-- ***************************************************************** -- CISCO-STACK-MIB.my -- -- June 1995, Fei Xu -- -- Copyright (c) 1995-2012, 2014 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-STACK-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, TimeTicks, Counter32, Counter64, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, RowStatus, TruthValue, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC fddimibPORTSMTIndex, fddimibPORTIndex FROM FDDI-SMT73-MIB OwnerString, ifName, ifIndex FROM IF-MIB MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF workgroup FROM CISCO-SMI ringStationMacAddress FROM TOKEN-RING-RMON-MIB PhysicalIndex FROM ENTITY-MIB VlanIndex FROM CISCO-VTP-MIB; ciscoStackMIB MODULE-IDENTITY LAST-UPDATED "201403030000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wbu@cisco.com, cs-lan-switch-snmp@cisco.com" DESCRIPTION "This MIB provides configuration and runtime status for chassis, modules, ports, etc. on the Catalyst systems." REVISION "201403030000Z" DESCRIPTION "Modified chassisSysType for new hardwares: 'c6880xle', 'c6807xl', 'c6880x'. Modified chassisComponentType for new hardwares: 'c6880xFan', 'c6807xlFan', 'c6800xl33vcon'. Modified chassisPs1Type and chassisPs2Type to include: 'c6880x3kwac', 'c6880x3kwdc', 'c6800xl3kwac'. Modified moduleType to include new hardwares: 'c6800ia48td', 'c6800ia48fpd', 'c6880x16p10g', 'c6880x', 'c6880xle16p10g', 'c6880xle'. Modified moduleSubType to include new hardwares: 'c6880xpfc', 'c6880xlepfc', 'c6880xdfc', 'c6880xledfc'. Modified portType to include: 'e10GBaseDwdm3347', 'e10GBaseDwdm3740', 'e10GBaseDwdm4135', 'e10GBaseDwdm4532', 'e10GBaseDwdm4932', 'e10GBaseDwdm5333', 'e10GBaseDwdm5736', 'e10GBaseDwdm6141', 'e10GBaseACU7M', 'e10GBaseACU10M', 'e1000BaseEXSMD', 'e1000BaseZXSMD', 'e1000BaseTE', 'e1000BaseSXMMD', 'e1000BaseLHSMD', 'e100BaseFXGE'." REVISION "201206160000Z" DESCRIPTION "Modified moduleType to include: 'c7600Es4Tg3cxl', 'c7600Es2Tg3cxl', 'c76EsXt4Tg3cxl', 'c76EsXt2Tg3cxl', 'c7600Es4Tg3c', 'c7600Es2Tg3c', 'c76EsXt4Tg3c', 'c76EsXt2Tg3c', 'wsSvcWism2k9', 'wsSvcAsaSm1', 'wsSvcNam3k9', 'wsSvcAsaSm1k7', 'wsSvcVse1k9', 'vssup2t10g', 'wsx6148ege45at', 'wsx690810g', 'wsx690440g', 'wsx6148egetx', 'wsx6848tx', 'wsx6848sfp', 'wsx6824sfp', 'wsx681610ge', 'wsx681610t'. Modified moduleSubType to include new hardwares: 'vsf6kpfc4', 'wsf6kdfc4exl', 'c7600Es3cxl', 'c7600Es3c', 'wsf6kdfc4e', 'vsf6kpfc4xl', 'wsf6kdfc4axl', 'wsf6kdfc4a'. Modified moduleSubType2 to include new hardwares: 'aceModExpnDc', 'wsSvcAppProc1', 'c7600Es4Tg', 'c7600Es2Tg', 'c7600EsItu4TgLk', 'c7600EsItu2TgLk', 'vsf6kmsfc5'. Modified portType to include: 'e40GBaseEmpty', 'e10GBaseCU1M', 'e10GBaseCU3M', 'e10GBaseCU5M', 'e10GBaseCU7M', 'e10GBaseCUdot3M', 'e10GBaseCU2M', 'e10GBaseCU4M', 'e10GBaseCU6M', 'e10GBaseUSR', 'e10GBaseLRMSM', 'e1000BaseDwdm3346', 'e1000BaseDwdm3739', 'e1000BaseDwdm4134', 'e1000BaseDwdm4532', 'e1000BaseDwdm4931', 'e1000BaseDwdm5332', 'e1000BaseDwdm5736', 'e1000BaseDwdm6141', 'e40GBaseLR', 'e40GBaseSR', 'e40GBaseUnapproved' Rename 'e10GBaseT' to 'e10GBaseTPluggable'." REVISION "201002010000Z" DESCRIPTION "Modified moduleType to include: 'wsx6708a10ge', 'wsx671610t'." REVISION "200712120000Z" DESCRIPTION "Modified chassisSysType for new hardwares: 'wsc6509ve'. Modified chassisComponentType for new hardwares: 'wsc6509veFan'. Modified chassisPs1Type and chassisPs2Type to include: 'pwr6000dc', 'pwr4500dc'. Modified moduleType to include: 'wssup32pge', 'wssup32p10ge', 'wssvcpisa32', 'wsf6kmsfc2a', 'wsSvcMwam1', 'wsSvcPsd1', 'wsSvcSamiBb', 'vss72010g', 'wsx671610ge'. Modified moduleSubType to include new hardwares: 'vsf6kpfc3cxl', 'vsf6kpfc3c'. Modified moduleSubType2 to include new hardwares: 'vsf6kmsfc3', 'me6524msfc2a', 'wssvcpisa32'. Modified portType to include: 'intrusionProtect', 'e1000BaseSvc', 'e10GBaseSvc', 'e10GBaseLRM', 'e10GBaseT'. Modified syslogMessageFacility to include: 'dom', 'mvrp'. Added ipPermitGroup3." REVISION "200705290000Z" DESCRIPTION "Modified moduleType to include 'wsx6066SlbSk9'." REVISION "200705250000Z" DESCRIPTION "Updated chassisPs1Type and chassisPs2Type to include: 'pwr1500dc'. Modified moduleType to include: 'osm12t3e3', 'osm4GeWanGbicPlus', 'm7600Sip600', 'm7600Sip200', 'm7600Sip400', 'c7600ssc400', 'c7600ssc600', 'esm2x10ge', 'rsp720', 'rsp720base', 'c7600msfc4'. Updated moduleSubType to include new hardwares: 'm7600pfc3c', 'sip600earl', 'c7600esmdfc3cxl', 'c7600esmdfc3c'. Updated moduleSubType2 to include new hardwares: 'esm2x10ge', 'c7600msfc4'." REVISION "200703300000Z" DESCRIPTION "Modified chassisSysType to include: 'mec6524gs8s', 'mec6524gt8s', 'cisco7603s'. Updated chassisPs1Type and chassisPs2Type to include: 'pwr400dc', 'pwr400ac'. Updated chassisComponentType for new hardwares: 'fan6524', 'fanMod6Shs', 'fanMod9Shs', 'fanMod9St', 'fanMod3Hs'. Modified moduleType to include: 'mec6524gs8s', 'mec6524gt8s', 'me6524msfc2a', 'wsx670810ge'. Updated moduleSubType to include new hardwares: 'mec6524pfc3c', 'wsf6700dfc3c', 'wsf6700dfc3cxl'. Modified VendorIdType to compliance with SNMP v2 format" REVISION "200510280000Z" DESCRIPTION "Modified chassisComponentType to include: 'fanMod4Hs'. Modified syslogMessageFacility to include: 'eou', 'backup', 'eoam', 'webauth'. Modified sysErrDisableTimeoutEnable to include: 'ethernetOam', 'gl2ptEoamThresholdExceed'. Updated chassisPs1Type and chassisPs2Type to include: 'pwr2700dc', 'pwr2700ac4', 'pwr2700dc4', and 'wscac8700we'. Modified moduleType to include: 'osm4oc3PosMM', 'wsx6196rj21', 'wssup32ge3b', 'wsSvcIpSec1', 'wsx6148arj45', 'wsSvcWebVpnk9', 'ace106500k9', 'ace046500k9', 'wsSvcAdm1k9', 'wsSvcAgm1k9', 'wssup3210ge3b', 'osm2choc12T3SI', 'wsf6700cfc', 'osm8choc3DS0SI'. Updated portType to include: 'e10GBaseEdc1310', 'e10GBaseSW', 'sslVpn', 'adsm', 'agsm', 'aces', 'e10GBaseZR', 'e100BaseEX', 'e100BaseZX'." REVISION "200504270000Z" DESCRIPTION "Added support of the following objects: cisco7604sysID, wsc6504esysID Modified sysEnableStpxTrap to include: 'enabledForInconOnly', 'enabledForRootOnly', 'enabledForLoopOnly', 'enabledForInconRootOnly', 'enabledForInconLoopOnly', 'enabledForRootLoopOnly' Modified sysErrDisableTimeoutEnable to include: 'camMonitor', 'gl2ptCdpThresholdExceed', 'gl2ptStpThresholdExceed', 'gl2ptVtpThresholdExceed', 'linkRxCrc', 'linkTxCrc', 'linkInErrors', 'packetBufferError' Updated chassisSysType for new hardwares: cisco7604 and wsc6504e Updated chassisPs1Type and chassisPs2Type for new hardwares: wscac6000w and pwr2700ac Updated chassisComponentType for new hardwares: wsc6506eFan, wsc6509eFan, wsc6503eFan, wsc6000vtte. Updated moduleType for hardware: osm2oc48OneDptSSDual, osm2oc48OneDptSIDual, osm2oc48OneDptSLDual, osm4choc12T3MM, osm4choc12T3SI, osm8choc12T3MM, osm8choc12T3SI, osm2choc48T3SS, osm1choc48T3SI, osm2choc48T3SI, osm4choc3DS0SI, osm1choc12T1SI, osm12ct3T1, osm24t3e3, osm2oc12AtmMMPlus, osm2oc12AtmSIPlus, osm8oc3PosSLPlus, wsx6516aGbic, wsx6148getx, wsSvcWlan1k9, wsSvcAon1k9, wsx6148FeSfp, wsx65822pa Updated moduleType for name changed: wsx61821pa changed to wsx61822pa Updated moduleSubType to include new hardwares: wsf6700dfc3a, wsf6kdfc3bxl, wsf6kpfc3bxl, wsf6700dfc3bxl, wsf6700dfc3b, wsf6kdfc3b Updated moduleSubType to include new hardwares: wssvccmm6e1, wssvccmm6t1, wssvccmm24fxs, wssvccmmact Updated portType to include: e10GBaseWdm1550, e10GBaseLW, e10GBaseEW, lwa, aons, e100BaseEmpty, e100BaseUnknown, e100BaseUnapproved, e100BaseSX, e100BaseBX10D, e100BaseBX10U, e1000BaseBX10D, e1000BaseBX10U, e10GBaseBad Updated portType for name changed: posOc48mm changed to posOc48sms Modified ipPermitAccessType, ipPermitDeniedAccess, ipPermitAccessTypeEnable to include: http Modified syslogMessageFacility to include: diags Modified portCpbInlinePower to include: static Deprecated sysEnableStpxTrap, replaced by stpxNotificationEnable in CISCO-STP-EXTENSIONS-MIB.my Deprecated radiusServerTable, replaced by crRadiusServerTable in CISCO-RADIUS-MIB.my Added new conformance Groups: optionalSystemTrapGroup1, authenticationGroup2, systemTrapGroup2, notificationGroup." REVISION "200405140000Z" DESCRIPTION "Modified sysEnableBridgeTraps to include: 'enabledForNewRootOnly' and 'enabledForTopoChangeOnly' Updated moduleType for new hardwares: wsx2948ggetx, wsx2948ggetxgbrj and wsx6748sfp Updated moduleSubType for the new harware: wsf6kpfc3b Updated moduleSubType2 for the new harware: wsf6kVpwrGe Updated portType to include: e10GBaseSR, e10GBaseCX4, e1000BaseUnknown and e10GBaseUnknown, e10GBaseUnapproved, e1000BaseWdmRxOnly, e1000BaseDwdm3033,e1000BaseDwdm3112, e1000BaseDwdm3190,e1000BaseDwdm3268, e1000BaseDwdm3425,e1000BaseDwdm3504, e1000BaseDwdm3582,e1000BaseDwdm3661, e1000BaseDwdm3819,e1000BaseDwdm3898, e1000BaseDwdm3977,e1000BaseDwdm4056, e1000BaseDwdm4214,e1000BaseDwdm4294, e1000BaseDwdm4373,e1000BaseDwdm4453, e1000BaseDwdm4612,e1000BaseDwdm4692, e1000BaseDwdm4772,e1000BaseDwdm4851, e1000BaseDwdm5012,e1000BaseDwdm5092, e1000BaseDwdm5172,e1000BaseDwdm5252, e1000BaseDwdm5413,e1000BaseDwdm5494, e1000BaseDwdm5575,e1000BaseDwdm5655, e1000BaseDwdm5817,e1000BaseDwdm5898, e1000BaseDwdm5979,e1000BaseDwdm6061, e10GBaseWdmRxOnly, e10GBaseDwdm3033, e10GBaseDwdm3112, e10GBaseDwdm3190 e10GBaseDwdm3268, e10GBaseDwdm3425, e10GBaseDwdm3504, e10GBaseDwdm3582, e10GBaseDwdm3661, e10GBaseDwdm3819, e10GBaseDwdm3898, e10GBaseDwdm3977, e10GBaseDwdm4056, e10GBaseDwdm4214, e10GBaseDwdm4294, e10GBaseDwdm4373, e10GBaseDwdm4453, e10GBaseDwdm4612, e10GBaseDwdm4692, e10GBaseDwdm4772, e10GBaseDwdm4851, e10GBaseDwdm5012, e10GBaseDwdm5092, e10GBaseDwdm5172, e10GBaseDwdm5252, e10GBaseDwdm5413, e10GBaseDwdm5494, e10GBaseDwdm5575, e10GBaseDwdm5655, e10GBaseDwdm5817, e10GBaseDwdm5898, e10GBaseDwdm5979 and e10GBaseDwdm6061 Modified portAdminSpeed to include: 'autoDetect10100' Modified syslogMessageFacility to include: 'dhcpsnooping'." REVISION "200401150000Z" DESCRIPTION "Updated workgroup for new hardware: wsc2948ggetxsysID Updated chassisSysType for new hardware: wsc2948ggetx Updated chassisPs1Type for new hardware: w156 Updated moduleType for new hardwares: wsx4148lxmt, wsx4548gbrj45, wsx4548gbrj45v wsx4248rj21v, wsx4302gb, wsx4248rj45v, wsx6748getx, wsx670410ge, wsx6724sfp and wsx6148x2rj45 Updated moduleSubType2 for new hardwares: wsf6kmsfc, wsf6kmsfc2, wsf6kmsfc2a, wsf6kFe48af, wsf6kGe48af and wsf6kFe48x2af, Updated moduleType for new hardwares: e1000BaseUnknown and e10GBaseUnknown. Modified syslogMessageFacility to include 'callhome'. Modified sysErrDisableTimeoutEnable to include 'arpInspectionRate' and 'noStaticInlinePwr'. Modified Description clause for deprecated objects: sysIpAddr, sysNetMask, sysBroadcast, sysReset, sysConsolePrimaryLoginAuthentication, sysConsolePrimaryEnableAuthentication, sysTelnetPrimaryLoginAuthentication, sysTelnetPrimaryEnableAuthentication, sysPortFastBpduGuard, chassisSerialNumber, chassisComponentTable, moduleSerialNumber, moduleHwHiVersion, moduleHwLoVersion, moduleFwHiVersion, moduleFwLoVersion, moduleSwHiVersion, moduleSwLoVersion, portSpantreeFastStart, monitorGrp and vlanSpantreeEnable. Added new conformance Groups: systemMiscGroup1, systemTrapGroup1, optionalSystemMiscGroup6, optionalChassisGroup1, portGroup4, vlanGroup2, ipPermitGroup2 and optionalPortGroup1." REVISION "200305290000Z" DESCRIPTION "Change the ORGANIZATION clause. Deprecated sysClearMacTime object." REVISION "200305050000Z" DESCRIPTION "Add support of the following objects: cisco7613sysID, wsc6509nebasysID. ChassisType: wsc4507, wsc6509NEBA, wsc65509, cisco7613. chassisPs1Type: pwr950dc, pwr1900ac, pwr1900dc, wscac3000w, pwrc451400dcp, wscdc3000w, pwr1400ac. chassisPs2Type: pwr950dc, pwr1900ac, pwr1900dc, wscac3000w, wscdc3000w, pwr1400ac. moduleTable: wsSvcIdsm2, wsSvcFwm1, wsSvcCe1, wssvcSsl1, osm2oc12PosMMPlus, osm2oc12PosSIPlus, osm16oc3PosSIPlus, osm1oc48PosSSPlus,osm1oc48PosSIPlus, osm1oc48PosSLPlus, osm4oc3PosSIPlus, osm8oc3PosSIPlus, osm4oc12PosSIPlus, wsx6548getx, wssup720, wssup720base. moduleSubType: wsf6kpfc2a, wsf6kdfca, vsp300dfc, wsf6kpfc3a, wsf6kdfc3a. moduleSubType2: wsg6489, wsg6485, wsu4502gb, wssvcidsupg, wssup720. portType: e100BaseLX. Deprecate the following objects: sysIpAddr, sysNetMask, sysBroadcast, sysTrapReceiverTable, sysReset, sysClearPortTime, sysClearMacTime, sysPortFastBpduGuard, chassisComponentTable, portSpantreeFastStart, vlanTable, portChannelTable. Remove the TC MacAddressType, and replaced other uses by MacAddress." REVISION "200209240000Z" DESCRIPTION "Added more HW models." REVISION "200106110000Z" DESCRIPTION "Added cat6000 new HW chassis & modules." REVISION "200104110000Z" DESCRIPTION "Added more HW modules; Added the following MIB objects under systemGrp: sysMaxRmonMemory sysMacReductionAdminEnable sysMacReductionOperEnable Added the following MIB object under fileCopyGrp: fileCopyRuntimeConfigPart Added the following MIB object under filterPortTable: filterPortSuppressionOption Added the following MIB object under syslogGrp: syslogTelnetEnable" REVISION "200010100000Z" DESCRIPTION "Added more HW modules; Added the following objects in systemGrp sshPublicKeySize Added the vlanTrunkMappingTable in vlanGrp Added portJumboFrameGrp Added the following objects in portCpbTable: portCpbCosRewrite portCpbTosRewrite portCpbCopsGrouping Added copyTechReportFromRuntimeToHost in fileCopyAction Added ssh(2) in ipPermitAccessType & ipPermitDeniedAccess." REVISION "200005160000Z" DESCRIPTION "Added more HW models; Added the following objects: portInlinePowerDetect vlanPortAuxiliaryVlan portCpbInlinePower portCpbAuxiliaryVlan moduleAdditionalStatus sysExtendedRmonNetflowModuleMask Added the voiceGrp Added the switchAccelerationGrp" REVISION "200002020000Z" DESCRIPTION "Added the following objects: sysPortFastBpduGuard sysErrDisableTimeoutEnable sysErrDisableTimeoutInterval sysTrafficMonitorHighWaterMark chassisPs3Type chassisPs3Status chassisPs3TestResult chassisPEMInstalled moduleEntPhysicalIndex portAdditionalOperStatus portEntPhysicalIndex filterPortBroadcastThresholdFraction mcastEnableRgmp portCpbSpan. modified ipPermitGrp for supporting IP Permit Enhancement. Added more HW models." REVISION "9909300000Z" DESCRIPTION "Added more HW models." REVISION "9903260000Z" DESCRIPTION "Added traceRouteGrp." REVISION "9902120000Z" DESCRIPTION "Initial v2 version of this MIB module." ::= { workgroup 1 } adapterCard OBJECT IDENTIFIER ::= { workgroup 2 } wsc1000sysID OBJECT IDENTIFIER ::= { workgroup 3 } wsc1100sysID OBJECT IDENTIFIER ::= { workgroup 4 } wsc1200sysID OBJECT IDENTIFIER ::= { workgroup 5 } wsc1400sysID OBJECT IDENTIFIER ::= { workgroup 6 } wsc5000sysID OBJECT IDENTIFIER ::= { workgroup 7 } wsc1600sysID OBJECT IDENTIFIER ::= { workgroup 8 } cpw1600sysID OBJECT IDENTIFIER ::= { workgroup 9 } wsc3000sysID OBJECT IDENTIFIER ::= { workgroup 10 } -- rhino OBJECT IDENTIFIER ::= { workgroup 11 } wsc2900sysID OBJECT IDENTIFIER ::= { workgroup 12 } cpw2200sysID OBJECT IDENTIFIER ::= { workgroup 13 } esStack OBJECT IDENTIFIER ::= { workgroup 14 } wsc3200sysID OBJECT IDENTIFIER ::= { workgroup 15 } cpw1900sysID OBJECT IDENTIFIER ::= { workgroup 16 } wsc5500sysID OBJECT IDENTIFIER ::= { workgroup 17 } wsc1900sysID OBJECT IDENTIFIER ::= { workgroup 18 } cpw1220sysID OBJECT IDENTIFIER ::= { workgroup 19 } wsc2820sysID OBJECT IDENTIFIER ::= { workgroup 20 } cpw1420sysID OBJECT IDENTIFIER ::= { workgroup 21 } dcd OBJECT IDENTIFIER ::= { workgroup 22 } wsc3100sysID OBJECT IDENTIFIER ::= { workgroup 23 } cpw1800sysID OBJECT IDENTIFIER ::= { workgroup 24 } cpw1601sysID OBJECT IDENTIFIER ::= { workgroup 25 } wsc3001sysID OBJECT IDENTIFIER ::= { workgroup 26 } cpw1220csysID OBJECT IDENTIFIER ::= { workgroup 27 } wsc1900csysID OBJECT IDENTIFIER ::= { workgroup 28 } wsc5002sysID OBJECT IDENTIFIER ::= { workgroup 29 } cpw1220isysID OBJECT IDENTIFIER ::= { workgroup 30 } wsc1900isysID OBJECT IDENTIFIER ::= { workgroup 31 } tsStack OBJECT IDENTIFIER ::= { workgroup 32 } wsc3900sysID OBJECT IDENTIFIER ::= { workgroup 33 } wsc5505sysID OBJECT IDENTIFIER ::= { workgroup 34 } wsc2926sysID OBJECT IDENTIFIER ::= { workgroup 35 } wsc5509sysID OBJECT IDENTIFIER ::= { workgroup 36 } wsc3920sysID OBJECT IDENTIFIER ::= { workgroup 37 } wsc6006sysID OBJECT IDENTIFIER ::= { workgroup 38 } wsc6009sysID OBJECT IDENTIFIER ::= { workgroup 39 } wsc4003sysID OBJECT IDENTIFIER ::= { workgroup 40 } wsc4912gsysID OBJECT IDENTIFIER ::= { workgroup 41 } wsc2948gsysID OBJECT IDENTIFIER ::= { workgroup 42 } wsc6509sysID OBJECT IDENTIFIER ::= { workgroup 44 } wsc6506sysID OBJECT IDENTIFIER ::= { workgroup 45 } wsc4006sysID OBJECT IDENTIFIER ::= { workgroup 46 } wsc6509nebsysID OBJECT IDENTIFIER ::= { workgroup 47 } wsc6knamsysID OBJECT IDENTIFIER ::= { workgroup 48 } wsc2980gsysID OBJECT IDENTIFIER ::= { workgroup 49 } wsc6513sysID OBJECT IDENTIFIER ::= { workgroup 50 } wsc2980gasysID OBJECT IDENTIFIER ::= { workgroup 51 } cisco7603sysID OBJECT IDENTIFIER ::= { workgroup 53 } cisco7606sysID OBJECT IDENTIFIER ::= { workgroup 54 } cisco7609sysID OBJECT IDENTIFIER ::= { workgroup 55 } wsc6503sysID OBJECT IDENTIFIER ::= { workgroup 56 } wsc4503sysID OBJECT IDENTIFIER ::= { workgroup 58 } wsc4506sysID OBJECT IDENTIFIER ::= { workgroup 59 } cisco7613sysID OBJECT IDENTIFIER ::= { workgroup 60 } wsc6509nebasysID OBJECT IDENTIFIER ::= { workgroup 61 } wsc2948ggetxsysID OBJECT IDENTIFIER ::= { workgroup 62 } cisco7604sysID OBJECT IDENTIFIER ::= { workgroup 63 } wsc6504esysID OBJECT IDENTIFIER ::= { workgroup 64 } wsc1900LiteFxsysID OBJECT IDENTIFIER ::= { workgroup 175 } -- stackMIBobjects systemGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 1 } chassisGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 2 } moduleGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 3 } portGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 4 } tftpGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 5 } brouterGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 6 } filterGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 7 } monitorGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 8 } vlanGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 9 } securityGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 10 } tokenRingGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 11 } multicastGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 12 } dnsGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 13 } syslogGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 14 } ntpGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 15 } tacacsGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 16 } ipPermitListGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 17 } portChannelGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 18 } portCpbGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 19 } portTopNGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 20 } mdgGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 21 } radiusGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 22 } traceRouteGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 24 } fileCopyGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 25 } voiceGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 26 } portJumboFrameGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 27 } switchAccelerationGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 28 } configGrp OBJECT IDENTIFIER ::= { ciscoStackMIB 29 } -- textual conventions -- The vendor ID portion of a MacAddress (first 3 octets -- of the 6-octet MAC address) VendorIdType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Vendor ID Type" SYNTAX OCTET STRING (SIZE (3)) -- the system group -- Implementation of the system group is current for all Cisco Workgroup -- Stack products. sysMgmtType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following snmpV1(2), -- Simple Network Management Protocol smux(3), -- SNMP MUX sub-agent snmpV2V1(4), -- Bi-lingual SNMP, Ver 2 and 1 snmpV2cV1(5),-- Bi-lingual SNMP, V2c and V1 snmpV3V2cV1(6) -- SNMPv3, SNMPv2c and SNMPv1 } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of network management running on this entity." ::= { systemGrp 1 } sysIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This entity's IP address. This object is deprecated and replaced by ciiIPAddressType and ciiIPAddress in CISCO-IP-IF-MIB." ::= { systemGrp 2 } sysNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This entity's subnet mask. This object is deprecated and replaced by ciiIPAddressPrefixLength in CISCO-IP-IF-MIB." ::= { systemGrp 3 } sysBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This entity's broadcast address. This object is deprecated and replaced by ciiIPAddressBroadcast in CISCO-IP-IF-MIB." ::= { systemGrp 4 } -- the trap receiver table sysTrapReceiverTable OBJECT-TYPE SYNTAX SEQUENCE OF SysTrapReceiverEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The trap receiver table (0 to 20 entries). This table lists the addresses of Network Management Stations that should receive trap messages from this entity when an exception condition occurs. This table is deprecated and replaced by trapDestTable and other tables in SNMP-TARGET- MIB and SNMP-NOTIFICATION-MIB." ::= { systemGrp 5 } sysTrapReceiverEntry OBJECT-TYPE SYNTAX SysTrapReceiverEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A trap receiver table entry." INDEX { sysTrapReceiverAddr } ::= { sysTrapReceiverTable 1 } SysTrapReceiverEntry ::= SEQUENCE { sysTrapReceiverType INTEGER, sysTrapReceiverAddr IpAddress, sysTrapReceiverComm DisplayString } sysTrapReceiverType OBJECT-TYPE SYNTAX INTEGER { valid(1), -- add this entry invalid(2) -- remove this entry } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Setting this object to invalid(2) removes the corresponding entry from the sysTrapReceiverTable. To add a new entry to the sysTrapReceiverTable, set this object to valid(1) for an IpAddress which is not already in the table." ::= { sysTrapReceiverEntry 1 } sysTrapReceiverAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "IP address for trap receiver." ::= { sysTrapReceiverEntry 2 } sysTrapReceiverComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Community string used for trap messages to this trap receiver." ::= { sysTrapReceiverEntry 3 } -- the community table -- This table is deprecated and replaced by the sysCommunityRo, -- sysCommunityRw, and sysCommunityRwa objects. New workgroup products -- will not support this table. Older products will continue to support -- this table for some time in order to be backwards compatible with -- existing network management applications. When this table does exist, -- sysCommunityString.2 is the same value as sysCommunityRo, -- sysCommunityString.3 is the same value as sysCommunityRw, and -- sysCommunityString.4 is the same as sysCommunityRwa. sysCommunityTable OBJECT-TYPE SYNTAX SEQUENCE OF SysCommunityEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The community table (4 entries). This table lists community strings and their access levels. When an SNMP message is received by this entity, the community string in the message is compared with this table to determine access rights of the sender. Note that this item is only accessible when using the community string defined in sysCommunityRwa." ::= { systemGrp 6 } sysCommunityEntry OBJECT-TYPE SYNTAX SysCommunityEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A community table entry." INDEX { sysCommunityAccess } ::= { sysCommunityTable 1 } SysCommunityEntry ::= SEQUENCE { sysCommunityAccess INTEGER, sysCommunityString DisplayString } sysCommunityAccess OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following readOnly(2), -- read but not write all -- but restricted items readWrite(3), -- read and write all but -- restricted items readWriteAll(4) -- read and write all } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A value of readWriteAll(4) allows the community to read and write all objects in the MIB. A value of readWrite(3) allows the community to read and write all objects except restricted items such as community strings, which cannot be accessed at all. A value of readOnly(2) allows the community to read all objects except restricted items. A value of other(1) allows no access." ::= { sysCommunityEntry 1 } sysCommunityString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Configurable community string with access rights defined by the value of sysCommunityAccess." ::= { sysCommunityEntry 2 } -- additional system group objects sysAttachType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following dualAttach(2), -- port 1 is A and port 2 is B singleAttach(3),-- port 1 is S and port 2 is M nullAttach(4), -- port 1 is M and port 2 is M dualPrio(5) -- dual attach priority mode } MAX-ACCESS read-write STATUS current DESCRIPTION "The requested concentrator attachment type. For a dual attachment concentrator which can be connected to the trunk ring, the first FDDI port is configured as A and the second FDDI port is configured as B. For a single attachment concentrator which can be connected beneath another concentrator, the first FDDI port is configured as M and the second FDDI port is configured as S. For a null attachment concentrator which can be located at the root of the tree, the first two FDDI ports are configured as M. This object does not take effect until the concentrator is reset. The current attachment type can be determined from snmpFddiPORTPCType for ports 1 and 2." DEFVAL { dualAttach } ::= { systemGrp 7 } sysTraffic OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Traffic meter value, i.e. the percentage of bandwidth utilization for the previous polling interval." ::= { systemGrp 8 } sysReset OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following reset(2), -- resetting the system resetMinDown(3) -- reset in minimal down time } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Writing reset(2) to this object resets the control logic of all modules in the system. Writing resetMinDown(3) to this object resets the system with the minimal system down time. The resetMinDown(3) is only supported in systems with redundant supervisors. This object is deprecated and replaced by csyScheduledReset in CISCO-SYSTEM-MIB." ::= { systemGrp 9 } sysBaudRate OBJECT-TYPE SYNTAX INTEGER { b600(600), b1200(1200), b2400(2400), b4800(4800), b9600(9600), b19200(19200), b38400(38400) } MAX-ACCESS read-write STATUS current DESCRIPTION "The baud rate in bits per second of the RS-232 port." DEFVAL { b9600 } ::= { systemGrp 10 } sysInsertMode OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following standard(2), -- standard insertion scheduled(3), -- scheduled insertion graceful(4) -- graceful insertion } MAX-ACCESS read-write STATUS current DESCRIPTION "The mode for inserting M-ports into the concentrator ring." ::= { systemGrp 11 } sysClearMacTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The time (in hundredths of a second) since mac counters were last cleared. Writing a 0 to this object causes the mac counters to be cleared." ::= { systemGrp 12 } sysClearPortTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The time (in hundredths of a second) since port counters were last cleared. Writing a 0 to this object causes the port counters to be cleared." ::= { systemGrp 13 } -- the FDDI ring map table sysFddiRingTable OBJECT-TYPE SYNTAX SEQUENCE OF SysFddiRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fddi ring map table. This table lists the nodes in the FDDI ring(s) to which the system belongs." ::= { systemGrp 14 } sysFddiRingEntry OBJECT-TYPE SYNTAX SysFddiRingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A FDDI Ring table entry." INDEX { sysFddiRingSMTIndex, sysFddiRingAddress } ::= { sysFddiRingTable 1 } SysFddiRingEntry ::= SEQUENCE { sysFddiRingSMTIndex INTEGER, sysFddiRingAddress MacAddress, sysFddiRingNext MacAddress } sysFddiRingSMTIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the SMT index associated with this ring." ::= { sysFddiRingEntry 1 } sysFddiRingAddress OBJECT-TYPE SYNTAX MacAddress -- OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of this node in the FDDI ring." ::= { sysFddiRingEntry 2 } sysFddiRingNext OBJECT-TYPE SYNTAX MacAddress -- OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of the next node in the FDDI ring." ::= { sysFddiRingEntry 3 } -- additional system group objects sysEnableModem OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the RS-232 port modem control lines are enabled." DEFVAL { disabled } ::= { systemGrp 15 } sysEnableRedirects OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether ICMP redirect messages are sent or received by the system." DEFVAL { enabled } ::= { systemGrp 16 } sysEnableRmon OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the SNMP agent supports the RMON MIB." DEFVAL { enabled } ::= { systemGrp 17 } sysArpAgingTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS current DESCRIPTION "The aging time for the ARP table." DEFVAL { 1200 } ::= { systemGrp 18 } sysTrafficPeak OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Peak traffic meter value since the last time port counters were cleared or the system started (see sysClearPortTime)." ::= { systemGrp 19 } sysTrafficPeakTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the peak traffic meter value occurred." ::= { systemGrp 20 } sysCommunityRwa OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string first. If it matches, read-write access is granted to all items in the MIB. If it doesn't match, the sysCommunityRw string is compared next. Note that this item is only accessible when using the community string defined in sysCommunityRwa." ::= { systemGrp 21 } sysCommunityRw OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string second. If it matches, read-write access is granted to all items in the MIB except restricted items such as community strings. (Restricted items appear empty when read and return a no such name error when an attempt is made to write them.) If it doesn't match, the sysCommunityRo string is compared next. Note that this item is only accessible when using the community string defined in sysCommunityRwa." ::= { systemGrp 22 } sysCommunityRo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "When an SNMP message is received by this entity, the community string in the message is compared with this string third. If it matches, read-only access is granted to all items in the MIB except restricted items such as community strings. (Restricted items appear empty when read.) If it doesn't match, no access is granted, no response is sent back to the SNMP requester, and an SNMP is sent to the SNMP trap receivers if configured. Note that this item is only accessible when using the community string defined in sysCommunityRwa." ::= { systemGrp 23 } sysEnableChassisTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether chassisAlarmOn and chassisAlarmOff traps in this MIB should be generated." DEFVAL { disabled } ::= { systemGrp 24 } sysEnableModuleTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether moduleUp and moduleDown traps in this MIB should be generated." DEFVAL { disabled } ::= { systemGrp 25 } sysEnableBridgeTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForNewRootOnly(3), -- read-only enabledForTopoChangeOnly(4) -- read-only } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether newRoot and topologyChange traps in the BRIDGE-MIB (RFC 1493) should be generated. enabled -- both newRoot and topologyChange traps are enabled. disabled -- both of the newRoot and topologyChange traps are disabled. enabledForNewRootOnly -- only the newRoot trap is enabled. This value is read-only. enabledForTopoChangeOnly -- only the topologyChange trap is enabled. This value is read-only. This object is deprecated and replaced by stpxNotificationEnable in CISCO-STP-EXTENSIONS-MIB." DEFVAL { disabled } ::= { systemGrp 26 } sysIpVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "This entity's IP address Virtual LAN association." DEFVAL { 1 } ::= { systemGrp 27 } sysConfigChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the configuration of the system was last changed." ::= { systemGrp 28 } sysEnableRepeaterTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the traps in the REPEATER-MIB (RFC1516) should be generated." DEFVAL { disabled } ::= { systemGrp 29 } sysBannerMotd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "Message of the day banner which is displayed on the Command Line Interface before log in." ::= { systemGrp 30 } sysEnableIpPermitTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the IP permit traps in this MIB should be generated." DEFVAL { disabled } ::= { systemGrp 31 } -- the system traffic meter table sysTrafficMeterTable OBJECT-TYPE SYNTAX SEQUENCE OF SysTrafficMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system traffic meter table. This table lists the traffic meters available in the system." ::= { systemGrp 32 } sysTrafficMeterEntry OBJECT-TYPE SYNTAX SysTrafficMeterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A traffic meter table entry." INDEX { sysTrafficMeterType} ::= { sysTrafficMeterTable 1 } SysTrafficMeterEntry ::= SEQUENCE { sysTrafficMeterType INTEGER, sysTrafficMeter INTEGER, sysTrafficMeterPeak INTEGER, sysTrafficMeterPeakTime TimeTicks } sysTrafficMeterType OBJECT-TYPE SYNTAX INTEGER { systemSwitchingBus(1), -- system switching bus -- for WS-X5530 supervisor module switchingBusA(2), -- switching bus A switchingBusB(3), -- switching bus B switchingBusC(4) -- switching bus C } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of traffic meter." ::= { sysTrafficMeterEntry 1 } sysTrafficMeter OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Traffic meter value, i.e. the percentage of bandwidth utilization for the previous polling interval." ::= { sysTrafficMeterEntry 2 } sysTrafficMeterPeak OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-only STATUS current DESCRIPTION "Peak traffic meter value since the system started." ::= { sysTrafficMeterEntry 3 } sysTrafficMeterPeakTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the peak traffic meter value occurred." ::= { sysTrafficMeterEntry 4 } sysEnableVmpsTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the vmVmpsChange trap defined in CISCO-VLAN-MEMBERSHIP-MIB should be generated." DEFVAL { disabled } ::= { systemGrp 33} sysConfigChangeInfo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates which NVRAM block is changed by whom." ::= { systemGrp 34 } sysEnableConfigTraps OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether sysConfigChange trap in this MIB should be generated." DEFVAL { disabled } ::= { systemGrp 35 } sysConfigRegister OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of configuration register that will be used by the supervisor module when the system is restarted. This MIB object is only supported in systems with supervisor modules having ROMMON support. The lowest four bits of the configuration register (bits 3,2,1, and 0) form the boot field and the boot field determines whether the system boots from as the following: 0000 -- stay in ROM monitor 0001 -- boot from the first bootable system images on the bootflash 0010 to 1111 -- boot from the first bootable system images specified in the sysBootVariable The bit 5(0x0020) indicates whether the configuration file specified in sysStartupConfigSourceFile will beused recurringly or not whenever the system resets. If this bit is not set, the configuration file(s) specified in sysStartupConfigSourceFile will only be used once and the value of sysStartupConfigSourceFile will be reset to empty string automatically during the next system reset. If the bit 6(0x0040) is set, the system will start with default configuration. The bits 11,12 (0x0800, 0x1000) are used to specify the console line speed in ROM monitor mode as the following: 00 -- 9600 01 -- 1200 10 -- 4800 11 -- 2400 The unspecified bits are not used." DEFVAL { '010f'h } -- "01 0F" ::= { systemGrp 36 } sysBootVariable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "A list of the system boot images in the BOOT environment variable on supervisor modules with ROMMON. The format of sysBootVariable should be: :[],1;{:[],1;...} If the [fileName] is not specified, the first file on the will be used. This MIB object is only supported in systems having supervisor modules with ROMMON." -- DEFVAL { "bootflash:" } ::= { systemGrp 37 } sysBootedImage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the system boot image which the system booted from. This MIB object is only supported in the system with Supervisor module 3 present." ::= { systemGrp 38 } sysEnableEntityTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether entConfigChange trap in the ENTITY-MIB should be generated." DEFVAL { disabled } ::= { systemGrp 39 } sysEnableStpxTrap OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForInconOnly(3), -- read-only enabledForRootOnly(4), -- read-only enabledForLoopOnly(5), -- read-only enabledForInconRootOnly(6), -- read-only enabledForInconLoopOnly(7), -- read-only enabledForRootLoopOnly(8) -- read-only } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate notifications in CISCO-STP-EXTENSIONS-MIB should be generated. enabled -- the stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are all enabled. disabled -- the stpxInconsistencyUpdate, stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are all disabled. enabledForInconOnly -- only the stpxInconsistencyUpdate trap is enabled. This value is read-only. enabledForRootOnly -- only the stpxRootInconsistencyUpdate trap is enabled. This value is read-only. enabledForLoopOnly -- only the stpxLoopInconsistencyUpdate trap is enabled. This value is read-only. enabledForInconRootOnly -- only the stpxInconsistencyUpdate and stpxRootInconsistencyUpdate traps are enabled. This value is read-only. enabledForInconLoopOnly -- only the stpxInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are enabled. This value is read-only. enabledForRootLoopOnly -- only the stpxRootInconsistencyUpdate and stpxLoopInconsistencyUpdate traps are enabled. This value is read-only. This object is deprecated and replaced by stpxNotificationEnable in CISCO-STP-EXTENSIONS-MIB." DEFVAL { disabled } ::= { systemGrp 40 } sysExtendedRmonVlanModeEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Extended RMON VlanMode feature is enabled or not. If it is set to enabled(1), hostTable (rmon 4) will provide the information of a list of VLANs instead of a list of MAC addresses for a monitored trunking port." DEFVAL { disabled } ::= { systemGrp 41 } sysExtendedRmonNetflowPassword OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "The password for enabling the Extended RMON Netflow feature and this object has to be set before setting sysExtendedRmonNetflowEnable to enabled(1). When reading this object, it will return empty string. If the platform supports sysExtendedRmonNetflowModuleMask object, this object will be not be supported." ::= { systemGrp 42 } sysExtendedRmonNetflowEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Extended RMON Netflow feature is enabled or not. Setting this object to disabled(2), will clear sysExtendedRmonNetflowPassword automatically. Setting this object to enabled(1) will be rejected if sysExtendedRmonNetflowPassword does not contain a valid password. If the platform supports sysExtendedRmonNetflowModuleMask object, this object will not be supported." DEFVAL { disabled } ::= { systemGrp 43 } sysExtendedRmonVlanAgentEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Extended RMON VlanAgent feature is enabled or not. If it is set to enabled(1), the extended RMON will also provide the information on VLAN based interface in addition to the port based interface for the monitored traffic. Setting this object to enabled(1), it will consume more CPU for processing each monitored frame and affect Extended RMON performance." DEFVAL { disabled } ::= { systemGrp 44 } sysExtendedRmonEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), noNAMPresent(3) -- No Network Analysis Module -- present } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the SNMP agent supports the extended RMON feature. noNAMPresent(3) is a read-only value and the agent will return this value when the sysEnableExtendedRmon is set to enabled(1), but Network Analysis module is not present in the system." DEFVAL { enabled } ::= { systemGrp 45 } sysConsolePrimaryLoginAuthentication OBJECT-TYPE SYNTAX INTEGER{ tacacs(1), radius(2), local(3) -- read-only } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether TACACS+ or RADIUS is the primary login authentication, i.e which method will be tried first for a console session. If tacacsLoginAuthentication and radiusLoginAuthentication are set to disabled then sysConsolePrimaryLoginAuthentication will have a value of local(3). This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." ::= { systemGrp 46 } sysConsolePrimaryEnableAuthentication OBJECT-TYPE SYNTAX INTEGER{ tacacs(1), radius(2), local(3) -- read-only } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether TACACS+ or RADIUS is the primary enable authentication, i.e which method will be tried first for a console session. If tacacsEnableAuthentication and radiusEnableAuthentication are set to disabled then sysConsolePrimaryEnableAuthentication will have a value of local(3). This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." ::= { systemGrp 47 } sysTelnetPrimaryLoginAuthentication OBJECT-TYPE SYNTAX INTEGER{ tacacs(1), radius(2), local(3) -- read-only } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether TACACS+ or RADIUS is the primary login authentication, i.e which method will be tried first for a telnet session. If tacacsLoginAuthentication and radiusLoginAuthentication are set to disabled then sysTelnetPrimaryLoginAuthentication will have a value of local(3). This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." ::= { systemGrp 48 } sysTelnetPrimaryEnableAuthentication OBJECT-TYPE SYNTAX INTEGER{ tacacs(1), radius(2), local(3) -- read-only } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether TACACS+ or RADIUS is the primary enable authentication, i.e which method will be tried first for a telnet session. If tacacsEnableAuthentication and radiusEnableAuthentication are set to disabled then sysTelnetPrimaryEnableAuthentication will have a value of local(3). This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." ::= { systemGrp 49 } sysStartupConfigSource OBJECT-TYPE SYNTAX INTEGER{ flashFileRecurring(1), flashFileNonRecurring(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the configuration file(s) specified in sysStartupConfigSourceFile will be used recurringly or not whenever the system resets. Setting this object to flashFileNonRecurring(2), the configuration file(s) specified in sysStartupConfigSourceFile will only be used once and the value of sysStartupConfigSourceFile will be reset to empty string automatically during the next system reset. This MIB object is only supported in systems with SupG supervisor models or supervisor models that have flash file system support." ::= { systemGrp 50 } sysStartupConfigSourceFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates which configuration file(s) on the flash device will be used during the next system startup. If the value of this MIB object contains one or multiple valid configuration file(s), then the valid configuration file(s) will reconfigure the system during the next system startup one by one in the order specified. If the value of this MIB object does not contain the valid configuration file(s) on the device, the NVRAM configuration will be used instead. For supervisor models wsx5540 and wsx5550, only 'cfg1' and 'cfg2' are valid file names. For supervisor models with the flash file system support, the valid file name has the format of '[;...]'