-- ***************************************************************** -- CISCO-RPMS-MIB.my: Cisco Resource Policy Management System (RPMS) -- Server MIB file. -- -- March 26, 2002 Patrick Hamel (path@cisco.com) -- August 17, 2001 Wei Song (weisong@cisco.com) -- -- Copyright (c) 2001 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- Caution. This MIB is temporary and experimental. In the future it -- will be removed from products, perhaps with short notice, in favor -- of more standard or generic MIBs. Application developers should not -- depend on long-term access to this MIB. -- -- Please report usage of the MIB to Cisco Systems to support future -- decision regarding particular MIB objects CISCO-RPMS-MIB DEFINITIONS ::= BEGIN IMPORTS Counter32, Gauge32, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF RowStatus, TimeStamp FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB ciscoExperiment FROM CISCO-SMI; ciscoRpmsMIB MODULE-IDENTITY LAST-UPDATED "200204170000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-rpms@cisco.com" DESCRIPTION "This MIB contains objects pertinent to a Resource Policy Management System (RPMS) server. RPMS is a key component of Cisco Any Service Any Port (ASAP) solution and provides the ability to dynamically share resources across network access servers (NAS). RPMS enables enforcement of Service Level Agreements(SLA) between wholesale providers and their customers. Such SLA enforcement is done at call pre-authentication stage. An SLA is conceptually a set of clauses (limits) that dictate how voice, dial and/or virtual private data network (VPDN) services will be provided by the wholesaler. " REVISION "200204170000Z" DESCRIPTION "Updated name from Resource Pool Manager Server to Resource Policy Management System (RPMS). This reflects product change, Corrected omission of 'crpmsVpdnGroupCpEntryStatus' from 'crpmsVpdnGroup' object group in initial release, Updated E-Mail contact to correct list for rpms." REVISION "200111010000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoExperiment 84 } ciscoRpmsMIBObjects OBJECT IDENTIFIER ::= { ciscoRpmsMIB 1 } crpmsSystem OBJECT IDENTIFIER ::= { ciscoRpmsMIBObjects 1 } crpmsCustomerProfile OBJECT IDENTIFIER ::= { ciscoRpmsMIBObjects 2 } crpmsVpdn OBJECT IDENTIFIER ::= { ciscoRpmsMIBObjects 3 } crpmsNotif OBJECT IDENTIFIER ::= { ciscoRpmsMIBObjects 4 } -- -- -- RPMS system object group -- -- crpmsSubsystemTable OBJECT-TYPE SYNTAX SEQUENCE OF CrpmsSubsystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains currently working RPMS subsystems. Each row contains the name of the subsystem and its uptime since last initialization." ::= { crpmsSystem 1 } crpmsSubsystemEntry OBJECT-TYPE SYNTAX CrpmsSubsystemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A subsystem entry contains information of a RPMS subsystem. At the system startup, if a subsystem fails to initialize itself, it will not appear in this table. If a subsystem becomes unavailable, its corresponding row will be removed from this table." INDEX { crpmsSubsystemIndex } ::= { crpmsSubsystemTable 1 } CrpmsSubsystemEntry ::= SEQUENCE { crpmsSubsystemIndex Unsigned32, crpmsSubsystemName SnmpAdminString, crpmsSubsystemUptime TimeStamp } crpmsSubsystemIndex OBJECT-TYPE SYNTAX Unsigned32 (1..128) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An unique value, greater than zero, for each subsystem. It is recommended that values are assigned contiguously starting from 1." ::= { crpmsSubsystemEntry 1 } crpmsSubsystemName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the subsystem entry." ::= { crpmsSubsystemEntry 2 } crpmsSubsystemUptime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The time (in hundredths of a second) since the subsystem was last (re)initialized." ::= { crpmsSubsystemEntry 3 } -- -- -- RPMS customer profile object group -- -- crpmsCpTable OBJECT-TYPE SYNTAX SEQUENCE OF CrpmsCpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The customer profile table contains information about all SLAs hosted on an SLA Server." ::= { crpmsCustomerProfile 1 } crpmsCpEntry OBJECT-TYPE SYNTAX CrpmsCpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A customer profile (Cp) entry contains information about a specific customer. A customer profile is a set of limits associated with a customer. These limits control how RPMS will respond to an incoming call under various scenarios." INDEX { IMPLIED crpmsCpName } ::= { crpmsCpTable 1 } CrpmsCpEntry ::= SEQUENCE { crpmsCpName SnmpAdminString, crpmsCpLimit Unsigned32, crpmsCpOverflowLimit Unsigned32, crpmsCpActiveCalls Gauge32, crpmsCpActiveOverflowCalls Gauge32, crpmsCpAttemptedCalls Counter32, crpmsCpAttemptedOverflowCalls Counter32, crpmsCpRejections Counter32, crpmsCpOverflowRejections Counter32, crpmsCpLimitThreshold Unsigned32, crpmsCpOverflowLimitThreshold Unsigned32, crpmsCpCallRejectionThreshold Unsigned32, crpmsCpOverflowRejectThreshold Unsigned32, crpmsCpEntryStatus RowStatus } crpmsCpName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the customer profile. This name uniquely identifies the customer profile in the RPMS system." ::= { crpmsCpEntry 1 } crpmsCpLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of concurrent calls allowed in this customer profile. Once this limit is exceeded, RPMS will reject any new calls unless an overflow limit (crpmsCpOverflowLimit) is configured for this customer." DEFVAL { 0 } ::= { crpmsCpEntry 2 } crpmsCpOverflowLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of calls allowed after the customer profile limit(crpmsCpLimit) has been reached. Such calls are termed overflow calls." DEFVAL { 0 } ::= { crpmsCpEntry 3 } crpmsCpActiveCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current active calls for this customer profile." ::= { crpmsCpEntry 4 } crpmsCpActiveOverflowCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of current active overflow calls for this customer profile." ::= { crpmsCpEntry 5 } crpmsCpAttemptedCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of attempted calls (both successful and failed) for this customer profile." ::= { crpmsCpEntry 6 } crpmsCpAttemptedOverflowCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of attempted overflow calls (both successful and failed) for this customer profile." ::= { crpmsCpEntry 7 } crpmsCpRejections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Total number of rejected calls for this customer profile (crpmsCpOverflowRejections plus rejections due to unavailable resources)." ::= { crpmsCpEntry 8 } crpmsCpOverflowRejections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of rejected overflow calls for this customer profile." ::= { crpmsCpEntry 9 } crpmsCpLimitThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold defined for the customer profile limit (crpmsCpLimit). It represents the percentage of the limit which, when crossed triggers a crpmsRisingAlarm or a crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more details). A value of 100 percent cannot be exceeded and therefore disables this threshold setting. A value of 0 percent is always exceeded. " DEFVAL { 100 } ::= { crpmsCpEntry 10 } crpmsCpOverflowLimitThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold defined for the customer profile overflow limit (crpmsCpOverflowLimit). It represents the percentage of the limit that when exceeded triggers a crpmsRisingAlarm or a crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more details). A value of 100 percent cannot be exceeded and therefore disables this threshold setting. A value of 0 percent is always exceeded. " DEFVAL { 100 } ::= { crpmsCpEntry 11 } crpmsCpCallRejectionThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold defined for the number of customer profile rejected calls (crpmsCpRejections) as a percentage of the number of attempted calls (crpmsCpAttemptedCalls) which, when crossed, triggers a crpmsRisingAlarm or crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more details). A value of 100 percent cannot be exceeded and therefore disables this threshold setting. A value of 0 percent is always exceeded. " DEFVAL { 100 } ::= { crpmsCpEntry 12 } crpmsCpOverflowRejectThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold defined for the