-- ***************************************************************** -- MIBS/CISCO-STACKMAKER-MIB.my: StackMaker MIB -- -- December 1996, Wenyu Lin -- -- Copyright (c) 1996-1997 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-STACKMAKER-MIB DEFINITIONS ::= BEGIN IMPORTS ciscoMgmt FROM CISCO-SMI MODULE-IDENTITY, OBJECT-TYPE, IpAddress FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF; ciscoStackMakerMIB MODULE-IDENTITY LAST-UPDATED "9610311200Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Postal: Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA Tel: +1 408 526 4000 E-mail: cs-stacks@cisco.com" DESCRIPTION "The MIB module for Cisco Systems' StackMaker." ::= { ciscoMgmt 59 } ciscoStackMakerMIBObjects OBJECT IDENTIFIER ::= { ciscoStackMakerMIB 1 } ciscoStackMakerConf OBJECT IDENTIFIER ::= { ciscoStackMakerMIBObjects 1 } csmStackName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION " A descriptive string used by the network administrator one stack at any given time. If this entry is empty, the device is not a member of a stack. Changing the value of this object will move the device to a different stack. If the value is cleared, the device is no longer a member of any stack." ::= { ciscoStackMakerConf 1 } csmClearStackTable OBJECT-TYPE SYNTAX INTEGER { clearTable(1), noClearTable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to clear the csmStackTable with a single SNMP operation. The application will clear the table and re-write the table to accommodate new or modified table entries. Setting this object to noClearTable has no effect. The agent will always return the value of noClearTable when this object is read." ::= { ciscoStackMakerConf 2 } csmStackTable OBJECT-TYPE SYNTAX SEQUENCE OF CsmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of IP addresses for the devices which are members of the stack. Individual entries can be added to the table to add devices in the stack either through SNMP Set operations or through the device's command line interface. However, the agent need not support deletion of individual entries, since the table is first cleared before any modifications are made, using the csmClearStackTable object. The agent will return the error badValue if an SNMP Set operation is attempted on an existing row. It is the responsibility of the network administrator to ensure that a device does not belong to more than one stack and to maintain referential integrity across devices. A device will take no action upon the information stored in this table other than to guarantee its persistence over device reboots." ::= { ciscoStackMakerConf 3 } csmStackEntry OBJECT-TYPE SYNTAX CsmStackEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry for each device which is member of the stack." INDEX { csmStackIndex } ::= { csmStackTable 1 } CsmStackEntry ::= SEQUENCE { csmStackIndex INTEGER, csmStackIpAddress IpAddress } csmStackIndex OBJECT-TYPE SYNTAX INTEGER (1..32) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index in the StackMaker table. Entries should be consecutive since updating this table is made by first clearing the table and reconfiguring it." ::= { csmStackEntry 1 } csmStackIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current -- STATUS mandatory DESCRIPTION "IP Address of a stack member." ::= { csmStackEntry 2 } -- conformance information ciscoStackMakerMIBConformance OBJECT IDENTIFIER ::= { ciscoStackMakerMIB 3 } ciscoStackMakerMIBCompliances OBJECT IDENTIFIER ::= { ciscoStackMakerMIBConformance 1 } ciscoStackMakerMIBGroups OBJECT IDENTIFIER ::= { ciscoStackMakerMIBConformance 2 } -- compliance statements ciscoStackMakerMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for Cisco Systems entities which implement the StackMaker model. Every Cisco stackable device must implement the StackMaker MIB." MODULE -- this module MANDATORY-GROUPS { ciscoStackMakerBasicGroup } ::= { ciscoStackMakerMIBCompliances 1 } -- units of conformance ciscoStackMakerBasicGroup OBJECT-GROUP OBJECTS { csmStackName, csmClearStackTable, csmStackIpAddress } STATUS current DESCRIPTION "A collection of objects providing identification for a Cisco Systems' entity which implements the StackMaker MIB." ::= { ciscoStackMakerMIBGroups 1 } END