-- ***************************************************************** -- CISCO-NDE-MIB.my -- -- July 2001, Jayakumar Kadirvelu -- -- -- Copyright (c) 2001 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** -- CISCO-NDE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI InetAddressType, InetAddress FROM INET-ADDRESS-MIB RowStatus FROM SNMPv2-TC; ciscoNDEMIB MODULE-IDENTITY LAST-UPDATED "200603010000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-snmp@cisco.com" DESCRIPTION "The Netflow Data Export (NDE) MIB provides instrumentation for configuration and operation of the Netflow Data Export feature. A network flow is defined as an unidirectional sequence of packets between a given source and destination endpoints. Network flows are highly granular; flow endpoints are identified both by IP address as well as by transport layer application port numbers. NetFlow also utilizes the IP Protocol type, Type of Service (ToS) and the input interface identifier to uniquely identify flows. Netflow Data Export refers to the export of Netflow Data using UDP packets to Netflow Data Collector(s). A NetFlow Data Collector (NDC) captures, filters, aggregates, and stores the data from multiple NetFlow enabled devices. NDCs provide fast, scalable, and economical Netflow data." REVISION "200603010000Z" DESCRIPTION "Moved cndeCollectorStatus and cndeCollectorAddress from OBJECT clause to DESCRIPTION clause of MODULE COMPLIANCE." REVISION "200512060000Z" DESCRIPTION "Imported Unsigned32 from SNMPv2-SMI instead of CISCO-TC" REVISION "200108080000Z" DESCRIPTION "Initial version of this MIB module." ::= { ciscoMgmt 226 } ciscoNDEMIBObjects OBJECT IDENTIFIER ::= { ciscoNDEMIB 1 } cndeCollectorConfiguration OBJECT IDENTIFIER ::= { ciscoNDEMIBObjects 1 } -- Textual Conventions -- No Textual Conventions -- -- Collector Configuration objects -- cndeMaxCollectors OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Maximum number of entries allowed in the cndeCollectorTable. A zero indicates unlimitted number of entries. The agent should set this value during initialization, and the vaule for this object cannot be changed during the system's operation" ::= { cndeCollectorConfiguration 1 } cndeCollectorTable OBJECT-TYPE SYNTAX SEQUENCE OF CndeCollectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A control table to configure the NDE collectors. The maximum number of entries is limited by cndeMaxCollectors. The agent sends the NDE packets to each address configured in this table." ::= { cndeCollectorConfiguration 2 } cndeCollectorEntry OBJECT-TYPE SYNTAX CndeCollectorEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A conceptual row in the cndeCollectorEntry." INDEX { cndeCollectorAddressType, cndeCollectorAddress, cndeCollectorPort } ::= { cndeCollectorTable 1 } CndeCollectorEntry ::= SEQUENCE { cndeCollectorAddressType InetAddressType, cndeCollectorAddress InetAddress, cndeCollectorPort Integer32, cndeCollectorStatus RowStatus } cndeCollectorAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of Internet address used by this entry" ::= { cndeCollectorEntry 1 } cndeCollectorAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Internet address of the collector. This is the address which the Netflow data is exported to." ::= { cndeCollectorEntry 2 } cndeCollectorPort OBJECT-TYPE SYNTAX Integer32 (1..65535) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The transport port of the collector which the Netflow data is exported to." ::= { cndeCollectorEntry 3 } cndeCollectorStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status object used to manage the rows in this table." ::= { cndeCollectorEntry 4 } -- An obsolete OID subtree cndeMIBNotifications OBJECT IDENTIFIER ::= { ciscoNDEMIB 2 } -- An OID subtree for notifications, if and when any need to be defined cndeMIBNotifs OBJECT IDENTIFIER ::= { ciscoNDEMIB 0 } -- Conformance and Compliance cndeMIBConformance OBJECT IDENTIFIER ::= { ciscoNDEMIB 3 } cndeMIBCompliances OBJECT IDENTIFIER ::= { cndeMIBConformance 1 } cndeMIBGroups OBJECT IDENTIFIER ::= { cndeMIBConformance 2 } -- Conformance cndeMIBCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for the CISCO-NDE-MIB. Objects used in an INDEX clause normally have a MAX-ACCESS of 'not-accessible', and the SMIv2 does not allow 'not-accessible' objects to be included in a GROUP clause. Consequently, a minimum syntax cannot be specified for them in an OBJECT clause. So, the following minimum compliance is specified within this DESCRIPTION clause: --OBJECT cndeCollectorAddressType --SYNTAX InetAddressType { ipv4(1) } --DESCRIPTION -- An implementation is only required to support IPv4 -- addresses. --OBJECT cndeCollectorAddress --SYNTAX InetAddress { SIZE(4) } --DESCRIPTION -- An implementation is only required to support IPv4 -- addresses. " MODULE -- this module MANDATORY-GROUPS { cndeCollectorConfigurationGroup } OBJECT cndeCollectorStatus SYNTAX -- a subset of RowStatus INTEGER { active(1), createAndGo(4), destroy(6) } DESCRIPTION "Support for 'createAndWait' is not required." ::= { cndeMIBCompliances 1 } -- Units of Conformance cndeCollectorConfigurationGroup OBJECT-GROUP OBJECTS { cndeMaxCollectors, cndeCollectorStatus } STATUS current DESCRIPTION "A collection of objects for configuring the Netflow Data Export Collectors and ports." ::= { cndeMIBGroups 1 } END