-- ***************************************************************** -- CISCO-WAN-OPTIMIZATION-MIB.my : A MIB for WAN Optimization -- Features -- -- October 2010, Chetan K Patel, Pooja Subramanya. -- -- Copyright (c) 2010-2016 by cisco Systems Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-WAN-OPTIMIZATION-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, NOTIFICATION-TYPE, Counter64, Unsigned32, Gauge32, Integer32 FROM SNMPv2-SMI MODULE-COMPLIANCE, NOTIFICATION-GROUP, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, TruthValue, TimeInterval, DateAndTime, TimeStamp FROM SNMPv2-TC CounterBasedGauge64 FROM HCNUM-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB CiscoMilliSeconds, TimeIntervalSec, Unsigned64 FROM CISCO-TC cpmCPUTotalMonIntervalValue FROM CISCO-PROCESS-MIB ciscoMgmt FROM CISCO-SMI; ciscoWanOptimizationMIB MODULE-IDENTITY LAST-UPDATED "201605220000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-waas@cisco.com, cs-waas-express@cisco.com" DESCRIPTION "This MIB is for managing Wide Area Network (WAN) Optimization systems. The objective of WAN optimization system is to reduce as much traffic as possible on WAN link and improve the application response time for various applications, which gets affected due to bandwidth, packet loss, congestion and latency limitations of WAN link. WAN optimization system is generally peer based system. They are located at both end of WAN link and peer with each other to perform optimization. This MIB provides instrumentation for monitoring statistics for various features implemented for WAN optimization. WAN optimization features includes TCP protocol optimizations and various Application Optimizers (AOs). AOs include SMB AO, HTTP AO, CIFS AO, NFS AO, MAPI AO, VIDEO AO, SSL AO and EPM AO. Acronyms and Terminology used in this MIB are: AO : Application Optimizer TFO : Traffic Flow Optimization SMB : Server Message Block CIFS : Common Internet File System HTTP : Hyper Text Transfer Protocol NFS : Network File System SSL : Secure Socket Layer MAPI : Messaging Application Programming Interface EPM : End Point Mapper RA : Read Ahead MD : Meta Data PT : Pass Through AD : Auto Discovery RTT : Round Trip Time Conn : Connections File Server : SMB/CIFS file server peer : It refers to peer WAN optimization system located on other end of WAN and registered with this device to optimize the traffic. SharePoint : SharePoint is a Microsoft Application that provides a collaborative environment for using Microsoft Office and related applications. Typical deployments of Microsoft SharePoint use one or more SharePoint servers in a server farm for scalability. The actual data for the various documents, etc. are usually stored in a backend database. The SharePoint server(s) communicate with the backend database using SharePoint Back-end protocols. Clients (either Microsoft Office Applications like Word, Excel, PowerPoint or Web Browsers) typically connect to the SharePoint server and communicate using SOAP over HTTP. Fast Connections : End to end connections which uses existing TCP connection over WAN and reconstructs only LAN connection is fast connection. DRE : Data Redundancy Elimination. LZ : Lemple-Ziv data compression. PLZ : Persistent Lemple-Ziv data compression." REVISION "201605220000Z" DESCRIPTION "Edited descriptions of CwoDreCacheStatus object. Changed Max-Access of cwoDrePerfStatsEncodeCompressionRatio and cwoDrePerfStatsDecodeCompressionRatio objects." REVISION "201605180000Z" DESCRIPTION "Added cwoAoHttpxStatsAKC table for HTTP Akamai Cache objects. Added cwoAoDre table for DRE objects." REVISION "201511300000Z" DESCRIPTION "Deprecated cwoAoVideoxStats and cwoAoCifsxStats tables as all the objects in them are deprecated." REVISION "201305230000Z" DESCRIPTION "Added the below counters in cwoAoSmbxStats table Signed SMB Bytes Stats enhancement feature cwoAoSmbxStatsRdL4SignWANBytes cwoAoSmbxStatsWrL4SignWANBytes cwoAoSmbxStatsRdSignLANBytes cwoAoSmbxStatsWrSignLANBytes" REVISION "201212130000Z" DESCRIPTION "Added the below new counters which display SharePoint AO statistics in cwoAoHttpxStats group. cwoAoHttpxStatsTotalSPSessions cwoAoHttpxStatsTotalSPPFSessions cwoAoHttpxStatsTotalSPPFObjects cwoAoHttpxStatsTotalSPRTTSaved cwoAoHttpxStatsTotalSPPFMissTime Added the below new counters in cwoAoCifsxStats group to support the CIFS Atkins feature. cwoAoCifsxStatsFFTotalReqs cwoAoCifsxStatsFFRemoteReqs cwoAoCifsxStatsFFLocalRespTime cwoAoCifsxStatsFFRemoteRespTime cwoAoCifsxStatsDirResources" REVISION "201203050000Z" DESCRIPTION "(1) Added cwoAoStatsLoadStatus and cwoAoStatsBwOpt in cwoAoStatsTable (2) Added cwoAoSmbStatsBwOpt in cwoAoSmbxstats Group (3) Added cwoAoHttpxStats - Statistics Group for HTTP AO (4) Added cwoAoMapixStats - Statistics Group for MAPI AO (5) Added cwoAoNfsxStats - Statistics Group for NFS AO (6) Added cwoAoVideoxStats - Statistics Group for Video AO (7) Added cwoAoCifsxstats - Statistics Group for CIFS AO (8) Added cwoApp - Gorup which includes objects for Applications associated with AOs. (9) Added cwoPmap - Group which includes objects for policy-map. (10) Added cwoCmap - Group which includes objects for class-maps associated with active policy-map. (11) Addes cwoTfoStatsLoadStatus in cswTfoStats group" REVISION "201104190000Z" DESCRIPTION "New License Notification Group has been added." REVISION "201010260000Z" DESCRIPTION "Initial version of this MIB." ::= { ciscoMgmt 762 } CwoHttpAKCPrepStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents various Akamai cache preposition task status of a HTTP application optimizer. unknown(1) : The prepositioning task is in unknown state. scheduled(2) : The prepositioning task is scheduled to run. disabled(3) : The prepositioning task is disabled. success(4) : The prepositioning task completed successfully. error(5) : The prepositioning task has an error." SYNTAX INTEGER { unknown(1), scheduled(2), disabled(3), success(4), error(5) } CwoDreCacheStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents various DRE cache status of an application optimizer. notUsable(1) : This state indicates that DRE cache is currently not usable/accessible (eg.,when DRE partition is not mounted/available). initializing(2) : This state indicates that DRE cache is getting initialized. usable(3) : This state indicates that DRE cache is accessible and in usable condition. tempFailed(4) : This state indicates that DRE cache is temporarily not available due to internal errors. failed(5) : This state indicates that DRE cache initialization failed." SYNTAX INTEGER { notUsable(1), initializing(2), usable(3), temporarilyFailed(4), failed(5) } CwoAoName ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents the name of an Application Optimizer supported by this system." SYNTAX OCTET STRING (SIZE (1..96)) CwoAoOperationalState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents Various operational states of an Application Optimizer. shutdown : This state indicates that an AO is in shutdown state. initializing : This state indicates that an AO is getting Initialized. normalRunning : This state indicates that an AO is running normally. normalDisabled : This state indicates that an AO is in normal disabled. licenseExpired : This state indicates that license for an AO is expired. cleaningup : This state indicates that an AO is in cleaning up state. error : This state indicates that some error has happened in AO operation." SYNTAX INTEGER { shutdown(1), initializing(2), normalRunning(3), normalDisabled(4), licenseExpired(5), cleaningup(6), error(7) } CwoLoadStates ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents load status of the system or feature. unknown : This state is applicable when feature is not active or disabled. green : This state indicates that the feature is operating normally, within acceptable load limits. yellow : This state indicates that the feature is overloaded, and new connections received by it may not get optimized. red : This state indicates that the feature is not healthy, and existing as well as new connections received by it may not get optimized." SYNTAX INTEGER { unknown(1), green(2), yellow(3), red(4) } CwoTypes ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Represents various types related to wan optimization system. One such use is types of class-map and policy-map for wan optimization syatem. waas : It is used for wan optimization functionality. appnav : It is used for application traffic redirection to wan optimization systems." SYNTAX INTEGER { waas(1), appnav(2) } -- Textual Conventions definition will be defined before this line ciscoWanOptimizationMIBNotifs OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIB 0 } ciscoWanOptimizationMIBObjects OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIB 1 } -- Conformance Information ciscoWanOptimizationMIBConform OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIB 3 } ciscoWanOptimizationMIBCompliances OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBConform 1 } -- General WAN Optimization Group. It contains general statistics -- related to WAN Optimization system. cwoGeneral OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 1 } -- Traffic Flow Optimization Group. cwoTfo OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 2 } -- Statistics for AOs. cwoAo OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 3 } -- Application Group cwoApp OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 4 } -- Policy map Group cwoPmap OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 5 } -- Class map Group cwoCmap OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 6 } cwoDre OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBObjects 7 } cwoGeneralActivePeers OBJECT-TYPE SYNTAX Gauge32 UNITS "number of peers" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of active peers connected with this device for WAN optimization." ::= { cwoGeneral 1 } cwoGeneralMaxActivePeers OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains maximum number of peers that this device can peer with for WAN optimization." ::= { cwoGeneral 2 } cwoGeneralCpuThrottleHigh OBJECT-TYPE SYNTAX Unsigned32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains high threshold (percentage) value of CPU usage of system when WAN optimization feature is running. The current CPU utilization, stored in cpmCPUTotalMonIntervalValue, is compared against this value. A cwoCpuThrottlingOn notification is generated whenever cpmCPUTotalMonIntervalValue exceeds cwoGeneralCpuThrottleHigh for cwoGeneralCpuThrottlPeriod." ::= { cwoGeneral 3 } cwoGeneralCpuThrottleLow OBJECT-TYPE SYNTAX Unsigned32 (1..