CISCOSB-DHCP-MIB DEFINITIONS ::= BEGIN -- Title: CISCOSB DHCP Server ROS -- This Private MIB supports the DHCP Server for ROS -- Version: 7.30 -- Date: 18 Oct 2003 IMPORTS OBJECT-TYPE, IpAddress, Unsigned32, MODULE-IDENTITY FROM SNMPv2-SMI DisplayString, TruthValue, RowStatus FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB switch001 FROM CISCOSB-MIB PortList FROM Q-BRIDGE-MIB VlanList1, VlanList2, VlanList3, VlanList4 FROM CISCOSB-BRIDGEMIBOBJECTS-MIB; rsDHCP MODULE-IDENTITY LAST-UPDATED "200310180000Z" ORGANIZATION "Cisco Small Business" CONTACT-INFO "Postal: 170 West Tasman Drive San Jose , CA 95134-1706 USA Website: Cisco Small Business Home http://www.cisco.com/smb>;, Cisco Small Business Support Community " DESCRIPTION "The private MIB module definition for DHCP server support in CISCOSB devices." REVISION "200310180000Z" DESCRIPTION "Initial version of this MIB." ::= { switch001 38 } -- unused: -- { rsDHCP 1 } .. { rsDHCP 13 } rsDhcpMibVersion OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP MIB's version, the current version is 4." ::= { rsDHCP 14 } -- unused: -- { rsDHCP 15 } .. { rsDHCP 21 } -- ======================================================= -- DHCP Relay -- ======================================================= rlDhcpRelayMaximalNumberOfNonIpVlans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximal number non-ip vlans that DHCP relay can be confirued on." -- DEFVAL { 0 } ::= { rsDHCP 23 } rlDhcpRelayCurrentNumberOfNonIpVlans OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Current number non-ip vlans that DHCP relay can be confirued on." -- DEFVAL { 0 } ::= { rsDHCP 24 } rlDhcpRelayEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or disable the use of the DHCP relay." -- DEFVAL { false } ::= { rsDHCP 25 } rlDhcpRelayExists OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows whether the device can function as a DHCP Relay Agent." ::= { rsDHCP 26 } -- Next Servers Table rlDhcpRelayNextServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpRelayNextServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DHCP Relay Next Servers configuration Table" ::= { rsDHCP 27 } rlDhcpRelayNextServerEntry OBJECT-TYPE SYNTAX RlDhcpRelayNextServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. DHCP requests are relayed to the specified next server according to their threshold values." INDEX { rlDhcpRelayNextServerIpAddr } ::= { rlDhcpRelayNextServerTable 1 } RlDhcpRelayNextServerEntry ::= SEQUENCE { rlDhcpRelayNextServerIpAddr IpAddress, rlDhcpRelayNextServerSecThreshold Unsigned32, rlDhcpRelayNextServerRowStatus RowStatus } rlDhcpRelayNextServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IPAddress of the next configuration server. DHCP Server may act as a DHCP relay if this parameter is not equal to 0.0.0.0." ::= { rlDhcpRelayNextServerEntry 1 } rlDhcpRelayNextServerSecThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP requests are relayed only if their SEC field is greater or equal to the threshold value in order to allow local DHCP Servers to answer first." -- DEFVAL {0} ::= { rlDhcpRelayNextServerEntry 2 } rlDhcpRelayNextServerRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This variable displays the validity or invalidity of the entry. Setting it to 'destroy' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent." ::= { rlDhcpRelayNextServerEntry 3 } -- ======================================================= -- DHCP relay Interface Table - used for backward compatibility -- ======================================================= rlDhcpRelayInterfaceTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpRelayInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The enabled DHCP Relay Interface Table" ::= { rsDHCP 28 } rlDhcpRelayInterfaceEntry OBJECT-TYPE SYNTAX RlDhcpRelayInterfaceEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. The user can add entry when DHCP relay is enabled on Interface." INDEX { rlDhcpRelayInterfaceIfindex} ::= { rlDhcpRelayInterfaceTable 1 } RlDhcpRelayInterfaceEntry ::= SEQUENCE { rlDhcpRelayInterfaceIfindex INTEGER, rlDhcpRelayInterfaceUseGiaddr TruthValue, -- obsolete rlDhcpRelayInterfaceRowStatus RowStatus } rlDhcpRelayInterfaceIfindex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "The Interface on which an user enables a DHCP relay " ::= { rlDhcpRelayInterfaceEntry 1} rlDhcpRelayInterfaceUseGiaddr OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The flag is used to set a DHCP relay interface to use GiAddr in the standard way. Default is TRUE. The field is not supported." ::= { rlDhcpRelayInterfaceEntry 2 } rlDhcpRelayInterfaceRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Entry status. Can be destroy, active or createAndGo" ::= { rlDhcpRelayInterfaceEntry 3 } -- ======================================================= -- DHCP relay interface list Table -- ======================================================= rlDhcpRelayInterfaceListTable OBJECT-TYPE SYNTAX SEQUENCE OF RLDhcpRelayInterfaceListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains one entry. The entry contains port list and vlan lists of interfaces that have configured DHCP relay" ::= { rsDHCP 29} rlDhcpRelayInterfaceListEntry OBJECT-TYPE SYNTAX RLDhcpRelayInterfaceListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION " The entry contains port list and vlan lists of interfaces that have configured DHCP relay." INDEX { rlDhcpRelayInterfaceListIndex } ::= { rlDhcpRelayInterfaceListTable 1 } RLDhcpRelayInterfaceListEntry::= SEQUENCE { rlDhcpRelayInterfaceListIndex INTEGER, rlDhcpRelayInterfaceListPortList PortList, rlDhcpRelayInterfaceListVlanId1To1024 VlanList1, rlDhcpRelayInterfaceListVlanId1025To2048 VlanList2, rlDhcpRelayInterfaceListVlanId2049To3072 VlanList3, rlDhcpRelayInterfaceListVlanId3073To4094 VlanList4 } rlDhcpRelayInterfaceListIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Index in the table. Already 1." ::= { rlDhcpRelayInterfaceListEntry 1 } rlDhcpRelayInterfaceListPortList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "DHCP relay Interface Port List." ::= { rlDhcpRelayInterfaceListEntry 2 } rlDhcpRelayInterfaceListVlanId1To1024 OBJECT-TYPE SYNTAX VlanList1 MAX-ACCESS read-write STATUS current DESCRIPTION " DHCP relay Interface VlanId List 1." ::= { rlDhcpRelayInterfaceListEntry 3 } rlDhcpRelayInterfaceListVlanId1025To2048 OBJECT-TYPE SYNTAX VlanList2 MAX-ACCESS read-write STATUS current DESCRIPTION " DHCP relay Interface VlanId List 2." ::= { rlDhcpRelayInterfaceListEntry 4 } rlDhcpRelayInterfaceListVlanId2049To3072 OBJECT-TYPE SYNTAX VlanList3 MAX-ACCESS read-write STATUS current DESCRIPTION " DHCP relay Interface VlanId List 3." ::= { rlDhcpRelayInterfaceListEntry 5 } rlDhcpRelayInterfaceListVlanId3073To4094 OBJECT-TYPE SYNTAX VlanList4 MAX-ACCESS read-write STATUS current DESCRIPTION " DHCP relay Interface VlanId List 4." ::= { rlDhcpRelayInterfaceListEntry 6 } -- ======================================================= -- DHCP Server -- ======================================================= rlDhcpSrvEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable the use of the DHCP Server. For a router product the default value is TRUE. For a switch product the default is FALSE." DEFVAL { false } ::= { rsDHCP 30 } rlDhcpSrvExists OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows whether the device can function as a DHCP Server." ::= { rsDHCP 31 } rlDhcpSrvDbLocation OBJECT-TYPE SYNTAX INTEGER { nvram (1), flash (2) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Describes where DHCP Server database is stored." DEFVAL { flash } ::= { rsDHCP 32 } rlDhcpSrvMaxNumOfClients OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows maximum number of clients that can be supported by DHCP Server dynamic allocation." ::= { rsDHCP 33 } rlDhcpSrvDbNumOfActiveEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of active (valid) entries stored in database." ::= { rsDHCP 34 } rlDhcpSrvDbErase OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value is always false. Setting this variable to true causes erasing all entries in DHCP database." DEFVAL { false } ::= { rsDHCP 35 } rlDhcpSrvProbeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable the use of the DHCP probe before allocating an IP address." DEFVAL { false } ::= { rsDHCP 36 } rlDhcpSrvProbeTimeout OBJECT-TYPE SYNTAX Unsigned32 (300..10000) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the