rlQosCosQueueId OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Queue ID." ::= { rlQosCosQueueEntry 2 } -- QoS DSCP to Queue (VPT) map rlQosDscpQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosDscpQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP to Queue map table" ::= { rlQosCliMib 18 } rlQosDscpQueueEntry OBJECT-TYPE SYNTAX RlQosDscpQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The Queue Number. The index is DSCP represent by rlQosDscpIndex" INDEX { rlQosDscpIndex } ::= { rlQosDscpQueueTable 1 } RlQosDscpQueueEntry ::= SEQUENCE { rlQosDscpIndex INTEGER, rlQosQueueNum INTEGER } rlQosDscpIndex OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "DSCP value." ::= { rlQosDscpQueueEntry 1 } rlQosQueueNum OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Queue Number." ::= { rlQosDscpQueueEntry 2 } -- QoS TCP port to Queue map rlQosTcpPortQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosTcpPortQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies TCP Port to Queue map table" ::= { rlQosCliMib 19 } rlQosTcpPortQueueEntry OBJECT-TYPE SYNTAX RlQosTcpPortQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The Queue Number. The index is TCP/UDP port represent by rlQosTcpUdpPort" INDEX { rlQosTcpPort } ::= { rlQosTcpPortQueueTable 1 } RlQosTcpPortQueueEntry ::= SEQUENCE { rlQosTcpPort INTEGER, rlQosTcpQueueValue INTEGER, rlQosTcpPortQueueStatus RowStatus } rlQosTcpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "TCP port number." ::= { rlQosTcpPortQueueEntry 1 } rlQosTcpQueueValue OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Queue Number." ::= { rlQosTcpPortQueueEntry 2 } rlQosTcpPortQueueStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosTcpPortQueueEntry 3 } -- QoS UDP port to Queue map rlQosUdpPortQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosUdpPortQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies UDP Port to Queue map table" ::= { rlQosCliMib 20 } rlQosUdpPortQueueEntry OBJECT-TYPE SYNTAX RlQosUdpPortQueueEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The Queue Number. The index is UDP port represent by rlQosTcpUdpPort" INDEX { rlQosUdpPort } ::= { rlQosUdpPortQueueTable 1 } RlQosUdpPortQueueEntry ::= SEQUENCE { rlQosUdpPort INTEGER, rlQosUdpQueueValue INTEGER, rlQosUdpPortQueueStatus RowStatus } rlQosUdpPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "UDP port number." ::= { rlQosUdpPortQueueEntry 1 } rlQosUdpQueueValue OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "Queue value." ::= { rlQosUdpPortQueueEntry 2 } rlQosUdpPortQueueStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosUdpPortQueueEntry 3 } -- CLI QoS Number of EF Scalar rlQosEfManageTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosEfManageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies UDP Port to DSCP map table" ::= { rlQosCliMib 21 } rlQosEfManageEntry OBJECT-TYPE SYNTAX RlQosEfManageEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This Table describes The EF management for the system. The index is UDP port represent by rlQosEfQueueId" INDEX { rlQosEfQueueId } ::= { rlQosEfManageTable 1 } RlQosEfManageEntry ::= SEQUENCE { rlQosEfQueueId INTEGER, rlQosEfState BinaryStatus, rlQosEfPriority INTEGER } rlQosEfQueueId OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Queue-ID." ::= { rlQosEfManageEntry 1 } rlQosEfState OBJECT-TYPE SYNTAX BinaryStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Enable/disable" ::= { rlQosEfManageEntry 2 } rlQosEfPriority OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-create STATUS current DESCRIPTION "The priority of the queue" ::= { rlQosEfManageEntry 3 } -- CLI QoS Queue Profile rlQosQueueProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosQueueProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table describes the queue managment profiles " ::= { rlQosCliMib 22 } rlQosQueueProfileEntry OBJECT-TYPE SYNTAX RlQosQueueProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The queue managment profile Value. The index is profile name represent by rlQueueProfileName" INDEX { rlQueueProfileName } ::= { rlQosQueueProfileTable 1 } RlQosQueueProfileEntry ::= SEQUENCE { rlQueueProfileName DisplayString, rlQosTypeQueue1 QueueType, rlQosValueQueue1 INTEGER, rlQosTypeQueue2 QueueType, rlQosValueQueue2 INTEGER, rlQosTypeQueue3 QueueType, rlQosValueQueue3 INTEGER, rlQosTypeQueue4 QueueType, rlQosValueQueue4 INTEGER, rlQosTypeQueue5 QueueType, rlQosValueQueue5 INTEGER, rlQosTypeQueue6 QueueType, rlQosValueQueue6 INTEGER, rlQosTypeQueue7 QueueType, rlQosValueQueue7 INTEGER, rlQosTypeQueue8 QueueType, rlQosValueQueue8 INTEGER, rlQosQueueProfileStatus RowStatus, rlQosNumOfIfConnections INTEGER } rlQueueProfileName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Profile name for the Queue profile." ::= { rlQosQueueProfileEntry 1 } rlQosTypeQueue1 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 2 } rlQosValueQueue1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 3 } rlQosTypeQueue2 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 4 } rlQosValueQueue2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 5 } rlQosTypeQueue3 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 6 } rlQosValueQueue3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 7 } rlQosTypeQueue4 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 8 } rlQosValueQueue4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 9 } rlQosTypeQueue5 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 10 } rlQosValueQueue5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 11 } rlQosTypeQueue6 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 12 } rlQosValueQueue6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 13 } rlQosTypeQueue7 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 14} rlQosValueQueue7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 15 } rlQosTypeQueue8 OBJECT-TYPE SYNTAX QueueType MAX-ACCESS read-create STATUS current DESCRIPTION "EF or