. This MIB object is only supported in systems with supervisor models wsx5540 and wsx5550 or supervisor models with the flash file system support." ::= { systemGrp 51 } sysConfigSupervisorModuleNo OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the supervisor module (active or standby, if applicable) that the MIB objects sysConfigRegister, sysBootVariable, sysStartupConfigSource, and sysStartupConfigSourceFile are specified for. This MIB object is only supported by the supervisor modules with the flash file system feature support. The default value for this MIB object is set to the active supervisor module number." ::= { systemGrp 52 } sysStandbyPortEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the standby port feature is enabled or not. If this object is set to enabled(1), the uplink ports on the standby supervisor module are activated; otherwise, the uplink ports on the standby supervisor remain inactive." DEFVAL {disabled } ::= { systemGrp 53 } sysPortFastBpduGuard OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether BPDU Guard for Spanning Tree Port Fast Start feature is enabled or not. If the value of this object is set to enabled(1), then when the switch receives a BPDU from a port with the value of portSpantreeFastStart object set to enabled(1), that port is immediately disabled. This object is deprecated and replaced by stpxFastStartBpduGuardEnable in CISCO-STP-EXTENSIONS-MIB." DEFVAL { disabled } ::= { systemGrp 54 } sysErrDisableTimeoutEnable OBJECT-TYPE SYNTAX BITS { other(0), udld(1), duplexMismatch(2), bpduPortGuard(3), channelMisconfig(4), crossBarFallBack(5), gl2ptIngressLoop(6), gl2ptThresholdExceed(7), bcastSuppression(8), arpInspectionRate(9), noStaticInlinePwr(10), camMonitor(11), gl2ptCdpThresholdExceed(12), gl2ptStpThresholdExceed(13), gl2ptVtpThresholdExceed(14), linkRxCrc(15), linkTxCrc(16), linkInErrors(17), packetBufferError(18), ethernetOam(19), gl2ptEoamThresholdExceed(20) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether errdisable timeout feature is enabled for each of the causes or not. The other(0) is for all causes other than: udld(1), duplexMismatch(2), bpduPortGuard(3), channelMisconfig(4), crossBarFallBack(5), (only supported on platforms that support this errdisable reason.) gl2ptIngressLoop(6), (only supported on platforms that support this errdisable reason.) gl2ptThresholdExceed(7), (only supported on platforms that support this errdisable reason.) bcastSuppression(8), (only supported on platforms that support this errdisable reason.) arpInspectionRate(9), (only supported on platforms that support this errdisable reason.) noStaticInlinePwr(10), (only supported on platforms that support this errdisable reason.) camMonitor(11), (only supported on platforms that support this errdisable reason.) gl2ptCdpThresholdExceed(12), (only supported on platforms that support this errdisable reason.) gl2ptStpThresholdExceed(13), (only supported on platforms that support this errdisable reason.) gl2ptVtpThresholdExceed(14), (only supported on platforms that support this errdisable reason.) linkRxCrc(15), (only supported on platforms that support this errdisable reason.) linkTxCrc(16), (only supported on platforms that support this errdisable reason.) linkInErrors(17), (only supported on platforms that support this errdisable reason.) packetBufferError(18), (only supported on platforms that support this errdisable reason.) ethernetOam(19), (only supported on platforms that support this errdisable reason.) gl2ptEoamThresholdExceed(20), (only supported on platforms that support this errdisable reason.) A port is in errdisable state if ifAdminStatus of the port in the ifTable is up(1) while the port is shutdown during runtime by the system due to error detection. If the value of object portAdditionalOperStatus for the port is errdisable(11) then that port is in errdisable state. By setting the bit corresponding to a cause to '1', this errdisable timeout feature is enabled on the system for the ports that are put into errdisable state by that cause, then those ports can be re-enabled automatically during the timeout interval as specified by sysErrDisableTimeoutInterval object after they are put into errdisable state by that cause; otherwise, by setting the bit corresponding to a cause to '0', this errdisable timeout feature is disabled on the system for the ports that are put into errdisable state by that cause, then those ports will remain shutdown until the user re-enable it manually." DEFVAL { { } } ::= { systemGrp 55 } sysErrDisableTimeoutInterval OBJECT-TYPE SYNTAX INTEGER (30..86400) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the timeout interval in seconds for errdisable timeout feature." DEFVAL { 300 } ::= { systemGrp 56 } sysTrafficMonitorHighWaterMark OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the high watermark for the switching bus traffic in percentage. Syslog messages will be generated if the switching bus traffic goes over this object value during the polling interval. Setting this object value to 100 would mean no syslog message would be generated. For systems with 3 switching buses, high watermark and syslog will be for each switching bus." DEFVAL { 100 } ::= { systemGrp 57 } sysHighAvailabilityEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether High System Availability feature is enabled or not. If this feature is enabled, the active supervisor's layer-2 protocol state will be synched to the standby supervisor module, thus maintaining an up-to-date protocol data on the standby supervisor whenever possible. This object is supported in systems with High System Availability feature support." DEFVAL { false } ::= { systemGrp 58 } sysHighAvailabilityVersioningEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether support for supervisor software image versioning (i.e., the capability to run different images on the active and standby supervisors) for the High System Availability feature is enabled or not. This object is supported in systems with High System Availability feature support." DEFVAL { false } ::= { systemGrp 59 } sysHighAvailabilityOperStatus OBJECT-TYPE SYNTAX INTEGER { running(1), notRunning(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the operational status of High System Availability feature. If the value of this object is notRunning(2), then the reason why this feature is actually not running is specified by the object sysHighAvailabilityNotRunningReason. If the value of this object is running(1), then the value of object sysHighAvailabilityOperReason is empty string. This object is supported in systems with High System Availability feature support." ::= { systemGrp 60 } sysHighAvailabilityNotRunningReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the reason why High System Availability feature is not running when the value of sysHighAvailabilityOperStatus is notRunning(2). The value of this object is empty string when the value of sysHighAvailabilityOperStatus is running(1). This object is supported in systems with High System Availability feature support." ::= { systemGrp 61 } sysExtendedRmonNetflowModuleMask OBJECT-TYPE SYNTAX BITS { module1(0), module2(1), module3(2), module4(3), module5(4), module6(5), module7(6), module8(7), module9(8), module10(9), module11(10), module12(11), module13(12), module14(13), module15(14), module16(15) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates Netflow Export Data (NDE) to be sent to which Network Analysis Modules (NAM) in the same chassis. If users set a bit from off to on, the system will check the corresponding module is a NAM or not. If it is not, the system should return error. This mib object will only be supported by the system that can support the multiple NAM modules." ::= { systemGrp 62 } sshPublicKeySize OBJECT-TYPE SYNTAX INTEGER (0 | 512..2048) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates public key size in bits. In write, if a key does not exist, a value between 512 and 2048 will generate a RSA public key with the value as its key size for secured shell access. If a key exists a value other than 0 is valid, indicating a clear key operation. In read, the current key size is returned if a key exists. If not,a 0 is returned." ::= { systemGrp 63 } sysMaxRmonMemory OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the maximum percentage of the memory usage for RMON." ::= { systemGrp 64 } sysMacReductionAdminEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Mac Reduction feature (to reduce the number of MAC addresses used in bridge identifier) is administratively enabled on the device or not." ::= { systemGrp 65 } sysMacReductionOperEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Mac Reduction feature (to reduce the number of MAC addresses used in bridge identifier) is operationaly enabled on the device or not. If the value of this object is true(1), then the accepted values for dot1dStpPriority in BRIDGE-MIB should be multiples of 4096 plus bridge instance ID, such as VlanIndex. Changing this object value might cause the values of dot1dBaseBridgeAddress and dot1dStpPriority in BRIDGE-MIB to be changed also." ::= { systemGrp 66 } sysStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the system." ::= { systemGrp 67 } -- the chassis group -- Implementation of the chassis group is current for all Cisco -- Workgroup Stack products. chassisSysType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following wsc1000(3), -- 2+8 Port CDDI Concentrator wsc1001(4), -- 2+8 Port FDDI Concentrator wsc1100(5), -- 2+16 Port FDDI/CDDI Concentrator wsc5000(6), -- 5 slot Switch wsc2900(7), -- closed 2 slot Switch wsc5500(8), -- 13 slot Switch wsc5002(9), -- 2 slot Switch wsc5505(10), -- 5 slot Switch wsc1200(11), -- 2+8 Port FDDI/Ethernet Switch wsc1400(12), -- 2 slot FDDI/CDDI Concentrator wsc2926(13), -- closed 2 slot Switch wsc5509(14), -- 9 slot Switch wsc6006(15), -- 6 slot Switch wsc6009(16), -- 9 slot Switch wsc4003(17), -- 3 slot Switch wsc5500e(18),-- 13 slot Switch wsc4912g(19), -- closed 2 slot Switch wsc2948g(20), -- closed 2 slot Switch wsc6509(22), -- 9 slot Switch wsc6506(23), -- 6 slot Switch wsc4006(24), -- 6 slot Switch wsc6509NEB(25),-- 9 slot Verticle Chassis Switch wsc2980g(26), -- closed 3 slot Switch wsc6513(27), -- 13 slot Switch wsc2980ga(28), -- closed 3 slot Switch cisco7603(30), -- 3 slot Chassis (Nebula-SP) cisco7606(31), -- 6 slot Chassis (Seaquest-SP) cisco7609(32), -- 9 slot chassis wsc6503(33), -- 3 slot Chassis wsc6509NEBA(34), -- 9 slot Chassis wsc4507(35), -- 7 slot Chassis (Galaxy3) wsc4503(36), -- 3 slot Chassis (Galaxy5) wsc4506(37), -- 6 slot Chassis (Galaxy6) wsc65509(38), -- 9 slot Chassis cisco7613(40), -- 13 slot Chassis wsc2948ggetx(41), -- closed 2 slot Switch cisco7604(42), -- 4 slot Chassis wsc6504e(43), -- 4 slot Chassis mec6524gs8s(45), -- closed 1 slot switch mec6524gt8s(48), -- closed 1 slot switch wsc6509ve(51), -- 9 slot Chassis cisco7603s(52), -- 3 slot Chassis c6880xle(54), -- 5 slot Chassis c6807xl(55), -- 7 slot Chassis c6880x(56) -- 5 slot Chassis } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis system type." ::= { chassisGrp 1 } chassisBkplType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following fddi(2), -- FDDI fddiEthernet(3),-- FDDI and Ethernet giga(4), -- 1.2 Gigabit switch giga3(5), -- 3.6 Gigabit switch giga3E(6), -- 3.6 Gigabit switch -- enhanced giga12(7), -- 12 Gigabit switch giga16(8), -- 16 Gigabit switch giga40(9) -- 40 Gigabit switch } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis backplane type." ::= { chassisGrp 2 } chassisPs1Type OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following none(2), -- no power supply w50(3), -- 50 watt supply w200(4), -- 200 watt supply w600(5), -- 600 watt supply w80(6), -- 80 watt supply w130(7), -- 130 watt supply wsc5008(8), -- 376 watt supply wsc5008a(9), -- 376 watt supply w/PFC w175(10), -- 175 watt supply wsc5068(11), -- 376 watt supply DC wsc5508(12), -- 1100 watt supply wsc5568(13), -- 1200 watt supply DC wsc5508a(14), -- 1200 watt supply w155(15), -- 155 watt supply w175pfc(16), -- 175 watt supply w/PFC w175dc(17), -- 175 watt supply DC wsc5008b(18), -- 376 watt supply -- w/PFC, OCP wsc5008c(19), -- 436 watt supply w/PFC wsc5068b(20), -- 376 watt supply DC -- w/OCP wscac1000(21), -- 1000 watt supply AC wscac1300(22), -- 1300 watt supply AC wscdc1000(23), -- 1000 watt supply DC wscdc1360(24), -- 1360 watt supply DC wsx4008(25), -- 400 watt supply wsc5518(26), -- 805 watt supply AC wsc5598(27), -- 805 watt supply DC w120(28), -- 120 watt externalPS(29), -- external power supply wscac2500w(30), -- 2500 watt supply AC wscdc2500w(31), -- 2500 watt supply DC wsx4008dc(32), -- 400 watt supply DC wscac4000w(33), -- 4000 watt supply AC pwr4000dc(34), -- 4000 watt supply DC pwr950ac(35), -- 950 watt supply AC pwr950dc(36), -- 950 watt supply DC pwr1900ac(37), -- 1900 watt supply AC pwr1900dc(38), -- 1900 watt supply DC pwr1900ac6(39), -- 1900 watt supply -- AC/6 slots wsx4008ac650w(42), -- 650 watt supply AC wsx4008dc650w(43), -- 650 watt supply DC wscac3000w(44), -- 3000 watt supply AC pwrc451000ac(46), -- 1000 watt supply AC pwrc452800acv(47),-- 2800 watt supply AC pwrc451300acv(48),-- 1300 watt supply AC pwrc451400dcp(49),-- 1400 watt supply DC wscdc3000w(50), -- 3000 watt supply DC pwr1400ac(51), -- 1400 watt supply AC w156(52), -- 156 watt supply AC wscac6000w(53), -- 6000 watt supply AC pwr2700ac(54), -- 2700 watt supply AC pwr2700dc(55), -- 2700 watt supply DC wscac8700we(58), -- 8700 watt supply AC pwr2700ac4(59), -- 2700 watt supply AC pwr2700dc4(60), -- 2700 watt supply DC pwr400dc(63), -- 400 watt supply DC pwr400ac(64), -- 400 watt supply AC pwr6000dc(105), -- 6000 watt supply DC pwr1500dc(106), -- 1500 watt supply DC c6880x3kwac(150), -- 3000 watt supply AC c6880x3kwdc(151), -- 3000 watt supply DC c6800xl3kwac(152) -- 3000 watt supply AC } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power supply number 1." ::= { chassisGrp 3 } chassisPs1Status OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of power supply number 1. If the status is not ok, the value of chassisPs1TestResult gives more detailed information about the power supply's failure condition(s)." ::= { chassisGrp 4 } chassisPs1TestResult OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Test result for power supply number 1. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions." ::= { chassisGrp 5 } chassisPs2Type OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following none(2), -- no power supply w50(3), -- 50 watt supply w200(4), -- 200 watt supply w600(5), -- 600 watt supply w80(6), -- 80 watt supply w130(7), -- 130 watt supply wsc5008(8), -- 376 watt supply wsc5008a(9), -- 376 watt supply w/PFC w175(10), -- 175 watt supply wsc5068(11), -- 376 watt supply DC wsc5508(12), -- 1100 watt supply wsc5568(13), -- 1200 watt supply DC wsc5508a(14), -- 1200 watt supply w155(15), -- 155 watt supply w175pfc(16), -- 175 watt supply w/PFC w175dc(17), -- 175 watt supply DC wsc5008b(18), -- 376 watt supply -- w/PFC, OCP wsc5008c(19), -- 436 watt supply w/PFC wsc5068b(20), -- 376 watt supply DC -- w/OCP wscac1000(21), -- 1000 watt supply AC wscac1300(22), -- 1300 watt supply AC wscdc1000(23), -- 1000 watt supply DC wscdc1360(24), -- 1360 watt supply DC wsx4008(25), -- 400 watt supply wsc5518(26), -- 805 watt supply AC wsc5598(27), -- 805 watt supply DC w120(28), -- 120 watt externalPS(29), -- external power supply wscac2500w(30), -- 2500 watt supply AC wscdc2500w(31), -- 2500 watt supply DC wsx4008dc(32), -- 400 watt supply DC wscac4000w(33), -- 4000 watt supply AC pwr4000dc(34), -- 4000 watt supply DC pwr950ac(35), -- 950 watt supply AC pwr950dc(36), -- 950 watt supply DC pwr1900ac(37), -- 1900 watt supply AC pwr1900dc(38), -- 1900 watt supply DC pwr1900ac6(39), -- 1900 watt supply -- AC/6 slots wsx4008ac650w(42), -- 650 watt supply AC wsx4008dc650w(43), -- 650 watt supply DC wscac3000w(44), -- 3000 watt supply AC pwrc451000ac(46), -- 1000 watt supply AC pwrc452800acv(47),-- 2800 watt supply AC pwrc451300acv(48),-- 1300 watt supply AC pwrc451400dcp(49),-- 1400 watt supply DC wscdc3000w(50), -- 3000 watt supply DC pwr1400ac(51), -- 1400 watt supply AC w156(52), -- 156 watt supply AC wscac6000w(53), -- 6000 watt supply AC pwr2700ac(54), -- 2700 watt supply AC pwr2700dc(55), -- 2700 watt supply DC wscac8700we(58), -- 8700 watt supply AC pwr2700ac4(59), -- 2700 watt supply AC pwr2700dc4(60), -- 2700 watt supply DC pwr400dc(63), -- 400 watt supply DC pwr400ac(64), -- 400 watt supply AC pwr6000dc(105), -- 6000 watt supply DC pwr1500dc(106), -- 1500 watt supply DC c6880x3kwac(150), -- 3000 watt supply AC c6880x3kwdc(151), -- 3000 watt supply DC c6800xl3kwac(152) -- 3000 watt supply AC } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power supply number 2." ::= { chassisGrp 6 } chassisPs2Status OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of power supply number 2. If the status is not ok, the value of chassisPs2TestResult gives more detailed information about the power supply's failure condition(s)." ::= { chassisGrp 7 } chassisPs2TestResult OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Test result for power supply number 2. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions." ::= { chassisGrp 8 } chassisFanStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of the chassis fan. If the status is not ok, the value of chassisFanTestResult gives more detailed information about the fan's failure condition(s)." ::= { chassisGrp 9 } chassisFanTestResult OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Test result for the chassis fan. A zero indicates that the fan passed all tests. Bits set in the result indicate error conditions." ::= { chassisGrp 10 } chassisMinorAlarm OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis minor alarm status." ::= { chassisGrp 11 } chassisMajorAlarm OBJECT-TYPE SYNTAX INTEGER { off(1), on(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis major alarm status." ::= { chassisGrp 12 } chassisTempAlarm OBJECT-TYPE SYNTAX INTEGER { off(1), -- temperature within normal -- range on(2), -- temperature too high critical(3) -- critical temperature, -- system shut down imminent } MAX-ACCESS read-only STATUS current DESCRIPTION "The chassis temperature alarm status." ::= { chassisGrp 13 } chassisNumSlots OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of slots in the chassis available for plug-in modules." ::= { chassisGrp 14 } chassisSlotConfig OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of which slots in the chassis have modules inserted. This is an integer value with bits set to indicate configured modules. It can be interpreted as a sum of f(x) as x goes from 1 to the number of slots, where f(x) = 0 for no module inserted and f(x) = exp(2, x-1) for a module inserted." ::= { chassisGrp 15 } chassisModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer's model number for the chassis." ::= { chassisGrp 16 } chassisSerialNumber OBJECT-TYPE SYNTAX INTEGER (0..999999999) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the chassis in a numeric format. If the chassis uses an alphanumeric serial number, this MIB object will return 0. This object is deprecated and replaced by entPhysicalSerialNum in ENTITY-MIB." ::= { chassisGrp 17 } -- chassis component table chassisComponentTable OBJECT-TYPE SYNTAX SEQUENCE OF ChassisComponentEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of the chassis related components in the chassis. This table is deprecated and replaced by entPhysicalTable in ENTITY-MIB." ::= { chassisGrp 18 } chassisComponentEntry OBJECT-TYPE SYNTAX ChassisComponentEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entry containing information about one component in the chassis." INDEX { chassisComponentIndex } ::= { chassisComponentTable 1 } ChassisComponentEntry ::= SEQUENCE { chassisComponentIndex INTEGER, chassisComponentType INTEGER, chassisComponentSerialNumber DisplayString, chassisComponentHwVersion DisplayString, chassisComponentModel DisplayString } chassisComponentIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "A unique value for each chassis related component within the chassis." ::= { chassisComponentEntry 1 } chassisComponentType OBJECT-TYPE SYNTAX INTEGER { unknown(1), -- unknown chassis component wsc6000cl(2), -- clock module for cat6000 wsc6000vtt(3), -- VTT module for cat6000 wsc6000tempSensor(4), -- Temp Sensor for cat6000 wsc6513Clock(5), -- clock for WS-C6513 clk7600(6), -- clock module for cisco7600 ws9SlotFan(7), -- Catalyst 6000 Fan Tray for -- 9-Slot Systems fanMod9(8), -- Cisco 7609 and Catalyst -- 6509-NEB-A Fan Tray wsc6506eFan(10), -- Catalyst 6506 E FAN Tray wsc6509eFan(11), -- Catalyst 6509 E FAN Tray wsc6503eFan(13), -- Catalyst 6503 E FAN Tray wsc6000vtte(14), -- VTT module for cat6000 E fanMod4Hs(15), -- Fan module for cisco7604 -- and WS-C6504 fan6524(16), -- Catalyst 6524 Series FAN Tray fanMod6Shs(17), -- 6-slot FAN for CISCO7606-S fanMod9Shs(18), -- 9-slot FAN for CISCO7609-S fanMod9St(19), -- 9-slot FAN for CISCO7609-S wsc6509veFan(20),-- Fan Tray for WS-C6509-V-E fanMod3Hs(21), -- Fan Tray for CISCO7603-S c6880xFan(25), -- Fan Tray for C6880-X c6807xlFan(26), -- Fan Tray for C6807-XL c6800xl33vcon(27) -- PS Converter for C6807-XL } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The type of the chassis component." ::= { chassisComponentEntry 2 } chassisComponentSerialNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0 .. 20)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the chassis component." ::= { chassisComponentEntry 3 } chassisComponentHwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0 .. 20)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The hardware version of the chassis component." ::= { chassisComponentEntry 4 } chassisComponentModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0 .. 20)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The manufacturer's model number for the chassis component." ::= { chassisComponentEntry 5 } chassisSerialNumberString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the chassis. This MIB object will return the chassis serial number for any chassis that either a numeric or an alphanumeric serial number is being used." ::= { chassisGrp 19 } chassisPs3Type OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following none(2), -- no power supply wsx4008(25), -- 400 watt supply wsx4008dc(32), -- 400 watt supply DC wsx4008ac650w(42), -- 650 watt supply AC wsx4008dc650w(43) -- 650 watt supply DC } MAX-ACCESS read-only STATUS current DESCRIPTION "Type of power supply number 3. This object is only supported by systems that can have 3 or more power supplies." ::= { chassisGrp 20 } chassisPs3Status OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "Status of power supply number 3. If the status is not ok, the value of chassisPs3TestResult gives more detailed information about the power supply's failure condition(s). This object is only supported by systems that can have 3 or more power supplies." ::= { chassisGrp 21 } chassisPs3TestResult OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Test result for power supply number 3. A zero indicates that the supply passed all tests. Bits set in the result indicate error conditions. This object is only supported by systems that can have 3 or more power supplies." ::= { chassisGrp 22 } chassisPEMInstalled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether Power Entry Module is installed into the Chassis or not. Power Entry Module is a connection into the system for an external power supply of -48 Volts. This object is only supported by systems that can have 3 or more power supplies." ::= { chassisGrp 23 } -- the module group moduleTable OBJECT-TYPE SYNTAX SEQUENCE OF ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of module entries. The number of entries is the number of modules in the chassis." ::= { moduleGrp 1 } moduleEntry OBJECT-TYPE SYNTAX ModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information about one module in the chassis." INDEX { moduleIndex } ::= { moduleTable 1 } ModuleEntry ::= SEQUENCE { moduleIndex INTEGER, moduleType INTEGER, moduleSerialNumber INTEGER, moduleHwHiVersion INTEGER, moduleHwLoVersion INTEGER, moduleFwHiVersion INTEGER, moduleFwLoVersion INTEGER, moduleSwHiVersion INTEGER, moduleSwLoVersion INTEGER, moduleStatus INTEGER, moduleTestResult INTEGER, moduleAction INTEGER, moduleName DisplayString, moduleNumPorts INTEGER, modulePortStatus OCTET STRING, moduleSubType INTEGER, moduleModel DisplayString, moduleHwVersion DisplayString, moduleFwVersion DisplayString, moduleSwVersion DisplayString, moduleStandbyStatus INTEGER, moduleIPAddress IpAddress, moduleIPAddressVlan VlanIndex, moduleSubType2 INTEGER, moduleSlotNum INTEGER, moduleSerialNumberString DisplayString, moduleEntPhysicalIndex PhysicalIndex, moduleAdditionalStatus BITS } moduleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value for each module within the chassis." ::= { moduleEntry 1 } moduleType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following empty(2), -- nothing installed wsc1000(3), -- 2+8 Port CDDI Concentrator wsc1001(4), -- 2+8 Port FDDI Concentrator wsc1100(5), -- 2+16 Port FDDI/CDDI Concentrator wsc1200(11), -- 2+8 Port FDDI/Ethernet Switch wsc1400(12), -- 2 slot FDDI/CDDI Concentrator -- the following modules are for the WS-C1400 wsx1441(13), -- 8 port Multi Mode FDDI (MIC connector) wsx1444(14), -- 8 port Single Mode FDDI (ST connector) wsx1450(15), -- 2 port MM FDDI (MIC), 12 port -- CDDI(RJ-45) wsx1483(16), -- 16 port CDDI (RJ-45 connector) wsx1454(17), -- 2 port SM FDDI (ST), 12 port CDDI -- (RJ-45) wsx1455(18), -- 10 port MM FDDI (SC connector) wsx1431(19), -- 4 port Multi Mode FDDI (MIC connector) wsx1465(20), -- 2 port MM FDDI (SC), 12 port CDDI -- (RJ-45) wsx1436(21), -- 4 port SM FDDI (ST), 4 port MM FDDI -- (MIC) wsx1434(22), -- 4 port Single Mode FDDI (ST connector) -- the following modules are for the WSC-5000 series wsx5009(23), -- Supervisor Module 1, 2 100 BaseTX -- (RJ-45/MII) wsx5013(24), -- 24 port 10BaseT (RJ-45 connector) wsx5011(25), -- 12 port 10BaseFL MultiMode (ST -- connector) wsx5010(26), -- 24 port 10BaseT (Telco connector) wsx5113(27), -- 12 port 100BaseTX (RJ-45 connector) wsx5101(28), -- 1 dual attach Multi Mode FDDI -- (MIC connector) wsx5103(29), -- 1 dual attach CDDI (RJ-45 connector) wsx5104(30), -- 1 dual attach Single Mode FDDI (ST -- connector) wsx5155(32), -- 1 port Multi Mode OC-3 ATM (SC -- connector) wsx5154(33), -- 1 port Single Mode OC-3 ATM (SC -- connector) wsx5153(34), -- 1 port UTP OC-3 ATM (RJ-45 connector) wsx5111(35), -- 12 port 100BaseFX Multi Mode (SC -- connector) wsx5213(36), -- 12 port 10/100BaseTX (RJ-45 connector) wsx5020(37), -- 48 port 4 segment 10BaseT (Telco -- connector) wsx5006(38), -- Supervisor Mod 1, 2 100BaseFX Multi Mode -- (SC) wsx5005(39), -- Supervisor Mod 1, 2 100BaseFX Single -- Mode (SC) wsx5509(40), -- Supervisor Mod 2, 2 100BaseTX -- (RJ-45/MII) wsx5506(41), -- Supervisor Mod 2, 2 100BaseFX Multi Mode -- (SC) wsx5505(42), -- Supervisor Mod 2, 2 100BaseFX Single -- Mode (SC) wsx5156(43), -- 1 dual phy UTP OC-3 ATM (RJ-45 -- connector) wsx5157(44), -- 1 dual phy Single Mode OC-3 ATM (SC -- connector) wsx5158(45), -- 1 dual phy Multi Mode OC-3 ATM (SC -- connector) wsx5030(46), -- 16 port Token Ring (RJ-45 connector) wsx5114(47), -- 6 port SM, 6 port MM 100BaseFX (SC -- connector) wsx5223(48), -- 24 port 3 segment 100BaseTX (RJ-45 -- connector) wsx5224(49), -- 24 port 10/100BaseTX (RJ-45 connector) wsx5012(50), -- 48 port 10BaseT (Telco connector) wsx5302(52), -- Vlan router wsx5213a(53), -- 12 port 10/100BaseTX (RJ-45 connector) wsx5380(54), -- Network Analysis Module wsx5201(55), -- 12 port 100BaseFX Multi Mode (SC -- connector) wsx5203(56), -- 12 port 10/100BaseTX (RJ-45 connector) wsx5530(57), -- Supervisor Module 3 wsx5161(61), -- 1 dual phy Multi Mode OC-12 ATM (SC -- connector) wsx5162(62), -- 1 dual phy Single Mode OC-12 ATM (SC -- connector) wsx5165(65), -- ATM bridge wsx5166(66), -- 1 dual phy DS3 ATM (BNC connector) wsx5031(67), -- 16 port Multi Mode Token Ring (ST -- connector) wsx5410(68), -- 9 port 1000BaseX (GBIC connector) wsx5403(69), -- 3 port 1000BaseX (GBIC connector) wsx5201r(73), -- 12 port 100BaseFX Multi Mode (SC --connector) wsx5225r(74), -- 24 port 10/100BaseTX (RJ-45 connector) wsx5014(75), -- 48 port 10BaseT (RJ-45 connector) wsx5015(76), -- 24 port 10BaseFL (MT-RJ connector) wsx5236(77), -- 24 port 100BaseFX Multi Mode (MT-RJ -- connector) wsx5540(78), -- Supervisor Module 2 GS wsx5234(79), -- 24 port 10/100BaseTX (RJ-45 connector) wsx5012a(81), -- 48 port 10BaseT (Telco connector) wsx5167(82), -- 1 dual phy Multi Mode OC-3 ATM (SC -- connector) wsx5239(83), -- 36 port 10/100BaseTX (Telco connector) wsx5168(84), -- 1 dual phy Single Mode OC-3 ATM (SC -- connector) wsx5305(85), -- 8 port 100BaseFX MM (SC)/Ethernet bridge wsx5550(87), -- Supervisor Module 3 GS, 2 port GBIC wsf5541(88), -- RSFC for wsx5540, wsx5550 wsx5534(91), -- Supervisor Module 3 FSX wsx5536(92), -- Supervisor Module 3 FLX wsx5237(96), -- 24 port 100BaseFX Single Mode (MT-RJ -- connector) -- the following modules are for the WSC-6000 series wsx6ksup12ge(200), -- 2 port 1000BaseX Supervisor Mod -- (GBIC) wsx6408gbic(201), -- 8 port 1000BaseX (GBIC) wsx6224mmmt(202), -- 24 port 100BaseFX MM (MT-RJ) wsx6248rj45(203), -- 48 port 10/100BaseTX (RJ-45) wsx6248tel(204), -- 48 port 10/100BaseTX (Telco) wsx6302msm(206), -- Multilayer switch module wsf6kmsfc(207), -- Multilayer switch feature card wsx6024flmt(208), -- 24 port 10BaseFL (MT-RJ) wsx6101oc12mmf(209),-- 1 port Multi Mode OC-12 ATM (SC) wsx6101oc12smf(210),-- 1 port Single Mode OC-12 ATM (SC) wsx6416gemt(211), -- 16 port 1000BaseSX (MT-RJ) wsx61822pa(212), -- 2 port adapter FlexWAN Module osm2oc12AtmMM(213),-- 2-port OC-12 ATM MM osm2oc12AtmSI(214),-- 2-port OC-12 ATM SI osm4oc12PosMM(216),-- 4-port OC-12c POS MM osm4oc12PosSI(217),-- 4-port OC-12c POS SI osm4oc12PosSL(218),-- 4-port OC-12c POS SL wsx6ksup1a2ge(219),-- 2 port 1000BaseX Supervisor Mod -- (GBIC) wsx6302amsm(220), -- Multilayer switch module (Rev. A) wsx6416gbic(221), -- 16 port 1000BaseX (GBIC) wsx6224ammmt(222), -- 24 port 100BaseFX MM (MT-RJ), -- Enhanced QoS wsx6380nam(223), -- Network Analysis Module wsx6248arj45(224), -- 48 port 10/100BaseTX (RJ-45) -- Enhanced QoS wsx6248atel(225), -- 48 port 10/100BaseTX (Telco) -- Enhanced QoS wsx6408agbic(226), -- 8 port 1000BaseX (GBIC),Enhanced -- QoS wsx6608t1(229), -- 8 port T1 (1.544 Mps) wsx6608e1(230), -- 8 port E1 (2.048 Mps) wsx6624fxs(231), -- 24 port FXS Analog station module wsx6316getx(233), -- 16 port 1000BaseT (RJ-45) wsf6kmsfc2(234), -- Multilayer switch feature card II wsx6324mmmt(235), -- 24 port 100BaseFX MM (MT-RJ) wsx6348rj45(236), -- 48 port 10/100BaseTX (RJ-45) wsx6ksup22ge(237), -- 2 port 1000BaseX Supervisor Mod 2 -- (GBIC) wsx6324sm(238), -- 24 port 100BaseFX SM (MT-RJ) wsx6516gbic(239), -- 16 port 1000BaseX (GBIC) osm4geWanGbic(240), -- 4 port 1000BaseX (GBIC) osm1oc48PosSS(241), -- 1 port OC-48 POS SS osm1oc48PosSI(242), -- 1 port OC-48 POS SI osm1oc48PosSL(243), -- 1 port OC-48 POS SL wsx6381ids(244), -- Intrusion Detection module wsc6500sfm(245), -- Switch Fabric Module osm16oc3PosMM(246), -- 16 port OC3 POS MM osm16oc3PosSI(247), -- 16 port OC3 POS SI osm16oc3PosSL(248), -- 16 port OC3 POS SL osm2oc12PosMM(249), -- 2 port OC12 POS MM osm2oc12PosSI(250), -- 2 port OC12 POS SI osm2oc12PosSL(251), -- 2 port OC12 POS SL wsx650210ge(252), -- 1 port 10 Gigabit Ethernet osm8oc3PosMM(253), -- 8 port OC3 POS MM osm8oc3PosSI(254), -- 8 port OC3 POS SI osm8oc3PosSL(255), -- 8 port OC3 POS SL wsx6548rj45(258), -- 48 port 10/100BaseTX (RJ-45) wsx6524mmmt(259), -- 24 port 100BaseFX MM (MT-RJ) wsx6066SlbApc(260), -- SLB Application Processor Complex wsx6516getx(261), -- 16 port 10/100/1000BaseT (RJ-45) osm2oc48OneDptSS(265), -- 2 port OC48 1 DPT SS osm2oc48OneDptSI(266), -- 2 port OC48 1 DPT SI osm2oc48OneDptSL(267), -- 2 port OC48 1 DPT SL osm2oc48OneDptSSDual(268), -- 2 port OC48 DPT SS -- dual-natured osm2oc48OneDptSIDual(269), -- 2 port OC48 DPT SI -- dual-natured osm2oc48OneDptSLDual(270), -- 2 port OC48 DPT SL -- dual-natured wsx6816gbic(271), -- 16 port 1000BaseX (Layer 3) osm4choc12T3MM(272), -- 4 port OC-12 Multimode osm4choc12T3SI(273), -- 4 port OC-12 Singlemode -- Intermediate osm8choc12T3MM(274), -- 8 port OC-12 Multimode osm8choc12T3SI(275), -- 8 port OC-12 Singlemode -- Intermediate osm1choc48T3SS(276), -- 1 port OC-48 Singlemode Short osm2choc48T3SS(277), -- 2 port OC-48 Singlemode Short wsx6500sfm2(278), -- Switch Fabric Module 136 osm1choc48T3SI(279), -- 1 port OC-48 Singlemode -- Intermediate osm2choc48T3SI(280), -- 2 port OC-48 Singlemode -- Intermediate wsx6348rj21(281), -- 48 port 10/100BaseTX (RJ-21) wsx6548rj21(282), -- 48 port 10/100BaseTX (RJ-21) wsSvcCmm(284), -- AVVID Services Module wsx650110gex4(285), -- 1 port 10 Gigabit Ethernet (EX4) osm4oc3PosSI(286), -- 4 port OC3 POS SI osm4oc3PosMM(289), -- 4 port OC3 POS MM wsSvcIdsm2(290), -- Intrusion Detection module wsSvcNam2(291), -- Network Analysis Module wsSvcFwm1(292), -- Firewall Module wsSvcCe1(293), -- Web Cache/Content Engine Module wsSvcSsl1(294), -- SSL Module osm8choc3DS0SI(295), -- 8 port OC3 DS0 SI osm4choc3DS0SI(296), -- 4 port OC3 DS0 SI osm1choc12T1SI(297), -- 1 port OC3 T1 SI -- the following modules are for the WSC-4000 series wsx4012(300), -- Supervisor Module wsx4148rj(301), -- 48 port 10/100BaseTX (RJ-45) wsx4232gbrj(302), -- 2 1000X (GBIC), 32 10/100BaseTX -- (RJ-45) wsx4306gb(303), -- 6 port 1000BaseX (GBIC) wsx4418gb(304), -- 18 port 1000BaseX (GBIC) wsx44162gbtx(305), -- 2 1000BaseX (GBIC), 16 1000BaseT -- (RJ-45) wsx4912gb(306), -- 12 port 1000BaseX (GBIC) wsx2948gbrj(307), -- 2 1000X (GBIC), 48 10/100BaseTX -- (RJ-45) wsx2948(309), -- Supervisor Module wsx4912(310), -- Supervisor Module wsx4424sxmt(311), -- 24 port 1000BaseSX (MT-RJ) wsx4232rjxx(312), -- 32 port 10/100 (RJ-45) + uplink -- submodule wsx4148rj21(313), -- 48 port 10/100BaseTX (RJ-21) wsx4124fxmt(317), -- 24 port 100BaseFX MM (MT-RJ) wsx4013(318), -- Supervisor Module 2, 2 port -- 1000X(GBIC) wsx4232l3(319), -- 32 10/100TX(RJ-45), 2 1000X -- Routed port wsx4604gwy(320), -- 1 port 1000 Mb routed + 1 daughter -- card wsx44122Gbtx(321), -- 2 1000BaseX(GBIC), 12 1000BaseT -- (RJ-45) wsx2980(322), -- Supervisor module for wsc2980g wsx2980rj(323), -- 48 port 10/100BaseTX wsx2980gbrj(324), -- 32 port 10/100BaseTX + 2 port -- 1000X wsx4019(325), -- Switch Fabric Module wsx4148rj45v(326), -- 48 port 10/100BaseT Voice Power -- module wsx4424gbrj45(330),-- 24 10/100/1000BaseTX (RJ-45) wsx4148fxmt(331), -- 48 port 100BaseFX MM (MT-RJ) wsx4448gblx(332), -- 48 port 1000BaseX (SFP GBIC) wsx4448gbrj45(334), -- 48 port 10/100/1000Base TX -- (RJ-45) wsx4148lxmt(337), -- 48 port 100BaseLX wsx4548gbrj45(339), -- 48 port 10/100/1000Base TX -- (RJ-45) wsx4548gbrj45v(340), -- 48 port 10/100/1000T Voice -- module wsx4248rj21v(341), -- 48 port 10/100 (RJ-21) Voice -- module wsx4302gb(342), -- 2 port 1000BaseX (GBIC) wsx4248rj45v(343), -- 48 port 10/100BaseT Voice Power -- module wsx2948ggetx(345), -- Supervisor Module for -- wsc2948ggetx wsx2948ggetxgbrj(346), -- 4 1000Base FX(SFP), 48 -- 10/100/1000 BaseTX (RJ-45) -- the following modules are for the WSC-6000 series wsx6516aGbic(502), -- 16 port 1000BaseX (GBIC) wsx6148getx(503), -- 48 port 10/100/1000BaseT(RJ-45) wsx6148x2rj45(506), -- 96 port 10/100BaseTX (RJ-45) wsx6196rj21(507), -- 96 port 10/100BaseTX (RJ-21) wssup32ge3b(509), -- 8 port 1000BaseX Supervisor -- module wssup3210ge3b(510), -- 2 port 10GBaseX Supervisor -- module mec6524gs8s(511), -- 24 port SFP with 8 SFP uplinks mec6524gt8s(512), -- 24 port 10/100/1000BaseT with -- 8 SFP uplinks wssup32pge(515), -- 8 port 1000BaseX Supervisor -- module PISA wssup32p10ge(516), -- 2 port 10GBaseX Supervisor -- module PISA wssvcpisa32(597), -- PISA card (Multilayer switch & -- service feature card) -- (moduleSubType2) me6524msfc2a(598), -- Multilayer switch feature card -- II A wsf6kmsfc2a(599), -- Multilayer switch feature card -- II A -- WAN module for c6k and 76xx osm12ct3T1(600), -- 12 port CT3 T1 osm12t3e3(601), -- 12 port T3 E3 osm24t3e3(602), -- 24 port T3 E3 osm4GeWanGbicPlus(603), -- 4 GE WAN ports and 2 GE LAN ports osm1choc12T3SI(604), -- 