-- ***************************************************************** -- CISCO-ISDN-MIB.my: Cisco ISDN MIB file -- -- January 1995, Fred Baker, Bibek A. Das -- -- Copyright (c) 1995-1996, 1999, 2000, 2001, 2002 by cisco Systems, Inc. -- All rights reserved. -- -- ***************************************************************** CISCO-ISDN-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, NOTIFICATION-TYPE, Counter32, OBJECT-TYPE, Integer32 FROM SNMPv2-SMI DisplayString, TimeStamp, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF ciscoMgmt FROM CISCO-SMI ifIndex FROM IF-MIB isdnLapdOperStatus, isdnSignalingIndex, isdnSignalingIfIndex FROM ISDN-MIB; ciscoIsdnMib MODULE-IDENTITY LAST-UPDATED "200102090000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO " Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-isdn@cisco.com" DESCRIPTION "The MIB module to describe the status of the ISDN Interfaces on the routers." REVISION "200102090000Z" DESCRIPTION "For a call connects, demandNbrLastDuration, demandNbrClearReason, and demandNbrClearCode objects are not included in the trap." REVISION "200003270000Z" DESCRIPTION "Added demandNbrCNANotification when call rejected with channel not available cause code" REVISION "200002230000Z" DESCRIPTION "Removed an instantiated clause in description for ciscoCallHistoryCallingNumber." REVISION "9905070000Z" DESCRIPTION "Added a new trap for PRI layer 2 state changes." REVISION "9602210000Z" DESCRIPTION "Add a new object demandNbrCallOrigin." REVISION "9508150000Z" DESCRIPTION "Specify a correct (non-negative) range for an index object." REVISION "9501300000Z" DESCRIPTION "Initial version of Cisco ISDN MIB." ::= { ciscoMgmt 26 } -- The ISDN hardware interface (BRI or PRI) will be represented -- by the D channel. This will have an ifType value of basicISDN(20) -- or primaryISDN(21), refer to RFC 1213. Each B channel will -- also be represented in an an entry in the ifTable. The B -- channels will have an ifType value of other(1). -- This model will be used while defining objects and tables -- for management. -- The ISDN MIB will allow sub-layers. For example, the data transfer -- over a B channel may take place with PPP encapsulation. While the -- ISDN MIB will describe the B channel, a media specific MIB for -- PPP can be used on a layered basis. This will be as per RFC 1573. -- The isdn call information will be stored in the neighbor table -- Isdn Mib objects definitions ciscoIsdnMibObjects OBJECT IDENTIFIER ::= { ciscoIsdnMib 1 } isdnNeighbor OBJECT IDENTIFIER ::= { ciscoIsdnMibObjects 1 } demandNbrTable OBJECT-TYPE SYNTAX SEQUENCE OF DemandNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The list of neighbors from which the router will accept calls or to which it will place them." ::= { isdnNeighbor 1 } demandNbrEntry OBJECT-TYPE SYNTAX DemandNbrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single Neighbor. This entry is effectively permanent, and contains information describing the neighbor, his permissions, his last call attempt, and his cumulative effects." INDEX {demandNbrPhysIf, demandNbrId } ::= { demandNbrTable 1 } DemandNbrEntry ::= SEQUENCE { demandNbrPhysIf Integer32 (1..2147483647), -- ifIndex value -- of the D channel demandNbrId Integer32 (0..2147483647), -- sequence number demandNbrLogIf Integer32 (1..2147483647), -- ifIndex value of -- virtual interface demandNbrName DisplayString, -- name of the neighbor demandNbrAddress DisplayString, -- Call Address demandNbrPermission INTEGER, -- applicable permissions demandNbrMaxDuration Integer32 (1..2147483647), -- Max call duration -- in seconds demandNbrLastDuration Integer32 (1..2147483647), -- Duration of last -- call demandNbrClearReason DisplayString, -- reason last call completed demandNbrClearCode OCTET STRING, -- reason last call completed demandNbrSuccessCalls Counter32, -- number of completed calls to -- neighbor demandNbrFailCalls Counter32, -- number of failed call attempts demandNbrAcceptCalls Counter32, -- number of calls from neighbor -- accepted demandNbrRefuseCalls Counter32, -- number of calls from neighbor -- refused demandNbrLastAttemptTime TimeStamp, -- sysUpTime of last -- call attempt demandNbrStatus RowStatus, demandNbrCallOrigin INTEGER } demandNbrPhysIf OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "ifIndex value of the physical interface the neighbor will be called on. On an ISDN interface, this is the ifIndex value of the D channel." ::= { demandNbrEntry 1 } demandNbrId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "arbitrary sequence number associated with the neighbor." ::= { demandNbrEntry 2 } demandNbrLogIf OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS read-create STATUS current DESCRIPTION "ifIndex value of virtual interface associated with the neighbor. This interface maintains a queue of messages holding for the neighbor awaiting call completion, and all statistics." ::= { demandNbrEntry 3 } demandNbrName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "ASCII name of the neighbor." ::= { demandNbrEntry 4 } demandNbrAddress OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "Call Address at which the neighbor should be called. Think of this as the set of characters following 'ATDT ' or the 'phone number' included in a D channel call request." ::= { demandNbrEntry 5 } demandNbrPermission OBJECT-TYPE SYNTAX INTEGER { iCanCallHim (1), heCanCallMe (2), weCanCallEachOther (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "applicable