WRR" ::= { rlQosQueueProfileEntry 16 } rlQosValueQueue8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "for EF read-only for wrr the weight" ::= { rlQosQueueProfileEntry 17 } rlQosQueueProfileStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosQueueProfileEntry 18 } rlQosNumOfIfConnections OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "how many time this entry connected to the if policy table" ::= { rlQosQueueProfileEntry 19 } -- CLI QoS Queue Shape Profile rlQosQueueShapeProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosQueueShapeProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies the queue shaper profile" ::= { rlQosCliMib 23 } rlQosQueueShapeProfileEntry OBJECT-TYPE SYNTAX RlQosQueueShapeProfileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes The shaper profile for all queues. The index sequencial index represent by rlQosQueueShapeIndex" INDEX { rlQosQueueShapeIndex} ::= { rlQosQueueShapeProfileTable 1 } RlQosQueueShapeProfileEntry ::= SEQUENCE { rlQosQueueShapeIndex INTEGER, rlQosCirQueue1 INTEGER, rlQosCbsQueue1 INTEGER, rlQosCirQueue2 INTEGER, rlQosCbsQueue2 INTEGER, rlQosCirQueue3 INTEGER, rlQosCbsQueue3 INTEGER, rlQosCirQueue4 INTEGER, rlQosCbsQueue4 INTEGER, rlQosCirQueue5 INTEGER, rlQosCbsQueue5 INTEGER, rlQosCirQueue6 INTEGER, rlQosCbsQueue6 INTEGER, rlQosCirQueue7 INTEGER, rlQosCbsQueue7 INTEGER, rlQosCirQueue8 INTEGER, rlQosCbsQueue8 INTEGER, rlQosQueueShapeProfileStatus RowStatus } rlQosQueueShapeIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Profile Index." ::= { rlQosQueueShapeProfileEntry 1 } rlQosCirQueue1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue1 0 for not active" ::= { rlQosQueueShapeProfileEntry 2 } rlQosCbsQueue1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue1 0 for not active" ::= { rlQosQueueShapeProfileEntry 3 } rlQosCirQueue2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue2 0 for not active" ::= { rlQosQueueShapeProfileEntry 4 } rlQosCbsQueue2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue2 0 for not active" ::= { rlQosQueueShapeProfileEntry 5 } rlQosCirQueue3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue3 0 for not active" ::= { rlQosQueueShapeProfileEntry 6 } rlQosCbsQueue3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue3 0 for not active" ::= { rlQosQueueShapeProfileEntry 7 } rlQosCirQueue4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue4 0 for not active" ::= { rlQosQueueShapeProfileEntry 8 } rlQosCbsQueue4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue4 0 for not active" ::= { rlQosQueueShapeProfileEntry 9 } rlQosCirQueue5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue5 0 for not active" ::= { rlQosQueueShapeProfileEntry 10 } rlQosCbsQueue5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue5 0 for not active" ::= { rlQosQueueShapeProfileEntry 11 } rlQosCirQueue6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue6 0 for not active" ::= { rlQosQueueShapeProfileEntry 12 } rlQosCbsQueue6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue6 0 for not active" ::= { rlQosQueueShapeProfileEntry 13 } rlQosCirQueue7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue7 0 for not active" ::= { rlQosQueueShapeProfileEntry 14 } rlQosCbsQueue7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue7 0 for not active" ::= { rlQosQueueShapeProfileEntry 15 } rlQosCirQueue8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CIR for Queue8 0 for not active" ::= { rlQosQueueShapeProfileEntry 16 } rlQosCbsQueue8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "CBS for Queue8 0 for not active" ::= { rlQosQueueShapeProfileEntry 17 } rlQosQueueShapeProfileStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosQueueShapeProfileEntry 18 } -- ACL counters table rlQosAclCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosAclCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to show statistics for ACL applied on an interface." ::= { rlQosCliMib 24 } rlQosAclCounterEntry OBJECT-TYPE SYNTAX RlQosAclCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry shows value of conter for a particular ACE of an ACL." INDEX { rlQosAclCounterInterface, rlQosAclCounterAclIndex, rlQosAclCounterAceIndex} ::= { rlQosAclCounterTable 1 } RlQosAclCounterEntry ::= SEQUENCE { rlQosAclCounterInterface InterfaceIndex, rlQosAclCounterAclIndex INTEGER, rlQosAclCounterAceIndex INTEGER, rlQosAclCounterValue Counter32 } rlQosAclCounterInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Interface Index on which ACL is applied." ::= { rlQosAclCounterEntry 1 } rlQosAclCounterAclIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index of ACL, which was applied on the IfIndex." ::= { rlQosAclCounterEntry 2 } rlQosAclCounterAceIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index of ACE, which is belong to an ACL." ::= { rlQosAclCounterEntry 3 } rlQosAclCounterValue OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the ACE counter." ::= { rlQosAclCounterEntry 4 } -- Free indexes table rlQosFreeIndexesTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosFreeIndexesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to get free indexes of tables to create new entries. The algorithm for free indexes depends on table's type: Tuple table - first free index. Offset table - first free index. ACE table - last used index + ACE indexes delta. ACL table - first free index. Class Map table - last used index + Class Map indexes delta. Policy Map table - first free index. Policer Table - first free index. The ACE indexes delta and Class Map indexes delta are used to supply QoS MIB user easy insert entry capabilities. Values of these deltas depend on the MIB implementation. The 'Get and increment' approach is used in all cases. " ::= { rlQosCliMib 25 } rlQosFreeIndexesEntry OBJECT-TYPE SYNTAX RlQosFreeIndexesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry is used to get free index for particular table." INDEX { rlQosFreeIndexesTableId} ::= { rlQosFreeIndexesTable 1 } RlQosFreeIndexesEntry ::= SEQUENCE { rlQosFreeIndexesTableId INTEGER, rlQosFreeIndexesValue INTEGER } rlQosFreeIndexesTableId OBJECT-TYPE SYNTAX INTEGER { tuple (1), offset(2), ace(3), acl(4), class(5), policy(6), policer(7), shaper(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "Identification of the table, for which free index is retrieved." ::= { rlQosFreeIndexesEntry 1 } rlQosFreeIndexesValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Free index for table. 