-- ***************************************************************** -- CISCO-IF-LINK-CONFIG-MIB.my: Interface Link Configuration MIB -- -- March 2000, Subra Hegde -- -- Copyright (c) 2000 by cisco Systems, Inc. -- All rights reserved. -- ***************************************************************** CISCO-IF-LINK-CONFIG-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB CiscoLocationSpecifier FROM CISCO-TC ciscoMgmt FROM CISCO-SMI; ciscoIfLinkConfigMIB MODULE-IDENTITY LAST-UPDATED "200110050000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems Customer Service Postal: 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-wanatm@cisco.com" DESCRIPTION "The MIB module for configuration of bulk distribution (de-multiplexing of traffic from higher-bandwidth to lower-bandwidth interfaces). Terminology : bulk-distribution : The bulk distribution is the feature by which a line/interface on one module can replace the line for the other. bulk-distribution module : The module which links its interfaces to the target module. target module : A module that gets incoming traffic from a bulk distribution module rather than from a back card. The Module which supports bulk distribution, converts traffic from its lines (may be T3, OC-N) to lines on the target module (may be T3, T1 etc). The bulk distribution is achieved by having a point-to-point connection (bulk-distribution bus) between the bulk-distribution module and the target module. The benefit of bulk distribution is that the target module need not have the back cards. The lines/interfaces from bulk-distribution module will be used as lines for the target module. An example is given here on linking interfaces. |------------------------------------------------| | | | |------------------------------| | | | | | | | | | |-------------| | | Ta|rget Module | | | | | ------- ------- ------- --------------- | | | | | | | | | | | | | | | | | T1 | | T1 | |T1 | | Bulk | |card | |card | |card | | Distribution | | | | | | | | | | | | | | | | Module | | | | | | | | | | | | | | | | (T3 card) | | | | | | | | | ------- ------- ------- --------------- " REVISION "200110050000Z" DESCRIPTION "Add object cilTargetModuleFramingType in cilConfTable table" REVISION "200009140000Z" DESCRIPTION "Initial version of this MIB module" ::= { ciscoMgmt 175 } cilConfigMIBObjects OBJECT IDENTIFIER ::= { ciscoIfLinkConfigMIB 1 } cilConfig OBJECT IDENTIFIER ::= { cilConfigMIBObjects 1 } -- Interface Link configuration table cilConfTable OBJECT-TYPE SYNTAX SEQUENCE OF CilConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The interface link configuration table." ::= { cilConfig 1 } cilConfEntry OBJECT-TYPE SYNTAX CilConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the cilConfTable. This entry is used for linking an interface identified by cilSourceInterface to an interface identified by cilTaregetModuleInterface. The entries are created and deleted using the cilRowStatus object. An interface on the bulk-distribution module cannot be linked to multiple interfaces in the target module." INDEX { cilSourceInterface } ::= { cilConfTable 1 } CilConfEntry ::= SEQUENCE { cilSourceInterface InterfaceIndex, cilTargetModuleInterface CiscoLocationSpecifier, cilRowStatus RowStatus, cilTargetModuleFramingType INTEGER } cilSourceInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "An interface of the bulk-distribution module (Source) which will be linked with the interface of the target module. It represents an entry in the ifTable." ::= { cilConfEntry 1 } cilTargetModuleInterface OBJECT-TYPE SYNTAX CiscoLocationSpecifier MAX-ACCESS read-create STATUS current DESCRIPTION "Location of the managed entity on the target module. Following is the supported format for this object and all the values must be present. shelf=, slot=, subSlot= port =. The zero length value for this object is not supported." ::= { cilConfEntry 2 } cilRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to create a new row or modify or delete an existing row in the table. The cilTargetModuleFramingType need not be specified to create a row. If cilTargetModuleFramingType is not specified, a default value will be assumed as described in the description of cilTargetModuleFramingType." ::= { cilConfEntry 3 } cilTargetModuleFramingType OBJECT-TYPE SYNTAX INTEGER { notApplicable(1), dsx1D4(2), dsx1ESF(3) } MAX-ACCESS read-create STATUS current DESCRIPTION "This object identifies the framing type of the target interface. notApplicable(1) can not be set. dsx1ESF Extended SuperFrame DS1 (T1.107) dsx1D4 AT&T D4 format DS1 (T1.107) Default value is dsx1ESF(3) if cilTargetModuleInterface is a T1 interface and sonet/sdh byte-synchronous mapping is used on the cilSourceInterface. Otherwise, the default value is notApplicable(1). " ::= { cilConfEntry 4 } -- notifications -- conformance information cilConfigMIBConformance OBJECT IDENTIFIER ::= { ciscoIfLinkConfigMIB 3 } cilConfigMIBCompliances OBJECT IDENTIFIER ::= { cilConfigMIBConformance 1 } cilConfigMIBGroups OBJECT IDENTIFIER ::= { cilConfigMIBConformance 2 } cilConfigMIBCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The Compliance statement for interface link configuration group. This has been replaced by the cilConfigMIBComplianceRev1 statement." MODULE -- this module MANDATORY-GROUPS { cilConfMIBGroup } ::= { cilConfigMIBCompliances 1 } cilConfigMIBComplianceRev1 MODULE-COMPLIANCE STATUS current DESCRIPTION "The Compliance statement for interface link configuration group. This statement replaces cilConfigMIBCompliance statement." MODULE -- this module MANDATORY-GROUPS { cilConfMIBGroupRev1 } OBJECT cilTargetModuleFramingType MIN-ACCESS not-accessible DESCRIPTION "Required only for systems that support target interfaces whose types are T1 and whose source interfaces are sonet/sdh using byte-synchronous virtual tributary mapping." ::= { cilConfigMIBCompliances 2 } -- units of conformance cilConfMIBGroup OBJECT-GROUP OBJECTS { cilTargetModuleInterface, cilRowStatus } STATUS deprecated DESCRIPTION "These are objects related to interface link configuration group. This group has been replaced by cilConfMIBGroupRev1." ::= { cilConfigMIBGroups 1} cilConfMIBGroupRev1 OBJECT-GROUP OBJECTS { cilTargetModuleInterface, cilRowStatus, cilTargetModuleFramingType } STATUS current DESCRIPTION "These are objects related to interface link configuration group. This group replaces the cilConfMIBGroup." ::= { cilConfigMIBGroups 2} END