CISCOSB-EVENTS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, TruthValue, RowStatus FROM SNMPv2-TC switch001 FROM CISCOSB-MIB Counter FROM RFC1155-SMI InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB RlSmartPortsMacroNameOrZero FROM CISCOSB-SMARTPORTS-MIB; rlEventsMib MODULE-IDENTITY LAST-UPDATED "201009110000Z" ORGANIZATION "Cisco Small Business" CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Home http://www.cisco.com/smb>;, Cisco Small Business Support Community " DESCRIPTION "MTS events MIB." REVISION "201009110000Z" DESCRIPTION "Initial revision." ::= { switch001 150 } -- -- rlEvents MIB -- SmartPortType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Supported smart port types." SYNTAX INTEGER { unknown(1), default(2), printer(3), desktop(4), guest(5), server(6), host(7), ip-camera(8), ip-phone(9), ip-phone-desktop(10), switch(11), router(12), ap(13) } SmartPortMacroParameterName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Smart macro parameter name." SYNTAX DisplayString(SIZE(1..32)) SmartPortMacroParameterValue ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Smart macro parameter value." SYNTAX DisplayString(SIZE(1..80)) SmartPortMacroType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Smart macro type - built-in or user-defined." SYNTAX INTEGER {built-in(1), user-defined(2)} SmartPortMacroParameterOrder ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Smart macro parameter order." SYNTAX INTEGER {single(1), first(2), middle(3), last(4)} rlPortEvents OBJECT IDENTIFIER ::= { rlEventsMib 1} rlAutoSmartPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2), controlled(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "disabled - Auto Smart port feature is administratively disabled. enabled - Auto Smart port feature is administratively enabled. controlled - Auto Smart port feature is administratively controlled by VOICE VLAN. " DEFVAL {controlled} ::= { rlPortEvents 1 } rlAutoSmartPortOperStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "disabled - Auto Smart port feature is operationally disabled. enabled - Auto Smart port feature is operationally enabled. " DEFVAL {disabled} ::= { rlPortEvents 2 } rlAutoSmartPortLastVoiceVlanStatus OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated last status set by VOICE VLAN feature. If rlAutoSmartPortAdminStatus has 'controlled' value then the value of this object is the same as rlAutoSmartPortOperStatus. enabled - Auto Smart port feature should be operationally enabled, if rlAutoSmartPortAdminStatus has 'controlled' value. disabled - Auto Smart port feature should be operationally disabled, if rlAutoSmartPortAdminStatus has 'controlled' value " DEFVAL {disabled} ::= { rlPortEvents 3} rlAutoSmartPortLastVoiceVlanId OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicated last VOICE VLAN ID set by VOICE VLAN feature." ::= { rlPortEvents 4} rlAutoSmartPortLearningProtocols OBJECT-TYPE SYNTAX BITS { cdp (0), lldp (1) } MAX-ACCESS read-write STATUS current DESCRIPTION "cdp - Information about device type of neighboring devices(s) is learnt via CDP (Cisco Discovery Protocol) advertisements. lldp - Information about device type of neighboring devices(s) is learnt via LLDP (Link Layer Discovery Protocol ) advertisements. " ::= { rlPortEvents 5 } rlAutoSmartPortTypesTable OBJECT-TYPE SYNTAX SEQUENCE OF RlAutoSmartPortTypesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to keep all the information related to a specific port type." ::= { rlPortEvents 6 } rlAutoSmartPortTypesEntry OBJECT-TYPE SYNTAX RlAutoSmartPortTypesEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlAutoSmartPortTypesTable." INDEX { rlAutoSmartPortTypesType } ::= { rlAutoSmartPortTypesTable 1 } RlAutoSmartPortTypesEntry ::= SEQUENCE { rlAutoSmartPortTypesType SmartPortType, rlAutoSmartPortTypeStatus INTEGER, rlAutoSmartPortMacro RlSmartPortsMacroNameOrZero, rlAutoSmartPortTypesRevertToDefaultMacro TruthValue, rlAutoSmartPortTypesRevertToDefaultParams TruthValue, rlAutoSmartPortTypesBuiltinMacro SmartPortMacroType } rlAutoSmartPortTypesType OBJECT-TYPE SYNTAX SmartPortType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Smart port type." ::= { rlAutoSmartPortTypesEntry 1 } rlAutoSmartPortTypeStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), default(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Smart port type global status. " ::= { rlAutoSmartPortTypesEntry 2 } rlAutoSmartPortMacro OBJECT-TYPE SYNTAX RlSmartPortsMacroNameOrZero MAX-ACCESS read-write STATUS current DESCRIPTION "Macro to be activated when a port is set to the smart port type indicated by rlAutoSmartPortTypesType. The macro whose name is 'no_' is activated when a port ceases to be of this smart port type. " ::= { rlAutoSmartPortTypesEntry 3 } rlAutoSmartPortTypesRevertToDefaultMacro OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object will cause the smart port type macro associated with this smart port type to revert to the default macro. " ::= { rlAutoSmartPortTypesEntry 4 } rlAutoSmartPortTypesRevertToDefaultParams OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object will cause the default smart port type parameter values associated with the built-in macro of this smart port type to revert to their default values." ::= { rlAutoSmartPortTypesEntry 5 } rlAutoSmartPortTypesBuiltinMacro OBJECT-TYPE SYNTAX SmartPortMacroType MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the macro is built-in or user defined." ::= { rlAutoSmartPortTypesEntry 6 } rlAutoSmartPortMacrosParamTable OBJECT-TYPE SYNTAX SEQUENCE OF RlAutoSmartPortMacrosParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to keep all the default parameter values related to a specific port type." ::= { rlPortEvents 7 } rlAutoSmartPortMacrosParamEntry OBJECT-TYPE SYNTAX RlAutoSmartPortMacrosParamEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A parameter name & default value pair for a smart port type macro." INDEX { rlAutoSmartPortTypesType, rlAutoSmartPortMacroType, IMPLIED rlAutoSmartPortMacrosParamName } ::= { rlAutoSmartPortMacrosParamTable 1 } RlAutoSmartPortMacrosParamEntry ::= SEQUENCE { rlAutoSmartPortMacroType SmartPortMacroType, rlAutoSmartPortMacrosParamName SmartPortMacroParameterName, rlAutoSmartPortMacrosParamOrder SmartPortMacroParameterOrder, rlAutoSmartPortMacrosParamValue SmartPortMacroParameterValue } rlAutoSmartPortMacroType OBJECT-TYPE SYNTAX SmartPortMacroType MAX-ACCESS not-accessible STATUS current DESCRIPTION "Macro type - built-in or user defined." ::= { rlAutoSmartPortMacrosParamEntry 1 } rlAutoSmartPortMacrosParamName OBJECT-TYPE SYNTAX SmartPortMacroParameterName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the parameter to be supplied at smart port macro activation. " ::= { rlAutoSmartPortMacrosParamEntry 2 } rlAutoSmartPortMacrosParamOrder OBJECT-TYPE SYNTAX SmartPortMacroParameterOrder MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row. Setting this object to 'middle' instructs the system to wait for further parameters. Setting this object to 'last' informs the system that no further parameters will be sent and therefore it can start the macro or builtin parameters change process. Setting this object to 'single' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row and informs the system that no further parameters will be sent and therefore it can start macro or builtin parameters change process." ::= { rlAutoSmartPortMacrosParamEntry 3 } rlAutoSmartPortMacrosParamValue OBJECT-TYPE SYNTAX SmartPortMacroParameterValue MAX-ACCESS read-write STATUS current DESCRIPTION "Default value of the parameter to be supplied at smart port macro activation. " ::= { rlAutoSmartPortMacrosParamEntry 4 } rlAutoSmartPortPortsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlAutoSmartPortPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table is used to keep all the auto smart port information related to a specific port." ::= { rlPortEvents 8 } rlAutoSmartPortPortsEntry OBJECT-TYPE SYNTAX RlAutoSmartPortPortsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlAutoSmartPortPortsTable." INDEX { rlAutoSmartPortPort } ::= { rlAutoSmartPortPortsTable 1 } RlAutoSmartPortPortsEntry ::= SEQUENCE { rlAutoSmartPortPort InterfaceIndex, rlAutoSmartPortPortStatus INTEGER, rlAutoSmartPortPortType SmartPortType, rlAutoSmartPortPersistency INTEGER, rlAutoSmartPortLearntPortType SmartPortType, rlAutoSmartPortPortAcquiringType INTEGER, rlAutoSmartPortLastActivatedMacro RlSmartPortsMacroNameOrZero, rlAutoSmartPortFailedCommandNumber INTEGER, rlAutoSmartPortSetLearntPortType TruthValue } rlAutoSmartPortPort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port to which the smartport information is associated." ::= { rlAutoSmartPortPortsEntry 1 } rlAutoSmartPortPortStatus OBJECT-TYPE SYNTAX INTEGER {enabled(1), disabled(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether auto smart port feature is enabled or not on this port." DEFVAL { enabled } ::= { rlAutoSmartPortPortsEntry 2 } rlAutoSmartPortPortType OBJECT-TYPE SYNTAX SmartPortType MAX-ACCESS read-write STATUS current DESCRIPTION "Smart port type associated with this port. If set by user, the port will retain the smart port type at link down, link not present and reboot events." DEFVAL { default } ::= { rlAutoSmartPortPortsEntry 3 } rlAutoSmartPortPersistency OBJECT-TYPE SYNTAX INTEGER {persistent(1), not-persistent(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "If set to persistent then, if the system concludes, according to the information learnt there is no relevant device connected to the port, the rlAutoSmartPortPortType will not be changed (as if the user set this rlAutoSmartPortPortType himself), except on learning another rlAutoSmartPortPortType." DEFVAL { not-persistent } ::= { rlAutoSmartPortPortsEntry 4 } rlAutoSmartPortLearntPortType OBJECT-TYPE SYNTAX SmartPortType MAX-ACCESS read-only STATUS current DESCRIPTION "Smart port type learnt via the learning protocols. This value will be different from rlAutoSmartPortPortType only if rlAutoSmartPortPortType was manually configured (i.e. if the value of rlAutoSmartPortPortAcquiringType is 'configuration'). The value of the object is used to set the value of rlAutoSmartPortPortType if the user removes the configuration." DEFVAL { default } ::= { rlAutoSmartPortPortsEntry 5 } rlAutoSmartPortPortAcquiringType OBJECT-TYPE SYNTAX INTEGER {default(1), configuration(2), persistency(3), learning(4)} MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the way that the value of rlAutoSmartPortPortType was acquired. This object can be set only during configuration download." ::= { rlAutoSmartPortPortsEntry 6 } rlAutoSmartPortLastActivatedMacro OBJECT-TYPE SYNTAX RlSmartPortsMacroNameOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates macro name of last activated macro or 'no macro' if no macro was run." ::= { rlAutoSmartPortPortsEntry 7 } rlAutoSmartPortFailedCommandNumber OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates number of command (starting with 1) that caused the macro failure or 0 if the macro succeeded or no macro was run." ::= { rlAutoSmartPortPortsEntry 8 } rlAutoSmartPortSetLearntPortType OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Instructs the system to set the port type to the learnt port type." ::= { rlAutoSmartPortPortsEntry 9 } rlAutoSmartPortParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlAutoSmartPortActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table optionally determines the parameter values for the macro that is activated when the smartport type is manually changed for a specific port or trunk via the rlAutoSmartPortPortType object." ::= { rlPortEvents 9 } rlAutoSmartPortParamsEntry OBJECT-TYPE SYNTAX RlAutoSmartPortActionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A parameter name & immediate value." INDEX { rlAutoSmartPortIfIndex, IMPLIED rlAutoSmartPortParamName } ::= { rlAutoSmartPortParamsTable 1 } RlAutoSmartPortActionParamsEntry ::= SEQUENCE { rlAutoSmartPortIfIndex InterfaceIndex, rlAutoSmartPortParamName SmartPortMacroParameterName, rlAutoSmartPortParamOrder SmartPortMacroParameterOrder, rlAutoSmartPortParamValue