0 means no free entries." ::= { rlQosFreeIndexesEntry 2 } -- names to indexes table rlQosNamesToIndexesTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosNamesToIndexesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to get the ACL,Class-Map and Policy-Map indexes from the name." ::= { rlQosCliMib 26 } rlQosNamesToIndexesEntry OBJECT-TYPE SYNTAX RlQosNamesToIndexesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry is used to get index form particular name and table type." INDEX { rlQosNamesToIndexesTableId, rlQosNamesToIndexesName} ::= { rlQosNamesToIndexesTable 1 } RlQosNamesToIndexesEntry ::= SEQUENCE { rlQosNamesToIndexesTableId INTEGER, rlQosNamesToIndexesName DisplayString, rlQosNamesToIndexesValue INTEGER } rlQosNamesToIndexesTableId OBJECT-TYPE SYNTAX INTEGER { acl(1), class(2), policy(3), policer(4) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "Identification of the table, for which the index is retrieved." ::= { rlQosNamesToIndexesEntry 1 } rlQosNamesToIndexesName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the entry" ::= { rlQosNamesToIndexesEntry 2 } rlQosNamesToIndexesValue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "the index for table" ::= { rlQosNamesToIndexesEntry 3 } -- Stack Control Queue number rlQosStackControlQueue OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar object defines queue ID, which is used for stack control information transfer. For standalone systems the scalar value equals 0. This scalar object can be used for warning messages when users assign a QoS map item, or a Class to the stack control queue." ::= { rlQosCliMib 27 } -- Stack Control CoS rlQosStackControlCos OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This scalar object defines CoS (VPT), which is used for stack control information transfer. For standalone systems the scalar value equals 8 (not valid for VPT). This scalar object can be used for warning messages when users assign a stack control CoS to a non-stacking control queue." ::= { rlQosCliMib 28 } -- Cos to Queue Default map table rlQosCosQueueDefaultMapTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosCosQueueDefaultMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to set default 802.1p map (vpt to queue)" ::= { rlQosCliMib 29 } rlQosCosQueueDefaultMapEntry OBJECT-TYPE SYNTAX RlQosCosQueueDefaultMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry is used to get index form particular name and table type." INDEX { rlQosCosQueueDefaultMapVpt } ::= { rlQosCosQueueDefaultMapTable 1 } RlQosCosQueueDefaultMapEntry ::= SEQUENCE { rlQosCosQueueDefaultMapVpt INTEGER, rlQosCosQueueDefaultMapQueueId INTEGER } rlQosCosQueueDefaultMapVpt OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "vlan priority tag , 3 bits of priority which determine the service class." ::= { rlQosCosQueueDefaultMapEntry 1 } rlQosCosQueueDefaultMapQueueId OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "the queue id vary from the first queue id to Max Number of queues supported" ::= { rlQosCosQueueDefaultMapEntry 2 } -- Predefined ACLs interface table rlQosPredefBlockAclTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPredefBlockAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used apply predefined ACLs to interfaces. Predefined ACLs is ACL to filter particular protocol or protocol's family. These ACL may operate simultaneously with IP and MAC ACLs." ::= { rlQosCliMib 30 } rlQosPredefBlockAclEntry OBJECT-TYPE SYNTAX RlQosPredefBlockAclEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry is used to apply predefined ACLs to the interface." INDEX { rlQosPredefBlockAclIfIndex, rlQosPredefBlockAclIfType } ::= { rlQosPredefBlockAclTable 1 } RlQosPredefBlockAclEntry ::= SEQUENCE { rlQosPredefBlockAclIfIndex InterfaceIndex, rlQosPredefBlockAclIfType InterfaceType, rlQosPredefBlockAclMask OCTET STRING, rlQosPredefBlockAclStatus RowStatus } rlQosPredefBlockAclIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "IfIndex of port/trunk or VLAN tag of VLAN on which predefined ACLa will be configured." ::= { rlQosPredefBlockAclEntry 1 } rlQosPredefBlockAclIfType OBJECT-TYPE SYNTAX InterfaceType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Type(vlan/port)." ::= { rlQosPredefBlockAclEntry 2 } rlQosPredefBlockAclMask OBJECT-TYPE -- SYNTAX BITS { -- LLCNetBueiNetBios(0), -- IPNetBueiNetBios(1) -- } SYNTAX OCTET STRING (SIZE(1)) MAX-ACCESS read-create STATUS current DESCRIPTION "This bitmap defines predefined ACL which are applied on an interface. The table below defines bitmasks for supported predefined ACL. Protocol/Family bitmask Description ===================================================== LLC NetBuei/NetBios 0x01 ACL filters out LLC encapsulated NetBuei/NetBios frames IP NetBuei/NetBios 0x02 ACL filters out IP encapsulated NetBuei/NetBios frames " ::= { rlQosPredefBlockAclEntry 3 } rlQosPredefBlockAclStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosPredefBlockAclEntry 4 } -- QoS Access Control Element table two indexes rlQosAceTidxTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosAceTidxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies ACE table with two index information" ::= { rlQosCliMib 31 } rlQosAceTidxEntry OBJECT-TYPE SYNTAX RlQosAceTidxEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes one Classifier Element. The information includes: Action the ACE's Type the up to 11 tuples pointers. The index is sequential integer represent by rlQosAceTidxAclIndex ACL index and rlQosAceTidxIndex ACE index" INDEX { rlQosAceTidxAclIndex, rlQosAceTidxIndex} ::= { rlQosAceTidxTable 1 } RlQosAceTidxEntry ::= SEQUENCE { rlQosAceTidxAclIndex INTEGER, rlQosAceTidxIndex INTEGER, rlQosAceTidxAction AceActionType, rlQosAceTidxType AceObjectType, rlQosAceTidxTuple1 INTEGER, rlQosAceTidxTuple2 INTEGER, rlQosAceTidxTuple3 INTEGER, rlQosAceTidxTuple4 INTEGER, rlQosAceTidxTuple5 INTEGER, rlQosAceTidxTuple6 INTEGER, rlQosAceTidxTuple7 INTEGER, rlQosAceTidxTuple8 INTEGER, rlQosAceTidxAccount BinaryStatus, rlQosAceTidxStatus RowStatus, rlQosAceTidxTimeRange DisplayString, rlQosAceTidxTimeRangeIsActive TruthValue, rlQosAceTidxTuple9 INTEGER, rlQosAceTidxTuple10 INTEGER, rlQosAceTidxTuple11 INTEGER, rlQosAceTidxActionDropType RlQosAceTidxActionDropType } rlQosAceTidxAclIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary incremental Index for the ACL ACE connection." ::= { rlQosAceTidxEntry 1 } rlQosAceTidxIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An arbitrary incremental Index for the ACE table." ::= { rlQosAceTidxEntry 2 } rlQosAceTidxAction OBJECT-TYPE SYNTAX AceActionType MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Action to take." ::= { rlQosAceTidxEntry 3 } rlQosAceTidxType OBJECT-TYPE SYNTAX AceObjectType MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Type" ::= { rlQosAceTidxEntry 4 } rlQosAceTidxTuple1 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 5 } rlQosAceTidxTuple2 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 6 } rlQosAceTidxTuple3 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 7 } rlQosAceTidxTuple4 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 8 } rlQosAceTidxTuple5 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 9 } rlQosAceTidxTuple6 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 10 } rlQosAceTidxTuple7 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 11 } rlQosAceTidxTuple8 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 12 } rlQosAceTidxAccount OBJECT-TYPE SYNTAX BinaryStatus MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Accounting state. When set to 'enabled' than appropriate statistic's counter is provided for an ACE." ::= { rlQosAceTidxEntry 13 } rlQosAceTidxStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosAceTidxEntry 14 } rlQosAceTidxTimeRange OBJECT-TYPE SYNTAX DisplayString( SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "ACE time range name." ::= { rlQosAceTidxEntry 15 } rlQosAceTidxTimeRangeIsActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "ACE time range is rule active state shows is ACE currently active or not." ::= { rlQosAceTidxEntry 16 } rlQosAceTidxTuple9 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 17 } rlQosAceTidxTuple10 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 18 } rlQosAceTidxTuple11 OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "ACE Tuple pointer." ::= { rlQosAceTidxEntry 19 } rlQosAceTidxActionDropType OBJECT-TYPE SYNTAX RlQosAceTidxActionDropType MAX-ACCESS read-create STATUS current DESCRIPTION "This field is valid only if AceActionType is deny or deny-DisablePort." ::= { rlQosAceTidxEntry 20 } rlQosMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "MIB's version, the current version is 11 1 - original version 2 - Add new two MIB's items. - rlQosAceTidxTable - Ace table with two indexes - rlQosMibVersion. Change the unit in Policer table from bps to kbps 3 - Add new MIB's value for Textual convention QosObjectMode 4 - Add new MIBs rlQosDscpQueueDefaultMapTable 5 - Add new advanced action : trustCosDscp 6 - Add vpt,ether-type,tcp-flags,icmp-type,icmp-code,igmp-type to ClassTupleType Add ip-ICMP,ip-IGMP To AceObjectType Add vpt,ethertype To ClassOffsetType 7- Add rlQosPortRateLimitStatus,rlQosCirPortRateLimit, rlQosCbsPortRateLimit to rlQosIfPolicyTable 8 - Add Added rlQosDscpToDpTable 9 - Add statistics 10 - Add innerVlan to ClassOffsetType And inner-vlan to ClassTupleType 11 - Added rlQosCPUSafeGuardEnable" ::= { rlQosCliMib 32 } -- DSCP to Queue Default map table rlQosDscpQueueDefaultMapTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosDscpQueueDefaultMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to set default dscp to queue map" ::= { rlQosCliMib 33 } rlQosDscpQueueDefaultMapEntry OBJECT-TYPE SYNTAX RlQosDscpQueueDefaultMapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The entry is used to get index form particular name and table type." INDEX { rlQosDscpQueueDefaultMapDscp } ::= { rlQosDscpQueueDefaultMapTable 1 } RlQosDscpQueueDefaultMapEntry ::= SEQUENCE { rlQosDscpQueueDefaultMapDscp INTEGER, rlQosDscpQueueDefaultMapQueueId INTEGER } rlQosDscpQueueDefaultMapDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS read-only STATUS current DESCRIPTION "dscp , 6 bits of priority which determine the service class." ::= { rlQosDscpQueueDefaultMapEntry 1 } rlQosDscpQueueDefaultMapQueueId OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "the queue id vary from the first queue id to Max Number of queues supported" ::= { rlQosDscpQueueDefaultMapEntry 2 } -- QoS DSCP to DP Map rlQosDscpToDpTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosDscpToDpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The DSCP To Dp table" ::= { rlQosCliMib 34 } rlQosDscpToDpEntry OBJECT-TYPE SYNTAX RlQosDscpToDpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the new DP for the packet. The index is DSCP represent by rlQosDscp" INDEX { rlQosDscp } ::= { rlQosDscpToDpTable 1 } RlQosDscpToDpEntry ::= SEQUENCE { rlQosDscp INTEGER, rlQosDp INTEGER } rlQosDscp OBJECT-TYPE SYNTAX INTEGER (0..63) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Packet DSCP." ::= { rlQosDscpToDpEntry 1 } rlQosDp OBJECT-TYPE SYNTAX INTEGER (0..2) MAX-ACCESS read-create STATUS current DESCRIPTION "New DP." ::= { rlQosDscpToDpEntry 2 } rlQosStatistics OBJECT IDENTIFIER ::= { rlQosCliMib 35 } rlQosPortPolicyStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPortPolicyStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics counter for policies with