-- ***************************************************************** -- CISCO-TCPOFFLOAD-MIB.my: Cisco CIP TCP OFFLOAD MIB file -- -- April 1994, Mike Otto -- -- Copyright (c) 1994-1996, 1998 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** -- CISCO-TCPOFFLOAD-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF DisplayString, RowStatus, TruthValue FROM SNMPv2-TC ciscoMgmt FROM CISCO-SMI cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex FROM CISCO-CHANNEL-MIB; ciscoTcpOffloadMIB MODULE-IDENTITY LAST-UPDATED "9503300000Z" ORGANIZATION "cisco IBM engineering Working Group" CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "This is the MIB module for objects used to manage the cisco tcp offload feature. The IBM mainframe (host) supports TCP/IP. As a way to save cycles on the host, the TCP/IP stack can be run on the 3172. This offloads the host from the protocol processing and is known as TCP-OFFLOAD. This mib identifies the manageable objects for the TCP-OFFLOAD feature in the Cisco router." REVISION "9801060000Z" DESCRIPTION "With the addition of Cisco's new Channel Port Adapter cards, all the references to CIP in the MIB description and object descriptions are changed to CMCC (Cisco Mainframe Channel Connection). The object names in the form of cip... or cipCard... will remain the same, but will be valid objects for the Channel Port Adapter cards." REVISION "9504270000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 31 } tcpOffloadObjects OBJECT IDENTIFIER ::= { ciscoTcpOffloadMIB 1 } cipCardOffloadConfig OBJECT IDENTIFIER ::= {tcpOffloadObjects 1 } cipCardOffloadConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CipCardOffloadConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains configuration information for the TCP offload feature on the CMCC card. Changing these parameters will take effect immediately. The management station can create an entry in this table by setting the appropriate value in cipCardOffloadConfigRowStatus. All the objects in this table must be supplied for a successful create/set. " ::= {cipCardOffloadConfig 1 } cipCardOffloadConfigEntry OBJECT-TYPE SYNTAX CipCardOffloadConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of OFFLOAD configuration values." INDEX { cipCardEntryIndex, cipCardDtrBrdIndex, cipCardSubChannelIndex } ::= { cipCardOffloadConfigTable 1 } CipCardOffloadConfigEntry ::= SEQUENCE { cipCardOffloadConfigPath OCTET STRING (SIZE(2)), cipCardOffloadConfigDevice OCTET STRING (SIZE(2)), cipCardOffloadConfigIpAddr IpAddress, cipCardOffloadConfigHostName DisplayString (SIZE (1..10)), cipCardOffloadConfigRouterName DisplayString (SIZE (1..10)), cipCardOffloadConfigLinkHostAppl DisplayString (SIZE (1..10)), cipCardOffloadConfigLinkRouterAppl DisplayString (SIZE (1..10)), cipCardOffloadConfigAPIHostAppl DisplayString (SIZE (1..10)), cipCardOffloadConfigAPIRouterAppl DisplayString (SIZE (1..10)), cipCardOffloadConfigBroadcastEnable TruthValue, cipCardOffloadConfigRowStatus RowStatus } cipCardOffloadConfigPath OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "Hex path identifier for the escon director switch port containing the fiber from the channel on the host to which this CMCC CLAW task connects. This is a concatenation of the switch port number, the channel logical address (used by the host to associate an logical partition (LPAR) with the control unit), and the control unit logical address (address of a logical control unit used by the host to associate a group of physical devices). For a directly connected channel, the switch port number is usually 01." ::= {cipCardOffloadConfigEntry 1 } cipCardOffloadConfigDevice OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-create STATUS current DESCRIPTION "Two digit hex device address for the device the SNA host will use to communicate with the offload task on the CMCC. The address must be even." ::= {cipCardOffloadConfigEntry 2 } cipCardOffloadConfigIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "IP address of the host application for the offload task as specified in the HOME statement of the PROFILE TCPIP." ::= {cipCardOffloadConfigEntry 3 } cipCardOffloadConfigHostName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Host name parameter as specified in the DEVICE statement of the PROFILE TCPIP." ::= {cipCardOffloadConfigEntry 4 } cipCardOffloadConfigRouterName OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Workstation name parameter as specified in the DEVICE statement of the mainframe PROFILE TCPIP." ::= {cipCardOffloadConfigEntry 5 } cipCardOffloadConfigLinkHostAppl OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the application providing the IP link services, as specified in the mainframe configuration." ::= {cipCardOffloadConfigEntry 6 } cipCardOffloadConfigLinkRouterAppl OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the router application providing the IP link services, as specified in the mainframe configuration." ::= {cipCardOffloadConfigEntry 7 } cipCardOffloadConfigAPIHostAppl OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the mainframe application providing the API services, as specified in the mainframe configuration." ::= {cipCardOffloadConfigEntry 8 } cipCardOffloadConfigAPIRouterAppl OBJECT-TYPE SYNTAX DisplayString (SIZE (1..10)) MAX-ACCESS read-create STATUS current DESCRIPTION "Name of the router application providing the API services, as specified in the mainframe configuration." ::= {cipCardOffloadConfigEntry 9 } cipCardOffloadConfigBroadcastEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Control processing of broadcast frames for the path/device this instance of OFFLOAD is configured on. Enable turns broadcast processing on." ::= {cipCardOffloadConfigEntry 10 } cipCardOffloadConfigRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used by a management station to create or delete the row entry in cipCardOffloadConfigTable following the RowStatus textual convention." ::= {cipCardOffloadConfigEntry 11 } -- ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; -- -- Conformance Information -- ciscoTcpOffloadMibConformance OBJECT IDENTIFIER ::= { ciscoTcpOffloadMIB 2 } ciscoTcpOffloadMibCompliances OBJECT IDENTIFIER ::= { ciscoTcpOffloadMibConformance 1 } ciscoTcpOffloadMibGroups OBJECT IDENTIFIER ::= { ciscoTcpOffloadMibConformance 2 } -- -- Compliance Statements -- ciscoTcpOffloadMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the TcpIP Offload feature." MODULE MANDATORY-GROUPS { ciscoTcpOffloadGroup } ::= { ciscoTcpOffloadMibCompliances 1 } ciscoTcpOffloadGroup OBJECT-GROUP OBJECTS { -- Table Header -- cipCardOffloadConfigTable -- cipCardOffloadConfigEntry -- Table Indicies -- cipCardEntryIndex -- cipCardDtrBrdIndex -- cipCardSubChannelIndex -- cipCardOffloadConfigPath, cipCardOffloadConfigDevice, cipCardOffloadConfigIpAddr, cipCardOffloadConfigHostName, cipCardOffloadConfigRouterName, cipCardOffloadConfigLinkHostAppl, cipCardOffloadConfigLinkRouterAppl, cipCardOffloadConfigAPIHostAppl, cipCardOffloadConfigAPIRouterAppl, cipCardOffloadConfigBroadcastEnable, cipCardOffloadConfigRowStatus } STATUS current DESCRIPTION "A collection of objects providing configuration capability." ::= { ciscoTcpOffloadMibGroups 1} END