peiod of time in milliseconds the DHCP probe will wait before issuing a new trial or deciding that no other device on the network has the IP address which DHCP considers allocating." DEFVAL { 500 } ::= { rsDHCP 37 } rlDhcpSrvProbeRetries OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates how many times DHCP will probe before deciding that no other device on the network has the IP address which DHCP considers allocating." DEFVAL { 2 } ::= { rsDHCP 38 } rlDhcpSrvDefaultNetworkPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains a default network pool name. Used in case of one network pool only." ::= { rsDHCP 39 } -- IP Addresses Table rlDhcpSrvIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpSrvIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table of IP Addresses allocated by DHCP Server by static and dynamic allocations." ::= { rsDHCP 45} rlDhcpSrvIpAddrEntry OBJECT-TYPE SYNTAX RlDhcpSrvIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. Parameters of DHCP allocated IP Addresses table." INDEX { rlDhcpSrvIpAddrIpAddr } ::= { rlDhcpSrvIpAddrTable 1 } RlDhcpSrvIpAddrEntry ::= SEQUENCE { rlDhcpSrvIpAddrIpAddr IpAddress, rlDhcpSrvIpAddrIpNetMask IpAddress, rlDhcpSrvIpAddrIdentifier OCTET STRING, rlDhcpSrvIpAddrIdentifierType INTEGER, rlDhcpSrvIpAddrClnHostName SnmpAdminString, rlDhcpSrvIpAddrMechanism INTEGER, rlDhcpSrvIpAddrAgeTime Unsigned32, rlDhcpSrvIpAddrLeaseTime Unsigned32, rlDhcpSrvIpAddrState INTEGER, rlDhcpSrvIpAddrPoolName DisplayString, rlDhcpSrvIpAddrConfParamsName DisplayString, rlDhcpSrvIpAddrRowStatus RowStatus, rlDhcpSrvIpAddrOptionParamsName DisplayString } rlDhcpSrvIpAddrIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address that was allocated by DHCP Server." ::= { rlDhcpSrvIpAddrEntry 1 } rlDhcpSrvIpAddrIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { rlDhcpSrvIpAddrEntry 2 } rlDhcpSrvIpAddrIdentifier OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Unique Identifier for client. Either physical address or DHCP Client Identifier." ::= { rlDhcpSrvIpAddrEntry 3 } rlDhcpSrvIpAddrIdentifierType OBJECT-TYPE SYNTAX INTEGER { physAddr(1), clientId(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifier Type. Either physical address or DHCP Client Identifier." DEFVAL { clientId } ::= { rlDhcpSrvIpAddrEntry 4 } rlDhcpSrvIpAddrClnHostName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Client Host Name. DHCP Server will use it to update DNS Server. Must be unique per client." ::= { rlDhcpSrvIpAddrEntry 5 } rlDhcpSrvIpAddrMechanism OBJECT-TYPE SYNTAX INTEGER { manual(1), automatic(2), dynamic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mechanism of allocation IP Address by DHCP Server. The only value that can be set by user is manual." DEFVAL { manual } ::= { rlDhcpSrvIpAddrEntry 6 } rlDhcpSrvIpAddrAgeTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Age time of the IP Address." DEFVAL { 0 } ::= { rlDhcpSrvIpAddrEntry 7 } rlDhcpSrvIpAddrPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "Ip address pool name. A unique name for host pool static allocation, or network pool name in case of dynamic allocation." ::= { rlDhcpSrvIpAddrEntry 8 } rlDhcpSrvIpAddrConfParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table." ::= { rlDhcpSrvIpAddrEntry 9 } rlDhcpSrvIpAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rlDhcpSrvIpAddrEntry 10 } rlDhcpSrvIpAddrLeaseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Lease time of the IP Address. Get a value of network pool lease time at allocation time." DEFVAL { 86400 } ::= { rlDhcpSrvIpAddrEntry 11 } rlDhcpSrvIpAddrState OBJECT-TYPE SYNTAX INTEGER { pre-allocated(1), valid(2), expired(3), declined(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "State of allocation IP Address by DHCP Server." DEFVAL { valid } ::= { rlDhcpSrvIpAddrEntry 12 } rlDhcpSrvIpAddrOptionParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of DHCP Option Table." ::= { rlDhcpSrvIpAddrEntry 13 } -- Dynamic Table rlDhcpSrvDynamicTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpSrvDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DHCP Dynamic Server's configuration Table" ::= { rsDHCP 46 } rlDhcpSrvDynamicEntry OBJECT-TYPE SYNTAX RlDhcpSrvDynamicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. Parameters sent in as a DHCP Reply to DHCP Request with specified indices" INDEX { rlDhcpSrvDynamicPoolName } ::= { rlDhcpSrvDynamicTable 1 } RlDhcpSrvDynamicEntry ::= SEQUENCE { rlDhcpSrvDynamicPoolName DisplayString, rlDhcpSrvDynamicIpAddrFrom IpAddress, rlDhcpSrvDynamicIpAddrTo IpAddress, rlDhcpSrvDynamicIpNetMask IpAddress, rlDhcpSrvDynamicLeaseTime Unsigned32, rlDhcpSrvDynamicProbeEnable TruthValue, rlDhcpSrvDynamicTotalNumOfAddr Unsigned32, rlDhcpSrvDynamicFreeNumOfAddr Unsigned32, rlDhcpSrvDynamicConfParamsName DisplayString, rlDhcpSrvDynamicRowStatus RowStatus, rlDhcpSrvDynamicAvailableNumOfAddr Unsigned32, rlDhcpSrvDynamicNumOfPreallocatedAddr Unsigned32, rlDhcpSrvDynamicNumOfValidAddr Unsigned32, rlDhcpSrvDynamicNumOfExpiredAddr Unsigned32, rlDhcpSrvDynamicNumOfDeclinedAddr Unsigned32, rlDhcpSrvDynamicOptionParamsName DisplayString } rlDhcpSrvDynamicPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of DHCP dynamic addresses pool." ::= { rlDhcpSrvDynamicEntry 1 } rlDhcpSrvDynamicIpAddrFrom OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The first IP address allocated in this row." ::= { rlDhcpSrvDynamicEntry 2 } rlDhcpSrvDynamicIpAddrTo OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The last IP address allocated in this row." ::= { rlDhcpSrvDynamicEntry 3 } rlDhcpSrvDynamicIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The subnet mask associated with the IP addresses of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits set to 0." ::= { rlDhcpSrvDynamicEntry 4 } rlDhcpSrvDynamicLeaseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum lease-time in seconds granted to a requesting DHCP client. For automatic allocation use 0xFFFFFFFF. To exclude addresses from allocation mechanism, set this value to 0." DEFVAL { 86400 } ::= { rlDhcpSrvDynamicEntry 5 } rlDhcpSrvDynamicProbeEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Enable or Disable the use of the DHCP probe before allocating the address." DEFVAL { true } ::= { rlDhcpSrvDynamicEntry 6 } rlDhcpSrvDynamicTotalNumOfAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of addresses in space." ::= { rlDhcpSrvDynamicEntry 7 } rlDhcpSrvDynamicFreeNumOfAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Free number of addresses in space." ::= { rlDhcpSrvDynamicEntry 8 } rlDhcpSrvDynamicConfParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This variable points (serves as key) to appropriate set of parameters in the DHCP Server configuration parameters table." ::= { rlDhcpSrvDynamicEntry 9 } rlDhcpSrvDynamicRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rlDhcpSrvDynamicEntry 10 } rlDhcpSrvDynamicAvailableNumOfAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of available addresses in space - all range minus excluded." ::= { rlDhcpSrvDynamicEntry 11 } rlDhcpSrvDynamicNumOfPreallocatedAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of preallocated addresses in space." ::= { rlDhcpSrvDynamicEntry 12 } rlDhcpSrvDynamicNumOfValidAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Valid (allocated) addresses in space." ::= { rlDhcpSrvDynamicEntry 13 } rlDhcpSrvDynamicNumOfExpiredAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of expired addresses in space." ::= { rlDhcpSrvDynamicEntry 14 } rlDhcpSrvDynamicNumOfDeclinedAddr OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of declined addresses in space." ::= { rlDhcpSrvDynamicEntry 15 } rlDhcpSrvDynamicOptionParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The name of DHCP Option Table." ::= { rlDhcpSrvDynamicEntry 16 } -- Configuration Parameters Table rlDhcpSrvConfParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpSrvConfParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DHCP Configuration Parameters Table" ::= { rsDHCP 47 } rlDhcpSrvConfParamsEntry OBJECT-TYPE SYNTAX RlDhcpSrvConfParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. Each entry corresponds to one specific parameters set." INDEX { rlDhcpSrvConfParamsName } ::= { rlDhcpSrvConfParamsTable 1 } RlDhcpSrvConfParamsEntry ::= SEQUENCE { rlDhcpSrvConfParamsName DisplayString, rlDhcpSrvConfParamsNextServerIp