specific actions " ::= { rlQosStatistics 1 } rlQosPortPolicyStatisticsEntry OBJECT-TYPE SYNTAX RlQosPortPolicyStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes counter per port. The index is port represent by rlIfIndex. In each entry represents counter, it's type , it's size and whether it's enabled." INDEX { rlIfIndex,rlIfType, rlQosPortPolicyStatisticsCntrType } ::= { rlQosPortPolicyStatisticsTable 1 } RlQosPortPolicyStatisticsEntry::= SEQUENCE { rlQosPortPolicyStatisticsCntrType StatisticsCntrType, rlQosPortPolicyStatisticsCntrNumOfBits StatisticsCntrNumOfBitsType, rlQosPortPolicyStatisticsEnableCounting TruthValue, rlQosPortPolicyStatisticsCounterValue Counter64 } rlQosPortPolicyStatisticsCntrType OBJECT-TYPE SYNTAX StatisticsCntrType MAX-ACCESS read-write STATUS current DESCRIPTION "Counter type." ::= { rlQosPortPolicyStatisticsEntry 1 } rlQosPortPolicyStatisticsCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits." ::= { rlQosPortPolicyStatisticsEntry 2 } rlQosPortPolicyStatisticsEnableCounting OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication whether the counter is enabled." DEFVAL { false } ::= { rlQosPortPolicyStatisticsEntry 3 } rlQosPortPolicyStatisticsCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter value." ::= { rlQosPortPolicyStatisticsEntry 4 } rlQosSinglePolicerStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosSinglePolicerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics counters per QoS meter " ::= { rlQosStatistics 2 } rlQosSinglePolicerStatisticsEntry OBJECT-TYPE SYNTAX RlQosSinglePolicerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes counter per meter. The index is port represent by RlQosMeterStatisticsPort and RlQosMeterStatisticsPolicerPointer. In each entry there are fields representing whether the counter for the meter is enabled and two counters value - for in-profile bytes and for out-of-profile bytes. " INDEX { rlIfIndex, rlQosPolicerIndex } ::= { rlQosSinglePolicerStatisticsTable 1 } RlQosSinglePolicerStatisticsEntry::= SEQUENCE { rlQosSinglePolicerStatisticsInProfileCounterValue Counter64, rlQosSinglePolicerStatisticsInProfileCntrNumOfBits StatisticsCntrNumOfBitsType, rlQosSinglePolicerStatisticsOutProfileCounterValue Counter64, rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits StatisticsCntrNumOfBitsType, rlQosSinglePolicerStatisticsStatus RowStatus } rlQosSinglePolicerStatisticsInProfileCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter value of in profile traffic." ::= { rlQosSinglePolicerStatisticsEntry 1 } rlQosSinglePolicerStatisticsInProfileCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits for in profile counter." ::= { rlQosSinglePolicerStatisticsEntry 2 } rlQosSinglePolicerStatisticsOutProfileCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter value of Out Profile traffic." ::= { rlQosSinglePolicerStatisticsEntry 3 } rlQosSinglePolicerStatisticsOutProfileCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits for out profile counter." ::= { rlQosSinglePolicerStatisticsEntry 4 } rlQosSinglePolicerStatisticsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlQosSinglePolicerStatisticsEntry 5 } rlQosAggregatePolicerStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosAggregatePolicerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics counters per QoS aggregate meter " ::= { rlQosStatistics 3 } rlQosAggregatePolicerStatisticsEntry OBJECT-TYPE SYNTAX RlQosAggregatePolicerStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes counter per aggregate meter. The index is rlQosPolicerIndex. In each entry there are fields representing whether the counter for the meter is enabled and three counters values - for green, yellow and red profiles bytes. " INDEX { rlQosPolicerIndex } ::= { rlQosAggregatePolicerStatisticsTable 1 } RlQosAggregatePolicerStatisticsEntry::= SEQUENCE { rlQosAggregatePolicerStatisticsInProfileCounterValue Counter64, rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits StatisticsCntrNumOfBitsType, rlQosAggregatePolicerStatisticsOutProfileCounterValue Counter64, rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits StatisticsCntrNumOfBitsType, rlQosAggregatePolicerStatisticsStatus RowStatus } rlQosAggregatePolicerStatisticsInProfileCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter value of In Profile amount of bytes." ::= { rlQosAggregatePolicerStatisticsEntry 1} rlQosAggregatePolicerStatisticsInProfileCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits for In Profile ." ::= { rlQosAggregatePolicerStatisticsEntry 2 } rlQosAggregatePolicerStatisticsOutProfileCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION " Counter value of Out Profile amount of bytes." ::= { rlQosAggregatePolicerStatisticsEntry 3 } rlQosAggregatePolicerStatisticsOutProfileCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits for Out Profile." ::= { rlQosAggregatePolicerStatisticsEntry 4 } rlQosAggregatePolicerStatisticsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlQosAggregatePolicerStatisticsEntry 5 } rlQosOutQueueStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosOutQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics counters per VLAN/Port/Queue/Drop Precedence " ::= { rlQosStatistics 4 } rlQosOutQueueStatisticsEntry OBJECT-TYPE SYNTAX RlQosOutQueueStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes counter per any permutation of Port/VLAN/Queue/Drop Precedence. Each of the above can a group off 'All'. The index is port represent by rlQosOutQueueStatisticsCountrID. In each entry there are fields representing whether the counter is enabled and counters value. " INDEX {rlQosOutQueueStatisticsCountrID} ::= { rlQosOutQueueStatisticsTable 1 } RlQosOutQueueStatisticsEntry::= SEQUENCE { rlQosOutQueueStatisticsCountrID INTEGER, rlQosOutQueueStatisticsIfIndexList PortList, rlQosOutQueueStatisticsPortAll TruthValue, rlQosOutQueueStatisticsVlan INTEGER, rlQosOutQueueStatisticsVlanAll TruthValue, rlQosOutQueueStatisticsQueue