1 port OC-12 Singlemode -- Intermediate osm2choc12T3SI(605), -- 2 port OC-12 Singlemode -- Intermediate osm2oc12AtmMMPlus(606), -- 2-port OC-12 ATM MM osm2oc12AtmSIPlus(607), -- 2-port OC-12 ATM SI osm2oc12PosMMPlus(608), -- 2 port OC12 POS MM osm2oc12PosSIPlus(609), -- 2 port OC12 POS SI osm16oc3PosSIPlus(610), -- 16 port OC3 POS SI osm1oc48PosSSPlus(611), -- 1 port OC-48 POS SS osm1oc48PosSIPlus(612), -- 1 port OC-48 POS SI osm1oc48PosSLPlus(613), -- 1 port OC-48 POS SL osm4oc3PosSIPlus(614), -- 4 port OC3 POS SI osm8oc3PosSLPlus(615), -- 8 port OC3 POS SL osm8oc3PosSIPlus(616), -- 8 port OC3 POS SI osm4oc12PosSIPlus(617), -- 4 port OC12 POS SI c7600Es4Tg3cxl(618), -- 4x10GE with Pluggable optics -- 3C XL c7600Es2Tg3cxl(620), -- 2x10GE with Pluggable optics -- 3C XL c76EsXt4Tg3cxl(625), -- 4x10G ITU 3C XL c76EsXt2Tg3cxl(626), -- 2x10GE ITU 3C XL c7600Es4Tg3c(627), -- 4x10GE with Pluggable optics -- 3C c7600Es2Tg3c(629), -- 2x10GE with Pluggable optics -- 3C c76EsXt4Tg3c(633), -- 4x10G ITU 3C c76EsXt2Tg3c(634), -- 2x10GE ITU 3C wsSvcIpSec1(903), -- VPN security blade module wsSvcMwam1(910), -- Mobile Wireless Application -- Module wsSvcCsg1(911), -- Content Services Gateway Module wsx6148rj45v(912), -- 48 port 10/100BaseTX (RJ-45) wsx6148rj21v(913), -- 48 port 10/100BaseTX (RJ-21) wsSvcNam1(914), -- Network Analysis Module wsx6548getx(915), -- 48 port 10/100/1000BaseT(RJ-45) wsSvcPsd1(919), -- Persistent Store Device wsx6066SlbSk9(920), -- Content Switching Module with -- SSL daughter card wsx6148agetx(921), -- 48 port -- 10/100/1000BaseTX (RJ-45) wsx6148arj45(923), -- 48 port 10/100BaseTX (RJ-45) wsSvcWlan1k9(924), -- Wireless LAN Application Module wsSvcAon1k9(925), -- Application Oriented Network -- Switching ace106500k9(926), -- Application Control Engine -- 10G Service Module wsSvcWebVpnk9(927), -- Web VPN Module wsx6148FeSfp(928), -- 48 port 100Base-X SFP Module wsSvcAdm1k9(929), -- Anomaly Detection Module wsSvcAgm1k9(930), -- Anomaly Guard Module ace046500k9(936), -- Application Control Engine -- 4G Service Module wsSvcSamiBb(940), -- Service and Application Module -- for IP wsSvcWism2k9(946), -- Wireless Extensions Services -- Module wsSvcAsaSm1(947), -- Adaptive Security Appliance (ASA) -- Service Module wsSvcNam3k9(949), -- Network Analysis Module wsSvcAsaSm1k7(950), -- Adaptive Security Appliance (ASA) -- Service Module wsSvcVse1k9(951), -- Virtual Services Engine (VSE) -- Service Module wssup720(1001), -- Supervisor Mod 720 CPU board -- (moduleSubType2) wssup720base(1002), -- Supervisor Mod 720 base board m7600Sip600(1004), -- SPA (Shared Port Adapter) -- carrier card (SIP-10G) wsx6748getx(1007), -- 48 port 10/100/1000 (RJ-45) wsx670410ge(1008), -- 4 port 10 GE wsx6748sfp(1009), -- 48 port 1000Base FX (SFP GBIC) wsx6724sfp(1010), -- 24 port 1000Base FX (SFP GBIC) wsx670810ge(1016), -- 8 port X2 10 GE with DFC vss72010g(1021), -- Supervisor Mod 720 10G wsx6708a10ge(1023), -- 8 port X2 10 GE wsx671610ge(1027), -- 16 port 10 GE vssup2t10g(1031), -- Supervisor 2T baseboard wsx6148ege45at(1032), -- 48-port IEEE802.3at compliant -- Power over Ethernet Plus (PoEP) -- with VDB wsx671610t(1033), -- 16 port 10G RJ-45 wsx690810g(1034), -- 8 port 10GE with CTS wsx690440g(1035), -- 4-port 40-GE CFP wsx6148egetx(1036), -- 48-port IEEE802.3at compliant -- Power over Ethernet Plus (PoEP) wsx6848tx(1037), -- 48 port 10/100/1000 (RJ-45) wsx6848sfp(1039), -- 48 port 1000Base FX (SFP GBIC) wsx6824sfp(1040), -- 24 port 1000Base FX (SFP GBIC) wsx681610ge(1042), -- 16 port 10 GE wsx681610t(1043), -- 16 port 10G RJ-45 -- constellation 2 WAN module wsx65822pa(1101), -- Enhanced FlexWAN Module m7600Sip200(1102), -- SPA (Shared Port Adapter) -- carrier card (SIP-1) m7600Sip400(1103), -- SPA (Shared Port Adapter) -- carrier card (SIP-2) c7600ssc400(1104), -- SPA Jacket card c7600ssc600(1105), -- IPSEC-VPN SPA jacket card esm2x10ge(1106), -- 2x10G CWAN -- the following modules are for FEX c6800ia48td(1301), -- 48 port GE FEX c6800ia48fpd(1304), -- 48 port GE POE FEX -- the following modules are for Catalyst 6800 c6880x16p10g(1400), -- 16 ports 10G/1G SFP+ c6880x(1401), -- C6880x supervisor c6880xle16p10g(1402), -- 16 ports 10G/1G SFP+ Lite c6880xle(1403), -- C6880x supervisor Lite -- 7600 only module rsp720(1800), -- MSFC3 Daughterboard -- (moduleSubType2) rsp720base(1801), -- Router Switch Processor 720 -- (moduleSubType2) c7600msfc4(1805) -- 7600 MSFC4 cpu daughtercard -- (moduleSubType2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of module." ::= { moduleEntry 2 } moduleSerialNumber OBJECT-TYPE SYNTAX INTEGER (0..999999999) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The serial number of the module in a numeric format. If the module uses an alphanumeric serial number, this MIB object will return 0. This object is deprecated and replaced by entPhysicalSerialNum in ENTITY-MIB." ::= { moduleEntry 3 } moduleHwHiVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The high part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwHiVersion is 3. This object is deprecated and replaced by entPhysicalHardwareRev in ENTITY-MIB." ::= { moduleEntry 4 } moduleHwLoVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The low part of the hardware version of the module. For example, if the hardware version is 3.1, the value of moduleHwLoVersion is 1. This object is deprecated and replaced by entPhysicalHardwareRev in ENTITY-MIB." ::= { moduleEntry 5 } moduleFwHiVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The high part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwHiVersion is 3. This object is deprecated and replaced by entPhysicalFirmwareRev in ENTITY-MIB." ::= { moduleEntry 6 } moduleFwLoVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The low part of the firmware version number. For example, if the firmware version is 3.1, the value of moduleFwLoVersion is 1. This object is deprecated and replaced by entPhysicalFirmwareRev in ENTITY-MIB." ::= { moduleEntry 7 } moduleSwHiVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The high part of the software version number. For example, if the software version is 3.1, the value of moduleSwHiVersion is 3. This object is deprecated and replaced by entPhysicalSoftwareRev in ENTITY-MIB." ::= { moduleEntry 8 } moduleSwLoVersion OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The low part of the software version number. For example, if the software version is 3.1, the value of moduleSwLoVersion is 1. This object is deprecated and replaced by entPhysicalSoftwareRev in ENTITY-MIB." ::= { moduleEntry 9 } moduleStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "The operational status of the module. If the status is not ok, the value of moduleTestResult gives more detailed information about the module's failure condition(s)." ::= { moduleEntry 10 } moduleTestResult OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The result of the module's self test. A zero indicates that the module passed all tests. Bits set in the result indicate error conditions." ::= { moduleEntry 11 } moduleAction OBJECT-TYPE SYNTAX INTEGER { other(1), reset(2), enable(3), disable(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, returns one of the following results: other(1): module permanently enabled enable(3): module currently enabled disable(4): module currently disabled Setting this object to one of the acceptable values gives the following results: other(1): gives an error reset(2): resets the module's control logic enable(3): if the module status is configurable, enables the module, else gives error disable(4): if the module status is configurable, disables the module, else gives error. Setting this object to any other values results in an error." ::= { moduleEntry 12 } moduleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A descriptive string used by the network administrator to name the module." ::= { moduleEntry 13 } moduleNumPorts OBJECT-TYPE SYNTAX INTEGER (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of ports supported by the module." ::= { moduleEntry 14 } modulePortStatus OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "A series of bytes containing status information about the module and each of the ports on the module. The first byte contains the status for the module (same value as moduleStatus), and subsequent bytes contain status for the first through the last ports on the module (same value as portOperStatus)." ::= { moduleEntry 15 } moduleSubType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following empty(2), -- nothing installed -- sub modules for the WS-X5505,5506,5509 wsf5510(3), -- EARL 1 wsf5511(4), -- EARL 1+ -- sub modules for the WS-X5302 wsx5304(6), -- VIP II carrier -- sub modules for the WS-X5530,5540 wsf5520(7), -- EARL 1+ wsf5521(8), -- NFFC wsf5531(9), -- NFFC II -- sub modules for the WS-X6K-SUP-2GE wsf6020(100), -- L2 switching card wsf6020a(101),-- L2 switching card II wsf6kpfc(102),-- L3 switching engine wsf6kpfc2(103),-- L3 switching engine II wsf6kvpwr(104), -- inline power card wsf6kdfc(105), -- distributed switching -- engine wsf6kpfc2a(106),-- L3 switching engine -- IIA wsf6kdfca(107), -- distributed switching -- engine -- sub module for SPA Carrier Basecard vsp300dfc(200), -- VSP 300 Earl7 -- Daughtercard wsf6kpfc3a(201), -- Policy feature card 3A wsf6kdfc3a(202), -- Distributed forwarding card 3A wsf6700dfc3a(203), -- Distributed forwarding card 3A wsf6kdfc3bxl(205), -- Distributed forwarding card 3B -- XL wsf6kpfc3bxl(206), -- Policy feature card 3B XL wsf6700dfc3bxl(207), -- Distributed forwarding card 3B -- XL wsf6700cfc(208), -- Centralized forwarding card m7600pfc3c(213), -- Policy feature card 3C wsf6kpfc3b(216), -- Policy feature card 3B wsf6700dfc3b(217), -- Distributed forwarding card 3B wsf6700dfc3c(218), -- Distributed forwarding card wsf6700dfc3cxl(221), -- Distributed forwarding card wsf6kdfc3b(223), -- Distributed forwarding card 3B mec6524pfc3c(224), -- Policy feature card 3C sip600earl(225), -- Distributed feature card vsf6kpfc3cxl(226), -- Policy feature card 3C XL vsf6kpfc3c(227), -- Policy feature card 3C c7600esmdfc3cxl(228), -- Distributed forwarding card -- 3C XL vsf6kpfc4(229), -- Policy feature card 4 c7600esmdfc3c(230), -- Distributed forwarding card 3C wsf6kdfc4exl(231), -- Distributed forwarding card -- 4E XL c7600Es3cxl(232), -- Distributed forwarding card -- 3C XL c7600Es3c(233), -- Distributed forwarding card -- 3C wsf6kdfc4e(234), -- Distributed forwarding card -- 4E vsf6kpfc4xl(235), -- Policy feature card 4 XL wsf6kdfc4axl(236), -- Distributed forwarding card -- 4A XL wsf6kdfc4a(237), -- Distributed forwarding card -- 4A c6880xpfc(238), -- Policy feature card -- XXL Ultra c6880xlepfc(239), -- Policy feature card -- Lite c6880xdfc(240), -- Distributed forwarding card -- XXL Ultra c6880xledfc(241) -- Distributed forwarding card -- Lite } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of daughterboard attached to this module." ::= { moduleEntry 16 } moduleModel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer's model number for the module." ::= { moduleEntry 17 } moduleHwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) MAX-ACCESS read-only STATUS current DESCRIPTION "The hardware version of the module." ::= { moduleEntry 18 } moduleFwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The firmware version of the module." ::= { moduleEntry 19 } moduleSwVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) MAX-ACCESS read-only STATUS current DESCRIPTION "The software version of the module." ::= { moduleEntry 20 } moduleStandbyStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following active(2), standby(3), error(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Redundant status of a module that supports redundancy." ::= { moduleEntry 21 } moduleIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "If the module has a separate IP address to reach it by, then it is reported here. Otherwise, this object has a value of '00000000H'." ::= { moduleEntry 22 } moduleIPAddressVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "If the moduleIPAddress is valid then this object reports the VLAN to access that IP address on. Otherwise this object has a value of zero." ::= { moduleEntry 23 } moduleSubType2 OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following empty(2), -- nothing installed -- sub module 2 type for the WS-X5530,5540 wsu5531(3), -- 2 port 10/100BaseTX (RJ-45) wsu5533(5), -- 2 port 100BaseFX MM (SC) wsu5534(6), -- 2 port 1000BaseSX (SC) wsu5535(7), -- 2 port 100BaseFX SM (SC) wsu5536(8), -- 2 port 1000BaseLX (SC) wsu5537(9), -- 4 port 10/100BaseTX (RJ-45) wsu5538(10), -- 4 port 100BaseFX MM (SC) wsu5539(11), -- 4 port 100BaseFX SM (SC) -- sub module 2 type for WS-X6502-10GE -- The following two boards were cancelled wsg6488(102), -- 10GE-LR Serial 1310nm long haul wsg6489(103), -- 10GE-SX4 850nm WWDM short reach wsg6483(104), -- 10GE-ER Serial 1550nm extended reach wsg6485(105), -- 10GE-LX4 Campus 1310nm WWDM long -- haul/short reach. wsf6kFe48af(106), -- inline power card wsf6kGe48af(107), -- inline power card wsf6kVpwrGe(108), -- inline power card wsf6kFe48x2af(109), -- inline power card -- sub module 2 type for cat6k IOS Software wsf6kmsfc(207), -- Multilayer switch feature card wsf6kmsfc2(234), -- Multilayer switch feature card II -- sub module 2 type for WS-X4232,4224,4416 wsu4504fxmt(314), -- 4 port 100BaseFX (MT-RJ) wsu4502gb(315), -- 2 port 1000BaseX (GBIC) -- sub module 2 type for Cat6k modules wssvcidsupg(402), -- IDS 2 accelerator board wssvccmm6e1(403), -- 6 E1 port adapter wssvccmm6t1(404), -- 6 T1 port adapter wssvccmm24fxs(405), -- 24 FXS port adapter wssvccmmact(406), -- ad-hoc conferencing and -- transcoding port adapter aceModExpnDc(410), -- general purpose L4-L7 Processor -- DB Lite wsSvcAppProc1(411), -- Service Module Application -- Processor 1 wssvcpisa32(597), -- PISA card (Multilayer switch & -- service feature card) me6524msfc2a(598), -- Multilayer switch feature -- card II A wsf6kmsfc2a(599), -- Multilayer switch feature card II A c7600Es4Tg(618), -- Fixed 4x10GE with Pluggable Optics c7600Es2Tg(620), -- Fixed 2x10GE with Pluggable Optics c7600EsItu4TgLk(625), -- 4x10G ITU c7600EsItu2TgLk(626), -- 2x10GE ITU wssup720(1001), -- Supervisor Mod 720 CPU board vsf6kmsfc5(1005), -- SUP-2T CPU board vsf6kmsfc3(1026), -- Supervisor Mod 720 10G CPU board -- 7600 only module esm2x10ge(1701), -- CPU Daughterboard for esm2x10ge c7600msfc4(1805) -- 7600 MSFC4 cpu daughtercard } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of daughterboard attached to this module." ::= { moduleEntry 24 } moduleSlotNum OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "This value is determined by the chassis slot number where the module is located. Valid entries are 1 to the value of chassisNumSlots" ::= { moduleEntry 25 } moduleSerialNumberString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The serial number of the module. This MIB object will return the module serial number for any module that either a numeric or an alphanumeric serial number is being used." ::= { moduleEntry 26 } moduleEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this module." ::= { moduleEntry 27 } moduleAdditionalStatus OBJECT-TYPE SYNTAX BITS { fruInstalled(0), powerDenied(1), faulty(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The additional status of the module. fruInstalled(0) indicates that whether or not FRU is installed on the module. powerDenied(1) indicates that whether phones connected to the ports of this module are denied of power. faulty(2) indicates hardware faulty." ::= { moduleEntry 28} -- the port group -- Implementation of the port group is current for all Cisco Workgroup -- Stack products. portTable OBJECT-TYPE SYNTAX SEQUENCE OF PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module." ::= { portGrp 1 } portEntry OBJECT-TYPE SYNTAX PortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing information for a particular port on a module." INDEX { portModuleIndex, portIndex } ::= { portTable 1 } PortEntry ::= SEQUENCE { portModuleIndex INTEGER, portIndex INTEGER, portCrossIndex INTEGER, portName DisplayString, portType INTEGER, portOperStatus INTEGER, portCrossGroupIndex INTEGER, portAdditionalStatus INTEGER, portAdminSpeed INTEGER, portDuplex INTEGER, portIfIndex INTEGER, portSpantreeFastStart INTEGER, portAdminRxFlowControl INTEGER, portOperRxFlowControl INTEGER, portAdminTxFlowControl INTEGER, portOperTxFlowControl INTEGER, portMacControlTransmitFrames Counter32, portMacControlReceiveFrames Counter32, portMacControlPauseTransmitFrames Counter32, portMacControlPauseReceiveFrames Counter32, portMacControlUnknownProtocolFrames Counter32, portLinkFaultStatus INTEGER, portAdditionalOperStatus BITS, portInlinePowerDetect TruthValue, portEntPhysicalIndex PhysicalIndex, portErrDisableTimeOutEnable INTEGER } portModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located." ::= { portEntry 1 } portIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module." ::= { portEntry 2 } portCrossIndex OBJECT-TYPE SYNTAX INTEGER (1..4080) MAX-ACCESS read-only STATUS current DESCRIPTION "A cross-reference to the port's index within another mib group. The value is dependent on the type of port. For an FDDI port, this corresponds to the snmpFddiPORTIndex." ::= { portEntry 3 } portName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "A descriptive string used by the network administrator to name the port." ::= { portEntry 4 } portType OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following cddi(2), -- CDDI (UTP FDDI) fddi(3), -- Multi Mode fiber FDDI tppmd(4), -- ANSI standard UTP FDDI mlt3(5), -- MLT-3 UTP FDDI sddi(6), -- STP FDDI smf(7), -- Single Mode fiber FDDI e10BaseT(8), -- UTP Ethernet e10BaseF(9), -- Multi Mode fiber Ethernet scf(10), -- small-connector fiber FDDI e100BaseTX(11),-- UTP Fast Ethernet (Cat 5) e100BaseT4(12),-- UTP Fast Ethernet (Cat 3) e100BaseF(13), -- Multi Mode fiber Fast -- Ethernet atmOc3mmf(14), -- Multi Mode fiber OC-3 ATM atmOc3smf(15), -- Single Mode fiber OC-3 ATM atmOc3utp(16), -- UTP OC-3 ATM e100BaseFsm(17), -- Single Mode fiber Fast -- Ethernet e10a100BaseTX(18), -- 10/100 UTP Ethernet -- (Cat 3/5) mii(19), -- MII Ethernet vlanRouter(20), -- vlan router connection remoteRouter(21), -- tokenring(22), -- Token Ring atmOc12mmf(23),-- Multi Mode fiber OC-12 ATM atmOc12smf(24),-- Single Mode fiber OC-12 -- ATM atmDs3(25), -- DS-3 ATM tokenringMmf(26), -- Multi Mode fiber Token -- Ring e1000BaseLX(27), -- Long Wave fiber Giga -- Ethernet e1000BaseSX(28), -- Short Wave fiber Giga -- Ethernet e1000BaseCX(29), -- Copper Gigabit Ethernet networkAnalysis(30), -- Network Analysis -- connection e1000Empty(31), -- GBIC not installed e1000BaseLH(32), -- Long Haul fiber Giga -- Ethernet e1000BaseT(33), -- Twisted Pair Giga -- Ethernet e1000UnsupportedGbic(34), -- Unsupported Gbic Giga -- Ethernet e1000BaseZX(35), -- Extended Reach Giga -- Ethernet depi2(36), -- Digital Ethernet Phone -- Interface 2 Mbps t1(37), -- T1 e1(38), -- E1 fxs(39), -- FXS fxo(40), -- FXO transcoding(41), -- transcoding DSP conferencing(42),-- conferencing DSP atmOc12mm(43), -- OC-12 ATM MMF atmOc12smi(44), -- OC-12 ATM SMIR atmOc12sml(45), -- OC-12 ATM SML posOc12mm(46), -- OC-12 POS MM posOc12smi(47), -- OC-12 POS SMIR posOc12sml(48), -- OC-12 POS SMLR posOc48sms(49), -- OC-48 POS SMS posOc48smi(50), -- OC-48 POS SMIR posOc48sml(51), -- OC-48 POS SMLR posOc3mm(52), -- OC-3 POS MM posOc3smi(53), -- OC-3 POS SMIR posOc3sml(54), -- OC-3 POS SMLR intrusionDetect(55), -- intrusion detection e10GBaseCPX(56), --10GE Parallel 860nm Laser e10GBaseLX4(57), -- 10GE Wide-WDM 1310nm -- Laser e10GBaseEX4(59), -- 10GE Wide-WDM 1550 Laser e10GEmpty(60), -- 10GE not installed e10a100a1000BaseT(61), -- 10/100/1000 BaseT dptOc48mm(62), -- OC-48 DPT MM dptOc48smi(63), -- OC-48 DPT SMIR dptOc48sml(64), -- OC-48 DPT SMLR e10GBaseLR(65), -- 10GE Serial 1310nm Laser chOc12smi(66), -- OC-12 channelized SMIR chOc12mm(67), -- OC-12 channelized MM chOc48ss(68), -- OC-48 channelized SS chOc48smi(69), -- OC-48 channelized SMIR e10GBaseSX4(70), -- 10GE Wide-WDM 850nm -- Laser e10GBaseER(71), -- 10GE Serial 1550nm Laser contentEngine(72),-- content engine -- connection ssl(73), -- SSL connection firewall(74), -- Firewall connection vpnIpSec(75), -- VPN IP Sec connection ct3(76), -- DS3 Channelized e1000BaseCwdm1470(77), -- CWDM 1470 Giga Ethernet e1000BaseCwdm1490(78), -- CWDM 1490 Giga Ethernet e1000BaseCwdm1510(79), -- CWDM 1510 Giga Ethernet e1000BaseCwdm1530(80), -- CWDM 1530 Giga Ethernet e1000BaseCwdm1550(81), -- CWDM 1550 Giga Ethernet e1000BaseCwdm1570(82), -- CWDM 1570 Giga Ethernet e1000BaseCwdm1590(83), -- CWDM 1590 Giga Ethernet e1000BaseCwdm1610(84), -- CWDM 1610 Giga Ethernet e1000BaseBT(85), -- BT Giga Ethernet e1000BaseUnapproved(86), -- Unappeoved Giga Ethernet chOc3smi(87), -- OC-3 channelized SMIR mcr(88), -- Mobile Context Registry -- connection coe(89), -- Content Optimization Engine -- connection mwa(90), -- Mobile Wireless Application -- connection psd(91), -- Persistent Store Device -- connection e100BaseLX(92), -- Long Wave fiber Fast -- Ethernet e10GBaseSR(93), -- 10GE Serial 850nm Laser e10GBaseCX4(94), -- 10GE XAUI Copper e10GBaseWdm1550(95), -- 10GE Serial 1550nm Laser e10GBaseEdc1310(96), -- 10GE Serial 1310nm EDC Laser e10GBaseSW(97), -- 10GE Laser e10GBaseLW(98), -- 10GE Laser e10GBaseEW(99), -- 10GE Laser lwa(100), -- Lan Wireless Application -- connection aons(101), -- Application Oriented Network -- Switching sslVpn(102), -- Web/VPN e100BaseEmpty(103), -- Fiber Fast Ethernet -- not installed adsm(104), -- Distributed Denial of Service -- Detector agsm(105), -- Distributed Denial of Service -- Guard aces(106), -- Application Control Engine -- Service intrusionProtect(109), -- intrusion protection e1000BaseSvc(110), -- Service Module Giga Ethernet e10GBaseSvc(111), -- Service Module 10G Ethernet e40GBaseEmpty(113), -- 40G Ethernet not installed e1000BaseUnknown(1000), -- Unknown Giga Ethernet e10GBaseUnknown(1001), -- Unknown 10G e10GBaseUnapproved(1002), -- Unapproved 10G e1000BaseWdmRxOnly(1003), -- WDM Rx ONLY Giga Ether e1000BaseDwdm3033(1004), -- DWDM 3033 Giga Ethernet e1000BaseDwdm3112(1005), -- DWDM 3112 Giga Ethernet e1000BaseDwdm3190(1006), -- DWDM 3190 Giga Ethernet e1000BaseDwdm3268(1007), -- DWDM 3268 Giga Ethernet e1000BaseDwdm3425(1008), -- DWDM 3425 Giga Ethernet e1000BaseDwdm3504(1009), -- DWDM 3504 Giga Ethernet e1000BaseDwdm3582(1010), -- DWDM 3582 Giga Ethernet e1000BaseDwdm3661(1011), -- DWDM 3661 Giga Ethernet e1000BaseDwdm3819(1012), -- DWDM 3819 Giga Ethernet e1000BaseDwdm3898(1013), -- DWDM 3898 Giga Ethernet e1000BaseDwdm3977(1014), -- DWDM 3977 Giga Ethernet e1000BaseDwdm4056(1015), -- DWDM 4056 Giga Ethernet e1000BaseDwdm4214(1016), -- DWDM 4214 Giga Ethernet e1000BaseDwdm4294(1017), -- DWDM 4294 Giga Ethernet e1000BaseDwdm4373(1018), -- DWDM 4373 Giga Ethernet e1000BaseDwdm4453(1019), -- DWDM 4453 Giga Ethernet e1000BaseDwdm4612(1020), -- DWDM 4612 Giga Ethernet e1000BaseDwdm4692(1021), -- DWDM 4692 Giga Ethernet e1000BaseDwdm4772(1022), -- DWDM 4772 Giga Ethernet e1000BaseDwdm4851(1023), -- DWDM 4851 Giga Ethernet e1000BaseDwdm5012(1024), -- DWDM 5012 Giga Ethernet e1000BaseDwdm5092(1025), -- DWDM 5092 Giga Ethernet e1000BaseDwdm5172(1026), -- DWDM 5172 Giga Ethernet e1000BaseDwdm5252(1027), -- DWDM 5252 Giga Ethernet e1000BaseDwdm5413(1028), -- DWDM 5413 Giga Ethernet e1000BaseDwdm5494(1029), -- DWDM 5494 Giga Ethernet e1000BaseDwdm5575(1030), -- DWDM 5575 Giga Ethernet e1000BaseDwdm5655(1031), -- DWDM 5655 Giga Ethernet e1000BaseDwdm5817(1032), -- DWDM 5817 Giga Ethernet e1000BaseDwdm5898(1033), -- DWDM 5898 Giga Ethernet e1000BaseDwdm5979(1034), -- DWDM 5979 Giga Ethernet e1000BaseDwdm6061(1035), -- DWDM 6061 Giga Ethernet e10GBaseWdmRxOnly(1036), -- DWDM 10G WDM Rx ONLY e10GBaseDwdm3033(1037), -- DWDM 10G 3033 Laser e10GBaseDwdm3112(1038), -- DWDM 10G 3112 Laser e10GBaseDwdm3190(1039), -- DWDM 10G 3190 Laser e10GBaseDwdm3268(1040), -- DWDM 10G 3268 Laser e10GBaseDwdm3425(1041), -- DWDM 10G 3425 Laser e10GBaseDwdm3504(1042), -- DWDM 10G 3504 Laser e10GBaseDwdm3582(1043), -- DWDM 10G 3582 Laser e10GBaseDwdm3661(1044), -- DWDM 10G 3661 Laser e10GBaseDwdm3819(1045), -- DWDM 10G 3819 Laser e10GBaseDwdm3898(1046), -- DWDM 10G 3898 Laser e10GBaseDwdm3977(1047), -- DWDM 10G 3977 Laser e10GBaseDwdm4056(1048), -- DWDM 10G 4056 Laser e10GBaseDwdm4214(1049), -- DWDM 10G 4214 Laser e10GBaseDwdm4294(1050), -- DWDM 10G 4294 Laser e10GBaseDwdm4373(1051), -- DWDM 10G 4373 Laser e10GBaseDwdm4453(1052), -- DWDM 10G 4453 Laser e10GBaseDwdm4612(1053), -- DWDM 10G 4612 Laser e10GBaseDwdm4692(1054), -- DWDM 10G 4692 Laser e10GBaseDwdm4772(1055), -- DWDM 10G 4772 Laser e10GBaseDwdm4851(1056), -- DWDM 10G 4851 Laser e10GBaseDwdm5012(1057), -- DWDM 10G 5012 Laser e10GBaseDwdm5092(1058), -- DWDM 10G 5092 Laser e10GBaseDwdm5172(1059), -- DWDM 10G 5172 Laser e10GBaseDwdm5252(1060), -- DWDM 10G 5252 Laser e10GBaseDwdm5413(1061), -- DWDM 10G 5413 Laser e10GBaseDwdm5494(1062), -- DWDM 10G 5494 Laser e10GBaseDwdm5575(1063), -- DWDM 10G 5575 Laser e10GBaseDwdm5655(1064), -- DWDM 10G 5655 Laser e10GBaseDwdm5817(1065), -- DWDM 10G 5817 Laser e10GBaseDwdm5898(1066), -- DWDM 10G 5898 Laser e10GBaseDwdm5979(1067), -- DWDM 10G 5979 Laser e10GBaseDwdm6061(1068), -- DWDM 10G 6061 Laser e1000BaseBX10D(1069), -- Giga Ethernet bi-directional 10km -- Downlink over SMF e1000BaseBX10U(1070), -- Giga Ethernet bi-directional 10km -- Uplink over SMF e100BaseUnknown(1071), -- Unknown Fiber Fast Ethernet e100BaseUnapproved(1072), -- Unapproved Fiber Fast Ethernet e100BaseSX(1073), -- Short Wave Fiber Fast Ethernet e100BaseBX10D(1074), -- Fiber Fast Ethernet bi-directional -- 10km Downlink over SMF e100BaseBX10U(1075), -- Fiber Fast Ethernet bi-directional -- 10km Uplink over SMF e10GBaseBad(1076), -- Bad 10G e10GBaseZR(1077), -- 10GE Laser e100BaseEX(1078), -- Fiber Fast Ethernet e100BaseZX(1079), -- Extended Reach Fiber Fast Ethernet e10GBaseLRM(1080), -- 10GE Laser 300m over 50um Multi Mode Fiber e10GBaseTPluggable(1081), -- 10GE twisted pair on Transceiver e10GBaseCU1M(1082), -- 10GE 1-m Twinax cable assembly e10GBaseCU3M(1083), -- 10GE 3-m Twinax cable assembly e10GBaseCU5M(1084), -- 10GE 5-m Twinax cable assembly e10GBaseCU7M(1085), -- 10GE 7-m Twinax cable assembly e10GBaseCUdot3M(1086), -- 10GE .3-m Twinax cable assembly e10GBaseCU2M(1087), -- 10GE 2-m Twinax cable assembly e10GBaseCU4M(1088), -- 10GE 4-m Twinax cable assembly e10GBaseCU6M(1089), -- 10GE 6-m Twinax cable assembly e10GBaseUSR(1090), -- 10GE Laser Ultra Short Reach -- Multi Mode Fiber e10GBaseLRMSM(1091), -- 10GE Laser 300m over 50um Single Mode Fiber e1000BaseDwdm3346(1092), -- DWDM 3346 Giga Ethernet e1000BaseDwdm3739(1093), -- DWDM 3739 Giga Ethernet e1000BaseDwdm4134(1094), -- DWDM 4134 Giga Ethernet e1000BaseDwdm4532(1095), -- DWDM 4532 Giga Ethernet e1000BaseDwdm4931(1096), -- DWDM 4931 Giga Ethernet e1000BaseDwdm5332(1097), -- DWDM 5332 Giga Ethernet e1000BaseDwdm5736(1098), -- DWDM 5736 Giga Ethernet e1000BaseDwdm6141(1099), -- DWDM 6141 Giga Ethernet e40GBaseLR(1100), -- 40G Ethernet LR e40GBaseSR(1101), -- 40G Ethernet SR e40GBaseUnapproved(1102), -- Unapproved 40G Ethernet e10GBaseDwdm3347(1104), -- DWDM 10G 3347 Laser e10GBaseDwdm3740(1105), -- DWDM 10G 3740 Laser e10GBaseDwdm4135(1106), -- DWDM 10G 4135 Laser e10GBaseDwdm4532(1107), -- DWDM 10G 4532 Laser e10GBaseDwdm4932(1108), -- DWDM 10G 4932 Laser e10GBaseDwdm5333(1109), -- DWDM 10G 5333 Laser e10GBaseDwdm5736(1110), -- DWDM 10G 5736 Laser e10GBaseDwdm6141(1111), -- DWDM 10G 6141 Laser e10GBaseACU7M(1112), -- 10GE active 7 meter Twinax cable -- assembly e10GBaseACU10M(1113), -- 10GE active 10 meter Twinax cable -- assembly e1000BaseEXSMD(1114), -- GE SMF, 1310-nm wavelength -- extended operating temp range e1000BaseZXSMD(1115), -- GE SMF, 1550-nm wavelength -- extended operating temp range e1000BaseTE(1116), -- GE Copper -- extended operating temp range e1000BaseSXMMD(1117), -- GE MMF, 850-nm wavelength -- extended operating temp range e1000BaseLHSMD(1118), -- GE MMF and SMF, 1300-nm wavelength -- extended operating temp range e100BaseFXGE(1119) -- Fiber Fast Ethernet MMF gor GE -- 1310-nm wavelength } MAX-ACCESS read-only STATUS current DESCRIPTION "The type of physical layer medium dependent interface on the port." ::= { portEntry 5 } portOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- status ok minorFault(3), -- minor problem majorFault(4) -- major problem } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the port." ::= { portEntry 6 } portCrossGroupIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "A cross-reference to another mib group for this port. The value is dependent on the type of port. For an FDDI port this corresponds to the snmpFddiPORTSMTIndex." ::= { portEntry 7 } portAdditionalStatus OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-only STATUS current DESCRIPTION "Additional status information for the port. The value is a sum. It initially takes the value zero, then for each state that is true, 2 raised to a power is added to the sum. The powers are according to the following table: State Power Transmit 0 Receive 1 Collision 2 Transmit state indicates that at least one packet was transmitted by the port in the last polling period. Receive state indicates that at least one packet was received by the port in the last polling period. Collision state indicates that at least one collision was detected on the port in the last polling period. Note that if a state is not applicable to a particular port or additional status is not supported on a particular port, its value is always false for that port." ::= { portEntry 8 } portAdminSpeed OBJECT-TYPE SYNTAX INTEGER { autoDetect(1), autoDetect10100(2), -- Auto Detect with, -- only allowed values: 10 & 100 s4000000(4000000), -- 4 Mbps s10000000(10000000), -- 10 Mbps s16000000(16000000), -- 16 Mbps s45000000(45000000), -- 45 Mbps s64000000(64000000), -- 64 Mbps s100000000(100000000), -- 100 Mbps s155000000(155000000), -- 155 Mbps s400000000(400000000), -- 400 Mbps s622000000(622000000), -- 622 Mbps s1000000000(1000000000), -- 1 Gbps s1544000(1544000), -- 1.544 Mbps s2000000(2000000), -- 2 Mbps s2048000(2048000), -- 2.048 Mbps s64000(64000), -- 64 kps s10G(10) -- 10 Gps } MAX-ACCESS read-write STATUS current DESCRIPTION "The desired speed of the port. The current operational speed of the port can be determined from ifSpeed." ::= { portEntry 9 } portDuplex OBJECT-TYPE SYNTAX INTEGER { half(1), full(2), disagree(3), -- read-only auto(4) -- read-only } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port is operating in half- duplex, full-duplex, disagree or auto negotiation mode. If the port could not agree with the far end on port duplex, the port will be in disagree(3) mode." ::= { portEntry 10 } portIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the instance of the ifIndex object, defined in MIB-II, for the interface corresponding to this port." ::= { portEntry 11 } portSpantreeFastStart OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the port is operating in spantree fast start mode. A port with fast start enabled is immediately put in spanning tree forwarding state on link up, rather than starting in blocking state which is the normal operation. This is useful when the port is known to be connected to a single station which has problems waiting for the normal spanning tree operation to put the port in forwarding state. This object is deprecated and replaced by stpxFastStartPortTable in CISCO-STP-EXTENSIONS-MIB." DEFVAL { disabled } ::= { portEntry 12 } portAdminRxFlowControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), desired(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the receive flow control administrative status set on the port. If the status is set to on(1), the port will require the far end to send flow control. If the status is set to off(2), the port will not allow far end to send flow control. If the status is set to desired(3), the port will allow the far end to send the flow control." DEFVAL { off } ::= { portEntry 13} portOperRxFlowControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), disagree(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the receive flow control operational status of the port. If the port could not agree with the far end on a link protocol, its operational status will be disagree(3)." ::= { portEntry 14} portAdminTxFlowControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), desired(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the transmit flow control administrative status set on the port. If the status is set to on(1), the port will send flow control to the far end. If the status is set to off(2), the port will not send flow control to the far end. If the status is set to desired(3), the port will send flow control to the far end if the far end supports it." ::= { portEntry 15} portOperTxFlowControl OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), disagree(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the transmit flow control operational status of the port. If the port could not agree with the far end on a link protocol, its operational status will be disagree(3)." ::= { portEntry 16} portMacControlTransmitFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MAC control frames passed to the MAC sublayer for transmission." ::= { portEntry 17} portMacControlReceiveFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MAC control frames passed by the MAC sublayer to the MAC Control sublayer on receive." ::= { portEntry 18} portMacControlPauseTransmitFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PAUSE frames passed to the MAC sublayer for transmission." ::= { portEntry 19} portMacControlPauseReceiveFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of PAUSE frames passed by the MAC sublayer to the MAC Control sublayer on receive." ::= { portEntry 20} portMacControlUnknownProtocolFrames OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of MAC Control frames received with an opcode that is not supported by the device." ::= { portEntry 21} portLinkFaultStatus OBJECT-TYPE SYNTAX INTEGER { noFault(1), nearEndFault(2), nearEndConfigFail(3), farEndDisable(4), farEndFault(5), farEndConfigFail(6), notApplicable(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies additional link fault status on a gigabit link. noFault: Link is up and operational. nearEndFault: The port is enabled but there is no GBIC present or the local port cannot synchronize with the remote end. nearEndConfigFail: The local port has detected a configuration mismatch with the remote end. farEndDisable: The far end is in the disabled state. farEndFault: The remote port is cannot synchronize. farEndConfigFail: The remote port has detected a configuration mismatch with the local end. notApplicable: Link fault status is not applicable on this port." ::= { portEntry 22 } portAdditionalOperStatus OBJECT-TYPE SYNTAX BITS { other(0), -- none of the following connected(1), standby(2), faulty(3), notConnected(4), inactive(5), shutdown(6), dripDis(7), disabled(8), monitor(9), errdisable(10), linkFaulty(11), onHook(12), offHook(13), reflector(14) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of the port which is showing additional detailed information of the port." ::= { portEntry 23 } portInlinePowerDetect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate if the port detects an inline power capable device connected to it." ::= { portEntry 24 } portEntPhysicalIndex OBJECT-TYPE SYNTAX PhysicalIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the instance of the entPhysicalIndex object, defined in ENTITY-MIB, for the entity physical index corresponding to this port." ::= { portEntry 25 } portErrDisableTimeOutEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether a port that is put into errdisable state by a cause as specified by sysErrDisableTimeoutEnable will be re-enabled automatically during the timeout interval as specified by sysErrDisableTimeoutInterval." DEFVAL { enabled } ::= { portEntry 26 } -- the tftp group -- Implementation of the tftp group is current for all Cisco Workgroup -- Stack products which implement tftp upload/download functions. tftpHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of source/destination host for the TFTP transfer or storage device transfer. If the name is for the TFTP transfer, it can be the IP address or the host name. If the name for the storage device transfer, it will be in the format of deviceName: (e.g. slot0:, slot1:)." ::= { tftpGrp 1 } tftpFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "Name of file for the TFTP transfer or for storage device transfer." ::= { tftpGrp 2 } tftpModule OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "Which module's code/configuration is being transferred." ::= { tftpGrp 3 } tftpAction OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following downloadConfig(2), uploadConfig(3), downloadSw(4), uploadSw(5), downloadFw(6), uploadFw(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to one of the acceptable values initiates the requested action using the information given in tftpHost, tftpFile, tftpModule. downloadConfig(2): receive configuration from host/file uploadConfig(3) : send configuration to host/file downloadSw(4) : receive software image from host/file uploadSw(5) : send software image to host/file downloadFw(6) : receive firmware image from host/file uploadFw(7) : send firmware image to host/file Setting this object to any other value results in an error." ::= { tftpGrp 4 } tftpResult OBJECT-TYPE SYNTAX INTEGER { inProgress(1), success(2), noResponse(3), tooManyRetries(4), noBuffers(5), noProcesses(6), badChecksum(7), badLength(8), badFlash(9), serverError(10), userCanceled(11), wrongCode(12), fileNotFound(13), invalidTftpHost(14), invalidTftpModule(15), accessViolation(16), unknownStatus(17), invalidStorageDevice(18), insufficientSpaceOnStorageDevice(19), insufficientDramSize(20), incompatibleImage(21) } MAX-ACCESS read-only STATUS current DESCRIPTION "Contains result of the last tftp action request." ::= { tftpGrp 5 } -- the brouter group --Implementation of the brouter group is current for all Cisco Workgroup --Stack products which implement combined bridging/routing functions. brouterEnableRip OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the RIP protocol is enabled." DEFVAL { enabled } ::= { brouterGrp 1 } brouterEnableSpantree OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if Spanning Tree protocol is enabled." DEFVAL { disabled } ::= { brouterGrp 2 } brouterEnableGiantCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether special handling of giant packets is enabled." DEFVAL { disabled } ::= { brouterGrp 3 } brouterEnableIpFragmentation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether IP fragmentation is enabled." DEFVAL { enabled } ::= { brouterGrp 4 } brouterEnableUnreachables OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether ICMP unreachable messages are sent by the system." DEFVAL { enabled } ::= { brouterGrp 5 } brouterCamAgingTime OBJECT-TYPE SYNTAX INTEGER (0..1000000) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The aging time for the CAM table. This duplicate item is the same value as dot1dTpAgingTime." DEFVAL { 300 } ::= { brouterGrp 6 } brouterCamMode OBJECT-TYPE SYNTAX INTEGER { filtering(1), forwarding(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Mode in which the CAM module is operating." DEFVAL { filtering } ::= { brouterGrp 7 } brouterIpxSnapToEther OBJECT-TYPE SYNTAX INTEGER { snap(1), ethernetII(2), iso8023(3), raw8023(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default translation for IPX packets when bridging from FDDI SNAP to Ethernet." DEFVAL { raw8023 } ::= { brouterGrp 8 } brouterIpx8023RawToFddi OBJECT-TYPE SYNTAX INTEGER { snap(1), iso8022(5), fddiRaw(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default translation for IPX packets when bridging from Ethernet 802.3 Raw to FDDI." DEFVAL { snap } ::= { brouterGrp 9 } brouterEthernetReceiveMax OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of Ethernet receive buffers processed at one time per port." DEFVAL { 64 } ::= { brouterGrp 10 } brouterEthernetTransmitMax OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of Ethernet transmit buffers processed at one time per port." DEFVAL { 64 } ::= { brouterGrp 11 } brouterFddiReceiveMax OBJECT-TYPE SYNTAX INTEGER (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of FDDI receive buffers processed at one time per port." DEFVAL { 256 } ::= { brouterGrp 12 } brouterFddiTransmitMax OBJECT-TYPE SYNTAX INTEGER (1..512) MAX-ACCESS read-write STATUS current DESCRIPTION "Maximum number of FDDI transmit buffers processed at one time per port." DEFVAL { 256 } ::= { brouterGrp 13 } -- the brouter port table brouterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF BrouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of brouter port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module." ::= { brouterGrp 14 } brouterPortEntry OBJECT-TYPE SYNTAX BrouterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing bridge/router information for a particular port on a module." INDEX { brouterPortModule, brouterPort } ::= { brouterPortTable 1 } BrouterPortEntry ::= SEQUENCE { brouterPortModule INTEGER, brouterPort INTEGER, brouterPortIpVlan VlanIndex, brouterPortIpAddr IpAddress, brouterPortNetMask IpAddress, brouterPortBroadcast IpAddress, brouterPortBridgeVlan INTEGER, brouterPortIpHelpers OCTET STRING } brouterPortModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module index where this port is located." ::= { brouterPortEntry 1 } brouterPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { brouterPortEntry 2 } brouterPortIpVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The IP Virtual LAN to which this port belongs." ::= { brouterPortEntry 3 } brouterPortIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's IP address." ::= { brouterPortEntry 4 } brouterPortNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's subnet mask." ::= { brouterPortEntry 5 } brouterPortBroadcast OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's broadcast address." ::= { brouterPortEntry 6 } brouterPortBridgeVlan OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS read-write STATUS current DESCRIPTION "The bridge Virtual LAN to which this port belongs." ::= { brouterPortEntry 7 } brouterPortIpHelpers OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of which other Virtual LANs UDP/IP broadcasts received on this port will be forwarded to. The normal situation is broadcasts NOT forwarded beyond the originating VLAN, but it can be useful in certain circumstances. This is an octet string value with bits set to indicate forwarded to VLANs. It can be interpreted as a sum of f(x) as x goes from 0 to 1023, where f(x) = 0 for no forwarding to VLAN x and f(x) = exp(2, x) for VLAN x forwarded to. If all bits are 0 or the octet string is zero length, then UDP/IP broadcasts are not being forwarded to other VLANs." ::= { brouterPortEntry 8 } -- additional brouter group objects brouterIpx8022ToEther OBJECT-TYPE SYNTAX INTEGER { snap(1), ethernetII(2), iso8023(3), raw8023(4) } MAX-ACCESS read-write STATUS current DESCRIPTION "The default translation for IPX packets when bridging from FDDI 802.2 to Ethernet." DEFVAL { iso8023 } ::= { brouterGrp 15 } brouterEnableTransitEncapsulation OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Ethernet packets are encapsulated on FDDI via transit encapsulation protocol. Normally this option would be disabled to allow translational bridging between Ethernet and FDDI to take place." DEFVAL { disabled } ::= { brouterGrp 16 } brouterEnableFddiCheck OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether MAC addresses learned one side of a translational bridge should not be allowed to be learned on the other side of the bridge. The presence certain misbehaving devices on the network may require this option to be enabled." DEFVAL { disabled } ::= { brouterGrp 17 } brouterEnableAPaRT OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Automatic Packet Recognition and Translation feature is enabled on translational bridge(s) in the box. If APaRT is disabled, the default translations as defined by the objects brouterIpx8022ToEther, brouterIpx8023RawToFddi, brouterIpxSnapToEther, etc, are used on all packets and no automatic learning of translation information is performed." DEFVAL { enabled } ::= { brouterGrp 18 } -- the filter group -- Implementation of the filter group is current for all Cisco Workgroup -- Stack products which implement custom packet filtering functions. -- the filter mac table filterMacTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filter mac entries." ::= { filterGrp 1 } filterMacEntry OBJECT-TYPE SYNTAX FilterMacEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing MAC address filter information." INDEX { filterMacModule, filterMacPort, filterMacAddress } ::= { filterMacTable 1 } FilterMacEntry ::= SEQUENCE { filterMacModule INTEGER, filterMacPort INTEGER, filterMacAddress MacAddress, filterMacType INTEGER } filterMacModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { filterMacEntry 1 } filterMacPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { filterMacEntry 2 } filterMacAddress OBJECT-TYPE SYNTAX MacAddress -- OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "A MAC address. If the source or destination MAC address equals this value, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. The packet is dropped if a match doesn't occur and at least one MAC address filter was specified with permit(3)." ::= { filterMacEntry 3 } filterMacType OBJECT-TYPE SYNTAX INTEGER { deny(1), -- add deny entry invalid(2), -- remove this entry permit(3), -- add permit entry permitSrc(4), -- add permit source entry permitDst(5), -- add permit dest entry denySrc(6), -- add deny source entry denyDst(7), -- add deny dest entry denySrcLearn(8) -- add deny source learn entry } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to invalid(2) removes the corresponding entry from the filterMacTable. To add a new entry to the filterMacTable, set this object to deny(1) or any value from permit(3) to denySrcLearn(8) for a module, port, and MAC address not already in the table." ::= { filterMacEntry 4 } -- the filter vendor table filterVendorTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterVendorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filter vendor ID entries." ::= { filterGrp 2 } filterVendorEntry OBJECT-TYPE SYNTAX FilterVendorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing vendor ID filter information." INDEX { filterVendorModule, filterVendorPort, filterVendorId } ::= { filterVendorTable 1 } FilterVendorEntry ::= SEQUENCE { filterVendorModule INTEGER, filterVendorPort INTEGER, filterVendorId VendorIdType, filterVendorType INTEGER } filterVendorModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { filterVendorEntry 1 } filterVendorPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { filterVendorEntry 2 } filterVendorId OBJECT-TYPE SYNTAX VendorIdType -- OCTET STRING (SIZE (3)) MAX-ACCESS read-only STATUS current DESCRIPTION "The vendor ID portion of a MAC address. If the source or destination MAC address has the same vendor ID, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. The packet is dropped if a match doesn't occur and at least one Vendor ID filter was specified with permit(3)." ::= { filterVendorEntry 3 } filterVendorType OBJECT-TYPE SYNTAX INTEGER { deny(1), -- add deny entry invalid(2), -- remove this entry permit(3) -- add permit entry } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to invalid(2) removes the corresponding entry from the filterVendorTable. To add a new entry to the filterVendorTable, set this object to deny(1) or permit(3) for a module, port, and vendor ID not already in the table." ::= { filterVendorEntry 4 } -- the filter protocol table filterProtocolTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filter protocol entries." ::= { filterGrp 3 } filterProtocolEntry OBJECT-TYPE SYNTAX FilterProtocolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing PROTOCOL address filter information." INDEX { filterProtocolModule, filterProtocolPort, filterProtocolValue } ::= { filterProtocolTable 1 } FilterProtocolEntry ::= SEQUENCE { filterProtocolModule INTEGER, filterProtocolPort INTEGER, filterProtocolValue INTEGER, filterProtocolType INTEGER } filterProtocolModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { filterProtocolEntry 1 } filterProtocolPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { filterProtocolEntry 2 } filterProtocolValue OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "A 16-bit protocol value. If the packet's type field or the packet's DSAP/SSAP field is equal to this value, a match occurs. The packet is dropped if a match occurs and deny(1) was specified. The packet is dropped if a match doesn't occur and at least one protocol type filter was specified with permit(3)." ::= { filterProtocolEntry 3 } filterProtocolType OBJECT-TYPE SYNTAX INTEGER { deny(1), -- add deny entry invalid(2), -- remove this entry permit(3) -- add permit entry } MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this object to invalid(2) removes the corresponding entry from the filterProtocolTable. To add a new entry to the filterProtocolTable, set this object to deny(1) or permit(3) for a module, port, and protocol value not already in the table." ::= { filterProtocolEntry 4 } -- the filter test table filterTestTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filter test entries." ::= { filterGrp 4 } filterTestEntry OBJECT-TYPE SYNTAX FilterTestEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing test filter information." INDEX { filterTestModule, filterTestPort, filterTestIndex } ::= { filterTestTable 1 } FilterTestEntry ::= SEQUENCE { filterTestModule INTEGER, filterTestPort INTEGER, filterTestIndex INTEGER, filterTestType INTEGER, filterTestOffset INTEGER, filterTestValue INTEGER, filterTestMask INTEGER } filterTestModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { filterTestEntry 1 } filterTestPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { filterTestEntry 2 } filterTestIndex OBJECT-TYPE SYNTAX INTEGER (1..8) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies a test for a particular module/port." ::= { filterTestEntry 3 } filterTestType OBJECT-TYPE SYNTAX INTEGER { valid(1), -- add this entry invalid(2) -- remove this entry } MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this object to invalid(2) removes the corresponding entry from the filterTestTable. To add a new entry to the filterTestTable, set this object to valid(1) for a module, port, and test index not already in the table." ::= { filterTestEntry 4 } filterTestOffset OBJECT-TYPE SYNTAX INTEGER (0..4500) MAX-ACCESS read-create STATUS current DESCRIPTION "A byte offset into packet. Must be a 32-bit word aligned offset, i.e. 0, 4, 8, etc." ::= { filterTestEntry 5 } filterTestValue OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit value to be compared against the packet location specified by filterTestOffset." ::= { filterTestEntry 6 } filterTestMask OBJECT-TYPE SYNTAX INTEGER (0..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit value to be bitwise ANDed with the packet location specified by filterTestOffset before being compared to filterTestValue." ::= { filterTestEntry 7 } -- the filter port table filterPortTable OBJECT-TYPE SYNTAX SEQUENCE OF FilterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filter port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module." ::= { filterGrp 5 } filterPortEntry OBJECT-TYPE SYNTAX FilterPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing filter information for a particular port on a module." INDEX { filterPortModule, filterPort } ::= { filterPortTable 1 } FilterPortEntry ::= SEQUENCE { filterPortModule INTEGER, filterPort INTEGER, filterPortComplex DisplayString, filterPortBroadcastThrottle INTEGER, filterPortBroadcastThreshold INTEGER, filterPortBroadcastDiscards Counter32, filterPortBroadcastThresholdFraction INTEGER, filterPortSuppressionOption BITS, filterPortSuppressionViolation INTEGER } filterPortModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { filterPortEntry 1 } filterPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { filterPortEntry 2 } filterPortComplex OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-write STATUS current DESCRIPTION "A complex expression made up of the numbers 1 through 8 indicating test results from filterTestIndex and using logical operators '&' (and), '|' (or), '!' (not), and parenthesis. For example: ((1 & 2) | !3). If this complex filter matches a packet, it is dropped." ::= { filterPortEntry 3 } filterPortBroadcastThrottle OBJECT-TYPE SYNTAX INTEGER (0..150000) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number of broadcast packets per second allowed on this port. If the number of incoming broadcast packets in a one second interval exceeds this amount, packets are dropped for the rest of the interval. If the capability exists, only broadcast packets should be dropped. Otherwise, all packets are dropped during the suppression interval. A value of 0 indicates broadcast packets should not be limited. The ability to suppress broadcast packets in this manner exists only on certain ports. If it does not exist on this port, attempts to write a value other than 0 are rejected. This object also applies to multicast (and/or) unicast suppression when filterPortSuppressionOption is enabled." DEFVAL { 0 } ::= { filterPortEntry 4 } filterPortBroadcastThreshold OBJECT-TYPE SYNTAX INTEGER (0..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the integer part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. The associated object filterPortBroadcastThresholdFraction indicates the fraction part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. Either packets of the specific traffic types are dropped of the port is put into errdisable state depending on the value of filterPortSuppressionViolation on this port if the percentage of incoming traffic of the specific traffic types would exceed this limit. The traffic types that are enabled for this traffic suppression feature is indicated by filterPortBroadcastOption. The maximum percentage for the combination of this object value and the object value of filterPortBroadcastThresholdFraction is 100.00 which indicates traffic of all traffic types should not be limited. The ability to suppress traffic in this manner exists only on certain ports. If it does not exist on this port, attempts to write a value of this object other than 100 are rejected. On platforms where filterPortSuppressionOption object is not supported, this object only applies to broadcast suppression." DEFVAL { 100 } ::= { filterPortEntry 5 } filterPortBroadcastDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of packets discarded due to traffic suppression on this port." ::= { filterPortEntry 6 } filterPortBroadcastThresholdFraction OBJECT-TYPE SYNTAX INTEGER (0..99) UNITS "one-hundredths" MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the fraction part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. The associated object filterPortBroadcastThreshold indicates the integer part of the maximum percentage of available bandwidth allowed for incoming traffic of the specific traffic types on this port. Either packets of the specific traffic types are dropped or the port is put into errdisable state depending on the value of filterPortSuppressionViolation on this port if the percentage of incoming traffic of the specific traffic type would exceed this limit. The traffic types that are enabled for this traffic suppression feature is indicated by filterPortBroadcastOption. The maximum percentage for the combination of this object value and the object value of filterPortBroadcastThreshold is 100.00 which indicates traffic of all traffic types should not be limited. The ability to suppress traffic in this manner exists only on certain ports. If it does not exist on this port, attempts to write a value of this object other than 100 are rejected. On platforms where filterPortSuppressionOption object is not supported, this object only applies to broadcast suppression." DEFVAL { 0 } ::= { filterPortEntry 7 } filterPortSuppressionOption OBJECT-TYPE -- SYNTAX OCTET STRING SYNTAX BITS { multicast(0), unicast(1), broadcast(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the traffic types that traffic suppression feature is enabled for. multicast(0) is set when multicast suppression is enabled. unicast(1) is set when unicast suppression is enabled. broadcast(2) is set when broadcast suppression is enabled." ::= { filterPortEntry 8 } filterPortSuppressionViolation OBJECT-TYPE SYNTAX INTEGER { dropPackets(1), errdisable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the action that will be taken on this port when the percentage of either broadcast, multicast or unicast traffic exceeds the limit as indicated by filterPortBroadcastThreshold and filterPortBroadcastThresholdFraction. dropPackets - the excessive packets will be - dropped on this port. errdisable - the port will be put into errdisable - state. The object is only supported on platforms that support this suppression violation action feature." ::= { filterPortEntry 9 } -- the monitor group -- Implementation of the monitor group is current for all Cisco -- Workgroup Stack products which implement port monitoring functions. -- -- The monitorGrp is deprecated and replaced by -- portCopyTable defined in SMON-MIB. monitorSourceModule OBJECT-TYPE SYNTAX INTEGER (0..16) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "An index value that uniquely identifies the module where the monitoring source port is located. A value of 0 indicates that the monitorSourcePort is really a source Virtual LAN number. To monitor multiple source ports, this object should be set to 0 and monitorAdminSourcePorts should be configured." ::= { monitorGrp 1 } monitorSourcePort OBJECT-TYPE SYNTAX INTEGER (0..1023) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "An index value that uniquely identifies the monitoring source port within a module or the monitoring source Virtual LAN. To monitor multiple source ports, this object should be set to 0 and monitorAdminSourcePorts should be configured" ::= { monitorGrp 2 } monitorDestinationModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "An index value that uniquely identifies the module where the monitoring destination port is located." ::= { monitorGrp 3 } monitorDestinationPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "An index value that uniquely identifies the monitoring destination port within a module." ::= { monitorGrp 4 } monitorDirection OBJECT-TYPE SYNTAX INTEGER { transmit(1), receive(2), transmitAndReceive(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The type of packets to be monitored at the source port." DEFVAL { transmitAndReceive } ::= { monitorGrp 5 } monitorEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether port monitoring is in progress." DEFVAL { disabled } ::= { monitorGrp 6 } monitorAdminSourcePorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates the administrative status of which ports are monitored. All the monitored ports have to be non-trunking port and belong to the same Virtual LAN. The octet string contains one bit per port. Each bit within the octet string represents one port of the device. The ordering of ports represented within the octet string is in the same order as in the RFC 1493 dot1dStpPortTable. The bit value interpretation is as follows: 1 = being monitored 0 = not being monitored" ::= { monitorGrp 7 } monitorOperSourcePorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates which ports are actually being monitored. All the monitored ports have to be non-trunking port and belong to the same Virtual LAN. The octet string contains one bit per port. Each bit within the octet string represents one port of the device. The ordering of ports represented within the octet string is in the same order as in the RFC 1493 dot1dStpPortTable. The bit value interpretation is as follows: 1 = being monitored 0 = not being monitored" ::= { monitorGrp 8 } -- the VLAN group -- the vlan table vlanTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of Virtual LAN entries. The number of entries is determined by the number of VLANs supported by the system." ::= { vlanGrp 2 } vlanEntry OBJECT-TYPE SYNTAX VlanEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entry containing information for a particular Virtual LAN." INDEX { vlanIndex } ::= { vlanTable 1 } VlanEntry ::= SEQUENCE { vlanIndex VlanIndex, vlanSpantreeEnable INTEGER, vlanIfIndex INTEGER } vlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS deprecated DESCRIPTION "An index value that uniquely identifies the Virtual LAN associated with this information." ::= { vlanEntry 1 } vlanSpantreeEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), notApplicable(3) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether Spanning Tree protocol is enabled for this Virtual LAN. If the device only supports a single global Spanning Tree PVST+ Protocol enable/disable for all the existing VLANs, then the object value assigned to this VLAN will be applied to the object values of all the instances in this table which do not have the value of notApplicable(3). This object is deprecated and replaced by stpxPVSTVlanEnable in CISCO-STP-EXTENSIONS-MIB." DEFVAL { enabled } ::= { vlanEntry 2 } vlanIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of the ifIndex object defined in MIB-II, for the interface corresponding to this VLAN. This object is deprecated and replaced by vtpVlanIfIndex in CISCO-VTP-MIB." ::= { vlanEntry 3 } -- the vlan port table vlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of Virtual LAN port entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module." ::= { vlanGrp 3 } vlanPortEntry OBJECT-TYPE SYNTAX VlanPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing Virtual LAN information for a particular port on a module." INDEX { vlanPortModule, vlanPort } ::= { vlanPortTable 1 } VlanPortEntry ::= SEQUENCE { vlanPortModule INTEGER, vlanPort INTEGER, vlanPortVlan VlanIndex, vlanPortIslVlansAllowed OCTET STRING, vlanPortSwitchLevel INTEGER, vlanPortIslAdminStatus INTEGER, vlanPortIslOperStatus INTEGER, vlanPortIslPriorityVlans OCTET STRING, vlanPortAdminStatus INTEGER, vlanPortOperStatus INTEGER, vlanPortAuxiliaryVlan INTEGER } vlanPortModule OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { vlanPortEntry 1 } vlanPort OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { vlanPortEntry 2 } vlanPortVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-write STATUS current DESCRIPTION "The Virtual LAN to which this port belongs." ::= { vlanPortEntry 3 } -- vlanPortEntry 4 is not used vlanPortIslVlansAllowed OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of which Virtual LANs are allowed on this Inter-Switch Link. This is an octet string value with bits set to indicate allowed VLANs. It can be interpreted as a sum of f(x) as x goes from 0 to 1023, where f(x) = 0 for VLAN x not allowed and f(x) = exp(2, x) for VLAN x allowed." ::= { vlanPortEntry 5 } vlanPortSwitchLevel OBJECT-TYPE SYNTAX INTEGER { normal(1), high(2), notApplicable(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the priority level the port uses to access the switching media. If vlanPortSwitchLevel is not applicable to the port, notApplicable(3) will be returned by the device." DEFVAL { normal } ::= { vlanPortEntry 6 } vlanPortIslAdminStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), desirable(3), auto(4), onNoNegotiate(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the administrative status set on the trunk port while the operational status is the one that indicates whether the port is actually trunking or not. If the status is set to off(2), the port is permanently set to be a non-trunk. If the status is set to onNoNegotiate(5), the port is permanently set to be a trunk and no negotiation takes place with the far end to try to ensure consistent operation. If the status is set to on(1), the port initiates a request to become a trunk and will become a trunk regardless of the response from the far end. If the status is set to desirable(3), the port initiates a request to become a trunk and will become a trunk if the far end agrees. If the status is set to auto(4), the port does not initiate a request to become a trunk but will do so if it receives a request to become a trunk from the far end." ::= { vlanPortEntry 7 } vlanPortIslOperStatus OBJECT-TYPE SYNTAX INTEGER { trunking(1), notTrunking(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the port is actually trunking or not. In the case of ISL capable ports, the status depends on the success or failure of the negotiation process initiated by the port to become a trunk or non trunk. In the case of 802.10 capable ports, it is directly related to the on/off administrative status." ::= { vlanPortEntry 8 } vlanPortIslPriorityVlans OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "An indication of which Virtual LANs have a better dot1dStpPortPriority value. This object can be used to perform load balancing on Inter-Switch Links via spanning tree. An Inter-Switch Link has two dot1dStpPortPriority values which are shared by all the Virtual LANs on the link. The Virtual LANs indicated by this object have priority over the other Virtual LANs on the link. This is an octet string value with bits set to indicate priority VLANs. It can be interpreted as a sum of f(x) as x goes from 0 to 1023, where f(x) = 0 for a VLAN x which does not have priority and f(x) = exp(2, x) for a VLAN x which has priority. Setting the dot1dStpPortPriority value for any of the Virtual LANs indicated by this object causes the dot1dStpPortPriority value for all the Virtual LANs indicated by this object to be set to the same value. Setting the dot1dStpPortPriority value for any other Virtual LAN causes the dot1dStpPortPriority value for all other Virtual LANs to be set to the same value." ::= { vlanPortEntry 9 } vlanPortAdminStatus OBJECT-TYPE SYNTAX INTEGER { static(1), dynamic(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the port will get assigned to a VLAN statically or dynamically. When it is set to dynamic, the needed information will be accessed from one of the Vlan Membership Policy Servers specified in the vmpsTable. Default value is static(1). Note that vlanPortAdminStatus cannot be set to dynamic(2) for a port which has portSecurityAdminStatus set to enabled(1) or for a port which currently has a vlanPortIslOperStatus of trunking(1)." DEFVAL { static } ::= { vlanPortEntry 10 } vlanPortOperStatus OBJECT-TYPE SYNTAX INTEGER { inactive(1), active(2), shutdown(3), vlanActiveFault(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of the current VLAN status of the port. A status of inactive(1) indicates that a dynamic port does not yet have a VLAN assigned or that a static or dynamic port has been assigned a VLAN that is not currently active. A status of active(2) indicates that the currently assigned VLAN is active. A status of shutdown(3) indicates that the port has been shutdown as a result of a VMPS response on a dynamic port. A status of vlanActiveFault(4) only applies to tokenring ports and indicates that the port is operationally disabled because the TR-CRF VLAN of which the port is a member has active ports on another device and only ports on that remote device may participate in that TR-CRF VLAN." ::= { vlanPortEntry 11 } vlanPortAuxiliaryVlan OBJECT-TYPE SYNTAX INTEGER ( 0|1..1000|1025..4094|4095|4096 ) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The Voice Virtual Vlan ID (VVID) to which this port belongs to. If the VVID is not supported on the port, this MIB object will not be configurable and will return 4096. Setting this MIB object to 4096, the CDP packets transmitting through this port would not include Appliance VLAN-ID TLV. Setting this MIB object to 4095, the CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 4095 - VoIP and related packets are expected to be sent and received untagged without an 802.1p priority. Setting this MIB object to 0, the CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with value of 0 - VoIP and related packets are expected to be sent and received with VLAN-id=0 and an 802.1p priority. Setting this MIB object to N (1..1000|1025..4094), the CDP packets transmitting through this port would contain Appliance VLAN-ID TLV with N - VoIP and related packets are expected to be sent and received with VLAN-id=N and an 802.1p priority. This object is deprecated and replaced by vmVoiceVlanId in CISCO-VLAN-MEMBERSHIP-MIB." ::= { vlanPortEntry 12 } -- the Vlan Membership Policy Server table vmpsTable OBJECT-TYPE SYNTAX SEQUENCE OF VmpsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a maximum of 3 IP addresses of Vlan Membership Policy Servers." ::= { vlanGrp 4 } vmpsEntry OBJECT-TYPE SYNTAX VmpsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VMPS table entry." INDEX { vmpsAddr } ::= { vmpsTable 1 } VmpsEntry ::= SEQUENCE { vmpsAddr IpAddress, vmpsType INTEGER } vmpsAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a Vlan Membership Policy Server. To configure the internal VMPS, use the same IP address as specified in sysIpAddr." ::= { vmpsEntry 1 } vmpsType OBJECT-TYPE SYNTAX INTEGER { invalid(1), -- remove this entry primary(2), -- the primary entry other(3) -- a lower priority entry } MAX-ACCESS read-create STATUS current DESCRIPTION "To add a new entry to the vmpsTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise one of the other entries will be used. Setting one entry to primary(2) causes any previous primary entry to change to other(3). To remove an entry from the table, set this object to invalid(1)." ::= { vmpsEntry 2 } vmpsAction OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of following (read-only) inProgress(2), -- (read-only) success(3), -- (read-only) noResponse(4), -- (read-only) noPrimaryVmps(5), -- No VMPS configured (read-only) noDynamicPort(6), -- No dynamic ports configured -- (read-only) noHostConnected(7), -- No hosts on dynamic ports -- (read-only) reconfirm(8) -- (write-only) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object, when read, returns the result of the last action requested: other(1), inProgress(2), success(3), noResponse(3), noPrimaryVmps(5), noDynamicPort(6), or noHostConnected(7). Setting this object to reconfirm(8) causes the switch to contact the Vlan Membership Policy Server immediately to reconfirm the current VLAN assignments for all dynamic ports on the switch. Normally VLAN assignments for dynamic ports are reconfirmed once an hour." ::= { vlanGrp 5 } vmpsAccessed OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of the last Vlan Membership Policy Server accessed. If there was no response from the last VMPS request, the value returned is 0." ::= { vlanGrp 6 } -- trunk VLAN mapping table vlanTrunkMappingMax OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "entries" MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of active configurable trunk VLAN mapping entries allowed. A value of zero indicates no limitation on the number of active configurable trunk VLAN mapping." ::= { vlanGrp 7 } vlanTrunkMappingTable OBJECT-TYPE SYNTAX SEQUENCE OF VlanTrunkMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains zero or more rows of trunk VLAN to VLAN associations. The maximum number of active entries is determined by vlanTrunkMappingMax. VLAN above 1k can not be created if the value of corresponding instance of vlanTrunkMappingType is dot1qToisl(2)." ::= { vlanGrp 8 } vlanTrunkMappingEntry OBJECT-TYPE SYNTAX VlanTrunkMappingEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Information about the VLAN mapping of a particular trunk VLAN to another VLAN." INDEX { vlanTrunkMappingFromVlan } ::= { vlanTrunkMappingTable 1 } VlanTrunkMappingEntry ::= SEQUENCE { vlanTrunkMappingFromVlan VlanIndex, vlanTrunkMappingToVlan VlanIndex, vlanTrunkMappingType INTEGER, vlanTrunkMappingOper TruthValue, vlanTrunkMappingStatus RowStatus } vlanTrunkMappingFromVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN with this VLAN ID will be mapped to the VLAN in the corresponding instance of vlanTrunkMappingToVlan in the device. Agent returns inconsistentValue if this VLAN exists in the device. Agent returns inconsistentValue if this VLAN is not a reserved VLAN and the value of corresponding instance of vlanTrunkMappingType is reservedToNonReserved(1). Agent returns wrongValue if this VLAN is not a valid 802.1Q VLAN and the value of corresponding instance of vlanTrunkMappingType is dot1qToisl(2)." ::= { vlanTrunkMappingEntry 1 } vlanTrunkMappingToVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN which the corresponding instance of vlanTrunkMappingFromVlan will be mapped to. Agent returns inconsistentValue if this VLAN exists in the device. Agent returns inconsistentValue if this VLAN is a reserved VLAN and the value of corresponding instance of vlanTrunkMappingType is reservedToNonReserved(1). Agent returns inconsistentValue if this VLAN is not a valid ISL VLAN and the value of corresponding instance of vlanTrunkMappingType is dot1qToisl(2)." ::= { vlanTrunkMappingEntry 2 } vlanTrunkMappingType OBJECT-TYPE SYNTAX INTEGER { reservedToNonReserved(1), dot1qToisl(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The type of this trunk VLAN mapping. reservedToNonReserved(1) An user defined association which maps a reserved VLAN to a non-reserved VLAN. dot1qToisl(2) An user defined association which maps a VLAN in 802.1q trunk to a VLAN in ISL trunk. Implementations are allowed to restrict the available types for this object. For devices which support the range of VlanIndex between 1024 and 4095, the default value is reservedToNonReserved(1). The default value is dot1qToisl(2) for devices which do not support the range of VlanIndex between 1024 and 4095." ::= { vlanTrunkMappingEntry 3 } vlanTrunkMappingOper OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether this VLAN mapping is effective or not." ::= { vlanTrunkMappingEntry 4 } vlanTrunkMappingStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this trunk VLAN mapping. Once a row becomes active, value in any other column within such row cannot be modified except by setting vlanTrunkMappingStatus to notInService(2) for such row." ::= { vlanTrunkMappingEntry 5 } -- the security group -- Implementation of the security group is optional, but within the -- group all the elements are current. If the Security feature is -- implemented, the entire group should be implemented. -- the port security table portSecurityTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port security entries. The number of entries is determined by the number of ports in the system which support the Security feature." ::= { securityGrp 1 } portSecurityEntry OBJECT-TYPE SYNTAX PortSecurityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing security information for a particular port." INDEX { portSecurityModuleIndex, portSecurityPortIndex } ::= { portSecurityTable 1 } PortSecurityEntry ::= SEQUENCE { portSecurityModuleIndex INTEGER, portSecurityPortIndex INTEGER, portSecurityAdminStatus INTEGER, portSecurityOperStatus INTEGER, portSecurityLastSrcAddr OCTET STRING, portSecuritySecureSrcAddr OCTET STRING, portSecurityMaxSrcAddr INTEGER, portSecurityAgingTime INTEGER, portSecurityShutdownTimeOut INTEGER, portSecurityViolationPolicy INTEGER } portSecurityModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { portSecurityEntry 1 } portSecurityPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { portSecurityEntry 2 } portSecurityAdminStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When security is enabled, source MAC addresses are monitored for all packets received on the port. If an address is detected that does not match the portSecuritySecureSrcAddr and any corresponding portSecurityExtSecureSrcAddr, of which portSecurityExtModuleIndex and portSecurityExtPortIndex in the portSecurityExtTable is the same as the portSecurityModuleIndex and portSecurityPortIndex, and the number of MAC address learned or configured for this port is equal to portSecurityMaxSrcAddr, the port will shutdown or drop packets. If the portSecurityViolationPolicy is set to shutdown(2), the port is shutdown and a linkDown trap is sent; otherwise the port drops the invalid packets." DEFVAL { disabled } ::= { portSecurityEntry 3 } portSecurityOperStatus OBJECT-TYPE SYNTAX INTEGER { notShutdown(1), shutdown(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether the port has been shut down as a result of an insecure address being detected on a secure port." ::= { portSecurityEntry 4 } portSecurityLastSrcAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The last source MAC address in a receive packet seen on the port." ::= { portSecurityEntry 5 } portSecuritySecureSrcAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-write STATUS current DESCRIPTION "The address to be compared with source MAC addresses of received packets when the portSecurityAdminStatus is enabled(1). Setting this value to 0.0.0.0.0.0 puts the port in learning mode so that the next source MAC address received by the port becomes the portSecuritySecureSrcAddr." ::= { portSecurityEntry 6 } portSecurityMaxSrcAddr OBJECT-TYPE SYNTAX INTEGER(1..1025) MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum number (N) of MAC address to be secured on the port. The first N MAC addresses learned or configured are made secured. If the user wants to make the port secured for more than one MAC address, the portSecurityExtTable is used in addition to portSecuritySecureSrcAddr. If changing the maximum number N of Mac address to M, which is smaller than N, some MAC addresses are removed. Setting this value to 1, the portSecurityExtTable will not be used for this port and the corresponding entries for this port will also be removed from portSecurityExtTable." DEFVAL { 1 } ::= { portSecurityEntry 7 } portSecurityAgingTime OBJECT-TYPE SYNTAX INTEGER(0|10..