IpAddress, rlDhcpSrvConfParamsNextServerName DisplayString, rlDhcpSrvConfParamsBootfileName DisplayString, rlDhcpSrvConfParamsRoutersList DisplayString, rlDhcpSrvConfParamsTimeSrvList DisplayString, rlDhcpSrvConfParamsDnsList DisplayString, rlDhcpSrvConfParamsDomainName SnmpAdminString, rlDhcpSrvConfParamsNetbiosNameList DisplayString, rlDhcpSrvConfParamsNetbiosNodeType INTEGER, rlDhcpSrvConfParamsCommunity DisplayString, rlDhcpSrvConfParamsNmsIp IpAddress, rlDhcpSrvConfParamsOptionsList DisplayString, rlDhcpSrvConfParamsRowStatus RowStatus } rlDhcpSrvConfParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value is a unique index for the entry in the rlDhcpSrvConfParamsTable." ::= { rlDhcpSrvConfParamsEntry 1 } rlDhcpSrvConfParamsNextServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP of next server for client to use in configuration process." -- DEFVAL { 0.0.0.0 } ::= { rlDhcpSrvConfParamsEntry 2 } rlDhcpSrvConfParamsNextServerName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The mame of next server for client to use in configuration process." ::= { rlDhcpSrvConfParamsEntry 3 } rlDhcpSrvConfParamsBootfileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of file for client to request from next server." ::= { rlDhcpSrvConfParamsEntry 4 } rlDhcpSrvConfParamsRoutersList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The value of option code 3, which defines default routers list. Each IP address is represented in dotted decimal notation format with ';' between them." ::= { rlDhcpSrvConfParamsEntry 5 } rlDhcpSrvConfParamsTimeSrvList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The value of option code 4, which defines time servers list. Each IP address is represented in dotted decimal notation format with ';' between them." ::= { rlDhcpSrvConfParamsEntry 6 } rlDhcpSrvConfParamsDnsList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The value of option code 6, which defines the list of DNSs. Each IP address is represented in dotted decimal notation format with ';' between them." ::= { rlDhcpSrvConfParamsEntry 7 } rlDhcpSrvConfParamsDomainName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value option code 15, which defines the domain name.." ::= { rlDhcpSrvConfParamsEntry 8 } rlDhcpSrvConfParamsNetbiosNameList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The value option code 44, which defines the list of NETBios Name Servers. Each IP address is represented in dotted decimal notation format with ';' between them." ::= { rlDhcpSrvConfParamsEntry 9 } rlDhcpSrvConfParamsNetbiosNodeType OBJECT-TYPE SYNTAX INTEGER { b-node(1), p-node(2), m-node(4), h-node(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value option code 46, which defines the NETBios node type. The option will be added only if rlDhcpSrvConfParamsNetbiosNameList is not empty." DEFVAL { h-node } ::= { rlDhcpSrvConfParamsEntry 10 } rlDhcpSrvConfParamsCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of site-specific option 128, which defines Community. The option will be added only if rlDhcpSrvConfParamsNmsIp is set." DEFVAL { "public" } ::= { rlDhcpSrvConfParamsEntry 11 } rlDhcpSrvConfParamsNmsIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of site-specific option 129, which defines IP of Network Manager." -- DEFVAL { 0.0.0.0 } ::= { rlDhcpSrvConfParamsEntry 12 } rlDhcpSrvConfParamsOptionsList OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The sequence of option segments. Each option segment is represented by a triplet . The code defines the code of each supported option. The length defines the length of each supported option. The value defines the value of the supported option. If there is a number of elements in the value field, they are divided by ','. Each element of type IP address in value field is represented in dotted decimal notation format." ::= { rlDhcpSrvConfParamsEntry 13 } rlDhcpSrvConfParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rlDhcpSrvConfParamsEntry 14 } rlDhcpSrvNumOfNetworkPools OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of network pools (not excluded)." ::= { rsDHCP 48 } rlDhcpSrvNumOfExcludedPools OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of excluded