INTEGER, rlQosOutQueueStatisticsQueueAll TruthValue, rlQosOutQueueStatisticsDP StatisticsDPType, rlQosOutQueueStatisticsDPAll TruthValue, rlQosOutQueueStatisticsCounterTailDropValue Counter64, rlQosOutQueueStatisticsCounterAllValue Counter64, rlQosOutQueueStatisticsCntrNumOfBits StatisticsCntrNumOfBitsType, rlQosOutQueueStatisticsStatus RowStatus } rlQosOutQueueStatisticsCountrID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "Counter id, the key of the table." ::= { rlQosOutQueueStatisticsEntry 1 } rlQosOutQueueStatisticsIfIndexList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "Port for which the flow is counted." ::= { rlQosOutQueueStatisticsEntry 2 } rlQosOutQueueStatisticsPortAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the port is configured as range of all the ports" ::= {rlQosOutQueueStatisticsEntry 3 } rlQosOutQueueStatisticsVlan OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "VLAN for which the flow is counted." ::= { rlQosOutQueueStatisticsEntry 4 } rlQosOutQueueStatisticsVlanAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the VLAN is configured as range of all the VLANS" ::= { rlQosOutQueueStatisticsEntry 5 } rlQosOutQueueStatisticsQueue OBJECT-TYPE SYNTAX INTEGER(1..8) MAX-ACCESS read-write STATUS current DESCRIPTION "Queue for which the flow is counted." ::= { rlQosOutQueueStatisticsEntry 6 } rlQosOutQueueStatisticsQueueAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the queue is configured as range of all the Queues" ::= { rlQosOutQueueStatisticsEntry 7 } rlQosOutQueueStatisticsDP OBJECT-TYPE SYNTAX StatisticsDPType MAX-ACCESS read-write STATUS current DESCRIPTION "Drop Precedence for which the flow is counted." ::= { rlQosOutQueueStatisticsEntry 8 } rlQosOutQueueStatisticsDPAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indication for whether the DP is configured as range of all the DPs" ::= { rlQosOutQueueStatisticsEntry 9} rlQosOutQueueStatisticsCounterTailDropValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter for tail dropped value." ::= { rlQosOutQueueStatisticsEntry 10 } rlQosOutQueueStatisticsCounterAllValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The counter for all traffic value." ::= { rlQosOutQueueStatisticsEntry 11 } rlQosOutQueueStatisticsCntrNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits for the counter." ::= { rlQosOutQueueStatisticsEntry 12 } rlQosOutQueueStatisticsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlQosOutQueueStatisticsEntry 13 } -- Global Counter for statistics rlQosGlobalStatisticsCntrsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosGlobalStatisticsCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies statistics global counters for specific rules for all ports that they are connected to " ::= { rlQosStatistics 5 } rlQosGlobalStatisticsCntrsEntry OBJECT-TYPE SYNTAX RlQosGlobalStatisticsCntrsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry represents global counter." INDEX {rlQosGlobalStatisticsCntrsType} ::= { rlQosGlobalStatisticsCntrsTable 1 } RlQosGlobalStatisticsCntrsEntry::= SEQUENCE { rlQosGlobalStatisticsCntrsType StatisticsCntrType, rlQosGlobalStatisticsCntrsNumOfBits StatisticsCntrNumOfBitsType, rlQosGlobalStatisticsCntrsCounterValue Counter64, rlQosGlobalStatisticsStatus RowStatus } rlQosGlobalStatisticsCntrsType OBJECT-TYPE SYNTAX StatisticsCntrType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter type." ::= { rlQosGlobalStatisticsCntrsEntry 1 } rlQosGlobalStatisticsCntrsNumOfBits OBJECT-TYPE SYNTAX StatisticsCntrNumOfBitsType MAX-ACCESS read-only STATUS current DESCRIPTION "Counter size in bits." ::= { rlQosGlobalStatisticsCntrsEntry 2 } rlQosGlobalStatisticsCntrsCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "Counter value." ::= { rlQosGlobalStatisticsCntrsEntry 3 } rlQosGlobalStatisticsStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of a table entry. It is used to delete an entry from this table." ::= { rlQosGlobalStatisticsCntrsEntry 4 } -- clear scalar rlQosClearCounters OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar indicates to clear all the counters." ::= { rlQosStatistics 6 } -- CLI QoS Classifier Utilization rlQosClassifierUtilization OBJECT IDENTIFIER ::= { rlQosCliMib 36 } rlQosClassifierUtilizationTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosClassifierUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing Classifier utilization information. Each row represents objects for a particular Unit present in this system." ::= { rlQosClassifierUtilization 1 } rlQosClassifierUtilizationEntry OBJECT-TYPE SYNTAX RlQosClassifierUtilizationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A Single entry containing Classifier utilization information." INDEX { rlQosClassifierUtilizationUnitId } ::= { rlQosClassifierUtilizationTable 1 } RlQosClassifierUtilizationEntry ::= SEQUENCE { rlQosClassifierUtilizationUnitId Unsigned32, rlQosClassifierUtilizationPercent Unsigned32, rlQosClassifierUtilizationRulesNumber Unsigned32, rlQosClassifierUtilizationFreeRulesNumber Unsigned32 } rlQosClassifierUtilizationUnitId OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Unit ID of this Classifier. must be unique per entry. This is an index into the table." ::= { rlQosClassifierUtilizationEntry 1 } rlQosClassifierUtilizationPercent OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The classifier utilization percentage. " DEFVAL { 0 } ::= { rlQosClassifierUtilizationEntry 2 } rlQosClassifierUtilizationRulesNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The classifier utilization number of used rules, in short rules resolution." DEFVAL { 0 } ::= { rlQosClassifierUtilizationEntry 3 } rlQosClassifierUtilizationFreeRulesNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The classifier utilization number of not used yet rules on the unit, in short rules resolution." DEFVAL { 0 } ::= { rlQosClassifierUtilizationEntry 4 } rlQosClassifierUtilizationSystem OBJECT-TYPE SYNTAX Unsigned32 (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "The system classifier utilization percentage. " ::= { rlQosClassifierUtilization 2 } rlQosClassifierRulesNumberUtilizationSystem OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of used rules per system, in short rule resolution " ::= { rlQosClassifierUtilization 3 } rlQosClassifierFreeRulesNumUtilizationSystem OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Number of free rules per system, in short rule resolution " ::= { rlQosClassifierUtilization 4 } rlQosClassifierMaxRulesNumberUtilizationSystem OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of rules per system, in short rule resolution " ::= { rlQosClassifierUtilization 5 } -- CLI QoS Port to Profile Mapping Table rlQosPortToProfileMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPortToProfileMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table maps between port and profile" ::= { rlQosCliMib 37 } rlQosPortToProfileMappingEntry OBJECT-TYPE SYNTAX RlQosPortToProfileMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes mapping between port and profile" INDEX { rlQosPort } ::= { rlQosPortToProfileMappingTable 1 } RlQosPortToProfileMappingEntry ::= SEQUENCE { rlQosPort INTEGER, rlQosProfileName DisplayString } rlQosPort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Port number" ::= { rlQosPortToProfileMappingEntry 1 } rlQosProfileName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "profile" ::= { rlQosPortToProfileMappingEntry 2 } rlQosCPUSafeGuardEnable OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar enables/disables CPU Safeguard." ::= { rlQosCliMib 38 } --QoS Policy Class map priotiry refernce table rlQosPolicyClassPriorityRefTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosPolicyClassPriorityRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table specifies The relationship between policy map to class map" ::= { rlQosCliMib 39 } rlQosPolicyClassPriorityRefEntry OBJECT-TYPE SYNTAX RlQosPolicyClassPriorityRefEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table describes the connection between class-map entry to policy map by using pointers. The index is Class map pointer represent by rlQosPolicyClassRefClassPointer. It is also specifies the class-map priotiry in the policy-map, which set the rules order within the policy-map" INDEX { rlQosPolicyClassPriorityRefPriority, rlQosPolicyClassPriorityRefClassPointer} ::= { rlQosPolicyClassPriorityRefTable 1 } RlQosPolicyClassPriorityRefEntry ::= SEQUENCE { rlQosPolicyClassPriorityRefPriority INTEGER, rlQosPolicyClassPriorityRefClassPointer INTEGER, rlQosPolicyClassPriorityRefPolicyPointer INTEGER, rlQosPolicyClassPriorityRefStatus RowStatus } rlQosPolicyClassPriorityRefPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "The class-map priority within the policy-map" ::= { rlQosPolicyClassPriorityRefEntry 1 } rlQosPolicyClassPriorityRefClassPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Class-map index Pointer" ::= { rlQosPolicyClassPriorityRefEntry 2 } rlQosPolicyClassPriorityRefPolicyPointer OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-create STATUS current DESCRIPTION "Policy map index Pointer" ::= { rlQosPolicyClassPriorityRefEntry 3 } rlQosPolicyClassPriorityRefStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a table entry. It is used to delete/Add an entry from this table." ::= { rlQosPolicyClassPriorityRefEntry 4 } rlQosDenyAceStatisticsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosDenyAceStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds statistics for deny ACEs." ::= { rlQosCliMib 42 } rlQosDenyAceStatisticsEntry OBJECT-TYPE SYNTAX RlQosDenyAceStatisticsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry in this table holds number of hits for deny ACEs attached to specific Interface." INDEX { rlQosDenyAceStatisticsIfIndex } ::= { rlQosDenyAceStatisticsTable 1 } RlQosDenyAceStatisticsEntry ::= SEQUENCE { rlQosDenyAceStatisticsIfIndex INTEGER, rlQosDenyAceStatisticsIfCounter INTEGER } rlQosDenyAceStatisticsIfIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Interface Index." ::= { rlQosDenyAceStatisticsEntry 1 } rlQosDenyAceStatisticsIfCounter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hits on deny ACEs for this interface." ::= { rlQosDenyAceStatisticsEntry 2 } rlQosDenyAceStatisticsOtherFlowCounter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Number of hits on deny ACEs for 'Other'-type flow." ::= { rlQosCliMib 43 } rlQosDenyAceStatisticsClearIfCounters OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Keeps ifIndex a port or trunk or vlan that its hit counters should be reset. If the value is 0 then all interfaces counters must be reset. " ::= { rlQosCliMib 44 } rlQosDenyAceStatisticsClearOtherFlowCounter OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar indicates clearing 'Other'-type flow counter operation." ::= { rlQosCliMib 45 } rlQosModeGlobalCfgTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosModeGlobalCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode." ::= { rlQosCliMib 46 } rlQosModeGlobalCfgEntry OBJECT-TYPE SYNTAX RlQosModeGlobalCfgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table responsible to set the global qos mode configuration: qos mode, qos trust mode, and if port are trusted by default in qos advanced mode. Current implemnetaion assumes only one entry exist." INDEX { rlQosGlobalIndex} ::= { rlQosModeGlobalCfgTable 1 } RlQosModeGlobalCfgEntry ::= SEQUENCE { rlQosGlobalIndex INTEGER, rlQosGlobalQoSMode QosGlobalMode, rlQosBasicGlobalTrustMode QosTrustMode, rlQosAdvcGlobalTrustMode QosTrustMode, rlQoSPortTrustAdvancedMode TruthValue, rlQosDscpMutationEnable TruthValue, rlQosModeGlobalCfgStatus RowStatus } rlQosGlobalIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry index - currenly only one entry can exist, indexes hard coded with value '1'." ::= { rlQosModeGlobalCfgEntry 1 } rlQosGlobalQoSMode OBJECT-TYPE SYNTAX QosGlobalMode MAX-ACCESS read-write STATUS current DESCRIPTION "This field replaces deprecated scalar rlQosCliQosMode. Defines the global qos operation mode: disable, basic or advnaced. " ::= { rlQosModeGlobalCfgEntry 2 } rlQosBasicGlobalTrustMode OBJECT-TYPE SYNTAX QosTrustMode MAX-ACCESS read-write STATUS current DESCRIPTION "This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos basic mode. " ::= { rlQosModeGlobalCfgEntry 3 } rlQosAdvcGlobalTrustMode OBJECT-TYPE SYNTAX QosTrustMode MAX-ACCESS read-write STATUS current DESCRIPTION "This field replaces deprecated scalar rlQosCliBasicModeCfg. Defines the global qos trust operation mode relevant for qos advanced mode. " ::= { rlQosModeGlobalCfgEntry 4 } rlQoSPortTrustAdvancedMode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field specified whether ports are set to trused or not-trusted by default when switching to qos advanced mode." DEFVAL{ false } ::= { rlQosModeGlobalCfgEntry 5 } rlQosDscpMutationEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This field indicates if dscp to dscp mutation mode is enable. It can be set to true in the following terms: 1.rlQosGlobalTrustMode is in {dscp, vpt-dscp} ( rlQosGlobalQoSMode must be basic or advanced) 2.if rlQosGlobalQoSMode is advanced then rlQoSPortTrustAdvancedMode must be set to true." DEFVAL{ false } ::= { rlQosModeGlobalCfgEntry 6 } rlQosModeGlobalCfgStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This status of entry action. In current implementation only one entry exist, therefor only status = active is acceptable." ::= { rlQosModeGlobalCfgEntry 7 } -- ClassMapCounterTable rlQosClassMapCounterTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosClassMapCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to show statistics for ACL applied on an interface." ::= { rlQosCliMib 47 } rlQosClassMapCounterEntry OBJECT-TYPE SYNTAX RlQosClassMapCounterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry returns the value of the class map counter. Entry is added/deleted to this MIB when counting is enabled/disabled on the class map. The counter is set to zero upon reading its value." INDEX { rlQosClassMapIndex } ::= { rlQosClassMapCounterTable 1 } RlQosClassMapCounterEntry ::= SEQUENCE { rlQosClassMapCounterValue Counter64 } rlQosClassMapCounterValue OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This field returns the current value of the class map counter. " ::= { rlQosClassMapCounterEntry 2 } --- rlQosApplicationTrapIdTable rlQosApplicationTrapIdTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosApplicationTrapIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The read only table is used to get the trapId assisated to application wants to use the trap action in the class map table" ::= { rlQosCliMib 48 } rlQosApplicationTrapIdEntry OBJECT-TYPE SYNTAX RlQosApplicationTrapIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry holds the trapId for application using the trap action in the class map table." INDEX { IMPLIED rlQosApplicationName } ::= { rlQosApplicationTrapIdTable 1 } RlQosApplicationTrapIdEntry ::= SEQUENCE { rlQosApplicationName DisplayString, rlQosApplicationTrapId INTEGER } rlQosApplicationName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This field represents the application name and traffic type. " ::= { rlQosApplicationTrapIdEntry 1 } rlQosApplicationTrapId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This field defines the trap id to be use in the class map entry. " ::= { rlQosApplicationTrapIdEntry 2 } -- RevitalR 1-Feb-2012: add new scalar to define application-specific default action rlQoSApplicationDefaultAction OBJECT-TYPE SYNTAX RlQosApplicationDefaultActionType MAX-ACCESS read-write STATUS current DESCRIPTION "This scalar specifies application-specific default action" ::= { rlQosCliMib 49 } rlQosLogInputInterfacesAceMatchedTable OBJECT-TYPE SYNTAX SEQUENCE OF RlQosLogInputInterfacesAceMatchedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds a list and of ACE matched log-input option interfaces." ::= { rlQosCliMib 50 } rlQosLogInputInterfacesAceMatchedEntry OBJECT-TYPE SYNTAX RlQosLogInputInterfacesAceMatchedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table holds only one entry of port list and vlan list." INDEX { rlQosLogInputInterfacesAceMatchedIndex } ::= { rlQosLogInputInterfacesAceMatchedTable 1 } RlQosLogInputInterfacesAceMatchedEntry ::= SEQUENCE { rlQosLogInputInterfacesAceMatchedIndex INTEGER, rlQosLogInputInterfacesAceMatchedPorts PortList, rlQosLogInputInterfacesAceMatchedVlanList1to1024 VlanList1, rlQosLogInputInterfacesAceMatchedVlanList1025to2048 VlanList2, rlQosLogInputInterfacesAceMatchedVlanList2049to3072 VlanList3, rlQosLogInputInterfacesAceMatchedVlanList3073to4094 VlanList4 } rlQosLogInputInterfacesAceMatchedIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index is entrie's sequence." ::= { rlQosLogInputInterfacesAceMatchedEntry 1 } rlQosLogInputInterfacesAceMatchedPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "the matched log-input ACEs port list" ::= { rlQosLogInputInterfacesAceMatchedEntry 2} rlQosLogInputInterfacesAceMatchedVlanList1to1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-only STATUS current DESCRIPTION "the matched log-input ACEs vlan list from 1 to 1024." ::= { rlQosLogInputInterfacesAceMatchedEntry 3} rlQosLogInputInterfacesAceMatchedVlanList1025to2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-only STATUS current DESCRIPTION "the matched log-input ACEs vlan list from 1025 to 2048." ::= { rlQosLogInputInterfacesAceMatchedEntry 4} rlQosLogInputInterfacesAceMatchedVlanList2049to3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-only STATUS current DESCRIPTION "the matched log-input ACEs vlan list from 2049 to 3072." ::= { rlQosLogInputInterfacesAceMatchedEntry 5} rlQosLogInputInterfacesAceMatchedVlanList3073to4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-only STATUS current DESCRIPTION "the matched log-input ACEs vlan list from 3073 to 4094." ::= { rlQosLogInputInterfacesAceMatchedEntry 6} END