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in which the port is secured. After the expiration of the time, the corresponding portSecuritySecureSrcAddr or portSecurityExtSecureSrcAddr will be removed from the secure address list. If the value of this object is 0, the aging mechanism is disabled." DEFVAL { 0 } ::= {portSecurityEntry 8} portSecurityShutdownTimeOut OBJECT-TYPE SYNTAX INTEGER(0|10..1440) UNITS "minutes" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval in which the port is shutdown due to the violation of security. After the expiration of the time all the security configuration of this port is re-installed and the port is enabled. If the value of this object is 0, the port is shut down permanently." DEFVAL { 0 } ::= {portSecurityEntry 9} portSecurityViolationPolicy OBJECT-TYPE SYNTAX INTEGER { restrict(1), shutdown(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "If the value of this object is restrict(1) - the port drops all packets with insecured addresses. shutdown(2) - the port is forced to shut down if there is a violation of security." DEFVAL { shutdown } ::= {portSecurityEntry 10} -- the port security extension table. This table will be used if -- the portSecurityMaxSrcAddr for any port is set to value that is -- greater than 1. portSecurityExtTable OBJECT-TYPE SYNTAX SEQUENCE OF PortSecurityExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port security entries. The number of entries is determined by the number of ports in the system which support the Security feature and the number of MAC addresses learned/configured to be secured per port." ::= { securityGrp 2 } portSecurityExtEntry OBJECT-TYPE SYNTAX PortSecurityExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing security information for a particular port and a particular MAC address. The entry can be configured by the user and can be added by the agent when the device learns a new secured MAC address." INDEX { portSecurityExtModuleIndex, portSecurityExtPortIndex, portSecurityExtSecureSrcAddr } ::= { portSecurityExtTable 1 } PortSecurityExtEntry ::= SEQUENCE { portSecurityExtModuleIndex INTEGER, portSecurityExtPortIndex INTEGER, portSecurityExtSecureSrcAddr OCTET STRING, portSecurityExtControlStatus INTEGER } portSecurityExtModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { portSecurityExtEntry 1 } portSecurityExtPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { portSecurityExtEntry 2 } portSecurityExtSecureSrcAddr OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the MAC address, which is to be secured." ::= { portSecurityExtEntry 3} portSecurityExtControlStatus OBJECT-TYPE SYNTAX INTEGER { valid(1), invalid(2)} MAX-ACCESS read-create STATUS current DESCRIPTION "This object used to add or remove a secured MAC address of the corresponding port in the row. If setting this object to valid(1), the portSecurityExtSecureSrcAddr is made to be secured for the port. If setting this object to invalid(2), the portSecurityExtSecureSrcAddr is no longer to be secured for the current port." ::= {portSecurityExtEntry 4} -- the token ring group -- Implementation of the token ring group is current for all Cisco -- Workgroup Stack products which implement token ring functions -- (wsx5030 and wsx5031). -- Token Ring Port Configuration Table tokenRingPortTable OBJECT-TYPE SYNTAX SEQUENCE OF TokenRingPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing token ring configuration information." ::= { tokenRingGrp 1 } tokenRingPortEntry OBJECT-TYPE SYNTAX TokenRingPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing token ring configuration information for a particular port." INDEX { tokenRingModuleIndex, tokenRingPortIndex } ::= { tokenRingPortTable 1 } TokenRingPortEntry ::= SEQUENCE { tokenRingModuleIndex INTEGER, tokenRingPortIndex INTEGER, tokenRingPortSetACbits INTEGER, tokenRingPortMode INTEGER, tokenRingPortEarlyTokenRel INTEGER, tokenRingPortPriorityThresh INTEGER, tokenRingPortPriorityMinXmit INTEGER, tokenRingPortCfgLossThresh INTEGER, tokenRingPortCfgLossInterval INTEGER } tokenRingModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { tokenRingPortEntry 1 } tokenRingPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { tokenRingPortEntry 2 } tokenRingPortSetACbits OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if the AC bits shall be set unconditionally when a port forwards certain LLC frames." DEFVAL { disabled } ::= { tokenRingPortEntry 3 } tokenRingPortMode OBJECT-TYPE SYNTAX INTEGER { auto(1), fdxCport(2), fdxStation(3), hdxCport(4), hdxStation(5), riro(7) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the port's mode of operation. auto: Automatically detect the port mode upon insertion. fdxCport: Transmit Immediate (full-duplex) Concentrator Port fdxStation: Transmit Immediate (full-duplex) Station emulation hdxCport: Token Passing Protocol (half-duplex) Concentrator Port hdxStation: Token Passing Protocol (half-duplex) Station emulation riro: RingIn/RingOut mode. (wsx5031 only)" DEFVAL { auto } ::= { tokenRingPortEntry 4 } -- tokenRingPortEntry 5 to 8 are not used tokenRingPortEarlyTokenRel OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the ability to enable or disable early token release for a particular port. Early token release only applies to ports operating at 16 Mbps. If ifSpeed reflects 4 Mbps for a particular port, then the corresponding instance of this object will have a value of disabled(2) regardless of attempts to set the object to enabled(1). Whenever a port is opened with a ring speed of 16 Mbps, by default, early token release will be enabled." ::= { tokenRingPortEntry 9 } tokenRingPortPriorityThresh OBJECT-TYPE SYNTAX INTEGER (0..7) MAX-ACCESS read-write STATUS current DESCRIPTION "The highest token ring frame priority that shall go to the low-priority transmit queue." DEFVAL { 3 } ::= { tokenRingPortEntry 10 } tokenRingPortPriorityMinXmit OBJECT-TYPE SYNTAX INTEGER (0..6) MAX-ACCESS read-write STATUS current DESCRIPTION "The minimum token priority that will be used for transmit." DEFVAL { 4 } ::= { tokenRingPortEntry 11 } tokenRingPortCfgLossThresh OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Number of configuration loss events during the sample interval which, if exceeded, should cause the port to be disabled. If the port is disabled by this function the port must be administratively re-enabled." DEFVAL { 8 } ::= { tokenRingPortEntry 12 } tokenRingPortCfgLossInterval OBJECT-TYPE SYNTAX INTEGER (1..9999) MAX-ACCESS read-write STATUS current DESCRIPTION "The sampling interval, in minutes, for which the port monitors to see if the configuration loss threshold has been exceeded." DEFVAL { 10 } ::= { tokenRingPortEntry 13 } -- DRiP related objects. tokenRingDripDistCrfMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object reflects whether TR-CRFs can be distributed across ISL topologies. Setting this object to enabled(1) allows TR-CRFs to be distributed. Setting this object to disabled(2) prevents TR-CRFs from being distributed across ISL topologies. When this object is set to disabled(2), the system will disable ports involved in the distributed TR-CRF." DEFVAL { disabled } ::= { tokenRingGrp 2 } tokenRingDripAreReductionMode OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object reflects whether or not All Routes Explorer (ARE) reduction capabilities are enabled or disabled on this system. Setting this object to enabled(1) will permit DRiP to participate in the configuration of Token Ring ports ARE reduction capabilities on the system. Setting this object to disabled(2) will prevent DRiP from participating in the configuration of Token Ring port ARE reduction capabilities." DEFVAL { enabled } ::= { tokenRingGrp 3 } tokenRingDripLocalNodeID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique system identifier that will be sent in all advertisements generated by this system. It uniquely identifies this system from other DRiP capable systems." ::= { tokenRingGrp 4 } tokenRingDripLastRevision OBJECT-TYPE SYNTAX INTEGER (0..9999999) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision number transmitted in the most recent advertisement. That advertisement may or may not have contained changed data." ::= { tokenRingGrp 5 } tokenRingDripLastChangedRevision OBJECT-TYPE SYNTAX INTEGER (0..9999999) MAX-ACCESS read-only STATUS current DESCRIPTION "The revision number transmitted in the most recent advertisement containing changed data." ::= { tokenRingGrp 6 } tokenRingDripAdvertsReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DRiP advertisements received by this system." ::= { tokenRingGrp 7 } tokenRingDripAdvertsTransmitted OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DRiP advertisements transmitted by this system." ::= { tokenRingGrp 8 } tokenRingDripAdvertsProcessed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DRiP advertisements processed by this system." ::= { tokenRingGrp 9 } tokenRingDripInputQueueDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DRiP advertisements dropped from this system's input queue." ::= { tokenRingGrp 10 } tokenRingDripOutputQueueDrops OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of DRiP advertisements dropped from this system's output queue." ::= { tokenRingGrp 11 } tokenRingDripLocalVlanStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TokenRingDripLocalVlanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing DRiP VLAN status information local to this system. The existence of an entry indicates that at least one local port is assigned to the associated TR-CRF VLAN." ::= { tokenRingGrp 12 } tokenRingDripLocalVlanStatusEntry OBJECT-TYPE SYNTAX TokenRingDripLocalVlanStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing DRiP related information for a particular TR-CRF VLAN." INDEX { tokenRingDripVlan } ::= { tokenRingDripLocalVlanStatusTable 1 } TokenRingDripLocalVlanStatusEntry ::= SEQUENCE { tokenRingDripVlan VlanIndex, tokenRingDripLocalPortStatus INTEGER, tokenRingDripRemotePortStatus INTEGER, tokenRingDripRemotePortConfigured INTEGER, tokenRingDripDistributedCrf INTEGER, tokenRingDripBackupCrf INTEGER, tokenRingDripOwnerNodeID OCTET STRING } tokenRingDripVlan OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "A TR-CRF VLAN ID." ::= { tokenRingDripLocalVlanStatusEntry 1 } tokenRingDripLocalPortStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects DRiP's status regarding the overall set of local ports assigned to the TR-CRF VLAN associated with this entry. A value of active(1) indicates that at least one local port is inserted/connected (i.e., active on the Token Ring). A value of inactive(2) indicates that none of the local ports are inserted/connected. All local ports are either disabled or are simply not connected." ::= { tokenRingDripLocalVlanStatusEntry 2 } tokenRingDripRemotePortStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects DRiP's status regarding any ports on remote systems. A value of active(1) indicates that at least one remote port is inserted/connected (i.e., active on the Token Ring). A value of inactive(2) indicates that none of the remote ports are inserted/connected. All remote ports are either disabled or are simply not connected." ::= { tokenRingDripLocalVlanStatusEntry 3 } tokenRingDripRemotePortConfigured OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects whether or not DRiP has detected remote ports assigned to the TR-CRF VLAN associated with this entry. A value of true(1) indicates there is at least one port on a remote system assigned to this TR-CRF VLAN. A value of false(2) indicates no remote ports are assigned to this TR-CRF VLAN." ::= { tokenRingDripLocalVlanStatusEntry 4 } tokenRingDripDistributedCrf OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects whether DRiP considers the TR-CRF VLAN associated with this entry to be distributed across systems. A value of true(1) indicates the TR-CRF is distributed. A value of false(2) indicates the TR-CRF is not distributed." ::= { tokenRingDripLocalVlanStatusEntry 5 } tokenRingDripBackupCrf OBJECT-TYPE SYNTAX INTEGER { true(1), false(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object reflects whether or not the TR-CRF VLAN associated with this entry is configured as a backup TR-CRF. A value of true(1) indicates the TR-CRF is a configured as a backup. A value of false(2) indicates the TR-CRF is not configured as a backup." ::= { tokenRingDripLocalVlanStatusEntry 6 } tokenRingDripOwnerNodeID OBJECT-TYPE SYNTAX OCTET STRING (SIZE(6)) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique identifier of the system that has advertised that it has local ports assigned to the TR-CRF VLAN associated with this entry." ::= { tokenRingDripLocalVlanStatusEntry 7 } -- Token Ring Port Soft Error Monitoring Configuration Table tokenRingPortSoftErrTable OBJECT-TYPE SYNTAX SEQUENCE OF TokenRingPortSoftErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Table containing token ring soft error monitoring configuration information." ::= { tokenRingGrp 14 } tokenRingPortSoftErrEntry OBJECT-TYPE SYNTAX TokenRingPortSoftErrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing token ring soft error monitoring configuration information for a particular port." AUGMENTS { tokenRingPortEntry } ::= { tokenRingPortSoftErrTable 1 } TokenRingPortSoftErrEntry ::= SEQUENCE { tokenRingPortSoftErrThresh INTEGER, tokenRingPortSoftErrReportInterval INTEGER, tokenRingPortSoftErrResetCounters INTEGER, tokenRingPortSoftErrLastCounterReset TimeTicks, tokenRingPortSoftErrEnable INTEGER } tokenRingPortSoftErrThresh OBJECT-TYPE SYNTAX INTEGER ( 1..255 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The number of soft errors reported from a station connected to this port which, if exceeded, should cause a soft error exceeded trap to be issued. The error counters being monitored and compared to this threshold value are all of the error counters in the ringStationTable (see RFC 1513)." DEFVAL { 100 } ::= { tokenRingPortSoftErrEntry 1 } tokenRingPortSoftErrReportInterval OBJECT-TYPE SYNTAX INTEGER ( 0..65535 ) MAX-ACCESS read-write STATUS current DESCRIPTION "The sampling period, in seconds, in which each station connected to this port will be monitored for excessive soft error reports. If a station reports more than tokenRingPortSoftErrThreshold errors within the sampling period a trap will be issued to the management station(s). Setting a value of 0 will cause no traps to be sent for this port." DEFVAL { 60 } ::= { tokenRingPortSoftErrEntry 2 } tokenRingPortSoftErrResetCounters OBJECT-TYPE SYNTAX INTEGER { noop(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to reset(2), all Soft Error Monitoring related counters on this port will be set to 0." ::= { tokenRingPortSoftErrEntry 3 } tokenRingPortSoftErrLastCounterReset OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since Soft Error Monitoring counters for this port were last cleared." ::= { tokenRingPortSoftErrEntry 4 } tokenRingPortSoftErrEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the Token Ring Soft Error Monitoring feature is enabled on this port or not. The detailed soft error statistics are provided by Token Ring RMON SNMP objects. Thus, if RMON (sysEnableRmon) is disabled(2) then the soft error statistics will only be available from the CLI." DEFVAL { disabled } ::= { tokenRingPortSoftErrEntry 5 } -- the multicast group -- Implementation of the multicast group is optional, but within the -- group all the elements are current. If multicast features are -- supported, the entire group should be implemented. -- the multicast router table mcastRouterTable OBJECT-TYPE SYNTAX SEQUENCE OF McastRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of multicast router port entries. The number of entries is determined by the number of ports in the system." ::= { multicastGrp 1 } mcastRouterEntry OBJECT-TYPE SYNTAX McastRouterEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing multicast router information for a particular port." INDEX { mcastRouterModuleIndex, mcastRouterPortIndex } ::= { mcastRouterTable 1 } McastRouterEntry ::= SEQUENCE { mcastRouterModuleIndex INTEGER, mcastRouterPortIndex INTEGER, mcastRouterAdminStatus INTEGER, mcastRouterOperStatus INTEGER } mcastRouterModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { mcastRouterEntry 1 } mcastRouterPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { mcastRouterEntry 2 } mcastRouterAdminStatus OBJECT-TYPE SYNTAX INTEGER { routerPresent(1), dynamic(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "And indication of whether the presence of an IP multicast router on this port is to be determined statically or dynamically. The value routerPresent(1) indicates that the presence of a router is statically configured to be present. The value dynamic(3) indicates the presence is to be learned dynamically." DEFVAL { dynamic } ::= { mcastRouterEntry 3 } mcastRouterOperStatus OBJECT-TYPE SYNTAX INTEGER { routerPresent(1), noRouter(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "An indication of whether an IP multicast router is present on this port." ::= { mcastRouterEntry 4 } mcastEnableCgmp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Cisco Group Management Protocol is enabled on the device or not. When CGMP is enabled in conjunction with Cisco routers running CGMP, only the required ports will participate in IP multicast groups." DEFVAL { disabled } ::= { multicastGrp 2 } mcastEnableIgmp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Internet Group Management Protocol is enabled on the device or not. When IGMP is enabled in conjunction with Cisco routers running CGMP, only the required ports will participate in IP multicast groups." DEFVAL { disabled } ::= { multicastGrp 3 } mcastEnableRgmp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether Router Group Management Protocol is enabled on the device or not. When RGMP is enabled in conjunction with Cisco routers running RGMP, multicast data traffic is forwarded only to those multicast routers that are interested to receive that data traffic. IGMP snooping feature must be enabled on the system to make RGMP feature operational." DEFVAL { disabled } ::= { multicastGrp 4 } -- the DNS group -- Implementation of the DNS group is optional, but within the group -- all the elements are current. If DNS features are supported, -- the entire group should be implemented. dnsEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates if the DNS feature is enabled or disabled." DEFVAL { disabled } ::= { dnsGrp 1} dnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF DnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a maximum of 3 DNS servers." ::= { dnsGrp 2 } dnsServerEntry OBJECT-TYPE SYNTAX DnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A DNS server table entry." INDEX { dnsServerAddr } ::= { dnsServerTable 1 } DnsServerEntry ::= SEQUENCE { dnsServerAddr IpAddress, dnsServerType INTEGER } dnsServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a DNS server." ::= { dnsServerEntry 1 } dnsServerType OBJECT-TYPE SYNTAX INTEGER { invalid(1), -- remove this entry primary(2), -- the primary entry other(3) -- a lower priority entry } MAX-ACCESS read-create STATUS current DESCRIPTION "To add a new entry to the dnsServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise, one of the other entries will be used. Setting one entry to primary(2) causes any previous primary entry to change to other(3). To remove an entry from the table, set this object to invalid(1)." ::= { dnsServerEntry 2 } dnsDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..127)) MAX-ACCESS read-write STATUS current DESCRIPTION "DNS domain name." REFERENCE "RFC1035, section 2.3.1 Preferred name syntax." ::= { dnsGrp 3 } -- the syslog (System Log Information) group -- Implementation of the syslog group is optional, but within the group -- all the elements are current. If the syslog feature is supported, -- the entire group should be implemented. syslogServerTable OBJECT-TYPE SYNTAX SEQUENCE OF SyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a maximum of 3 system log servers." ::= { syslogGrp 1 } syslogServerEntry OBJECT-TYPE SYNTAX SyslogServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A system log server table entry." INDEX { syslogServerAddr } ::= { syslogServerTable 1 } SyslogServerEntry ::= SEQUENCE { syslogServerAddr IpAddress, syslogServerType INTEGER } syslogServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a system log Server." ::= { syslogServerEntry 1 } syslogServerType OBJECT-TYPE SYNTAX INTEGER { valid(1), -- add this entry invalid(2) -- remove this entry } MAX-ACCESS read-create STATUS current DESCRIPTION "To add/remove a new entry to the syslogServerTable, setting to invalid(2) removes the corresponding entry from the syslogServerTable. To add a new entry into syslogServerTable, set this object to valid(1) for an IP address which is not already in the table." ::= { syslogServerEntry 2 } syslogConsoleEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate whether the system log messages should be sent to console." DEFVAL { disabled } ::= { syslogGrp 2 } syslogHostEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate whether the system log messages should be sent to syslog servers." DEFVAL { disabled } ::= { syslogGrp 3 } syslogMessageControlTable OBJECT-TYPE SYNTAX SEQUENCE OF SyslogMessageControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the information about what system log messages should be sent to syslog host, console, login session, and/or logged into the internal buffer." ::= { syslogGrp 4 } syslogMessageControlEntry OBJECT-TYPE SYNTAX SyslogMessageControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A system log message control table entry." INDEX { syslogMessageFacility } ::= { syslogMessageControlTable 1 } SyslogMessageControlEntry ::= SEQUENCE { syslogMessageFacility INTEGER, syslogMessageSeverity INTEGER } syslogMessageFacility OBJECT-TYPE SYNTAX INTEGER { cdp(1), mcast(2), dtp(3), dvlan(4), earl(5), fddi(6), ip(7), pruning(8), snmp(9), spantree(10), system(11), tac(12), tcp(13), telnet(14), tftp(15), vtp(16), vmps(17), kernel(18), filesys(19), drip(20), pagp(21), mgmt(22), mls(23), protfilt(24), security(25), radius(26), udld(27), gvrp(28), cops(29), qos(30), acl(31), rsvp(32), ld(33), privatevlan(34), ethc(35), gl2pt(36), callhome(37), dhcpsnooping(38), diags(40), eou(42), backup(43), eoam(44), webauth(45), dom(46), mvrp(47) } MAX-ACCESS read-only STATUS current DESCRIPTION "System log message facility." ::= { syslogMessageControlEntry 1 } syslogMessageSeverity OBJECT-TYPE SYNTAX INTEGER { emergencies(1), alerts(2), critical(3), errors(4), warnings(5), notification(6), informational(7), debugging(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "System log message severity." ::= { syslogMessageControlEntry 2 } syslogTimeStampOption OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether syslog Time Stamp Option is enabled or not. If it is set to enabled(1), the Time Stamp will be in the beginning of each syslog message." ::= { syslogGrp 5 } syslogTelnetEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate whether the system log messages should be sent to telnet sessions." DEFVAL { enabled } ::= { syslogGrp 6 } -- the NTP (Network Time Protocol) group -- Implementation of the NTP group is optional, but within the group -- all the elements are current. If the NTP feature is supported, -- the entire group should be implemented. -- the NTP table ntpBcastClient OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry which tells if Cat5000 should act as a Broadcast client or not." DEFVAL { disabled } ::= { ntpGrp 1 } ntpBcastDelay OBJECT-TYPE SYNTAX INTEGER (1..999999) MAX-ACCESS read-write STATUS current DESCRIPTION "Estimated Round trip time (in micro seconds) for NTP broadcasts. The range is from 1 to 999999." DEFVAL { 3000 } ::= { ntpGrp 2 } ntpClient OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Entry which tells if the device can act as a NTP client (in a client-server configuration type)." DEFVAL { disabled } ::= { ntpGrp 3 } ntpServerTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of NTP Server entries. This table lists a maximum of 10 Entries." ::= { ntpGrp 4 } ntpServerEntry OBJECT-TYPE SYNTAX NtpServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing NTP information for a particular entry." INDEX { ntpServerAddress } ::= { ntpServerTable 1 } NtpServerEntry ::= SEQUENCE { ntpServerAddress IpAddress, ntpServerType INTEGER, ntpServerPublicKey Unsigned32 } ntpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Entry containing NTP Server's IP address." ::= { ntpServerEntry 1 } ntpServerType OBJECT-TYPE SYNTAX INTEGER{ valid(1), -- add this entry invalid(2) -- remove this entry } MAX-ACCESS read-write STATUS current DESCRIPTION "To add or remove an entry to ntpServerTable. Setting to 1 adds the entry and setting to 2 clears the entry." ::= { ntpServerEntry 2 } ntpServerPublicKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The key to be used when communicating with this server. A key with a value of zero indicates an invalid ntpServerPublicKey. When the authentication feature is enabled the system will not sync with this server when ntpAuthenticationPublicKey doesn't match with NTP Packet's public key. or If the ntpAuthenticationTrustedMode is trusted but encrypted message of ntpAuthenticationSecretKey with NTP packet's data doesn't match with NTP packet's crypto checksum in the message authentication mode (MAC). or If the ntpAuthenticationTrustedMode is untrusted. In client mode NMP will not send request NTP Packet to the server when ntpServerPublicKey doesn't match with any of the ntpAuthenticationPublicKey in ntpAuthenticationTable. or If the ntpAuthenticationTrustedMode is untrusted." ::= { ntpServerEntry 3 } ntpSummertimeStatus OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Enabling or Disabling will set the clock ahead or behind 1 hour respectively.(daylight savings time in USA). This command gets active only in Summer time." DEFVAL { disabled } ::= { ntpGrp 5 } ntpSummerTimezoneName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Summertime time zone name for display purposes." ::= { ntpGrp 6 } ntpTimezoneName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) MAX-ACCESS read-write STATUS current DESCRIPTION "Time zone name for display purposes." ::= { ntpGrp 7 } ntpTimezoneOffsetHour OBJECT-TYPE SYNTAX INTEGER (-12..12) MAX-ACCESS read-write STATUS current DESCRIPTION "Time offset (Hour) from Greenwich Mean Time." ::= { ntpGrp 8 } ntpTimezoneOffsetMinute OBJECT-TYPE SYNTAX INTEGER (0..59) MAX-ACCESS read-write STATUS current DESCRIPTION "Time offset (Minutes) from Greenwich Mean Time." ::= { ntpGrp 9 } ntpAuthenticationEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies if authentication feature is enabled or disabled in the system." DEFVAL { disabled } ::= { ntpGrp 10 } ntpAuthenticationTable OBJECT-TYPE SYNTAX SEQUENCE OF NtpAuthenticationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of NTP Authentication Key entries. This table lists a maximum of 10 Entries" ::= { ntpGrp 11 } ntpAuthenticationEntry OBJECT-TYPE SYNTAX NtpAuthenticationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the ntpAuthenticationTable, containing values of an NTP authentication key pair." INDEX { ntpAuthenticationPublicKey } ::= { ntpAuthenticationTable 1 } NtpAuthenticationEntry ::= SEQUENCE { ntpAuthenticationPublicKey Unsigned32, ntpAuthenticationSecretKey DisplayString, ntpAuthenticationTrustedMode INTEGER, ntpAuthenticationType INTEGER } ntpAuthenticationPublicKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "A unique value to identify the authentication key. When the authentication feature is enabled and the ntpAuthenticationPublicKey matches with the NTP packet's public key then this entry is used." ::= { ntpAuthenticationEntry 1} ntpAuthenticationSecretKey OBJECT-TYPE SYNTAX DisplayString (SIZE (1..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "An arbitrary string known as the secret key used for encrypting of the NTP packet. This key is useful when the ntpAuthenticationTrustedMode is set to trusted(1). This key has to be specified when this ntpAuthenticationEntry is created. When reading this object, it will return empty string." ::= { ntpAuthenticationEntry 2} ntpAuthenticationTrustedMode OBJECT-TYPE SYNTAX INTEGER { trusted(1), untrusted(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "A flag indicates whether the ntpAuthenticationSecretKey is trusted or untrusted. Setting a ntpAuthenticationSecretKey to trusted(1) allows authentication on NTP packets containing this key, and setting a ntpAuthenticationSecretKey to untrusted(2) drops all NTP packets containing this key." ::= { ntpAuthenticationEntry 3} ntpAuthenticationType OBJECT-TYPE SYNTAX INTEGER { valid(1), -- add this entry invalid(2) -- remove this entry } MAX-ACCESS read-write STATUS current DESCRIPTION "To add or remove an entry to ntpAuthenticationTable. Setting to 1 adds the entry and setting to 2 clears the entry." ::= { ntpAuthenticationEntry 4} -- the TACACS (Terminal Access Controller Access Control System) group -- Implementation of the TACACS group is optional, but within the group -- all the elements are current. If the TACACS+ feature is -- implemented, the entire group should be implemented. tacacsLoginAuthentication OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForConsoleOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the login authentication using the TACACS+ feature is enabled or disabled for console sessions and/or telnet sessions. Setting this object to enabled(1), the login authentication using the TACACS+ feature is enabled for both telnet and console sessions. Setting this object to disabled(2), the login authentication using the TACACS+ feature is disabled for both telnet and console sessions. Setting this object to enabledForTelnetOnly(3), the login authentication using the TACACS+ feature is enabled only for telnet sessions, but disabled for console sessions. Setting this object to enabledForConsoleOnly(4), the login authentication using the TACACS+ feature is enabled only for console sessions, but disabled for telnet sessions. This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." DEFVAL { disabled } ::= { tacacsGrp 1 } tacacsEnableAuthentication OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForConsoleOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the enable authentication using the TACACS+ feature is enabled or disabled for console sessions and/or telnet sessions based on the value. Setting this object to enabled(1), the enable authentication using the TACACS+ feature is enabled for both telnet and console sessions. Setting this object to disabled(2), the enable authentication using the TACACS+ feature is disabled for both telnet and console sessions. Setting this object to enabledForTelnetOnly(3), the enable authentication using the TACACS+ feature is enabled only for telnet sessions, but disabled for console sessions. Setting this object to enabledForConsoleOnly(4), the enable authentication using the TACACS+ feature is enabled only for console sessions, but disabled for telnet sessions. This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." DEFVAL { disabled } ::= { tacacsGrp 2 } tacacsLocalLoginAuthentication OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForConsoleOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the login authentication using local password is enabled or disabled for Console session and/or Telnet session based on the value. Setting this object to enabled(1),the login authentication using local password is enabled for both telnet and console sessions. Setting this object to disabled(2), the login authentication using local password is disabled for both telnet and console sessions. Setting this object to enabledForTelnetOnly(3), the login authentication using local password is enabled only for telnet sessions, but disabled for console session. Setting this object to enabledForConsoleOnly(4), the login authentication using local password is enabled only for console session, but disabled for telnet sessions. This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." DEFVAL { enabled } ::= { tacacsGrp 3 } tacacsLocalEnableAuthentication OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForConsoleOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the enable authentication using local password is enabled or disabled for Console session and/or Telnet sessions. Setting this object to enabled(1),the enable authentication using local password is enabled for both telnet and console sessions. Setting this object to disabled(2), the enable authentication using local password is disabled for both telnet and console sessions. Setting this object to enabledForTelnetOnly(3), the enable authentication using local password is enabled only for telnet sessions, but disabled for console sessions. Setting this object to enabledForConsoleOnly(4), the enable authentication using local password is enabled only for console sessions, but disabled for telnet sessions. This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." DEFVAL { enabled } ::= { tacacsGrp 4 } tacacsNumLoginAttempts OBJECT-TYPE SYNTAX INTEGER (1..10) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The number of login attempts allowed. This object is deprecated and replaced by cacMaxLoginAttempt in CISCO-AAA-CLIENT-MIB." DEFVAL { 3 } ::= { tacacsGrp 5 } tacacsDirectedRequest OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether the directed-request feature of TACACS+ is enabled or disabled." DEFVAL { disabled } ::= { tacacsGrp 6 } tacacsTimeout OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The duration in seconds to wait for a response from the TACACS+ server host. This object is deprecated and replaced by cacLockoutPeriodExt in CISCO-AAA-CLIENT-MIB." DEFVAL { 5 } ::= { tacacsGrp 7 } tacacsAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..100)) MAX-ACCESS read-write STATUS current DESCRIPTION "The key used in encrypting the packets passed between the TACACS+ server and the client. This key must match the one configured on the server. Note that this item is only accessible when using the community string defined in sysCommunityRwa." -- DEFVAL { NULL } ::= { tacacsGrp 8 } tacacsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF TacacsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a maximum of 3 TACACS+ servers." ::= { tacacsGrp 9 } tacacsServerEntry OBJECT-TYPE SYNTAX TacacsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A TACACS+ server table entry." INDEX { tacacsServerAddr } ::= { tacacsServerTable 1 } TacacsServerEntry ::= SEQUENCE { tacacsServerAddr IpAddress, tacacsServerType INTEGER } tacacsServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a TACACS+ Server." ::= { tacacsServerEntry 1 } tacacsServerType OBJECT-TYPE SYNTAX INTEGER { invalid(1), -- remove this entry primary(2), -- the primary entry other(3) -- a lower priority entry } MAX-ACCESS read-create STATUS current DESCRIPTION "To add a new entry to the tacacsServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise, one of the other entries will be used. Setting one entry to primary(2) causes any previous primary entry to change to other(3). To remove an entry from the table, set this object to invalid(1)." ::= { tacacsServerEntry 2 } -- the ip permit list group -- Implementation of the ip permit list group is optional, but within -- the group all the elements are current. If the ip permit list -- feature is supported, the entire group should be implemented. ipPermitEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForSnmpOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This is deprecated and replaced by ipPermitAccessTypeEnable. Indicate whether the IP permit feature is enabled or disabled for Telnet and/or SNMP. Setting this object to enabled(1), the IP permit feature is enabled for both telnet and SNMP. Setting this object to disabled(2), the IP permit feature is disabled for both telnet and SNMP. Setting this object to enabledForTelnetOnly(3), the IP permit feature is enabled for Telnet, but disabled for the rest. Setting this object to enabledForSnmpOnly(4), the IP permit feature is enabled for SNMP, but disabled for the rest." DEFVAL { disabled } ::= { ipPermitListGrp 1 } -- the ip permit list table ipPermitListTable OBJECT-TYPE SYNTAX SEQUENCE OF IpPermitListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a maximum of 100 IP Addresses with net masks of IP permit hosts. If ipPermitEnable is set to enabled(1), the system will only accept inbound accesses which come from the configured hosts with their permit access types in this table." ::= { ipPermitListGrp 2 } ipPermitListEntry OBJECT-TYPE SYNTAX IpPermitListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A IP permit list table entry." INDEX { ipPermitAddress, ipPermitMask } ::= { ipPermitListTable 1 } IpPermitListEntry ::= SEQUENCE { ipPermitAddress IpAddress, ipPermitMask IpAddress, ipPermitType INTEGER, ipPermitAccessType BITS, ipPermitTelnetConnectLimit Unsigned32, ipPermitSshConnectLimit Unsigned32 } ipPermitAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a IP permit host." ::= { ipPermitListEntry 1 } ipPermitMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP net mask of a IP permit host." ::= { ipPermitListEntry 2 } ipPermitType OBJECT-TYPE SYNTAX INTEGER { valid(1), --add this entry invalid(2) --remove this entry } MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this object to invalid(2), removes the corresponding entry from the ipPermitListTable. To add a new entry into ipPermitListTable, set this object to valid(1), for an IP address and IP net mask which are not already in the table." ::= { ipPermitListEntry 3 } ipPermitAccessType OBJECT-TYPE SYNTAX BITS { telnet(0), snmp(1), ssh(2), http(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The IP access type of a IP permit host. At least one access type has to be set." DEFVAL {{ telnet, snmp, ssh, http }} ::= { ipPermitListEntry 4 } ipPermitTelnetConnectLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the telnet connection limit that will be applied when accepting new telnet connections for a specific host. A value of zero means no limit will be applied for telnet connections. Setting this object to a non-zero value will turn on the 'telnet' bit in the corresponding ipPermitAccessType. Turnning off the 'telnet' bit in the corresponding ipPermitAccessType will reset this ipPermitTelnetConnectLimit value to zero." DEFVAL { 0 } ::= { ipPermitListEntry 5 } ipPermitSshConnectLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Indicates the ssh connection limit that will be applied when accepting new ssh connections for a specific host. A value of zero means no limit will be applied for ssh connections. Setting this object to a non-zero value will turn on the 'ssh' bit in the corresponding ipPermitAccessType. Turnning off the 'ssh' bit in the corresponding ipPermitAccessType will reset this ipPermitSshConnectLimit value to zero." DEFVAL { 0 } ::= { ipPermitListEntry 6 } ipPermitDeniedListTable OBJECT-TYPE SYNTAX SEQUENCE OF IpPermitDeniedListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists up to 10 the most recently denied IP addresses with the access type." ::= { ipPermitListGrp 3 } ipPermitDeniedListEntry OBJECT-TYPE SYNTAX IpPermitDeniedListEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A IP permit denied list table entry." INDEX {ipPermitDeniedAddress} ::= { ipPermitDeniedListTable 1} IpPermitDeniedListEntry ::= SEQUENCE { ipPermitDeniedAddress IpAddress, ipPermitDeniedAccess INTEGER, ipPermitDeniedTime TimeTicks } ipPermitDeniedAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a IP permit denied access." ::= { ipPermitDeniedListEntry 1 } ipPermitDeniedAccess OBJECT-TYPE SYNTAX INTEGER { telnet(1), snmp(2), ssh(3), http(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The denied access type." ::= { ipPermitDeniedListEntry 2 } ipPermitDeniedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the IP permit denied access happens." ::= { ipPermitDeniedListEntry 3 } ipPermitAccessTypeEnable OBJECT-TYPE SYNTAX BITS { telnet(0), snmp(1), ssh(2), http(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This is to replace ipPermitEnable. Indicates whether the IP permit feature is enabled or disabled for Telnet, SNMP, ssh and http. If a bit is set the coresponding feature is enabled. If a bit is not set the coresponding feature is disabled." DEFVAL { { } } ::= { ipPermitListGrp 4 } -- the portChannel group -- the port channel table portChannelTable OBJECT-TYPE SYNTAX SEQUENCE OF PortChannelEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A list of port channel entries. The number of entries is determined by the number of ports in the system which support the Ethernet Channelling feature. This table is deprecated and replaced by pagpEtherChannelTable in CISCO-PAGP-MIB and dot3adAggTable in IEEE8023-LAG-MIB." ::= { portChannelGrp 1 } portChannelEntry OBJECT-TYPE SYNTAX PortChannelEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Entry containing information for a particular port on a module." INDEX { portChannelModuleIndex, portChannelPortIndex } ::= { portChannelTable 1 } PortChannelEntry ::= SEQUENCE { portChannelModuleIndex INTEGER, portChannelPortIndex INTEGER, portChannelPorts OCTET STRING, portChannelAdminStatus INTEGER, portChannelOperStatus INTEGER, portChannelNeighbourDeviceId OCTET STRING, portChannelNeighbourPortId INTEGER, portChannelProtInPackets Counter32, portChannelProtOutPackets Counter32, portChannelIfIndex INTEGER } portChannelModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "An index value that uniquely identifies the module where this port is