SmartPortMacroParameterValue } rlAutoSmartPortIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The port or trunk that this entry is associated with. " ::= { rlAutoSmartPortParamsEntry 1 } rlAutoSmartPortParamName OBJECT-TYPE SYNTAX SmartPortMacroParameterName MAX-ACCESS not-accessible STATUS current DESCRIPTION "Name of the parameter whose value must be supplied at a smart port macro activation. " ::= { rlAutoSmartPortParamsEntry 2 } rlAutoSmartPortParamOrder OBJECT-TYPE SYNTAX SmartPortMacroParameterOrder MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to 'first' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row. Setting this object to 'middle' instructs the system to wait for further parameters. Setting this object to 'last' informs the system that no further parameters will be sent and therefore it can start applying the smartport type. Setting this object to 'single' instructs the system to erase all previous information associated with the rlAutoSmartPortTypesType and rlAutoSmartPortMacroType associated with this conceptual row and informs the system that no further parameters will be sent and informs the system that no further parameters will be sent and therefore it can start applying the smartport type." ::= { rlAutoSmartPortParamsEntry 3 } rlAutoSmartPortParamValue OBJECT-TYPE SYNTAX SmartPortMacroParameterValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "Value of the parameter whose value must be supplied at a smart port macro activation. " ::= { rlAutoSmartPortParamsEntry 4 } rlAutoSmartTrunkRefreshTable OBJECT-TYPE SYNTAX SEQUENCE OF RlAutoSmartTrunkRefreshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Setting this object causes running the SmartPort macros of the following types: router, switch and ap. This operation is called the trunk refresh operation." ::= { rlPortEvents 10 } rlAutoSmartTrunkRefreshEntry OBJECT-TYPE SYNTAX RlAutoSmartTrunkRefreshEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry (conceptual row) in the rlAutoSmartTrunkRefreshTable." INDEX { rlAutoSmartTrunkRefreshSmartPortType, rlAutoSmartTrunkRefreshIfIndex } ::= { rlAutoSmartTrunkRefreshTable 1 } RlAutoSmartTrunkRefreshEntry ::= SEQUENCE { rlAutoSmartTrunkRefreshSmartPortType INTEGER, rlAutoSmartTrunkRefreshIfIndex InterfaceIndexOrZero, rlAutoSmartTrunkRefreshRowStatus RowStatus } rlAutoSmartTrunkRefreshSmartPortType OBJECT-TYPE SYNTAX INTEGER {default(1), switch(11), router(12), ap(13)} MAX-ACCESS not-accessible STATUS current DESCRIPTION "If not default the trunk refresh operation will be carried out on all ports of this smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the port specifed by rlAutoSmartTrunkRefreshIfIndex if it's type matches the given this smart port type (if not matching a wrong-value error will be return). If default the trunk refresh operation will be carried out on all ports of router, switch and ap smart port type if rlAutoSmartTrunkRefreshIfIndex is nonzero, or on the port specifed by rlAutoSmartTrunkRefreshIfIndex." ::= { rlAutoSmartTrunkRefreshEntry 1 } rlAutoSmartTrunkRefreshIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "If 0 the trunk refresh operation will be carried out on all ports of the smart port type as specified in the rlAutoSmartTrunkRefreshSmartPortType. If nonzero the trunk refresh operation will be carried out on the specified port, if rlAutoSmartTrunkRefreshSmartPortType is default or matches the smart port type of the specified port. Any other case will result in a wrong-value error." ::= { rlAutoSmartTrunkRefreshEntry 2 } rlAutoSmartTrunkRefreshRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Since this an action table only createAndGo will be accepted and the conceptual row will vanish immediately after the action execution." ::= { rlAutoSmartTrunkRefreshEntry 3 } rlAutoSmartBusy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true indicates that the autosmartports system is temporarily busy performing a multiport operation and therefore can not service management requests for the time-being." ::= { rlPortEvents 11 } END