permissions." DEFVAL { weCanCallEachOther } ::= { demandNbrEntry 6 } demandNbrMaxDuration OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "Maximum call duration in seconds." DEFVAL { 2147483647 } ::= { demandNbrEntry 7 } demandNbrLastDuration OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Duration of last call in seconds." ::= { demandNbrEntry 8 } demandNbrClearReason OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "ASCII reason that the last call terminated." ::= { demandNbrEntry 9 } demandNbrClearCode OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "encoded reason for the last call tear down." ::= { demandNbrEntry 10 } demandNbrSuccessCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "number of completed calls to neighbor since system reset." ::= { demandNbrEntry 11 } demandNbrFailCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of call attempts that have failed." ::= { demandNbrEntry 12 } demandNbrAcceptCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls accepted from the neighbor." ::= { demandNbrEntry 13 } demandNbrRefuseCalls OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of calls from neighbor that we have refused." ::= { demandNbrEntry 14 } demandNbrLastAttemptTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "sysUpTime of last call attempt." ::= { demandNbrEntry 15 } demandNbrStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Somebody might want to manage the device using SNMP some day..." ::= { demandNbrEntry 16 } demandNbrCallOrigin OBJECT-TYPE SYNTAX INTEGER { originate(1), answer(2), callback(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Indication of outgoing or incoming call." ::= { demandNbrEntry 17 } -- Traps related to Connection management ciscoIsdnMibTrapPrefix OBJECT IDENTIFIER ::= { ciscoIsdnMib 2 } ciscoIsdnMibTraps OBJECT IDENTIFIER ::= { ciscoIsdnMibTrapPrefix 0 } demandNbrCallInformation NOTIFICATION-TYPE OBJECTS { demandNbrLogIf, demandNbrName, demandNbrAddress, demandNbrLastDuration, demandNbrClearReason, demandNbrClearCode } STATUS obsolete DESCRIPTION "This trap/inform is sent to the manager whenever a successful call clears, or a failed call attempt is determined to have ultimately failed. In the event that call retry is active, then this is after all retry attempts have failed. However, only one such trap is sent in between successful call attempts; subsequent call attempts result in no trap." ::= { ciscoIsdnMibTraps 1 } demandNbrCallDetails NOTIFICATION-TYPE OBJECTS { demandNbrLogIf, demandNbrName, demandNbrAddress, demandNbrLastDuration, demandNbrClearReason, demandNbrClearCode, demandNbrCallOrigin } STATUS current DESCRIPTION "This trap/inform is sent to the manager whenever a call connects, or clears, or a failed call attempt is determined to have ultimately failed. In the event that call retry is active, then this is after all retry attempts have failed. However, only one such trap is sent in between successful call attempts; subsequent call attempts result in no trap. Whenever a call connects, demandNbrLastDuration, demandNbrClearReason, and demandNbrClearCode objects are not included in the trap." ::= { ciscoIsdnMibTraps 2 } demandNbrLayer2Change NOTIFICATION-TYPE OBJECTS { ifIndex, isdnLapdOperStatus } STATUS current DESCRIPTION "This trap/inform is sent to the manager whenever the D-channel of an interface changes state." ::= { ciscoIsdnMibTraps 3 } demandNbrCNANotification NOTIFICATION-TYPE OBJECTS { isdnSignalingIfIndex, ifIndex } STATUS current DESCRIPTION "This trap/inform is sent to the manager whenever the an incoming call request is rejected with cause 'requested circuit/channel not available' (CNA), code number 44. isdnSignalingIfIndex is the ifIndex value of the interface associated with this signaling channel. ifIndex is the interface index of the requested bearer channel " ::= { ciscoIsdnMibTraps 4 } -- conformance information ciscoIsdnMibConformance OBJECT IDENTIFIER ::= { ciscoIsdnMib 3 } ciscoIsdnMibCompliances OBJECT IDENTIFIER ::= { ciscoIsdnMibConformance 1 } ciscoIsdnMibGroups OBJECT IDENTIFIER ::= { ciscoIsdnMibConformance 2 } -- compliance statements ciscoIsdnMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco ISDN MIB" MODULE -- this module MANDATORY-GROUPS { ciscoIsdnMibGroup } ::= { ciscoIsdnMibCompliances 1 } ciscoIsdnMibComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for entities which implement the Cisco ISDN MIB" MODULE -- this module MANDATORY-GROUPS { ciscoIsdnMibGroupRev1 } ::= { ciscoIsdnMibCompliances 2 } -- units of conformance ciscoIsdnMibGroup OBJECT-GROUP OBJECTS { demandNbrLogIf, demandNbrName, demandNbrAddress, demandNbrPermission, demandNbrMaxDuration, demandNbrLastDuration, demandNbrClearReason, demandNbrClearCode, demandNbrSuccessCalls, demandNbrFailCalls, demandNbrAcceptCalls, demandNbrRefuseCalls, demandNbrLastAttemptTime, demandNbrStatus } STATUS current DESCRIPTION "A collection of objects providing the ISDN MIB capability." ::= { ciscoIsdnMibGroups 1 } ciscoIsdnMibGroupRev1 OBJECT-GROUP OBJECTS { demandNbrLogIf, demandNbrName, demandNbrAddress, demandNbrPermission, demandNbrMaxDuration, demandNbrLastDuration, demandNbrClearReason, demandNbrClearCode, demandNbrSuccessCalls, demandNbrFailCalls, demandNbrAcceptCalls, demandNbrRefuseCalls, demandNbrLastAttemptTime, demandNbrStatus, demandNbrCallOrigin } STATUS current DESCRIPTION "A collection of objects providing the call origin capability." ::= { ciscoIsdnMibGroups 2 } END