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "This object contains low threshold (percentage) value of CPU usage of system when WAN optimization feature is running. The current CPU utilization, stored in cpmCPUTotalMonIntervalValue, is compared against this value. A cwoCpuThrottlingOff notification is generated if a prior cwoCpuThrottlingOn notification was generated, and the current value of cpmCPUTotalMonIntervalValue is below cwoGeneralCpuThrottleLow for cwoGeneralCpuThrottlPeriod. Note that the value of cwoGeneralCpuThrottleLow must be less than or equal to cwoGeneralCpuThrottleHigh." ::= { cwoGeneral 4 } cwoGeneralCpuThrottlPeriod OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-write STATUS current DESCRIPTION "This Object indicates CPU throttling observation period. The value of the CPU utilization for this period is stored in cpmCPUTotalMonIntervalValue. If the value of cpmCPUTotalMonIntervalValue object is above cwoGeneralCPUThrottleHigh, a cwoCPUThrottlingOn notification is sent. If it is below cwoGeneralCPUThrottleLow, a cwoCPUThrottlingOff notification is sent to the NMS." ::= { cwoGeneral 5 } -- Statistics of TFO cwoTfoStats OBJECT IDENTIFIER ::= { cwoTfo 1 } cwoTfoStatsTotalOptConn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of TCP connections optimized since TFO was started or its statistics were last reset." ::= { cwoTfoStats 1 } cwoTfoStatsActiveOptConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of currently active TCP connections getting optimized." ::= { cwoTfoStats 2 } cwoTfoStatsMaxActiveConn OBJECT-TYPE SYNTAX Unsigned64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains maximum number of active TCP connections that this device can optimize." ::= { cwoTfoStats 3 } cwoTfoStatsActiveOptTCPPlusConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of active TCP connections going through TCP plus other optimization." ::= { cwoTfoStats 4 } cwoTfoStatsActiveOptTCPOnlyConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of active connections going through only TCP optimization." ::= { cwoTfoStats 5 } cwoTfoStatsActiveOptTCPPrepConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of current active TCP connections that were originated by an accelerator to acquire data in anticipation of its future use." ::= { cwoTfoStats 6 } cwoTfoStatsActiveADConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of current active TCP connections in the auto-discovery state." ::= { cwoTfoStats 7 } cwoTfoStatsReservedConn OBJECT-TYPE SYNTAX Unsigned64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of TCP connections reserved for the MAPI accelerator." ::= { cwoTfoStats 8 } cwoTfoStatsPendingConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of TCP connections, which are pending in queue of connections to be optimized." ::= { cwoTfoStats 9 } cwoTfoStatsActivePTConn OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of active Pass Through TCP connections. Connections which are not selected for optimization are called Pass Through." ::= { cwoTfoStats 10 } cwoDreCacheStats OBJECT IDENTIFIER ::= { cwoDre 1 } cwoDrePerfStats OBJECT IDENTIFIER ::= { cwoDre 2 } cwoDreCacheStatsStatus OBJECT-TYPE SYNTAX CwoDreCacheStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the status of the portion of the disk that is meant for DRE cache." ::= { cwoDreCacheStats 1 } cwoDreCacheStatsAge OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the age of the oldest data present in the DRE cache. For example, let us say that the portion of the disk space allocated for DRE cache is 1GB and it is full. Now, if new data is written onto this cache, then it would replace the oldest data in the cache in First-In-First-Out (FIFO) order. This object will specify what is the oldest data now present in the cache. It takes the format of dhm, where 'x' is an integer number. For example, 6d20h30m means that the oldest data's age is 6 days, 20 hours and 30 minutes." ::= { cwoDreCacheStats 2 } cwoDreCacheStatsTotal OBJECT-TYPE SYNTAX Unsigned32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of available disk space for DRE cache. For example, if the total disk space is 202 GB and let us say that 20% of this disk space is allocated for DRE cache, then this would mean that 40GB (40960 MB) out of the total disk space is allocated for DRE cache." ::= { cwoDreCacheStats 3 } cwoDreCacheStatsUsed OBJECT-TYPE SYNTAX Gauge32 UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of DRE disk space currently used out of the total space allocated for DRE cache. For example, if the disk space allocated for DRE cache is 972798MB and if this object indicates 1%, it means that 9727 MB is used and remaining approximate 963071 MB of disk space is free." ::= { cwoDreCacheStats 4 } cwoDreCacheStatsDataUnitUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates DRE disk space currently used by data unit. DRE stores the actual data as data units in data block and the metadata (chuck signature) in signature block." ::= { cwoDreCacheStats 5 } cwoDreCacheStatsReplacedOneHrDataUnit OBJECT-TYPE SYNTAX Unsigned32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of data unit replaced in the last one hour in DRE cache. DRE stores the actual data as data units in the cache data block. If new data units have to be stored in the cache, the older data units in the cache are evicted in First-In-First-Out (FIFO) order. This object would also indicate how much new data units have been stored in the DRE cache in the past one hour." ::= { cwoDreCacheStats 6 } cwoDreCacheStatsDataUnitAge OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the age of oldest data unit in the data block. DRE stores the actual data as data units in the data block and the metadata (chuck signature) in signature block. If new data unit should be written to the data block when it is full, then the oldest data unit currently present in the data block will be evicted. So this object would indicate the age of the oldest data unit present in the DRE cache. It takes the format of dhm, where 'x' is an integer number. For example, 6d20h30m means that the oldest data's age is 6 days, 20 hours and 30 minutes." ::= { cwoDreCacheStats 7 } cwoDreCacheStatsSigblockUsage OBJECT-TYPE SYNTAX Unsigned32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates DRE disk space currently used by sigblock or signature block. DRE stores the actual data as data units in cache data block and the metadata (chuck signature) in signature block." ::= { cwoDreCacheStats 8 } cwoDreCacheStatsReplacedOneHrSigblock OBJECT-TYPE SYNTAX Unsigned32 UNITS "MB" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the amount of signatures replaced in last one hour in sigblock. DRE stores the metadata (chuck signature) in signature block of DRE cache. If new signatures have to be stored in the cache, the older signatures in the sigblock are evicted in First-In-First-Out (FIFO) order. This object would also indicate how much new signatures have been stored in the DRE cache sigblock in the past one hour." ::= { cwoDreCacheStats 9 } cwoDreCacheStatsSigblockAge OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the age of oldest signature in the sigblock. DRE stores the actual data as data units in the data block and the metadata (chuck signature) in signature block. If a new signature should be written to the sigblock when it is full, then the oldest signature currently present in the sigblock will be evicted. So this object would indicate the age of the oldest signature present in the DRE cache. It takes the format of dhm, where 'x' is an integer number. For example, 6d20h30m means that the oldest data's age is 6 days, 20 hours and 30 minutes." ::= { cwoDreCacheStats 10 } cwoDrePerfStatsEncodeCompressionRatio OBJECT-TYPE SYNTAX Gauge32 (1..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total compression ratio provided by all the DRE components - DRE, LZ and PLZ (if applicable), during the encoding process. It is the ratio of the number of bytes entering the DRE module (from LAN side) and the number of bytes exiting the DRE module (from WAN side). This object indicates the value that is calculated since the last time the counter was cleared. The calculation is not based on per-connection or per-peer basis." ::= { cwoDrePerfStats 1 } cwoDrePerfStatsEncodeCompressionLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the processing latency that is introduced by DRE/LZ/PLZ processes during the encoding of data that is coming into the DRE module. The encoding process comprises of dividing the input data into chunks and calculating the signature of every chunk. This encoding process would add certain latency. Then the LZ compression would add further latency. This object indicates the value that is calculated since the last time the counter was cleared. The calculation is not based on per-connection or per-peer basis." ::= { cwoDrePerfStats 2 } cwoDrePerfStatsEncodeAvgMsgSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average size of all the messages handled by DRE during encoding (i.e., for all the messages received from the LAN side). The message size is an important factor in performance of DRE. This object indicates the value that is calculated since the last time the counter was cleared. The calculation is not based on per-connection or per-peer basis." ::= { cwoDrePerfStats 3 } cwoDrePerfStatsDecodeCompressionRatio OBJECT-TYPE SYNTAX Gauge32 (1..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total compression ratio provided by all the DRE components - DRE, LZ and PLZ (if applicable), during the decoding process. It is the ratio of the number of bytes entering the DRE module (from WAN side) and the number of bytes exiting the DRE module (from LAN side). This object indicates the value that is calculated since the last time the counter was cleared. The calculation is not based on per-connection or per-peer basis." ::= { cwoDrePerfStats 4 } cwoDrePerfStatsDecodeCompressionLatency OBJECT-TYPE SYNTAX Unsigned32 UNITS "ms" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the processing latency that is introduced by DRE/LZ/PLZ processes during the decoding of data that is coming into the DRE module. The LZ decompression (for applicable data) would add certain latency. Then the decoding process that involves a lot of signature look-up for disk IO and data fetch from the data unit for recreation of original data, would add further latency. This object indicates the value that is calculated since the last time the counter was cleared. The calculation is not based on per-connection or per-peer basis." ::= { cwoDrePerfStats 5 } cwoDrePerfStatsDecodeAvgMsgSize OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average size of all the messages handled by DRE during decoding (i.e., for all the messages received from the WAN side). The message size is an important factor in performance of DRE. This object indicates the value that is calculated since the last time the counter was cleared. The calculation is not based on per-connection or per-peer basis." ::= { cwoDrePerfStats 6 } cwoTfoStatsTotalNormalClosedConn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of optimized TCP connections which were closed normally since TFO was started or its statistics were last reset." ::= { cwoTfoStats 11 } cwoTfoStatsResetConn OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of optimized TCP