located." ::= { portChannelEntry 1 } portChannelPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { portChannelEntry 2 } portChannelPorts OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The set of ports on a module channelling together. Each Octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit rep resents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of `1' then that port is included in the set of channel ports. The default value of this object is a string which only has a value of `1' on its own port." ::= { portChannelEntry 3 } portChannelAdminStatus OBJECT-TYPE SYNTAX INTEGER { on(1), off(2), desirable(3), auto(4), desirableSilent(5), autoSilent(6) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates the administrative status set on the channel ports. If the status is set to on(1), the channelling is enabled. If the status is set to off(2), the channelling is disabled. If the status is set to desirable(3), the port initiates a pagp negotiation request to become a channel and will become a channel if the far end agrees. If the status is set to auto(4), the port does not initiate a request to become a channel but will do so if it receives a request to become a channel from the far end. If the status is set to desirableSilent(5), the port initiates a pagp negotiation request to become a channel and will become a channel if the far end agrees. If the port doesn't receive any packets from far end, then after some timeout period the port forms a channel by itself. If the status is set to autoSilent(6), the port does not initiate a request to become a channel, but will do so if it receives a request to become a channel from the far end. If the port doesn't receive any request, then after some timeout period the port forms a channel by itself." DEFVAL { auto } ::= { portChannelEntry 4 } portChannelOperStatus OBJECT-TYPE SYNTAX INTEGER { channelling(1), notChannelling(2) } MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates whether the ports current channelling operational status is channel or not." ::= { portChannelEntry 5 } portChannelNeighbourDeviceId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the neighbors device id." ::= { portChannelEntry 6 } portChannelNeighbourPortId OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the neighbor ports' Id." ::= { portChannelEntry 7 } portChannelProtInPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the number of protocol packets received on the ports." ::= { portChannelEntry 8 } portChannelProtOutPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Indicates the number of protocol packets transmitted on the ports." ::= { portChannelEntry 9 } portChannelIfIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The value of the instance of the ifIndex object defined in MIB-II, for the interface corresponding to the channel which the port belongs to. This object will have a non zero value if its portChannelOperStatus is channelling and the link of this port is up." ::= { portChannelEntry 10 } -- the port capability -- Implementation of the port capability group is optional, but within -- the group all the elements are current. portCpbTable OBJECT-TYPE SYNTAX SEQUENCE OF PortCpbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port capability entries. The number of entries is determined by the number of modules in the chassis and the number of ports on each module." ::= { portCpbGrp 1 } portCpbEntry OBJECT-TYPE SYNTAX PortCpbEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing port capability information for a particular port on a module." INDEX { portCpbModuleIndex, portCpbPortIndex } ::= { portCpbTable 1 } PortCpbEntry ::= SEQUENCE { portCpbModuleIndex INTEGER, portCpbPortIndex INTEGER, portCpbSpeed BITS, portCpbDuplex BITS, portCpbTrunkEncapsulationType BITS, portCpbTrunkMode BITS, portCpbChannel DisplayString, portCpbBroadcastSuppression BITS, portCpbFlowControl BITS, portCpbSecurity INTEGER, portCpbVlanMembership BITS, portCpbPortfast INTEGER, portCpbUdld INTEGER, portCpbInlinePower BITS, portCpbAuxiliaryVlan BITS, portCpbSpan BITS, portCpbCosRewrite INTEGER, portCpbTosRewrite BITS, portCpbCopsGrouping OCTET STRING, portCpbDot1x INTEGER, portCpbIgmpFilter INTEGER } portCpbModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located (see portModuleIndex)." ::= { portCpbEntry 1 } portCpbPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module (see portIndex)." ::= { portCpbEntry 2 } portCpbSpeed OBJECT-TYPE SYNTAX BITS { auto(0), mbps4(1), mbps10(2), mbps16(3), mbps45(4), mbps100(5), mbps155(6), mbps400(7), mbps622(8), mbps1000(9), mbps1dot544(10), -- 1.544 mbps mbps2(11), -- 2 mbps mbps2dot048(12), -- 2.048 mbps kps64(13), -- 64 kps mbps10000(14) } -- 10 Gbps MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port speed capability of a port." ::= { portCpbEntry 3 } portCpbDuplex OBJECT-TYPE SYNTAX BITS { half(0), full(1), auto(2), hdx(3), fdx(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the duplex capability of a port. The fdx(4) is specially for tokenring full-duplex and hdx(3) is specially for tokenring half-duplex." ::= { portCpbEntry 4 } portCpbTrunkEncapsulationType OBJECT-TYPE SYNTAX BITS { lane(0), dot10(1), dot1Q(2), isl(3), negotiate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the VLAN encapsulation capability of a port, The dot10(1) is for 801.10 and dot1q(2) is for 801.1Q." ::= { portCpbEntry 5 } portCpbTrunkMode OBJECT-TYPE SYNTAX BITS { on(0), off(1), desirable(2), auto(3), onNoNegotiate(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the trunk capability of a port." ::= { portCpbEntry 6 } portCpbChannel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the channelling capability of a port." ::= { portCpbEntry 7 } portCpbBroadcastSuppression OBJECT-TYPE SYNTAX BITS { pps(0), percentage(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the broadcast suppression capability of a port. The pps(0) is for ports capable of specifying suppression in packets per second and percentage(1) is for ports capable of specifying suppression in terms of percentage of bandwidth." ::= { portCpbEntry 8 } portCpbFlowControl OBJECT-TYPE SYNTAX BITS { receiveOff(0), receiveOn(1), receiveDesired(2), sendOff(3), sendOn(4), sendDesired(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the flow control capability of a port." ::= { portCpbEntry 9 } portCpbSecurity OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a port supports security." ::= { portCpbEntry 10 } portCpbVlanMembership OBJECT-TYPE SYNTAX BITS { static(0), dynamic(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the vlan membership capability of a port." ::= { portCpbEntry 11 } portCpbPortfast OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a port supports portfast." ::= { portCpbEntry 12 } portCpbUdld OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the port is capable of UDLD (UniDirectional Link Detection) or not." ::= { portCpbEntry 13 } portCpbInlinePower OBJECT-TYPE SYNTAX BITS { auto(0), on(1), off(2), static(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the inline power capability of a port. 'auto' denotes the ability that the switch automatically determines whether or not power should be provided. 'on' denotes the ability to manually turn on inline power. 'off' denotes the ability to manually turn off inline power. 'static' denotes the ability to preallocate power for a port." ::= { portCpbEntry 14 } portCpbAuxiliaryVlan OBJECT-TYPE SYNTAX BITS { vlanNo (0), untagged (1), dot1p (2), none (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the voice vlan capability of a port." ::= { portCpbEntry 15 } portCpbSpan OBJECT-TYPE SYNTAX BITS { source(0), destination(1), reflector(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates port span capabilities. source(0) denotes the capability of being SPAN source destination(1) denotes the capability of being SPAN destination, reflector(2) denotes the capability of being SPAN reflector." ::= { portCpbEntry 16 } portCpbCosRewrite OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a port supports CoS rewrite." ::= { portCpbEntry 17 } portCpbTosRewrite OBJECT-TYPE SYNTAX BITS { dscp(0), ipPrecedence(1) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the ToS rewrite capability of a port. dscp(0) denotes the port capability to classify packets according to the DSCP. ipPrecedence(1) denotes the port capability to classify packets according to the IP Precedence." ::= { portCpbEntry 18 } portCpbCopsGrouping OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..8)) MAX-ACCESS read-only STATUS current DESCRIPTION "The set of ports on a module that are configured together as far as the Differentiated Services Cops feature is concerned. Each Octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port is represented by a single bit within the value of this object. If that bit has a value of `1' then that port is included in the set of Cops grouping." ::= { portCpbEntry 19 } portCpbDot1x OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a port supports 802.1x." ::= { portCpbEntry 20 } portCpbIgmpFilter OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether a port supports IGMP filter." ::= { portCpbEntry 21 } -- The PORT Top "N" Group -- -- The Port Top N group is used to prepare reports that -- describe the ports that top a list ordered by one of -- their statistics. Therefore, the sampling base is on -- the ports in this monitored device system. The data -- source is from all the ports in this monitored device -- system so it is not necessary to specify the data -- source in the control table. -- The available statistics are samples of one of their -- base statistics, over an interval specified by the -- management station. Thus, these statistics are rate -- based. The management station also selects how many such -- ports are reported. -- The portTopNControlTable is used to initiate the -- generation of such a report. The management station -- may select the parameters of such a report, such as -- which statistic, how many ports, port types, and the start -- and stop times of the sampling. -- When the report is prepared, entries are created in the -- portTopNTable associated with the relevant -- portTopNControlEntry. These entries are static for -- each report after it has been prepared. portTopNControlTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTopNControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of top N port control entries." ::= { portTopNGrp 1 } portTopNControlEntry OBJECT-TYPE SYNTAX PortTopNControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of parameters that control the creation of a report of the top N ports according to several metrics. For example, an instance of the portTopNDuration object might be named portTopNDuration.3" INDEX { portTopNControlIndex } ::= { portTopNControlTable 1 } PortTopNControlEntry ::= SEQUENCE { portTopNControlIndex INTEGER, portTopNRateBase INTEGER, portTopNType INTEGER, portTopNMode INTEGER, portTopNReportStatus INTEGER, portTopNDuration INTEGER, portTopNTimeRemaining INTEGER, portTopNStartTime TimeTicks, portTopNRequestedSize INTEGER, portTopNGrantedSize INTEGER, portTopNOwner OwnerString, portTopNStatus RowStatus } portTopNControlIndex OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the portTopNControl table. Each such entry defines one top N report." ::= { portTopNControlEntry 1 } portTopNRateBase OBJECT-TYPE SYNTAX INTEGER { portTopNUtilization(1), portTopNIOOctets(2), portTopNIOPkts(3), portTopNIOBroadcastPkts(4), portTopNIOMulticastPkts(5), portTopNInErrors(6), portTopNBufferOverflow(7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The variable for all ports in this system based on which portTopNTable/report is ordered. This object may not be modified if the associated portTopNStatus object is equal to active(1)." DEFVAL { portTopNUtilization } ::= { portTopNControlEntry 2 } portTopNType OBJECT-TYPE SYNTAX INTEGER { portTopNAllPorts(1), portTopNEthernet(2), portTopNFastEthernet(3), portTopNGigaEthernet(4), portTopNTokenRing(5), portTopNFDDI(6), portTopNAllEthernetPorts(7), portTopN10GigaEthernet(8) } MAX-ACCESS read-create STATUS current DESCRIPTION "The sampling port type. This object may not be modified if the associated portTopNStatus object is equal to active(1)." DEFVAL { portTopNAllPorts } ::= { portTopNControlEntry 3 } portTopNMode OBJECT-TYPE SYNTAX INTEGER { portTopNForeground(1), portTopNBackground(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The running mode of this portTopN control entry. portTopNForeground (1) means when portTopNTimeRemaining reaches to 0, the report will show on the CLI at once and it won't be kept in the portTopNTable. portTopNBackground (2) means the report will not show on the CLI it will be kept in the portTopNTable. This object may not be modified if the associated portTopNStatus object is equal to active(1)." DEFVAL { portTopNBackground } ::= { portTopNControlEntry 4 } portTopNReportStatus OBJECT-TYPE SYNTAX INTEGER { progressing(1), ready(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The report status of this portTopN control entry. Progressing (1) means that the report of this portTopN control entry is still in progress. The management station can poll this mib object to check the report data is available or not. Ready (2) means the report is available." ::= { portTopNControlEntry 5 } portTopNDuration OBJECT-TYPE SYNTAX INTEGER (0|10..999) MAX-ACCESS read-create STATUS current DESCRIPTION "The sampling interval in seconds during which statistics are collected for this report. When this is set a value and the corresponding portTopNControlEntry is valid, the portTopNTimeRemaining object shall be set to the same value. portTopNTimeRemaining starts at the same value as portTopNDuration and counts down as the collection goes on. If this object is set to be zero, it will do the collection immediately. And the collecting report value should be the absolute counter value." DEFVAL { 30 } ::= { portTopNControlEntry 6 } portTopNTimeRemaining OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds left in the report currently being collected. When portTopNDuration object is modified by the management station, a new collection is started, possibly aborting a currently running report. The new value is used as the requested duration of this report, which is loaded from the associated portTopNDuration object. When this object is a non-zero value, any associated portTopNEntries shall be made inaccessible by the monitor. While the value of this object is non-zero and the corresponding portTopNControlENtry is valid, it decrements by one per second until it reaches zero. During this time, all associated portTopNEntries shall remain inaccessible. At the time that this object decrements to zero, the report is made accessible in the portTopNTable. Thus, the portTopN table is to be created only at the end of the collection interval." ::= { portTopNControlEntry 7 } portTopNStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this top N report was last started. In other words, this is the time that the associated portTopNTimeRemaining object was modified to start the requested report." ::= { portTopNControlEntry 8 } portTopNRequestedSize OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of ports requested for the top N entry. When this object is created or modified, the value of portTopNGrantedSize is set as closely to this object as is possible for the particular implementation and available resources. Valid value for this object is 1 to maximum number of physical ports. The default value is 20 ports." DEFVAL { 20 } ::= { portTopNControlEntry 9 } portTopNGrantedSize OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of ports in the top N table. When the associated portTopNRequestedSize object is created or modified, the value of this object should be set as closely to the requested value as is possible for the particular implementation and available resources. The value must not be lowered except as a result of a set to the associated portTopNRequestedSize object. Ports with the highest value of portTopNRateBase shall be placed in this table in decreasing order of this rate until there is no more room or until there are no more ports." ::= { portTopNControlEntry 10 } portTopNOwner OBJECT-TYPE SYNTAX OwnerString MAX-ACCESS read-create STATUS current DESCRIPTION "The entity that configured this entry and is therefore using the resources assigned to it." ::= { portTopNControlEntry 11 } portTopNStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this portTopNControl entry. The Management station sends the user set values with a portTopNStatus value of createAndGo(4). When the agent receives it the collection of the report starts. When the portTopNReportStatus is ready(2) the user can get the reports (portTopNTable). For the current implementation createAndWait(5) will not be supported. There can be only 5 rows in the control table." ::= { portTopNControlEntry 12 } portTopNTable OBJECT-TYPE SYNTAX SEQUENCE OF PortTopNEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of top N port entries." ::= { portTopNGrp 2 } portTopNEntry OBJECT-TYPE SYNTAX PortTopNEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of statistics for a port that is part of a top N report. For example, an instance of the portTopNRateBase object might be named portTopNUtilization.3.10" INDEX { portTopNControlIndex, portTopNIndex } ::= { portTopNTable 1 } PortTopNEntry ::= SEQUENCE { portTopNIndex INTEGER, portTopNModuleNumber INTEGER, portTopNPortNumber INTEGER, portTopNUtilization INTEGER, portTopNIOOctets Counter64, portTopNIOPkts Counter64, portTopNIOBroadcast Counter64, portTopNIOMulticast Counter64, portTopNInErrors Counter32, portTopNBufferOverFlow Counter32 } portTopNIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "An index that uniquely identifies an entry in the portTopN table among those in the same report. This index is between 1 and N, where N is the portTopNGrantedSize of ports with the highest portTopNRateBase. Increasing values of portTopNIndex shall be assigned to entries with decreasing values of portTopNRateBase until index N is assigned to the entry with the lowest value of portTopNRateBase or there are no more portTopNEntries." ::= { portTopNEntry 1 } portTopNModuleNumber OBJECT-TYPE SYNTAX INTEGER (1..20) MAX-ACCESS read-only STATUS current DESCRIPTION "The module number of the port counter data entry." ::= { portTopNEntry 2 } portTopNPortNumber OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port counter data entry." ::= { portTopNEntry 3 } portTopNUtilization OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The utilization of the port in the system. The utilization is computed in the following methods: Ethernet Utilization: (If Full Duplex, multiply by 2) 10 Mbps I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes) Ethernet Util = ----------------------------------------- Interval * 10,000 where 9.6 is interframe gap of Ethernet 6.4 is preamble of Ethernet 10,000 is 10Mbps 100 Mbps I/O-pkts * (96 + 64) + (8 * I/O-Bytes) Ethernet Util = -------------------------------------- Interval * 1,000,000 1000 Mbps I/O-pkts * (96 + 64) + (8 * I/O-Bytes) Ethernet Util = -------------------------------------- Interval * 10,000,000 All other I/O-pkts * (9.6 + 6.4) + (0.8 * I/O-Bytes) Ethernet Util = ------------------------------------------ Interval * N * 1,000 (where N is N Mbps) Token Ring Utilization: (Assuming that Octets is from AC byte through FCS) 4 Mbps Pkts * 32 + (8 * Octets) Token Ring Util = 100 * ------------------------ Interval * 4,000,000 where 32 is bits in SD, ED, FS and IFG 16 Mbps Pkts * 64 + (8 * Octets) Token Ring Util = 100 * ------------------------ Interval * 16,000,000 where 64 is bits in SD, ED, FS and IFG FDDI Utilization: I/O-Pkts * (64 + 8 + 32 + 16) + (8 * I/O-Bytes) FDDI Util = ---------------------------------------------- Interval * 100,000,000 where 64 is Preamble of FDDI, 8 is the Start Delimiter (SD) of FDDI, 32 is the CRC, and 16 is the End of Frame Sequence (EFS) of FDDI." ::= { portTopNEntry 4 } portTopNIOOctets OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Input and Output octets of the port in the system." ::= { portTopNEntry 5 } portTopNIOPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Input and Output packets of the port in the system." ::= { portTopNEntry 6 } portTopNIOBroadcast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Input and Output broadcast packets of the port in the system." ::= { portTopNEntry 7 } portTopNIOMulticast OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The Input and Output multicast packets of the port in the system." ::= { portTopNEntry 8 } portTopNInErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Input error packets of the port in the system." ::= { portTopNEntry 9 } portTopNBufferOverFlow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of buffer overflow of the port in the system." ::= { portTopNEntry 10 } -- the multiple default gateway group -- Implementation of the multiple default gateway group is optional, -- but within the group all the elements are current. If the multiple -- default gateway feature is supported, the entire group should be -- implemented. mdgGatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF MdgGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table lists a maximum of 3 MDG gateways." ::= { mdgGrp 1 } mdgGatewayEntry OBJECT-TYPE SYNTAX MdgGatewayEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A MDG gateway table entry." INDEX { mdgGatewayAddr } ::= { mdgGatewayTable 1 } MdgGatewayEntry ::= SEQUENCE { mdgGatewayAddr IpAddress, mdgGatewayType INTEGER } mdgGatewayAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of a default gateway." ::= { mdgGatewayEntry 1 } mdgGatewayType OBJECT-TYPE SYNTAX INTEGER { invalid(1), -- remove this entry primary(2), -- the primary entry other(3) -- a lower priority entry } MAX-ACCESS read-create STATUS current DESCRIPTION "To add a new entry to the mdgGatewayTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise, one of the other entries will be used. Setting one entry to primary(2) causes any previous primary entry to change to other(3). To remove an entry from the table, set this object to invalid(1). Changing an existing entry from primary(2) to other(3) is not allowed. If the value of this object is updated, the corresponding entry of the ipRouteTable (mibII) will be updated and vice versa." ::= { mdgGatewayEntry 2 } -- the RADIUS group -- Implementation of the RADIUS group is optional, but within the group -- all the elements are current. If the RADIUS feature is implemented, -- the entire group should be implemented. radiusLoginAuthentication OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForConsoleOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the login authentication using RADIUS feature is enabled or disabled for console and/or telnet sessions. Setting this object to enabled(1), the login authentication using RADIUS feature is enabled for both console and telnet sessions. Setting this object to disabled(2), the login authentication using RADIUS feature is disabled for both console and telnet sessions. Setting this object to enabledForTelnetOnly(3),the login authentication using RADIUS feature is enabled only for telnet sessions, but disabled for console session. Setting this object to enabledForConsoleOnly(4), the login authentication using RADIUS feature is enabled only for console sessions, but disabled for telnet sessions. This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." DEFVAL { disabled } ::= { radiusGrp 1 } radiusEnableAuthentication OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2), enabledForTelnetOnly(3), enabledForConsoleOnly(4) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "Indicates whether the enable authentication using the RADIUS feature is enabled or disabled for Console and telnet sessions. Setting this object to enabled(1), the enable authentication using RADIUS feature is enabled for both console and telnet sessions. Setting this object to disabled(2), the enable authentication using RADIUS feature is disabled for both console and telnet sessions. Setting this object to enabledForTelnetOnly(3), the enable authentication using RADIUS feature is enabled only for telnet sessions, but disabled for console sessions. Setting this object to enabledForConsoleOnly(4), the enable authentication using RADIUS feature is enabled only for console sessions, but disabled for telnet sessions. This object is deprecated and replaced by cacPriorityTable in CISCO-AAA-CLIENT-MIB." DEFVAL { disabled } ::= { radiusGrp 2 } radiusDeadtime OBJECT-TYPE SYNTAX INTEGER (0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the length of time in minutes that the system will mark the server dead when a RADIUS server does not respond to an authentication request. During the interval of the dead time, any authentication request that comes up would not be sent to that RADIUS server that was marked as dead. The default value of 0 means that the RADIUS servers will not be marked dead if they do not respond." DEFVAL { 0 } ::= { radiusGrp 3 } radiusAuthKey OBJECT-TYPE SYNTAX DisplayString (SIZE(0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The key used in encrypting the packets passed between the RADIUS server and the client. This key must match the one configured on the server. Note that this item is only accessible when using the community string defined in sysCommunityRwa." -- DEFVAL { NULL } ::= { radiusGrp 4 } radiusTimeout OBJECT-TYPE SYNTAX INTEGER (1..1000) MAX-ACCESS read-write STATUS current DESCRIPTION "This is the time in seconds between retransmissions to the RADIUS server." DEFVAL { 5 } ::= { radiusGrp 5 } radiusRetransmits OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates number of times the RADIUS server should be tried before giving up on the server." DEFVAL { 2 } ::= { radiusGrp 6 } radiusServerTable OBJECT-TYPE SYNTAX SEQUENCE OF RadiusServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table lists a maximum of 3 RADIUS servers. This object is deprecated and replaced by crRadiusServerTable in CISCO-RADIUS-MIB." ::= { radiusGrp 7 } radiusServerEntry OBJECT-TYPE SYNTAX RadiusServerEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A RADIUS server table entry." INDEX { radiusServerAddr } ::= { radiusServerTable 1 } RadiusServerEntry ::= SEQUENCE { radiusServerAddr IpAddress, radiusServerAuthPort INTEGER, radiusServerType INTEGER } radiusServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of a RADIUS Server." ::= { radiusServerEntry 1 } radiusServerAuthPort OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This is the destination UDP port number to which RADIUS messages should be sent. The RADIUS server will not be used for authentication if this port number is 0." REFERENCE "RFC2138, Implementation Note." DEFVAL { 1812 } ::= { radiusServerEntry 2 } radiusServerType OBJECT-TYPE SYNTAX INTEGER { invalid(1), -- remove this entry primary(2), -- the primary entry other(3) -- a lower priority entry } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "To add a new entry to the radiusServerTable, set this object to primary(2) or other(3) for an IP address which is not already in the table. The primary entry will be used first, if it is reachable. Otherwise, one of the other entries will be used. Setting one entry to primary(2) causes any previous primary entry to change to other(3). To remove an entry from the table, set this object to invalid(1)." ::= { radiusServerEntry 3 } -- the traceRoute group -- Implementation of the traceRoute group is optional, but within the -- group all the elements are current. If the trace route feature is -- supported, the entire group should be implemented. traceRouteMaxQueries OBJECT-TYPE SYNTAX INTEGER (1..20) MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of query entries allowed to be outstanding at any time, in the traceRouteQueryTable. The typical value for this object is 5." ::= { traceRouteGrp 1} traceRouteQueryTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRouteQueryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A control table used to query the information about each gateway along the path to a host by specifying retrieval criteria for the host. The resulting data for each instance of a query in this table is returned in the traceRouteDataTable. The maximum number of entries (rows) in this table cannot exceed the value returned by traceRouteMaxQueries." ::= { traceRouteGrp 2 } traceRouteQueryEntry OBJECT-TYPE SYNTAX TraceRouteQueryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the traceRouteQueryTable used to setup retrieval criteria to search for gateways belongs to the path to a particular host identified by its IP address. The actual search is started by setting the value of traceRouteQueryStatus to valid(1)." INDEX { traceRouteQueryIndex } ::= { traceRouteQueryTable 1 } TraceRouteQueryEntry ::= SEQUENCE { traceRouteQueryIndex INTEGER, traceRouteHost DisplayString, traceRouteQueryDNSEnable INTEGER, traceRouteQueryWaitingTime INTEGER, traceRouteQueryInitTTL INTEGER, traceRouteQueryMaxTTL INTEGER, traceRouteQueryUDPPort INTEGER, traceRouteQueryPacketCount INTEGER, traceRouteQueryPacketSize INTEGER, traceRouteQueryTOS INTEGER, traceRouteQueryResult INTEGER, traceRouteQueryTime TimeTicks, traceRouteQueryOwner DisplayString, traceRouteQueryStatus INTEGER } traceRouteQueryIndex OBJECT-TYPE SYNTAX INTEGER (1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Object which specifies an unique entry in the traceRouteQueryTable." ::= { traceRouteQueryEntry 1 } traceRouteHost OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-create STATUS current DESCRIPTION "Network(IP) address in dotted decimal format or the DNS hostname of the host which is tracerouted." ::= { traceRouteQueryEntry 2 } traceRouteQueryDNSEnable OBJECT-TYPE SYNTAX INTEGER{ enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "If this value of this object is true, the traceroute operation will do a DNS lookup for each hop on the path, so the corresponding instance of the traceRouteDataTable will contain the host name and the ip address; otherwise, that instance only contains the ip address." DEFVAL { enabled } ::= { traceRouteQueryEntry 3 } traceRouteQueryWaitingTime OBJECT-TYPE SYNTAX INTEGER (1..300) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The trace route waiting time in seconds for an ICMP response message." DEFVAL { 5 } ::= { traceRouteQueryEntry 4 } traceRouteQueryInitTTL OBJECT-TYPE SYNTAX INTEGER(1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "If this value of this object is set, it allows users skip processing for gateways that are less than traceRouteQueryInitTTL away by sending datagram with the value of this object instead of the default value of one." DEFVAL { 1 } ::= { traceRouteQueryEntry 5 } traceRouteQueryMaxTTL OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum TTL value used in outgoing packets." DEFVAL { 30 } ::= { traceRouteQueryEntry 6} traceRouteQueryUDPPort OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The base UDP destination port is used in the traceroute datagrams. This value of this object is often larger than 30,000 to make it improbable that this port is used (this causes the destination host's UDP module to generate an ICMP port unreachable so the traceroute operation knows when the operation is accomplished). The traceroute operation will increment this value of this object each time it sends a datagram. This object should be used in the unlikely event that the destination port is listening to a port in the default traceroute port range." DEFVAL { 33434 } ::= { traceRouteQueryEntry 7 } traceRouteQueryPacketCount OBJECT-TYPE SYNTAX INTEGER(1..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the number of traceroute packets to send to the target host in this sequence." DEFVAL { 3 } ::= { traceRouteQueryEntry 8 } traceRouteQueryPacketSize OBJECT-TYPE SYNTAX INTEGER(0..1420) MAX-ACCESS read-create STATUS current DESCRIPTION "Specifies the size of traceroute packets to send to the target host in this sequence. " DEFVAL { 0 } ::= { traceRouteQueryEntry 9 } traceRouteQueryTOS OBJECT-TYPE SYNTAX INTEGER(0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of service to be set in the IP header of the outgoing packets.This value can set to see if different types-of-service result in different paths. Not all values of TOS are legal or meaningful (see the IP spec for definitions. Useful values are probably 16 (low delay) and 8 (high throughput)." DEFVAL { 0 } ::= { traceRouteQueryEntry 10 } traceRouteQueryResult OBJECT-TYPE SYNTAX INTEGER(-1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The result status of the query. Possible values are: -1 -Either the query has not been initiated or the agent is busy processing this query instance. Time to completion of the query processing depends on the complexity of the query and the number of matches that satisfy this query. 0..2147483647 - The search has ended and this is the number of rows in the traceRouteDataTable, resulting from this query." ::= { traceRouteQueryEntry 21} traceRouteQueryTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime at the time when the query is configured." ::= { traceRouteQueryEntry 22 } traceRouteQueryOwner OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) MAX-ACCESS read-create STATUS current DESCRIPTION "The manager entity that configured this entry and is therefore using the resources assigned to it." ::= { traceRouteQueryEntry 23 } traceRouteQueryStatus OBJECT-TYPE SYNTAX INTEGER {valid(1), invalid(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The status object used to manage rows in this table. When set this object to valid(1), the query is initiated. Once initiated, all the read-write objects of this table can't be modified. To remove an entry from the table, set this object to invalid(2)." ::= { traceRouteQueryEntry 24 } -- The Trace Route result table. traceRouteDataTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRouteDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information about the gateway belongs to the path to the host corresponding to all the completed queries setup in the traceRouteQueryTable." ::= { traceRouteGrp 3 } traceRouteDataEntry OBJECT-TYPE SYNTAX TraceRouteDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row of the traceRouteDataTable used to return information about all the gateway belongs to the host of which search criteria is corresponding instance of the traceRouteQueryTable." INDEX { traceRouteQueryIndex, traceRouteDataIndex } ::= { traceRouteDataTable 1 } TraceRouteDataEntry ::= SEQUENCE { traceRouteDataIndex INTEGER, traceRouteDataGatewayName DisplayString, traceRouteDataGatewayIp IpAddress, traceRouteDataRtt INTEGER, traceRouteDataHopCount INTEGER, traceRouteDataErrors INTEGER } traceRouteDataIndex OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "Object which specifies an unique entry in the traceRouteDataTable." ::= { traceRouteDataEntry 1 } traceRouteDataGatewayName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "The DNS name of the gateway if available." ::= { traceRouteDataEntry 2 } traceRouteDataGatewayIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The ip address of the gateway. If the traceroute packet was sent and timed-out, the ip address is set to 0.0.0.0." ::= { traceRouteDataEntry 3 } traceRouteDataRtt OBJECT-TYPE SYNTAX INTEGER(1..65535) UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The round trip time of the current packet that have been sent in this sequence." ::= { traceRouteDataEntry 4 } traceRouteDataHopCount OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of hop starting from the place where the traceroute operation is initialized to the gateway which has the traceRouteDataGatewayIp." ::= { traceRouteDataEntry 5 } traceRouteDataErrors OBJECT-TYPE SYNTAX INTEGER { icmpUnreachNet(1), -- bad net icmpUnreachHost(2), -- bad host icmpUnreachProtocol(3), -- bad protocol icmpUnreachPort(4), -- bad port icmpUnreachNeedFrag(5), -- IP defragment caused -- drop icmpUnreachSrcFail(6), -- src route failed icmpUnreachNoNet(7), -- no such network icmpUnreachNoHost(8), -- no such host icmpUnreachHostIsolated(9), -- host isolated icmpUnreachNetProhib(10), -- dod net admin prohibited icmpUnreachProhib(11), -- dod host admin prohibit icmpUnreachNetTos(12), -- net and tos unreachable icmpUnreachHostTos(13), -- host and tos unreachable icmpUnreachAdmin(14), -- administratively prohibited icmpUnreachHostPrec(15), -- host precedence icmpUnreachPrecedence(16), -- precedence cutoff icmpUnknown(17), -- unknown error icmpTimeOut(18), -- time out icmpTTLExpired(19) -- ttl expired } MAX-ACCESS read-only STATUS current DESCRIPTION "The error of the traceroute operation." ::= { traceRouteDataEntry 6 } -- the fileCopy group -- Implementation of the file group is current for all Cisco Workgroup -- Stack products which implement tftp/rcp upload/download functions -- or local file copy. fileCopyProtocol OBJECT-TYPE SYNTAX INTEGER { tftp (1), rcp (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "The protocol to be used for any remote copy. If the config file transfer is to occur locally on the SNMP agent, the method of transfer is left up to the implementation, and is not restricted to the protocols above. The value of this object can not be changed when the fileCopyResult object has the value of inProgress(1)." DEFVAL { tftp } ::= { fileCopyGrp 1 } fileCopyRemoteServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address or the host name of the tftp/rcp remote server from (or to) which to copy the file. If the copy operation is local on the SNMP agent, this object is not applicable. The value of this object can not be changed when the fileCopyResult object has the value of inProgress(1)." ::= { fileCopyGrp 2 } fileCopySrcFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The source file name (including the path, if applicable) of the file. The accepted value of this object is 'cfg1' or 'cfg2' when the requested action is one of the following: copyConfigFromFlashToRuntime(8), and copyConfigFileFromFlashToHost(11). The value of this object can not be changed when the fileCopyResult object has the value of inProgress(1)." ::= { fileCopyGrp 3 } fileCopyDstFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The destination file name (including the path, if applicable) of the file. The accepted value of this object is 'cfg1' or 'cfg2' when the requested action is one of the following: copyConfigFromRuntimeToFlash(9), copyConfigFileFromHostToFlash(10). The value of this object can not be changed when the fileCopyResult object has the value of inProgress(1)." ::= { fileCopyGrp 4 } fileCopyModuleNumber OBJECT-TYPE SYNTAX INTEGER(0..16) MAX-ACCESS read-write STATUS current DESCRIPTION "The module number specified in the copy operation. If the value of this object is 0 and the fileCopyAction object has the value of copyImageFromHostToFlash(4), the switch will do multiple download to the modules with matching image type. It is left to the SNMP agent to allow the individual modules to be reset with the downloaded images or not. The value of this object can not be changed when the fileCopyResult object has the value of inProgress(1)." ::= { fileCopyGrp 5 } fileCopyUserName OBJECT-TYPE SYNTAX DisplayString(SIZE (1..40)) MAX-ACCESS read-write STATUS current DESCRIPTION "Remote user name for copy via rcp protocol. This object must be specified when the fileCopyProtocol is rcp." ::= { fileCopyGrp 6 } fileCopyAction OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following copyConfigFromHostToRuntime(2), copyConfigFromRuntimeToHost(3), copyImageFromHostToFlash(4), copyImageFromFlashToHost(5), copyConfigFromFlashToRuntime(8), copyConfigFromRuntimeToFlash(9), copyConfigFileFromHostToFlash(10), copyConfigFileFromFlashToHost(11), copyTechReportFromRuntimeToHost(12) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to one