number of customer profile rejected overflow calls (crpmsCpOverflowRejections) as a percentage of the number of attempted overflow calls (crpmsCpAttemptedOverflowCalls) which, when crossed, triggers a crpmsRisingAlarm or a crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more details). A value of 100 percent cannot be exceeded and therefore disables this threshold setting. A value of 0 percent is always exceeded. " DEFVAL { 100 } ::= { crpmsCpEntry 13 } crpmsCpEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, delete or modify this row. None of the columnar objects can be modified except this one, when the row is active." ::= { crpmsCpEntry 14 } -- -- -- RPMS VPDN object group -- -- crpmsVpdnGroupTable OBJECT-TYPE SYNTAX SEQUENCE OF CrpmsVpdnGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VPDN group manages a number of sessions. A VPDN session may use a MLP link, which is contained within a particular MLP bundle. A VPDN group has a limit of maximal sessions, the number of bundles that this VPDN group can allocate, and the number of links for each bundle. The VPDN group table contains information about VPDN group of a RPMS server, each group a row. If a row is added or removed, its corresponding row in the crpmsVpdnGroupCpTable has to be added or removed as well." ::= { crpmsVpdn 1 } crpmsVpdnGroupEntry OBJECT-TYPE SYNTAX CrpmsVpdnGroupEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VPDN group entry contains information about a specific VPDN group. VPDN groups contain the necessary setting to establish a VPDN session (tunneling protocol, home gateway information, and other data) as well as limits on various parameters (maximum concurrent sessions, MLP bundles, etc.)." INDEX { IMPLIED crpmsVpdnGroupName } ::= { crpmsVpdnGroupTable 1 } CrpmsVpdnGroupEntry ::= SEQUENCE { crpmsVpdnGroupName SnmpAdminString, crpmsVpdnTunnelId SnmpAdminString, crpmsVpdnTunnelProtocol INTEGER, crpmsVpdnLimit Unsigned32, crpmsVpdnOverflowLimit Unsigned32, crpmsVpdnMlpBundleLimit Unsigned32, crpmsVpdnLinksPerBundleLimit Unsigned32, crpmsVpdnBundles Gauge32, crpmsVpdnActiveCalls Gauge32, crpmsVpdnActiveOverflowCalls Gauge32, crpmsVpdnRejections Counter32, crpmsVpdnSizeRejections Counter32, crpmsVpdnLimitThreshold Unsigned32, crpmsVpdnEntryStatus RowStatus } crpmsVpdnGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the VPDN group. This name uniquely identifies a VPDN group in the RPMS system." ::= { crpmsVpdnGroupEntry 1 } crpmsVpdnTunnelId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The tunnel Id of the VPDN group. For Cisco IOS 12.05T and later, the tunnel id matches the remote name configured on the HGW router. The following is an example: vpdn-group 1 accept dialin l2tp virtual-template 1 remote isp1 local name hg For old Cisco IOS releases, the tunnel id matches the incoming statement: vpdn incoming isp1 hgw virtual-template 1 In above examples, the object has the value isp1. " ::= { crpmsVpdnGroupEntry 2 } crpmsVpdnTunnelProtocol OBJECT-TYPE SYNTAX INTEGER { l2f (1), l2tp (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The protocol used by the tunnel of the VPDN group. There are only 2 possible value: l2f - Layer 2 Forwarding Protocol l2tp - Layer 2 Tunneling Protocol " DEFVAL { l2f } ::= { crpmsVpdnGroupEntry 3 } crpmsVpdnLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Limit of the resource pool for this VPDN group." DEFVAL { 0 } ::= { crpmsVpdnGroupEntry 4 } crpmsVpdnOverflowLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Limit of the overflow pool for this VPDN group." DEFVAL { 0 } ::= { crpmsVpdnGroupEntry 5 } crpmsVpdnMlpBundleLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Limit of MLP (multilink protocol) bundles for this VPDN group." DEFVAL { 0 } ::= { crpmsVpdnGroupEntry 6 } crpmsVpdnLinksPerBundleLimit OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "Limit of links per bundle for this VPDN group." DEFVAL { 0 } ::= { crpmsVpdnGroupEntry 7 } crpmsVpdnBundles OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active MLP bundles in the tunnel of the VPDN group." ::= { crpmsVpdnGroupEntry 8 } crpmsVpdnActiveCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active calls that belong to this VPDN group." ::= { crpmsVpdnGroupEntry 9 } crpmsVpdnActiveOverflowCalls OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of active overflow calls that belong to this VPDN group." ::= { crpmsVpdnGroupEntry 10 } crpmsVpdnRejections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of calls rejected because one of the group limits (crpmsVpdnOverflowLimit, crpmsVpdnMlpBundleLimit and crpmsVpdnLinksPerBundleLimit) was exceeded." ::= { crpmsVpdnGroupEntry 11 } crpmsVpdnSizeRejections OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of rejected calls of the VPDN group, because the max allowed size limit (crpmsVpdnOverflowLimit + crpmsVpdnLimit) was exceeded." ::= { crpmsVpdnGroupEntry 12 } crpmsVpdnLimitThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "A threshold defined for the vpdn group limit (crpmsVpdnLimit) which, when crossed, triggers a crpmsRisingAlarm or a crpmsFallingAlarm notification (refer to the notification definitions in this MIB for more details). A value of 100 percent cannot be exceeded and therefore disables this threshold setting. A value of 0 percent is always exceeded. " DEFVAL { 100 } ::= { crpmsVpdnGroupEntry 13 } crpmsVpdnEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, delete or modify this row. None of the columnar objects can be modified except this one, when the row is active." ::= { crpmsVpdnGroupEntry 14 } crpmsVpdnGroupCpTable OBJECT-TYPE SYNTAX SEQUENCE OF CrpmsVpdnGroupCpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VPDN group can be associated with a number of customer profiles, this table represents this relationship. It's double indexed by index of crpmsVpdnGroupTable and index of crpmsCpTable. If rows are added to or removed from one of two tables, Its corresponding row(s) in this table will be added or removed as well." ::= { crpmsVpdn 2 } crpmsVpdnGroupCpEntry OBJECT-TYPE SYNTAX CrpmsVpdnGroupCpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A VPDN group customer profile entry contains information of SLA associated with this VPDN group." INDEX { crpmsVpdnGroupCpVpdnGroupName, IMPLIED crpmsVpdnGroupCpCpName } ::= { crpmsVpdnGroupCpTable 1 } CrpmsVpdnGroupCpEntry ::= SEQUENCE { crpmsVpdnGroupCpVpdnGroupName SnmpAdminString, crpmsVpdnGroupCpCpName SnmpAdminString, crpmsVpdnGroupCpEntryStatus RowStatus } crpmsVpdnGroupCpVpdnGroupName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of VPDN groups in the table." ::= { crpmsVpdnGroupCpEntry 1 } crpmsVpdnGroupCpCpName OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (1..31)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of customer profile in the table." ::= { crpmsVpdnGroupCpEntry 2 } crpmsVpdnGroupCpEntryStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Used to create, delete or modify this row. None of the columnar objects can be modified except this one, when the row is active." ::= { crpmsVpdnGroupCpEntry 3 } -- -- -- RPMS Notification object group -- -- crpmsAlarmObject OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object identifier of the destination object related to the notification. For example, if crpmsCpLimitThreshold is crossed, this variable should have the OID of crpmsCpLimit." ::= { crpmsNotif 1 } crpmsAlarmValue OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The current value that caused the threshold alarm to be sent." ::= { crpmsNotif 2 } crpmsAlarmThresholdObject OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The object identifier of the Threshold that is related to the notification. For example, if crpmsCpLimitThreshold is crossed, this variable should have the OID of crpmsCpLimitThreshold." ::= { crpmsNotif 3 } -- -- -- RPMS Notification group -- -- ciscoRpmsMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoRpmsMIB 2 } ciscoRpmsMIBNotifications OBJECT IDENTIFIER ::= { ciscoRpmsMIBNotificationPrefix 0 } crpmsRisingAlarm NOTIFICATION-TYPE OBJECTS { crpmsAlarmObject, crpmsAlarmValue, crpmsAlarmThresholdObject } STATUS current DESCRIPTION "This trap is generated to notify the manager(s) that one of the thresholds