connections, which are reset since TFO was started or its statistics were last reset." ::= { cwoTfoStats 12 } cwoTfoStatsLoadStatus OBJECT-TYPE SYNTAX CwoLoadStates MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the load status of Traffic Flow Optimizer (TFO)." ::= { cwoTfoStats 13 } -- Statistics table of AO cwoAoStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CwoAoStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives statistics of Application Optimizers." ::= { cwoAo 1 } cwoAoStatsEntry OBJECT-TYPE SYNTAX CwoAoStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing statistics for particular Application optimizer. An entry will be created during system startup and will include AOs, which are supported by this system." INDEX { cwoAoStatsName } ::= { cwoAoStatsTable 1 } CwoAoStatsEntry ::= SEQUENCE { cwoAoStatsName CwoAoName, cwoAoStatsIsConfigured TruthValue, cwoAoStatsIsLicensed TruthValue, cwoAoStatsOperationalState CwoAoOperationalState, cwoAoStatsStartUpTime DateAndTime, cwoAoStatsLastResetTime DateAndTime, cwoAoStatsTotalHandledConns Counter32, cwoAoStatsTotalOptConns Counter32, cwoAoStatsTotalHandedOffConns Counter32, cwoAoStatsTotalDroppedConns Counter32, cwoAoStatsActiveOptConns Gauge32, cwoAoStatsPendingConns Gauge32, cwoAoStatsMaxActiveOptConns Unsigned32, cwoAoStatsLoadStatus CwoLoadStates, cwoAoStatsBwOpt Gauge32 } cwoAoStatsName OBJECT-TYPE SYNTAX CwoAoName MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents name of the AO." ::= { cwoAoStatsEntry 1 } cwoAoStatsIsConfigured OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether the AO is configured or not. If AO is not configured then the operational state (cwoAoStatsOperationalState) of AO would be 'shutdown'." ::= { cwoAoStatsEntry 2 } cwoAoStatsIsLicensed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates whether license for the AO is valid or not. If License for AO is not valid then operational state (cwoAoStatsOperationalState) of AO would be 'shutdown'." ::= { cwoAoStatsEntry 3 } cwoAoStatsOperationalState OBJECT-TYPE SYNTAX CwoAoOperationalState MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates operational state of the AO. If AO is not configured or license is not valid for this AO then operational state of AO would be 'shutdown'." ::= { cwoAoStatsEntry 4 } cwoAoStatsStartUpTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains date and time when AO was started. This object will hold NULL value when AO is in shutdown state." ::= { cwoAoStatsEntry 5 } cwoAoStatsLastResetTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains date and time when statistics of AO were set to reset last time. When statistics of AO set to reset then all statistics counters will also set to reset. This object will hold NULL value when AO is in shutdown state." ::= { cwoAoStatsEntry 6 } cwoAoStatsTotalHandledConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of connections handled by AO since it was started or its statistics were last reset." ::= { cwoAoStatsEntry 7 } cwoAoStatsTotalOptConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of connections optimized by AO since it was started or its statistics were last reset." ::= { cwoAoStatsEntry 8 } cwoAoStatsTotalHandedOffConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of connections handed off to Generic optimization by AO since it was started or its statistics last reset." ::= { cwoAoStatsEntry 9 } cwoAoStatsTotalDroppedConns OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of connections dropped by AO since it was started or its statistics were last reset." ::= { cwoAoStatsEntry 10 } cwoAoStatsActiveOptConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of active connections which are getting optimized by AO." ::= { cwoAoStatsEntry 11 } cwoAoStatsPendingConns OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of connections currently pending in queue of connections to be optimized by AO." ::= { cwoAoStatsEntry 12 } cwoAoStatsMaxActiveOptConns OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains maximum number of active TCP connections that AO can optimize." ::= { cwoAoStatsEntry 13 } cwoAoStatsLoadStatus OBJECT-TYPE SYNTAX CwoLoadStates MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the load status of an AO." ::= { cwoAoStatsEntry 14 } cwoAoStatsBwOpt OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage bandwidth optimization achieved due to optimizations done by an AO." ::= { cwoAoStatsEntry 15 } -- Extended statistics for SMB AO cwoAoSmbxStats OBJECT IDENTIFIER ::= { cwoAo 2 } cwoAoSmbxStatsBytesReadCache OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of bytes read from SMB Application Optimizer cache (Read-ahead and Metadata cache) since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 1 } cwoAoSmbxStatsBytesWriteCache OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of bytes written to SMB Application Optimizer cache (Read-ahead and Metadata) since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 2 } cwoAoSmbxStatsBytesReadServer OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of bytes read from file servers by SMB Application Optimizer since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 3 } cwoAoSmbxStatsBytesWriteServer OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of bytes written to file servers by SMB Application Optimizer since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 4 } cwoAoSmbxStatsBytesReadClient OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of bytes read by SMB Application Optimizer clients since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 5 } cwoAoSmbxStatsBytesWriteClient OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of bytes written by SMB Application optimizer clients since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 6 } cwoAoSmbxStatsProcessedReqs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of requests processed by SMB Application Optimizer since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 7 } cwoAoSmbxStatsActiveReqs OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of active requests getting processed by SMB Application Optimizer." ::= { cwoAoSmbxStats 8 } cwoAoSmbxStatsTotalTimedOutReqs OBJECT-TYPE SYNTAX Unsigned64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of requests timed out in SMB Application Optimizer since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 9 } cwoAoSmbxStatsTotalRemoteReqs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of SMB requests sent to remote file server since SMB AO was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 10 } cwoAoSmbxStatsTotalLocalReqs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of SMB requests served locally by SMB Application Optimizer since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 11 } cwoAoSmbxStatsRemoteAvgTime OBJECT-TYPE SYNTAX CiscoMilliSeconds MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains average duration of time taken by SMB Application Optimizer to process all remote requests since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 12 } cwoAoSmbxStatsLocalAvgTime OBJECT-TYPE SYNTAX CiscoMilliSeconds MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains average duration of time taken by SMB Application Optimizer to process all local requests since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 13 } cwoAoSmbxStatsRACacheHitCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains SMB Application Optimizer Read Ahead Cache hit count since SMB AO was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 14 } cwoAoSmbxStatsMDCacheHitCount OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains SMB Application Optimizer Metadata cache hit count since SMB AO was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 15 } cwoAoSmbxStatsRACacheHitRate OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains SMB Application Optimizer Read Ahead cache hit rate since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 16 } cwoAoSmbxStatsMDCacheHitRate OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains SMB Application Optimizer Metadata cache hit rate since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 17 } cwoAoSmbxStatsMaxRACacheSize OBJECT-TYPE SYNTAX Unsigned64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains Maximum disk space that can be allocated for Read Ahead data in SMB Application Optimizer cache." ::= { cwoAoSmbxStats 18 } cwoAoSmbxStatsMaxMDCacheSize OBJECT-TYPE SYNTAX Unsigned64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains maximum disk space that can be allocated for Metadata in SMB Application Optimizer cache." ::= { cwoAoSmbxStats 19 } cwoAoSmbxStatsMDCacheSize OBJECT-TYPE SYNTAX CounterBasedGauge64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains current size of Metadata cache in SMB Application Optimizer." ::= { cwoAoSmbxStats 20 } cwoAoSmbxStatsRAEvictedAge OBJECT-TYPE SYNTAX CiscoMilliSeconds MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains amount of time spent in the SMB Application Optimizer Read Ahead cache by the resource that was last evicted since last update. If this amount is too short or too long, it is recommended to modify the size of the cache." ::= { cwoAoSmbxStats 21 } cwoAoSmbxStatsRTT OBJECT-TYPE SYNTAX TimeIntervalSec MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total round trip time for all SMB connections since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 22 } cwoAoSmbxStatsTotalRespTimeSaving OBJECT-TYPE SYNTAX TimeIntervalSec MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total response time saved due to SMB AO optimizations since it was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 23 } cwoAoSmbxStatsOpenFiles OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains number of files currently opened by SMB Application Optimizer." ::= { cwoAoSmbxStats 24 } cwoAoSmbxStatsTotalFilesInRACache OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total number of files in SMB Application optimizer Read Ahead cache." ::= { cwoAoSmbxStats 25 } cwoAoSmbxStatsRdL4SignWANBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of Layer 4 (L4) optimized signed bytes read from WAN by SMB Application Optimizer since the SMB Application Optimizer was started. L4 optimization comprises of TFO, DRE and LZ optimizations. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 26 } cwoAoSmbxStatsWrL4SignWANBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of Layer 4 (L4) optimized signed bytes written to WAN by SMB Application Optimizer since SMB Application Optimizer was started. L4 optimization comprises of TFO, DRE and LZ optimizations. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 27 } cwoAoSmbxStatsRdSignLANBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of signed bytes read from LAN by SMB Application Optimizer since the SMB Application Optimizer was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 28 } cwoAoSmbxStatsWrSignLANBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of original signed bytes written to LAN by SMB Application Optimizer since SMB Application Optimizer was started. Discontinuities in the value of this counter can occur at re-initialization of the SMB AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the SMB AO." ::= { cwoAoSmbxStats 29 } -- Extended statistics for HTTP AO cwoAoHttpxStats OBJECT IDENTIFIER ::= { cwoAo 3 } cwoAoHttpxStatsTotalSavedTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total time saved due to optimizations done by HTTP AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the HTTP AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the HTTP AO." ::= { cwoAoHttpxStats 1 } cwoAoHttpxStatsTotalRTT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total Round Trip Time (RTT) for all the connections going through HTTP AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the HTTP AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the HTTP AO." ::= { cwoAoHttpxStats 2 } cwoAoHttpxStatsTotalMDCMTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total time for Meta Data Cache Misses (MDCM) for HTTP AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the HTTP AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the HTTP AO." ::= { cwoAoHttpxStats 3 } cwoAoHttpxStatsEstSavedTime OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates percentage estimated time saved due to optimizations done by HTTP AO since it was started." ::= { cwoAoHttpxStats 4 } cwoAoHttpxStatsTotalSPSessions OBJECT-TYPE SYNTAX Counter64 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of SharePoint Optimized HTTP sessions. This counter is incremented for every session on which SharePoint optimization can be performed. An HTTP session is tagged as a SharePoint Session based on the information present in the HTTP request." ::= { cwoAoHttpxStats 5 } cwoAoHttpxStatsTotalSPPFSessions OBJECT-TYPE SYNTAX Counter64 UNITS "sessions" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of SharePoint Pre-fetch optimized HTTP sessions. This counter is incremented for every session on which SharePoint pre-fetch optimization can be performed. An HTTP session is tagged as a SharePoint pre-fetch Session based on the information present in the HTTP request. A pre-fetch operation is one where the edge WAAS device fetches the next set of data (which it anticipates the client will request later) from the server based on the current HTTP Request information." ::= { cwoAoHttpxStats 6 } cwoAoHttpxStatsTotalSPPFObjects OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of pre-fetched objects served locally for SharePoint pre-fetch sessions. The edge WAAS device maintains a local cache where the pre-fetched responses are saved. This object is incremented whenever the SharePoint client request is served from the pre-fetch cache." ::= { cwoAoHttpxStats 7 } cwoAoHttpxStatsTotalSPRTTSaved OBJECT-TYPE SYNTAX Counter64 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains total Round Trip Time (RTT) saved due to SharePoint pre-fetch optimizations since SharePoint pre-fetch optimization was started. Discontinuities in the value of this counter can occur at re-initialization of the HTTP AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the HTTP AO." ::= { cwoAoHttpxStats 8 } cwoAoHttpxStatsTotalSPPFMissTime OBJECT-TYPE SYNTAX Counter64 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total time for SharePoint pre-fetch Cache Misses since SharePoint pre-fetch optimization was started. Discontinuities in the value of this counter can occur at re-initialization of the HTTP AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the HTTP AO." ::= { cwoAoHttpxStats 9 } cwoAoHttpxStatsAKC OBJECT IDENTIFIER ::= { cwoAoHttpxStats 10 } cwoAoHttpxStatsAKCBypassEntry OBJECT IDENTIFIER ::= { cwoAoHttpxStatsAKC 1 } cwoAoHttpxStatsAKCStdEntry OBJECT IDENTIFIER ::= { cwoAoHttpxStatsAKC 2 } cwoAoHttpxStatsAKCBasicEntry OBJECT IDENTIFIER ::= { cwoAoHttpxStatsAKC 3 } cwoAoHttpxStatsAKCAdvEntry OBJECT IDENTIFIER ::= { cwoAoHttpxStatsAKC 4 } cwoAoHttpxStatsAKCTotalEntry OBJECT IDENTIFIER ::= { cwoAoHttpxStatsAKC 5 } cwoAoHttpxStatsAKCPrepTable OBJECT-TYPE SYNTAX SEQUENCE OF CwoAoHttpxStatsAKCPrepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table gives statistics of Akamai Preposition tasks." ::= { cwoAoHttpxStatsAKC 6 } cwoAoHttpxStatsAKCPrepEntry OBJECT-TYPE SYNTAX CwoAoHttpxStatsAKCPrepEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry containing statistics for a particular Akamai Preposition task." INDEX { cwoAoHttpxStatsAKCPrepTaskName } ::= { cwoAoHttpxStatsAKCPrepTable 1 } CwoAoHttpxStatsAKCPrepEntry ::= SEQUENCE { cwoAoHttpxStatsAKCPrepTaskName OCTET STRING, cwoAoHttpxStatsAKCPrepStatus CwoHttpAKCPrepStatus, cwoAoHttpxStatsAKCPrepCacheStoreBytes Gauge32, cwoAoHttpxStatsAKCPrepUncacheStoreBytes Gauge32 } cwoAoHttpxStatsAKCPrepTaskName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the preposition task in Akamai connected cache preposition operation." ::= { cwoAoHttpxStatsAKCPrepEntry 1 } cwoAoHttpxStatsAKCPrepStatus OBJECT-TYPE SYNTAX CwoHttpAKCPrepStatus MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the current status of the preposition task in Akamai connected cache preposition operation." ::= { cwoAoHttpxStatsAKCPrepEntry 2 } cwoAoHttpxStatsAKCPrepCacheStoreBytes OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes stored in the cache for a particular preposition task in Akamai connected cache preposition operation." ::= { cwoAoHttpxStatsAKCPrepEntry 3 } cwoAoHttpxStatsAKCPrepUncacheStoreBytes OBJECT-TYPE SYNTAX Gauge32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes not stored in the cache for a particular preposition task in Akamai connected cache preposition operation." ::= { cwoAoHttpxStatsAKCPrepEntry 4 } cwoAoHttpxStatsAKCBypassCacheTrans OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Akamai connected cache statistics for total number of cache-bypass transactions that were handled in bypass mode transparent cache profile. When bypass mode transparent cache profile is set for a particular hostname, the caching for the hostname specified in a rule is suppressed. In this mode, the cache-engine turns off caching for one or more configured sites." ::= { cwoAoHttpxStatsAKCBypassEntry 1 } cwoAoHttpxStatsAKCBypassRespBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes saved for cache-hit HTTP transactions in bypass mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBypassEntry 2 } cwoAoHttpxStatsAKCBypassCacheTransPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of cache-hit HTTP transactions in bypass mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBypassEntry 3 } cwoAoHttpxStatsAKCBypassRespBytesPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of response bytes saved for cache-hit HTTP transactions in bypass mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBypassEntry 4 } cwoAoHttpxStatsAKCBypassCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total response time saved for cache-hit HTTP transactions in bypass mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCBypassEntry 5 } cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average response time saved per cache-hit HTTP transaction in bypass mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCBypassEntry 6 } cwoAoHttpxStatsAKCBypassRespTimeSavedPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total response time saved for cache-hit HTTP transactions in bypass mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBypassEntry 7 } cwoAoHttpxStatsAKCStdCacheTrans OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Akamai connected cache statistics for total number of cache-hit transactions that were served from cache in standard mode transparent cache profile. This is a default mode.In this mode, the cache engine also follows the RFC-2616 behavior for cache control headers with the exception of not honoring the client cache override behavior." ::= { cwoAoHttpxStatsAKCStdEntry 1 } cwoAoHttpxStatsAKCStdRespBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes saved for cache-hit HTTP transactions in standard mode transparent cache profile." ::= { cwoAoHttpxStatsAKCStdEntry 2 } cwoAoHttpxStatsAKCStdCacheTransPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of cache-hit HTTP transactions in standard mode transparent cache profile." ::= { cwoAoHttpxStatsAKCStdEntry 3 } cwoAoHttpxStatsAKCStdRespBytesPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of response bytes saved for cache-hit HTTP transactions in standard mode transparent cache profile." ::= { cwoAoHttpxStatsAKCStdEntry 4 } cwoAoHttpxStatsAKCStdCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total response time saved for cache-hit HTTP transactions in standard mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCStdEntry 5 } cwoAoHttpxStatsAKCStdAvgCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average response time saved per cache-hit HTTP transaction in standard mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCStdEntry 6 } cwoAoHttpxStatsAKCStdRespTimeSavedPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total response time saved for cache-hit HTTP transactions in standard mode transparent cache profile." ::= { cwoAoHttpxStatsAKCStdEntry 7 } cwoAoHttpxStatsAKCBasicCacheTrans OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Akamai connected cache statistics for total number of cache-hit transactions that were served from cache in basic mode transparent cache profile. In this mode, the cache engine works in strict RFC-2616 behavior, and therefore, only caches responses that are marked explicitly as cacheable with cache-control headers or responses that have an expiry header to service and accelerate traffic from a datacenter to a branch office over any type of IP network." ::= { cwoAoHttpxStatsAKCBasicEntry 1 } cwoAoHttpxStatsAKCBasicRespBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes saved for cache-hit HTTP transactions in basic mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBasicEntry 2 } cwoAoHttpxStatsAKCBasicCacheTransPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of cache-hit HTTP transactions in basic mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBasicEntry 3 } cwoAoHttpxStatsAKCBasicRespBytesPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of response bytes saved for cache-hit HTTP transactions in basic mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBasicEntry 4 } cwoAoHttpxStatsAKCBasicCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total response time saved for cache-hit HTTP transactions in basic mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCBasicEntry 5 } cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average response time saved per cache-hit HTTP transaction in basic mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCBasicEntry 6 } cwoAoHttpxStatsAKCBasicRespTimeSavedPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total response time saved for cache-hit HTTP transactions in basic mode transparent