of the acceptable values will initiate the requested action using the information provided by fileCopyProtocol, fileCopyRemoteServer, fileCopySrcFileName, fileCopyDstFileName,fileCopyModuleNumber and fileCopyUserName. copyConfigFromHostToRuntime(2): Copy the configuration file from host to runtime configuration over the network through tftp/rcp. This action will use fileCopyProtocol, fileCopyRemoteServer, fileCopySrcFileName, fileCopyModuleNumber, and fileCopyUserName (if applicable). copyConfigFromRuntimeToHost(3): Copy the runtime configuration to host over the network through tftp/rcp. This action will use fileCopyProtocol, fileCopyRemoteServer, fileCopyModuleNumber, fileCopyDstFileName, fileCopyUserName (if applicable), and fileCopyRuntimeConfigPart. copyImageFromHostToFlash(4): Copy the image from host to the flash over the network through tftp/rcp. It is up to the SNMP agent to reset and run the downloaded image after copying. This action will use fileCopyProtocol, fileCopyRemoteServer, fileCopySrcFileName, fileCopyModuleNumber, and fileCopyUserName (if applicable). copyImageFromFlashToHost(5): Copy the image from flash to host over the switch through tftp/rcp. This action will use fileCopyProtocol, fileCopyRemoteServer, fileCopyDstFileName, fileCopyModuleNumber, and fileCopyUserName (if applicable). copyConfigFromFlashToRuntime(8): Copy the configuration file to the runtime configuration locally. This action can perform only on the SUPG supervisor model and will use fileCopySrcFileName ('cfg1' or 'cfg2'). copyConfigFromRuntimeToFlash(9): Copy the runtime configuration to a configuration file on the flash locally. This action can perform only on the SUPG supervisor model and will use fileCopyDstFileName ('cfg1' or 'cfg2'), and fileCopyRuntimeConfigPart. copyConfigFileFromHostToFlash(10): Copy the configuration file from host to the runtime configuration over the network through tftp/rcp. This action can perform only on the SUPG supervisor model and will use fileCopyProtocol, fileCopyRemoteServer, fileCopySrcFileName, fileCopyDstFileName, fileCopyModuleNumber and fileCopyUserName (if applicable). copyConfigFileFromFlashToHost(11): Copy the configuration file on the flash to host over the network through tftp/rcp. This action can perform only on the SUPG supervisor model and will use fileCopyProtocol, fileCopyRemoteServer, fileCopySrcFileName, fileCopyDstFileName, fileCopyModuleNumber and fileCopyUserName (if applicable). copyTechReportFromRuntimeToHost(12): Copy the technical report of the system to host over the network through tftp only. This action will use fileCopyProtocol, fileCopyRemoteServer, fileCopyModuleNumber, and fileCopyDstFileName. Setting this object to any other value results in an error. The value of this object can not be changed when the fileCopyResult object has the value of inProgress(1)." ::= { fileCopyGrp 7 } fileCopyResult OBJECT-TYPE SYNTAX INTEGER { inProgress(1), success(2), noResponse(3), tooManyRetries(4), noBuffers(5), noProcesses(6), badChecksum(7), badLength(8), badFlash(9), serverError(10), userCanceled(11), wrongCode(12), fileNotFound(13), invalidHost(14), invalidModule(15), accessViolation(16), unknownStatus(17), invalidStorageDevice(18), insufficientSpaceOnStorageDevice(19), insufficientDramSize(20), incompatibleImage(21), rcpError(22) } MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the result of the last copy action request. If the value of fileCopyResult is rcpError(22), then the detailed rcp error messages are contained in fileCopyResultRcpErrorMessage." ::= { fileCopyGrp 8 } fileCopyResultRcpErrorMessage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "Contains the detailed rcp error messages if the value of fileCopyResult is rcpError(22) for the last copy action request; otherwise, this MIB object contains the empty string." ::= { fileCopyGrp 9 } fileCopyRuntimeConfigPart OBJECT-TYPE SYNTAX INTEGER { all(1), nonDefault(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the part of runtime configuration to be copied. This object will only take effect when the object value of fileCopyAction is one of the following: copyConfigFromRuntimeToHost(3), copyConfigFromRuntimeToFlash(9). all -- copy all the runtime configuration. nonDefault --copy only the part of the runtime configuration which is different from the default configuration." DEFVAL { all } ::= { fileCopyGrp 10 } -- The voice Group -- Voice Port Interface Configuration Table voicePortIfConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF VoicePortIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port entries. The number of entries is determined by the number of modules in the chassis and the number of ports with the voice port interface configuration capability in the system." ::= { voiceGrp 1 } voicePortIfConfigEntry OBJECT-TYPE SYNTAX VoicePortIfConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing voice interface configuration for a particular port." INDEX { voicePortIfConfigModuleIndex, voicePortIfConfigPortIndex } ::= { voicePortIfConfigTable 1 } VoicePortIfConfigEntry ::= SEQUENCE { voicePortIfConfigModuleIndex INTEGER, voicePortIfConfigPortIndex INTEGER, voicePortIfDHCPEnabled TruthValue, voicePortIfIpAddress IpAddress, voicePortIfIpNetMask IpAddress, voicePortIfTftpServerAddress IpAddress, voicePortIfGatewayAddress IpAddress, voicePortIfDnsServerAddress IpAddress, voicePortIfDnsDomain DisplayString, voicePortIfOperDnsDomain DisplayString } voicePortIfConfigModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located." ::= { voicePortIfConfigEntry 1 } voicePortIfConfigPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module." ::= { voicePortIfConfigEntry 2 } voicePortIfDHCPEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicate whether DHCP service is enabled." DEFVAL { true } ::= { voicePortIfConfigEntry 3 } voicePortIfIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's IP address. This object is configurable only if voicePortIfDHCPEnabled is false. When the value of voicePortIfDHCPEnabled is false, this object should be configured." ::= { voicePortIfConfigEntry 4 } voicePortIfIpNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's subnet mask. This object is configurable only if voicePortIfDHCPEnabled is false. When the value of voicePortIfDHCPEnabled is false, this object should be configured." ::= { voicePortIfConfigEntry 5 } voicePortIfTftpServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's TFTP Server address. This object is configurable only if voicePortIfDHCPEnabled is false. When the value of voicePortIfDHCPEnabled is false, this object should be configured." ::= { voicePortIfConfigEntry 6 } voicePortIfGatewayAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's router address. This object is configurable only if voicePortIfDHCPEnabled is false." ::= { voicePortIfConfigEntry 7 } voicePortIfDnsServerAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This port's DNS Server address. This object is configurable only if voicePortIfDHCPEnabled is false." ::= { voicePortIfConfigEntry 8 } voicePortIfDnsDomain OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This port's DNS domain name. This object is configurable only if voicePortIfDHCPEnabled is false." ::= { voicePortIfConfigEntry 9 } voicePortIfOperDnsDomain OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-only STATUS current DESCRIPTION "This port's operational DNS domain name. If voicePortIfDHCPEnabled is true, this object indicates the domain name taken from the DHCP server. If voicePortIfDHCPEnabled is false, this object indicates the domain name configured by users for this voice port or the domain name taken from DNS configuration for the system otherwise." ::= { voicePortIfConfigEntry 10 } -- Voice Port Call Manager Table voicePortCallManagerTable OBJECT-TYPE SYNTAX SEQUENCE OF VoicePortCallManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of call manager entries. The number of entries is determined by the number of modules in the chassis and the number of ports with the voice port interface configuration capability in the system." ::= { voiceGrp 2 } voicePortCallManagerEntry OBJECT-TYPE SYNTAX VoicePortCallManagerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing voice interface configuration for a particular port." INDEX { voicePortModuleIndex, voicePortIndex, voicePortCallManagerIndex } ::= { voicePortCallManagerTable 1 } VoicePortCallManagerEntry ::= SEQUENCE { voicePortModuleIndex INTEGER, voicePortIndex INTEGER, voicePortCallManagerIndex INTEGER, voicePortCallManagerIpAddr IpAddress } voicePortModuleIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located." ::= { voicePortCallManagerEntry 1 } voicePortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module." ::= { voicePortCallManagerEntry 2 } voicePortCallManagerIndex OBJECT-TYPE SYNTAX INTEGER (1..5) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies this CallManager within a module/port. A port can register up to 5 CallManager." ::= { voicePortCallManagerEntry 3 } voicePortCallManagerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Call Manager IP Address of this port. A port can register up to 5 call managers." ::= { voicePortCallManagerEntry 4 } -- Voice Port Operational Dns Server Table voicePortOperDnsServerTable OBJECT-TYPE SYNTAX SEQUENCE OF VoicePortOperDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of operational DNS entries used by the voice ports." ::= { voiceGrp 3 } voicePortOperDnsServerEntry OBJECT-TYPE SYNTAX VoicePortOperDnsServerEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing infomation on DNS servers may be used for a particular voice port. If DHCP is enabled on a port, the DNS server IP address will come from the DHCP server. If DHCP is disabled, the DNS server IP address can be configured by users through the mib object voicePortIfDnsServerAddress for a port, otherwise it will be taken from DNS configuration in the system." INDEX { voicePortDnsModuleIndex, voicePortDnsPortIndex, voicePortOperDnsServerIndex } ::= { voicePortOperDnsServerTable 1 } VoicePortOperDnsServerEntry ::= SEQUENCE { voicePortDnsModuleIndex INTEGER, voicePortDnsPortIndex INTEGER, voicePortOperDnsServerIndex Unsigned32, voicePortOperDnsServerIpAddr IpAddress, voicePortOperDnsServerSource INTEGER } voicePortDnsModuleIndex OBJECT-TYPE SYNTAX INTEGER(1..16) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located." ::= { voicePortOperDnsServerEntry 1 } voicePortDnsPortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module." ::= { voicePortOperDnsServerEntry 2 } voicePortOperDnsServerIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "An index value that uniquely identifies this DNS server within a module/port. This value indicates the priority order among these DNS servers." ::= { voicePortOperDnsServerEntry 3 } voicePortOperDnsServerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The operational DNS Server IP Address of this port. " ::= { voicePortOperDnsServerEntry 4 } voicePortOperDnsServerSource OBJECT-TYPE SYNTAX INTEGER { fromDhcp (1), fromPortConfig (2), fromSystemConfig (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The source of the Dns Server IP Address of this port. fromDhcp(1) indicates that the DNS server IP address comes from the DHCP server. fromPortConfig(2) indicates that the DNS server IP address comes from the object voicePorfIfDnsServerAdress. fromSystemConfig(3) indicates that the DNS server IP address comes from DNS configuration for the system." ::= { voicePortOperDnsServerEntry 5 } -- the port jumbo frame group -- If the port jumbo frame feature is supported, this -- portJumboFrameTable -- should be implemented. portJumboFrameTable OBJECT-TYPE SYNTAX SEQUENCE OF PortJumboFrameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of port jumbo frame entries. The number of entries is determined by the number of ports in the system which support the Jumbo frame feature." ::= { portJumboFrameGrp 1} portJumboFrameEntry OBJECT-TYPE SYNTAX PortJumboFrameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entry containing the jumbo frame configuration for a particular port." INDEX { portJumboFrameModuleIndex, portJumboFramePortIndex } ::= { portJumboFrameTable 1 } PortJumboFrameEntry ::= SEQUENCE { portJumboFrameModuleIndex INTEGER, portJumboFramePortIndex INTEGER, portJumboFrameEnable INTEGER } portJumboFrameModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies the module where this port is located." ::= { portJumboFrameEntry 1 } portJumboFramePortIndex OBJECT-TYPE SYNTAX INTEGER (1..255) MAX-ACCESS read-only STATUS current DESCRIPTION "An index value that uniquely identifies this port within a module. The value is determined by the location of the port on the module. Valid entries are 1 to the value of moduleNumPorts for this module." ::= { portJumboFrameEntry 2 } portJumboFrameEnable OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates the jumbo frame status of the port. If enabled, the port supports frame size greater than the standard ethernet frame size of 1518 bytes." ::= { portJumboFrameEntry 3 } -- the switch acceleration group -- If the module switch acceleration feature is supported, the -- switchAccelerationModuleTable should be implemented. switchAccelerationModuleTable OBJECT-TYPE SYNTAX SEQUENCE OF SwitchAccelerationModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains a list of the modules for which the switch acceleration capability can be configured." ::= { switchAccelerationGrp 1 } switchAccelerationModuleEntry OBJECT-TYPE SYNTAX SwitchAccelerationModuleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A module for which switch acceleration can be configured." INDEX { switchAccelerationModuleIndex } ::= { switchAccelerationModuleTable 1 } SwitchAccelerationModuleEntry ::= SEQUENCE { switchAccelerationModuleIndex INTEGER, switchAccelerationModuleEnable TruthValue } switchAccelerationModuleIndex OBJECT-TYPE SYNTAX INTEGER (1..16) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of moduleIndex for the module where switch acceleration feature can be configured." ::= {switchAccelerationModuleEntry 1 } switchAccelerationModuleEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Indicates whether switch acceleration is enabled on this module or not. When this feature is enabled, the system will increase the switching bandwidth, but the ifAdminStatus of any port on this module can not be set to 'up'. If the ifAdminStatus of any port on this module is 'up', this feature can not be enabled until ifAdminStatus of all ports on the module is set to 'down'." DEFVAL { false } ::= {switchAccelerationModuleEntry 2 } -- The configuration Group configMode OBJECT-TYPE SYNTAX INTEGER { binary(1), -- binary mode text(2) -- text mode } MAX-ACCESS read-write STATUS current DESCRIPTION "Configuration mode to store the configuration information." DEFVAL { binary } ::= { configGrp 1 } configTextFileLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "The location of the text configuration file which can be either NVRAM or a file in the FLASH file system. If the location is NVRAM, this object is a zero length octet string. Otherwise, the FLASH file should be specified in : format. This object is only instantiated when configMode has the value of of text(2). " DEFVAL {''H } ::= { configGrp 2 } configWriteMem OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "When this object is set to true(1), the current configuration is saved in text format in the location specified by configTextFileLocation. This object is only instantiated when configMode has the value of text(2). When read, this object always returns false(2). " ::= { configGrp 3 } configWriteMemStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), succeeded(2), resourceUnavailable(3), badFileName(4), someOtherError(5) } MAX-ACCESS read-write STATUS current DESCRIPTION "The status of the current or the most recently completed 'write memory' operation. The possible values are: inProgress - 'write' operation in progress; succeeded - the 'write' was successful (this value is also used when no write has been invoked since the last time the local system restarted); resourceUnavailable, -the 'write' failed because insufficeient resource was available. badFileName - the 'write' failed because the specified destination file was not found. This might be due to invalid FLASH device name or invalid file name. someOtherError - the 'write' failed for some other reason. This object is only instantiated when configMode has the value of text(2). " ::= { configGrp 4 } -- traps ciscoStackNotificationsPrefix OBJECT IDENTIFIER ::= { workgroup 0 } lerAlarmOn NOTIFICATION-TYPE OBJECTS { fddimibPORTSMTIndex, fddimibPORTIndex } STATUS current DESCRIPTION "A lerAlarmOn trap signifies that the agent entity has detected that the fddimibPORTLerFlag object in the FDDI-SMT73-MIB (RFC 1512) has transitioned to the true(1) state for one of its ports. The generation of this trap can be controlled by the fddimibPORTLerAlarm object in the FDDI-SMT73-MIB for each port." ::= { ciscoStackNotificationsPrefix 1} lerAlarmOff NOTIFICATION-TYPE OBJECTS { fddimibPORTSMTIndex, fddimibPORTIndex } STATUS current DESCRIPTION "A lerAlarmOff trap signifies that the agent entity has detected that the fddimibPORTLerFlag object in the FDDI-SMT73-MIB (RFC 1512) has transitioned to the false(2) state for one of its ports. The generation of this trap can be controlled by the fddimibPORTLerAlarm object in the FDDI-SMT73-MIB for each port." ::= { ciscoStackNotificationsPrefix 2} moduleUp NOTIFICATION-TYPE OBJECTS { moduleIndex, moduleType } STATUS current DESCRIPTION "A moduleUp trap signifies that the agent entity has detected that the moduleStatus object in this MIB has transitioned to the ok(2) state for one of its modules. The generation of this trap can be controlled by the sysEnableModuleTraps object in this MIB." ::= { ciscoStackNotificationsPrefix 3} moduleDown NOTIFICATION-TYPE OBJECTS { moduleIndex, moduleType } STATUS current DESCRIPTION "A moduleDown trap signifies that the agent entity has detected that the moduleStatus object in this MIB has transitioned out of the ok(2) state for one of its modules. The generation of this trap can be controlled by the sysEnableModuleTraps object in this MIB." ::= { ciscoStackNotificationsPrefix 4} chassisAlarmOn NOTIFICATION-TYPE OBJECTS { chassisTempAlarm, chassisMinorAlarm, chassisMajorAlarm } STATUS current DESCRIPTION "A chassisAlarmOn trap signifies that the agent entity has detected the chassisTempAlarm, chassisMinorAlarm, or chassisMajorAlarm object in this MIB has transitioned to the on(2) state. The generation of this trap can be controlled by the sysEnableChassisTraps object in this MIB." ::= { ciscoStackNotificationsPrefix 5} chassisAlarmOff NOTIFICATION-TYPE OBJECTS { chassisTempAlarm, chassisMinorAlarm, chassisMajorAlarm } STATUS current DESCRIPTION "A chassisAlarmOff trap signifies that the agent entity has detected the chassisTempAlarm, chassisMinorAlarm, or chassisMajorAlarm object in this MIB has transitioned to the off(1) state. The generation of this trap can be controlled by the sysEnableChassisTraps object in this MIB." ::= { ciscoStackNotificationsPrefix 6} ipPermitDeniedTrap NOTIFICATION-TYPE OBJECTS { ipPermitDeniedAddress, ipPermitDeniedAccess } STATUS current DESCRIPTION "ipPermitDeniedTrap indicates that IP permit denied access happens. The generation of this trap can be controlled by the sysEnableIpPermitTraps object in this MIB." ::= { ciscoStackNotificationsPrefix 7} sysConfigChangeTrap NOTIFICATION-TYPE OBJECTS { sysConfigChangeTime, sysConfigChangeInfo } STATUS current DESCRIPTION "A sysConfigChange trap signifies that the system configuration in NVRAM is changed. The generation of this trap can be controlled by the sysEnableConfigTraps object in this MIB." ::= { ciscoStackNotificationsPrefix 9 } tokenRingSoftErrExceededTrap NOTIFICATION-TYPE OBJECTS { ringStationMacAddress, ifIndex, ifName } STATUS current DESCRIPTION "This trap is generated when a station local to a token ring port exceeds its Soft Error Threshold within the configured interval." ::= { ciscoStackNotificationsPrefix 10 } -- conformance information ciscoStackMIBConformance OBJECT IDENTIFIER ::= { ciscoStackMIB 31 } ciscoStackMIBCompliances OBJECT IDENTIFIER ::= { ciscoStackMIBConformance 1 } ciscoStackMIBGroups OBJECT IDENTIFIER ::= { ciscoStackMIBConformance 2 } -- compliance statements ciscoStackgMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup, systemTrapGroup, chassisGroup, moduleGroup, portGroup } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemTrapGroup DESCRIPTION "The OptionalSystemTrapGroup is an optional group containing objects providing information about the SNMP traps feature." GROUP optionalChassisGroup DESCRIPTION "The OptionalChassisGroup is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup DESCRIPTION "The OptionalPortGroup is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP authenticationGroup DESCRIPTION "The authenticationGroup is an optional group containing objects providing information about the authentication features." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP monitorGroup DESCRIPTION "The monitorGroup is an optional group containing objects providing information about the port monitoring feature, also known as the Switched Port ANalyzer (SPAN) feature." GROUP vlanGroup DESCRIPTION "The vlanGroup is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup DESCRIPTION "The ipPermitGroup is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." ::= { ciscoStackMIBCompliances 1 } ciscoStackgMIBCompliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup, systemTrapGroup, chassisGroup, moduleGroup, portGroup } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemTrapGroup DESCRIPTION "The OptionalSystemTrapGroup is an optional group containing objects providing information about the SNMP traps feature." GROUP optionalChassisGroup DESCRIPTION "The OptionalChassisGroup is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup DESCRIPTION "The OptionalPortGroup is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP authenticationGroup DESCRIPTION "The authenticationGroup is an optional group containing objects providing information about the authentication features." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP monitorGroup DESCRIPTION "The monitorGroup is an optional group containing objects providing information about the port monitoring feature, also known as the Switched Port ANalyzer (SPAN) feature." GROUP vlanGroup DESCRIPTION "The vlanGroup is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup DESCRIPTION "The ipPermitGroup is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup2 DESCRIPTION "The optionalSystemMiscGroup2 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." ::= { ciscoStackMIBCompliances 2 } ciscoStackgMIBCompliance3 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup, systemTrapGroup, chassisGroup, moduleGroup, portGroup } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemTrapGroup DESCRIPTION "The OptionalSystemTrapGroup is an optional group containing objects providing information about the SNMP traps feature." GROUP optionalChassisGroup DESCRIPTION "The OptionalChassisGroup is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup DESCRIPTION "The OptionalPortGroup is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP authenticationGroup DESCRIPTION "The authenticationGroup is an optional group containing objects providing information about the authentication features." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP monitorGroup DESCRIPTION "The monitorGroup is an optional group containing objects providing information about the port monitoring feature, also known as the Switched Port ANalyzer (SPAN) feature." GROUP vlanGroup DESCRIPTION "The vlanGroup is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup DESCRIPTION "The ipPermitGroup is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup2 DESCRIPTION "The optionalSystemMiscGroup2 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP voiceGroup DESCRIPTION "The voiceGroup is an optional group containing objects providing information about the voice port on the device." GROUP moduleGroup2 DESCRIPTION "The moduleGroup2 is an mandatory group containing objects providing information about the modules on the device." GROUP portCpbGroup3 DESCRIPTION "The portCpbGroup3 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP vlanGroup1 DESCRIPTION "The vlanGroup1 is an optional group containing objects providing information about the Virtual LAN features." GROUP portGroup2 DESCRIPTION "The portGroup2 is an optional group containing objects providing information about the ports on the device." GROUP switchAccelerationModuleGroup DESCRIPTION "This group is mandatory for implementations of switch acceleration capability." GROUP optionalSystemMiscGroup3 DESCRIPTION "The optionalSystemMiscGroup3 is an optional group containing objects providing information about the miscellaneous system features." ::= { ciscoStackMIBCompliances 3 } ciscoStackgMIBCompliance4 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup, systemTrapGroup, chassisGroup, moduleGroup, portGroup } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemTrapGroup DESCRIPTION "The OptionalSystemTrapGroup is an optional group containing objects providing information about the SNMP traps feature." GROUP optionalChassisGroup DESCRIPTION "The OptionalChassisGroup is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup DESCRIPTION "The OptionalPortGroup is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP authenticationGroup DESCRIPTION "The authenticationGroup is an optional group containing objects providing information about the authentication features." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP monitorGroup DESCRIPTION "The monitorGroup is an optional group containing objects providing information about the port monitoring feature, also known as the Switched Port ANalyzer (SPAN) feature." GROUP vlanGroup DESCRIPTION "The vlanGroup is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup DESCRIPTION "The ipPermitGroup is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup2 DESCRIPTION "The optionalSystemMiscGroup2 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP voiceGroup DESCRIPTION "The voiceGroup is an optional group containing objects providing information about the voice port on the device." GROUP moduleGroup2 DESCRIPTION "The moduleGroup2 is an mandatory group containing objects providing information about the modules on the device." GROUP portCpbGroup3 DESCRIPTION "The portCpbGroup3 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP vlanGroup1 DESCRIPTION "The vlanGroup1 is an optional group containing objects providing information about the Virtual LAN features." GROUP portGroup2 DESCRIPTION "The portGroup2 is an optional group containing objects providing information about the ports on the device." GROUP switchAccelerationModuleGroup DESCRIPTION "This group is mandatory for implementations of switch acceleration capability." GROUP optionalSystemMiscGroup3 DESCRIPTION "The optionalSystemMiscGroup3 is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemMiscGroup4 DESCRIPTION "This group is an optional group containing objects providing information about the miscellaneous system features." GROUP vlanTrunkMappingGroup DESCRIPTION "This group is mandatory for implementations of trunk VLAN to VLAN association feature on the device." GROUP portJumboFrameGroup DESCRIPTION "This group is mandatory for implementations of port jumbo frame feature on the device." GROUP portCpbGroup4 DESCRIPTION "The portCpbGroup4 is an optional group containing objects providing additional information about the port capabilities on the device." ::= { ciscoStackMIBCompliances 4 } ciscoStackgMIBCompliance5 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup, systemTrapGroup, chassisGroup, moduleGroup, portGroup } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemTrapGroup DESCRIPTION "The OptionalSystemTrapGroup is an optional group containing objects providing information about the SNMP traps feature." GROUP optionalChassisGroup DESCRIPTION "The OptionalChassisGroup is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup DESCRIPTION "The OptionalPortGroup is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP vlanGroup DESCRIPTION "The vlanGroup is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup DESCRIPTION "The ipPermitGroup is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup2 DESCRIPTION "The optionalSystemMiscGroup2 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP voiceGroup DESCRIPTION "The voiceGroup is an optional group containing objects providing information about the voice port on the device." GROUP moduleGroup2 DESCRIPTION "The moduleGroup2 is an mandatory group containing objects providing information about the modules on the device." GROUP portCpbGroup3 DESCRIPTION "The portCpbGroup3 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portGroup2 DESCRIPTION "The portGroup2 is an optional group containing objects providing information about the ports on the device." GROUP switchAccelerationModuleGroup DESCRIPTION "This group is mandatory for implementations of switch acceleration capability." GROUP optionalSystemMiscGroup3 DESCRIPTION "The optionalSystemMiscGroup3 is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemMiscGroup4 DESCRIPTION "This group is an optional group containing objects providing information about the miscellaneous system features." GROUP vlanTrunkMappingGroup DESCRIPTION "This group is mandatory for implementations of trunk VLAN to VLAN association feature on the device." GROUP portJumboFrameGroup DESCRIPTION "This group is mandatory for implementations of port jumbo frame feature on the device." GROUP portCpbGroup4 DESCRIPTION "The portCpbGroup4 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP fileCopyGroup2 DESCRIPTION "The fileCopyGroup2 is an optional group containing objects providing additional information about tftp/rcp or local file upload/download features." GROUP systemRmonGroup2 DESCRIPTION "The systemRmonGroup2 is an optional group containing objects providing information about RMON max memory usage control." GROUP filterGroup2 DESCRIPTION "The filterGroup2 is an optional group containing objects providing information about the unicast/multicast port filtering feature." GROUP optionalSystemMiscGroup5 DESCRIPTION "The optionalSystemMiscGroup5 is an optional group containing objects providing information about miscellaneous system features." GROUP syslogGroup2 DESCRIPTION "The syslogGroup2 is an optional group containing objects providing information about whether the syslog messages should be sent to telnet sessions." GROUP systemStatusGroup DESCRIPTION "The systemStatusGroup is an optional group containing objects providing information about system LED status." GROUP configurationGroup DESCRIPTION "The configurationGroup is an optional group containing objects providing information about the configuration mode to store the configuration information." GROUP filterGroup3 DESCRIPTION "The filterGroup3 is an optional group containing objects providing information about Broadcast Suppression Violation for port filtering feature." GROUP portGroup3 DESCRIPTION "The portGroup3 is an optional group containing objects providing information about additional information about the ports on the device." GROUP portCpbGroup5 DESCRIPTION "The portCpbGroup5 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP authenticationGroup1 DESCRIPTION "The authenticationGroup1 is an optional group containing objects providing information about the authentication features." ::= { ciscoStackMIBCompliances 5 } ciscoStackgMIBCompliance6 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup1, systemTrapGroup1, chassisGroup, moduleGroup, portGroup4 } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemTrapGroup DESCRIPTION "The OptionalSystemTrapGroup is an optional group containing objects providing information about the SNMP traps feature." GROUP optionalChassisGroup1 DESCRIPTION "The OptionalChassisGroup1 is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup1 DESCRIPTION "The OptionalPortGroup1 is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP vlanGroup2 DESCRIPTION "The vlanGroup2 is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup2 DESCRIPTION "The ipPermitGroup2 is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup6 DESCRIPTION "The optionalSystemMiscGroup6 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup1 is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP voiceGroup DESCRIPTION "The voiceGroup is an optional group containing objects providing information about the voice port on the device." GROUP moduleGroup2 DESCRIPTION "The moduleGroup2 is an mandatory group containing objects providing information about the modules on the device." GROUP portCpbGroup3 DESCRIPTION "The portCpbGroup3 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portGroup2 DESCRIPTION "The portGroup2 is an optional group containing objects providing information about the ports on the device." GROUP switchAccelerationModuleGroup DESCRIPTION "This group is mandatory for implementations of switch acceleration capability." GROUP optionalSystemMiscGroup3 DESCRIPTION "The optionalSystemMiscGroup3 is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemMiscGroup4 DESCRIPTION "This group is an optional group containing objects providing information about the miscellaneous system features." GROUP vlanTrunkMappingGroup DESCRIPTION "This group is mandatory for implementations of trunk VLAN to VLAN association feature on the device." GROUP portJumboFrameGroup DESCRIPTION "This group is mandatory for implementations of port jumbo frame feature on the device." GROUP portCpbGroup4 DESCRIPTION "The portCpbGroup4 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP fileCopyGroup2 DESCRIPTION "The fileCopyGroup2 is an optional group containing objects providing additional information about tftp/rcp or local file upload/download features." GROUP systemRmonGroup2 DESCRIPTION "The systemRmonGroup2 is an optional group containing objects providing information about RMON max memory usage control." GROUP filterGroup2 DESCRIPTION "The filterGroup2 is an optional group containing objects providing information about the unicast/multicast port filtering feature." GROUP optionalSystemMiscGroup5 DESCRIPTION "The optionalSystemMiscGroup5 is an optional group containing objects providing information about miscellaneous system features." GROUP syslogGroup2 DESCRIPTION "The syslogGroup2 is an optional group containing objects providing information about whether the syslog messages should be sent to telnet sessions." GROUP systemStatusGroup DESCRIPTION "The systemStatusGroup is an optional group containing objects providing information about system LED status." GROUP configurationGroup DESCRIPTION "The configurationGroup is an optional group containing objects providing information about the configuration mode to store the configuration information." GROUP filterGroup3 DESCRIPTION "The filterGroup3 is an optional group containing objects providing information about Broadcast Suppression Violation for port filtering feature." GROUP portGroup3 DESCRIPTION "The portGroup3 is an optional group containing objects providing information about additional information about the ports on the device." GROUP portCpbGroup5 DESCRIPTION "The portCpbGroup5 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP authenticationGroup1 DESCRIPTION "The authenticationGroup1 is an optional group containing objects providing information about the authentication features." ::= { ciscoStackMIBCompliances 6 } ciscoStackgMIBCompliance7 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup1, systemTrapGroup2, chassisGroup, moduleGroup, portGroup4 } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalChassisGroup1 DESCRIPTION "The OptionalChassisGroup1 is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup1 DESCRIPTION "The OptionalPortGroup1 is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP vlanGroup2 DESCRIPTION "The vlanGroup2 is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup2 DESCRIPTION "The ipPermitGroup2 is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup6 DESCRIPTION "The optionalSystemMiscGroup6 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup1 is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP voiceGroup DESCRIPTION "The voiceGroup is an optional group containing objects providing information about the voice port on the device." GROUP moduleGroup2 DESCRIPTION "The moduleGroup2 is an mandatory group containing objects providing information about the modules on the device." GROUP portCpbGroup3 DESCRIPTION "The portCpbGroup3 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portGroup2 DESCRIPTION "The portGroup2 is an optional group containing objects providing information about the ports on the device." GROUP switchAccelerationModuleGroup DESCRIPTION "This group is mandatory for implementations of switch acceleration capability." GROUP optionalSystemMiscGroup3 DESCRIPTION "The optionalSystemMiscGroup3 is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemMiscGroup4 DESCRIPTION "This group is an optional group containing objects providing information about the miscellaneous system features." GROUP vlanTrunkMappingGroup DESCRIPTION "This group is mandatory for implementations of trunk VLAN to VLAN association feature on the device." GROUP portJumboFrameGroup DESCRIPTION "This group is mandatory for implementations of port jumbo frame feature on the device." GROUP portCpbGroup4 DESCRIPTION "The portCpbGroup4 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP fileCopyGroup2 DESCRIPTION "The fileCopyGroup2 is an optional group containing objects providing additional information about tftp/rcp or local file upload/download features." GROUP systemRmonGroup2 DESCRIPTION "The systemRmonGroup2 is an optional group containing objects providing information about RMON max memory usage control." GROUP filterGroup2 DESCRIPTION "The filterGroup2 is an optional group containing objects providing information about the unicast/multicast port filtering feature." GROUP optionalSystemMiscGroup5 DESCRIPTION "The optionalSystemMiscGroup5 is an optional group containing objects providing information about miscellaneous system features." GROUP syslogGroup2 DESCRIPTION "The syslogGroup2 is an optional group containing objects providing information about whether the syslog messages should be sent to telnet sessions." GROUP systemStatusGroup DESCRIPTION "The systemStatusGroup is an optional group containing objects providing information about system LED status." GROUP configurationGroup DESCRIPTION "The configurationGroup is an optional group containing objects providing information about the configuration mode to store the configuration information." GROUP filterGroup3 DESCRIPTION "The filterGroup3 is an optional group containing objects providing information about Broadcast Suppression Violation for port filtering feature." GROUP portGroup3 DESCRIPTION "The portGroup3 is an optional group containing objects providing information about additional information about the ports on the device." GROUP portCpbGroup5 DESCRIPTION "The portCpbGroup5 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP optionalSystemTrapGroup1 DESCRIPTION "The OptionalSystemTrapGroup1 is an optional group containing objects providing information about the SNMP traps feature." GROUP authenticationGroup2 DESCRIPTION "The authenticationGroup2 is an optional group containing objects providing information about the authentication features." GROUP notificationGroup DESCRIPTION "The notificationGroup is an optional group containing notifications supported on the device." ::= { ciscoStackMIBCompliances 7 } ciscoStackgMIBCompliance8 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco stack MIB." MODULE -- this