is crossed in rising direction (exceeded). The same trap will not be generated until the sample value falls below the threshold low water mark and rises to cross it again. NOTE: A threshold low water mark is by default 90% of the actual threshold percentage (threshold * 90%) integer rounded. " ::= { ciscoRpmsMIBNotifications 1 } crpmsFallingAlarm NOTIFICATION-TYPE OBJECTS { crpmsAlarmObject, crpmsAlarmValue, crpmsAlarmThresholdObject } STATUS current DESCRIPTION "This trap is generated to notify the manager(s) that one of the thresholds is crossed in the falling direction (reaches the threshold low water mark after being exceeded). The same trap will not be generated until the sample value rises above the threshold and reaches the low water mark again. NOTE: A threshold low water mark is by default 90% of the actual threshold percentage (threshold * 90%) integer rounded. " ::= { ciscoRpmsMIBNotifications 2 } -- -- -- Conformance -- -- ciscoRpmsMIBConformance OBJECT IDENTIFIER ::= { ciscoRpmsMIB 3 } ciscoRpmsMIBCompliances OBJECT IDENTIFIER ::= { ciscoRpmsMIBConformance 1 } ciscoRpmsMIBGroups OBJECT IDENTIFIER ::= { ciscoRpmsMIBConformance 2 } -- -- -- Compliance -- -- ciscoRpmsMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco-RPMS-MIB" MODULE -- this module MANDATORY-GROUPS { crpmsSystemGroup, crpmsCpGroup, crpmsVpdnGroup, crpmsNotifGroup, crpmsThresholdNotifGroup } OBJECT crpmsSubsystemName MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsSubsystemUptime MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsCpActiveCalls MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsCpActiveOverflowCalls MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsCpAttemptedCalls MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsCpAttemptedOverflowCalls MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsCpRejections MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsCpOverflowRejections MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsVpdnTunnelId MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsVpdnBundles MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsVpdnActiveCalls MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsVpdnActiveOverflowCalls MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsVpdnRejections MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT crpmsVpdnSizeRejections MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { ciscoRpmsMIBCompliances 1 } -- -- -- units of conformance -- -- crpmsSystemGroup OBJECT-GROUP OBJECTS { crpmsSubsystemName, crpmsSubsystemUptime } STATUS current DESCRIPTION "This group contains a table providing the general system level information." ::= { ciscoRpmsMIBGroups 1 } crpmsCpGroup OBJECT-GROUP OBJECTS { crpmsCpLimit, crpmsCpOverflowLimit, crpmsCpActiveCalls, crpmsCpActiveOverflowCalls, crpmsCpAttemptedCalls, crpmsCpAttemptedOverflowCalls, crpmsCpRejections, crpmsCpOverflowRejections, crpmsCpLimitThreshold, crpmsCpOverflowLimitThreshold, crpmsCpCallRejectionThreshold, crpmsCpOverflowRejectThreshold, crpmsCpEntryStatus } STATUS current DESCRIPTION "This group contains a table providing the information of customer profile." ::= { ciscoRpmsMIBGroups 2 } crpmsVpdnGroup OBJECT-GROUP OBJECTS { crpmsVpdnTunnelId, crpmsVpdnTunnelProtocol, crpmsVpdnLimit, crpmsVpdnOverflowLimit, crpmsVpdnMlpBundleLimit, crpmsVpdnLinksPerBundleLimit, crpmsVpdnBundles, crpmsVpdnActiveCalls, crpmsVpdnActiveOverflowCalls, crpmsVpdnRejections, crpmsVpdnSizeRejections, crpmsVpdnLimitThreshold, crpmsVpdnEntryStatus, crpmsVpdnGroupCpEntryStatus } STATUS current DESCRIPTION "This group contains tables providing the information of VPDN." ::= { ciscoRpmsMIBGroups 3 } crpmsNotifGroup OBJECT-GROUP OBJECTS { crpmsAlarmObject, crpmsAlarmValue, crpmsAlarmThresholdObject } STATUS current DESCRIPTION "This group contains helper objects specifying notifications." ::= { ciscoRpmsMIBGroups 4 } crpmsThresholdNotifGroup NOTIFICATION-GROUP NOTIFICATIONS { crpmsRisingAlarm, crpmsFallingAlarm } STATUS current DESCRIPTION "This group contains threshold crossing related alarms and notifications." ::= { ciscoRpmsMIBGroups 5 } END