cache profile." ::= { cwoAoHttpxStatsAKCBasicEntry 7 } cwoAoHttpxStatsAKCAdvCacheTrans OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the Akamai connected cache statistics for total number of cache-hit transactions that were served from cache in advanced mode transparent cache profile. In advanced mode,the cache engine caches media types more aggressively, and caches all object types for longer time (when there is no explicit expiration time)." ::= { cwoAoHttpxStatsAKCAdvEntry 1 } cwoAoHttpxStatsAKCAdvRespBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes saved for cache-hit HTTP transactions in advanced mode transparent cache profile." ::= { cwoAoHttpxStatsAKCAdvEntry 2 } cwoAoHttpxStatsAKCAdvCacheTransPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of cache-hit HTTP transactions in advanced mode transparent cache profile." ::= { cwoAoHttpxStatsAKCAdvEntry 3 } cwoAoHttpxStatsAKCAdvRespBytesPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of response bytes saved for cache-hit HTTP transactions in advanced mode transparent cache profile." ::= { cwoAoHttpxStatsAKCAdvEntry 4 } cwoAoHttpxStatsAKCAdvCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total response time saved for cache-hit HTTP transactions in advanced mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCAdvEntry 5 } cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average response time saved per cache-hit HTTP transaction in advanced mode transparent cache profile, in milli-seconds." ::= { cwoAoHttpxStatsAKCAdvEntry 6 } cwoAoHttpxStatsAKCAdvRespTimeSavedPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total response time saved for cache-hit HTTP transactions in advanced mode transparent cache profile." ::= { cwoAoHttpxStatsAKCAdvEntry 7 } cwoAoHttpxStatsAKCTotalCacheTrans OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the aggregation of all the statistics related to various Akamai Connected Cache profile types - Bypass, Standard, Basic and Advanced." ::= { cwoAoHttpxStatsAKCTotalEntry 1 } cwoAoHttpxStatsAKCTotalRespBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of response bytes saved for cache-hit HTTP transactions in all transparent cache profile modes." ::= { cwoAoHttpxStatsAKCTotalEntry 2 } cwoAoHttpxStatsAKCTotalCacheTransPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of cache-hit HTTP transactions in all transparent cache profile modes." ::= { cwoAoHttpxStatsAKCTotalEntry 3 } cwoAoHttpxStatsAKCTotalRespBytesPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total number of response bytes saved for cache-hit HTTP transactions in all transparent cache profile modes." ::= { cwoAoHttpxStatsAKCTotalEntry 4 } cwoAoHttpxStatsAKCTotalCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total response time saved for cache-hit HTTP transactions in all transparent cache profile modes, in milli-seconds." ::= { cwoAoHttpxStatsAKCTotalEntry 5 } cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSaved OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the average response time saved per cache-hit HTTP transaction in all transparent cache profile modes, in milli-seconds." ::= { cwoAoHttpxStatsAKCTotalEntry 6 } cwoAoHttpxStatsAKCTotalRespTimeSavedPercent OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the percentage of total response time saved for Cache-hit HTTP transactions in all transparent cache profile modes." ::= { cwoAoHttpxStatsAKCTotalEntry 7 } -- Extended statistics for MAPI AO cwoAoMapixStats OBJECT IDENTIFIER ::= { cwoAo 4 } cwoAoMapixStatsUnEncrALRT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Average Local Response Time (ALRT) for unencrypted connections of MAPI AO since it was started." ::= { cwoAoMapixStats 1 } cwoAoMapixStatsEncrALRT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Average Local Response Time (ALRT) for encrypted connections of MAPI AO since it was started." ::= { cwoAoMapixStats 2 } cwoAoMapixStatsUnEncrARRT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Average Remote Response Time (ARRT) for unencrypted connections of MAPI AO since it was started." ::= { cwoAoMapixStats 3 } cwoAoMapixStatsEncrARRT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Average Remote Response Time (ARRT) for encrypted connections of MAPI AO since it was started." ::= { cwoAoMapixStats 4 } cwoAoMapixStatsTotalUnEncrLRs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total requests served locally for unencrypted connections by MAPI AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the MAPI AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the MAPI AO." ::= { cwoAoMapixStats 5 } cwoAoMapixStatsTotalEncrLRs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total requests served locally for encrypted connections by MAPI AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the MAPI AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the MAPI AO." ::= { cwoAoMapixStats 6 } cwoAoMapixStatsTotalUnEncrRRs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total Remote Requests(RR) served by remote servers for unencrypted connections of MAPI AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the MAPI AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the MAPI AO." ::= { cwoAoMapixStats 7 } cwoAoMapixStatsTotalEncrRRs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total Remote Requests(RR) served by remote servers for encrypted connections by MAPI AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the MAPI AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the MAPI AO." ::= { cwoAoMapixStats 8 } cwoAoMapixStatsUnEncrAvgRedTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates average time reduced for unencrypted connections due to optimizations done by MAPI AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the MAPI AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the MAPI AO." ::= { cwoAoMapixStats 9 } cwoAoMapixStatsEncrAvgRedTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates average time reduced for encrypted connections due to optimizations done by MAPI AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the MAPI AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the MAPI AO." ::= { cwoAoMapixStats 10 } -- Extended statistics for NFS AO cwoAoNfsxStats OBJECT IDENTIFIER ::= { cwoAo 5 } cwoAoNfsxStatsALRT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Average Local Response Time (ALRT) for NFS AO since it was started." ::= { cwoAoNfsxStats 1 } cwoAoNfsxStatsARRT OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates Average Remote Response Time (ARRT) for NFS AO since it was started." ::= { cwoAoNfsxStats 2 } cwoAoNfsxStatsTotalLRs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total requests served locally by NFS AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the NFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the NFS AO." ::= { cwoAoNfsxStats 3 } cwoAoNfsxStatsTotalRRs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total Remote Requests (RR) served by remote servers for NFS AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the NFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the NFS AO." ::= { cwoAoNfsxStats 4 } cwoAoNfsxStatsEstTimeSaved OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates percentage estimated time saved due to optimizations done by NFS AO since it was started." ::= { cwoAoNfsxStats 5 } -- Extended statistics for Video AO cwoAoVideoxStats OBJECT IDENTIFIER ::= { cwoAo 6 } cwoAoVideoxStatsTotalInBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates total incoming bytes for Video AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the Video AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the Video AO." ::= { cwoAoVideoxStats 1 } cwoAoVideoxStatsTotalOutBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates total outgoing bytes for Video AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the Video AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the Video AO." ::= { cwoAoVideoxStats 2 } -- Extended Statistics for CIFS AO cwoAoCifsxStats OBJECT IDENTIFIER ::= { cwoAo 7 } cwoAoCifsxStatsTotalReadBytes OBJECT-TYPE SYNTAX Counter32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the total bytes read by clients from the client side (via cache or remotely) using CIFS AO since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 1 } cwoAoCifsxStatsTotalWrittenBytes OBJECT-TYPE SYNTAX Counter32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the total bytes written to the client-side using the CIFS AO since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 2 } cwoAoCifsxStatsTotalRemoteReqs OBJECT-TYPE SYNTAX Counter32 UNITS "requests" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the total requests sent to remote file server since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 3 } cwoAoCifsxStatsTotalLocalReqs OBJECT-TYPE SYNTAX Counter32 UNITS "requests" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the total number requests served locally by CIFS AO since it was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 4 } cwoAoCifsxStatsTotalRemoteTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the total duration of time taken by CIFS AO to process all remote requests since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 5 } cwoAoCifsxStatsTotalLocalTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the total duration of time taken by CIFS AO to process all local requests since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 6 } cwoAoCifsxStatsConnectedSessions OBJECT-TYPE SYNTAX Gauge32 UNITS "sessions" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the number of currently connected CIFS sessions." ::= { cwoAoCifsxStats 7 } cwoAoCifsxStatsOpenFiles OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the number of currently open CIFS files." ::= { cwoAoCifsxStats 8 } cwoAoCifsxStatsMaxCacheSize OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the maximum disk space (in KB) allocated for data in the CIFS AO cache." ::= { cwoAoCifsxStats 9 } cwoAoCifsxStatsCurrentCacheSize OBJECT-TYPE SYNTAX Gauge32 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the amount of disk space (in KB), currently being used for data in the CIFS AO cache." ::= { cwoAoCifsxStats 10 } cwoAoCifsxStatsMaxCacheResources OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the maximum number of cache resources (files and directories) supported by the CIFS AO cache, regardless of the size of these resources." ::= { cwoAoCifsxStats 11 } cwoAoCifsxStatsCacheResources OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the number of cache resources (files and directories) currently held in the CIFS AO cache." ::= { cwoAoCifsxStats 12 } cwoAoCifsxStatsEvictedResources OBJECT-TYPE SYNTAX Counter32 UNITS "files" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the number of cache resources (files and directories) that have been evicted from the cache since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 13 } cwoAoCifsxStatsLastEvictedTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the time when cache resources (files and directories) were last evicted from the CIFS AO cache. 