pools." ::= { rsDHCP 49 } rlDhcpSrvNumOfHostPools OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of static entries stored in database." ::= { rsDHCP 50 } rlDhcpSrvNumOfDynamicEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of dynamic and automatic (not static) entries stored in database." ::= { rsDHCP 51 } rlDhcpSrvNumOfUsedEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of entries (any type) stored in database." ::= { rsDHCP 52 } rlDhcpSrvNumOfPreAllocatedEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of preallocated entries." ::= { rsDHCP 53 } rlDhcpSrvNumOfExpiredEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of expired entries." ::= { rsDHCP 54 } rlDhcpSrvNumOfDeclinedEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of declined entries." ::= { rsDHCP 55 } rlDhcpSrvNumOfAutomaticEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This variable shows number of automatic entries." ::= { rsDHCP 56 } -- Option Parameters Table RlDhcpSrvOptionTypeEnum ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Ip Dhcp server option type enumeration." SYNTAX INTEGER { boolean(1), integer(2), ascii(3), ip(4), hex(5), ip-list(6) } rlDhcpSrvOptionParamsTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpSrvOptionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DHCP Option Parameters Table" ::= { rsDHCP 57 } rlDhcpSrvOptionParamsEntry OBJECT-TYPE SYNTAX RlDhcpSrvOptionParamsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. Each entry corresponds to one specific parameters set." INDEX { rlDhcpSrvOptionParamsName, rlDhcpSrvOptionParamsCode } ::= { rlDhcpSrvOptionParamsTable 1 } RlDhcpSrvOptionParamsEntry ::= SEQUENCE { rlDhcpSrvOptionParamsName DisplayString, rlDhcpSrvOptionParamsCode Unsigned32, rlDhcpSrvOptionParamsType RlDhcpSrvOptionTypeEnum, rlDhcpSrvOptionParamsOrigString DisplayString, rlDhcpSrvOptionParamsDescription DisplayString, rlDhcpSrvOptionParamsRowStatus RowStatus } rlDhcpSrvOptionParamsName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This value is a unique index for the entry in the rlDhcpSrvOptionParamsTable." ::= { rlDhcpSrvOptionParamsEntry 1 } rlDhcpSrvOptionParamsCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-write STATUS current DESCRIPTION "The option code." ::= { rlDhcpSrvOptionParamsEntry 2 } rlDhcpSrvOptionParamsType OBJECT-TYPE SYNTAX RlDhcpSrvOptionTypeEnum MAX-ACCESS read-write STATUS current DESCRIPTION "The option type." ::= { rlDhcpSrvOptionParamsEntry 3 } rlDhcpSrvOptionParamsOrigString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The option value." ::= { rlDhcpSrvOptionParamsEntry 4 } rlDhcpSrvOptionParamsDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "The option description." ::= { rlDhcpSrvOptionParamsEntry 5 } rlDhcpSrvOptionParamsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { rlDhcpSrvOptionParamsEntry 6 } -- Auxulary Option Table rlDhcpSrvAuxOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF RlDhcpSrvAuxOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The DHCP Auxulary Option Table" ::= { rsDHCP 58 } rlDhcpSrvAuxOptionEntry OBJECT-TYPE SYNTAX RlDhcpSrvAuxOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row definition for this table. Each entry contains pair option code/option type that permitted by option command." INDEX { rlDhcpSrvAuxOptionCode, rlDhcpSrvAuxOptionType } ::= { rlDhcpSrvAuxOptionTable 1 } RlDhcpSrvAuxOptionEntry ::= SEQUENCE { rlDhcpSrvAuxOptionCode Unsigned32, rlDhcpSrvAuxOptionType RlDhcpSrvOptionTypeEnum, rlDhcpSrvAuxOptionMinVal Unsigned32, rlDhcpSrvAuxOptionMaxVal Unsigned32 } rlDhcpSrvAuxOptionCode OBJECT-TYPE SYNTAX Unsigned32 (1..254) MAX-ACCESS read-only STATUS current DESCRIPTION "The option Code." ::= { rlDhcpSrvAuxOptionEntry 1 } rlDhcpSrvAuxOptionType OBJECT-TYPE SYNTAX RlDhcpSrvOptionTypeEnum MAX-ACCESS read-only STATUS current DESCRIPTION "The option enumeration." ::= { rlDhcpSrvAuxOptionEntry 2 } rlDhcpSrvAuxOptionMinVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The minimal value of this option Code." ::= { rlDhcpSrvAuxOptionEntry 3 } rlDhcpSrvAuxOptionMaxVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximal value of this option Code." ::= { rlDhcpSrvAuxOptionEntry 4 } END