module MANDATORY-GROUPS { systemMiscGroup1, systemTrapGroup2, chassisGroup, moduleGroup, portGroup4 } GROUP optionalSystemMiscGroup DESCRIPTION "The OptionalSystemMiscGroup is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalChassisGroup1 DESCRIPTION "The OptionalChassisGroup1 is an optional group containing objects providing information about the chassis of the device." GROUP optionalModuleGroup DESCRIPTION "The OptionalMooduleGroup is an optional group containing objects providing information about the modules on the device." GROUP optionalPortGroup1 DESCRIPTION "The OptionalPortGroup1 is an optional group containing objects providing information about the ports on the device." GROUP systemTrafficGroup DESCRIPTION "The systemTrafficGroup is an optional group containing objects providing information about the traffic meter feature." GROUP systemFddiGroup DESCRIPTION "The systemFddiGroup is an optional group containing objects providing information about the FDDI ring feature." GROUP systemRmonGroup DESCRIPTION "The systemRmonGroup is an optional group containing objects providing information about the extended RMON feature." GROUP tftpGroup DESCRIPTION "The tftpGroup is an optional group containing objects providing information about the tftp upload/download features." GROUP brouteEnableGroup DESCRIPTION "The brouteEnableGroup is an optional group containing objects providing information about the combined bridging/routing feature." GROUP filterGroup DESCRIPTION "The filterGroup is an optional group containing objects providing information about the port filtering feature." GROUP vlanGroup2 DESCRIPTION "The vlanGroup2 is an optional group containing objects providing information about the Virtual LAN features." GROUP vmpsGroup DESCRIPTION "The vmps is an optional group containing objects providing information about the Vlan Membership Policy Server feature." GROUP tokenRingGroup DESCRIPTION "The tokenRingGroup is an optional group containing objects providing information about the tokenring features." GROUP mcastGroup DESCRIPTION "The mcastGroup is an optional group containing objects providing information about the multicast features." GROUP dnsGroup DESCRIPTION "The dnsGroup is an optional group containing objects providing information about the DNS feature." GROUP syslogGroup DESCRIPTION "The syslogGroup is an optional group containing objects providing information about the system log feature." GROUP ntpGroup DESCRIPTION "The ntpGroup is an optional group containing objects providing information about the network time protocol feature." GROUP ipPermitGroup2 DESCRIPTION "The ipPermitGroup2 is an optional group containing objects providing information about the ip permit list feature." GROUP mdgGatewayGroup DESCRIPTION "The mdgGatewayGroup is an optional group containing objects providing information about the multiple default gateway feature." GROUP traceRouteGroup DESCRIPTION "The traceRouteGroup is an optional group containing objects providing information about the trace route feature." GROUP ntpAuthenticationGroup DESCRIPTION "The ntpAuthenticationGroup is an optional group containing objects providing information about the network time protocol authentication feature." GROUP tokenRingSoftErrorMonitorGroup DESCRIPTION "The tokenRingSoftErrorMonitorGroup is an optional group containing objects providing information about the token ring port soft error monitoring feature." GROUP portCpbGroup1 DESCRIPTION "The portCpbGroup1 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portSecurityGroup1 DESCRIPTION "The portSecurityGroup1 is an optional group containing objects providing additional information for supporting port security feature with the multiple secured source MAC addresses." GROUP fileCopyGroup DESCRIPTION "The fileCopyGroup is an optional group containing objects providing information about the tftp/rcp or local file upload/download features." GROUP optionalSystemMiscGroup1 DESCRIPTION "The optionalSystemMiscGroup1 is an optional group containing objects providing information about the miscellaneous system features." GROUP ipPermitGroup1 DESCRIPTION "The ipPermitGroup1 is an optional group containing objects providing information about the ip permit list feature." GROUP optionalSystemMiscGroup6 DESCRIPTION "The optionalSystemMiscGroup6 is an optional group containing objects providing information about the miscellaneous system features." GROUP filterGroup1 DESCRIPTION "The filterGroup1 is an optional group containing objects providing information about the port filtering feature." GROUP mcastGroup1 DESCRIPTION "The mcastGroup1 is an optional group containing objects providing information about the multicast features." GROUP portGroup1 DESCRIPTION "The portGroup1 is an optional group containing objects providing information about the ports on the device." GROUP chassisGroup1 DESCRIPTION "The chassisGroup1 is a group containing objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." GROUP moduleGroup1 DESCRIPTION "The moduleGroup1 is an optional group containing objects providing information about the modules on the device." GROUP portCpbGroup2 DESCRIPTION "The portCpbGroup2 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP voiceGroup DESCRIPTION "The voiceGroup is an optional group containing objects providing information about the voice port on the device." GROUP moduleGroup2 DESCRIPTION "The moduleGroup2 is an mandatory group containing objects providing information about the modules on the device." GROUP portCpbGroup3 DESCRIPTION "The portCpbGroup3 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP portGroup2 DESCRIPTION "The portGroup2 is an optional group containing objects providing information about the ports on the device." GROUP switchAccelerationModuleGroup DESCRIPTION "This group is mandatory for implementations of switch acceleration capability." GROUP optionalSystemMiscGroup3 DESCRIPTION "The optionalSystemMiscGroup3 is an optional group containing objects providing information about the miscellaneous system features." GROUP optionalSystemMiscGroup4 DESCRIPTION "This group is an optional group containing objects providing information about the miscellaneous system features." GROUP vlanTrunkMappingGroup DESCRIPTION "This group is mandatory for implementations of trunk VLAN to VLAN association feature on the device." GROUP portJumboFrameGroup DESCRIPTION "This group is mandatory for implementations of port jumbo frame feature on the device." GROUP portCpbGroup4 DESCRIPTION "The portCpbGroup4 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP fileCopyGroup2 DESCRIPTION "The fileCopyGroup2 is an optional group containing objects providing additional information about tftp/rcp or local file upload/download features." GROUP systemRmonGroup2 DESCRIPTION "The systemRmonGroup2 is an optional group containing objects providing information about RMON max memory usage control." GROUP filterGroup2 DESCRIPTION "The filterGroup2 is an optional group containing objects providing information about the unicast/multicast port filtering feature." GROUP optionalSystemMiscGroup5 DESCRIPTION "The optionalSystemMiscGroup5 is an optional group containing objects providing information about miscellaneous system features." GROUP syslogGroup2 DESCRIPTION "The syslogGroup2 is an optional group containing objects providing information about whether the syslog messages should be sent to telnet sessions." GROUP systemStatusGroup DESCRIPTION "The systemStatusGroup is an optional group containing objects providing information about system LED status." GROUP configurationGroup DESCRIPTION "The configurationGroup is an optional group containing objects providing information about the configuration mode to store the configuration information." GROUP filterGroup3 DESCRIPTION "The filterGroup3 is an optional group containing objects providing information about Broadcast Suppression Violation for port filtering feature." GROUP portGroup3 DESCRIPTION "The portGroup3 is an optional group containing objects providing information about additional information about the ports on the device." GROUP portCpbGroup5 DESCRIPTION "The portCpbGroup5 is an optional group containing objects providing additional information about the port capabilities on the device." GROUP optionalSystemTrapGroup1 DESCRIPTION "The OptionalSystemTrapGroup1 is an optional group containing objects providing information about the SNMP traps feature." GROUP authenticationGroup2 DESCRIPTION "The authenticationGroup2 is an optional group containing objects providing information about the authentication features." GROUP notificationGroup DESCRIPTION "The notificationGroup is an optional group containing notifications supported on the device." GROUP ipPermitGroup3 DESCRIPTION "The ipPermitGroup3 is an optional group containing objects providing information about the ip permit connection limit for a specific host." ::= { ciscoStackMIBCompliances 8 } -- units of conformance systemMiscGroup OBJECT-GROUP OBJECTS { sysMgmtType, sysIpAddr, -- deprecated sysNetMask, -- deprecated sysBroadcast, -- deprecated sysAttachType, sysReset, -- deprecated sysBaudRate, sysInsertMode, sysClearMacTime, -- deprecated sysClearPortTime, -- deprecated sysEnableModem, sysEnableRedirects, sysArpAgingTime, sysCommunityRwa, sysCommunityRw, sysCommunityRo, sysIpVlan } STATUS deprecated DESCRIPTION "A collection of objects providing information about the miscellaneous system features." ::= { ciscoStackMIBGroups 1 } systemTrapGroup OBJECT-GROUP OBJECTS { sysTrapReceiverAddr, -- deprecated sysTrapReceiverType, -- deprecated sysTrapReceiverComm, -- deprecated sysEnableChassisTraps, sysEnableModuleTraps, sysEnableBridgeTraps, sysEnableRepeaterTraps } STATUS deprecated DESCRIPTION "A collection of objects providing information about the SNMP traps feature." ::= { ciscoStackMIBGroups 2 } chassisGroup OBJECT-GROUP OBJECTS { chassisSysType, chassisBkplType, chassisPs1Type, chassisPs1Status, chassisPs1TestResult, chassisPs2Type, chassisPs2Status, chassisPs2TestResult, chassisFanStatus, chassisFanTestResult, chassisMinorAlarm, chassisMajorAlarm, chassisTempAlarm, chassisNumSlots } STATUS current DESCRIPTION "A collection of objects providing information about the chassis of the device. Implementation of this group is mandatory." ::= { ciscoStackMIBGroups 3 } moduleGroup OBJECT-GROUP OBJECTS { moduleIndex, moduleType, moduleStatus, moduleTestResult, moduleAction, moduleName, moduleNumPorts, modulePortStatus, moduleSubType, moduleSerialNumberString } STATUS current DESCRIPTION "A collection of objects providing information about the modules on the device. Implementation of this group is mandatory." ::= { ciscoStackMIBGroups 4 } portGroup OBJECT-GROUP OBJECTS { portModuleIndex, portIndex, portCrossIndex, portName, portType, portOperStatus, portCrossGroupIndex, portAdditionalStatus, portAdminSpeed, portDuplex, portIfIndex, portSpantreeFastStart, -- deprecated portAdminRxFlowControl, portOperRxFlowControl, portAdminTxFlowControl, portOperTxFlowControl, portMacControlTransmitFrames, portMacControlReceiveFrames, portMacControlPauseTransmitFrames, portMacControlPauseReceiveFrames, portMacControlUnknownProtocolFrames, portLinkFaultStatus } STATUS deprecated DESCRIPTION "A collection of objects providing information about the ports on the device." ::= { ciscoStackMIBGroups 5 } optionalSystemMiscGroup OBJECT-GROUP OBJECTS { sysConfigChangeTime, sysBannerMotd, sysConfigChangeInfo, sysConfigRegister, sysBootVariable, sysBootedImage } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 6 } optionalSystemTrapGroup OBJECT-GROUP OBJECTS { sysEnableIpPermitTraps, sysEnableVmpsTraps, sysEnableConfigTraps, sysEnableEntityTrap, sysEnableStpxTrap } STATUS deprecated DESCRIPTION "A collection of objects providing information about the SNMP traps feature. Implementation of this group is optional." ::= { ciscoStackMIBGroups 7 } optionalChassisGroup OBJECT-GROUP OBJECTS { chassisPs1TestResult, chassisPs2TestResult, chassisFanTestResult, chassisSlotConfig, chassisModel, chassisComponentIndex, -- deprecated chassisComponentType, -- deprecated chassisComponentSerialNumber, -- deprecated chassisComponentHwVersion, -- deprecated chassisComponentModel, -- deprecated chassisSerialNumberString -- deprecated } STATUS deprecated DESCRIPTION "A collection of objects providing information about the chassis of the device." ::= { ciscoStackMIBGroups 8 } optionalModuleGroup OBJECT-GROUP OBJECTS { moduleTestResult, moduleModel, moduleHwVersion, moduleFwVersion, moduleSwVersion, moduleStandbyStatus, moduleIPAddress, moduleIPAddressVlan, moduleSubType2, moduleSlotNum } STATUS current DESCRIPTION "A collection of objects providing information about the modules on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 9 } optionalPortGroup OBJECT-GROUP OBJECTS { portSecurityModuleIndex, portSecurityPortIndex, portSecurityAdminStatus, portSecurityOperStatus, portSecurityLastSrcAddr, portSecuritySecureSrcAddr, portChannelModuleIndex, -- deprecated portChannelPortIndex, -- deprecated portChannelPorts, -- deprecated portChannelAdminStatus, -- deprecated portChannelOperStatus, -- deprecated portChannelNeighbourDeviceId, -- deprecated portChannelNeighbourPortId, -- deprecated portChannelProtInPackets, -- deprecated portChannelProtOutPackets, -- deprecated portChannelIfIndex, -- deprecated portCpbModuleIndex, portCpbPortIndex, portCpbSpeed, portCpbDuplex, portCpbTrunkEncapsulationType, portCpbTrunkMode, portCpbChannel, portCpbBroadcastSuppression, portCpbFlowControl, portCpbSecurity, portCpbVlanMembership, portCpbPortfast, portTopNControlIndex, portTopNRateBase, portTopNType, portTopNMode, portTopNReportStatus, portTopNDuration, portTopNTimeRemaining, portTopNStartTime, portTopNRequestedSize, portTopNGrantedSize, portTopNOwner, portTopNStatus, portTopNIndex, portTopNModuleNumber, portTopNPortNumber, portTopNUtilization, portTopNIOOctets, portTopNIOPkts, portTopNIOBroadcast, portTopNIOMulticast, portTopNInErrors, portTopNBufferOverFlow } STATUS deprecated DESCRIPTION "A collection of objects providing information about the ports on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 10 } systemTrafficGroup OBJECT-GROUP OBJECTS { sysTrafficMeterType, sysTraffic, sysTrafficPeak, sysTrafficPeakTime, sysTrafficMeter, sysTrafficMeterPeak, sysTrafficMeterPeakTime } STATUS current DESCRIPTION "A collection of objects providing information about the traffic meter feature. Implementation of this group is optional. If the traffic meter feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 11 } systemFddiGroup OBJECT-GROUP OBJECTS { sysFddiRingSMTIndex, sysFddiRingAddress, sysFddiRingNext } STATUS current DESCRIPTION "A collection of objects providing information about the FDDI ring feature. Implementation of this group is optional. If the FDDI ring feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 12 } systemRmonGroup OBJECT-GROUP OBJECTS { sysEnableRmon, sysExtendedRmonVlanModeEnable, sysExtendedRmonNetflowPassword, sysExtendedRmonNetflowEnable, sysExtendedRmonVlanAgentEnable, sysExtendedRmonEnable } STATUS current DESCRIPTION "A collection of objects providing information about the extended RMON feature. Implementation of this group is optional. If the extended RMON feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 13 } authenticationGroup OBJECT-GROUP OBJECTS { sysConsolePrimaryLoginAuthentication, -- deprecated sysConsolePrimaryEnableAuthentication, -- deprecated sysTelnetPrimaryLoginAuthentication, -- deprecated sysTelnetPrimaryEnableAuthentication, -- deprecated tacacsLoginAuthentication, -- deprecated tacacsEnableAuthentication, -- deprecated tacacsLocalLoginAuthentication, -- deprecated tacacsLocalEnableAuthentication, -- deprecated tacacsNumLoginAttempts, -- deprecated tacacsDirectedRequest, tacacsTimeout, -- deprecated tacacsAuthKey, tacacsServerAddr, tacacsServerType, radiusLoginAuthentication, -- deprecated radiusEnableAuthentication, -- deprecated radiusDeadtime, radiusAuthKey, radiusTimeout, radiusRetransmits, radiusServerAddr, radiusServerAuthPort, radiusServerType } STATUS deprecated DESCRIPTION "A collection of objects providing information about the authentication features. Implementation of this group is optional. If the authentication features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 14 } tftpGroup OBJECT-GROUP OBJECTS { tftpHost, tftpFile, tftpModule, tftpAction, tftpResult } STATUS current DESCRIPTION "A collection of objects providing information about the tftp upload/download features. Implementation of this group is optional. If the tftp upload/download features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 15 } brouteEnableGroup OBJECT-GROUP OBJECTS { brouterPortModule, brouterPort, brouterEnableRip, brouterEnableSpantree, brouterEnableGiantCheck, brouterEnableIpFragmentation, brouterEnableUnreachables, brouterCamMode, brouterIpxSnapToEther, brouterIpx8023RawToFddi, brouterEthernetReceiveMax, brouterEthernetTransmitMax, brouterFddiReceiveMax, brouterFddiTransmitMax, brouterPortIpVlan, brouterPortIpAddr, brouterPortNetMask, brouterPortBroadcast, brouterPortBridgeVlan, brouterPortIpHelpers, brouterIpx8022ToEther, brouterEnableTransitEncapsulation, brouterEnableFddiCheck, brouterEnableAPaRT } STATUS current DESCRIPTION "A collection of objects providing information about the combined bridging/routing feature. Implementation of this group is optional. If the combined bridging/routing feature is supported, the group should be implemented." ::= { ciscoStackMIBGroups 16 } filterGroup OBJECT-GROUP OBJECTS { filterMacModule, filterMacPort, filterMacAddress, filterMacType, filterVendorModule, filterVendorPort, filterVendorId, filterVendorType, filterProtocolModule, filterProtocolPort, filterProtocolValue, filterProtocolType, filterTestModule, filterTestPort, filterTestIndex, filterTestType, filterTestOffset, filterTestValue, filterTestMask, filterPortModule, filterPort, filterPortComplex, filterPortBroadcastThrottle, filterPortBroadcastThreshold, filterPortBroadcastDiscards } STATUS current DESCRIPTION "A collection of objects providing information about the port filtering feature. Implementation of this group is optional. If the port filtering feature is supported, parts or all of this group should be implemented." ::= { ciscoStackMIBGroups 17 } monitorGroup OBJECT-GROUP OBJECTS { monitorSourceModule, monitorSourcePort, monitorDestinationModule, monitorDestinationPort, monitorDirection, monitorEnable, monitorAdminSourcePorts, monitorOperSourcePorts } STATUS deprecated DESCRIPTION "The collection of deprecated objects for managing the Switched Port Analyzer (SPAN) features." ::= { ciscoStackMIBGroups 18 } vlanGroup OBJECT-GROUP OBJECTS { vlanIndex, -- deprecated vlanSpantreeEnable, -- deprecated vlanIfIndex, -- deprecated vlanPortModule, vlanPort, vlanPortVlan, vlanPortIslVlansAllowed, vlanPortSwitchLevel, vlanPortIslAdminStatus, vlanPortIslOperStatus, vlanPortIslPriorityVlans, vlanPortAdminStatus, vlanPortOperStatus } STATUS deprecated DESCRIPTION "A collection of objects providing information about the Virtual LAN features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 19 } vmpsGroup OBJECT-GROUP OBJECTS { vmpsAddr, vmpsType, vmpsAction, vmpsAccessed } STATUS current DESCRIPTION "A collection of objects providing information about the Vlan Membership Policy Server feature. Implementation of this group is optional. If the Vlan Membership Policy Server feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 20 } tokenRingGroup OBJECT-GROUP OBJECTS { tokenRingModuleIndex, tokenRingPortIndex, tokenRingPortSetACbits , tokenRingPortMode , tokenRingPortEarlyTokenRel, tokenRingPortPriorityThresh, tokenRingPortPriorityMinXmit, tokenRingPortCfgLossThresh, tokenRingPortCfgLossInterval, tokenRingDripDistCrfMode, tokenRingDripAreReductionMode, tokenRingDripLocalNodeID, tokenRingDripLastRevision, tokenRingDripLastChangedRevision, tokenRingDripAdvertsReceived, tokenRingDripAdvertsTransmitted, tokenRingDripAdvertsProcessed, tokenRingDripInputQueueDrops, tokenRingDripOutputQueueDrops, tokenRingDripVlan, tokenRingDripLocalPortStatus, tokenRingDripRemotePortStatus, tokenRingDripRemotePortConfigured, tokenRingDripDistributedCrf, tokenRingDripBackupCrf, tokenRingDripOwnerNodeID } STATUS current DESCRIPTION "A collection of objects providing information about the token ring features. Implementation of this group is optional. If the token ring features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 21 } mcastGroup OBJECT-GROUP OBJECTS { mcastRouterModuleIndex, mcastRouterPortIndex, mcastRouterAdminStatus, mcastRouterOperStatus, mcastEnableCgmp, mcastEnableIgmp } STATUS current DESCRIPTION "A collection of objects providing information about the multicast features. Implementation of this group is optional. If the multicast features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 22 } dnsGroup OBJECT-GROUP OBJECTS { dnsEnable, dnsServerAddr, dnsServerType, dnsDomainName } STATUS current DESCRIPTION "A collection of objects providing information about the DNS feature. Implementation of this group is optional. If the DNS feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 23 } syslogGroup OBJECT-GROUP OBJECTS { syslogServerAddr, syslogServerType, syslogConsoleEnable, syslogHostEnable, syslogMessageFacility, syslogMessageSeverity, syslogTimeStampOption } STATUS current DESCRIPTION "A collection of objects providing information about the system log feature. Implementation of this group is optional. If the system log feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 24 } ntpGroup OBJECT-GROUP OBJECTS { ntpBcastClient, ntpBcastDelay, ntpClient, ntpServerAddress, ntpServerType, ntpSummertimeStatus, ntpSummerTimezoneName, ntpTimezoneName, ntpTimezoneOffsetHour, ntpTimezoneOffsetMinute } STATUS current DESCRIPTION "A collection of objects providing information about the network time protocol feature. Implementation of this group is optional. If the network time protocol feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 25 } ipPermitGroup OBJECT-GROUP OBJECTS { ipPermitAddress, ipPermitMask, ipPermitEnable, -- deprecated ipPermitType, ipPermitDeniedAddress, ipPermitDeniedAccess, ipPermitDeniedTime } STATUS deprecated DESCRIPTION "A collection of objects providing information about the ip permit list feature. Implementation of this group is optional. If the ip permit list feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 26 } mdgGatewayGroup OBJECT-GROUP OBJECTS { mdgGatewayAddr, mdgGatewayType } STATUS current DESCRIPTION "A collection of objects providing information about the multiple default gateway feature. Implementation of this group is optional. If the multiple default gateway feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 27 } traceRouteGroup OBJECT-GROUP OBJECTS { traceRouteMaxQueries, traceRouteQueryIndex, traceRouteHost, traceRouteQueryDNSEnable, traceRouteQueryWaitingTime, traceRouteQueryInitTTL, traceRouteQueryMaxTTL, traceRouteQueryUDPPort, traceRouteQueryPacketCount, traceRouteQueryPacketSize, traceRouteQueryTOS, traceRouteQueryResult, traceRouteQueryTime, traceRouteQueryOwner, traceRouteQueryStatus, traceRouteDataIndex, traceRouteDataGatewayName, traceRouteDataGatewayIp, traceRouteDataRtt, traceRouteDataHopCount, traceRouteDataErrors } STATUS current DESCRIPTION "A collection of objects providing information about the trace route feature. Implementation of this group is optional. If the trace route feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 28 } deprecatedObjectGroup OBJECT-GROUP OBJECTS { sysCommunityAccess, sysCommunityString, moduleHwHiVersion, moduleHwLoVersion, moduleFwHiVersion, moduleFwLoVersion, moduleSwHiVersion, moduleSwLoVersion, brouterCamAgingTime, chassisSerialNumber, moduleSerialNumber } STATUS deprecated DESCRIPTION "A collection of objects that have been deprecated." ::= { ciscoStackMIBGroups 29 } ntpAuthenticationGroup OBJECT-GROUP OBJECTS { ntpServerPublicKey, ntpAuthenticationEnable, ntpAuthenticationPublicKey, ntpAuthenticationSecretKey, ntpAuthenticationTrustedMode, ntpAuthenticationType } STATUS current DESCRIPTION "A collection of objects providing information about the network time protocol authentication feature. Implementation of this group is optional. If the network time protocol authentication feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 30 } tokenRingSoftErrorMonitorGroup OBJECT-GROUP OBJECTS { tokenRingPortSoftErrThresh, tokenRingPortSoftErrReportInterval, tokenRingPortSoftErrResetCounters, tokenRingPortSoftErrLastCounterReset, tokenRingPortSoftErrEnable } STATUS current DESCRIPTION "A collection of objects providing information about the token ring port soft error monitoring feature. Implementation of this group is optional. If the token ring features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 31 } portCpbGroup1 OBJECT-GROUP OBJECTS { portCpbUdld } STATUS current DESCRIPTION "A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 32 } portSecurityGroup1 OBJECT-GROUP OBJECTS { portSecurityMaxSrcAddr, portSecurityAgingTime, portSecurityShutdownTimeOut, portSecurityViolationPolicy, portSecurityExtModuleIndex, portSecurityExtPortIndex, portSecurityExtSecureSrcAddr, portSecurityExtControlStatus } STATUS current DESCRIPTION "A collection of objects providing additional information for supporting port security feature with the multiple secured source MAC addresses. Implementation of this group is optional." ::= { ciscoStackMIBGroups 33} fileCopyGroup OBJECT-GROUP OBJECTS { fileCopyProtocol, fileCopyRemoteServer, fileCopySrcFileName, fileCopyDstFileName, fileCopyModuleNumber, fileCopyUserName, fileCopyAction, fileCopyResult, fileCopyResultRcpErrorMessage } STATUS current DESCRIPTION "A collection of objects providing information about the tftp/rcp or local file upload/download features. Implementation of this group is optional. If the tftp upload/download features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 34 } optionalSystemMiscGroup1 OBJECT-GROUP OBJECTS { sysStartupConfigSource, sysStartupConfigSourceFile, sysConfigSupervisorModuleNo, sysStandbyPortEnable } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 35 } ipPermitGroup1 OBJECT-GROUP OBJECTS { ipPermitAccessType } STATUS current DESCRIPTION "A collection of objects providing additional information for allowing the ip permit host with the specified access type. Implementation of this group is optional. If the ip permit list enhancement feature is supported, this group should be implemented." ::= { ciscoStackMIBGroups 36 } optionalSystemMiscGroup2 OBJECT-GROUP OBJECTS { sysPortFastBpduGuard, -- deprecated sysErrDisableTimeoutEnable, sysErrDisableTimeoutInterval, sysTrafficMonitorHighWaterMark, sysHighAvailabilityEnable, sysHighAvailabilityVersioningEnable, sysHighAvailabilityOperStatus, sysHighAvailabilityNotRunningReason } STATUS deprecated DESCRIPTION "A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 37 } filterGroup1 OBJECT-GROUP OBJECTS { filterPortBroadcastThresholdFraction } STATUS current DESCRIPTION "A collection of objects providing information about the port filtering feature. Implementation of this group is optional. If the port filtering feature is supported, parts or all of this group should be implemented." ::= { ciscoStackMIBGroups 38 } mcastGroup1 OBJECT-GROUP OBJECTS { mcastEnableRgmp } STATUS current DESCRIPTION "A collection of objects providing information about the multicast features. Implementation of this group is optional. If the multicast features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 39 } portGroup1 OBJECT-GROUP OBJECTS { portAdditionalOperStatus, portEntPhysicalIndex } STATUS current DESCRIPTION "A collection of objects providing information about the ports on the device. Implementation of this group is optional." ::= { ciscoStackMIBGroups 40 } chassisGroup1 OBJECT-GROUP OBJECTS { chassisPs3Type, chassisPs3Status, chassisPs3TestResult, chassisPEMInstalled } STATUS current DESCRIPTION "A collection of objects providing information about the chassis of the device. This group must be implemented by systems that can have 3 or more power supplies." ::= { ciscoStackMIBGroups 41 } moduleGroup1 OBJECT-GROUP OBJECTS { moduleEntPhysicalIndex } STATUS current DESCRIPTION "A collection of objects providing information about the modules on the device. Implementation of this group is mandatory." ::= { ciscoStackMIBGroups 42 } portCpbGroup2 OBJECT-GROUP OBJECTS { portCpbSpan } STATUS current DESCRIPTION "A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 43 } voiceGroup OBJECT-GROUP OBJECTS { voicePortIfDHCPEnabled, voicePortIfIpAddress, voicePortIfIpNetMask, voicePortIfTftpServerAddress, voicePortIfGatewayAddress, voicePortIfDnsServerAddress, voicePortIfDnsDomain, voicePortIfOperDnsDomain, voicePortCallManagerIpAddr, voicePortOperDnsServerIpAddr, voicePortOperDnsServerSource } STATUS current DESCRIPTION "A collection of objects providing information about the voice ports on the device. Implemetation of this group is Optional" ::= { ciscoStackMIBGroups 44 } portGroup2 OBJECT-GROUP OBJECTS { portInlinePowerDetect } STATUS current DESCRIPTION "A collection of objects providing information about the ports on the device. Implementation of this group is optional." ::= { ciscoStackMIBGroups 45 } vlanGroup1 OBJECT-GROUP OBJECTS { vlanPortAuxiliaryVlan } STATUS deprecated DESCRIPTION "A collection of objects providing information about the Virtual LAN features. Implementation of this group is optional. If the Virtual LAN features are supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 46 } portCpbGroup3 OBJECT-GROUP OBJECTS { portCpbInlinePower, portCpbAuxiliaryVlan } STATUS current DESCRIPTION "A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 47 } moduleGroup2 OBJECT-GROUP OBJECTS { moduleAdditionalStatus } STATUS current DESCRIPTION "A collection of objects providing information about the modules on the device. Implementation of this group is mandatory." ::= { ciscoStackMIBGroups 48 } switchAccelerationModuleGroup OBJECT-GROUP OBJECTS { switchAccelerationModuleIndex, switchAccelerationModuleEnable } STATUS current DESCRIPTION "A collection of objects providing information about the modules switch acceleration configuration. Implementation of this group is mandatory if the module switch acceleration feature is supported." ::= { ciscoStackMIBGroups 49 } optionalSystemMiscGroup3 OBJECT-GROUP OBJECTS { sysExtendedRmonNetflowModuleMask } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features. The sysExtendedRmonNetflowModuleMask object is optional object and it will only be supported in the platform supporting multiple NAM (Network Analysis Module) cards. Implementation of this group is optional." ::= { ciscoStackMIBGroups 50 } optionalSystemMiscGroup4 OBJECT-GROUP OBJECTS { sshPublicKeySize } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features." ::= { ciscoStackMIBGroups 51 } vlanTrunkMappingGroup OBJECT-GROUP OBJECTS { vlanTrunkMappingMax, vlanTrunkMappingToVlan, vlanTrunkMappingType, vlanTrunkMappingOper, vlanTrunkMappingStatus } STATUS current DESCRIPTION "A collection of objects providing information about the trunk VLAN to VLAN associations. Implementation of this group is mandatory if the trunk VLAN to VLAN association feature is supported on the device." ::= { ciscoStackMIBGroups 52 } portJumboFrameGroup OBJECT-GROUP OBJECTS { portJumboFrameModuleIndex, portJumboFramePortIndex, portJumboFrameEnable } STATUS current DESCRIPTION "A collection of objects providing information about the port jumbo frame feature on the device. Implementation of this group is mandatory if the port jumbo frame feature is supported on the device." ::= { ciscoStackMIBGroups 53 } portCpbGroup4 OBJECT-GROUP OBJECTS { portCpbCosRewrite, portCpbTosRewrite, portCpbCopsGrouping } STATUS current DESCRIPTION "A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 54 } fileCopyGroup2 OBJECT-GROUP OBJECTS { fileCopyRuntimeConfigPart } STATUS current DESCRIPTION "A collection of objects providing additional information about tftp/rcp or local file upload/download features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 55 } systemRmonGroup2 OBJECT-GROUP OBJECTS { sysMaxRmonMemory } STATUS current DESCRIPTION "A collection of object providing RMON max memory usage control." ::= { ciscoStackMIBGroups 56 } filterGroup2 OBJECT-GROUP OBJECTS { filterPortSuppressionOption } STATUS current DESCRIPTION "A collection of objects providing information about the unicast/multicast port filtering feature." ::= { ciscoStackMIBGroups 57 } optionalSystemMiscGroup5 OBJECT-GROUP OBJECTS { sysMacReductionAdminEnable, sysMacReductionOperEnable } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features." ::= { ciscoStackMIBGroups 58 } syslogGroup2 OBJECT-GROUP OBJECTS { syslogTelnetEnable } STATUS current DESCRIPTION "A collection of object providing control about whether the syslog messages should be sent to telnet sessions. Implementation of this group is optional." ::= { ciscoStackMIBGroups 59 } systemStatusGroup OBJECT-GROUP OBJECTS { sysStatus } STATUS current DESCRIPTION "A collection of object providing the system LED status. Implementation of this group is optional." ::= { ciscoStackMIBGroups 60 } configurationGroup OBJECT-GROUP OBJECTS { configMode, configTextFileLocation, configWriteMem, configWriteMemStatus } STATUS current DESCRIPTION "A collection of object providing the information about the configuration mode to store the configuration information. Implementation of this group is optional." ::= { ciscoStackMIBGroups 61 } filterGroup3 OBJECT-GROUP OBJECTS { filterPortSuppressionViolation } STATUS current DESCRIPTION "A collection of objects providing additional information about about the Broadcast Suppression Violation for port filtering feature. Implementation of this group is optional." ::= { ciscoStackMIBGroups 62 } portGroup3 OBJECT-GROUP OBJECTS { portErrDisableTimeOutEnable } STATUS current DESCRIPTION "A collection of objects providing additional information about the ports on the device. Implementation of this group is optional." ::= { ciscoStackMIBGroups 63 } portCpbGroup5 OBJECT-GROUP OBJECTS { portCpbDot1x, portCpbIgmpFilter } STATUS current DESCRIPTION "A collection of objects providing additional information about the port capabilities on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 64 } authenticationGroup1 OBJECT-GROUP OBJECTS { tacacsDirectedRequest, tacacsAuthKey, tacacsServerAddr, tacacsServerType, radiusDeadtime, radiusAuthKey, radiusTimeout, radiusRetransmits, radiusServerAddr, radiusServerAuthPort, radiusServerType } STATUS deprecated DESCRIPTION "A collection of objects providing information about the authentication features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 65 } systemMiscGroup1 OBJECT-GROUP OBJECTS { sysMgmtType, sysAttachType, sysBaudRate, sysInsertMode, sysEnableModem, sysEnableRedirects, sysArpAgingTime, sysCommunityRwa, sysCommunityRw, sysCommunityRo, sysIpVlan } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features." ::= { ciscoStackMIBGroups 66 } systemTrapGroup1 OBJECT-GROUP OBJECTS { sysEnableChassisTraps, sysEnableModuleTraps, sysEnableBridgeTraps, sysEnableRepeaterTraps } STATUS deprecated DESCRIPTION "A collection of objects providing information about the SNMP traps feature." ::= { ciscoStackMIBGroups 67 } optionalSystemMiscGroup6 OBJECT-GROUP OBJECTS { sysErrDisableTimeoutEnable, sysErrDisableTimeoutInterval, sysTrafficMonitorHighWaterMark, sysHighAvailabilityEnable, sysHighAvailabilityVersioningEnable, sysHighAvailabilityOperStatus, sysHighAvailabilityNotRunningReason } STATUS current DESCRIPTION "A collection of objects providing information about the miscellaneous system features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 68 } optionalChassisGroup1 OBJECT-GROUP OBJECTS { chassisPs1TestResult, chassisPs2TestResult, chassisFanTestResult, chassisSlotConfig, chassisModel } STATUS current DESCRIPTION "A collection of objects providing information about the chassis of the device." ::= { ciscoStackMIBGroups 69 } portGroup4 OBJECT-GROUP OBJECTS { portModuleIndex, portIndex, portCrossIndex, portName, portType, portOperStatus, portCrossGroupIndex, portAdditionalStatus, portAdminSpeed, portDuplex, portIfIndex, portAdminRxFlowControl, portOperRxFlowControl, portAdminTxFlowControl, portOperTxFlowControl, portMacControlTransmitFrames, portMacControlReceiveFrames, portMacControlPauseTransmitFrames, portMacControlPauseReceiveFrames, portMacControlUnknownProtocolFrames, portLinkFaultStatus } STATUS current DESCRIPTION "A collection of objects providing information about the ports on the device." ::= { ciscoStackMIBGroups 70 } vlanGroup2 OBJECT-GROUP OBJECTS { vlanPortModule, vlanPort, vlanPortVlan, vlanPortIslVlansAllowed, vlanPortSwitchLevel, vlanPortIslAdminStatus, vlanPortIslOperStatus, vlanPortIslPriorityVlans, vlanPortAdminStatus, vlanPortOperStatus } STATUS current DESCRIPTION "A collection of objects providing information about the Virtual LAN features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 71 } ipPermitGroup2 OBJECT-GROUP OBJECTS { ipPermitAddress, ipPermitMask, ipPermitType, ipPermitDeniedAddress, ipPermitDeniedAccess, ipPermitDeniedTime, ipPermitAccessTypeEnable } STATUS current DESCRIPTION "A collection of objects providing information about the ip permit list feature. Implementation of this group is optional. If the ip permit list feature is supported, the entire group should be implemented." ::= { ciscoStackMIBGroups 72 } optionalPortGroup1 OBJECT-GROUP OBJECTS { portSecurityModuleIndex, portSecurityPortIndex, portSecurityAdminStatus, portSecurityOperStatus, portSecurityLastSrcAddr, portSecuritySecureSrcAddr, portCpbModuleIndex, portCpbPortIndex, portCpbSpeed, portCpbDuplex, portCpbTrunkEncapsulationType, portCpbTrunkMode, portCpbChannel, portCpbBroadcastSuppression, portCpbFlowControl, portCpbSecurity, portCpbVlanMembership, portCpbPortfast, portTopNControlIndex, portTopNRateBase, portTopNType, portTopNMode, portTopNReportStatus, portTopNDuration, portTopNTimeRemaining, portTopNStartTime, portTopNRequestedSize, portTopNGrantedSize, portTopNOwner, portTopNStatus, portTopNIndex, portTopNModuleNumber, portTopNPortNumber, portTopNUtilization, portTopNIOOctets, portTopNIOPkts, portTopNIOBroadcast, portTopNIOMulticast, portTopNInErrors, portTopNBufferOverFlow } STATUS current DESCRIPTION "A collection of objects providing information about the ports on the device. Implementation of this group is Optional." ::= { ciscoStackMIBGroups 73 } optionalSystemTrapGroup1 OBJECT-GROUP OBJECTS { sysEnableIpPermitTraps, sysEnableVmpsTraps, sysEnableConfigTraps, sysEnableEntityTrap } STATUS current DESCRIPTION "A collection of objects providing information about the SNMP traps feature. Implementation of this group is optional." ::= { ciscoStackMIBGroups 74 } authenticationGroup2 OBJECT-GROUP OBJECTS { tacacsDirectedRequest, tacacsAuthKey, tacacsServerAddr, tacacsServerType, radiusDeadtime, radiusAuthKey, radiusTimeout, radiusRetransmits } STATUS current DESCRIPTION "A collection of objects providing information about the authentication features. Implementation of this group is optional." ::= { ciscoStackMIBGroups 75 } systemTrapGroup2 OBJECT-GROUP OBJECTS { sysEnableChassisTraps, sysEnableModuleTraps, sysEnableRepeaterTraps } STATUS current DESCRIPTION "A collection of objects providing information about the SNMP traps feature." ::= { ciscoStackMIBGroups 76 } notificationGroup NOTIFICATION-GROUP NOTIFICATIONS { lerAlarmOn, lerAlarmOff, moduleUp, moduleDown, chassisAlarmOn, chassisAlarmOff, ipPermitDeniedTrap, sysConfigChangeTrap, tokenRingSoftErrExceededTrap } STATUS current DESCRIPTION "A collection of notifications supported on the device." ::= { ciscoStackMIBGroups 77 } ipPermitGroup3 OBJECT-GROUP OBJECTS { ipPermitTelnetConnectLimit, ipPermitSshConnectLimit } STATUS current DESCRIPTION "A collection of objects providing configuration information on ip permit connection limit for a specific host." ::= { ciscoStackMIBGroups 78 } END