00:00 is displayed if no cache resources have been evicted since CIFS AO was started." ::= { cwoAoCifsxStats 14 } cwoAoCifsxStatsVolHiWatermark OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the disk usage high watermark in percentage that triggers the eviction of resources from the CIFS AO cache." ::= { cwoAoCifsxStats 15 } cwoAoCifsxStatsVolLoWatermark OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the target disk usage low watermark percentage to be reached via cache eviction when triggered by cfVolHiWatermark. When this low watermark is reached, cache eviction stops." ::= { cwoAoCifsxStats 16 } cwoAoCifsxStatsAmntHiWatermark OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the target percentage of maximum cache resources (defined by cfMaxCacheResources) that triggers the eviction of resources from the CIFS AO cache." ::= { cwoAoCifsxStats 17 } cwoAoCifsxStatsAmntLoWatermark OBJECT-TYPE SYNTAX Gauge32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the target percentage of maximum cache resources (defined by cfMaxCacheResources) to be reached via cache eviction when triggered by cfAmntHiWatermark. When this low watermark is reached, cache eviction stops." ::= { cwoAoCifsxStats 18 } cwoAoCifsxStatsEvictedAge OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the amount of time spent in the CIFS AO cache by the resource that was last evicted. If this amount is too short or too long, it is recommended to modify the size of the cache." ::= { cwoAoCifsxStats 19 } cwoAoCifsxStatsEvictedLastAccess OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object indicates the value of sysUpTime when the resource, which was last evicted from the CIFS AO cache has been last accessed." ::= { cwoAoCifsxStats 20 } cwoAoCifsxStatsFFTotalReqs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object contains total number of FindFirst (FF) requests since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 21 } cwoAoCifsxStatsFFRemoteReqs OBJECT-TYPE SYNTAX Counter64 UNITS "requests" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object contains total number of FindFirst (FF) requests sent to the remote file-server since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 22 } cwoAoCifsxStatsFFLocalRespTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object contains the average local response time for FindFirst (FF) requests replied locally since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 23 } cwoAoCifsxStatsFFRemoteRespTime OBJECT-TYPE SYNTAX CiscoMilliSeconds UNITS "milliseconds" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object contains the average remote response time for FindFirst (FF) requests replied remotely since CIFS AO was started. Discontinuities in the value of this counter can occur at re-initialization of the CIFS AO. The last discontinuity time is indicated by the value of cwoAoStatsLastResetTime for the CIFS AO." ::= { cwoAoCifsxStats 24 } cwoAoCifsxStatsDirResources OBJECT-TYPE SYNTAX Gauge32 UNITS "files" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "This object contains the total number of currently allocated Directory Resources in CIFS AO." ::= { cwoAoCifsxStats 25 } -- Application statistics Table cwoAppStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CwoAppStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the statistics for applications configured on the wan optimization system." ::= { cwoApp 1 } cwoAppStatsEntry OBJECT-TYPE SYNTAX CwoAppStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing statistics for applications configured on the WAN optimization system. The WAN opimitization system creates an entry when a user configures an application for optimization. The WAN optimization system deletes an entry, when user removes the application from the configuration." INDEX { cwoAppStatsAppName } ::= { cwoAppStatsTable 1 } CwoAppStatsEntry ::= SEQUENCE { cwoAppStatsAppName SnmpAdminString, cwoAppStatsOriginalBytes Counter64, cwoAppStatsOptimizedBytes Counter64, cwoAppStatsPTBytes Counter64 } cwoAppStatsAppName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of a particular application, which is configured for optimization." ::= { cwoAppStatsEntry 1 } cwoAppStatsOriginalBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total original traffic (uncompressed) in bytes of a particular application that has entered into the system." ::= { cwoAppStatsEntry 2 } cwoAppStatsOptimizedBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total optimized traffic in bytes of a particular application." ::= { cwoAppStatsEntry 3 } cwoAppStatsPTBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total pass-through traffic in bytes of a particular application." ::= { cwoAppStatsEntry 4 } -- Policy map statistics table cwoPmapStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CwoPmapStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the staistics for active policy maps." ::= { cwoPmap 1 } cwoPmapStatsEntry OBJECT-TYPE SYNTAX CwoPmapStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describing statistics related with an active policy map of a given type. The WAN optimization system creates/deletes an entry for a policy map when it is made active/inactive through configuration changes." INDEX { cwoPmapStatsType, cwoPmapStatsName } ::= { cwoPmapStatsTable 1 } CwoPmapStatsEntry ::= SEQUENCE { cwoPmapStatsType CwoTypes, cwoPmapStatsName SnmpAdminString, cwoPmapStatsDescr SnmpAdminString, cwoPmapStatsTotalConns Counter64, cwoPmapStatsTotalBytes Counter64, cwoPmapStatsTotalPTConns Counter64, cwoPmapStatsTotalPTBytes Counter64 } cwoPmapStatsType OBJECT-TYPE SYNTAX CwoTypes MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates type of the policy map." ::= { cwoPmapStatsEntry 1 } cwoPmapStatsName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates name of the policy map." ::= { cwoPmapStatsEntry 2 } cwoPmapStatsDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the descriptive information of the policy map configured on the WAN optimization system. If the description is not configured for a given policy map then this string will contain a NULL string." ::= { cwoPmapStatsEntry 3 } cwoPmapStatsTotalConns OBJECT-TYPE SYNTAX Counter64 UNITS "connections" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total number of connections processed by the policy map since it is active." ::= { cwoPmapStatsEntry 4 } cwoPmapStatsTotalBytes OBJECT-TYPE SYNTAX Counter64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total bytes processed by the policy map since it is active." ::= { cwoPmapStatsEntry 5 } cwoPmapStatsTotalPTConns OBJECT-TYPE SYNTAX Counter64 UNITS "connections" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total connections, which are made as pass-through due to some reason by the policy map since it is active." ::= { cwoPmapStatsEntry 6 } cwoPmapStatsTotalPTBytes OBJECT-TYPE SYNTAX Counter64 UNITS "kilo-bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total bytes which are made pass-through by the policy map since it is active." ::= { cwoPmapStatsEntry 7 } -- Class map statistics table. cwoCmapStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF CwoCmapStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists the staistics for class maps associated with the active policy map." ::= { cwoCmap 1 } cwoCmapStatsEntry OBJECT-TYPE SYNTAX CwoCmapStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry describes statistics for the class maps associated with active policy maps. A new entry will be created for the class map when a new class map gets associated to the policy map through the configuration changes. An entry will be deleted, when the class map is disassociated from the active policy map through the configuration changes." INDEX { cwoCmapStatsType, cwoCmapStatsName } ::= { cwoCmapStatsTable 1 } CwoCmapStatsEntry ::= SEQUENCE { cwoCmapStatsType CwoTypes, cwoCmapStatsName SnmpAdminString, cwoCmapStatsDescr SnmpAdminString, cwoCmapStatsTotalConns Counter64, cwoCmapStatsTotalBytes Counter64, cwoCmapStatsTotalPTConns Counter64, cwoCmapStatsTotalPTBytes Counter64 } cwoCmapStatsType OBJECT-TYPE SYNTAX CwoTypes MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the type of the class map." ::= { cwoCmapStatsEntry 1 } cwoCmapStatsName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the name of the class map." ::= { cwoCmapStatsEntry 2 } cwoCmapStatsDescr OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the descriptive information of the class map configured on the WAN optimization system. If the description is not configured for a given class map then this string will contain a NULL string." ::= { cwoCmapStatsEntry 3 } cwoCmapStatsTotalConns OBJECT-TYPE SYNTAX Counter64 UNITS "connections" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total number of connections processed by the class map." ::= { cwoCmapStatsEntry 4 } cwoCmapStatsTotalBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total bytes processed by the class map." ::= { cwoCmapStatsEntry 5 } cwoCmapStatsTotalPTConns OBJECT-TYPE SYNTAX Counter64 UNITS "connections" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates total connections, which are made as pass-through due to some reason by the class map." ::= { cwoCmapStatsEntry 6 } cwoCmapStatsTotalPTBytes OBJECT-TYPE SYNTAX Counter64 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the total bytes which are made pass-through by the class map." ::= { cwoCmapStatsEntry 7 } -- Notifications cwoTfoConnectionOverload NOTIFICATION-TYPE OBJECTS { cwoTfoStatsMaxActiveConn } STATUS current DESCRIPTION "This notification indicates that the device has reached its limit of number of connections it can optimize. No new connections will be picked-up for optimization, while the device is in this state." ::= { ciscoWanOptimizationMIBNotifs 1 } cwoPeerOverload NOTIFICATION-TYPE OBJECTS { cwoGeneralMaxActivePeers } STATUS current DESCRIPTION "This notification indicates the device has reached its limit of number of peer devices with which it can optimize connections. While the device is in this state, connections from new peer device will not be picked-up for optimization." ::= { ciscoWanOptimizationMIBNotifs 2 } cwoCpuThrottlingOn NOTIFICATION-TYPE OBJECTS { cwoGeneralCpuThrottleHigh, cwoGeneralCpuThrottlPeriod, cpmCPUTotalMonIntervalValue } STATUS current DESCRIPTION "This notification indicates that the device has detected that the current CPU utilization (stored in cpmCPUTotalMonIntervalValue) is higher than the cwoGeneralCpuThrottleHigh. As a result the device has entered into a throttling mode due to which connections under optimization may experience slowdown. This notification is generated the moment it occurs after a time lapse of 30 minutes since the previous notification." ::= { ciscoWanOptimizationMIBNotifs 3 } cwoCpuThrottlingOff NOTIFICATION-TYPE OBJECTS { cwoGeneralCpuThrottleLow, cwoGeneralCpuThrottlPeriod, cpmCPUTotalMonIntervalValue } STATUS current DESCRIPTION "This notification indicates that device has detected that the CPU utilization of device (stored in cpmCPUTotalMonIntervalValue) has fallen below the cwoGeneralCpuThrottleLow from cwoGeneralCpuThrottleHigh. As a result the device has come out of the throttling mode and there should not be any negative impact of CPU usage on connection under optimization. This notification is generated the moment it occurs after a time lapse of 30 minutes since the previous notification." ::= { ciscoWanOptimizationMIBNotifs 4 } cwoLicenseExpired NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification is generated when the license on the system expires after the period for which it was installed." ::= { ciscoWanOptimizationMIBNotifs 5 } cwoLicenseRevoked NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification is generated when a requested revoke ticket is obtained. This ticket could have been requested in order to move the license to a different system." ::= { ciscoWanOptimizationMIBNotifs 6 } cwoLicenseDeleted NOTIFICATION-TYPE STATUS current DESCRIPTION "This notification is generated when the license on the system is cleared." ::= { ciscoWanOptimizationMIBNotifs 7 } -- compliance statements ciscoWanOptimizationMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "This is a default module-compliance containing default object groups." MODULE -- this module MANDATORY-GROUPS { cwoTfoBaseGroup, cwoOverloadNotificationGroup } GROUP cwoGeneralGroup DESCRIPTION "This group is optional and indicates general statistics for WAN optimization system/sub-system." GROUP cwoTfoExtGroup DESCRIPTION "This group is optional and includes more specific stats for TFO." GROUP cwoAoStatsGroup DESCRIPTION "This group includes common statistics for AO. It is optional for systems which does not support any AO." GROUP cwoCpuNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoAoSmbExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems who does not support SMB AO." ::= { ciscoWanOptimizationMIBCompliances 1 } ciscoWanOptimizationMIBCompliance1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "This is a default module-compliance containing default object groups." MODULE -- this module MANDATORY-GROUPS { cwoTfoBaseGroup, cwoOverloadNotificationGroup } GROUP cwoGeneralGroup DESCRIPTION "This group is optional and indicates general statistics for WAN optimization system/sub-system." GROUP cwoTfoExtGroup DESCRIPTION "This group is optional and includes more specific stats for TFO." GROUP cwoAoStatsGroup DESCRIPTION "This group includes common statistics for AO. It is optional for systems which does not support any AO." GROUP cwoCpuNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoAoSmbExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems who does not support SMB AO." GROUP cwoLicenseNotificationGroup DESCRIPTION "This group is optional for systems that have wan optimization." ::= { ciscoWanOptimizationMIBCompliances 2 } ciscoWanOptimizationMIBComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "This is a default module-compliance containing default object groups. This compliance module deprecates ciscoWanOptimizationMIBCompliance1." MODULE -- this module MANDATORY-GROUPS { cwoTfoBaseGroup } GROUP cwoGeneralGroup DESCRIPTION "This group is optional and indicates general statistics for WAN optimization system/sub-system." GROUP cwoCpuNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoOverloadNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoLicenseNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoAoHttpExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoMapiExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support MAPI AO." GROUP cwoAoNfsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support NFS AO." GROUP cwoAoVideoExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support Video AO." GROUP cwoAoCifsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support CIFS AO." GROUP cwoAoApplicationStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not associates applications with AOs." GROUP cwoAoPolicyMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement policy map for processing traffic." GROUP cwoAoClassMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement class-maps for processing traffic." GROUP cwoAoStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoTfoExtGroupRev1 DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoTfoExtGroup DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoAoStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoSmbExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization system, which does not support SMB AO." ::= { ciscoWanOptimizationMIBCompliances 3 } ciscoWanOptimizationMIBComplianceRev3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "This is a default module-compliance containing default object groups. This compliance module deprecates ciscoWanOptimizationMIBComplianceRev2." MODULE -- this module MANDATORY-GROUPS { cwoTfoBaseGroup } GROUP cwoGeneralGroup DESCRIPTION "This group is optional and indicates general statistics for WAN optimization system/sub-system." GROUP cwoCpuNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoOverloadNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoLicenseNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoAoHttpExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoMapiExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support MAPI AO." GROUP cwoAoNfsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support NFS AO." GROUP cwoAoVideoExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support Video AO." GROUP cwoAoCifsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support CIFS AO." GROUP cwoAoApplicationStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not associates applications with AOs." GROUP cwoAoPolicyMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement policy map for processing traffic." GROUP cwoAoClassMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement class-maps for processing traffic." GROUP cwoAoStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoTfoExtGroupRev1 DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoTfoExtGroup DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoAoStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoSmbExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization system, which does not support SMB AO." GROUP cwoAoHttpExtendedStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoCifsExtendedStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support CIFS AO." ::= { ciscoWanOptimizationMIBCompliances 4 } ciscoWanOptimizationMIBComplianceRev4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "This is a default module-compliance containing default object groups. This compliance module deprecates ciscoWanOptimizationMIBComplianceRev3." MODULE -- this module MANDATORY-GROUPS { cwoTfoBaseGroup } GROUP cwoGeneralGroup DESCRIPTION "This group is optional and indicates general statistics for WAN optimization system/sub-system." GROUP cwoCpuNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoOverloadNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoLicenseNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoAoHttpExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoMapiExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support MAPI AO." GROUP cwoAoNfsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support NFS AO." GROUP cwoAoVideoExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support Video AO." GROUP cwoAoCifsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support CIFS AO." GROUP cwoAoApplicationStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not associates applications with AOs." GROUP cwoAoPolicyMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement policy map for processing traffic." GROUP cwoAoClassMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement class-maps for processing traffic." GROUP cwoAoStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoTfoExtGroupRev1 DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoTfoExtGroup DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoAoStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoSmbExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization system, which does not support SMB AO." GROUP cwoAoHttpExtendedStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoCifsExtendedStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support CIFS AO." GROUP cwoAoSmbExtendedStatsGroupRev1 DESCRIPTION "This group is mandatory only for WAN optimization system that support Signed Bytes statistics for SMB AO." ::= { ciscoWanOptimizationMIBCompliances 5 } ciscoWanOptimizationMIBComplianceRev5 MODULE-COMPLIANCE STATUS current DESCRIPTION "This is a default module-compliance containing default object groups. This compliance module deprecates ciscoWanOptimizationMIBComplianceRev4." MODULE -- this module MANDATORY-GROUPS { cwoTfoBaseGroup } GROUP cwoGeneralGroup DESCRIPTION "This group is optional and indicates general statistics for WAN optimization system/sub-system." GROUP cwoCpuNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service" GROUP cwoOverloadNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoLicenseNotificationGroup DESCRIPTION "This group is optional to implement, but mandatory for systems which run WAN optimization as a service." GROUP cwoAoHttpExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoMapiExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support MAPI AO." GROUP cwoAoNfsExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support NFS AO." GROUP cwoAoApplicationStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not associates applications with AOs." GROUP cwoAoPolicyMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement policy map for processing traffic." GROUP cwoAoClassMapStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not implement class-maps for processing traffic." GROUP cwoAoStatsGroup DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoTfoExtGroupRev1 DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoTfoExtGroup DESCRIPTION "This group is optional for system supporting TFO AO." GROUP cwoAoStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support various AOs for traffic optimization." GROUP cwoAoSmbExtendedStatsGroup DESCRIPTION "This group is optional for WAN optimization system, which does not support SMB AO." GROUP cwoAoHttpExtendedStatsGroupRev1 DESCRIPTION "This group is optional for WAN optimization systems which does not support HTTP AO." GROUP cwoAoSmbExtendedStatsGroupRev1 DESCRIPTION "This group is mandatory only for WAN optimization system that support Signed Bytes statistics for SMB AO." GROUP cwoAoHttpExtendedStatsGroupRev2 DESCRIPTION "This group is mandatory only for WAN optimization system that support Akamai Cache statistics for HTTP AO" GROUP cwoDreCacheStatsGroup DESCRIPTION "This group is optional for system supporting DRE cache statistics." GROUP cwoDrePerfStatsGroup DESCRIPTION "This group is optional for system supporting DRE performance statistics." ::= { ciscoWanOptimizationMIBCompliances 6 } -- Groups ciscoWanOptimizationMIBGroups OBJECT IDENTIFIER ::= { ciscoWanOptimizationMIBConform 2 } cwoGeneralGroup OBJECT-GROUP OBJECTS { cwoGeneralActivePeers, cwoGeneralMaxActivePeers, cwoGeneralCpuThrottleHigh, cwoGeneralCpuThrottleLow, cwoGeneralCpuThrottlPeriod } STATUS current DESCRIPTION "This collection of objects represent the general statistics of WAN optimization system/sub-system." ::= { ciscoWanOptimizationMIBGroups 1 } cwoTfoBaseGroup OBJECT-GROUP OBJECTS { cwoTfoStatsTotalOptConn, cwoTfoStatsActiveOptConn, cwoTfoStatsMaxActiveConn, cwoTfoStatsTotalNormalClosedConn, cwoTfoStatsResetConn } STATUS current DESCRIPTION "This collection of objects represent the common statistics for TFO." ::= { ciscoWanOptimizationMIBGroups 2 } cwoTfoExtGroup OBJECT-GROUP OBJECTS { cwoTfoStatsActiveOptTCPPlusConn, cwoTfoStatsActiveOptTCPOnlyConn, cwoTfoStatsActiveOptTCPPrepConn, cwoTfoStatsActiveADConn, cwoTfoStatsReservedConn, cwoTfoStatsPendingConn, cwoTfoStatsActivePTConn } STATUS current DESCRIPTION "This collection of objects represent the statistics for TFO, which are optional." ::= { ciscoWanOptimizationMIBGroups 3 } cwoAoStatsGroup OBJECT-GROUP OBJECTS { cwoAoStatsIsConfigured, cwoAoStatsIsLicensed, cwoAoStatsOperationalState, cwoAoStatsStartUpTime, cwoAoStatsTotalHandledConns, cwoAoStatsTotalOptConns, cwoAoStatsTotalHandedOffConns, cwoAoStatsTotalDroppedConns, cwoAoStatsActiveOptConns, cwoAoStatsPendingConns, cwoAoStatsMaxActiveOptConns, cwoAoStatsLastResetTime } STATUS current DESCRIPTION "This group includes statistics for AO. Which are common for all AOs." ::= { ciscoWanOptimizationMIBGroups 4 } cwoOverloadNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cwoTfoConnectionOverload, cwoPeerOverload } STATUS current DESCRIPTION "This group contains notifications event for various overload condition on wan optimization system." ::= { ciscoWanOptimizationMIBGroups 5 } cwoCpuNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cwoCpuThrottlingOn, cwoCpuThrottlingOff } STATUS current DESCRIPTION "This group contains notifications event for wan optimization system, which are specific to some WAN optimization systems." ::= { ciscoWanOptimizationMIBGroups 6 } cwoAoSmbExtendedStatsGroup OBJECT-GROUP OBJECTS { cwoAoSmbxStatsBytesReadCache, cwoAoSmbxStatsBytesWriteCache, cwoAoSmbxStatsBytesReadServer, cwoAoSmbxStatsBytesWriteServer, cwoAoSmbxStatsBytesReadClient, cwoAoSmbxStatsBytesWriteClient, cwoAoSmbxStatsProcessedReqs, cwoAoSmbxStatsActiveReqs, cwoAoSmbxStatsTotalTimedOutReqs, cwoAoSmbxStatsTotalRemoteReqs, cwoAoSmbxStatsTotalLocalReqs, cwoAoSmbxStatsRemoteAvgTime, cwoAoSmbxStatsLocalAvgTime, cwoAoSmbxStatsRACacheHitCount, cwoAoSmbxStatsMDCacheHitCount, cwoAoSmbxStatsRACacheHitRate, cwoAoSmbxStatsMDCacheHitRate, cwoAoSmbxStatsMaxRACacheSize, cwoAoSmbxStatsMaxMDCacheSize, cwoAoSmbxStatsMDCacheSize, cwoAoSmbxStatsRAEvictedAge, cwoAoSmbxStatsRTT, cwoAoSmbxStatsTotalRespTimeSaving, cwoAoSmbxStatsOpenFiles, cwoAoSmbxStatsTotalFilesInRACache } STATUS current DESCRIPTION "This Group contains statistics which are specific to SMB AO." ::= { ciscoWanOptimizationMIBGroups 7 } cwoLicenseNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { cwoLicenseExpired, cwoLicenseRevoked, cwoLicenseDeleted } STATUS current DESCRIPTION "This group contains notifications event for actions on licensing on wan optimization systems." ::= { ciscoWanOptimizationMIBGroups 8 } cwoAoHttpExtendedStatsGroup OBJECT-GROUP OBJECTS { cwoAoHttpxStatsTotalSavedTime, cwoAoHttpxStatsTotalRTT, cwoAoHttpxStatsTotalMDCMTime, cwoAoHttpxStatsEstSavedTime } STATUS current DESCRIPTION "This group contains statistics which are specific to HTTP AO." ::= { ciscoWanOptimizationMIBGroups 9 } cwoAoMapiExtendedStatsGroup OBJECT-GROUP OBJECTS { cwoAoMapixStatsUnEncrALRT, cwoAoMapixStatsUnEncrARRT, cwoAoMapixStatsTotalUnEncrLRs, cwoAoMapixStatsTotalUnEncrRRs, cwoAoMapixStatsUnEncrAvgRedTime, cwoAoMapixStatsEncrALRT, cwoAoMapixStatsEncrARRT, cwoAoMapixStatsTotalEncrLRs, cwoAoMapixStatsTotalEncrRRs, cwoAoMapixStatsEncrAvgRedTime } STATUS current DESCRIPTION "This group contains statistics which are specific to MAPI AO." ::= { ciscoWanOptimizationMIBGroups 10 } cwoAoNfsExtendedStatsGroup OBJECT-GROUP OBJECTS { cwoAoNfsxStatsALRT, cwoAoNfsxStatsARRT, cwoAoNfsxStatsTotalLRs, cwoAoNfsxStatsTotalRRs, cwoAoNfsxStatsEstTimeSaved } STATUS current DESCRIPTION "This group contains statistics which are specific to NFS AO." ::= { ciscoWanOptimizationMIBGroups 11 } cwoAoVideoExtendedStatsGroup OBJECT-GROUP OBJECTS { cwoAoVideoxStatsTotalInBytes, cwoAoVideoxStatsTotalOutBytes } STATUS deprecated DESCRIPTION "This group contains statistics which are specific to Video AO. This group is deprecated as all the objects in cwoAoVideoxStats table are deprecated." ::= { ciscoWanOptimizationMIBGroups 12 } cwoAoCifsExtendedStatsGroup OBJECT-GROUP OBJECTS { cwoAoCifsxStatsTotalReadBytes, cwoAoCifsxStatsTotalWrittenBytes, cwoAoCifsxStatsTotalRemoteReqs, cwoAoCifsxStatsTotalLocalReqs, cwoAoCifsxStatsTotalRemoteTime, cwoAoCifsxStatsTotalLocalTime, cwoAoCifsxStatsConnectedSessions, cwoAoCifsxStatsOpenFiles, cwoAoCifsxStatsMaxCacheSize, cwoAoCifsxStatsCurrentCacheSize, cwoAoCifsxStatsMaxCacheResources, cwoAoCifsxStatsCacheResources, cwoAoCifsxStatsEvictedResources, cwoAoCifsxStatsLastEvictedTime, cwoAoCifsxStatsVolHiWatermark, cwoAoCifsxStatsVolLoWatermark, cwoAoCifsxStatsAmntHiWatermark, cwoAoCifsxStatsAmntLoWatermark, cwoAoCifsxStatsEvictedAge, cwoAoCifsxStatsEvictedLastAccess } STATUS deprecated DESCRIPTION "This group contains statistics which are specific to CIFS AO. This group is deprecated as all the objects in cwoAoCifsxStats table are deprecated." ::= { ciscoWanOptimizationMIBGroups 13 } cwoAoApplicationStatsGroup OBJECT-GROUP OBJECTS { cwoAppStatsOriginalBytes, cwoAppStatsOptimizedBytes, cwoAppStatsPTBytes } STATUS current DESCRIPTION "This group contains statistics for applications associated with AO." ::= { ciscoWanOptimizationMIBGroups 14 } cwoAoPolicyMapStatsGroup OBJECT-GROUP OBJECTS { cwoPmapStatsDescr, cwoPmapStatsTotalConns, cwoPmapStatsTotalBytes, cwoPmapStatsTotalPTConns, cwoPmapStatsTotalPTBytes } STATUS current DESCRIPTION "This group contains statistics for active policy map." ::= { ciscoWanOptimizationMIBGroups 15 } cwoAoClassMapStatsGroup OBJECT-GROUP OBJECTS { cwoCmapStatsDescr, cwoCmapStatsTotalConns, cwoCmapStatsTotalBytes, cwoCmapStatsTotalPTConns, cwoCmapStatsTotalPTBytes } STATUS current DESCRIPTION "This group contains statistics for class maps associated with active policy map." ::= { ciscoWanOptimizationMIBGroups 16 } cwoAoStatsGroupRev1 OBJECT-GROUP OBJECTS { cwoAoStatsLoadStatus, cwoAoStatsBwOpt } STATUS current DESCRIPTION "This group includes statistics, which are common for all AOs." ::= { ciscoWanOptimizationMIBGroups 17 } cwoAoTfoExtGroupRev1 OBJECT-GROUP OBJECTS { cwoTfoStatsLoadStatus } STATUS current DESCRIPTION "This collection of objects represent the statistics for TFO, which are optional." ::= { ciscoWanOptimizationMIBGroups 18 } cwoAoHttpExtendedStatsGroupRev1 OBJECT-GROUP OBJECTS { cwoAoHttpxStatsTotalSPSessions, cwoAoHttpxStatsTotalSPPFSessions, cwoAoHttpxStatsTotalSPPFObjects, cwoAoHttpxStatsTotalSPRTTSaved, cwoAoHttpxStatsTotalSPPFMissTime } STATUS current DESCRIPTION "This group contains statistics specific to cwoAoHttpxStats group enhancement and SharePoint AO." ::= { ciscoWanOptimizationMIBGroups 19 } cwoAoCifsExtendedStatsGroupRev1 OBJECT-GROUP OBJECTS { cwoAoCifsxStatsFFTotalReqs, cwoAoCifsxStatsFFRemoteReqs, cwoAoCifsxStatsFFLocalRespTime, cwoAoCifsxStatsFFRemoteRespTime, cwoAoCifsxStatsDirResources } STATUS deprecated DESCRIPTION "This group contains statistics specific to CIFS Atkins feature. This group is deprecated as all the objects in cwoAoCifsxStats table are deprecated." ::= { ciscoWanOptimizationMIBGroups 20 } cwoAoSmbExtendedStatsGroupRev1 OBJECT-GROUP OBJECTS { cwoAoSmbxStatsRdL4SignWANBytes, cwoAoSmbxStatsWrL4SignWANBytes, cwoAoSmbxStatsRdSignLANBytes, cwoAoSmbxStatsWrSignLANBytes } STATUS current DESCRIPTION "This group contains statistics specific to Signed Bytes Statistics feature for SMB AO." ::= { ciscoWanOptimizationMIBGroups 21 } cwoAoHttpExtendedStatsGroupRev2 OBJECT-GROUP OBJECTS { cwoAoHttpxStatsAKCBypassCacheTrans, cwoAoHttpxStatsAKCBypassRespBytes, cwoAoHttpxStatsAKCBypassCacheTransPercent, cwoAoHttpxStatsAKCBypassRespBytesPercent, cwoAoHttpxStatsAKCBypassCacheRespTimeSaved, cwoAoHttpxStatsAKCBypassAvgCacheRespTimeSaved, cwoAoHttpxStatsAKCBypassRespTimeSavedPercent, cwoAoHttpxStatsAKCStdCacheTrans, cwoAoHttpxStatsAKCStdRespBytes, cwoAoHttpxStatsAKCStdCacheTransPercent, cwoAoHttpxStatsAKCStdRespBytesPercent, cwoAoHttpxStatsAKCStdCacheRespTimeSaved, cwoAoHttpxStatsAKCStdAvgCacheRespTimeSaved, cwoAoHttpxStatsAKCStdRespTimeSavedPercent, cwoAoHttpxStatsAKCBasicCacheTrans, cwoAoHttpxStatsAKCBasicRespBytes, cwoAoHttpxStatsAKCBasicCacheTransPercent, cwoAoHttpxStatsAKCBasicRespBytesPercent, cwoAoHttpxStatsAKCBasicCacheRespTimeSaved, cwoAoHttpxStatsAKCBasicAvgCacheRespTimeSaved, cwoAoHttpxStatsAKCBasicRespTimeSavedPercent, cwoAoHttpxStatsAKCAdvCacheTrans, cwoAoHttpxStatsAKCAdvRespBytes, cwoAoHttpxStatsAKCAdvCacheTransPercent, cwoAoHttpxStatsAKCAdvRespBytesPercent, cwoAoHttpxStatsAKCAdvCacheRespTimeSaved, cwoAoHttpxStatsAKCAdvAvgCacheRespTimeSaved, cwoAoHttpxStatsAKCAdvRespTimeSavedPercent, cwoAoHttpxStatsAKCTotalCacheTrans, cwoAoHttpxStatsAKCTotalRespBytes, cwoAoHttpxStatsAKCTotalCacheTransPercent, cwoAoHttpxStatsAKCTotalRespBytesPercent, cwoAoHttpxStatsAKCTotalCacheRespTimeSaved, cwoAoHttpxStatsAKCTotalAvgCacheRespTimeSaved, cwoAoHttpxStatsAKCTotalRespTimeSavedPercent, cwoAoHttpxStatsAKCPrepStatus, cwoAoHttpxStatsAKCPrepCacheStoreBytes, cwoAoHttpxStatsAKCPrepUncacheStoreBytes } STATUS current DESCRIPTION "This group contains statistics specific to cwoAoHttpxStats group enhancement and HTTP Akamai Cache." ::= { ciscoWanOptimizationMIBGroups 22 } cwoDreCacheStatsGroup OBJECT-GROUP OBJECTS { cwoDreCacheStatsStatus, cwoDreCacheStatsAge, cwoDreCacheStatsTotal, cwoDreCacheStatsUsed, cwoDreCacheStatsDataUnitUsage, cwoDreCacheStatsReplacedOneHrDataUnit, cwoDreCacheStatsDataUnitAge, cwoDreCacheStatsSigblockUsage, cwoDreCacheStatsReplacedOneHrSigblock, cwoDreCacheStatsSigblockAge } STATUS current DESCRIPTION "This group contains statistics specific to DRE cache statistics." ::= { ciscoWanOptimizationMIBGroups 23 } cwoDrePerfStatsGroup OBJECT-GROUP OBJECTS { cwoDrePerfStatsEncodeCompressionRatio, cwoDrePerfStatsEncodeCompressionLatency, cwoDrePerfStatsEncodeAvgMsgSize, cwoDrePerfStatsDecodeCompressionRatio, cwoDrePerfStatsDecodeCompressionLatency, cwoDrePerfStatsDecodeAvgMsgSize } STATUS current DESCRIPTION "This group contains statistics specific to DRE performance statistics." ::= { ciscoWanOptimizationMIBGroups 24 } END